static
void i2400m_report_state_hook(struct i2400m *i2400m,
const struct i2400m_l3l4_hdr *l3l4_hdr,
size_t size, const char *tag)
{
struct device *dev = i2400m_dev(i2400m);
const struct i2400m_tlv_hdr *tlv;
size_t tlv_size = le16_to_cpu(l3l4_hdr->length);
d_fnstart(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s)\n",
i2400m, l3l4_hdr, size, tag);
tlv = NULL;
while ((tlv = i2400m_tlv_buffer_walk(i2400m, &l3l4_hdr->pl,
tlv_size, tlv)))
i2400m_report_state_parse_tlv(i2400m, tlv, tag);
d_fnend(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s) = void\n",
i2400m, l3l4_hdr, size, tag);
}
/*
* TX an skb to an idle device
*
* When the device is in basestation-idle mode, we need to wake it up
* and then TX. So we queue a work_struct for doing so.
*
* We need to get an extra ref for the skb (so it is not dropped), as
* well as be careful not to queue more than one request (won't help
* at all). If more than one request comes or there are errors, we
* just drop the packets (see i2400m_hard_start_xmit()).
*/
static
int i2400m_net_wake_tx(struct i2400m *i2400m, struct net_device *net_dev,
struct sk_buff *skb)
{
int result;
struct device *dev = i2400m_dev(i2400m);
unsigned long flags;
d_fnstart(3, dev, "(skb %p net_dev %p)\n", skb, net_dev);
if (net_ratelimit()) {
d_printf(3, dev, "WAKE&NETTX: "
"skb %p sending %d bytes to radio\n",
skb, skb->len);
d_dump(4, dev, skb->data, skb->len);
}
/* We hold a ref count for i2400m and skb, so when
* stopping() the device, we need to cancel that work
* and if pending, release those resources. */
result = 0;
spin_lock_irqsave(&i2400m->tx_lock, flags);
if (!work_pending(&i2400m->wake_tx_ws)) {
netif_stop_queue(net_dev);
i2400m_get(i2400m);
i2400m->wake_tx_skb = skb_get(skb); /* transfer ref count */
i2400m_tx_prep_header(skb);
result = schedule_work(&i2400m->wake_tx_ws);
WARN_ON(result == 0);
}
spin_unlock_irqrestore(&i2400m->tx_lock, flags);
if (result == 0) {
/* Yes, this happens even if we stopped the
* queue -- blame the queue disciplines that
* queue without looking -- I guess there is a reason
* for that. */
if (net_ratelimit())
d_printf(1, dev, "NETTX: device exiting idle, "
"dropping skb %p, queue running %d\n",
skb, netif_queue_stopped(net_dev));
result = -EBUSY;
}
d_fnend(3, dev, "(skb %p net_dev %p) = %d\n", skb, net_dev, result);
return result;
}
static
int i2400m_open(struct net_device *net_dev)
{
int result;
struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
struct device *dev = i2400m_dev(i2400m);
d_fnstart(3, dev, "(net_dev %p [i2400m %p])\n", net_dev, i2400m);
/* Make sure we wait until init is complete... */
mutex_lock(&i2400m->init_mutex);
if (i2400m->updown)
result = 0;
else
result = -EBUSY;
mutex_unlock(&i2400m->init_mutex);
d_fnend(3, dev, "(net_dev %p [i2400m %p]) = %d\n",
net_dev, i2400m, result);
return result;
}
static
int i2400mu_txd(void *_i2400mu)
{
struct i2400mu *i2400mu = _i2400mu;
struct i2400m *i2400m = &i2400mu->i2400m;
struct device *dev = &i2400mu->usb_iface->dev;
struct i2400m_msg_hdr *tx_msg;
size_t tx_msg_size;
unsigned long flags;
d_fnstart(4, dev, "(i2400mu %p)\n", i2400mu);
spin_lock_irqsave(&i2400m->tx_lock, flags);
BUG_ON(i2400mu->tx_kthread != NULL);
i2400mu->tx_kthread = current;
spin_unlock_irqrestore(&i2400m->tx_lock, flags);
while (1) {
d_printf(2, dev, "TX: waiting for messages\n");
tx_msg = NULL;
wait_event_interruptible(
i2400mu->tx_wq,
(kthread_should_stop() /* */
|| (tx_msg = i2400m_tx_msg_get(i2400m, &tx_msg_size)))
);
if (kthread_should_stop())
break;
WARN_ON(tx_msg == NULL); /* */
d_printf(2, dev, "TX: submitting %zu bytes\n", tx_msg_size);
d_dump(5, dev, tx_msg, tx_msg_size);
/* */
i2400mu_tx(i2400mu, tx_msg, tx_msg_size);
i2400m_tx_msg_sent(i2400m); /* */
}
spin_lock_irqsave(&i2400m->tx_lock, flags);
i2400mu->tx_kthread = NULL;
spin_unlock_irqrestore(&i2400m->tx_lock, flags);
d_fnend(4, dev, "(i2400mu %p)\n", i2400mu);
return 0;
}
/*
* Transmit a packet to the base station on behalf of the network stack.
*
* Returns: 0 if ok, < 0 errno code on error.
*
* We need to pull the ethernet header and add the hardware header,
* which is currently set to all zeroes and reserved.
*/
static
int i2400m_net_tx(struct i2400m *i2400m, struct net_device *net_dev,
struct sk_buff *skb)
{
int result;
struct device *dev = i2400m_dev(i2400m);
d_fnstart(3, dev, "(i2400m %p net_dev %p skb %p)\n",
i2400m, net_dev, skb);
/* FIXME: check eth hdr, only IPv4 is routed by the device as of now */
net_dev->trans_start = jiffies;
i2400m_tx_prep_header(skb);
d_printf(3, dev, "NETTX: skb %p sending %d bytes to radio\n",
skb, skb->len);
d_dump(4, dev, skb->data, skb->len);
result = i2400m_tx(i2400m, skb->data, skb->len, I2400M_PT_DATA);
d_fnend(3, dev, "(i2400m %p net_dev %p skb %p) = %d\n",
i2400m, net_dev, skb, result);
return result;
}
/*
* Send a Report State Change message (as created with _alloc).
*
* @report_skb: as returned by wimax_gnl_re_state_change_alloc()
* @header: as returned by wimax_gnl_re_state_change_alloc()
*
* Returns: 0 if ok, < 0 errno code on error.
*
* If the message is NULL, pretend it didn't happen.
*/
static
int wimax_gnl_re_state_change_send(
struct wimax_dev *wimax_dev, struct sk_buff *report_skb,
void *header)
{
int result = 0;
struct device *dev = wimax_dev_to_dev(wimax_dev);
d_fnstart(3, dev, "(wimax_dev %p report_skb %p)\n",
wimax_dev, report_skb);
if (report_skb == NULL) {
result = -ENOMEM;
goto out;
}
genlmsg_end(report_skb, header);
genlmsg_multicast(&wimax_gnl_family, report_skb, 0, 0, GFP_KERNEL);
out:
d_fnend(3, dev, "(wimax_dev %p report_skb %p) = %d\n",
wimax_dev, report_skb, result);
return result;
}
static
int i2400mu_resume(struct usb_interface *iface)
{
int ret = 0;
struct device *dev = &iface->dev;
struct i2400mu *i2400mu = usb_get_intfdata(iface);
struct i2400m *i2400m = &i2400mu->i2400m;
d_fnstart(3, dev, "(iface %p)\n", iface);
if (i2400m->updown == 0) {
d_printf(1, dev, "fw was down, no resume neeed\n");
goto out;
}
d_printf(1, dev, "fw was up, resuming\n");
i2400mu_notification_setup(i2400mu);
out:
d_fnend(3, dev, "(iface %p) = %d\n", iface, ret);
return ret;
}
/**
* i2400m_tx_msg_sent - indicate the transmission of a TX message
*
* @i2400m: device descriptor
*
* Called by the bus-specific driver when a message has been sent;
* this pops it from the FIFO; and as there is space, start the queue
* in case it was stopped.
*
* Should be called even if the message send failed and we are
* dropping this TX message.
*/
void i2400m_tx_msg_sent(struct i2400m *i2400m)
{
unsigned n;
unsigned long flags;
struct device *dev = i2400m_dev(i2400m);
d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
spin_lock_irqsave(&i2400m->tx_lock, flags);
i2400m->tx_out += i2400m->tx_msg_size;
d_printf(2, dev, "TX: sent %zu b\n", (size_t) i2400m->tx_msg_size);
i2400m->tx_msg_size = 0;
BUG_ON(i2400m->tx_out > i2400m->tx_in);
/* level them FIFO markers off */
n = i2400m->tx_out / I2400M_TX_BUF_SIZE;
i2400m->tx_out %= I2400M_TX_BUF_SIZE;
i2400m->tx_in -= n * I2400M_TX_BUF_SIZE;
netif_start_queue(i2400m->wimax_dev.net_dev);
spin_unlock_irqrestore(&i2400m->tx_lock, flags);
d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
}
ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m,
struct i2400m_bootrom_header *ack,
size_t ack_size)
{
ssize_t result;
struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
int size;
BUG_ON(sizeof(*ack) > ack_size);
d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n",
i2400m, ack, ack_size);
result = wait_event_timeout(i2400ms->bm_wfa_wq,
i2400ms->bm_ack_size != -EINPROGRESS,
2 * HZ);
if (result == 0) {
result = -ETIMEDOUT;
dev_err(dev, "BM: error waiting for an ack\n");
goto error_timeout;
}
spin_lock(&i2400m->rx_lock);
result = i2400ms->bm_ack_size;
BUG_ON(result == -EINPROGRESS);
if (result < 0)
dev_err(dev, "BM: %s failed: %zd\n", __func__, result);
else {
size = min(ack_size, i2400ms->bm_ack_size);
memcpy(ack, i2400m->bm_ack_buf, size);
}
i2400ms->bm_ack_size = -EINPROGRESS;
spin_unlock(&i2400m->rx_lock);
error_timeout:
d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %zd\n",
i2400m, ack, ack_size, result);
return result;
}
/*
* i2400m_net_rx - pass a network packet to the stack
*
* @i2400m: device instance
* @skb_rx: the skb where the buffer pointed to by @buf is
* @i: 1 if payload is the only one
* @buf: pointer to the buffer containing the data
* @len: buffer's length
*
* This is only used now for the v1.3 firmware. It will be deprecated
* in >= 2.6.31.
*
* Note that due to firmware limitations, we don't have space to add
* an ethernet header, so we need to copy each packet. Firmware
* versions >= v1.4 fix this [see i2400m_net_erx()].
*
* We just clone the skb and set it up so that it's skb->data pointer
* points to "buf" and it's length.
*
* Note that if the payload is the last (or the only one) in a
* multi-payload message, we don't clone the SKB but just reuse it.
*
* This function is normally run from a thread context. However, we
* still use netif_rx() instead of netif_receive_skb() as was
* recommended in the mailing list. Reason is in some stress tests
* when sending/receiving a lot of data we seem to hit a softlock in
* the kernel's TCP implementation [aroudn tcp_delay_timer()]. Using
* netif_rx() took care of the issue.
*
* This is, of course, still open to do more research on why running
* with netif_receive_skb() hits this softlock. FIXME.
*
* FIXME: currently we don't do any efforts at distinguishing if what
* we got was an IPv4 or IPv6 header, to setup the protocol field
* correctly.
*/
void i2400m_net_rx(struct i2400m *i2400m, struct sk_buff *skb_rx,
unsigned i, const void *buf, int buf_len)
{
struct net_device *net_dev = i2400m->wimax_dev.net_dev;
struct device *dev = i2400m_dev(i2400m);
struct sk_buff *skb;
d_fnstart(2, dev, "(i2400m %p buf %p buf_len %d)\n",
i2400m, buf, buf_len);
if (i) {
skb = skb_get(skb_rx);
d_printf(2, dev, "RX: reusing first payload skb %p\n", skb);
skb_pull(skb, buf - (void *) skb->data);
skb_trim(skb, (void *) skb_end_pointer(skb) - buf);
} else {
/* Yes, this is bad -- a lot of overhead -- see
* comments at the top of the file */
skb = __netdev_alloc_skb(net_dev, buf_len, GFP_KERNEL);
if (skb == NULL) {
dev_err(dev, "NETRX: no memory to realloc skb\n");
net_dev->stats.rx_dropped++;
goto error_skb_realloc;
}
memcpy(skb_put(skb, buf_len), buf, buf_len);
}
i2400m_rx_fake_eth_header(i2400m->wimax_dev.net_dev,
skb->data - ETH_HLEN,
cpu_to_be16(ETH_P_IP));
skb_set_mac_header(skb, -ETH_HLEN);
skb->dev = i2400m->wimax_dev.net_dev;
skb->protocol = htons(ETH_P_IP);
net_dev->stats.rx_packets++;
net_dev->stats.rx_bytes += buf_len;
d_printf(3, dev, "NETRX: receiving %d bytes to network stack\n",
buf_len);
d_dump(4, dev, buf, buf_len);
netif_rx_ni(skb); /* see notes in function header */
error_skb_realloc:
d_fnend(2, dev, "(i2400m %p buf %p buf_len %d) = void\n",
i2400m, buf, buf_len);
}
static
int i2400m_fw_bootstrap(struct i2400m *i2400m, const struct firmware *fw,
enum i2400m_bri flags)
{
int ret;
struct device *dev = i2400m_dev(i2400m);
const struct i2400m_bcf_hdr *bcf; /* Firmware data */
d_fnstart(5, dev, "(i2400m %p)\n", i2400m);
bcf = (void *) fw->data;
ret = i2400m_fw_check(i2400m, bcf, fw->size);
if (ret >= 0)
ret = i2400m_fw_dnload(i2400m, bcf, fw->size, flags);
if (ret < 0)
dev_err(dev, "%s: cannot use: %d, skipping\n",
i2400m->fw_name, ret);
kfree(i2400m->fw_hdrs);
i2400m->fw_hdrs = NULL;
d_fnend(5, dev, "(i2400m %p) = %d\n", i2400m, ret);
return ret;
}
/*
* Translate from rfkill state to wimax state
*
* NOTE: Special state handling rules here
*
* Just pretend the call didn't happen if we are in a state where
* we know for sure it cannot be handled (WIMAX_ST_DOWN or
* __WIMAX_ST_QUIESCING). rfkill() needs it to register and
* unregister, as it will run this path.
*
* NOTE: This call will block until the operation is completed.
*/
static int wimax_rfkill_set_radio_block(void *data, bool blocked)
{
int result;
struct wimax_dev *wimax_dev = data;
struct device *dev = wimax_dev_to_dev(wimax_dev);
enum wimax_rf_state rf_state;
d_fnstart(3, dev, "(wimax_dev %p blocked %u)\n", wimax_dev, blocked);
rf_state = WIMAX_RF_ON;
if (blocked)
rf_state = WIMAX_RF_OFF;
mutex_lock(&wimax_dev->mutex);
if (wimax_dev->state <= __WIMAX_ST_QUIESCING)
result = 0;
else
result = __wimax_rf_toggle_radio(wimax_dev, rf_state);
mutex_unlock(&wimax_dev->mutex);
d_fnend(3, dev, "(wimax_dev %p blocked %u) = %d\n",
wimax_dev, blocked, result);
return result;
}
/*
* Read the MAC addr
*
* The position this function reads is fixed in device memory and
* always available, even without firmware.
*
* Note we specify we want to read only six bytes, but provide space
* for 16, as we always get it rounded up.
*/
int i2400m_read_mac_addr(struct i2400m *i2400m)
{
int result;
struct device *dev = i2400m_dev(i2400m);
struct net_device *net_dev = i2400m->wimax_dev.net_dev;
struct i2400m_bootrom_header *cmd;
struct {
struct i2400m_bootrom_header ack;
u8 ack_pl[16];
} __packed ack_buf;
d_fnstart(5, dev, "(i2400m %p)\n", i2400m);
cmd = i2400m->bm_cmd_buf;
cmd->command = i2400m_brh_command(I2400M_BRH_READ, 0, 1);
cmd->target_addr = cpu_to_le32(0x00203fe8);
cmd->data_size = cpu_to_le32(6);
result = i2400m_bm_cmd(i2400m, cmd, sizeof(*cmd),
&ack_buf.ack, sizeof(ack_buf), 0);
if (result < 0) {
dev_err(dev, "BM: read mac addr failed: %d\n", result);
goto error_read_mac;
}
d_printf(2, dev, "mac addr is %pM\n", ack_buf.ack_pl);
if (i2400m->bus_bm_mac_addr_impaired == 1) {
ack_buf.ack_pl[0] = 0x00;
ack_buf.ack_pl[1] = 0x16;
ack_buf.ack_pl[2] = 0xd3;
get_random_bytes(&ack_buf.ack_pl[3], 3);
dev_err(dev, "BM is MAC addr impaired, faking MAC addr to "
"mac addr is %pM\n", ack_buf.ack_pl);
result = 0;
}
net_dev->addr_len = ETH_ALEN;
memcpy(net_dev->perm_addr, ack_buf.ack_pl, ETH_ALEN);
memcpy(net_dev->dev_addr, ack_buf.ack_pl, ETH_ALEN);
error_read_mac:
d_fnend(5, dev, "(i2400m %p) = %d\n", i2400m, result);
return result;
}
static
void i2400ms_irq(struct sdio_func *func)
{
int ret;
struct i2400ms *i2400ms = sdio_get_drvdata(func);
struct device *dev = &func->dev;
int val;
d_fnstart(6, dev, "(i2400ms %p)\n", i2400ms);
val = sdio_readb(func, I2400MS_INTR_STATUS_ADDR, &ret);
if (ret < 0) {
dev_err(dev, "RX: Can't read interrupt status: %d\n", ret);
goto error_no_irq;
}
if (!val) {
dev_err(dev, "RX: BUG? got IRQ but no interrupt ready?\n");
goto error_no_irq;
}
i2400ms_rx(i2400ms);
error_no_irq:
d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms);
}
/*
* Initialize a non signed boot
*
* This implies sending some magic values to the device's memory. Note
* we convert the values to little endian in the same array
* declaration.
*/
static
int i2400m_dnload_init_nonsigned(struct i2400m *i2400m)
{
unsigned i = 0;
int ret = 0;
struct device *dev = i2400m_dev(i2400m);
d_fnstart(5, dev, "(i2400m %p)\n", i2400m);
if (i2400m->bus_bm_pokes_table) {
while (i2400m->bus_bm_pokes_table[i].address) {
ret = i2400m_download_chunk(
i2400m,
&i2400m->bus_bm_pokes_table[i].data,
sizeof(i2400m->bus_bm_pokes_table[i].data),
i2400m->bus_bm_pokes_table[i].address, 1, 1);
if (ret < 0)
break;
i++;
}
}
d_fnend(5, dev, "(i2400m %p) = %d\n", i2400m, ret);
return ret;
}
static
int i2400mu_resume(struct usb_interface *iface)
{
int ret = 0;
struct device *dev = &iface->dev;
struct i2400mu *i2400mu = usb_get_intfdata(iface);
struct i2400m *i2400m = &i2400mu->i2400m;
d_fnstart(3, dev, "(iface %p)\n", iface);
if (i2400m->updown == 0) {
d_printf(1, dev, "fw was down, no resume neeed\n");
goto out;
}
d_printf(1, dev, "fw was up, resuming\n");
i2400mu_notification_setup(i2400mu);
/* USB has flow control, so we don't need to give it time to
* come back; otherwise, we'd use something like a get-state
* command... */
out:
d_fnend(3, dev, "(iface %p) = %d\n", iface, ret);
return ret;
}
int wimax_rfkill(struct wimax_dev *wimax_dev, enum wimax_rf_state state)
{
int result;
struct device *dev = wimax_dev_to_dev(wimax_dev);
d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
mutex_lock(&wimax_dev->mutex);
result = wimax_dev_is_ready(wimax_dev);
if (result < 0) {
/*
*/
if (result == -ENOMEDIUM && state == WIMAX_RF_QUERY)
result = WIMAX_RF_OFF << 1 | WIMAX_RF_OFF;
goto error_not_ready;
}
switch (state) {
case WIMAX_RF_ON:
case WIMAX_RF_OFF:
result = __wimax_rf_toggle_radio(wimax_dev, state);
if (result < 0)
goto error;
rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF);
break;
case WIMAX_RF_QUERY:
break;
default:
result = -EINVAL;
goto error;
}
result = wimax_dev->rf_sw << 1 | wimax_dev->rf_hw;
error:
error_not_ready:
mutex_unlock(&wimax_dev->mutex);
d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n",
wimax_dev, state, result);
return result;
}
/**
* Get the IEs that a radio controller is sending in its beacon
*
* @uwb_rc: UWB Radio Controller
* @returns: Size read from the system
*
* We don't need to lock the uwb_rc's mutex because we don't modify
* anything. Once done with the iedata buffer, call
* uwb_rc_ie_release(iedata). Don't call kfree on it.
*/
ssize_t uwb_rc_get_ie(struct uwb_rc *uwb_rc, struct uwb_rc_evt_get_ie **pget_ie)
{
ssize_t result;
struct device *dev = &uwb_rc->uwb_dev.dev;
struct uwb_rccb *cmd = NULL;
struct uwb_rceb *reply = NULL;
struct uwb_rc_evt_get_ie *get_ie;
d_fnstart(3, dev, "(%p, %p)\n", uwb_rc, pget_ie);
result = -ENOMEM;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
goto error_kzalloc;
cmd->bCommandType = UWB_RC_CET_GENERAL;
cmd->wCommand = cpu_to_le16(UWB_RC_CMD_GET_IE);
result = uwb_rc_vcmd(uwb_rc, "GET_IE", cmd, sizeof(*cmd),
UWB_RC_CET_GENERAL, UWB_RC_CMD_GET_IE,
&reply);
if (result < 0)
goto error_cmd;
get_ie = container_of(reply, struct uwb_rc_evt_get_ie, rceb);
if (result < sizeof(*get_ie)) {
dev_err(dev, "not enough data returned for decoding GET IE "
"(%zu bytes received vs %zu needed)\n",
result, sizeof(*get_ie));
result = -EINVAL;
} else if (result < sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)) {
dev_err(dev, "not enough data returned for decoding GET IE "
"payload (%zu bytes received vs %zu needed)\n", result,
sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength));
result = -EINVAL;
} else
*pget_ie = get_ie;
error_cmd:
kfree(cmd);
error_kzalloc:
d_fnend(3, dev, "(%p, %p) = %d\n", uwb_rc, pget_ie, (int)result);
return result;
}
void i2400m_tx_msg_sent(struct i2400m *i2400m)
{
unsigned n;
unsigned long flags;
struct device *dev = i2400m_dev(i2400m);
d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
spin_lock_irqsave(&i2400m->tx_lock, flags);
if (i2400m->tx_buf == NULL)
goto out_unlock;
i2400m->tx_out += i2400m->tx_msg_size;
d_printf(2, dev, "TX: sent %zu b\n", (size_t) i2400m->tx_msg_size);
i2400m->tx_msg_size = 0;
BUG_ON(i2400m->tx_out > i2400m->tx_in);
n = i2400m->tx_out / I2400M_TX_BUF_SIZE;
i2400m->tx_out %= I2400M_TX_BUF_SIZE;
i2400m->tx_in -= n * I2400M_TX_BUF_SIZE;
out_unlock:
spin_unlock_irqrestore(&i2400m->tx_lock, flags);
d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
}
/*
* Cleanup resources acquired during i2400m_net_wake_tx()
*
* This is called by __i2400m_dev_stop and means we have to make sure
* the workqueue is flushed from any pending work.
*/
void i2400m_net_wake_stop(struct i2400m *i2400m)
{
struct device *dev = i2400m_dev(i2400m);
d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
/* See i2400m_hard_start_xmit(), references are taken there
* and here we release them if the work was still
* pending. Note we can't differentiate work not pending vs
* never scheduled, so the NULL check does that. */
if (cancel_work_sync(&i2400m->wake_tx_ws) == 0
&& i2400m->wake_tx_skb != NULL) {
unsigned long flags;
struct sk_buff *wake_tx_skb;
spin_lock_irqsave(&i2400m->tx_lock, flags);
wake_tx_skb = i2400m->wake_tx_skb; /* compat help */
i2400m->wake_tx_skb = NULL; /* compat help */
spin_unlock_irqrestore(&i2400m->tx_lock, flags);
i2400m_put(i2400m);
kfree_skb(wake_tx_skb);
}
d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
}
/*
* Transmit a packet to the base station on behalf of the network stack
*
*
* Returns: NETDEV_TX_OK (always, even in case of error)
*
* In case of error, we just drop it. Reasons:
*
* - we add a hw header to each skb, and if the network stack
* retries, we have no way to know if that skb has it or not.
*
* - network protocols have their own drop-recovery mechanisms
*
* - there is not much else we can do
*
* If the device is idle, we need to wake it up; that is an operation
* that will sleep. See i2400m_net_wake_tx() for details.
*/
static
netdev_tx_t i2400m_hard_start_xmit(struct sk_buff *skb,
struct net_device *net_dev)
{
struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
struct device *dev = i2400m_dev(i2400m);
int result;
d_fnstart(3, dev, "(skb %p net_dev %p)\n", skb, net_dev);
if (skb_header_cloned(skb)) {
/*
* Make tcpdump/wireshark happy -- if they are
* running, the skb is cloned and we will overwrite
* the mac fields in i2400m_tx_prep_header. Expand
* seems to fix this...
*/
result = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
if (result) {
result = NETDEV_TX_BUSY;
goto error_expand;
}
}
if (i2400m->state == I2400M_SS_IDLE)
result = i2400m_net_wake_tx(i2400m, net_dev, skb);
else
result = i2400m_net_tx(i2400m, net_dev, skb);
if (result < 0)
net_dev->stats.tx_dropped++;
else {
net_dev->stats.tx_packets++;
net_dev->stats.tx_bytes += skb->len;
}
result = NETDEV_TX_OK;
error_expand:
kfree_skb(skb);
d_fnend(3, dev, "(skb %p net_dev %p) = %d\n", skb, net_dev, result);
return result;
}
/**
* wimax_rfkill - Set the software RF switch state for a WiMAX device
*
* @wimax_dev: WiMAX device descriptor
*
* @state: New RF state.
*
* Returns:
*
* >= 0 toggle state if ok, < 0 errno code on error. The toggle state
* is returned as a bitmap, bit 0 being the hardware RF state, bit 1
* the software RF state.
*
* 0 means disabled (%WIMAX_RF_ON, radio on), 1 means enabled radio
* off (%WIMAX_RF_OFF).
*
* Description:
*
* Called by the user when he wants to request the WiMAX radio to be
* switched on (%WIMAX_RF_ON) or off (%WIMAX_RF_OFF). With
* %WIMAX_RF_QUERY, just the current state is returned.
*
* NOTE:
*
* This call will block until the operation is complete.
*/
int wimax_rfkill(struct wimax_dev *wimax_dev, enum wimax_rf_state state)
{
int result;
struct device *dev = wimax_dev_to_dev(wimax_dev);
d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
mutex_lock(&wimax_dev->mutex);
result = wimax_dev_is_ready(wimax_dev);
if (result < 0) {
/* While initializing, < 1.4.3 wimax-tools versions use
* this call to check if the device is a valid WiMAX
* device; so we allow it to proceed always,
* considering the radios are all off. */
if (result == -ENOMEDIUM && state == WIMAX_RF_QUERY)
result = WIMAX_RF_OFF << 1 | WIMAX_RF_OFF;
goto error_not_ready;
}
switch (state) {
case WIMAX_RF_ON:
case WIMAX_RF_OFF:
result = __wimax_rf_toggle_radio(wimax_dev, state);
if (result < 0)
goto error;
rfkill_set_sw_state(wimax_dev->rfkill, state == WIMAX_RF_OFF);
break;
case WIMAX_RF_QUERY:
break;
default:
result = -EINVAL;
goto error;
}
result = wimax_dev->rf_sw << 1 | wimax_dev->rf_hw;
error:
error_not_ready:
mutex_unlock(&wimax_dev->mutex);
d_fnend(3, dev, "(wimax_dev %p state %u) = %d\n",
wimax_dev, state, result);
return result;
}
/*
* Setup SDIO RX
*
* Hooks up the IRQ handler and then enables IRQs.
*/
int i2400ms_rx_setup(struct i2400ms *i2400ms)
{
int result;
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
struct i2400m *i2400m = &i2400ms->i2400m;
d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
init_waitqueue_head(&i2400ms->bm_wfa_wq);
spin_lock(&i2400m->rx_lock);
i2400ms->bm_wait_result = -EINPROGRESS;
/*
* Before we are about to enable the RX interrupt, make sure
* bm_ack_size is cleared to -EINPROGRESS which indicates
* no RX interrupt happened yet or the previous interrupt
* has been handled, we are ready to take the new interrupt
*/
i2400ms->bm_ack_size = -EINPROGRESS;
spin_unlock(&i2400m->rx_lock);
sdio_claim_host(func);
result = sdio_claim_irq(func, i2400ms_irq);
if (result < 0) {
dev_err(dev, "Cannot claim IRQ: %d\n", result);
goto error_irq_claim;
}
result = 0;
sdio_writeb(func, 1, I2400MS_INTR_ENABLE_ADDR, &result);
if (result < 0) {
sdio_release_irq(func);
dev_err(dev, "Failed to enable interrupts %d\n", result);
}
error_irq_claim:
sdio_release_host(func);
d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result);
return result;
}
/*
* Exporting to user space over generic netlink
*
* Parse the reset command from user space, return error code.
*
* No attributes.
*/
int wimax_gnl_doit_reset(struct sk_buff *skb, struct genl_info *info)
{
int result, ifindex;
struct wimax_dev *wimax_dev;
d_fnstart(3, NULL, "(skb %p info %p)\n", skb, info);
result = -ENODEV;
if (info->attrs[WIMAX_GNL_RESET_IFIDX] == NULL) {
printk(KERN_ERR "WIMAX_GNL_OP_RFKILL: can't find IFIDX "
"attribute\n");
goto error_no_wimax_dev;
}
ifindex = nla_get_u32(info->attrs[WIMAX_GNL_RESET_IFIDX]);
wimax_dev = wimax_dev_get_by_genl_info(info, ifindex);
if (wimax_dev == NULL)
goto error_no_wimax_dev;
/* Execute the operation and send the result back to user space */
result = wimax_reset(wimax_dev);
dev_put(wimax_dev->net_dev);
error_no_wimax_dev:
d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
return result;
}
/**
* wimax_reset - Reset a WiMAX device
*
* @wimax_dev: WiMAX device descriptor
*
* Returns:
*
* %0 if ok and a warm reset was done (the device still exists in
* the system).
*
* -%ENODEV if a cold/bus reset had to be done (device has
* disconnected and reconnected, so current handle is not valid
* any more).
*
* -%EINVAL if the device is not even registered.
*
* Any other negative error code shall be considered as
* non-recoverable.
*
* Description:
*
* Called when wanting to reset the device for any reason. Device is
* taken back to power on status.
*
* This call blocks; on successful return, the device has completed the
* reset process and is ready to operate.
*/
int wimax_reset(struct wimax_dev *wimax_dev)
{
int result = -EINVAL;
struct device *dev = wimax_dev_to_dev(wimax_dev);
enum wimax_st state;
might_sleep();
d_fnstart(3, dev, "(wimax_dev %p)\n", wimax_dev);
mutex_lock(&wimax_dev->mutex);
dev_hold(wimax_dev->net_dev);
state = wimax_dev->state;
mutex_unlock(&wimax_dev->mutex);
if (state >= WIMAX_ST_DOWN) {
mutex_lock(&wimax_dev->mutex_reset);
result = wimax_dev->op_reset(wimax_dev);
mutex_unlock(&wimax_dev->mutex_reset);
}
dev_put(wimax_dev->net_dev);
d_fnend(3, dev, "(wimax_dev %p) = %d\n", wimax_dev, result);
return result;
}
/*
* Send a Report State Change message (as created with _alloc).
*
* @report_skb: as returned by wimax_gnl_re_state_change_alloc()
* @header: as returned by wimax_gnl_re_state_change_alloc()
*
* Returns: 0 if ok, < 0 errno code on error.
*
* If the message is NULL, pretend it didn't happen.
*/
static
int wimax_gnl_re_state_change_send(
struct wimax_dev *wimax_dev, struct sk_buff *report_skb,
void *header)
{
int result = 0;
struct device *dev = wimax_dev_to_dev(wimax_dev);
d_fnstart(3, dev, "(wimax_dev %p report_skb %p)\n",
wimax_dev, report_skb);
if (report_skb == NULL)
goto out;
genlmsg_end(report_skb, header);
result = genlmsg_multicast(report_skb, 0, wimax_gnl_mcg.id, GFP_KERNEL);
if (result == -ESRCH) /* Nobody connected, ignore it */
result = 0; /* btw, the skb is freed already */
if (result < 0) {
dev_err(dev, "RE_STCH: Error sending: %d\n", result);
nlmsg_free(report_skb);
}
out:
d_fnend(3, dev, "(wimax_dev %p report_skb %p) = %d\n",
wimax_dev, report_skb, result);
return result;
}
/*
* Setup SDIO RX
*
* Hooks up the IRQ handler and then enables IRQs.
*/
int i2400ms_rx_setup(struct i2400ms *i2400ms)
{
int result;
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
sdio_claim_host(func);
result = sdio_claim_irq(func, i2400ms_irq);
if (result < 0) {
dev_err(dev, "Cannot claim IRQ: %d\n", result);
goto error_irq_claim;
}
result = 0;
sdio_writeb(func, 1, I2400MS_INTR_ENABLE_ADDR, &result);
if (result < 0) {
sdio_release_irq(func);
dev_err(dev, "Failed to enable interrupts %d\n", result);
}
error_irq_claim:
sdio_release_host(func);
d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result);
return result;
}
/*
* Parse and act on a TLV Media Status sent by the device
*
* @i2400m: device descriptor
* @ms: validated Media Status TLV
*
* This will set the carrier up on down based on the device's link
* report. This is done asides of what the WiMAX stack does based on
* the device's state as sometimes we need to do a link-renew (the BS
* wants us to renew a DHCP lease, for example).
*
* In fact, doc says that everytime we get a link-up, we should do a
* DHCP negotiation...
*/
static
void i2400m_report_tlv_media_status(struct i2400m *i2400m,
const struct i2400m_tlv_media_status *ms)
{
struct device *dev = i2400m_dev(i2400m);
struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
struct net_device *net_dev = wimax_dev->net_dev;
enum i2400m_media_status status = le32_to_cpu(ms->media_status);
d_fnstart(3, dev, "(i2400m %p ms %p [%u])\n", i2400m, ms, status);
if (unlikely(i2400m->ready == 0)) /* act if up */
goto out;
switch (status) {
case I2400M_MEDIA_STATUS_LINK_UP:
netif_carrier_on(net_dev);
break;
case I2400M_MEDIA_STATUS_LINK_DOWN:
netif_carrier_off(net_dev);
break;
/*
* This is the network telling us we need to retrain the DHCP
* lease -- so far, we are trusting the WiMAX Network Service
* in user space to pick this up and poke the DHCP client.
*/
case I2400M_MEDIA_STATUS_LINK_RENEW:
netif_carrier_on(net_dev);
break;
default:
dev_err(dev, "HW BUG? unknown media status %u\n",
status);
};
out:
d_fnend(3, dev, "(i2400m %p ms %p [%u]) = void\n",
i2400m, ms, status);
}
static
int wimax_gnl_doit_rfkill(struct sk_buff *skb, struct genl_info *info)
{
int result, ifindex;
struct wimax_dev *wimax_dev;
struct device *dev;
enum wimax_rf_state new_state;
d_fnstart(3, NULL, "(skb %p info %p)\n", skb, info);
result = -ENODEV;
if (info->attrs[WIMAX_GNL_RFKILL_IFIDX] == NULL) {
printk(KERN_ERR "WIMAX_GNL_OP_RFKILL: can't find IFIDX "
"attribute\n");
goto error_no_wimax_dev;
}
ifindex = nla_get_u32(info->attrs[WIMAX_GNL_RFKILL_IFIDX]);
wimax_dev = wimax_dev_get_by_genl_info(info, ifindex);
if (wimax_dev == NULL)
goto error_no_wimax_dev;
dev = wimax_dev_to_dev(wimax_dev);
result = -EINVAL;
if (info->attrs[WIMAX_GNL_RFKILL_STATE] == NULL) {
dev_err(dev, "WIMAX_GNL_RFKILL: can't find RFKILL_STATE "
"attribute\n");
goto error_no_pid;
}
new_state = nla_get_u32(info->attrs[WIMAX_GNL_RFKILL_STATE]);
/* Execute the operation and send the result back to user space */
result = wimax_rfkill(wimax_dev, new_state);
error_no_pid:
dev_put(wimax_dev->net_dev);
error_no_wimax_dev:
d_fnend(3, NULL, "(skb %p info %p) = %d\n", skb, info, result);
return result;
}
/*
* Transmit a packet to the base station on behalf of the network stack
*
*
* Returns: NETDEV_TX_OK (always, even in case of error)
*
* In case of error, we just drop it. Reasons:
*
* - we add a hw header to each skb, and if the network stack
* retries, we have no way to know if that skb has it or not.
*
* - network protocols have their own drop-recovery mechanisms
*
* - there is not much else we can do
*
* If the device is idle, we need to wake it up; that is an operation
* that will sleep. See i2400m_net_wake_tx() for details.
*/
static
int i2400m_hard_start_xmit(struct sk_buff *skb,
struct net_device *net_dev)
{
int result;
struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
struct device *dev = i2400m_dev(i2400m);
d_fnstart(3, dev, "(skb %p net_dev %p)\n", skb, net_dev);
if (i2400m->state == I2400M_SS_IDLE)
result = i2400m_net_wake_tx(i2400m, net_dev, skb);
else
result = i2400m_net_tx(i2400m, net_dev, skb);
if (result < 0)
net_dev->stats.tx_dropped++;
else {
net_dev->stats.tx_packets++;
net_dev->stats.tx_bytes += skb->len;
}
kfree_skb(skb);
result = NETDEV_TX_OK;
d_fnend(3, dev, "(skb %p net_dev %p) = %d\n", skb, net_dev, result);
return result;
}
