//-----------------------------------------------------------------------
Quaternion Quaternion::Exp () const
{
// If q = A*(x*i+y*j+z*k) where (x,y,z) is unit length, then
// exp(q) = cos(A)+sin(A)*(x*i+y*j+z*k). If sin(A) is near zero,
// use exp(q) = cos(A)+A*(x*i+y*j+z*k) since A/sin(A) has limit 1.
Radian fAngle ( Math::Sqrt(x*x+y*y+z*z) );
scalar fSin = Math::Sin(fAngle);
Quaternion kResult;
kResult.w = Math::Cos(fAngle);
if ( fabs(fSin) >= ms_fEpsilon )
{
scalar fCoeff = fSin/(fAngle.valueRadians());
kResult.x = fCoeff*x;
kResult.y = fCoeff*y;
kResult.z = fCoeff*z;
}
else
{
kResult.x = x;
kResult.y = y;
kResult.z = z;
}
return kResult;
}
void Camera::renderObject()
{
if(polygonMode == PM_SOLID)
glPolygonMode(GL_FRONT_AND_BACK, GL_FILL);
else if(polygonMode == PM_WIREFRAME)
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
else if(polygonMode == PM_POINTS)
glPolygonMode(GL_FRONT_AND_BACK, GL_POINT);
glLoadIdentity(); // Reset The View
// update parameters if it's tracking
if(autoTrackingEnabled && trackingTarget != NULL)
{
setOrientation(trackingTarget->getOrientation());
setPosition(trackingTarget->getPosition() + trackingOffset);
}
Radian radRotation;
WasVec3d axis;
rotation.inverse().toAngleAxis(radRotation, axis);
glRotatef(radRotation.valueDegrees(), axis.x, axis.y, axis.z);
glTranslatef(-translation[0], -translation[1], -translation[2]);
}
void KisColorSelector::mousePressEvent(QMouseEvent* event)
{
m_clickPos = mapCoord(event->posF(), m_renderArea);
m_mouseMoved = false;
m_pressedButtons = event->buttons();
m_clickedRing = getSaturationIndex(m_clickPos);
qint8 clickedLightPiece = getLightIndex(event->posF());
if (clickedLightPiece >= 0) {
setLight(getLight(event->posF()), m_relativeLight);
m_selectedLightPiece = clickedLightPiece;
setSelectedColor(m_selectedColor, !(m_pressedButtons & Qt::RightButton), true);
m_mouseMoved = true;
}
else if (m_clickedRing >= 0) {
if (getNumPieces() > 1) {
for(int i=0; i<getNumRings(); ++i)
m_colorRings[i].setTemporaries(m_selectedColor);
}
else {
Radian angle = std::atan2(m_clickPos.x(), m_clickPos.y()) - RAD_90;
m_selectedColor.setH(angle.scaled(0.0f, 1.0f));
m_selectedColor.setS(getSaturation(m_clickedRing));
m_selectedColor.setX(getLight(m_light, m_selectedColor.getH(), m_relativeLight));
setSelectedColor(m_selectedColor, !(m_pressedButtons & Qt::RightButton), true);
m_selectedRing = m_clickedRing;
m_mouseMoved = true;
update();
}
}
}
//-----------------------------------------------------------------------
bool Quaternion::equals(const Quaternion& rhs, const Radian& tolerance) const
{
Real d = Dot(rhs);
Radian angle = Math::ACos(2.0f * d*d - 1.0f);
return Math::Abs(angle.valueRadians()) <= tolerance.valueRadians();
}
// -----------------------------------------------------------------------------------------
bool CPepeEngineVector3::directionEquals(const CPepeEngineVector3& rhs, const Radian& tolerance) const
{
float dot = dotProduct(rhs);
Radian angle = CPepeEngineMath::ACos(dot);
return CPepeEngineMath::Abs(angle.valueRadians()) <= tolerance.valueRadians();
}
//-----------------------------------------------------------------------
Quaternion Quaternion::Log () const
{
// If q = cos(A)+sin(A)*(x*i+y*j+z*k) where (x,y,z) is unit length, then
// log(q) = A*(x*i+y*j+z*k). If sin(A) is near zero, use log(q) =
// sin(A)*(x*i+y*j+z*k) since sin(A)/A has limit 1.
Quaternion kResult;
kResult.w = 0.0;
if ( Math::Abs(w) < 1.0 )
{
Radian fAngle ( Math::ACos(w) );
Real fSin = Math::Sin(fAngle);
if ( Math::Abs(fSin) >= ms_fEpsilon )
{
Real fCoeff = fAngle.valueRadians()/fSin;
kResult.x = fCoeff*x;
kResult.y = fCoeff*y;
kResult.z = fCoeff*z;
return kResult;
}
}
kResult.x = x;
kResult.y = y;
kResult.z = z;
return kResult;
}
//-----------------------------------------------------------------------------
///
void ImpostorPage::update()
{
if (m_mapImpostorBatches.empty()) // SVA speed up
return;
//Calculate the direction the impostor batches should be facing
Vector3 camPos = m_pPagedGeom->_convertToLocal(m_pPagedGeom->getCamera()->getDerivedPosition());
// Update all batches
Ogre::Real distX = camPos.x - m_vecCenter.x;
Ogre::Real distZ = camPos.z - m_vecCenter.z;
Ogre::Real distY = camPos.y - m_vecCenter.y;
Ogre::Real distRelZ = Math::Sqrt(distX * distX + distZ * distZ);
Radian pitch = Math::ATan2(distY, distRelZ);
Radian yaw;
if (distRelZ > m_pPagedGeom->getPageSize() * 3)
{
yaw = Math::ATan2(distX, distZ);
}
else
{
Vector3 dir = m_pPagedGeom->_convertToLocal(m_pPagedGeom->getCamera()->getDerivedDirection());
yaw = Math::ATan2(-dir.x, -dir.z);
}
TImpostorBatchs::iterator iter = m_mapImpostorBatches.begin(), iend = m_mapImpostorBatches.end();
while (iter != iend)
{
iter->second->setAngle(pitch.valueDegrees(), yaw.valueDegrees());
++iter;
}
}
void ImpostorPage::update()
{
//Calculate the direction the impostor batches should be facing
Vector3 camPos = geom->_convertToLocal(geom->getCamera()->getDerivedPosition());
//Update all batches
float distX = camPos.x - center.x;
float distZ = camPos.z - center.z;
float distY = camPos.y - center.y;
float distRelZ = Math::Sqrt(distX * distX + distZ * distZ);
Radian pitch = Math::ATan2(distY, distRelZ);
Radian yaw;
if (distRelZ > geom->getPageSize() * 3) {
yaw = Math::ATan2(distX, distZ);
} else {
Vector3 dir = geom->_convertToLocal(geom->getCamera()->getDerivedDirection());
yaw = Math::ATan2(-dir.x, -dir.z);
}
std::map<String, ImpostorBatch *>::iterator iter;
for (iter = impostorBatches.begin(); iter != impostorBatches.end(); ++iter){
ImpostorBatch *ibatch = iter->second;
ibatch->setAngle(pitch.valueDegrees(), yaw.valueDegrees());
}
}
//-----------------------------------------------------------------------
Quaternion Quaternion::Exp () const
{
// If q = A*(x*i+y*j+z*k) where (x,y,z) is unit length, then
// exp(q) = e^w(cos(A)+sin(A)*(x*i+y*j+z*k)). If sin(A) is near zero,
// use exp(q) = e^w(cos(A)+(x*i+y*j+z*k)) since sin(A)/A has limit 1.
Radian fAngle ( Math::Sqrt(x*x+y*y+z*z) );
Real fSin = Math::Sin(fAngle);
Real fExpW = Math::Exp(w);
Quaternion kResult;
kResult.w = fExpW*Math::Cos(fAngle);
if ( Math::Abs(fAngle.valueRadians()) >= msEpsilon )
{
Real fCoeff = fExpW*(fSin/(fAngle.valueRadians()));
kResult.x = fCoeff*x;
kResult.y = fCoeff*y;
kResult.z = fCoeff*z;
}
else
{
kResult.x = fExpW*x;
kResult.y = fExpW*y;
kResult.z = fExpW*z;
}
return kResult;
}
//-----------------------------------------------------------------------
Quaternion Quaternion::Log () const
{
// If q = cos(A)+sin(A)*(x*i+y*j+z*k) where (x,y,z) is unit length, then
// log(q) = (A/sin(A))*(x*i+y*j+z*k). If sin(A) is near zero, use
// log(q) = (x*i+y*j+z*k) since A/sin(A) has limit 1.
Quaternion kResult;
kResult.w = 0.0;
if ( Math::Abs(w) < 1.0 )
{
// According to Neil Dantam, atan2 has the best stability.
// http://www.neil.dantam.name/note/dantam-quaternion.pdf
Real fNormV = Math::Sqrt(x*x + y*y + z*z);
Radian fAngle ( Math::ATan2(fNormV, w) );
Real fSin = Math::Sin(fAngle);
if ( Math::Abs(fSin) >= msEpsilon )
{
Real fCoeff = fAngle.valueRadians()/fSin;
kResult.x = fCoeff*x;
kResult.y = fCoeff*y;
kResult.z = fCoeff*z;
return kResult;
}
}
kResult.x = x;
kResult.y = y;
kResult.z = z;
return kResult;
}
//---------------------------------------------------------------------
bool NodeAnimationTrack::hasNonZeroKeyFrames(void) const
{
KeyFrameList::const_iterator i = mKeyFrames.begin();
for (; i != mKeyFrames.end(); ++i)
{
// look for keyframes which have any component which is non-zero
// Since exporters can be a little inaccurate sometimes we use a
// tolerance value rather than looking for nothing
TransformKeyFrame* kf = static_cast<TransformKeyFrame*>(*i);
Vector3 trans = kf->getTranslate();
Vector3 scale = kf->getScale();
Vector3 axis;
Radian angle;
kf->getRotation().ToAngleAxis(angle, axis);
Real tolerance = 1e-3f;
if (!trans.positionEquals(Vector3::ZERO, tolerance) ||
!scale.positionEquals(Vector3::UNIT_SCALE, tolerance) ||
!Math::RealEqual(angle.valueRadians(), 0.0f, tolerance))
{
return true;
}
}
return false;
}
//-----------------------------------------------------------------------
Quaternion Quaternion::Slerp (Real fT, const Quaternion& rkP,
const Quaternion& rkQ, bool shortestPath)
{
Real fCos = rkP.Dot(rkQ);
Radian fAngle ( Math::ACos(fCos) );
if ( Math::Abs(fAngle.valueRadians()) < ms_fEpsilon )
return rkP;
Real fSin = Math::Sin(fAngle);
Real fInvSin = 1.0/fSin;
Real fCoeff0 = Math::Sin((1.0-fT)*fAngle)*fInvSin;
Real fCoeff1 = Math::Sin(fT*fAngle)*fInvSin;
// Do we need to invert rotation?
if (fCos < 0.0f && shortestPath)
{
fCoeff0 = -fCoeff0;
// taking the complement requires renormalisation
Quaternion t(fCoeff0*rkP + fCoeff1*rkQ);
t.normalise();
return t;
}
else
{
return fCoeff0*rkP + fCoeff1*rkQ;
}
}
void assign(Quaternion<T>& quat, const Radian& roll, const Radian& pitch, const Radian& yaw) {
double angle = roll.v() * 0.5;
double sr = std::sin(angle);
double cr = std::cos(angle);
angle = pitch.v() * 0.5;
double sp = std::sin(angle);
double cp = std::cos(angle);
angle = yaw.v() * 0.5;
double sy = std::sin(angle);
double cy = std::cos(angle);
double cpcy = cp * cy;
double spcy = sp * cy;
double cpsy = cp * sy;
double spsy = sp * sy;
quat.setW(cr * cpcy + sr * spsy);
quat.setX(sr * cpcy - cr * spsy);
quat.setY(cr * spcy + sr * cpsy);
quat.setZ(cr * cpsy - sr * spcy);
normalise(quat);
}
bool Quaternion::equals(const Quaternion& rhs, const Radian& tolerance) const
{
Real fCos = Dot(rhs);
Radian angle = Math::ACos(fCos);
return (Math::Abs(angle.valueRadians()) <= tolerance.valueRadians())
|| Math::RealEqual(angle.valueRadians(), Math::PI, tolerance.valueRadians());
}
//-----------------------------------------------------------------------
void MeshParticleVisualData::setOrientation( const Radian &yaw, const Radian &pitch, const Radian &roll )
{
Quaternion yawQua(Degree(yaw.valueDegrees()), Vector3::UNIT_Y);
Quaternion pitchQua(Degree(pitch.valueDegrees()), Vector3::UNIT_X);
Quaternion rollQua(Degree(roll.valueDegrees()), Vector3::UNIT_Z);
mSceneNode->setOrientation(yawQua * pitchQua * rollQua);
}
void CameraBehaviorVehicleSpline::update(const CameraManager::CameraContext &ctx)
{
if ( ctx.mCurrTruck->free_camerarail <= 0 )
{
gEnv->cameraManager->switchToNextBehavior();
return;
}
Vector3 dir = (ctx.mCurrTruck->nodes[ctx.mCurrTruck->cameranodepos[0]].smoothpos
- ctx.mCurrTruck->nodes[ctx.mCurrTruck->cameranodedir[0]].smoothpos).normalisedCopy();
targetPitch = 0.0f;
if ( camPitching )
{
targetPitch = -asin(dir.dotProduct(Vector3::UNIT_Y));
}
if ( ctx.mCurrTruck->getAllLinkedBeams().size() != numLinkedBeams )
{
createSpline(ctx);
}
updateSpline();
updateSplineDisplay();
camLookAt = spline->interpolate(splinePos);
if ( RoR::Application::GetInputEngine()->isKeyDown(OIS::KC_LSHIFT) && RoR::Application::GetInputEngine()->isKeyDownValueBounce(OIS::KC_SPACE) )
{
autoTracking = !autoTracking;
#ifdef USE_MYGUI
if ( autoTracking )
{
RoR::Application::GetConsole()->putMessage(Console::CONSOLE_MSGTYPE_INFO, Console::CONSOLE_SYSTEM_NOTICE, _L("auto tracking enabled"), "camera_go.png", 3000);
} else
{
RoR::Application::GetConsole()->putMessage(Console::CONSOLE_MSGTYPE_INFO, Console::CONSOLE_SYSTEM_NOTICE, _L("auto tracking disabled"), "camera_go.png", 3000);
}
#endif // USE_MYGUI
}
if ( autoTracking )
{
Vector3 centerDir = ctx.mCurrTruck->getPosition() - camLookAt;
if ( centerDir.length() > 1.0f )
{
centerDir.normalise();
Radian oldTargetDirection = targetDirection;
targetDirection = -atan2(centerDir.dotProduct(Vector3::UNIT_X), centerDir.dotProduct(-Vector3::UNIT_Z));
if ( targetDirection.valueRadians() * oldTargetDirection.valueRadians() < 0.0f && centerDir.length() < camDistMin)
{
camRotX = -camRotX;
}
}
}
CameraBehaviorOrbit::update(ctx);
}
void LightRenderingParams::setParameters(const LightCore* light)
{
// Note: I could just copy the data directly to the parameter buffer if I ensured the parameter
// layout matches
Vector4 positionAndType = (Vector4)light->getPosition();
switch (light->getType())
{
case LightType::Directional:
positionAndType.w = 0;
break;
case LightType::Point:
positionAndType.w = 0.3f;
break;
case LightType::Spot:
positionAndType.w = 0.8f;
break;
}
mBuffer.gLightPositionAndType.set(positionAndType);
Vector4 colorAndIntensity;
colorAndIntensity.x = light->getColor().r;
colorAndIntensity.y = light->getColor().g;
colorAndIntensity.z = light->getColor().b;
colorAndIntensity.w = light->getIntensity();
mBuffer.gLightColorAndIntensity.set(colorAndIntensity);
Radian spotAngle = Math::clamp(light->getSpotAngle() * 0.5f, Degree(1), Degree(90));
Radian spotFalloffAngle = Math::clamp(light->getSpotFalloffAngle() * 0.5f, Degree(1), (Degree)spotAngle);
Vector4 spotAnglesAndInvSqrdRadius;
spotAnglesAndInvSqrdRadius.x = spotAngle.valueRadians();
spotAnglesAndInvSqrdRadius.y = Math::cos(spotAnglesAndInvSqrdRadius.x);
spotAnglesAndInvSqrdRadius.z = 1.0f / (Math::cos(spotFalloffAngle) - spotAnglesAndInvSqrdRadius.y);
spotAnglesAndInvSqrdRadius.w = 1.0f / (light->getBounds().getRadius() * light->getBounds().getRadius());
mBuffer.gLightSpotAnglesAndSqrdInvRadius.set(spotAnglesAndInvSqrdRadius);
mBuffer.gLightDirection.set(-light->getRotation().zAxis());
Vector4 lightGeometry;
lightGeometry.x = light->getType() == LightType::Spot ? (float)LightCore::LIGHT_CONE_NUM_SIDES : 0;
lightGeometry.y = (float)LightCore::LIGHT_CONE_NUM_SLICES;
lightGeometry.z = light->getBounds().getRadius();
float coneRadius = Math::sin(spotAngle) * light->getRange();
lightGeometry.w = coneRadius;
mBuffer.gLightGeometry.set(lightGeometry);
Matrix4 transform = Matrix4::TRS(light->getPosition(), light->getRotation(), Vector3::ONE);
mBuffer.gMatConeTransform.set(transform);
mBuffer.flushToGPU();
}
// -----------------------------------------------------------------------------------------
bool CPepeEngineQuaternion::equals(const CPepeEngineQuaternion& rhs, const Radian& tolerance) const
{
float fCos = dot(rhs);
Radian angle = CPepeEngineMath::ACos(fCos);
return (CPepeEngineMath::Abs(angle.valueRadians()) <= tolerance.valueRadians()) || CPepeEngineMath::floatEqual(angle.valueRadians(), CPepeEngineMath::PI, tolerance.valueRadians());
}
void KisColorSelector::mouseMoveEvent(QMouseEvent* event)
{
QPointF dragPos = mapCoord(event->posF(), m_renderArea);
qint8 clickedLightPiece = getLightIndex(event->posF());
if (clickedLightPiece >= 0) {
setLight(getLight(event->posF()), m_relativeLight);
m_selectedLightPiece = clickedLightPiece;
setSelectedColor(m_selectedColor, m_selectedColorIsFgColor, true);
}
if (m_clickedRing < 0)
return;
if (getNumPieces() > 1) {
float angle = std::atan2(dragPos.x(), dragPos.y()) - std::atan2(m_clickPos.x(), m_clickPos.y());
float dist = std::sqrt(dragPos.x()*dragPos.x() + dragPos.y()*dragPos.y()) * 0.80f;
float threshold = 5.0f * (1.0f-(dist*dist));
if (qAbs(angle * TO_DEG) >= threshold || m_mouseMoved) {
bool selectedRingMoved = true;
if (m_pressedButtons & Qt::RightButton) {
selectedRingMoved = m_clickedRing == m_selectedRing;
m_colorRings[m_clickedRing].angle = m_colorRings[m_clickedRing].tmpAngle + angle;
}
else for(int i=0; i<getNumRings(); ++i)
m_colorRings[i].angle = m_colorRings[i].tmpAngle + angle;
if (selectedRingMoved) {
KisColor color = m_colorRings[m_clickedRing].tmpColor;
Radian angle = m_colorRings[m_clickedRing].getMovedAngel() + (color.getH()*PI2);
color.setH(angle.scaled(0.0f, 1.0f));
color.setX(getLight(m_light, color.getH(), m_relativeLight));
m_selectedPiece = getHueIndex(angle, m_colorRings[m_clickedRing].getShift());
setSelectedColor(color, m_selectedColorIsFgColor, true);
}
m_mouseMoved = true;
}
}
else {
Radian angle = std::atan2(dragPos.x(), dragPos.y()) - RAD_90;
m_selectedColor.setH(angle.scaled(0.0f, 1.0f));
m_selectedColor.setX(getLight(m_light, m_selectedColor.getH(), m_relativeLight));
setSelectedColor(m_selectedColor, m_selectedColorIsFgColor, true);
}
update();
}
void DemoApplication::SmoothCamera::Move (Real deltaTranslation, Real deltaStrafe, Radian pitchAngleStep, Radian yawAngleStep)
{
// here we update the camera movement at simulation rate
m_cameraYawAngle = fmodf (m_cameraYawAngle.valueRadians() + yawAngleStep.valueRadians(), 3.141592f * 2.0f);
m_cameraPitchAngle = Math::Clamp (m_cameraPitchAngle.valueRadians() + pitchAngleStep.valueRadians(), - 80.0f * 3.141592f / 180.0f, 80.0f * 3.141592f / 180.0f);
Matrix3 rot;
rot.FromEulerAnglesZYX (Radian (0.0f), m_cameraYawAngle, m_cameraPitchAngle);
Matrix4 matrix (rot);
m_cameraTranslation += Vector3 (matrix[0][2], matrix[1][2], matrix[2][2]) * deltaTranslation;
m_cameraTranslation += Vector3 (matrix[0][0], matrix[1][0], matrix[2][0]) * deltaStrafe;
matrix.setTrans(m_cameraTranslation);
matrix = matrix.transpose();
Update (matrix[0]);
}
//-----------------------------------------------------------------------
Quaternion Quaternion::SlerpExtraSpins (Real fT,
const Quaternion& rkP, const Quaternion& rkQ, int iExtraSpins)
{
Real fCos = rkP.Dot(rkQ);
Radian fAngle ( Math::ACos(fCos) );
if ( Math::Abs(fAngle.valueRadians()) < msEpsilon )
return rkP;
Real fSin = Math::Sin(fAngle);
Radian fPhase ( Math::PI*iExtraSpins*fT );
Real fInvSin = 1.0f/fSin;
Real fCoeff0 = Math::Sin((1.0f-fT)*fAngle - fPhase)*fInvSin;
Real fCoeff1 = Math::Sin(fT*fAngle + fPhase)*fInvSin;
return fCoeff0*rkP + fCoeff1*rkQ;
}
TEST(RadianTest, ConstructTest)
{
Radian r;
EXPECT_EQ(0.0f, r.GetRadian());
Radian r2(3.14f);
EXPECT_EQ(3.14f, r2.GetRadian());
// Copy construct
Radian r3(r);
EXPECT_EQ(r.GetRadian(), r3.GetRadian());
// Assignment
Radian r4 = r;
EXPECT_EQ(r.GetRadian(), r4.GetRadian());
}
//---------------------------------------------------------------------
void XMLSkeletonSerializer::writeBone(TiXmlElement* bonesElement, const Bone* pBone)
{
TiXmlElement* boneElem =
bonesElement->InsertEndChild(TiXmlElement("bone"))->ToElement();
// Bone name & handle
boneElem->SetAttribute("id",
StringConverter::toString(pBone->getHandle()));
boneElem->SetAttribute("name", pBone->getName());
// Position
TiXmlElement* subNode =
boneElem->InsertEndChild(TiXmlElement("position"))->ToElement();
Vector3 pos = pBone->getPosition();
subNode->SetAttribute("x", StringConverter::toString(pos.x));
subNode->SetAttribute("y", StringConverter::toString(pos.y));
subNode->SetAttribute("z", StringConverter::toString(pos.z));
// Orientation
subNode =
boneElem->InsertEndChild(TiXmlElement("rotation"))->ToElement();
// Show Quaternion as angle / axis
Radian angle;
Vector3 axis;
pBone->getOrientation().ToAngleAxis(angle, axis);
TiXmlElement* axisNode =
subNode->InsertEndChild(TiXmlElement("axis"))->ToElement();
subNode->SetAttribute("angle", StringConverter::toString(angle.valueRadians()));
axisNode->SetAttribute("x", StringConverter::toString(axis.x));
axisNode->SetAttribute("y", StringConverter::toString(axis.y));
axisNode->SetAttribute("z", StringConverter::toString(axis.z));
// Scale optional
Vector3 scale = pBone->getScale();
if (scale != Vector3::UNIT_SCALE)
{
TiXmlElement* scaleNode =
boneElem->InsertEndChild(TiXmlElement("scale"))->ToElement();
scaleNode->SetAttribute("x", StringConverter::toString(scale.x));
scaleNode->SetAttribute("y", StringConverter::toString(scale.y));
scaleNode->SetAttribute("z", StringConverter::toString(scale.z));
}
}
void assign(Quaternion<T>& quat, const Vector3f& axis, const Radian& angle) {
double sinA = std::sin(angle.v());
double cosA = std::cos(angle.v());
quat.setW(cosA);
quat.setX(axis.x() * sinA);
quat.setY(axis.y() * sinA);
quat.setZ(axis.z() * sinA);
}
void
mat3::makeTransform(const vec2& pos, const vec2& scale, const Radian& rot)
{
if (pos == vec2::zero && scale == vec2(1,1) && rot == Radian::zero) {
*this = identity;
return;
}
m[0][0] = std::cos(rot.radians()) * scale.x;
m[0][1] = -std::sin(rot.radians()) * scale.y;
m[0][2] = pos.x;
m[1][0] = std::sin(rot.radians()) * scale.x;
m[1][1] = std::cos(rot.radians()) * scale.y;
m[1][2] = pos.y;
m[2][0] = 0;
m[2][1] = 0;
m[2][2] = 1;
}
//---------------------------------------------------------------------
void XMLSkeletonSerializer::writeKeyFrame(TiXmlElement* keysNode,
const TransformKeyFrame* key)
{
TiXmlElement* keyNode =
keysNode->InsertEndChild(TiXmlElement("keyframe"))->ToElement();
keyNode->SetAttribute("time", StringConverter::toString(key->getTime()));
TiXmlElement* transNode =
keyNode->InsertEndChild(TiXmlElement("translate"))->ToElement();
Vector3 trans = key->getTranslate();
transNode->SetAttribute("x", StringConverter::toString(trans.x));
transNode->SetAttribute("y", StringConverter::toString(trans.y));
transNode->SetAttribute("z", StringConverter::toString(trans.z));
TiXmlElement* rotNode =
keyNode->InsertEndChild(TiXmlElement("rotate"))->ToElement();
// Show Quaternion as angle / axis
Radian angle;
Vector3 axis;
key->getRotation().ToAngleAxis(angle, axis);
TiXmlElement* axisNode =
rotNode->InsertEndChild(TiXmlElement("axis"))->ToElement();
rotNode->SetAttribute("angle", StringConverter::toString(angle.valueRadians()));
axisNode->SetAttribute("x", StringConverter::toString(axis.x));
axisNode->SetAttribute("y", StringConverter::toString(axis.y));
axisNode->SetAttribute("z", StringConverter::toString(axis.z));
// Scale optional
if (key->getScale() != Vector3::UNIT_SCALE)
{
TiXmlElement* scaleNode =
keyNode->InsertEndChild(TiXmlElement("scale"))->ToElement();
scaleNode->SetAttribute("x", StringConverter::toString(key->getScale().x));
scaleNode->SetAttribute("y", StringConverter::toString(key->getScale().y));
scaleNode->SetAttribute("z", StringConverter::toString(key->getScale().z));
}
}
//-----------------------------------------------------------------------
Quaternion Quaternion::Slerp(Real fT, const Quaternion& rkP,
const Quaternion& rkQ, bool shortestPath)
{
Real fCos = rkP.Dot(rkQ);
Quaternion rkT;
// 需要翻转旋转？
if (fCos < 0.0f && shortestPath)
{
fCos = -fCos;
rkT = -rkQ;
}
else
{
rkT = rkQ;
}
if (Math::Abs(fCos) < 1 - msEpsilon)
{
// 正常情况 (slerp)
Real fSin = Math::Sqrt(1 - Math::Sqr(fCos));
Radian fAngle = Math::ATan2(fSin, fCos);
Real fInvSin = 1.0f / fSin;
Real fCoeff0 = Math::Sin((1.0f - fT) * fAngle.valueRadians()) * fInvSin;
Real fCoeff1 = Math::Sin(fT * fAngle.valueRadians()) * fInvSin;
return fCoeff0 * rkP + fCoeff1 * rkT;
}
else
{
// 这有两种情况
// 1. "rkP" 和 "rkQ" 是非常接近(fCos ~= +1), 所以我们能做安全的做线性插值
// 2. "rkP" 和 "rkQ" 几乎是每一个 (fCos ~= -1)的反转，这就有无数种插值的可能性。但是我们不可能有修正这个问题的方法，
// 所有就在这里用线性插值
Quaternion t = (1.0f - fT) * rkP + fT * rkT;
// 使这个分量重新标准化
t.normalise();
return t;
}
}
void KisColorSelector::mouseReleaseEvent(QMouseEvent* /*event*/)
{
if (!m_mouseMoved && m_clickedRing >= 0) {
Radian angle = std::atan2(m_clickPos.x(), m_clickPos.y()) - RAD_90;
m_selectedRing = m_clickedRing;
m_selectedPiece = getHueIndex(angle, m_colorRings[m_clickedRing].getShift());
if (getNumPieces() > 1)
m_selectedColor.setH(getHue(m_selectedPiece, m_colorRings[m_clickedRing].getShift()));
else
m_selectedColor.setH(angle.scaled(0.0f, 1.0f));
m_selectedColor.setS(getSaturation(m_selectedRing));
m_selectedColor.setX(getLight(m_light, m_selectedColor.getH(), m_relativeLight));
setSelectedColor(m_selectedColor, !(m_pressedButtons & Qt::RightButton));
}
else if (m_mouseMoved)
setSelectedColor(m_selectedColor, m_selectedColorIsFgColor);
m_clickedRing = -1;
update();
}
//-----------------------------------------------------------------------
void Quaternion::FromAngleAxis(const Radian& rfAngle,
const Vector3& rkAxis)
{
// 断言: axis[] 是单位长度
//
// 这个四元数表示的旋转是
// q = cos(A/2)+sin(A/2)*(x*i+y*j+z*k)
Radian fHalfAngle(0.5*rfAngle.valueRadians());
Real fSin = Math::Sin(fHalfAngle);
w = Math::Cos(fHalfAngle);
x = fSin*rkAxis.x;
y = fSin*rkAxis.y;
z = fSin*rkAxis.z;
}
inline void wrapAngle(Radian& angle) {
Real rangle = angle.valueRadians();
if (rangle < -Math::PI) {
rangle = fmod(rangle, -Math::TWO_PI);
if (rangle < -Math::PI) {
rangle += Math::TWO_PI;
}
angle = rangle;
mChanged = true;
} else if (rangle > Math::PI) {
rangle = fmod(rangle, Math::TWO_PI);
if (rangle > Math::PI) {
rangle -= Math::TWO_PI;
}
angle = rangle;
mChanged = true;
}
}
