void USB_Host_PrepareForDeviceConnect(void)
{
USB_Host_VBUS_Auto_Off();
USB_OTGPAD_Off();
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
USB_HostState = HOST_STATE_Unattached;
}
static void USB_Init_Host(void)
{
USB_HostState = HOST_STATE_Unattached;
USB_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
USB_Host_HostMode_On();
USB_Host_VBUS_Auto_On();
USB_INT_Enable(USB_INT_DCONNI);
USB_INT_Enable(USB_INT_BCERRI);
USB_Attach();
}
static void USB_Init_Device(void)
{
USB_DeviceState = DEVICE_STATE_Unattached;
USB_Device_ConfigurationNumber = 0;
#if !defined(NO_DEVICE_REMOTE_WAKEUP)
USB_Device_RemoteWakeupEnabled = false;
#endif
#if !defined(NO_DEVICE_SELF_POWER)
USB_Device_CurrentlySelfPowered = false;
#endif
#if !defined(FIXED_CONTROL_ENDPOINT_SIZE)
USB_Descriptor_Device_t* DeviceDescriptorPtr;
if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
#endif
if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
{
USB_Device_SetLowSpeed();
}
else
{
#if defined(USB_DEVICE_OPT_HIGHSPEED)
if (USB_Options & USB_DEVICE_OPT_HIGHSPEED)
USB_Device_SetHighSpeed();
else
USB_Device_SetFullSpeed();
#else
USB_Device_SetFullSpeed();
#endif
}
USB_INT_Enable(USB_INT_VBUSTI);
Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize,
ENDPOINT_BANK_SINGLE);
USB_INT_Clear(USB_INT_SUSPI);
USB_INT_Enable(USB_INT_SUSPI);
USB_INT_Enable(USB_INT_EORSTI);
USB_Attach();
}
void USB_Host_ResetDevice(void)
{
bool BusSuspended = USB_Host_IsBusSuspended();
USB_INT_Disable(USB_INT_DDISCI);
USB_Host_WaitMS(20);
USB_Host_ResetBus();
while (!(USB_Host_IsResetBusDone()));
USB_INT_Clear(USB_INT_HSOFI);
USB_Host_ResumeBus();
for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
{
/* Workaround for powerless-pullup devices. After a USB bus reset,
all disconnection interrupts are supressed while a USB frame is
looked for - if it is found within 10ms, the device is still
present. */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_DDISCI);
break;
}
_delay_ms(1);
}
if (BusSuspended)
USB_Host_SuspendBus();
USB_INT_Enable(USB_INT_DDISCI);
}
void USB_ResetInterface(void)
{
#if defined(USB_CAN_BE_BOTH)
bool UIDModeSelectEnabled = ((UHWCON & (1 << UIDE)) != 0);
#endif
USB_INT_DisableAllInterrupts();
USB_INT_ClearAllInterrupts();
USB_Controller_Reset();
#if defined(USB_CAN_BE_BOTH)
if (UIDModeSelectEnabled)
USB_INT_Enable(USB_INT_IDTI);
#endif
USB_CLK_Unfreeze();
if (USB_CurrentMode == USB_MODE_Device)
{
#if defined(USB_CAN_BE_DEVICE)
#if (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
UHWCON |= (1 << UIMOD);
#endif
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
#if defined(USB_SERIES_2_AVR)
USB_PLL_On();
while (!(USB_PLL_IsReady()));
#else
USB_PLL_Off();
#endif
}
USB_Init_Device();
#endif
}
else if (USB_CurrentMode == USB_MODE_Host)
{
#if defined(USB_CAN_BE_HOST)
UHWCON &= ~(1 << UIMOD);
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
#if defined(USB_CAN_BE_HOST)
USB_PLL_On();
while (!(USB_PLL_IsReady()));
#endif
}
USB_Init_Host();
#endif
}
#if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
USB_OTGPAD_On();
#endif
}
static void USB_Init_Host(void)
{
USB_HostState = HOST_STATE_Unattached;
USB_Host_ConfigurationNumber = 0;
USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
USB_Host_HostMode_On();
USB_Host_VBUS_Auto_Off();
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
USB_Attach();
}
void USB_Init(
#if defined(USB_CAN_BE_BOTH)
const uint8_t Mode
#endif
#if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
,
#elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
void
#endif
#if !defined(USE_STATIC_OPTIONS)
const uint8_t Options
#endif
)
{
#if !defined(USE_STATIC_OPTIONS)
USB_Options = Options;
#endif
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
/* Workaround for AVR8 bootloaders that fail to turn off the OTG pad before running
* the loaded application. This causes VBUS detection to fail unless we first force
* it off to reset it. */
USB_OTGPAD_Off();
#endif
if (!(USB_Options & USB_OPT_REG_DISABLED))
USB_REG_On();
else
USB_REG_Off();
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
#if defined(USB_SERIES_4_AVR)
PLLFRQ = (1 << PDIV2);
#endif
}
#if defined(USB_CAN_BE_BOTH)
if (Mode == USB_MODE_UID)
{
UHWCON |= (1 << UIDE);
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
else
{
UHWCON &= ~(1 << UIDE);
USB_CurrentMode = Mode;
}
#endif
USB_IsInitialized = true;
USB_ResetInterface();
}
static void USB_Init_Device(void)
{
USB_DeviceState = DEVICE_STATE_Unattached;
USB_Device_ConfigurationNumber = 0;
#if !defined(NO_DEVICE_REMOTE_WAKEUP)
USB_Device_RemoteWakeupEnabled = false;
#endif
#if !defined(NO_DEVICE_SELF_POWER)
USB_Device_CurrentlySelfPowered = false;
#endif
#if !defined(FIXED_CONTROL_ENDPOINT_SIZE)
USB_Descriptor_Device_t* DeviceDescriptorPtr;
#if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \
!(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
uint8_t DescriptorAddressSpace;
if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr, &DescriptorAddressSpace) != NO_DESCRIPTOR)
{
if (DescriptorAddressSpace == MEMSPACE_FLASH)
USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
else if (DescriptorAddressSpace == MEMSPACE_EEPROM)
USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
else
USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
}
#else
if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
{
#if defined(USE_RAM_DESCRIPTORS)
USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
#elif defined(USE_EEPROM_DESCRIPTORS)
USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
#else
USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
#endif
}
#endif
#endif
if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
USB_Device_SetLowSpeed();
else
USB_Device_SetFullSpeed();
Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize,
ENDPOINT_BANK_SINGLE);
USB_INT_Enable(USB_INT_BUSEVENTI);
USB_Attach();
}
/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
* routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
* with compatible devices.
*
* This routine searches for a HID interface descriptor containing at least one Interrupt type IN endpoint.
*
* \return An error code from the MouseHostViaInt_GetConfigDescriptorDataCodes_t enum.
*/
uint8_t ProcessConfigurationDescriptor(void)
{
uint8_t* ConfigDescriptorData;
uint16_t ConfigDescriptorSize;
/* Get Configuration Descriptor size from the device */
if (USB_Host_GetDeviceConfigDescriptor(&ConfigDescriptorSize, NULL) != HOST_SENDCONTROL_Successful)
return ControlError;
/* Ensure that the Configuration Descriptor isn't too large */
if (ConfigDescriptorSize > MAX_CONFIG_DESCRIPTOR_SIZE)
return DescriptorTooLarge;
/* Allocate enough memory for the entire config descriptor */
ConfigDescriptorData = alloca(ConfigDescriptorSize);
/* Retrieve the entire configuration descriptor into the allocated buffer */
USB_Host_GetDeviceConfigDescriptor(&ConfigDescriptorSize, ConfigDescriptorData);
/* Validate returned data - ensure first entry is a configuration header descriptor */
if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
return InvalidConfigDataReturned;
/* Get the mouse interface from the configuration descriptor */
if (USB_Host_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData, NextMouseInterface))
{
/* Descriptor not found, error out */
return NoHIDInterfaceFound;
}
/* Get the mouse interface's data endpoint descriptor */
if (USB_Host_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
NextInterfaceMouseDataEndpoint))
{
/* Descriptor not found, error out */
return NoEndpointFound;
}
/* Retrieve the endpoint address from the endpoint descriptor */
USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
/* Configure the mouse data pipe */
Pipe_ConfigurePipe(MOUSE_DATAPIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
EndpointData->EndpointAddress, EndpointData->EndpointSize, PIPE_BANK_SINGLE);
Pipe_SetInfiniteINRequests();
Pipe_SetInterruptPeriod(EndpointData->PollingIntervalMS);
Pipe_Unfreeze();
/* Enable the pipe IN interrupt for the data pipe */
USB_INT_Enable(PIPE_INT_IN);
/* Valid data found, return success */
return SuccessfulConfigRead;
}
ISR(USB_COM_vect, ISR_BLOCK)
{
uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();
USB_INT_Disable(USB_INT_RXSTPI);
sei();
USB_USBTask();
USB_INT_Enable(USB_INT_RXSTPI);
USB_INT_Clear(USB_INT_RXSTPI);
Endpoint_SelectEndpoint(PrevSelectedEndpoint);
}
void USB_Init(
#if defined(USB_CAN_BE_BOTH)
const uint8_t Mode
#endif
#if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
,
#elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
void
#endif
#if !defined(USE_STATIC_OPTIONS)
const uint8_t Options
#endif
)
{
#if !defined(USE_STATIC_OPTIONS)
USB_Options = Options;
#endif
if (!(USB_Options & USB_OPT_REG_DISABLED))
USB_REG_On();
else
USB_REG_Off();
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
#if defined(USB_SERIES_4_AVR)
PLLFRQ = ((1 << PLLUSB) | (1 << PDIV3) | (1 << PDIV1));
#endif
}
#if defined(USB_CAN_BE_BOTH)
if (Mode == USB_MODE_UID)
{
UHWCON |= (1 << UIDE);
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
else
{
UHWCON &= ~(1 << UIDE);
USB_CurrentMode = Mode;
}
#endif
USB_IsInitialized = true;
USB_ResetInterface();
}
ISR(USB_COM_vect, ISR_BLOCK)
{
uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();
Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
USB_INT_Disable(USB_INT_RXSTPI);
GlobalInterruptEnable();
USB_Device_ProcessControlRequest();
Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
USB_INT_Enable(USB_INT_RXSTPI);
Endpoint_SelectEndpoint(PrevSelectedEndpoint);
}
ISR(USB_COM_vect, ISR_BLOCK)
{
uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();
Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
USB_INT_Disable(USB_INT_RXSTPI);
NONATOMIC_BLOCK(NONATOMIC_FORCEOFF)
{
USB_Device_ProcessControlRequest();
}
Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
USB_INT_Enable(USB_INT_RXSTPI);
Endpoint_SelectEndpoint(PrevSelectedEndpoint);
}
void USB_ResetInterface(void)
{
#if defined(USB_CAN_BE_BOTH)
bool UIDModeSelectEnabled = AVR32_USBB.USBCON.uide;
#endif
AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].pllsel = !(USB_Options & USB_OPT_GCLK_SRC_OSC);
AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].oscsel = !(USB_Options & USB_OPT_GCLK_CHANNEL_0);
AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].diven = (F_USB != USB_CLOCK_REQUIRED_FREQ);
AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].div = (F_USB == USB_CLOCK_REQUIRED_FREQ) ? 0 : (uint32_t)(((F_USB / USB_CLOCK_REQUIRED_FREQ) - 1) / 2);
AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].cen = true;
USB_INT_DisableAllInterrupts();
USB_INT_ClearAllInterrupts();
USB_Controller_Reset();
#if defined(USB_CAN_BE_BOTH)
if (UIDModeSelectEnabled)
USB_INT_Enable(USB_INT_IDTI);
#endif
USB_CLK_Unfreeze();
if (USB_CurrentMode == USB_MODE_Device)
{
#if defined(USB_CAN_BE_DEVICE)
AVR32_USBB.USBCON.uimod = true;
USB_Init_Device();
#endif
}
else if (USB_CurrentMode == USB_MODE_Host)
{
#if defined(INVERTED_VBUS_ENABLE_LINE)
AVR32_USBB.USBCON.vbuspol = true;
#endif
#if defined(USB_CAN_BE_HOST)
AVR32_USBB.USBCON.uimod = false;
USB_Init_Host();
#endif
}
USB_OTGPAD_On();
}
ISR(USB_GEN_vect, ISR_BLOCK)
{
// Get interrupt source and clear it
uint8_t UDINT_mirror = UDINT;
USB_INT_ClearAllInterrupts();
// Reset Interrupt
if (UDINT_mirror & (1 << EORSTI))
{
USB_Device_ConfigurationNumber = 0;
Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
FIXED_CONTROL_ENDPOINT_SIZE, 1);
#if defined(INTERRUPT_CONTROL_ENDPOINT)
USB_INT_Enable(USB_INT_RXSTPI);
#endif
}
}
void USB_Init(
#if defined(USB_CAN_BE_BOTH)
const uint8_t Mode
#endif
#if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
,
#elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
void
#endif
#if !defined(USE_STATIC_OPTIONS)
const uint8_t Options
#endif
)
{
#if !defined(USE_STATIC_OPTIONS)
USB_Options = Options;
#endif
#if defined(USB_CAN_BE_BOTH)
if (Mode == USB_MODE_UID)
{
AVR32_USBB.USBCON.uide = true;
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
else
{
AVR32_USBB.USBCON.uide = false;
USB_CurrentMode = Mode;
}
#else
AVR32_USBB.USBCON.uide = false;
#endif
USB_IsInitialized = true;
USB_ResetInterface();
}
void USB_Init(
#if defined(USB_CAN_BE_BOTH)
const uint8_t Mode
#endif
#if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
,
#elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
void
#endif
#if !defined(USE_STATIC_OPTIONS)
const uint8_t Options
#endif
)
{
#if defined(USB_CAN_BE_BOTH)
USB_CurrentMode = Mode;
#endif
#if !defined(USE_STATIC_OPTIONS)
USB_Options = Options;
#endif
#if defined(USB_CAN_BE_HOST)
USB_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
#endif
#if defined(USB_DEVICE_ONLY) && (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
UHWCON |= (1 << UIMOD);
#elif defined(USB_HOST_ONLY)
UHWCON &= ~(1 << UIMOD);
#elif defined(USB_CAN_BE_BOTH)
if (Mode == USB_MODE_UID)
{
UHWCON |= (1 << UIDE);
USB_INT_Clear(USB_INT_IDTI);
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
else if (Mode == USB_MODE_DEVICE)
{
UHWCON |= (1 << UIMOD);
}
else if (Mode == USB_MODE_HOST)
{
UHWCON &= ~(1 << UIMOD);
}
else
{
EVENT_USB_InitFailure(USB_INITERROR_NoUSBModeSpecified);
return;
}
#endif
USB_ResetInterface();
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
USB_OTGPAD_On();
#endif
USB_IsInitialized = true;
sei();
}
void USB_SetupInterface(void)
{
USB_INT_DisableAllInterrupts();
USB_INT_ClearAllInterrupts();
USB_IsConnected = false;
#if defined(USB_CAN_BE_BOTH)
USB_IsInitialized = false;
#endif
#if defined(USB_CAN_BE_HOST)
USB_HostState = HOST_STATE_Unattached;
#endif
#if defined(USB_CAN_BE_DEVICE)
USB_ConfigurationNumber = 0;
USB_RemoteWakeupEnabled = false;
USB_CurrentlySelfPowered = false;
#endif
#if defined(USB_MODIFIED_FULL_CONTROLLER) && !defined(MANUAL_PLL_CONTROL)
PLLFRQ = ((1 << PLLUSB) | (1 << PDIV3) | (1 << PDIV1));
#endif
#if !defined(MANUAL_PLL_CONTROL)
USB_PLL_On();
#endif
while (!(USB_PLL_IsReady()));
USB_Interface_Reset();
#if defined(USB_CAN_BE_BOTH)
if (UHWCON & (1 << UIDE))
{
USB_INT_Clear(USB_INT_IDTI);
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
#elif defined(USB_DEVICE_ONLY)
#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
USB_INT_Enable(USB_INT_VBUS);
#endif
#endif
if (!(USB_Options & USB_OPT_REG_DISABLED))
USB_REG_On();
USB_CLK_Unfreeze();
#if (defined(USB_CAN_BE_DEVICE) && (defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)))
if (USB_CurrentMode == USB_MODE_DEVICE)
{
#ifdef CUL_V3
USB_Device_SetHighSpeed();
#else
if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
USB_Device_SetLowSpeed();
else
USB_Device_SetHighSpeed();
#endif
USB_INT_Enable(USB_INT_VBUS);
}
#endif
#if defined(USB_CAN_BE_HOST)
USB_INT_Enable(USB_INT_VBERRI);
if (USB_CurrentMode == USB_MODE_HOST)
USB_Host_PrepareForDeviceConnect();
#endif
#if defined(USB_CAN_BE_DEVICE)
USB_Descriptor_Device_t* DeviceDescriptorPtr;
uint16_t DeviceDescriptorSize;
if (USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr, &DeviceDescriptorSize) == true)
{
#if defined(USE_RAM_DESCRIPTORS)
USB_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
#elif defined(USE_EEPROM_DESCRIPTORS)
USB_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
#else
USB_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
#endif
}
#endif
USB_Attach();
#if defined(USB_DEVICE_ONLY)
USB_INT_Enable(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_EORSTI);
#elif defined(USB_HOST_ONLY)
USB_Host_HostMode_On();
#else
if (USB_CurrentMode == USB_MODE_DEVICE)
{
USB_INT_Enable(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_EORSTI);
}
else if (USB_CurrentMode == USB_MODE_HOST)
{
USB_Host_HostMode_On();
}
#endif
#if defined(USB_CAN_BE_BOTH)
USB_InitTaskPointer();
#endif
}
ISR(USB_GEN_vect, ISR_BLOCK)
{
#if defined(USB_CAN_BE_DEVICE)
#if !defined(NO_SOF_EVENTS)
if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI))
{
USB_INT_Clear(USB_INT_SOFI);
EVENT_USB_Device_StartOfFrame();
}
#endif
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
if (USB_INT_HasOccurred(USB_INT_VBUSTI) && USB_INT_IsEnabled(USB_INT_VBUSTI))
{
USB_INT_Clear(USB_INT_VBUSTI);
if (USB_VBUS_GetStatus())
{
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
USB_PLL_On();
while (!(USB_PLL_IsReady()));
}
USB_DeviceState = DEVICE_STATE_Powered;
EVENT_USB_Device_Connect();
}
else
{
if (!(USB_Options & USB_OPT_MANUAL_PLL))
USB_PLL_Off();
USB_DeviceState = DEVICE_STATE_Unattached;
EVENT_USB_Device_Disconnect();
}
}
#endif
if (USB_INT_HasOccurred(USB_INT_SUSPI) && USB_INT_IsEnabled(USB_INT_SUSPI))
{
USB_INT_Disable(USB_INT_SUSPI);
USB_INT_Enable(USB_INT_WAKEUPI);
USB_CLK_Freeze();
if (!(USB_Options & USB_OPT_MANUAL_PLL))
USB_PLL_Off();
#if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
USB_DeviceState = DEVICE_STATE_Unattached;
EVENT_USB_Device_Disconnect();
#else
USB_DeviceState = DEVICE_STATE_Suspended;
EVENT_USB_Device_Suspend();
#endif
}
if (USB_INT_HasOccurred(USB_INT_WAKEUPI) && USB_INT_IsEnabled(USB_INT_WAKEUPI))
{
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
USB_PLL_On();
while (!(USB_PLL_IsReady()));
}
USB_CLK_Unfreeze();
USB_INT_Clear(USB_INT_WAKEUPI);
USB_INT_Disable(USB_INT_WAKEUPI);
USB_INT_Enable(USB_INT_SUSPI);
if (USB_Device_ConfigurationNumber)
USB_DeviceState = DEVICE_STATE_Configured;
else
USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered;
#if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
EVENT_USB_Device_Connect();
#else
EVENT_USB_Device_WakeUp();
#endif
}
if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI))
{
USB_INT_Clear(USB_INT_EORSTI);
USB_DeviceState = DEVICE_STATE_Default;
USB_Device_ConfigurationNumber = 0;
USB_INT_Clear(USB_INT_SUSPI);
USB_INT_Disable(USB_INT_SUSPI);
USB_INT_Enable(USB_INT_WAKEUPI);
Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize,
ENDPOINT_BANK_SINGLE);
#if defined(INTERRUPT_CONTROL_ENDPOINT)
USB_INT_Enable(USB_INT_RXSTPI);
#endif
EVENT_USB_Device_Reset();
}
#endif
#if defined(USB_CAN_BE_HOST)
#if !defined(NO_SOF_EVENTS)
if (USB_INT_HasOccurred(USB_INT_HSOFI) && USB_INT_IsEnabled(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
EVENT_USB_Host_StartOfFrame();
}
#endif
if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI))
{
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Disable(USB_INT_DDISCI);
EVENT_USB_Host_DeviceUnattached();
USB_ResetInterface();
}
if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI))
{
USB_INT_Clear(USB_INT_VBERRI);
USB_Host_VBUS_Manual_Off();
USB_Host_VBUS_Auto_Off();
EVENT_USB_Host_HostError(HOST_ERROR_VBusVoltageDip);
EVENT_USB_Host_DeviceUnattached();
USB_HostState = HOST_STATE_Unattached;
}
if (USB_INT_HasOccurred(USB_INT_SRPI) && USB_INT_IsEnabled(USB_INT_SRPI))
{
USB_INT_Clear(USB_INT_SRPI);
USB_INT_Disable(USB_INT_SRPI);
EVENT_USB_Host_DeviceAttached();
USB_INT_Enable(USB_INT_DDISCI);
USB_HostState = HOST_STATE_Powered;
}
if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI))
{
USB_INT_Clear(USB_INT_BCERRI);
EVENT_USB_Host_DeviceEnumerationFailed(HOST_ENUMERROR_NoDeviceDetected, 0);
EVENT_USB_Host_DeviceUnattached();
USB_ResetInterface();
}
#endif
#if defined(USB_CAN_BE_BOTH)
if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI))
{
USB_INT_Clear(USB_INT_IDTI);
if (USB_DeviceState != DEVICE_STATE_Unattached)
EVENT_USB_Device_Disconnect();
if (USB_HostState != HOST_STATE_Unattached)
EVENT_USB_Host_DeviceUnattached();
USB_CurrentMode = USB_GetUSBModeFromUID();
USB_ResetInterface();
EVENT_USB_UIDChange();
}
#endif
}
void USB_Init(
#if defined(USB_CAN_BE_BOTH)
const uint8_t Mode
#endif
#if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
,
#elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
void
#endif
#if !defined(USE_STATIC_OPTIONS)
const uint8_t Options
#endif
)
{
if (USB_IsInitialized)
USB_ShutDown();
#if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY))
USB_CurrentMode = Mode;
#endif
#if defined(USB_DEVICE_ONLY)
#if defined(USB_FULL_CONTROLLER)
UHWCON |= (1 << UIMOD);
#endif
#elif defined(USB_HOST_ONLY)
UHWCON &= ~(1 << UIMOD);
#else
if (Mode == USB_MODE_NONE)
{
RAISE_EVENT(USB_PowerOnFail, POWERON_ERROR_NoUSBModeSpecified);
return;
}
else if (Mode == USB_MODE_UID)
{
UHWCON |= (1 << UIDE);
USB_INT_Clear(USB_INT_IDTI);
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
else if (Mode == USB_MODE_DEVICE)
{
UHWCON |= (1 << UIMOD);
}
else if (Mode == USB_MODE_HOST)
{
UHWCON &= ~(1 << UIMOD);
}
#endif
#if defined(USB_CAN_BE_BOTH)
USB_InitTaskPointer();
#else
USB_IsInitialized = true;
#endif
#if defined(USB_CAN_BE_HOST)
USB_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
#endif
#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
USB_OTGPAD_On();
#endif
#if !defined(USE_STATIC_OPTIONS)
USB_Options = Options;
#endif
#if defined(USB_DEVICE_ONLY)
#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
USB_INT_Enable(USB_INT_VBUS);
#else
USB_SetupInterface();
#endif
#elif defined(USB_HOST_ONLY)
USB_SetupInterface();
#else
if (USB_CurrentMode == USB_MODE_DEVICE)
USB_INT_Enable(USB_INT_VBUS);
else
USB_SetupInterface();
#endif
sei();
}
ISR(USB_GEN_vect, ISR_BLOCK)
{
#if defined(USB_CAN_BE_DEVICE)
#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)
if (USB_INT_HasOccurred(USB_INT_VBUS) && USB_INT_IsEnabled(USB_INT_VBUS))
{
USB_INT_Clear(USB_INT_VBUS);
RAISE_EVENT(USB_VBUSChange);
if (USB_VBUS_GetStatus())
{
RAISE_EVENT(USB_VBUSConnect);
if (USB_IsConnected)
RAISE_EVENT(USB_Disconnect);
USB_ResetInterface();
USB_IsConnected = true;
RAISE_EVENT(USB_Connect);
}
else
{
RAISE_EVENT(USB_Disconnect);
USB_Detach();
USB_CLK_Freeze();
USB_PLL_Off();
USB_REG_Off();
USB_IsConnected = false;
RAISE_EVENT(USB_VBUSDisconnect);
USB_INT_Clear(USB_INT_VBUS);
}
}
#endif
if (USB_INT_HasOccurred(USB_INT_SUSPEND) && USB_INT_IsEnabled(USB_INT_SUSPEND))
{
USB_INT_Clear(USB_INT_SUSPEND);
USB_INT_Disable(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_WAKEUP);
USB_CLK_Freeze();
if (!(USB_Options & USB_OPT_MANUAL_PLL))
USB_PLL_Off();
USB_IsSuspended = true;
RAISE_EVENT(USB_Suspend);
#if defined(USB_LIMITED_CONTROLLER) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
if (USB_IsConnected)
{
USB_IsConnected = false;
RAISE_EVENT(USB_Disconnect);
}
#endif
}
if (USB_INT_HasOccurred(USB_INT_WAKEUP) && USB_INT_IsEnabled(USB_INT_WAKEUP))
{
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
USB_PLL_On();
while (!(USB_PLL_IsReady()));
}
USB_CLK_Unfreeze();
USB_INT_Clear(USB_INT_WAKEUP);
USB_INT_Disable(USB_INT_WAKEUP);
USB_INT_Enable(USB_INT_SUSPEND);
#if defined(USB_LIMITED_CONTROLLER) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
if (!(USB_IsConnected))
{
USB_IsConnected = true;
RAISE_EVENT(USB_Connect);
}
#endif
USB_IsSuspended = false;
RAISE_EVENT(USB_WakeUp);
}
if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI))
{
USB_INT_Clear(USB_INT_EORSTI);
USB_ConfigurationNumber = 0;
USB_INT_Clear(USB_INT_SUSPEND);
USB_INT_Disable(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_WAKEUP);
Endpoint_ClearEndpoints();
Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
ENDPOINT_DIR_OUT, USB_ControlEndpointSize,
ENDPOINT_BANK_SINGLE);
RAISE_EVENT(USB_Reset);
}
#endif
#if defined(USB_CAN_BE_HOST)
if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI))
{
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Disable(USB_INT_DDISCI);
RAISE_EVENT(USB_DeviceUnattached);
RAISE_EVENT(USB_Disconnect);
USB_ResetInterface();
}
if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI))
{
USB_INT_Clear(USB_INT_VBERRI);
USB_Host_VBUS_Manual_Off();
USB_Host_VBUS_Auto_Off();
RAISE_EVENT(USB_HostError, HOST_ERROR_VBusVoltageDip);
RAISE_EVENT(USB_DeviceUnattached);
USB_HostState = HOST_STATE_Unattached;
}
if (USB_INT_HasOccurred(USB_INT_SRPI) && USB_INT_IsEnabled(USB_INT_SRPI))
{
USB_INT_Clear(USB_INT_SRPI);
USB_INT_Disable(USB_INT_SRPI);
RAISE_EVENT(USB_DeviceAttached);
USB_INT_Enable(USB_INT_DDISCI);
USB_HostState = HOST_STATE_Attached;
}
if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI))
{
USB_INT_Clear(USB_INT_BCERRI);
RAISE_EVENT(USB_DeviceEnumerationFailed, HOST_ENUMERROR_NoDeviceDetected, 0);
RAISE_EVENT(USB_DeviceUnattached);
if (USB_IsConnected)
RAISE_EVENT(USB_Disconnect);
USB_ResetInterface();
}
#endif
#if defined(USB_CAN_BE_BOTH)
if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI))
{
USB_INT_Clear(USB_INT_IDTI);
if (USB_IsConnected)
{
if (USB_CurrentMode == USB_MODE_HOST)
RAISE_EVENT(USB_DeviceUnattached);
else
RAISE_EVENT(USB_Disconnect);
}
RAISE_EVENT(USB_UIDChange);
USB_ResetInterface();
}
#endif
}
void USB_Host_ProcessNextHostState(void)
{
uint8_t ErrorCode = HOST_ENUMERROR_NoError;
uint8_t SubErrorCode = HOST_ENUMERROR_NoError;
static uint16_t WaitMSRemaining;
static uint8_t PostWaitState;
switch (USB_HostState)
{
case HOST_STATE_WaitForDevice:
if (WaitMSRemaining)
{
if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
{
USB_HostState = PostWaitState;
ErrorCode = HOST_ENUMERROR_WaitStage;
break;
}
if (!(--WaitMSRemaining))
USB_HostState = PostWaitState;
}
break;
case HOST_STATE_Powered:
WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS;
USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle;
break;
case HOST_STATE_Powered_WaitForDeviceSettle:
if (WaitMSRemaining--)
{
_delay_ms(1);
break;
}
else
{
USB_Host_VBUS_Manual_Off();
USB_OTGPAD_On();
USB_Host_VBUS_Auto_Enable();
USB_Host_VBUS_Auto_On();
USB_HostState = HOST_STATE_Powered_WaitForConnect;
}
break;
case HOST_STATE_Powered_WaitForConnect:
if (USB_INT_HasOccurred(USB_INT_DCONNI))
{
USB_INT_Clear(USB_INT_DCONNI);
USB_INT_Clear(USB_INT_DDISCI);
USB_INT_Clear(USB_INT_VBERRI);
USB_INT_Enable(USB_INT_VBERRI);
USB_Host_ResumeBus();
Pipe_ClearPipes();
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset);
}
break;
case HOST_STATE_Powered_DoReset:
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe);
break;
case HOST_STATE_Powered_ConfigPipe:
Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP,
PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE);
if (!(Pipe_IsConfigured()))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_HostState = HOST_STATE_Default;
break;
case HOST_STATE_Default:
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_GetDescriptor,
.wValue = (DTYPE_Device << 8),
.wIndex = 0,
.wLength = 8,
};
uint8_t DataBuffer[8];
if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
USB_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)];
USB_Host_ResetDevice();
HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset);
break;
case HOST_STATE_Default_PostReset:
Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL,
PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP,
USB_ControlPipeSize, PIPE_BANK_SINGLE);
if (!(Pipe_IsConfigured()))
{
ErrorCode = HOST_ENUMERROR_PipeConfigError;
SubErrorCode = 0;
break;
}
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
.bRequest = REQ_SetAddress,
.wValue = USB_HOST_DEVICEADDRESS,
.wIndex = 0,
.wLength = 0,
};
if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
ErrorCode = HOST_ENUMERROR_ControlError;
break;
}
HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet);
break;
case HOST_STATE_Default_PostAddressSet:
USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS);
EVENT_USB_Host_DeviceEnumerationComplete();
USB_HostState = HOST_STATE_Addressed;
break;
}
if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached))
{
EVENT_USB_Host_DeviceEnumerationFailed(ErrorCode, SubErrorCode);
USB_Host_VBUS_Auto_Off();
EVENT_USB_Host_DeviceUnattached();
USB_ResetInterface();
}
}
uint8_t USB_Host_WaitMS(uint8_t MS)
{
bool BusSuspended = USB_Host_IsBusSuspended();
uint8_t ErrorCode = HOST_WAITERROR_Successful;
bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
USB_INT_Disable(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_HSOFI);
USB_Host_ResumeBus();
while (MS)
{
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
MS--;
}
if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode != USB_MODE_Host))
{
ErrorCode = HOST_WAITERROR_DeviceDisconnect;
break;
}
if (Pipe_IsError() == true)
{
Pipe_ClearError();
ErrorCode = HOST_WAITERROR_PipeError;
break;
}
if (Pipe_IsStalled() == true)
{
Pipe_ClearStall();
ErrorCode = HOST_WAITERROR_SetupStalled;
break;
}
}
if (BusSuspended)
USB_Host_SuspendBus();
if (HSOFIEnabled)
USB_INT_Enable(USB_INT_HSOFI);
return ErrorCode;
}
static void USB_Host_ResetDevice(void)
{
bool BusSuspended = USB_Host_IsBusSuspended();
USB_INT_Disable(USB_INT_DDISCI);
USB_Host_ResetBus();
while (!(USB_Host_IsBusResetComplete()));
USB_Host_ResumeBus();
bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
USB_INT_Disable(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_HSOFI);
for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
{
/* Workaround for powerless-pull-up devices. After a USB bus reset,
all disconnection interrupts are suppressed while a USB frame is
looked for - if it is found within 10ms, the device is still
present. */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
USB_INT_Clear(USB_INT_HSOFI);
USB_INT_Clear(USB_INT_DDISCI);
break;
}
_delay_ms(1);
}
if (HSOFIEnabled)
USB_INT_Enable(USB_INT_HSOFI);
if (BusSuspended)
USB_Host_SuspendBus();
USB_INT_Enable(USB_INT_DDISCI);
}
void USB_ResetInterface(void)
{
USB_INT_DisableAllInterrupts();
USB_INT_ClearAllInterrupts();
#if defined(USB_CAN_BE_HOST)
USB_HostState = HOST_STATE_Unattached;
#endif
#if defined(USB_CAN_BE_DEVICE)
USB_DeviceState = DEVICE_STATE_Unattached;
USB_ConfigurationNumber = 0;
#if !defined(NO_DEVICE_REMOTE_WAKEUP)
USB_RemoteWakeupEnabled = false;
#endif
#if !defined(NO_DEVICE_SELF_POWER)
USB_CurrentlySelfPowered = false;
#endif
#endif
if (!(USB_Options & USB_OPT_MANUAL_PLL))
{
#if defined(USB_SERIES_4_AVR)
PLLFRQ = ((1 << PLLUSB) | (1 << PDIV3) | (1 << PDIV1));
#endif
USB_PLL_On();
while (!(USB_PLL_IsReady()));
}
USB_Controller_Reset();
#if defined(USB_CAN_BE_BOTH)
if (UHWCON & (1 << UIDE))
{
USB_INT_Clear(USB_INT_IDTI);
USB_INT_Enable(USB_INT_IDTI);
USB_CurrentMode = USB_GetUSBModeFromUID();
}
#endif
if (!(USB_Options & USB_OPT_REG_DISABLED))
USB_REG_On();
else
USB_REG_Off();
USB_CLK_Unfreeze();
#if (defined(USB_CAN_BE_DEVICE) && (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)))
if (USB_CurrentMode == USB_MODE_DEVICE)
{
if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
USB_Device_SetLowSpeed();
else
USB_Device_SetFullSpeed();
}
#endif
#if (defined(USB_CAN_BE_DEVICE) && !defined(FIXED_CONTROL_ENDPOINT_SIZE))
if (USB_CurrentMode == USB_MODE_DEVICE)
{
USB_Descriptor_Device_t* DeviceDescriptorPtr;
if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
{
#if defined(USE_RAM_DESCRIPTORS)
USB_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
#elif defined(USE_EEPROM_DESCRIPTORS)
USB_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
#else
USB_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
#endif
}
}
#endif
USB_Attach();
#if defined(USB_DEVICE_ONLY)
USB_INT_Clear(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_SUSPEND);
USB_INT_Clear(USB_INT_EORSTI);
USB_INT_Enable(USB_INT_EORSTI);
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
USB_INT_Enable(USB_INT_VBUS);
#endif
#elif defined(USB_HOST_ONLY)
USB_Host_HostMode_On();
USB_Host_VBUS_Auto_Off();
USB_OTGPAD_Off();
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
#else
if (USB_CurrentMode == USB_MODE_DEVICE)
{
USB_INT_Clear(USB_INT_SUSPEND);
USB_INT_Enable(USB_INT_SUSPEND);
USB_INT_Clear(USB_INT_EORSTI);
USB_INT_Enable(USB_INT_EORSTI);
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
USB_INT_Enable(USB_INT_VBUS);
#endif
#if defined(CONTROL_ONLY_DEVICE)
UENUM = ENDPOINT_CONTROLEP;
#endif
}
else if (USB_CurrentMode == USB_MODE_HOST)
{
USB_Host_HostMode_On();
USB_Host_VBUS_Auto_Off();
USB_OTGPAD_Off();
USB_Host_VBUS_Manual_Enable();
USB_Host_VBUS_Manual_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
}
#endif
}
