int rf_rssi_scan(srslte_rf_t *rf, float *freqs, float *rssi, int nof_bands, double fs, int nsamp) {
int i, j;
int ret = -1;
cf_t *buffer;
double f;
buffer = calloc(nsamp, sizeof(cf_t));
if (!buffer) {
goto free_and_exit;
}
srslte_rf_set_rx_gain(rf, 20.0);
srslte_rf_set_rx_srate(rf, fs);
for (i=0;i<nof_bands;i++) {
srslte_rf_stop_rx_stream(rf);
f = (double) freqs[i];
srslte_rf_set_rx_freq(rf, f);
srslte_rf_rx_wait_lo_locked(rf);
usleep(10000);
srslte_rf_start_rx_stream(rf, false);
/* discard first samples */
for (j=0;j<2;j++) {
if (srslte_rf_recv(rf, buffer, nsamp, 1) != nsamp) {
goto free_and_exit;
}
}
rssi[i] = srslte_vec_avg_power_cf(buffer, nsamp);
printf("[%3d]: Freq %4.1f Mhz - RSSI: %3.2f dBm\r", i, f/1000000, 10*log10f(rssi[i]) + 30); fflush(stdout);
if (SRSLTE_VERBOSE_ISINFO()) {
printf("\n");
}
}
srslte_rf_stop_rx_stream(rf);
ret = 0;
free_and_exit:
free(buffer);
return ret;
}
/* This thread listens for set_rx_gain commands to the USRP */
static void* thread_gain_fcn(void *h) {
srslte_rf_t* rf = (srslte_rf_t*) h;
while(1) {
pthread_mutex_lock(&rf->mutex);
while(rf->cur_rx_gain == rf->new_rx_gain)
{
pthread_cond_wait(&rf->cond, &rf->mutex);
}
if (rf->new_rx_gain != rf->cur_rx_gain) {
rf->cur_rx_gain = rf->new_rx_gain;
srslte_rf_set_rx_gain(h, rf->cur_rx_gain);
}
if (rf->tx_gain_same_rx) {
srslte_rf_set_tx_gain(h, rf->cur_rx_gain+rf->tx_rx_gain_offset);
}
pthread_mutex_unlock(&rf->mutex);
}
return NULL;
}
int main(int argc, char **argv) {
parse_args(argc, argv);
uint32_t flen = srslte_sampling_freq_hz(nof_prb)/1000;
cf_t *rx_buffer = malloc(sizeof(cf_t)*flen*nof_frames);
if (!rx_buffer) {
perror("malloc");
exit(-1);
}
cf_t *tx_buffer = malloc(sizeof(cf_t)*(flen+time_adv_samples));
if (!tx_buffer) {
perror("malloc");
exit(-1);
}
bzero(tx_buffer, sizeof(cf_t)*(flen+time_adv_samples));
cf_t *zeros = calloc(sizeof(cf_t),flen);
if (!zeros) {
perror("calloc");
exit(-1);
}
float time_adv_sec = (float) time_adv_samples/srslte_sampling_freq_hz(nof_prb);
// Send through RF
srslte_rf_t rf;
printf("Opening RF device...\n");
if (srslte_rf_open(&rf, rf_args)) {
fprintf(stderr, "Error opening rf\n");
exit(-1);
}
srslte_rf_set_master_clock_rate(&rf, 30.72e6);
int srate = srslte_sampling_freq_hz(nof_prb);
if (srate < 10e6) {
srslte_rf_set_master_clock_rate(&rf, 4*srate);
} else {
srslte_rf_set_master_clock_rate(&rf, srate);
}
srslte_rf_set_rx_srate(&rf, (double) srate);
srslte_rf_set_tx_srate(&rf, (double) srate);
printf("Subframe len: %d samples\n", flen);
printf("Time advance: %f us\n",time_adv_sec*1e6);
printf("Set TX/RX rate: %.2f MHz\n", (float) srate / 1000000);
printf("Set RX gain: %.1f dB\n", srslte_rf_set_rx_gain(&rf, rf_rx_gain));
printf("Set TX gain: %.1f dB\n", srslte_rf_set_tx_gain(&rf, srslte_rf_tx_gain));
printf("Set TX/RX freq: %.2f MHz\n", srslte_rf_set_rx_freq(&rf, rf_freq) / 1000000);
srslte_rf_set_tx_freq(&rf, rf_freq);
sleep(1);
if (input_filename) {
srslte_vec_load_file(input_filename, &tx_buffer[time_adv_samples], flen*sizeof(cf_t));
} else {
for (int i=0;i<flen-time_adv_samples;i++) {
tx_buffer[i+time_adv_samples] = 0.3*cexpf(_Complex_I*2*M_PI*tone_offset_hz*((float) i/(float) srate));
}
srslte_vec_save_file("srslte_rf_txrx_tone", tx_buffer, flen*sizeof(cf_t));
}
srslte_timestamp_t tstamp;
srslte_rf_start_rx_stream(&rf);
uint32_t nframe=0;
while(nframe<nof_frames) {
printf("Rx subframe %d\n", nframe);
srslte_rf_recv_with_time(&rf, &rx_buffer[flen*nframe], flen, true, &tstamp.full_secs, &tstamp.frac_secs);
nframe++;
if (nframe==9) {
srslte_timestamp_add(&tstamp, 0, 2e-3-time_adv_sec);
srslte_rf_send_timed2(&rf, tx_buffer, flen+time_adv_samples, tstamp.full_secs, tstamp.frac_secs, true, true);
printf("Transmitting Signal\n");
}
}
srslte_vec_save_file(output_filename, &rx_buffer[10*flen], flen*sizeof(cf_t));
free(tx_buffer);
free(rx_buffer);
printf("Done\n");
exit(0);
}
int main(int argc, char **argv) {
int ret;
cf_t *sf_buffer;
prog_args_t prog_args;
srslte_cell_t cell;
int64_t sf_cnt;
srslte_ue_sync_t ue_sync;
srslte_ue_mib_t ue_mib;
srslte_rf_t rf;
srslte_ue_dl_t ue_dl;
srslte_ofdm_t fft;
srslte_chest_dl_t chest;
uint32_t nframes=0;
uint32_t nof_trials = 0;
uint32_t sfn = 0; // system frame number
int n;
uint8_t bch_payload[SRSLTE_BCH_PAYLOAD_LEN];
uint32_t sfn_offset;
float rssi_utra=0,rssi=0, rsrp=0, rsrq=0, snr=0;
cf_t *ce[SRSLTE_MAX_PORTS];
if (parse_args(&prog_args, argc, argv)) {
exit(-1);
}
printf("Opening RF device...\n");
if (srslte_rf_open(&rf, prog_args.rf_args)) {
fprintf(stderr, "Error opening rf\n");
exit(-1);
}
if (prog_args.rf_gain > 0) {
srslte_rf_set_rx_gain(&rf, prog_args.rf_gain);
} else {
printf("Starting AGC thread...\n");
if (srslte_rf_start_gain_thread(&rf, false)) {
fprintf(stderr, "Error opening rf\n");
exit(-1);
}
srslte_rf_set_rx_gain(&rf, 50);
}
sigset_t sigset;
sigemptyset(&sigset);
sigaddset(&sigset, SIGINT);
sigprocmask(SIG_UNBLOCK, &sigset, NULL);
signal(SIGINT, sig_int_handler);
srslte_rf_set_master_clock_rate(&rf, 30.72e6);
/* set receiver frequency */
srslte_rf_set_rx_freq(&rf, (double) prog_args.rf_freq);
srslte_rf_rx_wait_lo_locked(&rf);
printf("Tunning receiver to %.3f MHz\n", (double ) prog_args.rf_freq/1000000);
cell_detect_config.init_agc = (prog_args.rf_gain<0);
uint32_t ntrial=0;
do {
ret = rf_search_and_decode_mib(&rf, &cell_detect_config, prog_args.force_N_id_2, &cell);
if (ret < 0) {
fprintf(stderr, "Error searching for cell\n");
exit(-1);
} else if (ret == 0 && !go_exit) {
printf("Cell not found after %d trials. Trying again (Press Ctrl+C to exit)\n", ntrial++);
}
} while (ret == 0 && !go_exit);
if (go_exit) {
exit(0);
}
/* set sampling frequency */
int srate = srslte_sampling_freq_hz(cell.nof_prb);
if (srate != -1) {
if (srate < 10e6) {
srslte_rf_set_master_clock_rate(&rf, 4*srate);
} else {
srslte_rf_set_master_clock_rate(&rf, srate);
}
printf("Setting sampling rate %.2f MHz\n", (float) srate/1000000);
float srate_rf = srslte_rf_set_rx_srate(&rf, (double) srate);
if (srate_rf != srate) {
fprintf(stderr, "Could not set sampling rate\n");
exit(-1);
}
} else {
fprintf(stderr, "Invalid number of PRB %d\n", cell.nof_prb);
exit(-1);
}
INFO("Stopping RF and flushing buffer...\n",0);
srslte_rf_stop_rx_stream(&rf);
srslte_rf_flush_buffer(&rf);
if (srslte_ue_sync_init(&ue_sync, cell, srslte_rf_recv_wrapper, (void*) &rf)) {
fprintf(stderr, "Error initiating ue_sync\n");
return -1;
}
if (srslte_ue_dl_init(&ue_dl, cell)) {
fprintf(stderr, "Error initiating UE downlink processing module\n");
return -1;
}
if (srslte_ue_mib_init(&ue_mib, cell)) {
fprintf(stderr, "Error initaiting UE MIB decoder\n");
return -1;
}
/* Configure downlink receiver for the SI-RNTI since will be the only one we'll use */
srslte_ue_dl_set_rnti(&ue_dl, SRSLTE_SIRNTI);
/* Initialize subframe counter */
sf_cnt = 0;
if (srslte_ofdm_rx_init(&fft, cell.cp, cell.nof_prb)) {
fprintf(stderr, "Error initiating FFT\n");
return -1;
}
if (srslte_chest_dl_init(&chest, cell)) {
fprintf(stderr, "Error initiating channel estimator\n");
return -1;
}
int sf_re = SRSLTE_SF_LEN_RE(cell.nof_prb, cell.cp);
cf_t *sf_symbols = srslte_vec_malloc(sf_re * sizeof(cf_t));
for (int i=0;i<SRSLTE_MAX_PORTS;i++) {
ce[i] = srslte_vec_malloc(sizeof(cf_t) * sf_re);
}
srslte_rf_start_rx_stream(&rf);
float rx_gain_offset = 0;
/* Main loop */
while ((sf_cnt < prog_args.nof_subframes || prog_args.nof_subframes == -1) && !go_exit) {
ret = srslte_ue_sync_get_buffer(&ue_sync, &sf_buffer);
if (ret < 0) {
fprintf(stderr, "Error calling srslte_ue_sync_work()\n");
}
/* srslte_ue_sync_get_buffer returns 1 if successfully read 1 aligned subframe */
if (ret == 1) {
switch (state) {
case DECODE_MIB:
if (srslte_ue_sync_get_sfidx(&ue_sync) == 0) {
srslte_pbch_decode_reset(&ue_mib.pbch);
n = srslte_ue_mib_decode(&ue_mib, sf_buffer, bch_payload, NULL, &sfn_offset);
if (n < 0) {
fprintf(stderr, "Error decoding UE MIB\n");
return -1;
} else if (n == SRSLTE_UE_MIB_FOUND) {
srslte_pbch_mib_unpack(bch_payload, &cell, &sfn);
printf("Decoded MIB. SFN: %d, offset: %d\n", sfn, sfn_offset);
sfn = (sfn + sfn_offset)%1024;
state = DECODE_SIB;
}
}
break;
case DECODE_SIB:
/* We are looking for SI Blocks, search only in appropiate places */
if ((srslte_ue_sync_get_sfidx(&ue_sync) == 5 && (sfn%2)==0)) {
n = srslte_ue_dl_decode_rnti_rv(&ue_dl, sf_buffer, data, srslte_ue_sync_get_sfidx(&ue_sync), SRSLTE_SIRNTI,
((int) ceilf((float)3*(((sfn)/2)%4)/2))%4);
if (n < 0) {
fprintf(stderr, "Error decoding UE DL\n");fflush(stdout);
return -1;
} else if (n == 0) {
printf("CFO: %+6.4f KHz, SFO: %+6.4f Khz, NOI: %.2f, PDCCH-Det: %.3f\r",
srslte_ue_sync_get_cfo(&ue_sync)/1000, srslte_ue_sync_get_sfo(&ue_sync)/1000,
srslte_sch_average_noi(&ue_dl.pdsch.dl_sch),
(float) ue_dl.nof_detected/nof_trials);
nof_trials++;
} else {
printf("Decoded SIB1. Payload: ");
srslte_vec_fprint_byte(stdout, data, n/8);;
state = MEASURE;
}
}
break;
case MEASURE:
if (srslte_ue_sync_get_sfidx(&ue_sync) == 5) {
/* Run FFT for all subframe data */
srslte_ofdm_rx_sf(&fft, sf_buffer, sf_symbols);
srslte_chest_dl_estimate(&chest, sf_symbols, ce, srslte_ue_sync_get_sfidx(&ue_sync));
rssi = SRSLTE_VEC_EMA(srslte_vec_avg_power_cf(sf_buffer,SRSLTE_SF_LEN(srslte_symbol_sz(cell.nof_prb))),rssi,0.05);
rssi_utra = SRSLTE_VEC_EMA(srslte_chest_dl_get_rssi(&chest),rssi_utra,0.05);
rsrq = SRSLTE_VEC_EMA(srslte_chest_dl_get_rsrq(&chest),rsrq,0.05);
rsrp = SRSLTE_VEC_EMA(srslte_chest_dl_get_rsrp(&chest),rsrp,0.05);
snr = SRSLTE_VEC_EMA(srslte_chest_dl_get_snr(&chest),snr,0.05);
nframes++;
}
if ((nframes%100) == 0 || rx_gain_offset == 0) {
if (srslte_rf_has_rssi(&rf)) {
rx_gain_offset = 10*log10(rssi)-srslte_rf_get_rssi(&rf);
} else {
rx_gain_offset = srslte_rf_get_rx_gain(&rf);
}
}
// Plot and Printf
if ((nframes%10) == 0) {
printf("CFO: %+8.4f KHz, SFO: %+8.4f Khz, RSSI: %5.1f dBm, RSSI/ref-symbol: %+5.1f dBm, "
"RSRP: %+5.1f dBm, RSRQ: %5.1f dB, SNR: %5.1f dB\r",
srslte_ue_sync_get_cfo(&ue_sync)/1000, srslte_ue_sync_get_sfo(&ue_sync)/1000,
10*log10(rssi*1000) - rx_gain_offset,
10*log10(rssi_utra*1000)- rx_gain_offset,
10*log10(rsrp*1000) - rx_gain_offset,
10*log10(rsrq), 10*log10(snr));
if (srslte_verbose != SRSLTE_VERBOSE_NONE) {
printf("\n");
}
}
break;
}
if (srslte_ue_sync_get_sfidx(&ue_sync) == 9) {
sfn++;
if (sfn == 1024) {
sfn = 0;
}
}
} else if (ret == 0) {
printf("Finding PSS... Peak: %8.1f, FrameCnt: %d, State: %d\r",
srslte_sync_get_peak_value(&ue_sync.sfind),
ue_sync.frame_total_cnt, ue_sync.state);
}
sf_cnt++;
} // Main loop
srslte_ue_sync_free(&ue_sync);
srslte_rf_close(&rf);
printf("\nBye\n");
exit(0);
}
