/** * ti_gpio_detach - detach function for the driver * @dev: scm device handle * * Allocates and sets up the driver context, this simply entails creating a * bus mappings for the SCM register set. * * LOCKING: * None * * RETURNS: * Always returns 0 */ static int ti_gpio_detach(device_t dev) { struct ti_gpio_softc *sc = device_get_softc(dev); unsigned int i; KASSERT(mtx_initialized(&sc->sc_mtx), ("gpio mutex not initialized")); /* Disable all interrupts */ for (i = 0; i < MAX_GPIO_BANKS; i++) { if (sc->sc_mem_res[i] != NULL) ti_gpio_intr_clr(sc, i, 0xffffffff); } bus_generic_detach(dev); /* Release the memory and IRQ resources. */ ti_gpio_detach_intr(dev); bus_release_resources(dev, ti_gpio_irq_spec, sc->sc_irq_res); bus_release_resources(dev, ti_gpio_mem_spec, sc->sc_mem_res); TI_GPIO_LOCK_DESTROY(sc); return (0); }
static inline void ti_gpio_isrc_mask(struct ti_gpio_softc *sc, struct ti_gpio_irqsrc *tgi) { /* Writing a 0 has no effect. */ ti_gpio_intr_clr(sc, tgi->tgi_mask); }
/** * ti_gpio_detach - detach function for the driver * @dev: scm device handle * * Allocates and sets up the driver context, this simply entails creating a * bus mappings for the SCM register set. * * LOCKING: * None * * RETURNS: * Always returns 0 */ static int ti_gpio_detach(device_t dev) { struct ti_gpio_softc *sc = device_get_softc(dev); KASSERT(mtx_initialized(&sc->sc_mtx), ("gpio mutex not initialized")); /* Disable all interrupts */ if (sc->sc_mem_res != NULL) ti_gpio_intr_clr(sc, 0xffffffff); gpiobus_detach_bus(dev); if (sc->sc_isrcs != NULL) ti_gpio_pic_detach(sc); /* Release the memory and IRQ resources. */ if (sc->sc_irq_hdl) { bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_irq_hdl); } bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irq_rid, sc->sc_irq_res); bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_mem_rid, sc->sc_mem_res); TI_GPIO_LOCK_DESTROY(sc); return (0); }
static int ti_gpio_bank_init(device_t dev) { int pin; struct ti_gpio_softc *sc; uint32_t flags, reg_oe, reg_set, rev; clk_ident_t clk; sc = device_get_softc(dev); /* Enable the interface and functional clocks for the module. */ clk = ti_hwmods_get_clock(dev); if (clk == INVALID_CLK_IDENT) { device_printf(dev, "failed to get device id based on ti,hwmods\n"); return (EINVAL); } sc->sc_bank = clk - GPIO1_CLK + ti_first_gpio_bank(); ti_prcm_clk_enable(clk); /* * Read the revision number of the module. TI don't publish the * actual revision numbers, so instead the values have been * determined by experimentation. */ rev = ti_gpio_read_4(sc, TI_GPIO_REVISION); /* Check the revision. */ if (rev != ti_gpio_rev()) { device_printf(dev, "Warning: could not determine the revision " "of GPIO module (revision:0x%08x)\n", rev); return (EINVAL); } /* Disable interrupts for all pins. */ ti_gpio_intr_clr(sc, 0xffffffff); /* Init OE register based on pads configuration. */ reg_oe = 0xffffffff; reg_set = 0; for (pin = 0; pin < PINS_PER_BANK; pin++) { TI_GPIO_GET_FLAGS(dev, pin, &flags); if (flags & GPIO_PIN_OUTPUT) { reg_oe &= ~(1UL << pin); if (flags & GPIO_PIN_PULLUP) reg_set |= (1UL << pin); } } ti_gpio_write_4(sc, TI_GPIO_OE, reg_oe); if (reg_set) ti_gpio_write_4(sc, TI_GPIO_SETDATAOUT, reg_set); return (0); }
static void ti_gpio_mask_irq_internal(struct ti_gpio_softc *sc, int irq) { uint32_t reg, val; if (ti_gpio_valid_pin(sc, irq) != 0) return; TI_GPIO_LOCK(sc); ti_gpio_intr_clr(sc, TI_GPIO_MASK(irq)); reg = ti_gpio_intr_reg(sc, irq); if (reg != 0) { val = ti_gpio_read_4(sc, reg); val &= ~TI_GPIO_MASK(irq); ti_gpio_write_4(sc, reg, val); } TI_GPIO_UNLOCK(sc); }
static int ti_gpio_bank_init(device_t dev, int bank) { int pin; struct ti_gpio_softc *sc; uint32_t flags, reg_oe; sc = device_get_softc(dev); /* Enable the interface and functional clocks for the module. */ ti_prcm_clk_enable(GPIO0_CLK + FIRST_GPIO_BANK + bank); /* * Read the revision number of the module. TI don't publish the * actual revision numbers, so instead the values have been * determined by experimentation. */ sc->sc_revision[bank] = ti_gpio_read_4(sc, bank, TI_GPIO_REVISION); /* Check the revision. */ if (sc->sc_revision[bank] != TI_GPIO_REV) { device_printf(dev, "Warning: could not determine the revision " "of %u GPIO module (revision:0x%08x)\n", bank, sc->sc_revision[bank]); return (EINVAL); } /* Disable interrupts for all pins. */ ti_gpio_intr_clr(sc, bank, 0xffffffff); /* Init OE register based on pads configuration. */ reg_oe = 0xffffffff; for (pin = 0; pin < PINS_PER_BANK; pin++) { ti_scm_padconf_get_gpioflags(PINS_PER_BANK * bank + pin, &flags); if (flags & GPIO_PIN_OUTPUT) reg_oe &= ~(1UL << pin); } ti_gpio_write_4(sc, bank, TI_GPIO_OE, reg_oe); return (0); }