void PCB_BASE_FRAME::ResetTextSize( BOARD_ITEM* aItem, wxDC* aDC )
{
wxSize newSize;
int newThickness;
if( aItem->Type() == PCB_TEXT_T )
{
newSize = GetDesignSettings().m_PcbTextSize;
newThickness = GetDesignSettings().m_PcbTextWidth;
TEXTE_PCB* text = static_cast<TEXTE_PCB*>( aItem );
// Exit if there's nothing to do
if( text->GetTextSize() == newSize && text->GetThickness() == newThickness )
return;
SaveCopyInUndoList( text, UR_CHANGED );
text->SetTextSize( newSize );
text->SetThickness( newThickness );
}
else if( aItem->Type() == PCB_MODULE_TEXT_T )
{
newSize = GetDesignSettings().m_ModuleTextSize;
newThickness = GetDesignSettings().m_ModuleTextWidth;
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( aItem );
// Exit if there's nothing to do
if( text->GetTextSize() == newSize && text->GetThickness() == newThickness )
return;
SaveCopyInUndoList( text->GetParent(), UR_CHANGED );
text->SetTextSize( newSize );
text->SetThickness( newThickness );
}
else
return;
if( aDC )
m_canvas->Refresh();
OnModify();
}
void DRC::testTexts()
{
std::vector<wxPoint> textShape; // a buffer to store the text shape (set of segments)
std::vector<D_PAD*> padList = m_pcb->GetPads();
// Test text areas for vias, tracks and pads inside text areas
for( BOARD_ITEM* item = m_pcb->m_Drawings; item; item = item->Next() )
{
// Drc test only items on copper layers
if( ! IsCopperLayer( item->GetLayer() ) )
continue;
// only texts on copper layers are tested
if( item->Type() != PCB_TEXT_T )
continue;
textShape.clear();
// So far the bounding box makes up the text-area
TEXTE_PCB* text = (TEXTE_PCB*) item;
text->TransformTextShapeToSegmentList( textShape );
if( textShape.size() == 0 ) // Should not happen (empty text?)
continue;
for( TRACK* track = m_pcb->m_Track; track != NULL; track = track->Next() )
{
if( ! track->IsOnLayer( item->GetLayer() ) )
continue;
// Test the distance between each segment and the current track/via
int min_dist = ( track->GetWidth() + text->GetThickness() ) /2 +
track->GetClearance(NULL);
if( track->Type() == PCB_TRACE_T )
{
SEG segref( track->GetStart(), track->GetEnd() );
// Error condition: Distance between text segment and track segment is
// smaller than the clearance of the segment
for( unsigned jj = 0; jj < textShape.size(); jj += 2 )
{
SEG segtest( textShape[jj], textShape[jj+1] );
int dist = segref.Distance( segtest );
if( dist < min_dist )
{
addMarkerToPcb( fillMarker( track, text,
DRCE_TRACK_INSIDE_TEXT,
m_currentMarker ) );
m_currentMarker = nullptr;
break;
}
}
}
else if( track->Type() == PCB_VIA_T )
{
// Error condition: Distance between text segment and via is
// smaller than the clearance of the via
for( unsigned jj = 0; jj < textShape.size(); jj += 2 )
{
SEG segtest( textShape[jj], textShape[jj+1] );
if( segtest.PointCloserThan( track->GetPosition(), min_dist ) )
{
addMarkerToPcb( fillMarker( track, text,
DRCE_VIA_INSIDE_TEXT, m_currentMarker ) );
m_currentMarker = nullptr;
break;
}
}
}
}
// Test pads
for( unsigned ii = 0; ii < padList.size(); ii++ )
{
D_PAD* pad = padList[ii];
if( ! pad->IsOnLayer( item->GetLayer() ) )
continue;
wxPoint shape_pos = pad->ShapePos();
for( unsigned jj = 0; jj < textShape.size(); jj += 2 )
{
/* In order to make some calculations more easier or faster,
* pads and tracks coordinates will be made relative
* to the segment origin
*/
wxPoint origin = textShape[jj]; // origin will be the origin of other coordinates
m_segmEnd = textShape[jj+1] - origin;
wxPoint delta = m_segmEnd;
m_segmAngle = 0;
// for a non horizontal or vertical segment Compute the segment angle
// in tenths of degrees and its length
if( delta.x || delta.y ) // delta.x == delta.y == 0 for vias
{
// Compute the segment angle in 0,1 degrees
m_segmAngle = ArcTangente( delta.y, delta.x );
// Compute the segment length: we build an equivalent rotated segment,
// this segment is horizontal, therefore dx = length
RotatePoint( &delta, m_segmAngle ); // delta.x = length, delta.y = 0
}
m_segmLength = delta.x;
m_padToTestPos = shape_pos - origin;
if( !checkClearanceSegmToPad( pad, text->GetThickness(),
pad->GetClearance(NULL) ) )
{
addMarkerToPcb( fillMarker( pad, text,
DRCE_PAD_INSIDE_TEXT, m_currentMarker ) );
m_currentMarker = nullptr;
break;
}
}
}
}
}
int DRAWING_TOOL::PlaceDXF( const TOOL_EVENT& aEvent )
{
if( !m_frame->GetModel() )
return 0;
DIALOG_DXF_IMPORT dlg( m_frame );
int dlgResult = dlg.ShowModal();
const std::list<BOARD_ITEM*>& list = dlg.GetImportedItems();
if( dlgResult != wxID_OK || list.empty() )
return 0;
VECTOR2I cursorPos = m_controls->GetCursorPosition();
VECTOR2I delta = cursorPos - list.front()->GetPosition();
// Add a VIEW_GROUP that serves as a preview for the new item
SELECTION preview( m_view );
BOARD_COMMIT commit( m_frame );
// Build the undo list & add items to the current view
for( auto item : list )
{
assert( item->Type() == PCB_LINE_T || item->Type() == PCB_TEXT_T );
preview.Add( item );
}
BOARD_ITEM* firstItem = preview.Front();
m_view->Add( &preview );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_controls->ShowCursor( true );
m_controls->SetSnapping( true );
SCOPED_DRAW_MODE scopedDrawMode( m_mode, MODE::DXF );
Activate();
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
cursorPos = m_controls->GetCursorPosition();
if( evt->IsMotion() )
{
delta = cursorPos - firstItem->GetPosition();
for( auto item : preview )
item->Move( wxPoint( delta.x, delta.y ) );
m_view->Update( &preview );
}
else if( evt->Category() == TC_COMMAND )
{
// TODO it should be handled by EDIT_TOOL, so add items and select?
if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
{
for( auto item : preview )
item->Rotate( wxPoint( cursorPos.x, cursorPos.y ),
m_frame->GetRotationAngle() );
m_view->Update( &preview );
}
else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
{
for( auto item : preview )
item->Flip( wxPoint( cursorPos.x, cursorPos.y ) );
m_view->Update( &preview );
}
else if( evt->IsCancel() || evt->IsActivate() )
{
preview.FreeItems();
break;
}
}
else if ( evt->IsClick( BUT_RIGHT ) )
{
showContextMenu();
}
else if( evt->IsClick( BUT_LEFT ) )
{
// Place the drawing
BOARD_ITEM_CONTAINER* parent = m_frame->GetModel();
for( auto item : preview )
{
if( m_editModules )
{
// Modules use different types for the same things,
// so we need to convert imported items to appropriate classes.
BOARD_ITEM* converted = NULL;
switch( item->Type() )
{
case PCB_TEXT_T:
{
TEXTE_PCB* text = static_cast<TEXTE_PCB*>( item );
TEXTE_MODULE* textMod = new TEXTE_MODULE( (MODULE*) parent );
// Assignment operator also copies the item PCB_TEXT_T type,
// so it cannot be added to a module which handles PCB_MODULE_TEXT_T
textMod->SetPosition( text->GetPosition() );
textMod->SetText( text->GetText() );
textMod->SetSize( text->GetSize() );
textMod->SetThickness( text->GetThickness() );
textMod->SetOrientation( text->GetOrientation() );
textMod->SetTextPosition( text->GetTextPosition() );
textMod->SetSize( text->GetSize() );
textMod->SetMirrored( text->IsMirrored() );
textMod->SetAttributes( text->GetAttributes() );
textMod->SetItalic( text->IsItalic() );
textMod->SetBold( text->IsBold() );
textMod->SetHorizJustify( text->GetHorizJustify() );
textMod->SetVertJustify( text->GetVertJustify() );
textMod->SetMultilineAllowed( text->IsMultilineAllowed() );
converted = textMod;
break;
}
case PCB_LINE_T:
{
DRAWSEGMENT* seg = static_cast<DRAWSEGMENT*>( item );
EDGE_MODULE* modSeg = new EDGE_MODULE( (MODULE*) parent );
// Assignment operator also copies the item PCB_LINE_T type,
// so it cannot be added to a module which handles PCB_MODULE_EDGE_T
modSeg->SetWidth( seg->GetWidth() );
modSeg->SetStart( seg->GetStart() );
modSeg->SetEnd( seg->GetEnd() );
modSeg->SetAngle( seg->GetAngle() );
modSeg->SetShape( seg->GetShape() );
modSeg->SetType( seg->GetType() );
modSeg->SetBezControl1( seg->GetBezControl1() );
modSeg->SetBezControl2( seg->GetBezControl2() );
modSeg->SetBezierPoints( seg->GetBezierPoints() );
modSeg->SetPolyPoints( seg->GetPolyPoints() );
converted = modSeg;
break;
}
default:
assert( false );
break;
}
if( converted )
converted->SetLayer( item->GetLayer() );
delete item;
item = converted;
}
if( item )
commit.Add( item );
}
commit.Push( _( "Place a DXF drawing" ) );
break;
}
}
preview.Clear();
m_controls->ShowCursor( false );
m_controls->SetSnapping( false );
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
m_view->Remove( &preview );
return 0;
}
