void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartHorizontalLay();
{
// Action choices
wxArrayString processChoices;
processChoices.Add(_("Truncate Detected Silence"));
processChoices.Add(_("Compress Excess Silence"));
S.Id(ID_PROCESS_CHOICE).TieChoice(wxT(""),
mEffect->mProcessIndex,
&processChoices);
S.SetSizeHints(-1, -1);
}
S.EndHorizontalLay();
S.StartStatic(_("Detect Silence"));
{
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Threshold
wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());
S.TieChoice(_("Level:"),
mEffect->mTruncDbChoiceIndex,
&choices);
S.SetSizeHints(-1, -1);
S.AddSpace(0); // 'choices' aleady includes units.
// Ignored silence
S.Id(ID_DETECT_SILENCE).TieNumericTextBox(_("Duration:"),
mEffect->mInitialAllowedSilence,
12);
S.AddUnits(wxT("seconds"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Truncation / Compression factor
S.Id( ID_TRUNCATION_DURATION ).TieNumericTextBox(_("Truncate to:"),
mEffect->mTruncLongestAllowedSilence,
12);
S.AddUnits(wxT("seconds"));
S.Id( ID_COMPRESS_FACTOR ).TieNumericTextBox(_("Compress to:"),
mEffect->mSilenceCompressPercent,
12);
S.AddUnits(wxT("percent"));
}
S.EndMultiColumn();
// Warnings
pWarning = S.AddVariableText( wxT("") );
UpdateUI();
}
void SetTrackVisualsCommand::PopulateOrExchange(ShuttleGui & S)
{
SetTrackBase::PopulateOrExchange( S );
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol( 2 );
S.Optional( bHasHeight ).TieNumericTextBox( _("Height:"), mHeight );
S.Optional( bHasColour ).TieChoice( _("Colour:"), mColour,
LocalizedStrings( kColourStrings, nColours ) );
S.Optional( bHasDisplayType ).TieChoice( _("Display:"), mDisplayType,
LocalizedStrings( kDisplayTypeStrings, nDisplayTypes ) );
S.Optional( bHasScaleType ).TieChoice( _("Scale:"), mScaleType,
LocalizedStrings( kScaleTypeStrings, nScaleTypes ) );
S.Optional( bHasVZoom ).TieChoice( _("VZoom:"), mVZoom,
LocalizedStrings( kZoomTypeStrings, nZoomTypes ) );
S.Optional( bHasVZoomTop ).TieTextBox( _("VZoom Top:"), mVZoomTop );
S.Optional( bHasVZoomBottom ).TieTextBox( _("VZoom Bottom:"), mVZoomBottom );
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol( 1 );
S.Optional( bHasUseSpecPrefs ).TieCheckBox( _("Use Spectral Prefs"), bUseSpecPrefs );
S.Optional( bHasSpectralSelect ).TieCheckBox( _("Spectral Select"), bSpectralSelect);
S.Optional( bHasGrayScale ).TieCheckBox( _("Gray Scale"), bGrayScale );
}
S.EndMultiColumn();
}
/// Populates more complex dialog that has a chirp.
void ToneGenDialog::PopulateOrExchangeExtended( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice( _("Waveform:"), waveform, waveforms);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxCENTER);
{
S.AddFixedText(wxT(""));
S.AddTitle( _("Start"));
S.AddTitle( _("End") );
S.TieTextBox( _("Frequency / Hz"),frequency[0], 10);
S.TieTextBox( wxT(""),frequency[1], 10);
S.TieTextBox( _("Amplitude (0-1)"),amplitude[0], 10);
S.TieTextBox( wxT(""),amplitude[1], 10);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.TieTextBox( _("Length (seconds)"),length, 10 );
}
S.EndMultiColumn();
}
void EffectDtmf::PopulateOrExchange(ShuttleGui & S)
{
// dialog will be passed values from effect
// Effect retrieves values from saved config
// Dialog will take care of using them to initialize controls
// If there is a selection, use that duration, otherwise use
// value from saved config: this is useful is user wants to
// replace selection with dtmf sequence
S.AddSpace(0, 5);
S.StartMultiColumn(2, wxCENTER);
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST, &dtmfSequence);
vldDtmf.SetIncludes(wxArrayString(WXSIZEOF(kSymbols), kSymbols));
mDtmfSequenceT = S.Id(ID_Sequence).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfSequenceT->SetValidator(vldDtmf);
FloatingPointValidator<double> vldAmp(3, &dtmfAmplitude, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amplitude, MAX_Amplitude);
S.Id(ID_Amplitude).AddTextBox(_("Amplitude (0-1):"), wxT(""), 10)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mDtmfDurationT = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_Duration,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->EnableMenu();
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyCycleS = S.Id(ID_DutyCycle).AddSlider( {},
dtmfDutyCycle * SCL_DutyCycle,
MAX_DutyCycle * SCL_DutyCycle,
MIN_DutyCycle * SCL_DutyCycle);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.AddVariableText(wxString::Format(wxT("%.1f %%"), dtmfDutyCycle), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.AddVariableText(wxString::Format(wxString(wxT("%.0f ")) + _("ms"), dtmfTone * 1000.0), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.AddVariableText(wxString::Format(wxString(wxT("%0.f ")) + _("ms"), dtmfSilence * 1000.0), false);
}
S.EndMultiColumn();
}
void AmplifyDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
vld.SetIncludes(wxArrayString(12, numbers));
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Dominic Mazzoni"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
// Amplitude
S.StartMultiColumn(2, wxCENTER);
{
mAmpT = S.Id(ID_AMP_TEXT).AddTextBox(_("Amplification (dB):"),
wxT(""),
12);
mAmpT->SetValidator(vld);
}
S.EndMultiColumn();
// Amplitude
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mAmpS = S.Id(ID_AMP_SLIDER).AddSlider(wxT(""),
0,
AMP_MAX,
AMP_MIN);
mAmpS->SetName(_("Amplification (dB)"));
}
S.EndHorizontalLay();
// Peek
S.StartMultiColumn(2, wxCENTER);
{
mPeakT = S.Id(ID_PEAK_TEXT).AddTextBox(_("New Peak Amplitude (dB):"),
wxT(""),
12);
// mPeakT->SetValidator(vld);
}
S.EndMultiColumn();
// Clipping
S.StartHorizontalLay(wxCENTER);
{
mClip = S.Id(ID_CLIP_CHECKBOX).AddCheckBox(_("Allow clipping"),
wxT("false"));
}
S.EndHorizontalLay();
return;
}
void ChangeSpeedDialog::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(10);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Change Speed, affecting both Tempo and Pitch") +
wxString(wxT("\n\n")) +
_("by Vaughan Johnson && Dominic Mazzoni") +
wxString(wxT("\n")) +
_("using SampleRate, by Erik de Castro Lopo"));
}
S.EndHorizontalLay();
S.SetBorder(5);
//
S.StartMultiColumn(2, wxCENTER);
{
mpTextCtrl_PercentChange =
S.Id(ID_TEXT_PERCENTCHANGE).AddTextBox(_("Percent Change:"), wxT(""), 12);
wxTextValidator validator(wxFILTER_NUMERIC);
mpTextCtrl_PercentChange->SetValidator(validator);
}
S.EndMultiColumn();
//
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mpSlider_PercentChange =
S.Id(ID_SLIDER_PERCENTCHANGE).AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
mpSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
//
S.StartMultiColumn(5, wxCENTER);
{
S.AddUnits(_("Standard Vinyl RPM:"));
wxArrayString rpmStrings;
rpmStrings.Add(wxT("33 1/3"));
rpmStrings.Add(wxT("45"));
rpmStrings.Add(wxT("78"));
/* i18n-hint: n/a is an English abbreviation meaning "not applicable". */
rpmStrings.Add(_("n/a"));
mpChoice_FromVinyl =
S.Id(ID_CHOICE_FROMVINYL).AddChoice(_("from"), wxT(""), &rpmStrings);
mpChoice_FromVinyl->SetName(_("From RPM"));
mpChoice_FromVinyl->SetSizeHints(100, -1);
mpChoice_ToVinyl =
S.Id(ID_CHOICE_TOVINYL).AddChoice(_("to"), wxT(""), &rpmStrings);
mpChoice_ToVinyl->SetName(_("To RPM"));
mpChoice_ToVinyl->SetSizeHints(100, -1);
}
S.EndMultiColumn();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), dAmplitude, 10);
S.AddPrompt(_("Duration:"));
if (mDtmfDurationT == NULL)
{
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
wxT(""),
dDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to the
* effect, I want it (dDuration) to be used as the duration, and with
* "seconds" this does not always work properly. For example, it rounds
* down to zero... */
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
mDtmfDurationT->EnableMenu();
}
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
wxArrayString empty;
S.SetBorder(2);
S.StartStatic(_("Interface"));
{
S.StartMultiColumn(2);
{
S.Id(HostID);
mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
wxT("/MidiIO/Host"),
wxT(""),
mHostNames,
mHostLabels);
S.SetSizeHints(mHostNames);
S.AddPrompt(_("Using:"));
S.AddFixedText(wxString(Pa_GetVersionText(), wxConvLocal));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Playback"));
{
S.StartMultiColumn(2);
{
S.Id(PlayID);
mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Recording"));
{
S.StartMultiColumn(2);
{
S.Id(RecordID);
mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
S.Id(ChannelsID);
/*
mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
wxEmptyString,
&empty);
*/
}
S.EndMultiColumn();
}
S.EndStatic();
}
void MacroCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
S.StartMultiColumn(4, wxEXPAND);
{
S.SetStretchyCol(1);
mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
mCommand->SetEditable(false);
mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
mEditParams->Enable(false); // disable button as box is empty
mUsePreset = S.Id(UsePresetButtonID).AddButton(_("&Use Preset"));
mUsePreset->Enable(false); // disable button as box is empty
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
mParameters->SetEditable(false);
wxString prompt{_("&Details")};
S.Prop(0).AddPrompt(prompt);
mDetails = S.AddTextWindow( wxT(""));
mDetails->SetEditable(false);
mDetails->SetName(wxStripMenuCodes(prompt));
}
S.EndMultiColumn();
S.Prop(10).StartStatic(_("Choose command"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
mChoices = S.Id(CommandsListID).AddListControl();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons( eOkButton | eCancelButton | eHelpButton);
PopulateCommandList();
if (mChoices->GetItemCount() > 0) {
// set first item to be selected (and the focus when the
// list first becomes the focus)
mChoices->SetItemState(0, wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED,
wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED);
}
SetMinSize(wxSize(780, 560));
Fit();
Center();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(20, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura (2006)"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
S.AddPrompt(_("DTMF duration:"));
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
/*
use this instead of "seconds" because if a selection is passed to the effect,
I want it (dDuration) to be used as the duration, and with "seconds" this does
not always work properly. For example, it rounds down to zero...
*/
TimeTextCtrl::GetBuiltinFormat(dIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))),
dDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
S.AddWindow(mDtmfDurationT);
mDtmfDurationT->EnableMenu();
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX);
mDtmfDutyS->SetRange(DUTY_MIN, DUTY_MAX);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void AmplifyDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_NUMERIC);
S.AddSpace(0, 5);
// Amplitude
S.StartMultiColumn(2, wxCENTER);
{
mAmpT = S.Id(ID_AMP_TEXT).AddTextBox(_("Amplification (dB):"),
wxT(""),
12);
mAmpT->SetValidator(vld);
}
S.EndMultiColumn();
// Amplitude
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mAmpS = S.Id(ID_AMP_SLIDER).AddSlider(wxT(""),
0,
AMP_MAX,
AMP_MIN);
mAmpS->SetName(_("Amplification dB"));
}
S.EndHorizontalLay();
// Peek
S.StartMultiColumn(2, wxCENTER);
{
mPeakT = S.Id(ID_PEAK_TEXT).AddTextBox(_("New Peak Amplitude (dB):"),
wxT(""),
12);
mPeakT->SetValidator(vld);
}
S.EndMultiColumn();
// Clipping
S.StartHorizontalLay(wxCENTER);
{
mClip = S.Id(ID_CLIP_CHECKBOX).AddCheckBox(_("Allow clipping"),
wxT("false"));
}
S.EndHorizontalLay();
return;
}
void EffectNoise::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(nTypes == WXSIZEOF(kTypeStrings));
S.StartMultiColumn(2, wxCENTER);
{
auto typeChoices = LocalizedStrings(kTypeStrings, nTypes);
S.AddChoice(_("Noise type:"), wxT(""), &typeChoices)->SetValidator(wxGenericValidator(&mType));
FloatingPointValidator<double> vldAmp(6, &mAmp, NumValidatorStyle::NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amp, MAX_Amp);
S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mNoiseDurationT = safenew
NumericTextCtrl(S.GetParent(), wxID_ANY,
NumericConverter::TIME,
GetDurationFormat(),
GetDuration(),
mProjectRate,
NumericTextCtrl::Options{}
.AutoPos(true));
mNoiseDurationT->SetName(_("Duration"));
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Noise type:"), nType, nTypeList);
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), nAmplitude, 10);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
NumericTextCtrl(NumericConverter::TIME, this,
wxID_ANY,
wxT(""),
nDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void EffectNoise::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
S.StartMultiColumn(2, wxCENTER);
{
S.AddChoice(_("Noise type:"), wxT(""), &typeChoices)->SetValidator(wxGenericValidator(&mType));
FloatingPointValidator<double> vldAmp(6, &mAmp, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amp, MAX_Amp);
S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mNoiseDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->EnableMenu();
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void FindClippingDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Leland Lucius"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartMultiColumn(2, wxALIGN_CENTER);
{
S.TieTextBox(_("Start threshold (samples):"),
mEffect->mStart,
10)->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
S.TieTextBox(_("Stop threshold (samples):"),
mEffect->mStop,
10)->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
}
S.EndMultiColumn();
}
void PaulstretchDialog::PopulateOrExchange(ShuttleGui & S){
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Nasca Octavian Paul"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
S.EndHorizontalLay();
S.StartMultiColumn(2, wxALIGN_CENTER);
{
/* i18n-hint: This is how many times longer the sound will be, e.g. applying
* the effect to a 1-second sample, with the default Stretch Factor of 10.0
* will give an (approximately) 10 second sound
*/
m_pTextCtrl_Amount = S.AddTextBox(_("Stretch Factor:"),wxT("10.0"),10);
m_pTextCtrl_Amount->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
m_pTextCtrl_TimeResolution= S.AddTextBox(_("Time Resolution (seconds):"), wxT("0.25"),10);
m_pTextCtrl_TimeResolution->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
}
S.EndMultiColumn();
};
void ModulePrefs::PopulateOrExchange(ShuttleGui & S)
{
wxArrayString StatusChoices;
StatusChoices.Add( _("Disabled" ) );
StatusChoices.Add( _("Enabled" ) );
StatusChoices.Add( _("Ask" ) );
StatusChoices.Add( _("Failed" ) );
StatusChoices.Add( _("New" ) );
S.SetBorder(2);
S.StartStatic(_(""));
{
S.AddFixedText(_("These are experimental Modules. Enable them only if you've read the manual\nand know what you are doing.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Ask' means Audacity will ask if you want to load the plug-each time it starts.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Failed' means Audacity thinks the plug-in is broken and won't run it.") );
S.AddFixedText(wxString(wxT(" ")) + _("'New' is like 'Ask', but asks just once.") );
S.StartMultiColumn( 2 );
int i;
for(i=0;i<(int)mModules.GetCount();i++)
S.TieChoice( mModules[i], mStatuses[i], &StatusChoices );
S.EndMultiColumn();
lse);
}
S.EndStatic();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieChoice(_("Noise type") + wxString(wxT(":")), nType, nTypeList);
S.TieTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), nAmplitude, 10);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void GUIPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Display"));
{
S.TieCheckBox(_("&Ergonomic order of Transport Toolbar buttons"),
wxT("/GUI/ErgonomicTransportButtons"),
true);
S.TieCheckBox(_("S&how 'How to Get Help' dialog box at program start up"),
wxT("/GUI/ShowSplashScreen"),
true);
S.AddSpace(10);
S.StartMultiColumn(2);
{
const wxString defaultRange = wxString::Format(wxT("%d"), ENV_DB_RANGE);
S.TieChoice(_("Meter dB &range:"),
ENV_DB_KEY,
defaultRange,
mRangeChoices,
mRangeCodes);
S.SetSizeHints(mRangeChoices);
S.TieChoice(_("&Language:"),
wxT("/Locale/Language"),
wxT(""),
mLangNames,
mLangCodes);
S.SetSizeHints(mLangNames);
S.TieChoice(_("Location of &Manual:"),
wxT("/GUI/Help"),
wxT("Local"),
mHtmlHelpChoices,
mHtmlHelpCodes);
S.SetSizeHints(mHtmlHelpChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("&Beep on completion of longer activities"),
wxT("/GUI/BeepOnCompletion"),
false);
S.TieCheckBox(_("Re&tain labels if selection snaps to a label edge"),
wxT("/GUI/RetainLabels"),
false);
#ifdef EXPERIMENTAL_OUTPUT_DISPLAY
S.TieCheckBox(_("&Display a mono channel as virtual stereo"),
wxT("/GUI/MonoAsVirtualStereo"),
false);
#endif
}
S.EndStatic();
}
void EchoDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxCENTER, false);
{
/* i18n-hint: && in here is an escape character to get a single & on
* screen, so keep it as is */
S.AddTitle(_("by Dominic Mazzoni && Vaughan Johnson"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartMultiColumn(2, wxALIGN_CENTER);
{
m_pTextCtrl_Delay = S.AddTextBox(_("Delay time (seconds):"),
wxT("1.0"),
10);
m_pTextCtrl_Delay->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
m_pTextCtrl_Decay = S.AddTextBox(_("Decay factor:"),
wxT("0.5"),
10);
m_pTextCtrl_Decay->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
}
S.EndMultiColumn();
}
/// Populates simple dialog that has a single tone.
void ToneGenDialog::PopulateOrExchangeStandard( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Waveform") + wxString(wxT(":")), waveform, waveforms);
S.SetSizeHints(-1, -1);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Frequency (Hz)") + wxString(wxT(":")), frequency[0], 5);
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), amplitude[0], 5);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mToneDurationT == NULL)
{
mToneDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
mDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->SetFormatString(mToneDurationT->GetBuiltinFormat(isSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mToneDurationT->EnableMenu();
}
S.AddWindow(mToneDurationT);
}
S.EndMultiColumn();
}
void ModulePrefs::PopulateOrExchange(ShuttleGui & S)
{
wxArrayString StatusChoices;
StatusChoices.Add( _("Disabled" ) );
StatusChoices.Add( _("Enabled" ) );
StatusChoices.Add( _("Ask" ) );
StatusChoices.Add( _("Failed" ) );
StatusChoices.Add( _("New" ) );
S.SetBorder(2);
S.StartStatic(wxT(""));
{
S.AddFixedText(_("These are experimental modules. Enable them only if you've read the Audacity Manual\nand know what you are doing.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Ask' means Audacity will ask if you want to load the module each time it starts.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Failed' means Audacity thinks the module is broken and won't run it.") );
S.AddFixedText(wxString(wxT(" ")) + _("'New' means no choice has been made yet.") );
S.AddFixedText(_("Changes to these settings only take effect when Audacity starts up."));
S.StartScroller();
{
S.StartMultiColumn( 2 );
int i;
for(i=0;i<(int)mModules.GetCount();i++)
S.TieChoice( mModules[i], mStatuses[i], &StatusChoices );
S.EndMultiColumn();
}
if( mModules.GetCount() < 1 )
{
S.AddFixedText( _("No modules were found") );
}
S.EndScroller();
}
S.EndStatic();
}
void EffectLeveller::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(kNumPasses == WXSIZEOF(kPassStrings));
wxArrayString passChoices;
for (int i = 0; i < kNumPasses; i++)
{
passChoices.Add(wxGetTranslation(kPassStrings[i]));
}
wxArrayString dBChoices(Enums::NumDbChoices,Enums::GetDbChoices());
S.SetBorder(5);
S.StartVerticalLay();
{
S.AddSpace(5);
S.StartMultiColumn(2, wxALIGN_CENTER);
{
S.AddChoice(_("Degree of Leveling:"),
wxT(""),
&passChoices)->SetValidator(wxGenericValidator(&mPassIndex));
S.AddChoice(_("Noise Threshold:"),
wxT(""),
&dBChoices)->SetValidator(wxGenericValidator(&mDbIndex));
}
S.EndMultiColumn();
}
S.EndVerticalLay();
return;
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duration"), false);
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT);
S.TieTextBox(_("Amplitude (0-1)"), nAmplitude, 10);
S.TieChoice(_("Noise type"), nType, nTypeList);
S.SetSizeHints(-1, -1);
}
S.EndMultiColumn();
}
void WahwahDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_NUMERIC);
S.SetBorder(5);
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxCENTER);
{
wxSlider *s;
wxTextCtrl * tempTC;
tempTC = S.Id(ID_FREQTEXT).AddTextBox(_("LFO Frequency (Hz):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_FREQSLIDER).AddSlider(wxT(""), 100, FREQ_MAX, FREQ_MIN);
s->SetName(_("LFO frequency in hertz"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_PHASETEXT).AddTextBox(_("LFO Start Phase (deg.):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_PHASESLIDER).AddSlider(wxT(""), 0, PHASE_MAX, PHASE_MIN);
s->SetName(_("LFO start phase in degrees"));
s->SetLineSize(10);
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_DEPTHTEXT).AddTextBox(_("Depth (%):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_DEPTHSLIDER).AddSlider(wxT(""), 0, DEPTH_MAX, DEPTH_MIN);
s->SetName(_("Depth in percent"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_RESONANCETEXT).AddTextBox(_("Resonance:"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_RESONANCESLIDER).AddSlider(wxT(""), 0, RES_MAX, RES_MIN);
s->SetName(_("Resonance"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_FREQOFFTEXT).AddTextBox(_("Wah Frequency Offset (%):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s =S.Id(ID_FREQOFFSLIDER).AddSlider(wxT(""), 0, FREQOFF_MAX, FREQOFF_MIN);
s->SetName(_("Wah frequency offset in percent"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
}
S.EndMultiColumn();
}
void SetTrackStatusCommand::PopulateOrExchange(ShuttleGui & S)
{
SetTrackBase::PopulateOrExchange( S );
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol( 2 );
S.Optional( bHasTrackName ).TieTextBox( _("Name:"), mTrackName );
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol( 1 );
S.Optional( bHasSelected ).TieCheckBox( _("Selected"), bSelected );
S.Optional( bHasFocused ).TieCheckBox( _("Focused"), bFocused);
}
S.EndMultiColumn();
}
void ClickRemovalDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
vld.SetIncludes(wxArrayString(10, numbers));
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Click and Pop Removal by Craig DeForest"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
// Threshold
mThreshT = S.Id(ID_THRESH_TEXT).AddTextBox(_("Select threshold (lower is more sensitive):"),
wxT(""),
10);
mThreshT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mThreshS = S.Id(ID_THRESH_SLIDER).AddSlider(wxT(""),
0,
MAX_THRESHOLD);
mThreshS->SetName(_("Select threshold"));
mThreshS->SetRange(MIN_THRESHOLD, MAX_THRESHOLD);
#if defined(__WXGTK__)
// Force a minimum size since wxGTK allows it to go to zero
mThreshS->SetMinSize(wxSize(100, -1));
#endif
// Click width
mWidthT = S.Id(ID_WIDTH_TEXT).AddTextBox(_("Max spike width (higher is more sensitive):"),
wxT(""),
10);
mWidthT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mWidthS = S.Id(ID_WIDTH_SLIDER).AddSlider(wxT(""),
0,
MAX_CLICK_WIDTH);
mWidthS->SetName(_("Max spike width"));
mWidthS->SetRange(MIN_CLICK_WIDTH, MAX_CLICK_WIDTH);
#if defined(__WXGTK__)
// Force a minimum size since wxGTK allows it to go to zero
mWidthS->SetMinSize(wxSize(100, -1));
#endif
}
S.EndMultiColumn();
return;
}
void SelectTracksCommand::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol( 2 );
S.Optional( bHasFirstTrack).TieTextBox(_("First Track:"),mFirstTrack);
S.Optional( bHasNumTracks).TieTextBox(_("Track Count:"),mNumTracks);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxALIGN_CENTER);
{
// Always used, so no check box.
S.TieChoice( _("Mode:"), mMode, LocalizedStrings( kModes, nModes ));
}
S.EndMultiColumn();
}
void SetTrackAudioCommand::PopulateOrExchange(ShuttleGui & S)
{
SetTrackBase::PopulateOrExchange( S );
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol( 1 );
S.Optional( bHasMute ).TieCheckBox( _("Mute"), bMute);
S.Optional( bHasSolo ).TieCheckBox( _("Solo"), bSolo);
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol( 2 );
S.Optional( bHasGain ).TieSlider( _("Gain:"), mGain, 36.0,-36.0);
S.Optional( bHasPan ).TieSlider( _("Pan:"), mPan, 100.0, -100.0);
}
S.EndMultiColumn();
}
void BatchCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
mCommand->SetEditable(false);
mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
mEditParams->Enable( false ); // disable button as box is empty
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
mParameters->SetEditable(false);
}
S.EndMultiColumn();
S.StartStatic(_("C&hoose command"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
mChoices = S.Id(CommandsListID).AddListControl();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
for(int i=0;i<99;i++)
{
mChoices->InsertItem( i, wxString::Format(wxT("Item%02i"),i));
}
PopulateCommandList();
SetSize(350, 400);
SetSizeHints(GetSize());
Center();
}
