C++ (Cpp) pnp_set_irq0 Examples

Example #1

File: televideo_tc7010.c Project: B-Rich/serialice

static void superio_init(void)
{
	/* Set base address of power management unit */
	pnp_set_logical_device(SUPERIO_CONFIG_PORT, 8);
	pnp_set_enable(SUPERIO_CONFIG_PORT, 0);
	pnp_set_iobase0(SUPERIO_CONFIG_PORT, PM_BASE);
	pnp_set_enable(SUPERIO_CONFIG_PORT, 1);

	/* Use on-chip clock multiplier */
	outb(0x03, PM_BASE);
	outb(inb(PM_BASE + 1) | 0x07, PM_BASE + 1);

	/* Wait for the clock to stabilise */
	while (!(inb(PM_BASE + 1) & 0x80)) ;

	/* Enable the serial ports. */
	pnp_set_logical_device(SUPERIO_CONFIG_PORT, 6);	/* COM1 */
	pnp_set_enable(SUPERIO_CONFIG_PORT, 0);
	pnp_set_iobase0(SUPERIO_CONFIG_PORT, 0x3f8);
	pnp_set_irq0(SUPERIO_CONFIG_PORT, 4);
	pnp_set_enable(SUPERIO_CONFIG_PORT, 1);

	/* Set LDN 5 UART Mode */
	outb(0x21, SUPERIO_CONFIG_PORT);
	outb(inb(SUPERIO_CONFIG_PORT + 1) | (1 << 3), SUPERIO_CONFIG_PORT + 1);
	pnp_set_logical_device(SUPERIO_CONFIG_PORT, 5);	/* COM2 */
	pnp_set_enable(SUPERIO_CONFIG_PORT, 0);
	pnp_set_iobase0(SUPERIO_CONFIG_PORT, 0x2f8);
	pnp_set_irq0(SUPERIO_CONFIG_PORT, 3);
	pnp_set_enable(SUPERIO_CONFIG_PORT, 1);
}

Example #2

File: aopen_dxpl-plus.c Project: coreboot/serialice

static void superio_init(void)
{
	pnp_enter_ext_func_mode_alt(SUPERIO_CONFIG_PORT);

	pnp_set_logical_device(SUPERIO_CONFIG_PORT, 4); /* COM1 */
	pnp_set_enable(SUPERIO_CONFIG_PORT, 0);
	pnp_set_iobase0(SUPERIO_CONFIG_PORT, 0x3f8);
	pnp_set_irq0(SUPERIO_CONFIG_PORT, 4);
	pnp_set_enable(SUPERIO_CONFIG_PORT, 1);

#if 0
        /* Must route GPIO to UART2 before enabling this */
	pnp_set_logical_device(SUPERIO_CONFIG_PORT, 5); /* COM2 */
	pnp_set_enable(SUPERIO_CONFIG_PORT, 0);
	pnp_set_iobase0(SUPERIO_CONFIG_PORT, 0x2f8);
	pnp_set_irq0(SUPERIO_CONFIG_PORT, 3);
	pnp_set_enable(SUPERIO_CONFIG_PORT, 1);
#endif

	pnp_exit_ext_func_mode(SUPERIO_CONFIG_PORT);
}

Example #3

File: asus_p2b.c Project: coreboot/serialice

static void superio_init(void)
{
	/* Enter the configuration state. */
	pnp_enter_ext_func_mode(PNP_PORT);

	/* COMA */
	pnp_set_logical_device(PNP_PORT, 2);
	pnp_set_enable(PNP_PORT, 0);
	pnp_set_iobase0(PNP_PORT, CONFIG_SERIAL_PORT);
	pnp_set_irq0(PNP_PORT, 4);
	pnp_set_enable(PNP_PORT, 1);

	/* Exit the configuration state. */
	pnp_exit_ext_func_mode(PNP_PORT);
}

Example #4

File: thomson_ip1000.c Project: B-Rich/serialice

static void superio_init(void)
{
	/* Enter the configuration state. */
	pnp_enter_ext_func_mode_alt(0x2e);

	/* COMA */
	pnp_set_logical_device(0x2e, 4);
	pnp_set_enable(0x2e, 0);
	pnp_set_iobase0(0x2e, 0x3f8);
	pnp_set_irq0(0x2e, 4);
	pnp_set_enable(0x2e, 1);

	/* Exit the configuration state. */
	pnp_exit_ext_func_mode(0x2e);
}

Example #5

File: winbond-w83627thg.c Project: coreboot/serialice

static void superio_init(void)
{
	pnp_enter_ext_func_mode(0x2e);

	pnp_set_logical_device(0x2e, 2); // COM-A
	pnp_set_enable(0x2e, 0);
	pnp_set_iobase0(0x2e, 0x3f8);
	pnp_set_irq0(0x2e, 4);
	pnp_set_enable(0x2e, 1);

	pnp_set_logical_device(0x2e, 3); // COM-B
	pnp_set_enable(0x2e, 0);
	pnp_set_iobase0(0x2e, 0x2f8);
	pnp_set_irq0(0x2e, 3);
	pnp_set_enable(0x2e, 1);

	pnp_exit_ext_func_mode(0x2e);

	pnp_enter_ext_func_mode(0x4e);

	// Set COM3 to sane non-conflicting values
	pnp_set_logical_device(0x4e, 2); // COM-A
	pnp_set_enable(0x4e, 0);
	pnp_set_iobase0(0x4e, 0x3e8);
	pnp_set_irq0(0x4e, 11);
	pnp_set_enable(0x4e, 1);

	// Set COM4 to sane non-conflicting values
	pnp_set_logical_device(0x4e, 3); // COM-B
	pnp_set_enable(0x4e, 0);
	pnp_set_iobase0(0x4e, 0x2e8);
	pnp_set_irq0(0x4e, 10);
	pnp_set_enable(0x4e, 1);

	pnp_exit_ext_func_mode(0x4e);
}

Example #6

File: asus_m4a77td-pro.c Project: coreboot/serialice

static void superio_init(void)
{
	pnp_enter_ext_func_mode_ite(SUPERIO_CONFIG_PORT);

	/* Disable the watchdog. */
	pnp_set_logical_device(SUPERIO_CONFIG_PORT, 7);
	pnp_write_register(SUPERIO_CONFIG_PORT, 0x72, 0x00);

	/* Enable the serial port. */
	pnp_set_logical_device(SUPERIO_CONFIG_PORT, 1); /* COM1 */
	pnp_set_enable(SUPERIO_CONFIG_PORT, 0);
	pnp_set_iobase0(SUPERIO_CONFIG_PORT, 0x3f8);
	pnp_set_irq0(SUPERIO_CONFIG_PORT, 4);
	pnp_set_enable(SUPERIO_CONFIG_PORT, 1);

	pnp_exit_ext_func_mode_ite(SUPERIO_CONFIG_PORT);
}