void PCB_BASE_FRAME::ResetTextSize( BOARD_ITEM* aItem, wxDC* aDC ) { wxSize newSize; int newThickness; if( aItem->Type() == PCB_TEXT_T ) { newSize = GetDesignSettings().m_PcbTextSize; newThickness = GetDesignSettings().m_PcbTextWidth; TEXTE_PCB* text = static_cast<TEXTE_PCB*>( aItem ); // Exit if there's nothing to do if( text->GetTextSize() == newSize && text->GetThickness() == newThickness ) return; SaveCopyInUndoList( text, UR_CHANGED ); text->SetTextSize( newSize ); text->SetThickness( newThickness ); } else if( aItem->Type() == PCB_MODULE_TEXT_T ) { newSize = GetDesignSettings().m_ModuleTextSize; newThickness = GetDesignSettings().m_ModuleTextWidth; TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( aItem ); // Exit if there's nothing to do if( text->GetTextSize() == newSize && text->GetThickness() == newThickness ) return; SaveCopyInUndoList( text->GetParent(), UR_CHANGED ); text->SetTextSize( newSize ); text->SetThickness( newThickness ); } else return; if( aDC ) m_canvas->Refresh(); OnModify(); }
void DRC::testTexts() { std::vector<wxPoint> textShape; // a buffer to store the text shape (set of segments) std::vector<D_PAD*> padList = m_pcb->GetPads(); // Test text areas for vias, tracks and pads inside text areas for( BOARD_ITEM* item = m_pcb->m_Drawings; item; item = item->Next() ) { // Drc test only items on copper layers if( ! IsCopperLayer( item->GetLayer() ) ) continue; // only texts on copper layers are tested if( item->Type() != PCB_TEXT_T ) continue; textShape.clear(); // So far the bounding box makes up the text-area TEXTE_PCB* text = (TEXTE_PCB*) item; text->TransformTextShapeToSegmentList( textShape ); if( textShape.size() == 0 ) // Should not happen (empty text?) continue; for( TRACK* track = m_pcb->m_Track; track != NULL; track = track->Next() ) { if( ! track->IsOnLayer( item->GetLayer() ) ) continue; // Test the distance between each segment and the current track/via int min_dist = ( track->GetWidth() + text->GetThickness() ) /2 + track->GetClearance(NULL); if( track->Type() == PCB_TRACE_T ) { SEG segref( track->GetStart(), track->GetEnd() ); // Error condition: Distance between text segment and track segment is // smaller than the clearance of the segment for( unsigned jj = 0; jj < textShape.size(); jj += 2 ) { SEG segtest( textShape[jj], textShape[jj+1] ); int dist = segref.Distance( segtest ); if( dist < min_dist ) { addMarkerToPcb( fillMarker( track, text, DRCE_TRACK_INSIDE_TEXT, m_currentMarker ) ); m_currentMarker = nullptr; break; } } } else if( track->Type() == PCB_VIA_T ) { // Error condition: Distance between text segment and via is // smaller than the clearance of the via for( unsigned jj = 0; jj < textShape.size(); jj += 2 ) { SEG segtest( textShape[jj], textShape[jj+1] ); if( segtest.PointCloserThan( track->GetPosition(), min_dist ) ) { addMarkerToPcb( fillMarker( track, text, DRCE_VIA_INSIDE_TEXT, m_currentMarker ) ); m_currentMarker = nullptr; break; } } } } // Test pads for( unsigned ii = 0; ii < padList.size(); ii++ ) { D_PAD* pad = padList[ii]; if( ! pad->IsOnLayer( item->GetLayer() ) ) continue; wxPoint shape_pos = pad->ShapePos(); for( unsigned jj = 0; jj < textShape.size(); jj += 2 ) { /* In order to make some calculations more easier or faster, * pads and tracks coordinates will be made relative * to the segment origin */ wxPoint origin = textShape[jj]; // origin will be the origin of other coordinates m_segmEnd = textShape[jj+1] - origin; wxPoint delta = m_segmEnd; m_segmAngle = 0; // for a non horizontal or vertical segment Compute the segment angle // in tenths of degrees and its length if( delta.x || delta.y ) // delta.x == delta.y == 0 for vias { // Compute the segment angle in 0,1 degrees m_segmAngle = ArcTangente( delta.y, delta.x ); // Compute the segment length: we build an equivalent rotated segment, // this segment is horizontal, therefore dx = length RotatePoint( &delta, m_segmAngle ); // delta.x = length, delta.y = 0 } m_segmLength = delta.x; m_padToTestPos = shape_pos - origin; if( !checkClearanceSegmToPad( pad, text->GetThickness(), pad->GetClearance(NULL) ) ) { addMarkerToPcb( fillMarker( pad, text, DRCE_PAD_INSIDE_TEXT, m_currentMarker ) ); m_currentMarker = nullptr; break; } } } } }
int DRAWING_TOOL::PlaceDXF( const TOOL_EVENT& aEvent ) { if( !m_frame->GetModel() ) return 0; DIALOG_DXF_IMPORT dlg( m_frame ); int dlgResult = dlg.ShowModal(); const std::list<BOARD_ITEM*>& list = dlg.GetImportedItems(); if( dlgResult != wxID_OK || list.empty() ) return 0; VECTOR2I cursorPos = m_controls->GetCursorPosition(); VECTOR2I delta = cursorPos - list.front()->GetPosition(); // Add a VIEW_GROUP that serves as a preview for the new item SELECTION preview( m_view ); BOARD_COMMIT commit( m_frame ); // Build the undo list & add items to the current view for( auto item : list ) { assert( item->Type() == PCB_LINE_T || item->Type() == PCB_TEXT_T ); preview.Add( item ); } BOARD_ITEM* firstItem = preview.Front(); m_view->Add( &preview ); m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); m_controls->ShowCursor( true ); m_controls->SetSnapping( true ); SCOPED_DRAW_MODE scopedDrawMode( m_mode, MODE::DXF ); Activate(); // Main loop: keep receiving events while( OPT_TOOL_EVENT evt = Wait() ) { cursorPos = m_controls->GetCursorPosition(); if( evt->IsMotion() ) { delta = cursorPos - firstItem->GetPosition(); for( auto item : preview ) item->Move( wxPoint( delta.x, delta.y ) ); m_view->Update( &preview ); } else if( evt->Category() == TC_COMMAND ) { // TODO it should be handled by EDIT_TOOL, so add items and select? if( evt->IsAction( &COMMON_ACTIONS::rotate ) ) { for( auto item : preview ) item->Rotate( wxPoint( cursorPos.x, cursorPos.y ), m_frame->GetRotationAngle() ); m_view->Update( &preview ); } else if( evt->IsAction( &COMMON_ACTIONS::flip ) ) { for( auto item : preview ) item->Flip( wxPoint( cursorPos.x, cursorPos.y ) ); m_view->Update( &preview ); } else if( evt->IsCancel() || evt->IsActivate() ) { preview.FreeItems(); break; } } else if ( evt->IsClick( BUT_RIGHT ) ) { showContextMenu(); } else if( evt->IsClick( BUT_LEFT ) ) { // Place the drawing BOARD_ITEM_CONTAINER* parent = m_frame->GetModel(); for( auto item : preview ) { if( m_editModules ) { // Modules use different types for the same things, // so we need to convert imported items to appropriate classes. BOARD_ITEM* converted = NULL; switch( item->Type() ) { case PCB_TEXT_T: { TEXTE_PCB* text = static_cast<TEXTE_PCB*>( item ); TEXTE_MODULE* textMod = new TEXTE_MODULE( (MODULE*) parent ); // Assignment operator also copies the item PCB_TEXT_T type, // so it cannot be added to a module which handles PCB_MODULE_TEXT_T textMod->SetPosition( text->GetPosition() ); textMod->SetText( text->GetText() ); textMod->SetSize( text->GetSize() ); textMod->SetThickness( text->GetThickness() ); textMod->SetOrientation( text->GetOrientation() ); textMod->SetTextPosition( text->GetTextPosition() ); textMod->SetSize( text->GetSize() ); textMod->SetMirrored( text->IsMirrored() ); textMod->SetAttributes( text->GetAttributes() ); textMod->SetItalic( text->IsItalic() ); textMod->SetBold( text->IsBold() ); textMod->SetHorizJustify( text->GetHorizJustify() ); textMod->SetVertJustify( text->GetVertJustify() ); textMod->SetMultilineAllowed( text->IsMultilineAllowed() ); converted = textMod; break; } case PCB_LINE_T: { DRAWSEGMENT* seg = static_cast<DRAWSEGMENT*>( item ); EDGE_MODULE* modSeg = new EDGE_MODULE( (MODULE*) parent ); // Assignment operator also copies the item PCB_LINE_T type, // so it cannot be added to a module which handles PCB_MODULE_EDGE_T modSeg->SetWidth( seg->GetWidth() ); modSeg->SetStart( seg->GetStart() ); modSeg->SetEnd( seg->GetEnd() ); modSeg->SetAngle( seg->GetAngle() ); modSeg->SetShape( seg->GetShape() ); modSeg->SetType( seg->GetType() ); modSeg->SetBezControl1( seg->GetBezControl1() ); modSeg->SetBezControl2( seg->GetBezControl2() ); modSeg->SetBezierPoints( seg->GetBezierPoints() ); modSeg->SetPolyPoints( seg->GetPolyPoints() ); converted = modSeg; break; } default: assert( false ); break; } if( converted ) converted->SetLayer( item->GetLayer() ); delete item; item = converted; } if( item ) commit.Add( item ); } commit.Push( _( "Place a DXF drawing" ) ); break; } } preview.Clear(); m_controls->ShowCursor( false ); m_controls->SetSnapping( false ); m_controls->SetAutoPan( false ); m_controls->CaptureCursor( false ); m_view->Remove( &preview ); return 0; }