void GrGLGeometryProcessor::setupColorPassThrough(GrGLGPBuilder* pb,
GrGPInput inputType,
const char* outputName,
const GrGeometryProcessor::GrAttribute* colorAttr,
UniformHandle* colorUniform) {
GrGLGPFragmentBuilder* fs = pb->getFragmentShaderBuilder();
if (kUniform_GrGPInput == inputType) {
SkASSERT(colorUniform);
const char* stagedLocalVarName;
*colorUniform = pb->addUniform(GrGLProgramBuilder::kFragment_Visibility,
kVec4f_GrSLType,
kDefault_GrSLPrecision,
"Color",
&stagedLocalVarName);
fs->codeAppendf("%s = %s;", outputName, stagedLocalVarName);
} else if (kAttribute_GrGPInput == inputType) {
SkASSERT(colorAttr);
pb->addPassThroughAttribute(colorAttr, outputName);
} else if (kAllOnes_GrGPInput == inputType) {
fs->codeAppendf("%s = vec4(1);", outputName);
}
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override{
const GrBitmapTextGeoProc& cte = args.fGP.cast<GrBitmapTextGeoProc>();
const BitmapTextBatchTracker& local = args.fBT.cast<BitmapTextBatchTracker>();
GrGLGPBuilder* pb = args.fPB;
GrGLVertexBuilder* vsBuilder = pb->getVertexShaderBuilder();
// emit attributes
vsBuilder->emitAttributes(cte);
GrGLVertToFrag v(kVec2f_GrSLType);
pb->addVarying("TextureCoords", &v);
// this is only used with text, so our texture bounds always match the glyph atlas
if (cte.maskFormat() == kA8_GrMaskFormat) {
vsBuilder->codeAppendf("%s = vec2(" GR_FONT_ATLAS_A8_RECIP_WIDTH ", "
GR_FONT_ATLAS_RECIP_HEIGHT ")*%s;", v.vsOut(),
cte.inTextureCoords()->fName);
} else {
vsBuilder->codeAppendf("%s = vec2(" GR_FONT_ATLAS_RECIP_WIDTH ", "
GR_FONT_ATLAS_RECIP_HEIGHT ")*%s;", v.vsOut(),
cte.inTextureCoords()->fName);
}
// Setup pass through color
this->setupColorPassThrough(pb, local.fInputColorType, args.fOutputColor, cte.inColor(),
&fColorUniform);
// Setup position
this->setupPosition(pb, gpArgs, cte.inPosition()->fName, cte.viewMatrix());
// emit transforms
this->emitTransforms(args.fPB, gpArgs->fPositionVar, cte.inPosition()->fName,
cte.localMatrix(), args.fTransformsIn, args.fTransformsOut);
GrGLGPFragmentBuilder* fsBuilder = pb->getFragmentShaderBuilder();
if (cte.maskFormat() == kARGB_GrMaskFormat) {
fsBuilder->codeAppendf("%s = ", args.fOutputColor);
fsBuilder->appendTextureLookupAndModulate(args.fOutputColor,
args.fSamplers[0],
v.fsIn(),
kVec2f_GrSLType);
fsBuilder->codeAppend(";");
fsBuilder->codeAppendf("%s = vec4(1);", args.fOutputCoverage);
} else {
fsBuilder->codeAppendf("%s = ", args.fOutputCoverage);
fsBuilder->appendTextureLookup(args.fSamplers[0], v.fsIn(), kVec2f_GrSLType);
fsBuilder->codeAppend(";");
}
}
void GrGLPathProcessor::emitCode(EmitArgs& args) {
GrGLGPBuilder* pb = args.fPB;
GrGLGPFragmentBuilder* fs = args.fPB->getFragmentShaderBuilder();
const PathBatchTracker& local = args.fBT.cast<PathBatchTracker>();
// emit transforms
this->emitTransforms(args.fPB, args.fTransformsIn, args.fTransformsOut);
// Setup uniform color
if (kUniform_GrGPInput == local.fInputColorType) {
const char* stagedLocalVarName;
fColorUniform = pb->addUniform(GrGLProgramBuilder::kFragment_Visibility,
kVec4f_GrSLType,
kDefault_GrSLPrecision,
"Color",
&stagedLocalVarName);
fs->codeAppendf("%s = %s;", args.fOutputColor, stagedLocalVarName);
}
// setup constant solid coverage
if (kAllOnes_GrGPInput == local.fInputCoverageType) {
fs->codeAppendf("%s = vec4(1);", args.fOutputCoverage);
}
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override{
const GrDistanceFieldLCDTextureEffect& dfTexEffect =
args.fGP.cast<GrDistanceFieldLCDTextureEffect>();
const DistanceFieldLCDBatchTracker& local = args.fBT.cast<DistanceFieldLCDBatchTracker>();
GrGLGPBuilder* pb = args.fPB;
GrGLVertexBuilder* vsBuilder = args.fPB->getVertexShaderBuilder();
// emit attributes
vsBuilder->emitAttributes(dfTexEffect);
GrGLVertToFrag st(kVec2f_GrSLType);
args.fPB->addVarying("IntTextureCoords", &st, kHigh_GrSLPrecision);
vsBuilder->codeAppendf("%s = %s;", st.vsOut(), dfTexEffect.inTextureCoords()->fName);
GrGLVertToFrag uv(kVec2f_GrSLType);
args.fPB->addVarying("TextureCoords", &uv, kHigh_GrSLPrecision);
// this is only used with text, so our texture bounds always match the glyph atlas
vsBuilder->codeAppendf("%s = vec2(" GR_FONT_ATLAS_A8_RECIP_WIDTH ", "
GR_FONT_ATLAS_RECIP_HEIGHT ")*%s;", uv.vsOut(),
dfTexEffect.inTextureCoords()->fName);
// setup pass through color
this->setupColorPassThrough(pb, local.fInputColorType, args.fOutputColor, NULL,
&fColorUniform);
// Setup position
this->setupPosition(pb, gpArgs, dfTexEffect.inPosition()->fName, dfTexEffect.viewMatrix());
// emit transforms
this->emitTransforms(args.fPB, gpArgs->fPositionVar, dfTexEffect.inPosition()->fName,
dfTexEffect.localMatrix(), args.fTransformsIn, args.fTransformsOut);
GrGLGPFragmentBuilder* fsBuilder = args.fPB->getFragmentShaderBuilder();
SkAssertResult(fsBuilder->enableFeature(
GrGLFragmentShaderBuilder::kStandardDerivatives_GLSLFeature));
// create LCD offset adjusted by inverse of transform
// Use highp to work around aliasing issues
fsBuilder->codeAppend(GrGLShaderVar::PrecisionString(kHigh_GrSLPrecision,
pb->ctxInfo().standard()));
fsBuilder->codeAppendf("vec2 uv = %s;\n", uv.fsIn());
fsBuilder->codeAppend(GrGLShaderVar::PrecisionString(kHigh_GrSLPrecision,
pb->ctxInfo().standard()));
fsBuilder->codeAppendf("vec2 st = %s;\n", st.fsIn());
bool isUniformScale = !!(dfTexEffect.getFlags() & kUniformScale_DistanceFieldEffectMask);
if (dfTexEffect.getFlags() & kBGR_DistanceFieldEffectFlag) {
fsBuilder->codeAppend("float delta = -" GR_FONT_ATLAS_LCD_DELTA ";\n");
} else {
fsBuilder->codeAppend("float delta = " GR_FONT_ATLAS_LCD_DELTA ";\n");
}
if (isUniformScale) {
fsBuilder->codeAppend("\tfloat dx = dFdx(st.x);\n");
fsBuilder->codeAppend("\tvec2 offset = vec2(dx*delta, 0.0);\n");
} else {
fsBuilder->codeAppend("\tvec2 Jdx = dFdx(st);\n");
fsBuilder->codeAppend("\tvec2 Jdy = dFdy(st);\n");
fsBuilder->codeAppend("\tvec2 offset = delta*Jdx;\n");
}
// green is distance to uv center
fsBuilder->codeAppend("\tvec4 texColor = ");
fsBuilder->appendTextureLookup(args.fSamplers[0], "uv", kVec2f_GrSLType);
fsBuilder->codeAppend(";\n");
fsBuilder->codeAppend("\tvec3 distance;\n");
fsBuilder->codeAppend("\tdistance.y = texColor.r;\n");
// red is distance to left offset
fsBuilder->codeAppend("\tvec2 uv_adjusted = uv - offset;\n");
fsBuilder->codeAppend("\ttexColor = ");
fsBuilder->appendTextureLookup(args.fSamplers[0], "uv_adjusted", kVec2f_GrSLType);
fsBuilder->codeAppend(";\n");
fsBuilder->codeAppend("\tdistance.x = texColor.r;\n");
// blue is distance to right offset
fsBuilder->codeAppend("\tuv_adjusted = uv + offset;\n");
fsBuilder->codeAppend("\ttexColor = ");
fsBuilder->appendTextureLookup(args.fSamplers[0], "uv_adjusted", kVec2f_GrSLType);
fsBuilder->codeAppend(";\n");
fsBuilder->codeAppend("\tdistance.z = texColor.r;\n");
fsBuilder->codeAppend("\tdistance = "
"vec3(" SK_DistanceFieldMultiplier ")*(distance - vec3(" SK_DistanceFieldThreshold"));");
// adjust width based on gamma
const char* distanceAdjustUniName = NULL;
fDistanceAdjustUni = args.fPB->addUniform(GrGLProgramBuilder::kFragment_Visibility,
kVec3f_GrSLType, kDefault_GrSLPrecision,
"DistanceAdjust", &distanceAdjustUniName);
fsBuilder->codeAppendf("distance -= %s;", distanceAdjustUniName);
// To be strictly correct, we should compute the anti-aliasing factor separately
// for each color component. However, this is only important when using perspective
// transformations, and even then using a single factor seems like a reasonable
// trade-off between quality and speed.
fsBuilder->codeAppend("float afwidth;");
if (isUniformScale) {
// For uniform scale, we adjust for the effect of the transformation on the distance
// by using the length of the gradient of the texture coordinates. We use st coordinates
// to ensure we're mapping 1:1 from texel space to pixel space.
// this gives us a smooth step across approximately one fragment
fsBuilder->codeAppend("afwidth = abs(" SK_DistanceFieldAAFactor "*dx);");
} else {
// For general transforms, to determine the amount of correction we multiply a unit
// vector pointing along the SDF gradient direction by the Jacobian of the st coords
// (which is the inverse transform for this fragment) and take the length of the result.
fsBuilder->codeAppend("vec2 dist_grad = vec2(dFdx(distance.r), dFdy(distance.r));");
// the length of the gradient may be 0, so we need to check for this
// this also compensates for the Adreno, which likes to drop tiles on division by 0
fsBuilder->codeAppend("float dg_len2 = dot(dist_grad, dist_grad);");
fsBuilder->codeAppend("if (dg_len2 < 0.0001) {");
fsBuilder->codeAppend("dist_grad = vec2(0.7071, 0.7071);");
fsBuilder->codeAppend("} else {");
fsBuilder->codeAppend("dist_grad = dist_grad*inversesqrt(dg_len2);");
fsBuilder->codeAppend("}");
fsBuilder->codeAppend("vec2 grad = vec2(dist_grad.x*Jdx.x + dist_grad.y*Jdy.x,");
fsBuilder->codeAppend(" dist_grad.x*Jdx.y + dist_grad.y*Jdy.y);");
// this gives us a smooth step across approximately one fragment
fsBuilder->codeAppend("afwidth = " SK_DistanceFieldAAFactor "*length(grad);");
}
fsBuilder->codeAppend(
"vec4 val = vec4(smoothstep(vec3(-afwidth), vec3(afwidth), distance), 1.0);");
fsBuilder->codeAppendf("%s = vec4(val);", args.fOutputCoverage);
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override{
const GrDistanceFieldTextureEffect& dfTexEffect =
args.fGP.cast<GrDistanceFieldTextureEffect>();
const DistanceFieldBatchTracker& local = args.fBT.cast<DistanceFieldBatchTracker>();
GrGLGPBuilder* pb = args.fPB;
GrGLGPFragmentBuilder* fsBuilder = args.fPB->getFragmentShaderBuilder();
SkAssertResult(fsBuilder->enableFeature(
GrGLFragmentShaderBuilder::kStandardDerivatives_GLSLFeature));
GrGLVertexBuilder* vsBuilder = args.fPB->getVertexShaderBuilder();
// emit attributes
vsBuilder->emitAttributes(dfTexEffect);
GrGLVertToFrag st(kVec2f_GrSLType);
args.fPB->addVarying("IntTextureCoords", &st, kHigh_GrSLPrecision);
vsBuilder->codeAppendf("%s = %s;", st.vsOut(), dfTexEffect.inTextureCoords()->fName);
GrGLVertToFrag uv(kVec2f_GrSLType);
args.fPB->addVarying("TextureCoords", &uv, kHigh_GrSLPrecision);
// this is only used with text, so our texture bounds always match the glyph atlas
vsBuilder->codeAppendf("%s = vec2(" GR_FONT_ATLAS_A8_RECIP_WIDTH ", "
GR_FONT_ATLAS_RECIP_HEIGHT ")*%s;", uv.vsOut(),
dfTexEffect.inTextureCoords()->fName);
#ifdef SK_GAMMA_APPLY_TO_A8
// adjust based on gamma
const char* distanceAdjustUniName = NULL;
// width, height, 1/(3*width)
fDistanceAdjustUni = args.fPB->addUniform(GrGLProgramBuilder::kFragment_Visibility,
kFloat_GrSLType, kDefault_GrSLPrecision,
"DistanceAdjust", &distanceAdjustUniName);
#endif
// Setup pass through color
this->setupColorPassThrough(pb, local.fInputColorType, args.fOutputColor,
dfTexEffect.inColor(), &fColorUniform);
// Setup position
this->setupPosition(pb, gpArgs, dfTexEffect.inPosition()->fName, dfTexEffect.viewMatrix());
// emit transforms
this->emitTransforms(args.fPB, gpArgs->fPositionVar, dfTexEffect.inPosition()->fName,
dfTexEffect.localMatrix(), args.fTransformsIn, args.fTransformsOut);
// Use highp to work around aliasing issues
fsBuilder->codeAppend(GrGLShaderVar::PrecisionString(kHigh_GrSLPrecision,
pb->ctxInfo().standard()));
fsBuilder->codeAppendf("vec2 uv = %s;\n", uv.fsIn());
fsBuilder->codeAppend("\tfloat texColor = ");
fsBuilder->appendTextureLookup(args.fSamplers[0],
"uv",
kVec2f_GrSLType);
fsBuilder->codeAppend(".r;\n");
fsBuilder->codeAppend("\tfloat distance = "
SK_DistanceFieldMultiplier "*(texColor - " SK_DistanceFieldThreshold ");");
#ifdef SK_GAMMA_APPLY_TO_A8
// adjust width based on gamma
fsBuilder->codeAppendf("distance -= %s;", distanceAdjustUniName);
#endif
fsBuilder->codeAppend(GrGLShaderVar::PrecisionString(kHigh_GrSLPrecision,
pb->ctxInfo().standard()));
fsBuilder->codeAppendf("vec2 st = %s;", st.fsIn());
fsBuilder->codeAppend("float afwidth;");
if (dfTexEffect.getFlags() & kSimilarity_DistanceFieldEffectFlag) {
// For uniform scale, we adjust for the effect of the transformation on the distance
// by using the length of the gradient of the texture coordinates. We use st coordinates
// to ensure we're mapping 1:1 from texel space to pixel space.
// this gives us a smooth step across approximately one fragment
fsBuilder->codeAppend("afwidth = abs(" SK_DistanceFieldAAFactor "*dFdx(st.x));");
} else {
// For general transforms, to determine the amount of correction we multiply a unit
// vector pointing along the SDF gradient direction by the Jacobian of the st coords
// (which is the inverse transform for this fragment) and take the length of the result.
fsBuilder->codeAppend("vec2 dist_grad = vec2(dFdx(distance), dFdy(distance));");
// the length of the gradient may be 0, so we need to check for this
// this also compensates for the Adreno, which likes to drop tiles on division by 0
fsBuilder->codeAppend("float dg_len2 = dot(dist_grad, dist_grad);");
fsBuilder->codeAppend("if (dg_len2 < 0.0001) {");
fsBuilder->codeAppend("dist_grad = vec2(0.7071, 0.7071);");
fsBuilder->codeAppend("} else {");
fsBuilder->codeAppend("dist_grad = dist_grad*inversesqrt(dg_len2);");
fsBuilder->codeAppend("}");
fsBuilder->codeAppend("vec2 Jdx = dFdx(st);");
fsBuilder->codeAppend("vec2 Jdy = dFdy(st);");
fsBuilder->codeAppend("vec2 grad = vec2(dist_grad.x*Jdx.x + dist_grad.y*Jdy.x,");
fsBuilder->codeAppend(" dist_grad.x*Jdx.y + dist_grad.y*Jdy.y);");
// this gives us a smooth step across approximately one fragment
fsBuilder->codeAppend("afwidth = " SK_DistanceFieldAAFactor "*length(grad);");
}
fsBuilder->codeAppend("float val = smoothstep(-afwidth, afwidth, distance);");
fsBuilder->codeAppendf("%s = vec4(val);", args.fOutputCoverage);
}
void onEmitCode(EmitArgs& args, GrGPArgs* gpArgs) override {
const QuadEdgeEffect& qe = args.fGP.cast<QuadEdgeEffect>();
GrGLGPBuilder* pb = args.fPB;
GrGLVertexBuilder* vsBuilder = pb->getVertexShaderBuilder();
// emit attributes
vsBuilder->emitAttributes(qe);
GrGLVertToFrag v(kVec4f_GrSLType);
args.fPB->addVarying("QuadEdge", &v);
vsBuilder->codeAppendf("%s = %s;", v.vsOut(), qe.inQuadEdge()->fName);
const BatchTracker& local = args.fBT.cast<BatchTracker>();
// Setup pass through color
this->setupColorPassThrough(pb, local.fInputColorType, args.fOutputColor, NULL,
&fColorUniform);
// Setup position
this->setupPosition(pb, gpArgs, qe.inPosition()->fName, qe.viewMatrix());
// emit transforms
this->emitTransforms(args.fPB, gpArgs->fPositionVar, qe.inPosition()->fName,
qe.localMatrix(), args.fTransformsIn, args.fTransformsOut);
GrGLGPFragmentBuilder* fsBuilder = args.fPB->getFragmentShaderBuilder();
SkAssertResult(fsBuilder->enableFeature(
GrGLFragmentShaderBuilder::kStandardDerivatives_GLSLFeature));
fsBuilder->codeAppendf("float edgeAlpha;");
// keep the derivative instructions outside the conditional
fsBuilder->codeAppendf("vec2 duvdx = dFdx(%s.xy);", v.fsIn());
fsBuilder->codeAppendf("vec2 duvdy = dFdy(%s.xy);", v.fsIn());
fsBuilder->codeAppendf("if (%s.z > 0.0 && %s.w > 0.0) {", v.fsIn(), v.fsIn());
// today we know z and w are in device space. We could use derivatives
fsBuilder->codeAppendf("edgeAlpha = min(min(%s.z, %s.w) + 0.5, 1.0);", v.fsIn(),
v.fsIn());
fsBuilder->codeAppendf ("} else {");
fsBuilder->codeAppendf("vec2 gF = vec2(2.0*%s.x*duvdx.x - duvdx.y,"
" 2.0*%s.x*duvdy.x - duvdy.y);",
v.fsIn(), v.fsIn());
fsBuilder->codeAppendf("edgeAlpha = (%s.x*%s.x - %s.y);", v.fsIn(), v.fsIn(),
v.fsIn());
fsBuilder->codeAppendf("edgeAlpha = "
"clamp(0.5 - edgeAlpha / length(gF), 0.0, 1.0);}");
fsBuilder->codeAppendf("%s = vec4(edgeAlpha);", args.fOutputCoverage);
}
