/**
* Function PlaceCells
* Initialize the matrix routing by setting obstacles for each occupied cell
* a cell set to HOLE is an obstacle for tracks and vias
* a cell set to VIA_IMPOSSIBLE is an obstacle for vias only.
* a cell set to CELL_is_EDGE is a frontier.
* Tracks and vias having the same net code as net_code are skipped
* (htey do not are obstacles)
*
* For single-sided Routing 1:
* BOTTOM side is used, and Route_Layer_BOTTOM = Route_Layer_TOP
*
* If flag == FORCE_PADS: all pads will be put in matrix as obstacles.
*/
void PlaceCells( BOARD* aPcb, int net_code, int flag )
{
int ux0 = 0, uy0 = 0, ux1, uy1, dx, dy;
int marge, via_marge;
LAYER_MSK layerMask;
// use the default NETCLASS?
NETCLASS* nc = aPcb->m_NetClasses.GetDefault();
int trackWidth = nc->GetTrackWidth();
int clearance = nc->GetClearance();
int viaSize = nc->GetViaDiameter();
marge = clearance + (trackWidth / 2);
via_marge = clearance + (viaSize / 2);
// Place PADS on matrix routing:
for( unsigned i = 0; i < aPcb->GetPadCount(); ++i )
{
D_PAD* pad = aPcb->GetPad( i );
if( net_code != pad->GetNet() || (flag & FORCE_PADS) )
{
::PlacePad( pad, HOLE, marge, WRITE_CELL );
}
::PlacePad( pad, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
// Place outlines of modules on matrix routing, if they are on a copper layer
// or on the edge layer
TRACK tmpSegm( NULL ); // A dummy track used to create segments.
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = (EDGE_MODULE*) item;
tmpSegm.SetLayer( edge->GetLayer() );
if( tmpSegm.GetLayer() == EDGE_N )
tmpSegm.SetLayer( UNDEFINED_LAYER );
tmpSegm.SetStart( edge->GetStart() );
tmpSegm.SetEnd( edge->GetEnd() );
tmpSegm.SetShape( edge->GetShape() );
tmpSegm.SetWidth( edge->GetWidth() );
tmpSegm.m_Param = edge->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( &tmpSegm, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
break;
default:
break;
}
}
}
// Place board outlines and texts on copper layers:
for( BOARD_ITEM* item = aPcb->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
{
DRAWSEGMENT* DrawSegm;
int type_cell = HOLE;
DrawSegm = (DRAWSEGMENT*) item;
tmpSegm.SetLayer( DrawSegm->GetLayer() );
if( DrawSegm->GetLayer() == EDGE_N )
{
tmpSegm.SetLayer( UNDEFINED_LAYER );
type_cell |= CELL_is_EDGE;
}
tmpSegm.SetStart( DrawSegm->GetStart() );
tmpSegm.SetEnd( DrawSegm->GetEnd() );
tmpSegm.SetShape( DrawSegm->GetShape() );
tmpSegm.SetWidth( DrawSegm->GetWidth() );
tmpSegm.m_Param = DrawSegm->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, type_cell, marge, WRITE_CELL );
}
break;
case PCB_TEXT_T:
{
TEXTE_PCB* PtText;
PtText = (TEXTE_PCB*) item;
if( PtText->GetText().Length() == 0 )
break;
EDA_RECT textbox = PtText->GetTextBox( -1 );
ux0 = textbox.GetX();
uy0 = textbox.GetY();
dx = textbox.GetWidth();
dy = textbox.GetHeight();
/* Put bounding box (rectangle) on matrix */
dx /= 2;
dy /= 2;
ux1 = ux0 + dx;
uy1 = uy0 + dy;
ux0 -= dx;
uy0 -= dy;
layerMask = GetLayerMask( PtText->GetLayer() );
TraceFilledRectangle( ux0 - marge, uy0 - marge, ux1 + marge,
uy1 + marge, PtText->GetOrientation(),
layerMask, HOLE, WRITE_CELL );
TraceFilledRectangle( ux0 - via_marge, uy0 - via_marge,
ux1 + via_marge, uy1 + via_marge,
PtText->GetOrientation(),
layerMask, VIA_IMPOSSIBLE, WRITE_OR_CELL );
}
break;
default:
break;
}
}
/* Put tracks and vias on matrix */
for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
{
if( net_code == track->GetNet() )
continue;
TraceSegmentPcb( track, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( track, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
}
int DRAWING_TOOL::PlaceDXF( const TOOL_EVENT& aEvent )
{
if( !m_frame->GetModel() )
return 0;
DIALOG_DXF_IMPORT dlg( m_frame );
int dlgResult = dlg.ShowModal();
const std::list<BOARD_ITEM*>& list = dlg.GetImportedItems();
if( dlgResult != wxID_OK || list.empty() )
return 0;
VECTOR2I cursorPos = m_controls->GetCursorPosition();
VECTOR2I delta = cursorPos - list.front()->GetPosition();
// Add a VIEW_GROUP that serves as a preview for the new item
SELECTION preview( m_view );
BOARD_COMMIT commit( m_frame );
// Build the undo list & add items to the current view
for( auto item : list )
{
assert( item->Type() == PCB_LINE_T || item->Type() == PCB_TEXT_T );
preview.Add( item );
}
BOARD_ITEM* firstItem = preview.Front();
m_view->Add( &preview );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_controls->ShowCursor( true );
m_controls->SetSnapping( true );
SCOPED_DRAW_MODE scopedDrawMode( m_mode, MODE::DXF );
Activate();
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
cursorPos = m_controls->GetCursorPosition();
if( evt->IsMotion() )
{
delta = cursorPos - firstItem->GetPosition();
for( auto item : preview )
item->Move( wxPoint( delta.x, delta.y ) );
m_view->Update( &preview );
}
else if( evt->Category() == TC_COMMAND )
{
// TODO it should be handled by EDIT_TOOL, so add items and select?
if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
{
for( auto item : preview )
item->Rotate( wxPoint( cursorPos.x, cursorPos.y ),
m_frame->GetRotationAngle() );
m_view->Update( &preview );
}
else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
{
for( auto item : preview )
item->Flip( wxPoint( cursorPos.x, cursorPos.y ) );
m_view->Update( &preview );
}
else if( evt->IsCancel() || evt->IsActivate() )
{
preview.FreeItems();
break;
}
}
else if ( evt->IsClick( BUT_RIGHT ) )
{
showContextMenu();
}
else if( evt->IsClick( BUT_LEFT ) )
{
// Place the drawing
BOARD_ITEM_CONTAINER* parent = m_frame->GetModel();
for( auto item : preview )
{
if( m_editModules )
{
// Modules use different types for the same things,
// so we need to convert imported items to appropriate classes.
BOARD_ITEM* converted = NULL;
switch( item->Type() )
{
case PCB_TEXT_T:
{
TEXTE_PCB* text = static_cast<TEXTE_PCB*>( item );
TEXTE_MODULE* textMod = new TEXTE_MODULE( (MODULE*) parent );
// Assignment operator also copies the item PCB_TEXT_T type,
// so it cannot be added to a module which handles PCB_MODULE_TEXT_T
textMod->SetPosition( text->GetPosition() );
textMod->SetText( text->GetText() );
textMod->SetSize( text->GetSize() );
textMod->SetThickness( text->GetThickness() );
textMod->SetOrientation( text->GetOrientation() );
textMod->SetTextPosition( text->GetTextPosition() );
textMod->SetSize( text->GetSize() );
textMod->SetMirrored( text->IsMirrored() );
textMod->SetAttributes( text->GetAttributes() );
textMod->SetItalic( text->IsItalic() );
textMod->SetBold( text->IsBold() );
textMod->SetHorizJustify( text->GetHorizJustify() );
textMod->SetVertJustify( text->GetVertJustify() );
textMod->SetMultilineAllowed( text->IsMultilineAllowed() );
converted = textMod;
break;
}
case PCB_LINE_T:
{
DRAWSEGMENT* seg = static_cast<DRAWSEGMENT*>( item );
EDGE_MODULE* modSeg = new EDGE_MODULE( (MODULE*) parent );
// Assignment operator also copies the item PCB_LINE_T type,
// so it cannot be added to a module which handles PCB_MODULE_EDGE_T
modSeg->SetWidth( seg->GetWidth() );
modSeg->SetStart( seg->GetStart() );
modSeg->SetEnd( seg->GetEnd() );
modSeg->SetAngle( seg->GetAngle() );
modSeg->SetShape( seg->GetShape() );
modSeg->SetType( seg->GetType() );
modSeg->SetBezControl1( seg->GetBezControl1() );
modSeg->SetBezControl2( seg->GetBezControl2() );
modSeg->SetBezierPoints( seg->GetBezierPoints() );
modSeg->SetPolyPoints( seg->GetPolyPoints() );
converted = modSeg;
break;
}
default:
assert( false );
break;
}
if( converted )
converted->SetLayer( item->GetLayer() );
delete item;
item = converted;
}
if( item )
commit.Add( item );
}
commit.Push( _( "Place a DXF drawing" ) );
break;
}
}
preview.Clear();
m_controls->ShowCursor( false );
m_controls->SetSnapping( false );
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
m_view->Remove( &preview );
return 0;
}
