/*************************************************************************************************
* 功能：线程/ISR尝试向消息队列中发送消息 *
* 参数：(1) pMsgQue 消息队列的地址 *
* (2) pMsg2 保存消息结构地址的指针变量 *
* (3) type 消息类型 *
* (4) pHiRP 是否需要线程调度标记 *
* (5) pError 详细调用结果 *
* 返回: (1) eFailure 操作失败 *
* (2) eSuccess 操作成功 *
* 说明： *
*************************************************************************************************/
static TState SendMessage(TMsgQueue* pMsgQue, void** pMsg2, TMsgType type, TBool* pHiRP,
TError* pError)
{
TState state = eSuccess;
TError error = IPC_ERR_NONE;
TIpcContext* pContext = (TIpcContext*)0;
/* 检查消息队列状态，如果消息队列满则返回失败 */
if (pMsgQue->Status == eMQFull)
{
error = IPC_ERR_INVALID_STATUS;
state = eFailure;
}
else if (pMsgQue->Status == eMQEmpty)
{
/* 尝试唤醒写阻塞队列中的一个线程 */
if (pMsgQue->Property & IPC_PROP_PRIMQ_AVAIL)
{
pContext = (TIpcContext*)(pMsgQue->Queue.PrimaryHandle->Owner);
}
/* 在消息队列为空的情况下，如果队列中有线程等待，则说明是读阻塞队列，
保持消息队列状态不变 */
if (pContext != (TIpcContext*)0)
{
uIpcUnblockThread(pContext, eSuccess, IPC_ERR_NONE, pHiRP);
/* 将消息发送给该线程 */
*(pContext->Data.Addr2) = *pMsg2;
}
else
{
/* 将线程发送的消息写入消息队列 */
SaveMessage(pMsgQue, pMsg2, type);
pMsgQue->Status = (pMsgQue->Tail == pMsgQue->Head) ? eMQFull : eMQPartial;
}
}
else
/* if (mq->Status == eMQPartial) */
{
/* 将线程发送的消息写入消息队列 */
SaveMessage(pMsgQue, pMsg2, type);
/* 消息队列空的情况，如果是消息队列的容量是1，那么它的状态从空直接到 eMQFull，
否则消息队列进入 eMQPartial 状态 */
/* 消息队列普通的情况，消息对列写操作可能导致消息队列进入 eMQFull
状态或者保持 eMQPartial 状态 */
pMsgQue->Status = (pMsgQue->Tail == pMsgQue->Head) ? eMQFull : eMQPartial;
}
*pError = error;
return state;
}
//保存信息
VOID CSkinRichEdit::OnSaveString()
{
//保存信息
SaveMessage(NULL);
return;
}
// check and see if the message needs saving, and whether to ditch it or not
bool AwayEditorWindow::CheckMessage() {
if( !hasSelection )
return true;
BAlert* alert;
if( isDirty || genView->textview->IsDirty() ) {
alert = new BAlert("", Language.get("AME_SAVE_CHANGES"), Language.get("CANCEL_LABEL"),
Language.get("IGNORE_LABEL"), Language.get("SAVE_LABEL"),
B_WIDTH_AS_USUAL, B_OFFSET_SPACING, B_WARNING_ALERT);
alert->SetShortcut( 0, B_ESCAPE );
int32 index = alert->Go();
if( index == 2 )
if( SaveMessage() )
return true;
else return false;
if( index == 1 ) {
if( currentMsg == BString(Language.get("AME_NEW_MESSAGE")) )
DeleteMessage();
}
if( index == 0 ) {
Revert();
return false;
}
}
return true;
}
void AwayEditorWindow::MessageReceived(BMessage* message)
{
switch(message->what)
{
case AWAY_NEW:
NewMessage();
break;
case AWAY_SAVE:
SaveMessage();
break;
case AWAY_DELETE:
DeleteMessage();
break;
case AWAY_CHANGED:
isDirty = true;
break;
case BEAIM_RELOAD_PREF_SETTINGS:
enterIsNewline = prefs->ReadBool( "EnterInsertsNewline", false );
tabIsTab = prefs->ReadBool( "TabIsTab", false );
break;
case AWAY_SELECTED: {
AwayItem* item = (AwayItem*)genView->listview->ItemAt( genView->listview->CurrentSelection() );
if( !item || !CheckMessage() ) {
EnableMessageStuff(false);
return;
}
LoadMessage( item->GetName() );
break;
}
case BEAIM_REFRESH_LANG_STRINGS:
RefreshLangStrings();
break;
default:
BWindow::MessageReceived(message);
}
}
/* 处理消息队列读数据的情况
(1) 处理消息队列为满的情况：如果是容量是1的消息队列，读取操作会导致消息队列状态从满直接到空，
否则消息队列进入 eMQPartial 状态
(2) 处理消息队列普通的情况：如果消息队列中只有1个消息，对列读取操作可能导致消息队列进入空状态
否则消息队列保持 eMQPartial 状态
(3) 无论是消息队列满还是消息队列普通状态：最终状态只有普通和空。
*/
static TState ReceiveMessage(TMsgQueue* pMsgQue, void** pMsg2, TBool* pHiRP, TError* pError)
{
TState state = eSuccess;
TError error = IPC_ERR_NONE;
TMsgType type;
TIpcContext* pContext = (TIpcContext*)0;
/* 检查消息队列状态 */
if (pMsgQue->Status == eMQEmpty)
{
error = IPC_ERR_INVALID_STATUS;
state = eFailure;
}
else if (pMsgQue->Status == eMQFull)
{
/* 从消息队列中读取一个消息给当前线程 */
ConsumeMessage(pMsgQue, pMsg2);
/*
* 在消息队列满并且有线程阻塞在写队列中的情况下，
* 需要将合适的线程接触阻塞并且将该线程携带的消息写入队列，
* 所以保持消息队列状态不变
*/
if (pMsgQue->Property & IPC_PROP_AUXIQ_AVAIL)
{
pContext = (TIpcContext*)(pMsgQue->Queue.AuxiliaryHandle->Owner);
}
else
{
if (pMsgQue->Property & IPC_PROP_PRIMQ_AVAIL)
{
pContext = (TIpcContext*)(pMsgQue->Queue.PrimaryHandle->Owner);
}
}
if (pContext != (TIpcContext*)0)
{
uIpcUnblockThread(pContext, eSuccess, IPC_ERR_NONE, pHiRP);
/* 根据线程所处的分队列判断消息类型 */
type = ((pContext->Option) & IPC_OPT_UARGENT) ? eUrgentMessage : eNormalMessage;
/* 并且将该线程发送的消息写入消息队列 */
SaveMessage(pMsgQue, pContext->Data.Addr2, type);
}
else
{
pMsgQue->Status = (pMsgQue->Tail == pMsgQue->Head) ? eMQEmpty : eMQPartial;
}
}
else
/* if (mq->Status == eMQPartial) */
{
/* 从消息队列中读取一个消息给当前线程 */
ConsumeMessage(pMsgQue, pMsg2);
pMsgQue->Status = (pMsgQue->Tail == pMsgQue->Head) ? eMQEmpty : eMQPartial;
}
*pError = error;
return state;
}
