void pwmout_period_us(pwmout_t* obj, int us)
{
TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
float dc = pwmout_read(obj);
__HAL_TIM_DISABLE(&TimHandle);
// Update the SystemCoreClock variable
SystemCoreClockUpdate();
TimHandle.Init.Period = us - 1;
TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
TimHandle.Init.ClockDivision = 0;
TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
HAL_TIM_PWM_Init(&TimHandle);
// Set duty cycle again
pwmout_write(obj, dc);
// Save for future use
obj->period = us;
__HAL_TIM_ENABLE(&TimHandle);
}
void pwmout_period_us(pwmout_t* obj, int us)
{
TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
float dc = pwmout_read(obj);
__HAL_TIM_DISABLE(&TimHandle);
TimHandle.Init.Period = us - 1;
TimHandle.Init.Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
TimHandle.Init.ClockDivision = 0;
TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
error("Cannot initialize PWM");
}
// Set duty cycle again
pwmout_write(obj, dc);
// Save for future use
obj->period = us;
__HAL_TIM_ENABLE(&TimHandle);
}
void pwmout_period_us(pwmout_t* obj, int us)
{
float dc = pwmout_read(obj);
obj->period = us;
// Set duty cycle again
pwmout_write(obj, dc);
}
void pwmout_period_us(pwmout_t* obj, int us)
{
TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
float dc = pwmout_read(obj);
__HAL_TIM_DISABLE(&TimHandle);
SystemCoreClockUpdate();
/* To make it simple, we use to possible prescaler values which lead to:
* pwm unit = 1us, period/pulse can be from 1us to 65535us
* or
* pwm unit = 500us, period/pulse can be from 500us to ~32.76sec
* Be careful that all the channels of a PWM shares the same prescaler
*/
if (us > 0xFFFF) {
obj->prescaler = 500;
} else {
obj->prescaler = 1;
}
TimHandle.Init.Prescaler = ((SystemCoreClock / 1000000) * obj->prescaler) - 1;
if (TimHandle.Init.Prescaler > 0xFFFF)
error("PWM: out of range prescaler");
TimHandle.Init.Period = (us - 1) / obj->prescaler;
if (TimHandle.Init.Period > 0xFFFF)
error("PWM: out of range period");
TimHandle.Init.ClockDivision = 0;
TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
error("Cannot initialize PWM\n");
}
// Save for future use
obj->period = us;
// Set duty cycle again
pwmout_write(obj, dc);
__HAL_TIM_ENABLE(&TimHandle);
}
void pwmout_period_us(pwmout_t* obj, int us) {
TIM_TypeDef *tim = (TIM_TypeDef *)(obj->pwm);
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
float dc = pwmout_read(obj);
TIM_Cmd(tim, DISABLE);
obj->period = us;
TIM_TimeBaseStructure.TIM_Period = obj->period - 1;
TIM_TimeBaseStructure.TIM_Prescaler = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 µs tick
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(tim, &TIM_TimeBaseStructure);
// Set duty cycle again
pwmout_write(obj, dc);
TIM_ARRPreloadConfig(tim, ENABLE);
TIM_Cmd(tim, ENABLE);
}
// Set the PWM period, keeping the duty cycle the same.
void pwmout_period_us(pwmout_t* obj, int us) {
float dc = pwmout_read(obj);
*obj->MOD = (uint32_t)(pwm_clock * (float)us) - 1;
pwmout_write(obj, dc);
}
void pwmout_period_us(pwmout_t* obj, int us)
{
TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
RCC_ClkInitTypeDef RCC_ClkInitStruct;
uint32_t PclkFreq;
uint32_t APBxCLKDivider;
float dc = pwmout_read(obj);
__HAL_TIM_DISABLE(&TimHandle);
// Get clock configuration
// Note: PclkFreq contains here the Latency (not used after)
HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq);
// Get the PCLK and APBCLK divider related to the timer
switch (obj->pwm) {
// APB1 clock
case PWM_2:
case PWM_3:
case PWM_4:
case PWM_5:
case PWM_12:
case PWM_13:
case PWM_14:
PclkFreq = HAL_RCC_GetPCLK1Freq();
APBxCLKDivider = RCC_ClkInitStruct.APB1CLKDivider;
break;
// APB2 clock
case PWM_1:
case PWM_8:
case PWM_9:
case PWM_10:
case PWM_11:
PclkFreq = HAL_RCC_GetPCLK2Freq();
APBxCLKDivider = RCC_ClkInitStruct.APB2CLKDivider;
break;
default:
return;
}
/* To make it simple, we use to possible prescaler values which lead to:
* pwm unit = 1us, period/pulse can be from 1us to 65535us
* or
* pwm unit = 500us, period/pulse can be from 500us to ~32.76sec
* Be careful that all the channels of a PWM shares the same prescaler
*/
if (us > 0xFFFF) {
obj->prescaler = 500;
} else {
obj->prescaler = 1;
}
// TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx
if (APBxCLKDivider == RCC_HCLK_DIV1)
TimHandle.Init.Prescaler = (uint16_t)(((PclkFreq) / 1000000) * obj->prescaler) - 1; // 1 us tick
else
TimHandle.Init.Prescaler = (uint16_t)(((PclkFreq * 2) / 1000000) * obj->prescaler) - 1; // 1 us tick
if (TimHandle.Init.Prescaler > 0xFFFF)
error("PWM: out of range prescaler");
TimHandle.Init.Period = (us - 1) / obj->prescaler;
if (TimHandle.Init.Period > 0xFFFF)
error("PWM: out of range period");
TimHandle.Init.ClockDivision = 0;
TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
error("Cannot initialize PWM\n");
}
// Save for future use
obj->period = us;
// Set duty cycle again
pwmout_write(obj, dc);
__HAL_TIM_ENABLE(&TimHandle);
}
// Set the PWM period, keeping the duty cycle the same.
void pwmout_period_us(pwmout_t* obj, int us) {
float dc = pwmout_read(obj);
*obj->MOD = PWM_CLOCK_MHZ * us;
pwmout_write(obj, dc);
}
void pwmout_period_us(pwmout_t* obj, int us)
{
TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
RCC_ClkInitTypeDef RCC_ClkInitStruct;
uint32_t PclkFreq;
uint32_t APBxCLKDivider;
float dc = pwmout_read(obj);
__HAL_TIM_DISABLE(&TimHandle);
// Get clock configuration
// Note: PclkFreq contains here the Latency (not used after)
HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq);
// Get the PCLK and APBCLK divider related to the timer
switch (obj->pwm) {
// APB1 clock
#if defined(TIM2_BASE)
case PWM_2:
#endif
#if defined(TIM3_BASE)
case PWM_3:
#endif
#if defined(TIM4_BASE)
case PWM_4:
#endif
#if defined(TIM5_BASE)
case PWM_5:
#endif
#if defined(TIM12_BASE)
case PWM_12:
#endif
#if defined(TIM13_BASE)
case PWM_13:
#endif
#if defined(TIM14_BASE)
case PWM_14:
#endif
PclkFreq = HAL_RCC_GetPCLK1Freq();
APBxCLKDivider = RCC_ClkInitStruct.APB1CLKDivider;
break;
// APB2 clock
#if defined(TIM1_BASE)
case PWM_1:
#endif
#if defined(TIM8_BASE)
case PWM_8:
#endif
#if defined(TIM9_BASE)
case PWM_9:
#endif
#if defined(TIM10_BASE)
case PWM_10:
#endif
#if defined(TIM11_BASE)
case PWM_11:
#endif
PclkFreq = HAL_RCC_GetPCLK2Freq();
APBxCLKDivider = RCC_ClkInitStruct.APB2CLKDivider;
break;
default:
return;
}
TimHandle.Init.Period = us - 1;
// TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx
if (APBxCLKDivider == RCC_HCLK_DIV1)
TimHandle.Init.Prescaler = (uint16_t)((PclkFreq) / 1000000) - 1; // 1 us tick
else
TimHandle.Init.Prescaler = (uint16_t)((PclkFreq * 2) / 1000000) - 1; // 1 us tick
TimHandle.Init.ClockDivision = 0;
TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
error("Cannot initialize PWM\n");
}
// Set duty cycle again
pwmout_write(obj, dc);
// Save for future use
obj->period = us;
__HAL_TIM_ENABLE(&TimHandle);
}
