void EffectSilence::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay();
{
S.AddPrompt(_("Duration:"));
mDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDurationT->SetName(_("Duration"));
mDurationT->EnableMenu();
S.AddWindow(mDurationT, wxALIGN_CENTER | wxALL);
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
return;
}
void EffectNoise::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(nTypes == WXSIZEOF(kTypeStrings));
S.StartMultiColumn(2, wxCENTER);
{
auto typeChoices = LocalizedStrings(kTypeStrings, nTypes);
S.AddChoice(_("Noise type:"), wxT(""), &typeChoices)->SetValidator(wxGenericValidator(&mType));
FloatingPointValidator<double> vldAmp(6, &mAmp, NumValidatorStyle::NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amp, MAX_Amp);
S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mNoiseDurationT = safenew
NumericTextCtrl(S.GetParent(), wxID_ANY,
NumericConverter::TIME,
GetDurationFormat(),
GetDuration(),
mProjectRate,
NumericTextCtrl::Options{}
.AutoPos(true));
mNoiseDurationT->SetName(_("Duration"));
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
/// Populates simple dialog that has a single tone.
void ToneGenDialog::PopulateOrExchangeStandard( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Waveform") + wxString(wxT(":")), waveform, waveforms);
S.SetSizeHints(-1, -1);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Frequency (Hz)") + wxString(wxT(":")), frequency[0], 5);
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), amplitude[0], 5);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mToneDurationT == NULL)
{
mToneDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
mDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->SetFormatString(mToneDurationT->GetBuiltinFormat(isSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mToneDurationT->EnableMenu();
}
S.AddWindow(mToneDurationT);
}
S.EndMultiColumn();
}
void TimeDialog::PopulateOrExchange(ShuttleGui &S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
S.StartStatic(mPrompt, true);
{
mTimeCtrl = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
mTime,
mRate,
wxDefaultPosition,
wxDefaultSize,
true);
mTimeCtrl->SetName(mPrompt);
mTimeCtrl->SetFormatString(mTimeCtrl->GetBuiltinFormat(mFormat));
S.AddWindow(mTimeCtrl);
mTimeCtrl->EnableMenu();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
TransferDataToWindow();
Layout();
Fit();
SetMinSize(GetSize());
Center();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Noise type:"), nType, nTypeList);
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), nAmplitude, 10);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
NumericTextCtrl(NumericConverter::TIME, this,
wxID_ANY,
wxT(""),
nDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duration"), false);
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT);
S.TieTextBox(_("Amplitude (0-1)"), nAmplitude, 10);
S.TieChoice(_("Noise type"), nType, nTypeList);
S.SetSizeHints(-1, -1);
}
S.EndMultiColumn();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieChoice(_("Noise type") + wxString(wxT(":")), nType, nTypeList);
S.TieTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), nAmplitude, 10);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void EffectNoise::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
S.StartMultiColumn(2, wxCENTER);
{
S.AddChoice(_("Noise type:"), wxT(""), &typeChoices)->SetValidator(wxGenericValidator(&mType));
FloatingPointValidator<double> vldAmp(6, &mAmp, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amp, MAX_Amp);
S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mNoiseDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->EnableMenu();
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void EffectDtmf::PopulateOrExchange(ShuttleGui & S)
{
// dialog will be passed values from effect
// Effect retrieves values from saved config
// Dialog will take care of using them to initialize controls
// If there is a selection, use that duration, otherwise use
// value from saved config: this is useful is user wants to
// replace selection with dtmf sequence
S.AddSpace(0, 5);
S.StartMultiColumn(2, wxCENTER);
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST, &dtmfSequence);
vldDtmf.SetIncludes(wxArrayString(WXSIZEOF(kSymbols), kSymbols));
mDtmfSequenceT = S.Id(ID_Sequence).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfSequenceT->SetValidator(vldDtmf);
FloatingPointValidator<double> vldAmp(3, &dtmfAmplitude, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amplitude, MAX_Amplitude);
S.Id(ID_Amplitude).AddTextBox(_("Amplitude (0-1):"), wxT(""), 10)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mDtmfDurationT = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_Duration,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->EnableMenu();
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyCycleS = S.Id(ID_DutyCycle).AddSlider( {},
dtmfDutyCycle * SCL_DutyCycle,
MAX_DutyCycle * SCL_DutyCycle,
MIN_DutyCycle * SCL_DutyCycle);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.AddVariableText(wxString::Format(wxT("%.1f %%"), dtmfDutyCycle), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.AddVariableText(wxString::Format(wxString(wxT("%.0f ")) + _("ms"), dtmfTone * 1000.0), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.AddVariableText(wxString::Format(wxString(wxT("%0.f ")) + _("ms"), dtmfSilence * 1000.0), false);
}
S.EndMultiColumn();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), dAmplitude, 10);
S.AddPrompt(_("Duration:"));
if (mDtmfDurationT == NULL)
{
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
wxT(""),
dDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to the
* effect, I want it (dDuration) to be used as the duration, and with
* "seconds" this does not always work properly. For example, it rounds
* down to zero... */
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
mDtmfDurationT->EnableMenu();
}
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartHorizontalLay(wxALIGN_CENTRE, false);
{
S.Id(CategoryID);
mCat = S.AddChoice(_("C&ategory:"),
mCats[0],
&mCats);
}
S.EndHorizontalLay();
mList = S.Id(CommandsListID).AddListControlReportMode();
mList->SetName(_("Key Bindings"));
S.StartThreeColumn();
{
if (!mKey) {
mKey = new wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1));
#else
wxSize(210, -1));
#endif
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnCaptureKeyDown));
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnCaptureChar));
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
S.Id(SetButtonID).AddButton(_("Set"));
S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(20, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura (2006)"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
S.AddPrompt(_("DTMF duration:"));
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
/*
use this instead of "seconds" because if a selection is passed to the effect,
I want it (dDuration) to be used as the duration, and with "seconds" this does
not always work properly. For example, it rounds down to zero...
*/
TimeTextCtrl::GetBuiltinFormat(dIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))),
dDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
S.AddWindow(mDtmfDurationT);
mDtmfDurationT->EnableMenu();
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX);
mDtmfDutyS->SetRange(DUTY_MIN, DUTY_MAX);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange( ShuttleGui & S )
{
S.StartStatic( _("Key Bindings"), 1 );
mList = S.Id( CommandsListID ).AddListControlReportMode();
S.StartHorizontalLay( wxALIGN_LEFT, 0);
{
// LLL: Moved here from Populate. On the Mac, the control
// would not accept focus when using the mouse, but it
// would when tabbing to the field. Not really sure
// why...just glad it works now. :-)
// The SysKeyText ctrl is so special that we aren't
// going to include it into Audacity's version of ShuttleGui.
// So instead we create it here, and we can add it into
// the sizer scheme later...
mCurrentComboText = new SysKeyTextCtrl(
this, CurrentComboID, wxT(""),
wxDefaultPosition, wxSize(115, -1), 0 );
// AddWindow is a generic 'Add' for ShuttleGui.
// It allows us to add 'foreign' controls.
S.AddWindow( mCurrentComboText )->MoveAfterInTabOrder( mList );
S.Id( SetButtonID ).AddButton( _("S&et"));
S.Id( ClearButtonID ).AddButton( _("&Clear"));
}
S.EndHorizontalLay();
#ifdef __WXMAC__
S.AddFixedText( _("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartHorizontalLay( wxALIGN_LEFT, 0);
{
S.Id( AssignDefaultsButtonID ).AddButton( _("&Defaults"));
S.Id( SaveButtonID ).AddButton( _("&Save..."));
S.Id( LoadButtonID ).AddButton( _("&Load..."));
}
S.EndHorizontalLay();
S.EndStatic();
return;
}
void ExtImportPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.TieCheckBox(_("Attempt to use filter in OpenFile dialog first"),
wxT("/ExtendedImport/OverrideExtendedImportByOpenFileDialogChoice"),
true);
S.StartStatic(_("Rules to choose import filters"), 1);
{
S.SetSizerProportion(1);
S.StartHorizontalLay (wxEXPAND, 1);
{
bool fillRuleTable = false;
if (RuleTable == NULL)
{
RuleTable = new Grid(S.GetParent(),EIPRuleTable);
RuleTable->SetColLabelSize(RuleTable->GetDefaultRowSize());
#if EXTIMPORT_MIME_SUPPORT
RuleTable->CreateGrid (0, 2, wxGrid::wxGridSelectRows);
#else
RuleTable->CreateGrid (0, 1, wxGrid::wxGridSelectRows);
#endif
RuleTable->DisableDragColMove ();
RuleTable->DisableDragRowSize ();
RuleTable->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
RuleTable->SetColLabelValue (0, _("File extensions"));
#if EXTIMPORT_MIME_SUPPORT
RuleTable->SetColLabelValue (1, _("Mime-types"));
#endif
RuleTable->SetRowLabelSize (0);
RuleTable->SetSelectionMode (wxGrid::wxGridSelectRows);
RuleTable->AutoSizeColumns ();
RuleTable->SetDropTarget (dragtarget1);
RuleTable->EnableDragCell (true);
fillRuleTable = true;
}
S.AddWindow(RuleTable, wxEXPAND | wxALL);
PluginList = S.Id(EIPPluginList).AddListControl ();
if (fillRuleTable)
{
PluginList->SetSingleStyle (wxLC_REPORT, true);
PluginList->SetSingleStyle (wxLC_SINGLE_SEL, true);
PluginList->InsertColumn (0, _("Importer order"));
PluginList->SetDropTarget (dragtarget2);
ExtImportItems *items = wxGetApp().mImporter->GetImportItems();
for (unsigned int i = 0; i < items->Count(); i++)
AddItemToTable (i, &(*items)[i]);
if (items->Count() > 0)
{
RuleTable->SelectRow(0);
RuleTable->SetGridCursor(0,0);
}
}
}
S.EndHorizontalLay();
S.StartHorizontalLay (wxSHRINK, 0);
{
MoveRuleUp = S.Id (EIPMoveRuleUp).AddButton (_("Move rule &up"));
MoveRuleDown = S.Id (EIPMoveRuleDown).AddButton
(_("Move rule &down"));
MoveFilterUp = S.Id (EIPMoveFilterUp).AddButton
(_("Move f&ilter up"));
MoveFilterDown = S.Id (EIPMoveFilterDown).AddButton
(_("Move &filter down"));
}
S.EndHorizontalLay();
S.StartHorizontalLay (wxSHRINK, 0);
{
AddRule = S.Id (EIPAddRule).AddButton (_("&Add new rule"));
DelRule = S.Id (EIPDelRule).AddButton (_("De&lete selected rule"));
}
S.EndHorizontalLay();
}
S.EndStatic();
Layout();
Fit();
SetMinSize(GetSize());
}
void EffectAutoDuck::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
S.AddSpace(0, 5);
mPanel = safenew EffectAutoDuckPanel(S.GetParent(), this);
S.AddWindow(mPanel);
S.AddSpace(0, 5);
S.StartMultiColumn(6, wxCENTER);
{
FloatingPointValidator<double> vldDuckAmountDb(1, &mDuckAmountDb, NUM_VAL_NO_TRAILING_ZEROES);
vldDuckAmountDb.SetRange(MIN_DuckAmountDb, MAX_DuckAmountDb);
mDuckAmountDbBox = S.AddTextBox(_("Duck amount:"), wxT(""), 10);
mDuckAmountDbBox->SetValidator(vldDuckAmountDb);
S.AddUnits(_("dB"));
FloatingPointValidator<double> vldMaximumPause(2, &mMaximumPause, NUM_VAL_NO_TRAILING_ZEROES);
vldMaximumPause.SetRange(MIN_MaximumPause, MAX_MaximumPause);
mMaximumPauseBox = S.AddTextBox(_("Maximum pause:"), wxT(""), 10);
mMaximumPauseBox->SetValidator(vldMaximumPause);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldOuterFadeDownLen(2, &mOuterFadeDownLen, NUM_VAL_NO_TRAILING_ZEROES);
vldOuterFadeDownLen.SetRange(MIN_OuterFadeDownLen, MAX_OuterFadeDownLen);
mOuterFadeDownLenBox = S.AddTextBox(_("Outer fade down length:"), wxT(""), 10);
mOuterFadeDownLenBox->SetValidator(vldOuterFadeDownLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldOuterFadeUpLen(2, &mOuterFadeUpLen, NUM_VAL_NO_TRAILING_ZEROES);
vldOuterFadeUpLen.SetRange(MIN_OuterFadeUpLen, MAX_OuterFadeUpLen);
mOuterFadeUpLenBox = S.AddTextBox(_("Outer fade up length:"), wxT(""), 10);
mOuterFadeUpLenBox->SetValidator(vldOuterFadeUpLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldInnerFadeDownLen(2, &mInnerFadeDownLen, NUM_VAL_NO_TRAILING_ZEROES);
vldInnerFadeDownLen.SetRange(MIN_InnerFadeDownLen, MAX_InnerFadeDownLen);
mInnerFadeDownLenBox = S.AddTextBox(_("Inner fade down length:"), wxT(""), 10);
mInnerFadeDownLenBox->SetValidator(vldInnerFadeDownLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldInnerFadeUpLen(2, &mInnerFadeUpLen, NUM_VAL_NO_TRAILING_ZEROES);
vldInnerFadeUpLen.SetRange(MIN_InnerFadeUpLen, MAX_InnerFadeUpLen);
mInnerFadeUpLenBox = S.AddTextBox(_("Inner fade up length:"), wxT(""), 10);
mInnerFadeUpLenBox->SetValidator(vldInnerFadeUpLen);
S.AddUnits(_("seconds"));
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxCENTER);
{
FloatingPointValidator<double> vldThresholdDb(2, &mThresholdDb, NUM_VAL_NO_TRAILING_ZEROES);
vldThresholdDb.SetRange(MIN_ThresholdDb, MAX_ThresholdDb);
mThresholdDbBox = S.AddTextBox(_("Threshold:"), wxT(""), 10);
mThresholdDbBox->SetValidator(vldThresholdDb);
S.AddUnits(_("dB"));
}
S.EndMultiColumn();
}
S.EndVerticalLay();
return;
}
void TimerRecordDialog::PopulateOrExchange(ShuttleGui& S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
/* i18n-hint: This string is used to configure the controls for times when the recording is
* started and stopped. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The 'h' indicates the first number displayed is hours, the 'm' indicates the second number
* displayed is minutes, and the 's' indicates that the third number displayed is seconds.
*/
wxString strFormat = _("099 h 060 m 060 s");
S.StartStatic(_("Start Date and Time"), true);
{
m_pDatePickerCtrl_Start =
new wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_START, // wxWindowID id,
m_DateTime_Start); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_Start->SetName(_("Start Date"));
m_pDatePickerCtrl_Start->SetRange(wxDateTime::Today(), wxInvalidDateTime); // No backdating.
S.AddWindow(m_pDatePickerCtrl_Start);
m_pTimeTextCtrl_Start = new TimeTextCtrl(this, ID_TIMETEXT_START);
m_pTimeTextCtrl_Start->SetName(_("Start Time"));
m_pTimeTextCtrl_Start->SetFormatString(strFormat);
m_pTimeTextCtrl_Start->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_Start));
S.AddWindow(m_pTimeTextCtrl_Start);
m_pTimeTextCtrl_Start->EnableMenu(false);
}
S.EndStatic();
S.StartStatic(_("End Date and Time"), true);
{
m_pDatePickerCtrl_End =
new wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_END, // wxWindowID id,
m_DateTime_End); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_End->SetRange(m_DateTime_Start, wxInvalidDateTime); // No backdating.
m_pDatePickerCtrl_End->SetName(_("End Date"));
S.AddWindow(m_pDatePickerCtrl_End);
m_pTimeTextCtrl_End = new TimeTextCtrl(this, ID_TIMETEXT_END);
m_pTimeTextCtrl_End->SetName(_("End Time"));
m_pTimeTextCtrl_End->SetFormatString(strFormat);
m_pTimeTextCtrl_End->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_End));
S.AddWindow(m_pTimeTextCtrl_End);
m_pTimeTextCtrl_End->EnableMenu(false);
}
S.EndStatic();
S.StartStatic(_("Duration"), true);
{
/* i18n-hint: This string is used to configure the controls which shows the recording
* duration. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The string 'days' indicates that the first number in the control will be the number of days,
* then the 'h' indicates the second number displayed is hours, the 'm' indicates the third
* number displayed is minutes, and the 's' indicates that the fourth number displayed is
* seconds.
*/
wxString strFormat1 = _("099 days 024 h 060 m 060 s");
m_pTimeTextCtrl_Duration = new TimeTextCtrl(this, ID_TIMETEXT_DURATION);
m_pTimeTextCtrl_Duration->SetName(_("Duration"));
m_pTimeTextCtrl_Duration->SetFormatString(strFormat1);
m_pTimeTextCtrl_Duration->SetTimeValue(m_TimeSpan_Duration.GetSeconds().ToDouble());
S.AddWindow(m_pTimeTextCtrl_Duration);
m_pTimeTextCtrl_Duration->EnableMenu(false);
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
Layout();
Fit();
SetMinSize(GetSize());
Center();
}
void TimerRecordDialog::PopulateOrExchange(ShuttleGui& S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
wxString strFormat = wxT("099 h 060 m 060 s");
S.StartStatic(_("Start Date and Time"), true);
{
m_pDatePickerCtrl_Start =
new wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_START, // wxWindowID id,
m_DateTime_Start); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_Start->SetName(_("Start Date"));
m_pDatePickerCtrl_Start->SetRange(wxDateTime::Today(), wxInvalidDateTime); // No backdating.
S.AddWindow(m_pDatePickerCtrl_Start);
m_pTimeTextCtrl_Start = new TimeTextCtrl(this, ID_TIMETEXT_START, strFormat);
m_pTimeTextCtrl_Start->SetName(_("Start Time"));
m_pTimeTextCtrl_Start->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_Start));
S.AddWindow(m_pTimeTextCtrl_Start);
m_pTimeTextCtrl_Start->EnableMenu(false);
}
S.EndStatic();
S.StartStatic(_("End Date and Time"), true);
{
m_pDatePickerCtrl_End =
new wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_END, // wxWindowID id,
m_DateTime_End); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_End->SetRange(m_DateTime_Start, wxInvalidDateTime); // No backdating.
m_pDatePickerCtrl_End->SetName(_("End Date"));
S.AddWindow(m_pDatePickerCtrl_End);
m_pTimeTextCtrl_End = new TimeTextCtrl(this, ID_TIMETEXT_END, strFormat);
m_pTimeTextCtrl_End->SetName(_("End Time"));
m_pTimeTextCtrl_End->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_End));
S.AddWindow(m_pTimeTextCtrl_End);
m_pTimeTextCtrl_End->EnableMenu(false);
}
S.EndStatic();
S.StartStatic(_("Duration"), true);
{
wxString strFormat1 = wxT("099 days 024 h 060 m 060 s");
m_pTimeTextCtrl_Duration = new TimeTextCtrl(this, ID_TIMETEXT_DURATION, strFormat1);
m_pTimeTextCtrl_Duration->SetName(_("Duration"));
m_pTimeTextCtrl_Duration->SetTimeValue(
Internat::CompatibleToDouble(m_TimeSpan_Duration.GetSeconds().ToString())); //v milliseconds?
S.AddWindow(m_pTimeTextCtrl_Duration);
m_pTimeTextCtrl_Duration->EnableMenu(false);
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
Layout();
Fit();
SetMinSize(GetSize());
Center();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.StartHorizontalLay(wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL, 0);
{
S.AddTitle(_("View by:"));
S.StartRadioButtonGroup(wxT("/Prefs/KeyConfig/ViewBy"), wxT("tree"));
{
mViewByTree = S.Id(ViewByTreeID).TieRadioButton(_("&Tree"), wxT("tree"));
mViewByTree->SetName(_("View by tree"));
mViewByName = S.Id(ViewByNameID).TieRadioButton(_("&Name"), wxT("name"));
mViewByName->SetName(_("View by name"));
mViewByKey = S.Id(ViewByKeyID).TieRadioButton(_("&Key"), wxT("key"));
mViewByKey->SetName(_("View by key"));
}
S.EndRadioButtonGroup();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_CENTER|wxALIGN_CENTER_VERTICAL, 0);
{
// just a spacer
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 0);
{
mFilterLabel = S.AddVariableText(_("Searc&h:"));
if (!mFilter) {
mFilter = safenew wxTextCtrl(this,
FilterID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mFilter->SetName(wxStripMenuCodes(mFilterLabel->GetLabel()));
mFilter->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnFilterKeyDown),
NULL,
this);
mFilter->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnFilterChar),
NULL,
this);
}
S.AddWindow(mFilter, wxALIGN_NOT | wxALIGN_LEFT);
}
S.EndHorizontalLay();
}
S.EndThreeColumn();
S.AddSpace(-1, 2);
S.StartHorizontalLay(wxEXPAND, 1);
{
if (!mView) {
mView = safenew KeyView(this, CommandsListID);
mView->SetName(_("Bindings"));
}
S.Prop(true);
S.AddWindow(mView, wxEXPAND);
}
S.EndHorizontalLay();
S.StartThreeColumn();
{
if (!mKey) {
mKey = safenew wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mKey->SetName(_("Short cut"));
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyKeyDown),
NULL,
this);
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyChar),
NULL,
this);
mKey->Connect(wxEVT_KILL_FOCUS,
wxFocusEventHandler(KeyConfigPrefs::OnHotkeyKillFocus),
NULL,
this);
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
mSet = S.Id(SetButtonID).AddButton(_("&Set"));
mClear = S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
S.EndStatic();
// Need to layout so that the KeyView is properly sized before populating.
// Otherwise, the initial selection is not scrolled into view.
Layout();
}
void EffectToneGen::PopulateOrExchange(ShuttleGui & S)
{
wxTextCtrl *t;
S.StartMultiColumn(2, wxCENTER);
{
wxChoice *c = S.AddChoice(_("Waveform:"), wxT(""), &mWaveforms);
c->SetValidator(wxGenericValidator(&mWaveform));
if (mChirp)
{
S.AddFixedText(wxT(""));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
S.AddTitle(_("Start"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
S.AddTitle(_("End"));
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
S.AddPrompt(_("Frequency (Hz):"));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldStartFreq(6, &mFrequency[0], NUM_VAL_NO_TRAILING_ZEROES);
vldStartFreq.SetRange(MIN_StartFreq, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Frequency Hertz Start"));
t->SetValidator(vldStartFreq);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldEndFreq(6, &mFrequency[1], NUM_VAL_NO_TRAILING_ZEROES);
vldEndFreq.SetRange(MIN_EndFreq, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Frequency Hertz End"));
t->SetValidator(vldEndFreq);
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
S.AddPrompt(_("Amplitude (Hz):"));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldStartAmp(6, &mAmplitude[0], NUM_VAL_NO_TRAILING_ZEROES);
vldStartAmp.SetRange(MIN_StartAmp, MAX_StartAmp);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Amplitude Start"));
t->SetValidator(vldStartAmp);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldEndAmp(6, &mAmplitude[1], NUM_VAL_NO_TRAILING_ZEROES);
vldEndAmp.SetRange(MIN_EndAmp, MAX_EndAmp);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Amplitude End"));
t->SetValidator(vldEndAmp);
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
c = S.AddChoice(_("Interpolation:"), wxT(""), &mInterpolations);
c->SetValidator(wxGenericValidator(&mInterpolation));
}
else
{
FloatingPointValidator<double> vldFrequency(6, &mFrequency[0], NUM_VAL_NO_TRAILING_ZEROES);
vldFrequency.SetRange(MIN_Frequency, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(_("Frequency (Hz):"), wxT(""), 12);
t->SetValidator(vldFrequency);
FloatingPointValidator<double> vldAmplitude(6, &mAmplitude[0], NUM_VAL_NO_TRAILING_ZEROES);
vldAmplitude.SetRange(MIN_Amplitude, MAX_Amplitude);
t = S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12);
t->SetValidator(vldAmplitude);
}
bool isSelection;
double duration = GetDuration(&isSelection);
S.AddPrompt(_("Duration:"));
mToneDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
isSelection ? _("hh:mm:ss + samples") : _("hh:mm:ss + milliseconds"),
duration,
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->EnableMenu();
S.AddWindow(mToneDurationT, wxALIGN_LEFT | wxALL);
}
S.EndMultiColumn();
return;
}
void EffectChangeSpeed::PopulateOrExchange(ShuttleGui & S)
{
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("TimeFormat"), mFormat, mFormat);
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl, mFromVinyl);
S.SetBorder(5);
S.StartVerticalLay(0);
{
S.AddSpace(0, 5);
S.AddTitle(_("Change Speed, affecting both Tempo and Pitch"));
S.AddSpace(0, 10);
// Speed multiplier and percent change controls.
S.StartMultiColumn(4, wxCENTER);
{
FloatingPointValidator<double> vldMultiplier(3, &mMultiplier, NUM_VAL_THREE_TRAILING_ZEROES);
vldMultiplier.SetRange(MIN_Percentage / 100.0, ((MAX_Percentage / 100.0) + 1));
mpTextCtrl_Multiplier =
S.Id(ID_Multiplier).AddTextBox(_("Speed Multiplier:"), wxT(""), 12);
mpTextCtrl_Multiplier->SetValidator(vldMultiplier);
FloatingPointValidator<double> vldPercentage(3, &m_PercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
mpTextCtrl_PercentChange =
S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
mpTextCtrl_PercentChange->SetValidator(vldPercentage);
}
S.EndMultiColumn();
// Percent change slider.
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mpSlider_PercentChange =
S.Id(ID_PercentChange).AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
mpSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
// Vinyl rpm controls.
S.StartMultiColumn(5, wxCENTER);
{
/* i18n-hint: "rpm" is an English abbreviation meaning "revolutions per minute". */
S.AddUnits(_("Standard Vinyl rpm:"));
wxASSERT(kNumVinyl == WXSIZEOF(kVinylStrings));
wxArrayString vinylChoices;
for (int i = 0; i < kNumVinyl; i++)
{
if (i == kVinyl_NA)
{
vinylChoices.Add(wxGetTranslation(kVinylStrings[i]));
}
else
{
vinylChoices.Add(kVinylStrings[i]);
}
}
mpChoice_FromVinyl =
S.Id(ID_FromVinyl).AddChoice(_("from"), wxT(""), &vinylChoices);
mpChoice_FromVinyl->SetName(_("From rpm"));
mpChoice_FromVinyl->SetSizeHints(100, -1);
mpChoice_ToVinyl =
S.Id(ID_ToVinyl).AddChoice(_("to"), wxT(""), &vinylChoices);
mpChoice_ToVinyl->SetName(_("To rpm"));
mpChoice_ToVinyl->SetSizeHints(100, -1);
}
S.EndMultiColumn();
// From/To time controls.
S.StartStatic(_("Selection Length"), 0);
{
S.StartMultiColumn(2, wxALIGN_LEFT);
{
S.AddPrompt(_("Current Length:"));
mpFromLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
mFormat,
mFromLength,
mProjectRate);
mpFromLengthCtrl->SetName(_("from"));
mpFromLengthCtrl->SetToolTip(_("Current length of selection."));
mpFromLengthCtrl->SetReadOnly(true);
mpFromLengthCtrl->EnableMenu(false);
S.AddWindow(mpFromLengthCtrl, wxALIGN_LEFT);
S.AddPrompt(_("New Length:"));
mpToLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_ToLength,
mFormat,
mToLength,
mProjectRate);
mpToLengthCtrl->SetName(_("to"));
mpToLengthCtrl->EnableMenu();
S.AddWindow(mpToLengthCtrl, wxALIGN_LEFT);
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndVerticalLay();
}
void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay(wxALIGN_LEFT, false);
{
S.AddUnits(_("Use arrow keys (or RETURN key after editing) to navigate fields."));
}
S.EndHorizontalLay();
if (mGrid == NULL) {
mGrid = new Grid(S.GetParent(),
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSUNKEN_BORDER);
mStringRenderer = new wxGridCellStringRenderer;
mComboEditor = new ComboEditor(wxArrayString(), true);
mGrid->RegisterDataType(wxT("Combo"), mStringRenderer, mComboEditor);
mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());
wxArrayString cs(WXSIZEOF(names), names);
// Build the initial (empty) grid
mGrid->CreateGrid(0, 2);
mGrid->SetRowLabelSize(0);
mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
mGrid->SetColLabelValue(0, _("Tag"));
mGrid->SetColLabelValue(1, _("Value"));
// Resize the name column and set default row height.
wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
mGrid->SetColSize(0, tc.GetSize().x);
mGrid->SetColMinimalWidth(0, tc.GetSize().x);
}
S.Prop(true);
S.AddWindow(mGrid, wxEXPAND | wxALL);
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(AddID).AddButton(_("&Add"));
S.Id(RemoveID).AddButton(_("&Remove"));
S.AddTitle(wxT(" "));
S.Id(ClearID).AddButton(_("Cl&ear"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTRE, false);
{
S.StartStatic(_("Genres"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(EditID).AddButton(_("E&dit..."));
S.Id(ResetID).AddButton(_("Rese&t..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Template"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(LoadID).AddButton(_("&Load..."));
S.Id(SaveID).AddButton(_("&Save..."));
S.AddTitle(wxT(" "));
S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
S.AddStandardButtons(eOkButton | eCancelButton);
}
void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
bool bShow;
gPrefs->Read(wxT("/AudioFiles/ShowId3Dialog"), &bShow, true );
S.StartVerticalLay();
{
S.StartHorizontalLay(wxALIGN_LEFT, 0);
{
S.AddUnits(_("Use arrow keys (or ENTER key after editing) to navigate fields."));
}
S.EndHorizontalLay();
if (mGrid == NULL) {
mGrid = safenew Grid(S.GetParent(),
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSUNKEN_BORDER);
mGrid->RegisterDataType(wxT("Combo"),
(mStringRenderer = safenew wxGridCellStringRenderer),
(mComboEditor = safenew ComboEditor(wxArrayString(), true)));
mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());
auto cs = names();
// Build the initial (empty) grid
mGrid->CreateGrid(0, 2);
mGrid->SetRowLabelSize(0);
mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
mGrid->SetColLabelValue(0, _("Tag"));
mGrid->SetColLabelValue(1, _("Value"));
// Resize the name column and set default row height.
wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
mGrid->SetColSize(0, tc.GetSize().x);
mGrid->SetColMinimalWidth(0, tc.GetSize().x);
}
S.Prop(1);
S.AddWindow(mGrid, wxEXPAND | wxALL);
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(AddID).AddButton(_("&Add"));
S.Id(RemoveID).AddButton(_("&Remove"));
S.AddTitle( {} );
S.Id(ClearID).AddButton(_("Cl&ear"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTRE, 0);
{
S.StartStatic(_("Genres"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(EditID).AddButton(_("E&dit..."));
S.Id(ResetID).AddButton(_("Rese&t..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Template"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(LoadID).AddButton(_("&Load..."));
S.Id(SaveID).AddButton(_("&Save..."));
S.AddTitle( {} );
S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_LEFT, 0);
{
S.Id( DontShowID ).AddCheckBox( _("Don't show this when exporting audio"), !bShow );
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);
}
void NyqBench::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxEXPAND, true);
{
wxPanel *scriptp;
wxPanel *outputp;
wxStaticBoxSizer *scripts;
wxStaticBoxSizer *outputs;
wxBoxSizer *bs;
mSplitter = new wxSplitterWindow(this,
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSP_LIVE_UPDATE |
wxSP_3DSASH |
wxSP_NOBORDER);
scriptp = new wxPanel(mSplitter,
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxNO_FULL_REPAINT_ON_RESIZE |
wxCLIP_CHILDREN);
bs = new wxBoxSizer(wxVERTICAL);
scriptp->SetSizer(bs);
mScriptBox = new wxStaticBox(scriptp,
wxID_ANY,
_("Script"));
scripts = new wxStaticBoxSizer(mScriptBox,
wxVERTICAL);
bs->Add(scripts, true, wxEXPAND);
mScript = new NyqTextCtrl(scriptp,
ID_SCRIPT,
wxEmptyString,
wxDefaultPosition,
wxDefaultSize,
wxTE_RICH2 | wxTE_RICH |
(mAutoWrap ? wxTE_BESTWRAP : wxTE_DONTWRAP) |
wxTE_NOHIDESEL |
wxTE_MULTILINE);
scripts->Add(mScript, true, wxEXPAND);
outputp = new wxPanel(mSplitter,
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxNO_FULL_REPAINT_ON_RESIZE |
wxCLIP_CHILDREN);
bs = new wxBoxSizer(wxVERTICAL);
outputp->SetSizer(bs);
mOutputBox = new wxStaticBox(outputp,
wxID_ANY,
_("Output"));
outputs = new wxStaticBoxSizer(mOutputBox,
wxVERTICAL);
bs->Add(outputs, true, wxEXPAND);
mOutput = new NyqTextCtrl(outputp,
ID_OUTPUT,
wxEmptyString,
wxDefaultPosition,
wxDefaultSize,
wxTE_READONLY |
#if !defined(__WXMAC__)
// I could not get the bloody horizontal scroll bar to appear on
// wxMac, so we can't use wxTE_DONTWRAP as you can't easily scroll
// left and right.
wxTE_DONTWRAP |
#endif
wxTE_NOHIDESEL |
wxTE_MULTILINE);
outputs->Add(mOutput, true, wxEXPAND);
switch (mSplitMode)
{
case wxSPLIT_VERTICAL:
mSplitter->SplitVertically(scriptp, outputp, 300);
break;
case wxSPLIT_HORIZONTAL:
mSplitter->SplitHorizontally(scriptp, outputp, 300);
break;
default:
mSplitter->Initialize((mShowCode ? scriptp : outputp));
break;
}
mSplitter->SetMinimumPaneSize(50);
S.AddSpace(5, 1);
S.Prop(true);
S.AddWindow(mSplitter, wxEXPAND);
S.AddSpace(5, 1);
mSplitter->SetMinSize(wxSize(600, 400));
}
S.EndHorizontalLay();
S.AddSpace(1, 5);
return;
}
void EffectScienFilter::PopulateOrExchange(ShuttleGui & S)
{
wxWindow *parent = S.GetParent();
S.AddSpace(5);
S.SetSizerProportion(1);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.SetStretchyRow(0);
// -------------------------------------------------------------------
// ROW 1: Freq response panel and sliders for vertical scale
// -------------------------------------------------------------------
S.StartVerticalLay();
{
mdBRuler = new RulerPanel(parent, wxID_ANY);
mdBRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mdBRuler->ruler.SetOrientation(wxVERTICAL);
mdBRuler->ruler.SetRange(30.0, -120.0);
mdBRuler->ruler.SetFormat(Ruler::LinearDBFormat);
mdBRuler->ruler.SetUnits(_("dB"));
mdBRuler->ruler.SetLabelEdges(true);
int w;
mdBRuler->ruler.GetMaxSize(&w, NULL);
mdBRuler->SetSize(wxSize(w, 150)); // height needed for wxGTK
S.SetBorder(1);
S.AddSpace(1, 1);
S.Prop(1);
S.AddWindow(mdBRuler, wxALIGN_RIGHT | wxTOP);
S.AddSpace(1, 1);
}
S.EndVerticalLay();
mPanel = new EffectScienFilterPanel(this, parent);
mPanel->SetFreqRange(mLoFreq, mNyquist);
S.SetBorder(5);
S.Prop(1);
S.AddWindow(mPanel, wxEXPAND | wxRIGHT);
S.SetSizeHints(-1, -1);
S.StartVerticalLay();
{
S.AddVariableText(_("+ dB"), false, wxCENTER);
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMaxSlider = S.Id(ID_dBMax).AddSlider(wxT(""), 10, 20, 0);
#if wxUSE_ACCESSIBILITY
mdBMaxSlider->SetName(_("Max dB"));
mdBMaxSlider->SetAccessible(new SliderAx(mdBMaxSlider, wxString(wxT("%d ")) + _("dB")));
#endif
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMinSlider = S.Id(ID_dBMin).AddSlider(wxT(""), -10, -10, -120);
S.AddVariableText(_("- dB"), false, wxCENTER);
#if wxUSE_ACCESSIBILITY
mdBMinSlider->SetName(_("Min dB"));
mdBMinSlider->SetAccessible(new SliderAx(mdBMinSlider, wxString(wxT("%d ")) + _("dB")));
#endif
}
S.EndVerticalLay();
// -------------------------------------------------------------------
// ROW 2: Frequency ruler
// -------------------------------------------------------------------
S.AddSpace(1, 1);
mfreqRuler = new RulerPanel(parent, wxID_ANY);
mfreqRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mfreqRuler->ruler.SetOrientation(wxHORIZONTAL);
mfreqRuler->ruler.SetLog(true);
mfreqRuler->ruler.SetRange(mLoFreq, mNyquist);
mfreqRuler->ruler.SetFormat(Ruler::IntFormat);
mfreqRuler->ruler.SetUnits(wxT(""));
mfreqRuler->ruler.SetFlip(true);
mfreqRuler->ruler.SetLabelEdges(true);
int h;
mfreqRuler->ruler.GetMaxSize(NULL, &h);
mfreqRuler->SetMinSize(wxSize(-1, h));
S.Prop(1);
S.AddWindow(mfreqRuler, wxEXPAND | wxALIGN_LEFT | wxRIGHT);
S.AddSpace(1, 1);
// -------------------------------------------------------------------
// ROW 3 and 4: Type, Order, Ripple, Subtype, Cutoff
// -------------------------------------------------------------------
S.AddSpace(1, 1);
S.SetSizerProportion(0);
S.StartMultiColumn(8, wxALIGN_CENTER);
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
mFilterTypeCtl = S.Id(ID_Type).AddChoice(_("&Filter Type:"), wxT(""), &typeChoices);
mFilterTypeCtl->SetValidator(wxGenericValidator(&mFilterType));
S.SetSizeHints(-1, -1);
wxArrayString orders;
for (int i = 1; i <= 10; i++)
{
orders.Add(wxString::Format(wxT("%d"), i));
}
/*i18n-hint: 'Order' means the complexity of the filter, and is a number between 1 and 10.*/
mFilterOrderCtl = S.Id(ID_Order).AddChoice(_("O&rder:"), wxT(""), &orders);
mFilterOrderCtl->SetValidator(wxGenericValidator(&mOrderIndex));
S.SetSizeHints(-1, -1);
S.AddSpace(1, 1);
FloatingPointValidator<float> vldRipple(1, &mRipple);
vldRipple.SetRange(MIN_Passband, MAX_Passband);
mRippleCtlP = S.AddVariableText(_("&Passband Ripple:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mRippleCtl = S.Id(ID_Ripple).AddTextBox(wxT(""), wxT(""), 10);
mRippleCtl->SetName(_("Passband Ripple (dB)"));
mRippleCtl->SetValidator(vldRipple);
mRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
wxASSERT(kNumSubTypes == WXSIZEOF(kSubTypeStrings));
wxArrayString subTypeChoices;
for (int i = 0; i < kNumSubTypes; i++)
{
subTypeChoices.Add(wxGetTranslation(kSubTypeStrings[i]));
}
mFilterSubTypeCtl = S.Id(ID_SubType).AddChoice(_("&Subtype:"), wxT(""), &subTypeChoices);
mFilterSubTypeCtl->SetValidator(wxGenericValidator(&mFilterSubtype));
S.SetSizeHints(-1, -1);
FloatingPointValidator<float> vldCutoff(1, &mCutoff);
vldCutoff.SetRange(MIN_Cutoff, mNyquist - 1);
mCutoffCtl = S.Id(ID_Cutoff).AddTextBox(_("C&utoff:"), wxT(""), 10);
mCutoffCtl->SetName(_("Cutoff (Hz)"));
mCutoffCtl->SetValidator(vldCutoff);
S.AddUnits(_("Hz"));
FloatingPointValidator<float> vldStopbandRipple(1, &mStopbandRipple);
vldStopbandRipple.SetRange(MIN_Stopband, MAX_Stopband);
mStopbandRippleCtlP = S.AddVariableText(_("Minimum S&topband Attenuation:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mStopbandRippleCtl = S.Id(ID_StopbandRipple).AddTextBox(wxT(""), wxT(""), 10);
mStopbandRippleCtl->SetName(_("Minimum S&topband Attenuation (dB)"));
mStopbandRippleCtl->SetValidator(vldStopbandRipple);
mStopbandRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
S.AddSpace(1, 1);
}
S.EndMultiColumn();
mFilterTypeCtl->SetFocus();
return;
}
void TimerRecordDialog::PopulateOrExchange(ShuttleGui& S)
{
bool bAutoSave = gPrefs->ReadBool("/TimerRecord/AutoSave", false);
bool bAutoExport = gPrefs->ReadBool("/TimerRecord/AutoExport", false);
int iPostTimerRecordAction = gPrefs->ReadLong("/TimerRecord/PostAction", 0);
S.SetBorder(5);
S.StartMultiColumn(2, wxCENTER);
{
S.StartVerticalLay(true);
{
/* i18n-hint: This string is used to configure the controls for times when the recording is
* started and stopped. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The 'h' indicates the first number displayed is hours, the 'm' indicates the second number
* displayed is minutes, and the 's' indicates that the third number displayed is seconds.
*/
wxString strFormat = _("099 h 060 m 060 s");
using Options = NumericTextCtrl::Options;
S.StartStatic(_("Start Date and Time"), true);
{
m_pDatePickerCtrl_Start =
safenew wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_START, // wxWindowID id,
m_DateTime_Start); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_Start->SetName(_("Start Date"));
m_pDatePickerCtrl_Start->SetRange(wxDateTime::Today(), wxInvalidDateTime); // No backdating.
#if wxUSE_ACCESSIBILITY
m_pDatePickerCtrl_Start->SetAccessible( safenew DatePickerCtrlAx(m_pDatePickerCtrl_Start));
#endif
S.AddWindow(m_pDatePickerCtrl_Start);
m_pTimeTextCtrl_Start = safenew NumericTextCtrl(
this, ID_TIMETEXT_START, NumericConverter::TIME,
wxEmptyString, 0, 44100,
Options{}
.MenuEnabled(false)
.Format(strFormat)
.Value(true, wxDateTime_to_AudacityTime(m_DateTime_Start)));
m_pTimeTextCtrl_Start->SetName(_("Start Time"));
S.AddWindow(m_pTimeTextCtrl_Start);
}
S.EndStatic();
S.StartStatic(_("End Date and Time"), true);
{
m_pDatePickerCtrl_End =
safenew wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_END, // wxWindowID id,
m_DateTime_End); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize,
// long style = wxDP_DEFAULT | wxDP_SHOWCENTURY,
// const wxValidator& validator = wxDefaultValidator,
// const wxString& name = "datectrl")
m_pDatePickerCtrl_End->SetRange(m_DateTime_Start, wxInvalidDateTime); // No backdating.
m_pDatePickerCtrl_End->SetName(_("End Date"));
#if wxUSE_ACCESSIBILITY
m_pDatePickerCtrl_End->SetAccessible( safenew DatePickerCtrlAx(m_pDatePickerCtrl_End));
#endif
S.AddWindow(m_pDatePickerCtrl_End);
m_pTimeTextCtrl_End = safenew NumericTextCtrl(
this, ID_TIMETEXT_END, NumericConverter::TIME,
wxEmptyString, 0, 44100,
Options{}
.MenuEnabled(false)
.Format(strFormat)
.Value(true, wxDateTime_to_AudacityTime(m_DateTime_End)));
m_pTimeTextCtrl_End->SetName(_("End Time"));
S.AddWindow(m_pTimeTextCtrl_End);
}
S.EndStatic();
S.StartStatic(_("Duration"), true);
{
/* i18n-hint: This string is used to configure the controls which shows the recording
* duration. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The string 'days' indicates that the first number in the control will be the number of days,
* then the 'h' indicates the second number displayed is hours, the 'm' indicates the third
* number displayed is minutes, and the 's' indicates that the fourth number displayed is
* seconds.
*/
wxString strFormat1 = _("099 days 024 h 060 m 060 s");
m_pTimeTextCtrl_Duration = safenew NumericTextCtrl(
this, ID_TIMETEXT_DURATION, NumericConverter::TIME,
wxEmptyString, 0, 44100,
Options{}
.MenuEnabled(false)
.Format(strFormat1)
.Value(true, m_TimeSpan_Duration.GetSeconds().ToDouble()));
m_pTimeTextCtrl_Duration->SetName(_("Duration"));
S.AddWindow(m_pTimeTextCtrl_Duration);
}
S.EndStatic();
}
S.EndVerticalLay();
S.StartVerticalLay(true);
{
S.StartStatic(_("Automatic Save"), true);
{
// If checked, the project will be saved when the recording is completed
m_pTimerAutoSaveCheckBoxCtrl = S.Id(ID_AUTOSAVE_CHECKBOX).AddCheckBox(_("Enable &Automatic Save?"),
(bAutoSave ? "true" : "false"));
S.StartMultiColumn(3, wxEXPAND);
{
wxString sInitialValue = wxT("");
AudacityProject* pProject = GetActiveProject();
wxString sSaveValue = pProject->GetFileName();
if (sSaveValue != wxEmptyString) {
m_fnAutoSaveFile.Assign(sSaveValue);
sInitialValue = _("Current Project");
}
S.AddPrompt(_("Save Project As:"));
m_pTimerSavePathTextCtrl = NewPathControl(this, ID_AUTOSAVEPATH_TEXT, _("Save Project As:"), sInitialValue);
m_pTimerSavePathTextCtrl->SetEditable(false);
S.AddWindow(m_pTimerSavePathTextCtrl);
m_pTimerSavePathButtonCtrl = S.Id(ID_AUTOSAVEPATH_BUTTON).AddButton(_("Select..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Automatic Export"), true);
{
m_pTimerAutoExportCheckBoxCtrl = S.Id(ID_AUTOEXPORT_CHECKBOX).AddCheckBox(_("Enable Automatic &Export?"), (bAutoExport ? "true" : "false"));
S.StartMultiColumn(3, wxEXPAND);
{
S.AddPrompt(_("Export Project As:"));
m_pTimerExportPathTextCtrl = NewPathControl(this, ID_AUTOEXPORTPATH_TEXT, _("Export Project As:"), wxT(""));
m_pTimerExportPathTextCtrl->SetEditable(false);
S.AddWindow(m_pTimerExportPathTextCtrl);
m_pTimerExportPathButtonCtrl = S.Id(ID_AUTOEXPORTPATH_BUTTON).AddButton(_("Select..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Options"), true);
{
wxArrayString arrayOptions;
arrayOptions.Add(_("Do nothing"));
arrayOptions.Add(_("Exit Audacity"));
arrayOptions.Add(_("Restart system"));
arrayOptions.Add(_("Shutdown system"));
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(0));
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(1));
#ifdef __WINDOWS__
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(2));
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(3));
#endif
m_sTimerAfterCompleteOption = arrayOptions.Item(iPostTimerRecordAction);
m_pTimerAfterCompleteChoiceCtrl = S.AddChoice(_("After Recording completes:"),
m_sTimerAfterCompleteOption,
&m_sTimerAfterCompleteOptionsArray);
}
S.EndStatic();
}
S.EndVerticalLay();
}
S.EndMultiColumn();
// MY: Added the help button here
S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);
Layout();
Fit();
SetMinSize(GetSize());
Center();
EnableDisableAutoControls(bAutoSave, CONTROL_GROUP_SAVE);
EnableDisableAutoControls(bAutoExport, CONTROL_GROUP_EXPORT);
}