void
puc_common_attach(struct puc_softc *sc, struct puc_attach_args *paa)
{
const struct puc_device_description *desc = sc->sc_desc;
int i, bar;
/* Configure each port. */
for (i = 0; i < PUC_MAX_PORTS; i++) {
if (desc->ports[i].type == 0) /* neither com or lpt */
continue;
/* make sure the base address register is mapped */
bar = PUC_PORT_BAR_INDEX(desc->ports[i].bar);
if (!sc->sc_bar_mappings[bar].mapped) {
printf("%s: %s port uses unmapped BAR (0x%x)\n",
sc->sc_dev.dv_xname,
puc_port_type_name(desc->ports[i].type),
desc->ports[i].bar);
continue;
}
/* set up to configure the child device */
paa->port = i;
paa->a = sc->sc_bar_mappings[bar].a;
paa->t = sc->sc_bar_mappings[bar].t;
paa->type = desc->ports[i].type;
if (desc->ports[i].offset >= sc->sc_bar_mappings[bar].s ||
bus_space_subregion(sc->sc_bar_mappings[bar].t,
sc->sc_bar_mappings[bar].h, desc->ports[i].offset,
sc->sc_bar_mappings[bar].s - desc->ports[i].offset,
&paa->h)) {
printf("%s: couldn't get subregion for port %d\n",
sc->sc_dev.dv_xname, i);
continue;
}
#if 0
if (autoconf_verbose)
printf("%s: port %d: %s @ (index %d) 0x%x "
"(0x%lx, 0x%lx)\n", sc->sc_dev.dv_xname, paa->port,
puc_port_type_name(paa->type), bar, (int)paa->a,
(long)paa->t, (long)paa->h);
#endif
/* and configure it */
sc->sc_ports[i].dev = config_found_sm(&sc->sc_dev, paa,
puc_print, puc_submatch);
}
}
static void
puc_attach(device_t parent, device_t self, void *aux)
{
struct puc_softc *sc = device_private(self);
struct pci_attach_args *pa = aux;
struct puc_attach_args paa;
pci_intr_handle_t intrhandle;
pcireg_t subsys;
int i, barindex;
bus_addr_t base;
bus_space_tag_t tag;
#ifdef PUCCN
bus_space_handle_t ioh;
#endif
int locs[PUCCF_NLOCS];
subsys = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG);
sc->sc_desc = puc_find_description(PCI_VENDOR(pa->pa_id),
PCI_PRODUCT(pa->pa_id), PCI_VENDOR(subsys), PCI_PRODUCT(subsys));
if (sc->sc_desc == NULL) {
/*
* This was a class/subclass match, so tell people to compile
* kernel with options that cause this driver to spew.
*/
#ifdef PUC_PRINT_REGS
printf(":\n");
pci_conf_print(pa->pa_pc, pa->pa_tag, NULL);
#else
printf(": unknown PCI communications device\n");
printf("%s: compile kernel with PUC_PRINT_REGS and larger\n",
device_xname(self));
printf("%s: mesage buffer (via 'options MSGBUFSIZE=...'),\n",
device_xname(self));
printf("%s: and report the result with send-pr\n",
device_xname(self));
#endif
return;
}
printf(": %s (", sc->sc_desc->name);
for (i = 0; PUC_PORT_VALID(sc->sc_desc, i); i++)
printf("%s%s", i ? ", " : "",
puc_port_type_name(sc->sc_desc->ports[i].type));
printf(")\n");
for (i = 0; i < 6; i++) {
pcireg_t bar, type;
sc->sc_bar_mappings[i].mapped = 0;
bar = pci_conf_read(pa->pa_pc, pa->pa_tag,
PCI_MAPREG_START + 4 * i); /* XXX const */
if (bar == 0) /* BAR not implemented(?) */
continue;
type = (PCI_MAPREG_TYPE(bar) == PCI_MAPREG_TYPE_IO ?
PCI_MAPREG_TYPE_IO : PCI_MAPREG_MEM_TYPE(bar));
if (type == PCI_MAPREG_TYPE_IO) {
tag = pa->pa_iot;
base = PCI_MAPREG_IO_ADDR(bar);
} else {
tag = pa->pa_memt;
base = PCI_MAPREG_MEM_ADDR(bar);
}
#ifdef PUCCN
if (com_is_console(tag, base, &ioh)) {
sc->sc_bar_mappings[i].mapped = 1;
sc->sc_bar_mappings[i].a = base;
sc->sc_bar_mappings[i].s = COM_NPORTS;
sc->sc_bar_mappings[i].t = tag;
sc->sc_bar_mappings[i].h = ioh;
continue;
}
#endif
sc->sc_bar_mappings[i].mapped = (pci_mapreg_map(pa,
PCI_MAPREG_START + 4 * i, type, 0,
&sc->sc_bar_mappings[i].t, &sc->sc_bar_mappings[i].h,
&sc->sc_bar_mappings[i].a, &sc->sc_bar_mappings[i].s)
== 0);
if (sc->sc_bar_mappings[i].mapped)
continue;
aprint_error_dev(self, "couldn't map BAR at offset 0x%lx\n",
(long)(PCI_MAPREG_START + 4 * i));
}
/* Map interrupt. */
if (pci_intr_map(pa, &intrhandle)) {
aprint_error_dev(self, "couldn't map interrupt\n");
return;
}
/*
* XXX the sub-devices establish the interrupts, for the
* XXX following reasons:
* XXX
* XXX * we can't really know what IPLs they'd want
* XXX
* XXX * the MD dispatching code can ("should") dispatch
* XXX chained interrupts better than we can.
* XXX
* XXX It would be nice if we could indicate to the MD interrupt
* XXX handling code that the interrupt line used by the device
* XXX was a PCI (level triggered) interrupt.
* XXX
* XXX It's not pretty, but hey, what is?
*/
/* Configure each port. */
for (i = 0; PUC_PORT_VALID(sc->sc_desc, i); i++) {
bus_space_handle_t subregion_handle;
/* make sure the base address register is mapped */
barindex = PUC_PORT_BAR_INDEX(sc->sc_desc->ports[i].bar);
if (!sc->sc_bar_mappings[barindex].mapped) {
printf("%s: %s port uses unmapped BAR (0x%x)\n",
device_xname(self),
puc_port_type_name(sc->sc_desc->ports[i].type),
sc->sc_desc->ports[i].bar);
continue;
}
/* set up to configure the child device */
paa.port = i;
paa.type = sc->sc_desc->ports[i].type;
paa.flags = sc->sc_desc->ports[i].flags;
paa.pc = pa->pa_pc;
paa.tag = pa->pa_tag;
paa.intrhandle = intrhandle;
paa.a = sc->sc_bar_mappings[barindex].a;
paa.t = sc->sc_bar_mappings[barindex].t;
paa.dmat = pa->pa_dmat;
paa.dmat64 = pa->pa_dmat64;
if (
#ifdef PUCCN
!com_is_console(sc->sc_bar_mappings[barindex].t,
sc->sc_bar_mappings[barindex].a, &subregion_handle)
&&
#endif
bus_space_subregion(sc->sc_bar_mappings[barindex].t,
sc->sc_bar_mappings[barindex].h,
sc->sc_desc->ports[i].offset,
sc->sc_bar_mappings[barindex].s -
sc->sc_desc->ports[i].offset,
&subregion_handle) != 0) {
aprint_error_dev(self, "couldn't get subregion for port %d\n", i);
continue;
}
paa.h = subregion_handle;
#if 0
printf("%s: port %d: %s @ (index %d) 0x%x (0x%lx, 0x%lx)\n",
device_xname(self), paa.port,
puc_port_type_name(paa.type), barindex, (int)paa.a,
(long)paa.t, (long)paa.h);
#endif
locs[PUCCF_PORT] = i;
/* and configure it */
sc->sc_ports[i].dev = config_found_sm_loc(self, "puc", locs,
&paa, puc_print, config_stdsubmatch);
}
}
