ContinuityMassElemSuppAlg<AlgTraits>::ContinuityMassElemSuppAlg(
Realm &realm,
ElemDataRequests& dataPreReqs,
const bool lumpedMass)
: SupplementalAlgorithm(realm),
densityNm1_(NULL),
densityN_(NULL),
densityNp1_(NULL),
coordinates_(NULL),
dt_(0.0),
gamma1_(0.0),
gamma2_(0.0),
gamma3_(0.0),
lumpedMass_(lumpedMass),
ipNodeMap_(realm.get_volume_master_element(AlgTraits::topo_)->ipNodeMap())
{
// save off fields; shove state N into Nm1 if this is BE
stk::mesh::MetaData & meta_data = realm_.meta_data();
ScalarFieldType *density = meta_data.get_field<ScalarFieldType>(stk::topology::NODE_RANK, "density");
densityNm1_ = realm_.number_of_states() == 2 ? &(density->field_of_state(stk::mesh::StateN)) : &(density->field_of_state(stk::mesh::StateNM1));
densityN_ = &(density->field_of_state(stk::mesh::StateN));
densityNp1_ = &(density->field_of_state(stk::mesh::StateNP1));
coordinates_ = meta_data.get_field<VectorFieldType>(stk::topology::NODE_RANK, realm_.get_coordinates_name());
MasterElement *meSCV = realm.get_volume_master_element(AlgTraits::topo_);
// compute shape function
if ( lumpedMass_ )
meSCV->shifted_shape_fcn(&v_shape_function_(0,0));
else
meSCV->shape_fcn(&v_shape_function_(0,0));
// add master elements
dataPreReqs.add_cvfem_volume_me(meSCV);
// fields and data
dataPreReqs.add_gathered_nodal_field(*coordinates_, AlgTraits::nDim_);
dataPreReqs.add_gathered_nodal_field(*densityNm1_, 1);
dataPreReqs.add_gathered_nodal_field(*densityN_, 1);
dataPreReqs.add_gathered_nodal_field(*densityNp1_, 1);
dataPreReqs.add_master_element_call(SCV_VOLUME);
}
ScalarAdvDiffElemKernel<AlgTraits>::ScalarAdvDiffElemKernel(
const stk::mesh::BulkData& bulkData,
const SolutionOptions& solnOpts,
ScalarFieldType* scalarQ,
ScalarFieldType* diffFluxCoeff,
ElemDataRequests& dataPreReqs)
: Kernel(),
scalarQ_(scalarQ),
diffFluxCoeff_(diffFluxCoeff),
lrscv_(sierra::nalu::MasterElementRepo::get_surface_master_element(AlgTraits::topo_)->adjacentNodes()),
shiftedGradOp_(solnOpts.get_shifted_grad_op(scalarQ->name()))
{
// Save of required fields
const stk::mesh::MetaData& metaData = bulkData.mesh_meta_data();
coordinates_ = metaData.get_field<VectorFieldType>(
stk::topology::NODE_RANK, solnOpts.get_coordinates_name());
massFlowRate_ = metaData.get_field<GenericFieldType>(
stk::topology::ELEMENT_RANK, "mass_flow_rate_scs");
MasterElement *meSCS = sierra::nalu::MasterElementRepo::get_surface_master_element(AlgTraits::topo_);
get_scs_shape_fn_data<AlgTraits>([&](double* ptr){meSCS->shape_fcn(ptr);}, v_shape_function_);
const bool skewSymmetric = solnOpts.get_skew_symmetric(scalarQ->name());
get_scs_shape_fn_data<AlgTraits>([&](double* ptr){skewSymmetric ? meSCS->shifted_shape_fcn(ptr) : meSCS->shape_fcn(ptr);},
v_adv_shape_function_);
dataPreReqs.add_cvfem_surface_me(meSCS);
// fields and data
dataPreReqs.add_coordinates_field(*coordinates_, AlgTraits::nDim_, CURRENT_COORDINATES);
dataPreReqs.add_gathered_nodal_field(*scalarQ_, 1);
dataPreReqs.add_gathered_nodal_field(*diffFluxCoeff_, 1);
dataPreReqs.add_element_field(*massFlowRate_, AlgTraits::numScsIp_);
dataPreReqs.add_master_element_call(SCS_AREAV, CURRENT_COORDINATES);
if ( shiftedGradOp_ )
dataPreReqs.add_master_element_call(SCS_SHIFTED_GRAD_OP, CURRENT_COORDINATES);
else
dataPreReqs.add_master_element_call(SCS_GRAD_OP, CURRENT_COORDINATES);
}
//--------------------------------------------------------------------------
//-------- execute ---------------------------------------------------------
//--------------------------------------------------------------------------
void
AssembleContinuityElemSolverAlgorithm::execute()
{
stk::mesh::MetaData & meta_data = realm_.meta_data();
const int nDim = meta_data.spatial_dimension();
// time step
const double dt = realm_.get_time_step();
const double gamma1 = realm_.get_gamma1();
const double projTimeScale = dt/gamma1;
// deal with interpolation procedure
const double interpTogether = realm_.get_mdot_interp();
const double om_interpTogether = 1.0-interpTogether;
// space for LHS/RHS; nodesPerElem*nodesPerElem and nodesPerElem
std::vector<double> lhs;
std::vector<double> rhs;
std::vector<stk::mesh::Entity> connected_nodes;
// supplemental algorithm setup
const size_t supplementalAlgSize = supplementalAlg_.size();
for ( size_t i = 0; i < supplementalAlgSize; ++i )
supplementalAlg_[i]->setup();
// nodal fields to gather
std::vector<double> ws_vrtm;
std::vector<double> ws_Gpdx;
std::vector<double> ws_coordinates;
std::vector<double> ws_pressure;
std::vector<double> ws_density;
// geometry related to populate
std::vector<double> ws_scs_areav;
std::vector<double> ws_dndx;
std::vector<double> ws_dndx_lhs;
std::vector<double> ws_deriv;
std::vector<double> ws_det_j;
std::vector<double> ws_shape_function;
// integration point data that depends on size
std::vector<double> uIp(nDim);
std::vector<double> rho_uIp(nDim);
std::vector<double> GpdxIp(nDim);
std::vector<double> dpdxIp(nDim);
// pointers to everyone...
double *p_uIp = &uIp[0];
double *p_rho_uIp = &rho_uIp[0];
double *p_GpdxIp = &GpdxIp[0];
double *p_dpdxIp = &dpdxIp[0];
// deal with state
ScalarFieldType &densityNp1 = density_->field_of_state(stk::mesh::StateNP1);
// define some common selectors
stk::mesh::Selector s_locally_owned_union = meta_data.locally_owned_part()
& stk::mesh::selectUnion(partVec_)
& !(realm_.get_inactive_selector());
stk::mesh::BucketVector const& elem_buckets =
realm_.get_buckets( stk::topology::ELEMENT_RANK, s_locally_owned_union );
for ( stk::mesh::BucketVector::const_iterator ib = elem_buckets.begin();
ib != elem_buckets.end() ; ++ib ) {
stk::mesh::Bucket & b = **ib ;
const stk::mesh::Bucket::size_type length = b.size();
// extract master element
MasterElement *meSCS = realm_.get_surface_master_element(b.topology());
MasterElement *meSCV = realm_.get_volume_master_element(b.topology());
// extract master element specifics
const int nodesPerElement = meSCS->nodesPerElement_;
const int numScsIp = meSCS->numIntPoints_;
const int *lrscv = meSCS->adjacentNodes();
// resize some things; matrix related
const int lhsSize = nodesPerElement*nodesPerElement;
const int rhsSize = nodesPerElement;
lhs.resize(lhsSize);
rhs.resize(rhsSize);
connected_nodes.resize(nodesPerElement);
// algorithm related
ws_vrtm.resize(nodesPerElement*nDim);
ws_Gpdx.resize(nodesPerElement*nDim);
ws_coordinates.resize(nodesPerElement*nDim);
ws_pressure.resize(nodesPerElement);
ws_density.resize(nodesPerElement);
ws_scs_areav.resize(numScsIp*nDim);
ws_dndx.resize(nDim*numScsIp*nodesPerElement);
ws_dndx_lhs.resize(nDim*numScsIp*nodesPerElement);
ws_deriv.resize(nDim*numScsIp*nodesPerElement);
ws_det_j.resize(numScsIp);
ws_shape_function.resize(numScsIp*nodesPerElement);
// pointers
double *p_lhs = &lhs[0];
double *p_rhs = &rhs[0];
double *p_vrtm = &ws_vrtm[0];
double *p_Gpdx = &ws_Gpdx[0];
double *p_coordinates = &ws_coordinates[0];
double *p_pressure = &ws_pressure[0];
double *p_density = &ws_density[0];
double *p_scs_areav = &ws_scs_areav[0];
double *p_dndx = &ws_dndx[0];
double *p_dndx_lhs = reducedSensitivities_ ? &ws_dndx_lhs[0] : &ws_dndx[0];
double *p_shape_function = &ws_shape_function[0];
if ( shiftMdot_)
meSCS->shifted_shape_fcn(&p_shape_function[0]);
else
meSCS->shape_fcn(&p_shape_function[0]);
// resize possible supplemental element alg
for ( size_t i = 0; i < supplementalAlgSize; ++i )
supplementalAlg_[i]->elem_resize(meSCS, meSCV);
for ( stk::mesh::Bucket::size_type k = 0 ; k < length ; ++k ) {
// get elem
stk::mesh::Entity elem = b[k];
// zero lhs/rhs
for ( int p = 0; p < lhsSize; ++p )
p_lhs[p] = 0.0;
for ( int p = 0; p < rhsSize; ++p )
p_rhs[p] = 0.0;
//===============================================
// gather nodal data; this is how we do it now..
//===============================================
stk::mesh::Entity const * node_rels = b.begin_nodes(k);
int num_nodes = b.num_nodes(k);
// sanity check on num nodes
ThrowAssert( num_nodes == nodesPerElement );
for ( int ni = 0; ni < num_nodes; ++ni ) {
stk::mesh::Entity node = node_rels[ni];
// set connected nodes
connected_nodes[ni] = node;
// pointers to real data
const double * Gjp = stk::mesh::field_data(*Gpdx_, node );
const double * coords = stk::mesh::field_data(*coordinates_, node );
const double * vrtm = stk::mesh::field_data(*velocityRTM_, node );
// gather scalars
p_pressure[ni] = *stk::mesh::field_data(*pressure_, node );
p_density[ni] = *stk::mesh::field_data(densityNp1, node );
// gather vectors
const int niNdim = ni*nDim;
for ( int j=0; j < nDim; ++j ) {
p_vrtm[niNdim+j] = vrtm[j];
p_Gpdx[niNdim+j] = Gjp[j];
p_coordinates[niNdim+j] = coords[j];
}
}
// compute geometry
double scs_error = 0.0;
meSCS->determinant(1, &p_coordinates[0], &p_scs_areav[0], &scs_error);
// compute dndx for residual
if ( shiftPoisson_ )
meSCS->shifted_grad_op(1, &p_coordinates[0], &ws_dndx[0], &ws_deriv[0], &ws_det_j[0], &scs_error);
else
meSCS->grad_op(1, &p_coordinates[0], &ws_dndx[0], &ws_deriv[0], &ws_det_j[0], &scs_error);
// compute dndx for LHS
if ( reducedSensitivities_ )
meSCS->shifted_grad_op(1, &p_coordinates[0], &ws_dndx_lhs[0], &ws_deriv[0], &ws_det_j[0], &scs_error);
for ( int ip = 0; ip < numScsIp; ++ip ) {
// left and right nodes for this ip
const int il = lrscv[2*ip];
const int ir = lrscv[2*ip+1];
// corresponding matrix rows
int rowL = il*nodesPerElement;
int rowR = ir*nodesPerElement;
// setup for ip values; sneak in geometry for possible reduced sens
for ( int j = 0; j < nDim; ++j ) {
p_uIp[j] = 0.0;
p_rho_uIp[j] = 0.0;
p_GpdxIp[j] = 0.0;
p_dpdxIp[j] = 0.0;
}
double rhoIp = 0.0;
const int offSet = ip*nodesPerElement;
for ( int ic = 0; ic < nodesPerElement; ++ic ) {
const double r = p_shape_function[offSet+ic];
const double nodalPressure = p_pressure[ic];
const double nodalRho = p_density[ic];
rhoIp += r*nodalRho;
double lhsfac = 0.0;
const int offSetDnDx = nDim*nodesPerElement*ip + ic*nDim;
for ( int j = 0; j < nDim; ++j ) {
p_GpdxIp[j] += r*p_Gpdx[nDim*ic+j];
p_uIp[j] += r*p_vrtm[nDim*ic+j];
p_rho_uIp[j] += r*nodalRho*p_vrtm[nDim*ic+j];
p_dpdxIp[j] += p_dndx[offSetDnDx+j]*nodalPressure;
lhsfac += -p_dndx_lhs[offSetDnDx+j]*p_scs_areav[ip*nDim+j];
}
// assemble to lhs; left
p_lhs[rowL+ic] += lhsfac;
// assemble to lhs; right
p_lhs[rowR+ic] -= lhsfac;
}
// assemble mdot
double mdot = 0.0;
for ( int j = 0; j < nDim; ++j ) {
mdot += (interpTogether*p_rho_uIp[j] + om_interpTogether*rhoIp*p_uIp[j]
- projTimeScale*(p_dpdxIp[j] - p_GpdxIp[j]))*p_scs_areav[ip*nDim+j];
}
// residual; left and right
p_rhs[il] -= mdot/projTimeScale;
p_rhs[ir] += mdot/projTimeScale;
}
// call supplemental
for ( size_t i = 0; i < supplementalAlgSize; ++i )
supplementalAlg_[i]->elem_execute( &lhs[0], &rhs[0], elem, meSCS, meSCV);
apply_coeff(connected_nodes, rhs, lhs, __FILE__);
}
}
}
//--------------------------------------------------------------------------
//-------- execute ---------------------------------------------------------
//--------------------------------------------------------------------------
void
AssembleHeatCondIrradWallSolverAlgorithm::execute()
{
stk::mesh::MetaData & meta_data = realm_.meta_data();
const int nDim = meta_data.spatial_dimension();
const double sigma = realm_.get_stefan_boltzmann();
// space for LHS/RHS; nodesPerFace*nodesPerFace and nodesPerFace
std::vector<double> lhs;
std::vector<double> rhs;
std::vector<stk::mesh::Entity> connected_nodes;
// nodal fields to gather
std::vector<double> ws_irradiation;
std::vector<double> ws_emissivity;
std::vector<double> ws_temperature;
// geometry related to populate
std::vector<double> ws_shape_function;
// setup for buckets; union parts and ask for locally owned
stk::mesh::Selector s_locally_owned_union = meta_data.locally_owned_part()
&stk::mesh::selectUnion(partVec_);
stk::mesh::BucketVector const& face_buckets =
realm_.get_buckets( meta_data.side_rank(), s_locally_owned_union );
for ( stk::mesh::BucketVector::const_iterator ib = face_buckets.begin();
ib != face_buckets.end() ; ++ib ) {
stk::mesh::Bucket & b = **ib ;
// extract master element specifics
MasterElement *meFC = realm_.get_surface_master_element(b.topology());
const int nodesPerFace = meFC->nodesPerElement_;
const int numScsIp = meFC->numIntPoints_;
// resize some things; matrix related
const int lhsSize = nodesPerFace*nodesPerFace;
const int rhsSize = nodesPerFace;
lhs.resize(lhsSize);
rhs.resize(rhsSize);
connected_nodes.resize(nodesPerFace);
// algorithm related
ws_irradiation.resize(nodesPerFace);
ws_emissivity.resize(nodesPerFace);
ws_temperature.resize(nodesPerFace);
ws_shape_function.resize(numScsIp*nodesPerFace);
// pointers
double *p_lhs = &lhs[0];
double *p_rhs = &rhs[0];
double *p_irradiation = &ws_irradiation[0];
double *p_emissivity = &ws_emissivity[0];
double *p_temperature = &ws_temperature[0];
double *p_shape_function = &ws_shape_function[0];
if ( useShifted_ )
meFC->shifted_shape_fcn(&p_shape_function[0]);
else
meFC->shape_fcn(&p_shape_function[0]);
const stk::mesh::Bucket::size_type length = b.size();
for ( stk::mesh::Bucket::size_type k = 0 ; k < length ; ++k ) {
// zero lhs/rhs
for ( int p = 0; p < lhsSize; ++p )
p_lhs[p] = 0.0;
for ( int p = 0; p < rhsSize; ++p )
p_rhs[p] = 0.0;
// face data
double * areaVec = stk::mesh::field_data(*exposedAreaVec_, b, k);
// face node relations for nodal gather
stk::mesh::Entity const * face_node_rels = b.begin_nodes(k);
int num_nodes = b.num_nodes(k);
for ( int ni = 0; ni < num_nodes; ++ni ) {
// get the node and form connected_node
stk::mesh::Entity node = face_node_rels[ni];
connected_nodes[ni] = node;
// gather scalar
p_irradiation[ni] = *stk::mesh::field_data(*irradiation_, node);
p_emissivity[ni] = *stk::mesh::field_data(*emissivity_, node);
p_temperature[ni] = *stk::mesh::field_data(*temperature_, node);
}
// start the assembly
for ( int ip = 0; ip < numScsIp; ++ip ) {
double magA = 0.0;
for ( int j=0; j < nDim; ++j ) {
magA += areaVec[ip*nDim+j]*areaVec[ip*nDim+j];
}
magA = std::sqrt(magA);
const int nn = ip;
const int offSet = ip*nodesPerFace;
// form boundary ip values
double irradiationBip = 0.0;
double emissivityBip = 0.0;
double tBip = 0.0;
for ( int ic = 0; ic < nodesPerFace; ++ic ) {
const double r = p_shape_function[offSet+ic];
irradiationBip += r*p_irradiation[ic];
emissivityBip += r*p_emissivity[ic];
tBip += r*p_temperature[ic];
}
// form rhs contribution
const double radiation = emissivityBip*(irradiationBip - sigma*std::pow(tBip,4))*magA;
p_rhs[nn] += radiation;
// sensitivities
const int rowR = nn*nodesPerFace;
const double lhsFac = 4.0*sigma*emissivityBip*magA*std::pow(tBip,3);
for ( int ic = 0; ic < nodesPerFace; ++ic ) {
const double r = p_shape_function[offSet+ic];
p_lhs[rowR+ic] += r*lhsFac;
}
}
apply_coeff(connected_nodes, rhs, lhs, __FILE__);
}
}
}
//--------------------------------------------------------------------------
//-------- execute ---------------------------------------------------------
//--------------------------------------------------------------------------
void
AssemblePressureForceBCSolverAlgorithm::execute()
{
stk::mesh::BulkData & bulk_data = realm_.bulk_data();
stk::mesh::MetaData & meta_data = realm_.meta_data();
const int nDim = meta_data.spatial_dimension();
// space for LHS/RHS; nodesPerElem*nDim*nodesPerElem*nDim and nodesPerElem*nDim
std::vector<double> lhs;
std::vector<double> rhs;
std::vector<stk::mesh::Entity> connected_nodes;
// nodal fields to gather
std::vector<double> ws_face_coordinates;
std::vector<double> ws_bcScalarQ;
// master element
std::vector<double> ws_face_shape_function;
// define vector of parent topos; should always be UNITY in size
std::vector<stk::topology> parentTopo;
// define some common selectors
stk::mesh::Selector s_locally_owned_union = meta_data.locally_owned_part()
&stk::mesh::selectUnion(partVec_);
stk::mesh::BucketVector const& face_buckets =
realm_.get_buckets( meta_data.side_rank(), s_locally_owned_union );
for ( stk::mesh::BucketVector::const_iterator ib = face_buckets.begin();
ib != face_buckets.end() ; ++ib ) {
stk::mesh::Bucket & b = **ib ;
// extract connected element topology
b.parent_topology(stk::topology::ELEMENT_RANK, parentTopo);
ThrowAssert ( parentTopo.size() == 1 );
stk::topology theElemTopo = parentTopo[0];
// volume master element
MasterElement *meSCS = realm_.get_surface_master_element(theElemTopo);
const int nodesPerElement = meSCS->nodesPerElement_;
// face master element
MasterElement *meFC = realm_.get_surface_master_element(b.topology());
const int nodesPerFace = meFC->nodesPerElement_;
std::vector<int> face_node_ordinal_vec(nodesPerFace);
// resize some things; matrix related
const int lhsSize = nodesPerElement*nDim*nodesPerElement*nDim;
const int rhsSize = nodesPerElement*nDim;
lhs.resize(lhsSize);
rhs.resize(rhsSize);
connected_nodes.resize(nodesPerElement);
// algorithm related; element
ws_face_coordinates.resize(nodesPerFace*nDim);
ws_bcScalarQ.resize(nodesPerFace);
ws_face_shape_function.resize(nodesPerFace*nodesPerFace);
// pointers
double *p_lhs = &lhs[0];
double *p_rhs = &rhs[0];
double *p_face_coordinates = &ws_face_coordinates[0];
double *p_bcScalarQ = &ws_bcScalarQ[0];
double *p_face_shape_function = &ws_face_shape_function[0];
// shape functions
if (use_shifted_integration_)
{
meFC->shifted_shape_fcn(&p_face_shape_function[0]);
}
else{
meFC->shape_fcn(&p_face_shape_function[0]);
}
const size_t length = b.size();
for ( size_t k = 0 ; k < length ; ++k ) {
// zero lhs/rhs
for ( int p = 0; p < lhsSize; ++p )
p_lhs[p] = 0.0;
for ( int p = 0; p < rhsSize; ++p )
p_rhs[p] = 0.0;
// get face
stk::mesh::Entity face = b[k];
//======================================
// gather nodal data off of face
//======================================
stk::mesh::Entity const * face_node_rels = bulk_data .begin_nodes(face);
int num_face_nodes = bulk_data.num_nodes(face);
// sanity check on num nodes
ThrowAssert( num_face_nodes == nodesPerFace );
for ( int ni = 0; ni < num_face_nodes; ++ni ) {
stk::mesh::Entity node = face_node_rels[ni];
p_bcScalarQ[ni] = *stk::mesh::field_data(*bcScalarQ_, node);
// gather vectors
double * coords = stk::mesh::field_data(*coordinates_, node);
const int offSet = ni*nDim;
for ( int i=0; i < nDim; ++i ) {
p_face_coordinates[offSet+i] = coords[i];
}
}
// extract the connected element to this exposed face; should be single in size!
const stk::mesh::Entity* face_elem_rels = bulk_data.begin_elements(face);
ThrowAssert( bulk_data.num_elements(face) == 1 );
// get element; its face ordinal number and populate face_node_ordinal_vec
stk::mesh::Entity element = face_elem_rels[0];
const int face_ordinal = bulk_data.begin_element_ordinals(face)[0];
theElemTopo.side_node_ordinals(face_ordinal, face_node_ordinal_vec.begin());
//==========================================
// gather nodal data off of element; n/a
//==========================================
stk::mesh::Entity const * elem_node_rels = bulk_data.begin_nodes(element);
int num_nodes = bulk_data.num_nodes(element);
// sanity check on num nodes
ThrowAssert( num_nodes == nodesPerElement );
for ( int ni = 0; ni < num_nodes; ++ni ) {
stk::mesh::Entity node = elem_node_rels[ni];
// set connected nodes
connected_nodes[ni] = node;
}
// pointer to face data
double * areaVec = stk::mesh::field_data(*exposedAreaVec_, face);
// loop over face nodes
for ( int ip = 0; ip < num_face_nodes; ++ip ) {
const int nearestNode = face_node_ordinal_vec[ip];
const int offSetSF_face = ip*nodesPerFace;
// interpolate to bip
double fluxBip = 0.0;
for ( int ic = 0; ic < nodesPerFace; ++ic ) {
const double r = p_face_shape_function[offSetSF_face+ic];
fluxBip += r*p_bcScalarQ[ic];
}
// assemble for each of the ith component
for ( int i = 0; i < nDim; ++i ) {
const int indexR = nearestNode*nDim + i;
p_rhs[indexR] -= fluxBip*areaVec[ip*nDim+i];
// RHS only, no need to populate LHS (is zeroed out)
}
}
apply_coeff(connected_nodes, rhs, lhs, __FILE__);
}
}
}
//--------------------------------------------------------------------------
//-------- execute ---------------------------------------------------------
//--------------------------------------------------------------------------
void
SurfaceForceAndMomentWallFunctionAlgorithm::execute()
{
// check to see if this is a valid step to process output file
const int timeStepCount = realm_.get_time_step_count();
const bool processMe = (timeStepCount % frequency_) == 0 ? true : false;
// do not waste time here
if ( !processMe )
return;
stk::mesh::BulkData & bulk_data = realm_.bulk_data();
stk::mesh::MetaData & meta_data = realm_.meta_data();
const int nDim = meta_data.spatial_dimension();
// set min and max values
double yplusMin = 1.0e8;
double yplusMax = -1.0e8;
// bip values
std::vector<double> uBip(nDim);
std::vector<double> uBcBip(nDim);
std::vector<double> unitNormal(nDim);
// tangential work array
std::vector<double> uiTangential(nDim);
std::vector<double> uiBcTangential(nDim);
// pointers to fixed values
double *p_uBip = &uBip[0];
double *p_uBcBip = &uBcBip[0];
double *p_unitNormal= &unitNormal[0];
double *p_uiTangential = &uiTangential[0];
double *p_uiBcTangential = &uiBcTangential[0];
// nodal fields to gather
std::vector<double> ws_velocityNp1;
std::vector<double> ws_bcVelocity;
std::vector<double> ws_pressure;
std::vector<double> ws_density;
std::vector<double> ws_viscosity;
// master element
std::vector<double> ws_face_shape_function;
// deal with state
VectorFieldType &velocityNp1 = velocity_->field_of_state(stk::mesh::StateNP1);
ScalarFieldType &densityNp1 = density_->field_of_state(stk::mesh::StateNP1);
const double currentTime = realm_.get_current_time();
// local force and MomentWallFunction; i.e., to be assembled
double l_force_moment[9] = {};
// work force, MomentWallFunction and radius; i.e., to be pused to cross_product()
double ws_p_force[3] = {};
double ws_v_force[3] = {};
double ws_t_force[3] = {};
double ws_moment[3] = {};
double ws_radius[3] = {};
// centroid
double centroid[3] = {};
for ( size_t k = 0; k < parameters_.size(); ++k)
centroid[k] = parameters_[k];
// define some common selectors
stk::mesh::Selector s_locally_owned_union = meta_data.locally_owned_part()
&stk::mesh::selectUnion(partVec_);
stk::mesh::BucketVector const& face_buckets =
realm_.get_buckets( meta_data.side_rank(), s_locally_owned_union );
for ( stk::mesh::BucketVector::const_iterator ib = face_buckets.begin();
ib != face_buckets.end() ; ++ib ) {
stk::mesh::Bucket & b = **ib ;
// face master element
MasterElement *meFC = realm_.get_surface_master_element(b.topology());
const int nodesPerFace = meFC->nodesPerElement_;
// algorithm related; element
ws_velocityNp1.resize(nodesPerFace*nDim);
ws_bcVelocity.resize(nodesPerFace*nDim);
ws_pressure.resize(nodesPerFace);
ws_density.resize(nodesPerFace);
ws_viscosity.resize(nodesPerFace);
ws_face_shape_function.resize(nodesPerFace*nodesPerFace);
// pointers
double *p_velocityNp1 = &ws_velocityNp1[0];
double *p_bcVelocity = &ws_bcVelocity[0];
double *p_pressure = &ws_pressure[0];
double *p_density = &ws_density[0];
double *p_viscosity = &ws_viscosity[0];
double *p_face_shape_function = &ws_face_shape_function[0];
// shape functions
if ( useShifted_ )
meFC->shifted_shape_fcn(&p_face_shape_function[0]);
else
meFC->shape_fcn(&p_face_shape_function[0]);
const stk::mesh::Bucket::size_type length = b.size();
for ( stk::mesh::Bucket::size_type k = 0 ; k < length ; ++k ) {
// get face
stk::mesh::Entity face = b[k];
// face node relations
stk::mesh::Entity const * face_node_rels = bulk_data.begin_nodes(face);
//======================================
// gather nodal data off of face
//======================================
for ( int ni = 0; ni < nodesPerFace; ++ni ) {
stk::mesh::Entity node = face_node_rels[ni];
// gather scalars
p_pressure[ni] = *stk::mesh::field_data(*pressure_, node);
p_density[ni] = *stk::mesh::field_data(densityNp1, node);
p_viscosity[ni] = *stk::mesh::field_data(*viscosity_, node);
// gather vectors
double * uNp1 = stk::mesh::field_data(velocityNp1, node);
double * uBc = stk::mesh::field_data(*bcVelocity_, node);
const int offSet = ni*nDim;
for ( int j=0; j < nDim; ++j ) {
p_velocityNp1[offSet+j] = uNp1[j];
p_bcVelocity[offSet+j] = uBc[j];
}
}
// pointer to face data
const double * areaVec = stk::mesh::field_data(*exposedAreaVec_, face);
const double *wallNormalDistanceBip = stk::mesh::field_data(*wallNormalDistanceBip_, face);
const double *wallFrictionVelocityBip = stk::mesh::field_data(*wallFrictionVelocityBip_, face);
for ( int ip = 0; ip < nodesPerFace; ++ip ) {
// offsets
const int offSetAveraVec = ip*nDim;
const int offSetSF_face = ip*nodesPerFace;
// zero out vector quantities; squeeze in aMag
double aMag = 0.0;
for ( int j = 0; j < nDim; ++j ) {
p_uBip[j] = 0.0;
p_uBcBip[j] = 0.0;
const double axj = areaVec[offSetAveraVec+j];
aMag += axj*axj;
}
aMag = std::sqrt(aMag);
// interpolate to bip
double pBip = 0.0;
double rhoBip = 0.0;
double muBip = 0.0;
for ( int ic = 0; ic < nodesPerFace; ++ic ) {
const double r = p_face_shape_function[offSetSF_face+ic];
pBip += r*p_pressure[ic];
rhoBip += r*p_density[ic];
muBip += r*p_viscosity[ic];
const int offSetFN = ic*nDim;
for ( int j = 0; j < nDim; ++j ) {
p_uBip[j] += r*p_velocityNp1[offSetFN+j];
p_uBcBip[j] += r*p_bcVelocity[offSetFN+j];
}
}
// form unit normal
for ( int j = 0; j < nDim; ++j ) {
p_unitNormal[j] = areaVec[offSetAveraVec+j]/aMag;
}
// determine tangential velocity
double uTangential = 0.0;
for ( int i = 0; i < nDim; ++i ) {
double uiTan = 0.0;
double uiBcTan = 0.0;
for ( int j = 0; j < nDim; ++j ) {
const double ninj = p_unitNormal[i]*p_unitNormal[j];
if ( i==j ) {
const double om_nini = 1.0 - ninj;
uiTan += om_nini*p_uBip[j];
uiBcTan += om_nini*p_uBcBip[j];
}
else {
uiTan -= ninj*p_uBip[j];
uiBcTan -= ninj*p_uBcBip[j];
}
}
// save off tangential components and augment magnitude
p_uiTangential[i] = uiTan;
p_uiBcTangential[i] = uiBcTan;
uTangential += (uiTan-uiBcTan)*(uiTan-uiBcTan);
}
uTangential = std::sqrt(uTangential);
// extract bip data
const double yp = wallNormalDistanceBip[ip];
const double utau= wallFrictionVelocityBip[ip];
// determine yplus
const double yplusBip = rhoBip*yp*utau/muBip;
// min and max
yplusMin = std::min(yplusMin, yplusBip);
yplusMax = std::max(yplusMax, yplusBip);
double lambda = muBip/yp*aMag;
if ( yplusBip > yplusCrit_)
lambda = rhoBip*kappa_*utau/std::log(elog_*yplusBip)*aMag;
// extract nodal fields
stk::mesh::Entity node = face_node_rels[ip];
const double * coord = stk::mesh::field_data(*coordinates_, node );
double *pressureForce = stk::mesh::field_data(*pressureForce_, node );
double *tauWall = stk::mesh::field_data(*tauWall_, node );
double *yplus = stk::mesh::field_data(*yplus_, node );
const double assembledArea = *stk::mesh::field_data(*assembledArea_, node );
// load radius; assemble force -sigma_ij*njdS
double uParallel = 0.0;
for ( int i = 0; i < nDim; ++i ) {
const double ai = areaVec[offSetAveraVec+i];
ws_radius[i] = coord[i] - centroid[i];
const double uDiff = p_uiTangential[i] - p_uiBcTangential[i];
ws_p_force[i] = pBip*ai;
ws_v_force[i] = lambda*uDiff;
ws_t_force[i] = ws_p_force[i] + ws_v_force[i];
pressureForce[i] += ws_p_force[i];;
uParallel += uDiff*uDiff;
}
cross_product(&ws_t_force[0], &ws_moment[0], &ws_radius[0]);
// assemble for and moment
for ( int j = 0; j < 3; ++j ) {
l_force_moment[j] += ws_p_force[j];
l_force_moment[j+3] += ws_v_force[j];
l_force_moment[j+6] += ws_moment[j];
}
// assemble tauWall; area weighting is hiding in lambda/assembledArea
*tauWall += lambda*std::sqrt(uParallel)/assembledArea;
// deal with yplus
*yplus += yplusBip*aMag/assembledArea;
}
}
}
if ( processMe ) {
// parallel assemble and output
double g_force_moment[9] = {};
stk::ParallelMachine comm = NaluEnv::self().parallel_comm();
// Parallel assembly of L2
stk::all_reduce_sum(comm, &l_force_moment[0], &g_force_moment[0], 9);
// min/max
double g_yplusMin = 0.0, g_yplusMax = 0.0;
stk::all_reduce_min(comm, &yplusMin, &g_yplusMin, 1);
stk::all_reduce_max(comm, &yplusMax, &g_yplusMax, 1);
// deal with file name and banner
if ( NaluEnv::self().parallel_rank() == 0 ) {
std::ofstream myfile;
myfile.open(outputFileName_.c_str(), std::ios_base::app);
myfile << std::setprecision(6)
<< std::setw(w_)
<< currentTime << std::setw(w_)
<< g_force_moment[0] << std::setw(w_) << g_force_moment[1] << std::setw(w_) << g_force_moment[2] << std::setw(w_)
<< g_force_moment[3] << std::setw(w_) << g_force_moment[4] << std::setw(w_) << g_force_moment[5] << std::setw(w_)
<< g_force_moment[6] << std::setw(w_) << g_force_moment[7] << std::setw(w_) << g_force_moment[8] << std::setw(w_)
<< g_yplusMin << std::setw(w_) << g_yplusMax << std::endl;
myfile.close();
}
}
}
//--------------------------------------------------------------------------
//-------- execute ---------------------------------------------------------
//--------------------------------------------------------------------------
void
SurfaceForceAndMomentAlgorithm::execute()
{
// check to see if this is a valid step to process output file
const int timeStepCount = realm_.get_time_step_count();
const bool processMe = (timeStepCount % frequency_) == 0 ? true : false;
// do not waste time here
if ( !processMe )
return;
// common
stk::mesh::BulkData & bulk_data = realm_.bulk_data();
stk::mesh::MetaData & meta_data = realm_.meta_data();
const int nDim = meta_data.spatial_dimension();
// set min and max values
double yplusMin = 1.0e8;
double yplusMax = -1.0e8;
// nodal fields to gather
std::vector<double> ws_pressure;
std::vector<double> ws_density;
std::vector<double> ws_viscosity;
// master element
std::vector<double> ws_face_shape_function;
// deal with state
ScalarFieldType &densityNp1 = density_->field_of_state(stk::mesh::StateNP1);
// define vector of parent topos; should always be UNITY in size
std::vector<stk::topology> parentTopo;
const double currentTime = realm_.get_current_time();
// local force and moment; i.e., to be assembled
double l_force_moment[9] = {};
// work force, moment and radius; i.e., to be pushed to cross_product()
double ws_p_force[3] = {};
double ws_v_force[3] = {};
double ws_t_force[3] = {};
double ws_tau[3] = {};
double ws_moment[3] = {};
double ws_radius[3] = {};
// will need surface normal
double ws_normal[3] = {};
// centroid
double centroid[3] = {};
for ( size_t k = 0; k < parameters_.size(); ++k)
centroid[k] = parameters_[k];
// define some common selectors
stk::mesh::Selector s_locally_owned_union = meta_data.locally_owned_part()
&stk::mesh::selectUnion(partVec_);
stk::mesh::BucketVector const& face_buckets =
realm_.get_buckets( meta_data.side_rank(), s_locally_owned_union );
for ( stk::mesh::BucketVector::const_iterator ib = face_buckets.begin();
ib != face_buckets.end() ; ++ib ) {
stk::mesh::Bucket & b = **ib ;
// face master element
MasterElement *meFC = realm_.get_surface_master_element(b.topology());
const int nodesPerFace = meFC->nodesPerElement_;
std::vector<int> face_node_ordinal_vec(nodesPerFace);
// extract connected element topology
b.parent_topology(stk::topology::ELEMENT_RANK, parentTopo);
ThrowAssert ( parentTopo.size() == 1 );
stk::topology theElemTopo = parentTopo[0];
// extract master element for this element topo
MasterElement *meSCS = realm_.get_surface_master_element(theElemTopo);
// algorithm related; element
ws_pressure.resize(nodesPerFace);
ws_density.resize(nodesPerFace);
ws_viscosity.resize(nodesPerFace);
ws_face_shape_function.resize(nodesPerFace*nodesPerFace);
// pointers
double *p_pressure = &ws_pressure[0];
double *p_density = &ws_density[0];
double *p_viscosity = &ws_viscosity[0];
double *p_face_shape_function = &ws_face_shape_function[0];
// shape functions
if ( useShifted_ )
meFC->shifted_shape_fcn(&p_face_shape_function[0]);
else
meFC->shape_fcn(&p_face_shape_function[0]);
const stk::mesh::Bucket::size_type length = b.size();
for ( stk::mesh::Bucket::size_type k = 0 ; k < length ; ++k ) {
// get face
stk::mesh::Entity face = b[k];
// face node relations
stk::mesh::Entity const * face_node_rels = bulk_data.begin_nodes(face);
//======================================
// gather nodal data off of face
//======================================
for ( int ni = 0; ni < nodesPerFace; ++ni ) {
stk::mesh::Entity node = face_node_rels[ni];
// gather scalars
p_pressure[ni] = *stk::mesh::field_data(*pressure_, node);
p_density[ni] = *stk::mesh::field_data(densityNp1, node);
p_viscosity[ni] = *stk::mesh::field_data(*viscosity_, node);
}
// pointer to face data
const double * areaVec = stk::mesh::field_data(*exposedAreaVec_, face);
// extract the connected element to this exposed face; should be single in size!
const stk::mesh::Entity* face_elem_rels = bulk_data.begin_elements(face);
ThrowAssert( bulk_data.num_elements(face) == 1 );
// get element; its face ordinal number and populate face_node_ordinal_vec
stk::mesh::Entity element = face_elem_rels[0];
const int face_ordinal = bulk_data.begin_element_ordinals(face)[0];
theElemTopo.side_node_ordinals(face_ordinal, face_node_ordinal_vec.begin());
// get the relations off of element
stk::mesh::Entity const * elem_node_rels = bulk_data.begin_nodes(element);
for ( int ip = 0; ip < nodesPerFace; ++ip ) {
// offsets
const int offSetAveraVec = ip*nDim;
const int offSetSF_face = ip*nodesPerFace;
// interpolate to bip
double pBip = 0.0;
double rhoBip = 0.0;
double muBip = 0.0;
for ( int ic = 0; ic < nodesPerFace; ++ic ) {
const double r = p_face_shape_function[offSetSF_face+ic];
pBip += r*p_pressure[ic];
rhoBip += r*p_density[ic];
muBip += r*p_viscosity[ic];
}
// extract nodal fields
stk::mesh::Entity node = face_node_rels[ip];
const double * coord = stk::mesh::field_data(*coordinates_, node );
const double *duidxj = stk::mesh::field_data(*dudx_, node );
double *pressureForce = stk::mesh::field_data(*pressureForce_, node );
double *tauWall = stk::mesh::field_data(*tauWall_, node );
double *yplus = stk::mesh::field_data(*yplus_, node );
const double assembledArea = *stk::mesh::field_data(*assembledArea_, node );
// divU and aMag
double divU = 0.0;
double aMag = 0.0;
for ( int j = 0; j < nDim; ++j) {
divU += duidxj[j*nDim+j];
aMag += areaVec[offSetAveraVec+j]*areaVec[offSetAveraVec+j];
}
aMag = std::sqrt(aMag);
// normal
for ( int i = 0; i < nDim; ++i ) {
const double ai = areaVec[offSetAveraVec+i];
ws_normal[i] = ai/aMag;
}
// load radius; assemble force -sigma_ij*njdS and compute tau_ij njDs
for ( int i = 0; i < nDim; ++i ) {
const double ai = areaVec[offSetAveraVec+i];
ws_radius[i] = coord[i] - centroid[i];
// set forces
ws_v_force[i] = 2.0/3.0*muBip*divU*includeDivU_*ai;
ws_p_force[i] = pBip*ai;
pressureForce[i] += pBip*ai;
double dflux = 0.0;
double tauijNj = 0.0;
const int offSetI = nDim*i;
for ( int j = 0; j < nDim; ++j ) {
const int offSetTrans = nDim*j+i;
dflux += -muBip*(duidxj[offSetI+j] + duidxj[offSetTrans])*areaVec[offSetAveraVec+j];
tauijNj += -muBip*(duidxj[offSetI+j] + duidxj[offSetTrans])*ws_normal[j];
}
// accumulate viscous force and set tau for component i
ws_v_force[i] += dflux;
ws_tau[i] = tauijNj;
}
// compute total force and tangential tau
double tauTangential = 0.0;
for ( int i = 0; i < nDim; ++i ) {
ws_t_force[i] = ws_p_force[i] + ws_v_force[i];
double tauiTangential = (1.0-ws_normal[i]*ws_normal[i])*ws_tau[i];
for ( int j = 0; j < nDim; ++j ) {
if ( i != j )
tauiTangential -= ws_normal[i]*ws_normal[j]*ws_tau[j];
}
tauTangential += tauiTangential*tauiTangential;
}
// assemble nodal quantities; scaled by area for L2 lumped nodal projection
const double areaFac = aMag/assembledArea;
*tauWall += std::sqrt(tauTangential)*areaFac;
cross_product(&ws_t_force[0], &ws_moment[0], &ws_radius[0]);
// assemble force and moment
for ( int j = 0; j < 3; ++j ) {
l_force_moment[j] += ws_p_force[j];
l_force_moment[j+3] += ws_v_force[j];
l_force_moment[j+6] += ws_moment[j];
}
// deal with yplus
const int opposingNode = meSCS->opposingNodes(face_ordinal,ip);
const int nearestNode = face_node_ordinal_vec[ip];
// left and right nodes; right is on the face; left is the opposing node
stk::mesh::Entity nodeL = elem_node_rels[opposingNode];
stk::mesh::Entity nodeR = elem_node_rels[nearestNode];
// extract nodal fields
const double * coordL = stk::mesh::field_data(*coordinates_, nodeL );
const double * coordR = stk::mesh::field_data(*coordinates_, nodeR );
// determine yp (approximated by 1/4 distance along edge)
double ypBip = 0.0;
for ( int j = 0; j < nDim; ++j ) {
const double nj = ws_normal[j];
const double ej = 0.25*(coordR[j] - coordL[j]);
ypBip += nj*ej*nj*ej;
}
ypBip = std::sqrt(ypBip);
const double tauW = std::sqrt(tauTangential);
const double uTau = std::sqrt(tauW/rhoBip);
const double yplusBip = rhoBip*ypBip/muBip*uTau;
// nodal field
*yplus += yplusBip*areaFac;
// min and max
yplusMin = std::min(yplusMin, yplusBip);
yplusMax = std::max(yplusMax, yplusBip);
}
}
}
if ( processMe ) {
// parallel assemble and output
double g_force_moment[9] = {};
stk::ParallelMachine comm = NaluEnv::self().parallel_comm();
// Parallel assembly of L2
stk::all_reduce_sum(comm, &l_force_moment[0], &g_force_moment[0], 9);
// min/max
double g_yplusMin = 0.0, g_yplusMax = 0.0;
stk::all_reduce_min(comm, &yplusMin, &g_yplusMin, 1);
stk::all_reduce_max(comm, &yplusMax, &g_yplusMax, 1);
// deal with file name and banner
if ( NaluEnv::self().parallel_rank() == 0 ) {
std::ofstream myfile;
myfile.open(outputFileName_.c_str(), std::ios_base::app);
myfile << std::setprecision(6)
<< std::setw(w_)
<< currentTime << std::setw(w_)
<< g_force_moment[0] << std::setw(w_) << g_force_moment[1] << std::setw(w_) << g_force_moment[2] << std::setw(w_)
<< g_force_moment[3] << std::setw(w_) << g_force_moment[4] << std::setw(w_) << g_force_moment[5] << std::setw(w_)
<< g_force_moment[6] << std::setw(w_) << g_force_moment[7] << std::setw(w_) << g_force_moment[8] << std::setw(w_)
<< g_yplusMin << std::setw(w_) << g_yplusMax << std::endl;
myfile.close();
}
}
}
//--------------------------------------------------------------------------
//-------- execute ---------------------------------------------------------
//--------------------------------------------------------------------------
void
AssembleNodalGradUBoundaryAlgorithm::execute()
{
stk::mesh::MetaData & meta_data = realm_.meta_data();
const int nDim = meta_data.spatial_dimension();
// extract fields
GenericFieldType *exposedAreaVec = meta_data.get_field<GenericFieldType>(meta_data.side_rank(), "exposed_area_vector");
ScalarFieldType *dualNodalVolume = meta_data.get_field<ScalarFieldType>(stk::topology::NODE_RANK, "dual_nodal_volume");
// nodal fields to gather; gather everything other than what we are assembling
std::vector<double> ws_vectorQ;
// geometry related to populate
std::vector<double> ws_shape_function;
// ip data
std::vector<double>qIp(nDim);
// define some common selectors
stk::mesh::Selector s_locally_owned_union = meta_data.locally_owned_part()
&stk::mesh::selectUnion(partVec_);
stk::mesh::BucketVector const& face_buckets =
realm_.get_buckets( meta_data.side_rank(), s_locally_owned_union );
for ( stk::mesh::BucketVector::const_iterator ib = face_buckets.begin();
ib != face_buckets.end() ; ++ib ) {
stk::mesh::Bucket & b = **ib ;
const stk::mesh::Bucket::size_type length = b.size();
// extract master element
MasterElement *meFC = realm_.get_surface_master_element(b.topology());
// extract master element specifics
const int nodesPerFace = meFC->nodesPerElement_;
const int numScsIp = meFC->numIntPoints_;
// algorithm related
ws_vectorQ.resize(nodesPerFace*nDim);
ws_shape_function.resize(numScsIp*nodesPerFace);
// pointers
double *p_vectorQ = &ws_vectorQ[0];
double *p_shape_function = &ws_shape_function[0];
if ( useShifted_ )
meFC->shifted_shape_fcn(&p_shape_function[0]);
else
meFC->shape_fcn(&p_shape_function[0]);
for ( stk::mesh::Bucket::size_type k = 0 ; k < length ; ++k ) {
// face data
double * areaVec = stk::mesh::field_data(*exposedAreaVec, b, k);
//===============================================
// gather nodal data; this is how we do it now..
//===============================================
stk::mesh::Entity const * face_node_rels = b.begin_nodes(k);
int num_nodes = b.num_nodes(k);
// sanity check on num nodes
ThrowAssert( num_nodes == nodesPerFace );
for ( int ni = 0; ni < num_nodes; ++ni ) {
stk::mesh::Entity node = face_node_rels[ni];
// pointers to real data
double * vectorQ = stk::mesh::field_data(*vectorQ_, node );
// gather vectors
const int offSet = ni*nDim;
for ( int j=0; j < nDim; ++j ) {
p_vectorQ[offSet+j] = vectorQ[j];
}
}
// start assembly
for ( int ip = 0; ip < numScsIp; ++ip ) {
// nearest node
const int nn = ip;
stk::mesh::Entity nodeNN = face_node_rels[nn];
// pointer to fields to assemble
double *gradQNN = stk::mesh::field_data(*dqdx_, nodeNN );
// suplemental
double volNN = *stk::mesh::field_data(*dualNodalVolume, nodeNN);
// interpolate to scs point; operate on saved off ws_field
for (int j =0; j < nDim; ++j )
qIp[j] = 0.0;
const int offSet = ip*nodesPerFace;
for ( int ic = 0; ic < nodesPerFace; ++ic ) {
const double r = p_shape_function[offSet+ic];
for ( int j = 0; j < nDim; ++j ) {
qIp[j] += r*p_vectorQ[ic*nDim+j];
}
}
// nearest node volume
double inv_volNN = 1.0/volNN;
// assemble to nearest node
for ( int i = 0; i < nDim; ++i ) {
const int row_gradQ = i*nDim;
double qip = qIp[i];
for ( int j = 0; j < nDim; ++j ) {
double fac = qip*areaVec[ip*nDim+j];
gradQNN[row_gradQ+j] += fac*inv_volNN;
}
}
}
}
}
}
//--------------------------------------------------------------------------
//-------- execute ---------------------------------------------------------
//--------------------------------------------------------------------------
void
AssembleNodalGradUElemAlgorithm::execute()
{
stk::mesh::MetaData & meta_data = realm_.meta_data();
const int nDim = meta_data.spatial_dimension();
// extract fields
ScalarFieldType *dualNodalVolume = meta_data.get_field<ScalarFieldType>(stk::topology::NODE_RANK, "dual_nodal_volume");
VectorFieldType *coordinates = meta_data.get_field<VectorFieldType>(stk::topology::NODE_RANK, realm_.get_coordinates_name());
// nodal fields to gather; gather everything other than what we are assembling
std::vector<double> ws_vectorQ;
std::vector<double> ws_dualVolume;
std::vector<double> ws_coordinates;
// geometry related to populate
std::vector<double> ws_scs_areav;
std::vector<double> ws_shape_function;
// ip data
std::vector<double>qIp(nDim);
// define some common selectors
stk::mesh::Selector s_locally_owned_union = meta_data.locally_owned_part()
&stk::mesh::selectUnion(partVec_);
stk::mesh::BucketVector const& elem_buckets =
realm_.get_buckets( stk::topology::ELEMENT_RANK, s_locally_owned_union );
for ( stk::mesh::BucketVector::const_iterator ib = elem_buckets.begin();
ib != elem_buckets.end() ; ++ib ) {
stk::mesh::Bucket & b = **ib ;
const stk::mesh::Bucket::size_type length = b.size();
// extract master element
MasterElement *meSCS = realm_.get_surface_master_element(b.topology());
// extract master element specifics
const int nodesPerElement = meSCS->nodesPerElement_;
const int numScsIp = meSCS->numIntPoints_;
const int *lrscv = meSCS->adjacentNodes();
// algorithm related
ws_vectorQ.resize(nodesPerElement*nDim);
ws_dualVolume.resize(nodesPerElement);
ws_coordinates.resize(nodesPerElement*nDim);
ws_scs_areav.resize(numScsIp*nDim);
ws_shape_function.resize(numScsIp*nodesPerElement);
// pointers.
double *p_vectorQ = &ws_vectorQ[0];
double *p_dualVolume = &ws_dualVolume[0];
double *p_coordinates = &ws_coordinates[0];
double *p_scs_areav = &ws_scs_areav[0];
double *p_shape_function = &ws_shape_function[0];
if ( useShifted_ )
meSCS->shifted_shape_fcn(&p_shape_function[0]);
else
meSCS->shape_fcn(&p_shape_function[0]);
for ( stk::mesh::Bucket::size_type k = 0 ; k < length ; ++k ) {
//===============================================
// gather nodal data; this is how we do it now..
//===============================================
stk::mesh::Entity const * node_rels = b.begin_nodes(k);
int num_nodes = b.num_nodes(k);
// sanity check on num nodes
ThrowAssert( num_nodes == nodesPerElement );
// note: we absolutely need to gather coords since it
// is required to compute the area vector. however,
// ws_scalarQ and ws_dualVolume are choices to avoid
// field data call for interpolation
for ( int ni = 0; ni < num_nodes; ++ni ) {
stk::mesh::Entity node = node_rels[ni];
// pointers to real data
double * coords = stk::mesh::field_data(*coordinates, node);
double * vectorQ = stk::mesh::field_data(*vectorQ_, node);
// gather scalars
p_dualVolume[ni] = *stk::mesh::field_data(*dualNodalVolume, node);
// gather vectors
const int offSet = ni*nDim;
for ( int j=0; j < nDim; ++j ) {
p_coordinates[offSet+j] = coords[j];
p_vectorQ[offSet+j] = vectorQ[j];
}
}
// compute geometry
double scs_error = 0.0;
meSCS->determinant(1, &p_coordinates[0], &p_scs_areav[0], &scs_error);
// start assembly
for ( int ip = 0; ip < numScsIp; ++ip ) {
// left and right nodes for this ip
const int il = lrscv[2*ip];
const int ir = lrscv[2*ip+1];
stk::mesh::Entity nodeL = node_rels[il];
stk::mesh::Entity nodeR = node_rels[ir];
// pointer to fields to assemble
double *gradQL = stk::mesh::field_data(*dqdx_, nodeL);
double *gradQR = stk::mesh::field_data(*dqdx_, nodeR);
// interpolate to scs point; operate on saved off ws_field
for (int j=0; j < nDim; ++j )
qIp[j] = 0.0;
const int offSet = ip*nodesPerElement;
for ( int ic = 0; ic < nodesPerElement; ++ic ) {
const double r = p_shape_function[offSet+ic];
for ( int j = 0; j < nDim; ++j ) {
qIp[j] += r*p_vectorQ[ic*nDim+j];
}
}
// left and right volume
double inv_volL = 1.0/p_dualVolume[il];
double inv_volR = 1.0/p_dualVolume[ir];
// assemble to il/ir
for ( int i = 0; i < nDim; ++i ) {
const int row_gradQ = i*nDim;
const double qip = qIp[i];
for ( int j = 0; j < nDim; ++j ) {
double fac = qip*p_scs_areav[ip*nDim+j];
gradQL[row_gradQ+j] += fac*inv_volL;
gradQR[row_gradQ+j] -= fac*inv_volR;
}
}
}
}
}
}
//--------------------------------------------------------------------------
//-------- execute ---------------------------------------------------------
//--------------------------------------------------------------------------
void
AssembleContinuityElemOpenSolverAlgorithm::execute()
{
stk::mesh::BulkData & bulk_data = realm_.bulk_data();
stk::mesh::MetaData & meta_data = realm_.meta_data();
const int nDim = meta_data.spatial_dimension();
// extract noc
const std::string dofName = "pressure";
const double includeNOC
= (realm_.get_noc_usage(dofName) == true) ? 1.0 : 0.0;
// space for LHS/RHS; nodesPerElem*nodesPerElem and nodesPerElem
std::vector<double> lhs;
std::vector<double> rhs;
std::vector<stk::mesh::Entity> connected_nodes;
// ip values; both boundary and opposing surface
std::vector<double> uBip(nDim);
std::vector<double> rho_uBip(nDim);
std::vector<double> GpdxBip(nDim);
std::vector<double> coordBip(nDim);
std::vector<double> coordScs(nDim);
// pointers to fixed values
double *p_uBip = &uBip[0];
double *p_rho_uBip = &rho_uBip[0];
double *p_GpdxBip = &GpdxBip[0];
double *p_coordBip = &coordBip[0];
double *p_coordScs = &coordScs[0];
// nodal fields to gather
std::vector<double> ws_coordinates;
std::vector<double> ws_pressure;
std::vector<double> ws_vrtm;
std::vector<double> ws_Gpdx;
std::vector<double> ws_density;
std::vector<double> ws_bcPressure;
// master element
std::vector<double> ws_shape_function;
std::vector<double> ws_shape_function_lhs;
std::vector<double> ws_face_shape_function;
// time step
const double dt = realm_.get_time_step();
const double gamma1 = realm_.get_gamma1();
const double projTimeScale = dt/gamma1;
// deal with interpolation procedure
const double interpTogether = realm_.get_mdot_interp();
const double om_interpTogether = 1.0-interpTogether;
// deal with state
ScalarFieldType &densityNp1 = density_->field_of_state(stk::mesh::StateNP1);
// define vector of parent topos; should always be UNITY in size
std::vector<stk::topology> parentTopo;
// define some common selectors
stk::mesh::Selector s_locally_owned_union = meta_data.locally_owned_part()
&stk::mesh::selectUnion(partVec_);
stk::mesh::BucketVector const& face_buckets =
realm_.get_buckets( meta_data.side_rank(), s_locally_owned_union );
for ( stk::mesh::BucketVector::const_iterator ib = face_buckets.begin();
ib != face_buckets.end() ; ++ib ) {
stk::mesh::Bucket & b = **ib ;
// extract connected element topology
b.parent_topology(stk::topology::ELEMENT_RANK, parentTopo);
ThrowAssert ( parentTopo.size() == 1 );
stk::topology theElemTopo = parentTopo[0];
// volume master element
MasterElement *meSCS = realm_.get_surface_master_element(theElemTopo);
const int nodesPerElement = meSCS->nodesPerElement_;
const int numScsIp = meSCS->numIntPoints_;
// face master element
MasterElement *meFC = realm_.get_surface_master_element(b.topology());
const int nodesPerFace = b.topology().num_nodes();
const int numScsBip = meFC->numIntPoints_;
std::vector<int> face_node_ordinal_vec(nodesPerFace);
// resize some things; matrix related
const int lhsSize = nodesPerElement*nodesPerElement;
const int rhsSize = nodesPerElement;
lhs.resize(lhsSize);
rhs.resize(rhsSize);
connected_nodes.resize(nodesPerElement);
// algorithm related; element
ws_coordinates.resize(nodesPerElement*nDim);
ws_pressure.resize(nodesPerElement);
ws_vrtm.resize(nodesPerFace*nDim);
ws_Gpdx.resize(nodesPerFace*nDim);
ws_density.resize(nodesPerFace);
ws_bcPressure.resize(nodesPerFace);
ws_shape_function.resize(numScsIp*nodesPerElement);
ws_shape_function_lhs.resize(numScsIp*nodesPerElement);
ws_face_shape_function.resize(numScsBip*nodesPerFace);
// pointers
double *p_lhs = &lhs[0];
double *p_rhs = &rhs[0];
double *p_coordinates = &ws_coordinates[0];
double *p_pressure = &ws_pressure[0];
double *p_vrtm = &ws_vrtm[0];
double *p_Gpdx = &ws_Gpdx[0];
double *p_density = &ws_density[0];
double *p_bcPressure = &ws_bcPressure[0];
double *p_shape_function = &ws_shape_function[0];
double *p_shape_function_lhs = shiftPoisson_ ? &ws_shape_function[0] : reducedSensitivities_ ? &ws_shape_function_lhs[0] : &ws_shape_function[0];
double *p_face_shape_function = &ws_face_shape_function[0];
// shape functions; interior
if ( shiftPoisson_ )
meSCS->shifted_shape_fcn(&p_shape_function[0]);
else
meSCS->shape_fcn(&p_shape_function[0]);
if ( !shiftPoisson_ && reducedSensitivities_ )
meSCS->shifted_shape_fcn(&p_shape_function_lhs[0]);
// shape functions; boundary
if ( shiftMdot_ )
meFC->shifted_shape_fcn(&p_face_shape_function[0]);
else
meFC->shape_fcn(&p_face_shape_function[0]);
const stk::mesh::Bucket::size_type length = b.size();
for ( stk::mesh::Bucket::size_type k = 0 ; k < length ; ++k ) {
// zero lhs/rhs
for ( int p = 0; p < lhsSize; ++p )
p_lhs[p] = 0.0;
for ( int p = 0; p < rhsSize; ++p )
p_rhs[p] = 0.0;
// get face
stk::mesh::Entity face = b[k];
//======================================
// gather nodal data off of face
//======================================
stk::mesh::Entity const * face_node_rels = bulk_data.begin_nodes(face);
int num_face_nodes = bulk_data.num_nodes(face);
// sanity check on num nodes
ThrowAssert( num_face_nodes == nodesPerFace );
for ( int ni = 0; ni < num_face_nodes; ++ni ) {
stk::mesh::Entity node = face_node_rels[ni];
// gather scalars
p_density[ni] = *stk::mesh::field_data(densityNp1, node);
p_bcPressure[ni] = *stk::mesh::field_data(*pressureBc_, node);
// gather vectors
const double * vrtm = stk::mesh::field_data(*velocityRTM_, node);
const double * Gjp = stk::mesh::field_data(*Gpdx_, node);
const int offSet = ni*nDim;
for ( int j=0; j < nDim; ++j ) {
p_vrtm[offSet+j] = vrtm[j];
p_Gpdx[offSet+j] = Gjp[j];
}
}
// pointer to face data
const double * areaVec = stk::mesh::field_data(*exposedAreaVec_, face);
// extract the connected element to this exposed face; should be single in size!
const stk::mesh::Entity* face_elem_rels = bulk_data.begin_elements(face);
ThrowAssert( bulk_data.num_elements(face) == 1 );
// get element; its face ordinal number and populate face_node_ordinal_vec
stk::mesh::Entity element = face_elem_rels[0];
const stk::mesh::ConnectivityOrdinal* face_elem_ords = bulk_data.begin_element_ordinals(face);
const int face_ordinal = face_elem_ords[0];
theElemTopo.side_node_ordinals(face_ordinal, face_node_ordinal_vec.begin());
// mapping from ip to nodes for this ordinal
const int *ipNodeMap = meSCS->ipNodeMap(face_ordinal);
//======================================
// gather nodal data off of element
//======================================
stk::mesh::Entity const * elem_node_rels = bulk_data.begin_nodes(element);
int num_nodes = bulk_data.num_nodes(element);
// sanity check on num nodes
ThrowAssert( num_nodes == nodesPerElement );
for ( int ni = 0; ni < num_nodes; ++ni ) {
stk::mesh::Entity node = elem_node_rels[ni];
// set connected nodes
connected_nodes[ni] = node;
// gather scalars
p_pressure[ni] = *stk::mesh::field_data(*pressure_, node);
// gather vectors
const double * coords = stk::mesh::field_data(*coordinates_, node);
const int offSet = ni*nDim;
for ( int j=0; j < nDim; ++j ) {
p_coordinates[offSet+j] = coords[j];
}
}
// loop over boundary ips
for ( int ip = 0; ip < numScsBip; ++ip ) {
const int nearestNode = ipNodeMap[ip];
const int opposingScsIp = meSCS->opposingFace(face_ordinal,ip);
// zero out vector quantities
for ( int j = 0; j < nDim; ++j ) {
p_uBip[j] = 0.0;
p_rho_uBip[j] = 0.0;
p_GpdxBip[j] = 0.0;
p_coordBip[j] = 0.0;
p_coordScs[j] = 0.0;
}
double rhoBip = 0.0;
// interpolate to bip
double pBip = 0.0;
const int offSetSF_face = ip*nodesPerFace;
for ( int ic = 0; ic < nodesPerFace; ++ic ) {
const int fn = face_node_ordinal_vec[ic];
const double r = p_face_shape_function[offSetSF_face+ic];
const double rhoIC = p_density[ic];
rhoBip += r*rhoIC;
pBip += r*p_bcPressure[ic];
const int offSetFN = ic*nDim;
const int offSetEN = fn*nDim;
for ( int j = 0; j < nDim; ++j ) {
p_uBip[j] += r*p_vrtm[offSetFN+j];
p_rho_uBip[j] += r*rhoIC*p_vrtm[offSetFN+j];
p_GpdxBip[j] += r*p_Gpdx[offSetFN+j];
p_coordBip[j] += r*p_coordinates[offSetEN+j];
}
}
// data at interior opposing face
double pScs = 0.0;
const int offSetSF_elem = opposingScsIp*nodesPerElement;
for ( int ic = 0; ic < nodesPerElement; ++ic ) {
const double r = p_shape_function[offSetSF_elem+ic];
pScs += r*p_pressure[ic];
const int offSet = ic*nDim;
for ( int j = 0; j < nDim; ++j ) {
p_coordScs[j] += r*p_coordinates[offSet+j];
}
}
// form axdx, asq and mdot (without dp/dn or noc)
double asq = 0.0;
double axdx = 0.0;
double mdot = 0.0;
for ( int j = 0; j < nDim; ++j ) {
const double dxj = p_coordBip[j] - p_coordScs[j];
const double axj = areaVec[ip*nDim+j];
asq += axj*axj;
axdx += axj*dxj;
mdot += (interpTogether*p_rho_uBip[j] + om_interpTogether*rhoBip*p_uBip[j]
+ projTimeScale*p_GpdxBip[j])*axj;
}
const double inv_axdx = 1.0/axdx;
// deal with noc
double noc = 0.0;
for ( int j = 0; j < nDim; ++j ) {
const double dxj = p_coordBip[j] - p_coordScs[j];
const double axj = areaVec[ip*nDim+j];
const double kxj = axj - asq*inv_axdx*dxj; // NOC
noc += kxj*p_GpdxBip[j];
}
// lhs for pressure system
int rowR = nearestNode*nodesPerElement;
for ( int ic = 0; ic < nodesPerElement; ++ic ) {
const double r = p_shape_function_lhs[offSetSF_elem+ic];
p_lhs[rowR+ic] += r*asq*inv_axdx;
}
// final mdot
mdot += -projTimeScale*((pBip-pScs)*asq*inv_axdx + noc*includeNOC);
// residual
p_rhs[nearestNode] -= mdot/projTimeScale;
}
apply_coeff(connected_nodes, rhs, lhs, __FILE__);
}
}
}
//--------------------------------------------------------------------------
//-------- execute ---------------------------------------------------------
//--------------------------------------------------------------------------
void
ComputeMdotElemAlgorithm::execute()
{
stk::mesh::MetaData & meta_data = realm_.meta_data();
const int nDim = meta_data.spatial_dimension();
// time step
const double dt = realm_.get_time_step();
const double gamma1 = realm_.get_gamma1();
const double projTimeScale = dt/gamma1;
// deal with interpolation procedure
const double interpTogether = realm_.get_mdot_interp();
const double om_interpTogether = 1.0-interpTogether;
// nodal fields to gather
std::vector<double> ws_vrtm;
std::vector<double> ws_Gpdx;
std::vector<double> ws_coordinates;
std::vector<double> ws_pressure;
std::vector<double> ws_density;
// geometry related to populate
std::vector<double> ws_scs_areav;
std::vector<double> ws_dndx;
std::vector<double> ws_deriv;
std::vector<double> ws_det_j;
std::vector<double> ws_shape_function;
// integration point data that depends on size
std::vector<double> uIp(nDim);
std::vector<double> rho_uIp(nDim);
std::vector<double> GpdxIp(nDim);
std::vector<double> dpdxIp(nDim);
// pointers to everyone...
double *p_uIp = &uIp[0];
double *p_rho_uIp = &rho_uIp[0];
double *p_GpdxIp = &GpdxIp[0];
double *p_dpdxIp = &dpdxIp[0];
// deal with state
ScalarFieldType &densityNp1 = density_->field_of_state(stk::mesh::StateNP1);
// define some common selectors
stk::mesh::Selector s_locally_owned_union = meta_data.locally_owned_part()
&stk::mesh::selectUnion(partVec_);
stk::mesh::BucketVector const& elem_buckets =
realm_.get_buckets( stk::topology::ELEMENT_RANK, s_locally_owned_union );
for ( stk::mesh::BucketVector::const_iterator ib = elem_buckets.begin();
ib != elem_buckets.end() ; ++ib ) {
stk::mesh::Bucket & b = **ib ;
const stk::mesh::Bucket::size_type length = b.size();
// extract master element
MasterElement *meSCS = realm_.get_surface_master_element(b.topology());
// extract master element specifics
const int nodesPerElement = meSCS->nodesPerElement_;
const int numScsIp = meSCS->numIntPoints_;
// algorithm related
ws_vrtm.resize(nodesPerElement*nDim);
ws_Gpdx.resize(nodesPerElement*nDim);
ws_coordinates.resize(nodesPerElement*nDim);
ws_pressure.resize(nodesPerElement);
ws_density.resize(nodesPerElement);
ws_scs_areav.resize(numScsIp*nDim);
ws_dndx.resize(nDim*numScsIp*nodesPerElement);
ws_deriv.resize(nDim*numScsIp*nodesPerElement);
ws_det_j.resize(numScsIp);
ws_shape_function.resize(numScsIp*nodesPerElement);
// pointers
double *p_vrtm = &ws_vrtm[0];
double *p_Gpdx = &ws_Gpdx[0];
double *p_coordinates = &ws_coordinates[0];
double *p_pressure = &ws_pressure[0];
double *p_density = &ws_density[0];
double *p_scs_areav = &ws_scs_areav[0];
double *p_dndx = &ws_dndx[0];
double *p_shape_function = &ws_shape_function[0];
if ( shiftMdot_)
meSCS->shifted_shape_fcn(&p_shape_function[0]);
else
meSCS->shape_fcn(&p_shape_function[0]);
for ( stk::mesh::Bucket::size_type k = 0 ; k < length ; ++k ) {
// pointers to elem data
double * mdot = stk::mesh::field_data(*massFlowRate_, b, k );
//===============================================
// gather nodal data; this is how we do it now..
//===============================================
stk::mesh::Entity const * node_rels = b.begin_nodes(k);
int num_nodes = b.num_nodes(k);
// sanity check on num nodes
ThrowAssert( num_nodes == nodesPerElement );
for ( int ni = 0; ni < num_nodes; ++ni ) {
stk::mesh::Entity node = node_rels[ni];
// pointers to real data
const double * vrtm = stk::mesh::field_data(*velocityRTM_, node);
const double * Gjp = stk::mesh::field_data(*Gpdx_, node);
const double * coords = stk::mesh::field_data(*coordinates_, node);
// gather scalars
p_pressure[ni] = *stk::mesh::field_data(*pressure_, node);
p_density[ni] = *stk::mesh::field_data(densityNp1, node);
// gather vectors
const int offSet = ni*nDim;
for ( int j=0; j < nDim; ++j ) {
p_vrtm[offSet+j] = vrtm[j];
p_Gpdx[offSet+j] = Gjp[j];
p_coordinates[offSet+j] = coords[j];
}
}
// compute geometry
double scs_error = 0.0;
meSCS->determinant(1, &p_coordinates[0], &p_scs_areav[0], &scs_error);
// compute dndx
if (shiftPoisson_)
meSCS->shifted_grad_op(1, &p_coordinates[0], &p_dndx[0], &ws_deriv[0], &ws_det_j[0], &scs_error);
else
meSCS->grad_op(1, &p_coordinates[0], &p_dndx[0], &ws_deriv[0], &ws_det_j[0], &scs_error);
for ( int ip = 0; ip < numScsIp; ++ip ) {
// setup for ip values
for ( int j = 0; j < nDim; ++j ) {
p_uIp[j] = 0.0;
p_rho_uIp[j] = 0.0;
p_GpdxIp[j] = 0.0;
p_dpdxIp[j] = 0.0;
}
double rhoIp = 0.0;
const int offSet = ip*nodesPerElement;
for ( int ic = 0; ic < nodesPerElement; ++ic ) {
const double r = p_shape_function[offSet+ic];
const double nodalPressure = p_pressure[ic];
const double nodalRho = p_density[ic];
rhoIp += r*nodalRho;
const int offSetDnDx = nDim*nodesPerElement*ip + ic*nDim;
for ( int j = 0; j < nDim; ++j ) {
p_GpdxIp[j] += r*p_Gpdx[nDim*ic+j];
p_uIp[j] += r*p_vrtm[nDim*ic+j];
p_rho_uIp[j] += r*nodalRho*p_vrtm[nDim*ic+j];
p_dpdxIp[j] += p_dndx[offSetDnDx+j]*nodalPressure;
}
}
// assemble mdot
double tmdot = 0.0;
for ( int j = 0; j < nDim; ++j ) {
tmdot += (interpTogether*p_rho_uIp[j] + om_interpTogether*rhoIp*p_uIp[j]
- projTimeScale*(p_dpdxIp[j] - p_GpdxIp[j]))*p_scs_areav[ip*nDim+j];
}
mdot[ip] = tmdot;
}
}
}
// check for edge-mdot assembly
if ( assembleMdotToEdge_ )
assemble_edge_mdot();
}
//--------------------------------------------------------------------------
//-------- execute ---------------------------------------------------------
//--------------------------------------------------------------------------
void
ComputeLowReynoldsSDRWallAlgorithm::execute()
{
stk::mesh::BulkData & bulk_data = realm_.bulk_data();
stk::mesh::MetaData & meta_data = realm_.meta_data();
const int nDim = meta_data.spatial_dimension();
// nodal fields to gather
std::vector<double> ws_density;
std::vector<double> ws_viscosity;
// master element
std::vector<double> ws_face_shape_function;
// deal with state
ScalarFieldType &densityNp1 = density_->field_of_state(stk::mesh::StateNP1);
// define vector of parent topos; should always be UNITY in size
std::vector<stk::topology> parentTopo;
// define some common selectors
stk::mesh::Selector s_locally_owned_union = meta_data.locally_owned_part()
&stk::mesh::selectUnion(partVec_);
stk::mesh::BucketVector const& face_buckets =
realm_.get_buckets( meta_data.side_rank(), s_locally_owned_union );
for ( stk::mesh::BucketVector::const_iterator ib = face_buckets.begin();
ib != face_buckets.end() ; ++ib ) {
stk::mesh::Bucket & b = **ib ;
// extract connected element topology
b.parent_topology(stk::topology::ELEMENT_RANK, parentTopo);
ThrowAssert ( parentTopo.size() == 1 );
stk::topology theElemTopo = parentTopo[0];
// extract master element
MasterElement *meSCS = realm_.get_surface_master_element(theElemTopo);
// face master element
MasterElement *meFC = realm_.get_surface_master_element(b.topology());
const int nodesPerFace = b.topology().num_nodes();
std::vector<int> face_node_ordinal_vec(nodesPerFace);
// algorithm related; element
ws_density.resize(nodesPerFace);
ws_viscosity.resize(nodesPerFace);
ws_face_shape_function.resize(nodesPerFace*nodesPerFace);
// pointers
double *p_density = &ws_density[0];
double *p_viscosity = &ws_viscosity[0];
double *p_face_shape_function = &ws_face_shape_function[0];
// shape functions
if ( useShifted_ )
meFC->shifted_shape_fcn(&p_face_shape_function[0]);
else
meFC->shape_fcn(&p_face_shape_function[0]);
const stk::mesh::Bucket::size_type length = b.size();
for ( stk::mesh::Bucket::size_type k = 0 ; k < length ; ++k ) {
// get face
stk::mesh::Entity face = b[k];
//======================================
// gather nodal data off of face
//======================================
stk::mesh::Entity const * face_node_rels = bulk_data.begin_nodes(face);
int num_face_nodes = bulk_data.num_nodes(face);
// sanity check on num nodes
ThrowAssert( num_face_nodes == nodesPerFace );
for ( int ni = 0; ni < num_face_nodes; ++ni ) {
stk::mesh::Entity node = face_node_rels[ni];
// gather scalars
p_density[ni] = *stk::mesh::field_data(densityNp1, node);
p_viscosity[ni] = *stk::mesh::field_data(*viscosity_, node);
}
// pointer to face data
const double * areaVec = stk::mesh::field_data(*exposedAreaVec_, face);
// extract the connected element to this exposed face; should be single in size!
const stk::mesh::Entity* face_elem_rels = bulk_data.begin_elements(face);
ThrowAssert( bulk_data.num_elements(face) == 1 );
// get element; its face ordinal number and populate face_node_ordinal_vec
stk::mesh::Entity element = face_elem_rels[0];
const int face_ordinal = bulk_data.begin_element_ordinals(face)[0];
theElemTopo.side_node_ordinals(face_ordinal, face_node_ordinal_vec.begin());
// get the relations off of element
stk::mesh::Entity const * elem_node_rels = bulk_data.begin_nodes(element);
// loop over face nodes
for ( int ip = 0; ip < num_face_nodes; ++ip ) {
const int offSetAveraVec = ip*nDim;
const int opposingNode = meSCS->opposingNodes(face_ordinal,ip);
const int nearestNode = face_node_ordinal_vec[ip];
// left and right nodes; right is on the face; left is the opposing node
stk::mesh::Entity nodeL = elem_node_rels[opposingNode];
stk::mesh::Entity nodeR = elem_node_rels[nearestNode];
// extract nodal fields
const double * coordL = stk::mesh::field_data(*coordinates_, nodeL );
const double * coordR = stk::mesh::field_data(*coordinates_, nodeR );
// aMag
double aMag = 0.0;
for ( int j = 0; j < nDim; ++j ) {
const double axj = areaVec[offSetAveraVec+j];
aMag += axj*axj;
}
aMag = std::sqrt(aMag);
// interpolate to bip
double rhoBip = 0.0;
double muBip = 0.0;
const int offSetSF_face = ip*nodesPerFace;
for ( int ic = 0; ic < nodesPerFace; ++ic ) {
const double r = p_face_shape_function[offSetSF_face+ic];
rhoBip += r*p_density[ic];
muBip += r*p_viscosity[ic];
}
const double nuBip = muBip/rhoBip;
// determine yp (approximated by 1/4 distance along edge)
double ypbip = 0.0;
for ( int j = 0; j < nDim; ++j ) {
const double nj = areaVec[offSetAveraVec+j]/aMag;
const double ej = 0.25*(coordR[j] - coordL[j]);
ypbip += nj*ej*nj*ej;
}
ypbip = std::sqrt(ypbip);
// compute low Re wall sdr
const double lowReSdr = wallFactor_*6.0*nuBip/betaOne_/ypbip/ypbip;
// assemble to nodal quantities; will normalize and assemble in driver
double * assembledWallArea = stk::mesh::field_data(*assembledWallArea_, nodeR );
double * sdrBc = stk::mesh::field_data(*sdrBc_, nodeR );
*assembledWallArea += aMag;
*sdrBc += lowReSdr*aMag;
}
}
}
}
