void ToolManager::Reset()
{
int ndx;
// Disconnect all docked bars
for( ndx = 0; ndx < ToolBarCount; ndx++ )
{
wxWindow *parent;
ToolDock *dock;
ToolBar *bar = mBars[ ndx ];
// Disconnect the bar
if( bar->IsDocked() )
{
bar->GetDock()->Undock( bar );
parent = NULL;
}
else
{
parent = bar->GetParent();
}
if( ndx == SelectionBarID )
{
dock = mBotDock;
wxCommandEvent e;
bar->GetEventHandler()->ProcessEvent(e);
}
else
{
dock = mTopDock;
bar->ReCreateButtons();
}
bar->EnableDisableButtons();
#if 0
if( bar->IsResizable() )
{
bar->SetSize(bar->GetBestFittingSize());
}
#endif
dock->Dock( bar );
Expose( ndx, ndx == DeviceBarID ? false : true );
if( parent )
{
parent->Destroy();
}
}
LayoutToolBars();
Updated();
}
void ToolManager::Reset()
{
int ndx;
// The mInputMeter and mOutputMeter may be in use if audio is playing
// when this happens.
gAudioIO->SetMeters( NULL, NULL );
// Disconnect all docked bars
for( ndx = 0; ndx < ToolBarCount; ndx++ )
{
wxWindow *parent;
ToolDock *dock;
ToolBar *bar = mBars[ ndx ];
// Disconnect the bar
if( bar->IsDocked() )
{
bar->GetDock()->Undock( bar );
parent = NULL;
}
else
{
parent = bar->GetParent();
}
if( ndx == SelectionBarID )
{
dock = mBotDock;
wxCommandEvent e;
bar->GetEventHandler()->ProcessEvent(e);
}
else
{
dock = mTopDock;
bar->ReCreateButtons();
}
bar->EnableDisableButtons();
#if 0
if( bar->IsResizable() )
{
bar->SetSize(bar->GetBestFittingSize());
}
#endif
dock->Dock( bar );
Expose( ndx, true );
if( parent )
{
parent->Destroy();
}
}
// TODO:??
// If audio was playing, we stopped the VU meters,
// It would be nice to show them again, but hardly essential as
// they will show up again on the next play.
// SetVUMeters(AudacityProject *p);
LayoutToolBars();
Updated();
}
//
// Determine the location and bar before which a new bar would be placed
//
// 'rect' will be the rectangle for the dock marker.
int ToolDock::PositionBar( ToolBar *t, wxPoint & pos, wxRect & rect )
{
struct
{
wxRect rect;
wxSize min;
} tinfo[ ToolBarCount + 1 ];
wxRect stack[ ToolBarCount + 1 ];
wxPoint cpos, lpos;
int ct, lt = 0;
int ndx, stkcnt = 0;
int tindx = -1;
int cnt = mDockedBars.GetCount();
int width, height;
// Get size of our parent since we haven't been sized yet
GetParent()->GetClientSize( &width, &height );
width -= toolbarGap;
height -= toolbarGap;
// Set initial stack entry to maximum size
stack[ 0 ].SetX( toolbarGap );
stack[ 0 ].SetY( toolbarGap );
// The stack width and height are the remaining width and height.
stack[ 0 ].SetWidth( width );
stack[ 0 ].SetHeight( height );
// Process all docked and visible toolbars
//
// Careful...slightly different from above in that we expect to
// process one more bar than is currently docked (<= in for)
for (ndx = 0, ct = 0; ndx <= cnt; ndx++, ct++)
{
// If last entry, then it is the
if (ndx == cnt)
{
// ...so check to see if the new bar has been placed yet
if (tindx == -1)
{
// Add the new bars' dimensions to the mix
tinfo[ct].rect = t->GetRect();
tinfo[ct].min = t->GetDockedSize();
tindx = ct;
}
}
else
{
// Cache toolbar pointer
ToolBar *b = (ToolBar *)mDockedBars[ndx];
// Remember current bars' dimensions
tinfo[ct].rect = b->GetRect();
tinfo[ct].min = b->GetSize();
// Maybe insert the new bar if it hasn't already been done
// and is in the right place.
if (tindx == -1)
{
wxRect r;
// Get bar rect and make gap part of it
r.SetPosition(b->GetParent()->ClientToScreen(b->GetPosition()));
r.SetSize(b->IsResizable() ? b->GetSize() : b->GetSize());
r.width += toolbarGap;
r.height += toolbarGap;
// Does the location fall within this bar?
if (r.Contains(pos) || pos.y <= r.y)
{
// Add the new bars' dimensions to the mix
tinfo[ct].rect = t->GetRect();
tinfo[ct].min = t->GetDockedSize();
tindx = ct;
ndx--;
}
}
}
// Get and cache the toolbar sizes
wxSize sz = tinfo[ct].min;
int tw = sz.GetWidth() + toolbarGap;
int th = sz.GetHeight() + toolbarGap;
// This loop reduces stkcnt until it gives a box
// that we fit in.
while (stkcnt > 0)
{
// Get out if it will fit
bool bTooWide = tw > stack[stkcnt].GetWidth();
// We'd like to be able to add a tall toolbar in at the start of a row,
// even if there isn't enough height for it.
// If so, we'd have to at least change how we calculate 'bTooHigh'.
bool bTooHigh = th > stack[stkcnt].GetHeight();
//bTooHigh &= stack[stkcnt].GetWidth() < (width - toolbarGap);
//bTooHigh = false;
if (!bTooWide && !bTooHigh)
break;
stkcnt--;
}
// The current stack entry position is where the bar
// will be placed.
cpos = stack[stkcnt].GetPosition();
// We'll be using at least a portion of this stack entry, so
// adjust the location and size. It is possible that these
// will become zero if this entry and the toolbar have the
// same height. This is (?) what we want as it will be destacked
// in the next iteration.
stack[stkcnt].SetY(stack[stkcnt].GetY() + th);
stack[stkcnt].SetHeight(stack[stkcnt].GetHeight() - th);
// Calc the next possible horizontal location.
int x = cpos.x + tw;
// Add a new stack entry
stkcnt++;
stack[stkcnt].SetX(x);
stack[stkcnt].SetY(cpos.y);
stack[stkcnt].SetWidth(width - x);
stack[stkcnt].SetHeight(th);
// Position the previous toolbar
if (ndx > 0)
{
// Place the unstretched toolbar
tinfo[lt].rect.x = lpos.x;
tinfo[lt].rect.y = lpos.y;
}
// Remember for next iteration
lt = ct;
lpos = cpos;
// If we've placed it, we're done.
if (tindx != -1)
{
tinfo[tindx].rect.x = cpos.x;
tinfo[tindx].rect.y = cpos.y;
break;
}
}
// Fill in the final position
rect = tinfo[ tindx ].rect;
return tindx;
}
//
// Determine the location and bar before which a new bar would be placed
//
int ToolDock::PositionBar( ToolBar *t, wxPoint & pos, wxRect & rect )
{
struct
{
wxRect rect;
wxSize min;
} tinfo[ ToolBarCount + 1 ];
wxRect stack[ ToolBarCount + 1 ];
wxPoint cpos, lpos;
int ct, lt = 0;
int ndx, stkcnt = 0;
int tindx = -1;
int cnt = mDockedBars.GetCount();
int width, height;
// Get size of our parent since we haven't been sized yet
GetParent()->GetClientSize( &width, &height );
width -= toolbarGap;
height -= toolbarGap;
// Set initial stack entry to maximum size
stack[ 0 ].SetX( toolbarGap );
stack[ 0 ].SetY( toolbarGap );
stack[ 0 ].SetWidth( width );
stack[ 0 ].SetHeight( height );
// Process all docked and visible toolbars
//
// Careful...slightly different from above in that we expect to
// process one more bar than is currently docked (<= in for)
for( ndx = 0, ct = 0; ndx <= cnt; ndx++, ct++ )
{
// We're on the last entry...
if( ndx == cnt )
{
// ...so check to see if the new bar has been placed yet
if( tindx == -1 )
{
// Add the new bars' dimensions to the mix
tinfo[ ct ].rect = t->GetRect();
tinfo[ ct ].min = t->GetMinSize();
tindx = ct;
}
}
else
{
// Cache toolbar pointer
ToolBar *b = (ToolBar *) mDockedBars[ ndx ];
// Remember current bars' dimensions
tinfo[ ct ].rect = b->GetRect();
tinfo[ ct ].min = b->GetSize();
// Insert the new bar if it hasn't already been done
if( tindx == -1 )
{
wxRect r;
// Get bar rect and make gap part of it
r.SetPosition( b->GetParent()->ClientToScreen( b->GetPosition() ) );
r.SetSize( b->IsResizable() ? b->GetSize() : b->GetSize() );
r.width += toolbarGap;
r.height += toolbarGap;
// Does the location fall within this bar?
if( r.Contains( pos ) || pos.y <= r.y )
{
// Add the new bars' dimensions to the mix
tinfo[ ct ].rect = t->GetRect();
tinfo[ ct ].min = t->GetSize();
tindx = ct;
ndx--;
}
}
}
// Get and cache the toolbar sizes
wxSize sz = tinfo[ ct ].min;
int tw = sz.GetWidth() + toolbarGap;
int th = sz.GetHeight() + toolbarGap;
// Will this one fit in remaining horizontal space?
if( ( tw > stack[ stkcnt ].GetWidth() ) ||
( th > stack[ stkcnt ].GetHeight() ) )
{
// Destack entries until one is found in which this bar
// will fit or until we run out of stacked entries
while( stkcnt > 0 )
{
stkcnt--;
// Get out if it will fit
if( ( tw <= stack[ stkcnt ].GetWidth() ) &&
( th <= stack[ stkcnt ].GetHeight() ) )
{
break;
}
}
}
// The current stack entry position is where the bar
// will be placed.
cpos = stack[ stkcnt ].GetPosition();
// We'll be using at least a portion of this stack entry, so
// adjust the location and size. It is possible that these
// will become zero if this entry and the toolbar have the
// same height. This is what we want as it will be destacked
// in the next iteration.
stack[ stkcnt ].SetY( stack[ stkcnt ].GetY() + th );
stack[ stkcnt ].SetHeight( stack[ stkcnt ].GetHeight() - th );
// Calc the next possible horizontal location.
int x = cpos.x + tw;
// Add a new stack entry
stkcnt++;
stack[ stkcnt ].SetX( x );
stack[ stkcnt ].SetY( cpos.y );
stack[ stkcnt ].SetWidth( width - x );
stack[ stkcnt ].SetHeight( th );
// Position the previous toolbar
if( ndx > 0 )
{
// Place the unstretched toolbar
tinfo[ lt ].rect.x = lpos.x;
tinfo[ lt ].rect.y = lpos.y;
}
// Place and stretch the final toolbar
if( ndx == cnt )
{
tinfo[ ct ].rect.x = cpos.x;
tinfo[ ct ].rect.y = cpos.y;
}
// Remember for next iteration
lt = ct;
lpos = cpos;
}
// Fill in the final position
rect = tinfo[ tindx ].rect;
return tindx;
}
void ToolManager::Reset()
{
// Disconnect all docked bars
for ( const auto &entry : DefaultConfigTable )
{
int ndx = entry.barID;
ToolBar *bar = mBars[ ndx ].get();
ToolBarConfiguration::Position position {
(entry.rightOf == NoBarID) ? nullptr : mBars[ entry.rightOf ].get(),
(entry.below == NoBarID) ? nullptr : mBars[ entry.below ].get()
};
wxWindow *floater;
ToolDock *dock;
bool expose = true;
// Disconnect the bar
if( bar->IsDocked() )
{
bar->GetDock()->Undock( bar );
floater = NULL;
}
else
{
floater = bar->GetParent();
}
if (ndx == SelectionBarID
#ifdef EXPERIMENTAL_SPECTRAL_EDITING
|| ndx == SpectralSelectionBarID
#endif
)
{
dock = mBotDock;
wxCommandEvent e;
bar->GetEventHandler()->ProcessEvent(e);
}
else
{
dock = mTopDock;
bar->ReCreateButtons();
}
bar->EnableDisableButtons();
#if 0
if( bar->IsResizable() )
{
bar->SetSize(bar->GetBestFittingSize());
}
#endif
if( ndx == MeterBarID
#ifdef EXPERIMENTAL_SPECTRAL_EDITING
|| ndx == SpectralSelectionBarID
#endif
|| ndx == ScrubbingBarID
)
{
expose = false;
}
if( dock != NULL )
{
// when we dock, we reparent, so bar is no longer a child of floater.
dock->Dock( bar, false, position );
Expose( ndx, expose );
//OK (and good) to DELETE floater, as bar is no longer in it.
if( floater )
floater->Destroy();
}
else
{
// The (tool)bar has a dragger window round it, the floater.
// in turn floater will have mParent (the entire App) as its
// parent.
// Maybe construct a NEW floater
// this happens if we have just been bounced out of a dock.
if( floater == NULL ) {
wxASSERT(mParent);
floater = safenew ToolFrame( mParent, this, bar, wxPoint(-1,-1) );
bar->Reparent( floater );
}
// This bar is undocked and invisible.
// We are doing a reset toolbars, so even the invisible undocked bars should
// be moved somewhere sensible. Put bar near center of window.
// If there were multiple hidden toobars the ndx * 10 adjustment means
// they won't overlap too much.
floater->CentreOnParent( );
floater->Move( floater->GetPosition() + wxSize( ndx * 10 - 200, ndx * 10 ));
bar->SetDocked( NULL, false );
Expose( ndx, false );
}
}
// TODO:??
// If audio was playing, we stopped the VU meters,
// It would be nice to show them again, but hardly essential as
// they will show up again on the next play.
// SetVUMeters(AudacityProject *p);
LayoutToolBars();
Updated();
}
