void puc_common_attach(struct puc_softc *sc, struct puc_attach_args *paa) { const struct puc_device_description *desc = sc->sc_desc; int i, bar; /* Configure each port. */ for (i = 0; i < PUC_MAX_PORTS; i++) { if (desc->ports[i].type == 0) /* neither com or lpt */ continue; /* make sure the base address register is mapped */ bar = PUC_PORT_BAR_INDEX(desc->ports[i].bar); if (!sc->sc_bar_mappings[bar].mapped) { printf("%s: %s port uses unmapped BAR (0x%x)\n", sc->sc_dev.dv_xname, puc_port_type_name(desc->ports[i].type), desc->ports[i].bar); continue; } /* set up to configure the child device */ paa->port = i; paa->a = sc->sc_bar_mappings[bar].a; paa->t = sc->sc_bar_mappings[bar].t; paa->type = desc->ports[i].type; if (desc->ports[i].offset >= sc->sc_bar_mappings[bar].s || bus_space_subregion(sc->sc_bar_mappings[bar].t, sc->sc_bar_mappings[bar].h, desc->ports[i].offset, sc->sc_bar_mappings[bar].s - desc->ports[i].offset, &paa->h)) { printf("%s: couldn't get subregion for port %d\n", sc->sc_dev.dv_xname, i); continue; } #if 0 if (autoconf_verbose) printf("%s: port %d: %s @ (index %d) 0x%x " "(0x%lx, 0x%lx)\n", sc->sc_dev.dv_xname, paa->port, puc_port_type_name(paa->type), bar, (int)paa->a, (long)paa->t, (long)paa->h); #endif /* and configure it */ sc->sc_ports[i].dev = config_found_sm(&sc->sc_dev, paa, puc_print, puc_submatch); } }
static void puc_attach(device_t parent, device_t self, void *aux) { struct puc_softc *sc = device_private(self); struct pci_attach_args *pa = aux; struct puc_attach_args paa; pci_intr_handle_t intrhandle; pcireg_t subsys; int i, barindex; bus_addr_t base; bus_space_tag_t tag; #ifdef PUCCN bus_space_handle_t ioh; #endif int locs[PUCCF_NLOCS]; subsys = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG); sc->sc_desc = puc_find_description(PCI_VENDOR(pa->pa_id), PCI_PRODUCT(pa->pa_id), PCI_VENDOR(subsys), PCI_PRODUCT(subsys)); if (sc->sc_desc == NULL) { /* * This was a class/subclass match, so tell people to compile * kernel with options that cause this driver to spew. */ #ifdef PUC_PRINT_REGS printf(":\n"); pci_conf_print(pa->pa_pc, pa->pa_tag, NULL); #else printf(": unknown PCI communications device\n"); printf("%s: compile kernel with PUC_PRINT_REGS and larger\n", device_xname(self)); printf("%s: mesage buffer (via 'options MSGBUFSIZE=...'),\n", device_xname(self)); printf("%s: and report the result with send-pr\n", device_xname(self)); #endif return; } printf(": %s (", sc->sc_desc->name); for (i = 0; PUC_PORT_VALID(sc->sc_desc, i); i++) printf("%s%s", i ? ", " : "", puc_port_type_name(sc->sc_desc->ports[i].type)); printf(")\n"); for (i = 0; i < 6; i++) { pcireg_t bar, type; sc->sc_bar_mappings[i].mapped = 0; bar = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_MAPREG_START + 4 * i); /* XXX const */ if (bar == 0) /* BAR not implemented(?) */ continue; type = (PCI_MAPREG_TYPE(bar) == PCI_MAPREG_TYPE_IO ? PCI_MAPREG_TYPE_IO : PCI_MAPREG_MEM_TYPE(bar)); if (type == PCI_MAPREG_TYPE_IO) { tag = pa->pa_iot; base = PCI_MAPREG_IO_ADDR(bar); } else { tag = pa->pa_memt; base = PCI_MAPREG_MEM_ADDR(bar); } #ifdef PUCCN if (com_is_console(tag, base, &ioh)) { sc->sc_bar_mappings[i].mapped = 1; sc->sc_bar_mappings[i].a = base; sc->sc_bar_mappings[i].s = COM_NPORTS; sc->sc_bar_mappings[i].t = tag; sc->sc_bar_mappings[i].h = ioh; continue; } #endif sc->sc_bar_mappings[i].mapped = (pci_mapreg_map(pa, PCI_MAPREG_START + 4 * i, type, 0, &sc->sc_bar_mappings[i].t, &sc->sc_bar_mappings[i].h, &sc->sc_bar_mappings[i].a, &sc->sc_bar_mappings[i].s) == 0); if (sc->sc_bar_mappings[i].mapped) continue; aprint_error_dev(self, "couldn't map BAR at offset 0x%lx\n", (long)(PCI_MAPREG_START + 4 * i)); } /* Map interrupt. */ if (pci_intr_map(pa, &intrhandle)) { aprint_error_dev(self, "couldn't map interrupt\n"); return; } /* * XXX the sub-devices establish the interrupts, for the * XXX following reasons: * XXX * XXX * we can't really know what IPLs they'd want * XXX * XXX * the MD dispatching code can ("should") dispatch * XXX chained interrupts better than we can. * XXX * XXX It would be nice if we could indicate to the MD interrupt * XXX handling code that the interrupt line used by the device * XXX was a PCI (level triggered) interrupt. * XXX * XXX It's not pretty, but hey, what is? */ /* Configure each port. */ for (i = 0; PUC_PORT_VALID(sc->sc_desc, i); i++) { bus_space_handle_t subregion_handle; /* make sure the base address register is mapped */ barindex = PUC_PORT_BAR_INDEX(sc->sc_desc->ports[i].bar); if (!sc->sc_bar_mappings[barindex].mapped) { printf("%s: %s port uses unmapped BAR (0x%x)\n", device_xname(self), puc_port_type_name(sc->sc_desc->ports[i].type), sc->sc_desc->ports[i].bar); continue; } /* set up to configure the child device */ paa.port = i; paa.type = sc->sc_desc->ports[i].type; paa.flags = sc->sc_desc->ports[i].flags; paa.pc = pa->pa_pc; paa.tag = pa->pa_tag; paa.intrhandle = intrhandle; paa.a = sc->sc_bar_mappings[barindex].a; paa.t = sc->sc_bar_mappings[barindex].t; paa.dmat = pa->pa_dmat; paa.dmat64 = pa->pa_dmat64; if ( #ifdef PUCCN !com_is_console(sc->sc_bar_mappings[barindex].t, sc->sc_bar_mappings[barindex].a, &subregion_handle) && #endif bus_space_subregion(sc->sc_bar_mappings[barindex].t, sc->sc_bar_mappings[barindex].h, sc->sc_desc->ports[i].offset, sc->sc_bar_mappings[barindex].s - sc->sc_desc->ports[i].offset, &subregion_handle) != 0) { aprint_error_dev(self, "couldn't get subregion for port %d\n", i); continue; } paa.h = subregion_handle; #if 0 printf("%s: port %d: %s @ (index %d) 0x%x (0x%lx, 0x%lx)\n", device_xname(self), paa.port, puc_port_type_name(paa.type), barindex, (int)paa.a, (long)paa.t, (long)paa.h); #endif locs[PUCCF_PORT] = i; /* and configure it */ sc->sc_ports[i].dev = config_found_sm_loc(self, "puc", locs, &paa, puc_print, config_stdsubmatch); } }