void CScrollShapeView::OnZoomed()
{
CRandomShapeView::OnZoomed();
Box2d rect;
// m_rcLimits: 极限范围对应的坐标范围, 像素
rect = m_shapes->getExtent() * m_graph->xf.modelToDisplay();
rect.inflate(1, 1);
rect.get(m_rcLimits);
// m_rcScrWnd: 当前窗口对应的坐标范围, 像素
rect = Box2d(m_graph->xf.getCenterW(),
m_graph->xf.getWidth() / m_graph->xf.getWorldToDisplayX(),
m_graph->xf.getHeight() / m_graph->xf.getWorldToDisplayY());
rect *= m_graph->xf.worldToDisplay();
rect.get(m_rcScrWnd);
// 以m_rcLimits左上角为原点调整m_rcScrWnd和m_rcLimits
::OffsetRect(&m_rcScrWnd, -m_rcLimits.left, -m_rcLimits.top);
::OffsetRect(&m_rcLimits, -m_rcLimits.left, -m_rcLimits.top);
// 避免m_rcScrWnd部分超出m_rcLimits
::UnionRect(&m_rcLimits, &m_rcLimits, &m_rcScrWnd);
SCROLLINFO si;
si.cbSize = sizeof(si);
si.fMask = SIF_RANGE | SIF_PAGE | SIF_POS;
si.nMin = 0;
if (m_rcLimits.right - m_rcLimits.left > m_rcScrWnd.right - m_rcScrWnd.left)
{
si.nMax = max(1, m_rcLimits.right - m_rcLimits.left);
si.nPage = m_rcScrWnd.right - m_rcScrWnd.left;
si.nPos = m_rcScrWnd.left;
::EnableScrollBar(m_hWnd, SB_HORZ, ESB_ENABLE_BOTH);
::SetScrollInfo(m_hWnd, SB_HORZ, &si, TRUE);
}
else
{
::EnableScrollBar(m_hWnd, SB_HORZ, ESB_DISABLE_BOTH);
}
if (m_rcLimits.bottom - m_rcLimits.top > m_rcScrWnd.bottom - m_rcScrWnd.top)
{
si.nMax = max(1, m_rcLimits.bottom - m_rcLimits.top);
si.nPage = m_rcScrWnd.bottom - m_rcScrWnd.top;
si.nPos = m_rcScrWnd.top;
::EnableScrollBar(m_hWnd, SB_VERT, ESB_ENABLE_BOTH);
::SetScrollInfo(m_hWnd, SB_VERT, &si, TRUE);
}
else
{
::EnableScrollBar(m_hWnd, SB_VERT, ESB_DISABLE_BOTH);
}
}
bool GiGraphics::setClipWorld(const Box2d& rectWorld)
{
bool ret = false;
if (isDrawing() && !rectWorld.isEmpty())
{
Box2d box (rectWorld * xf().worldToDisplay());
box.intersectWith(Box2d(m_impl->clipBox0));
if (!box.isEmpty(Tol(1, 0)))
{
if (box != Box2d(m_impl->clipBox))
{
box.get(m_impl->clipBox);
m_impl->rectDraw = box;
m_impl->rectDraw.inflate(GiGraphicsImpl::CLIP_INFLATE);
m_impl->rectDrawM = m_impl->rectDraw * xf().displayToModel();
m_impl->rectDrawW = m_impl->rectDrawM * xf().modelToWorld();
SafeCall(m_impl->canvas, _clipBoxChanged(m_impl->clipBox));
}
ret = true;
}
}
return ret;
}
bool GiGraphics::setClipBox(const RECT_2D& rc)
{
if (m_impl->drawRefcnt < 1)
return false;
bool ret = false;
Box2d rect;
if (!rect.intersectWith(Box2d(rc), Box2d(m_impl->clipBox0)).isEmpty())
{
if (rect != Box2d(m_impl->clipBox))
{
rect.get(m_impl->clipBox);
m_impl->rectDraw.set(Box2d(rc));
m_impl->rectDraw.inflate(GiGraphicsImpl::CLIP_INFLATE);
m_impl->rectDrawM = m_impl->rectDraw * xf().displayToModel();
m_impl->rectDrawW = m_impl->rectDrawM * xf().modelToWorld();
SafeCall(m_impl->canvas, clipRect(m_impl->clipBox.left, m_impl->clipBox.top,
m_impl->clipBox.width(),
m_impl->clipBox.height()));
}
ret = true;
}
return ret;
}
bool GiCanvasGdipImpl::drawImage(G::Bitmap* pBmp, const Box2d& rectW, bool fast)
{
RECT_2D rc, rcDraw, rcFrom;
Box2d rect;
float width = (float)pBmp->GetWidth();
float height = (float)pBmp->GetHeight();
// rc: 整个图像对应的显示坐标区域
(rectW * gs()->xf().worldToDisplay()).get(rc);
// rcDraw: 图像经剪裁后的可显示部分
gs()->getClipBox(rcDraw);
if (rect.intersectWith(Box2d(rc), Box2d(rcDraw)).isEmpty())
return false;
rect.get(rcDraw);
// rcFrom: rcDraw在原始图像上对应的图像范围
rcFrom.left = (rcDraw.left - rc.left) * width / (rc.right - rc.left);
rcFrom.top = (rcDraw.top - rc.top) * height / (rc.bottom - rc.top);
rcFrom.right = (rcDraw.right - rc.left) * width / (rc.right - rc.left);
rcFrom.bottom = (rcDraw.bottom - rc.top) * height / (rc.bottom - rc.top);
// 根据rectW正负决定是否颠倒显示图像
if (rectW.xmin > rectW.xmax)
mgSwap(rcDraw.left, rcDraw.right);
if (rectW.ymin > rectW.ymax)
mgSwap(rcDraw.top, rcDraw.bottom);
G::InterpolationMode nOldMode = getDrawGs()->GetInterpolationMode();
getDrawGs()->SetInterpolationMode( (!fast || gs()->isPrint())
? G::InterpolationModeBilinear : G::InterpolationModeLowQuality);
G::Status ret = getDrawGs()->DrawImage(pBmp,
G::RectF(rcDraw.left, rcDraw.top,
rcDraw.right - rcDraw.left,
rcDraw.bottom - rcDraw.top),
rcFrom.left, rcFrom.top,
rcFrom.right - rcFrom.left,
rcFrom.bottom - rcFrom.top,
G::UnitPixel);
getDrawGs()->SetInterpolationMode(nOldMode);
return G::Ok == ret;
}
