//- (optionally destructively) construct from components
Foam::mapDistributePolyMesh::mapDistributePolyMesh
(
const polyMesh& mesh,
const label nOldPoints,
const label nOldFaces,
const label nOldCells,
labelList& oldPatchStarts,
labelList& oldPatchNMeshPoints,
labelListList& subPointMap,
labelListList& subFaceMap,
labelListList& subCellMap,
labelListList& subPatchMap,
labelListList& constructPointMap,
labelListList& constructFaceMap,
labelListList& constructCellMap,
labelListList& constructPatchMap,
const bool reUse // clone or reuse
)
:
mesh_(mesh),
nOldPoints_(nOldPoints),
nOldFaces_(nOldFaces),
nOldCells_(nOldCells),
oldPatchSizes_(oldPatchStarts.size()),
oldPatchStarts_(oldPatchStarts, reUse),
oldPatchNMeshPoints_(oldPatchNMeshPoints, reUse),
pointMap_(mesh.nPoints(), subPointMap, constructPointMap, reUse),
faceMap_(mesh.nFaces(), subFaceMap, constructFaceMap, reUse),
cellMap_(mesh.nCells(), subCellMap, constructCellMap, reUse),
patchMap_(mesh.boundaryMesh().size(), subPatchMap, constructPatchMap, reUse)
{
calcPatchSizes();
}
Foam::labelList Foam::structuredRenumber::renumber
(
const polyMesh& mesh,
const pointField& points
) const
{
if (points.size() != mesh.nCells())
{
FatalErrorInFunction
<< "Number of points " << points.size()
<< " should equal the number of cells " << mesh.nCells()
<< exit(FatalError);
}
const polyBoundaryMesh& pbm = mesh.boundaryMesh();
const labelHashSet patchIDs(pbm.patchSet(patches_));
label nFaces = 0;
forAllConstIter(labelHashSet, patchIDs, iter)
{
nFaces += pbm[iter.key()].size();
}
// Extract a submesh.
labelHashSet patchCells(2*nFaces);
forAllConstIter(labelHashSet, patchIDs, iter)
{
const labelUList& fc = pbm[iter.key()].faceCells();
forAll(fc, i)
{
patchCells.insert(fc[i]);
}
}
Foam::labelList Foam::metisDecomp::decompose
(
const polyMesh& mesh,
const pointField& points,
const scalarField& pointWeights
)
{
if (points.size() != mesh.nCells())
{
FatalErrorIn
(
"metisDecomp::decompose(const pointField&,const scalarField&)"
) << "Can use this decomposition method only for the whole mesh"
<< endl
<< "and supply one coordinate (cellCentre) for every cell." << endl
<< "The number of coordinates " << points.size() << endl
<< "The number of cells in the mesh " << mesh.nCells()
<< exit(FatalError);
}
CompactListList<label> cellCells;
calcCellCells(mesh, identity(mesh.nCells()), mesh.nCells(), cellCells);
// Decompose using default weights
labelList decomp;
decompose(cellCells.m(), cellCells.offsets(), pointWeights, decomp);
return decomp;
}
Foam::label Foam::checkMeshQuality
(
const polyMesh& mesh,
const dictionary& dict
)
{
label noFailedChecks = 0;
{
faceSet faces(mesh, "meshQualityFaces", mesh.nFaces()/100+1);
motionSmoother::checkMesh(false, mesh, dict, faces);
label nFaces = returnReduce(faces.size(), sumOp<label>());
if (nFaces > 0)
{
noFailedChecks++;
Info<< " <<Writing " << nFaces
<< " faces in error to set " << faces.name() << endl;
faces.instance() = mesh.pointsInstance();
faces.write();
}
}
return noFailedChecks;
}
// Write set to VTK readable files
void writeVTK
(
const polyMesh& mesh,
const topoSet& currentSet,
const fileName& vtkName
)
{
if (isA<faceSet>(currentSet))
{
// Faces of set with OpenFOAM faceID as value
faceList setFaces(currentSet.size());
labelList faceValues(currentSet.size());
label setFaceI = 0;
forAllConstIter(topoSet, currentSet, iter)
{
setFaces[setFaceI] = mesh.faces()[iter.key()];
faceValues[setFaceI] = iter.key();
setFaceI++;
}
primitiveFacePatch fp(setFaces, mesh.points());
writePatch
(
true,
currentSet.name(),
fp,
"faceID",
faceValues,
mesh.time().path()/vtkName
);
}
// Check writing tolerance before doing any serious work
scalar getMergeDistance(const polyMesh& mesh, const scalar mergeTol)
{
const boundBox& meshBb = mesh.bounds();
scalar mergeDist = mergeTol * meshBb.mag();
scalar writeTol = std::pow
(
scalar(10.0),
-scalar(IOstream::defaultPrecision())
);
Info<< nl
<< "Overall mesh bounding box : " << meshBb << nl
<< "Relative tolerance : " << mergeTol << nl
<< "Absolute matching distance : " << mergeDist << nl
<< endl;
if (mesh.time().writeFormat() == IOstream::ASCII && mergeTol < writeTol)
{
FatalErrorIn("getMergeDistance(const polyMesh&, const scalar)")
<< "Your current settings specify ASCII writing with "
<< IOstream::defaultPrecision() << " digits precision." << endl
<< "Your merging tolerance (" << mergeTol << ") is finer than this."
<< endl
<< "Please change your writeFormat to binary"
<< " or increase the writePrecision" << endl
<< "or adjust the merge tolerance (-mergeTol)."
<< exit(FatalError);
}
return mergeDist;
}
label addPointZone(const polyMesh& mesh, const word& name)
{
label zoneID = mesh.pointZones().findZoneID(name);
if (zoneID != -1)
{
Info<< "Reusing existing pointZone "
<< mesh.pointZones()[zoneID].name()
<< " at index " << zoneID << endl;
}
else
{
pointZoneMesh& pointZones = const_cast<polyMesh&>(mesh).pointZones();
zoneID = pointZones.size();
Info<< "Adding pointZone " << name << " at index " << zoneID << endl;
pointZones.setSize(zoneID+1);
pointZones.set
(
zoneID,
new pointZone
(
name,
labelList(0),
zoneID,
pointZones
)
);
}
return zoneID;
}
bool MeshDistFromPatch::updateCell
(
const polyMesh& mesh,
const label thisCellI,
const label neighbourFaceI,
const MeshDistFromPatch& neighbourInfo,
const scalar tol
#ifdef FOAM_FACECELLWAVE_HAS_TRACKINGDATA
,TrackingData &td
#endif
)
{
const scalar d=mag(
mesh.cellCentres()[thisCellI]
-
mesh.faceCentres()[neighbourFaceI]
);
if(!valid(TRACKDATA)) {
dist_=d+neighbourInfo.dist();
return true;
} else {
const scalar nd=d+neighbourInfo.dist();
if(nd<dist_) {
dist_=nd;
return true;
} else {
return false;
}
}
}
label addFaceZone(const polyMesh& mesh, const word& name)
{
label zoneID = mesh.faceZones().findZoneID(name);
if (zoneID != -1)
{
Info<< "Reusing existing faceZone " << mesh.faceZones()[zoneID].name()
<< " at index " << zoneID << endl;
}
else
{
faceZoneMesh& faceZones = const_cast<polyMesh&>(mesh).faceZones();
zoneID = faceZones.size();
Info<< "Adding faceZone " << name << " at index " << zoneID << endl;
faceZones.setSize(zoneID+1);
faceZones.set
(
zoneID,
new faceZone
(
name,
labelList(0),
boolList(),
zoneID,
faceZones
)
);
}
return zoneID;
}
Foam::labelList Foam::CuthillMcKeeRenumber::renumber
(
const polyMesh& mesh,
const pointField& points
) const
{
CompactListList<label> cellCells;
decompositionMethod::calcCellCells
(
mesh,
identity(mesh.nCells()),
mesh.nCells(),
false, // local only
cellCells
);
labelList orderedToOld = bandCompression(cellCells());
if (reverse_)
{
reverse(orderedToOld);
}
return orderedToOld;
}
Foam::sampledPatchInternalField::sampledPatchInternalField
(
const word& name,
const polyMesh& mesh,
const dictionary& dict
)
:
sampledPatch(name, mesh, dict),
mappers_(patchIDs().size())
{
const scalar distance = readScalar(dict.lookup("distance"));
forAll(patchIDs(), i)
{
label patchI = patchIDs()[i];
mappers_.set
(
i,
new directMappedPatchBase
(
mesh.boundaryMesh()[patchI],
mesh.name(), // sampleRegion
directMappedPatchBase::NEARESTCELL, // sampleMode
word::null, // samplePatch
-distance // sample inside my domain
)
);
}
Foam::points0MotionSolver::points0MotionSolver
(
const polyMesh& mesh,
const IOdictionary& dict,
const word& type
)
:
motionSolver(mesh, dict, type),
points0_(pointIOField(points0IO(mesh)))
{
if (points0_.size() != mesh.nPoints())
{
FatalErrorInFunction
<< "Number of points in mesh " << mesh.nPoints()
<< " differs from number of points " << points0_.size()
<< " read from file "
<< typeFilePath<pointIOField>
(
IOobject
(
"points",
time().constant(),
polyMesh::meshSubDir,
mesh,
IOobject::MUST_READ,
IOobject::NO_WRITE,
false
)
)
<< exit(FatalError);
}
}
Foam::patchInjectionBase::patchInjectionBase
(
const polyMesh& mesh,
const word& patchName
)
:
patchName_(patchName),
patchId_(mesh.boundaryMesh().findPatchID(patchName_)),
patchArea_(0.0),
patchNormal_(),
cellOwners_(),
triFace_(),
triToFace_(),
triCumulativeMagSf_(),
sumTriMagSf_(Pstream::nProcs() + 1, 0.0)
{
if (patchId_ < 0)
{
FatalErrorInFunction
<< "Requested patch " << patchName_ << " not found" << nl
<< "Available patches are: " << mesh.boundaryMesh().names() << nl
<< exit(FatalError);
}
updateMesh(mesh);
}
// Construct from mesh. No morphing data: the mesh has not changed
// HJ, 27/Nov/2009
Foam::mapPolyMesh::mapPolyMesh(const polyMesh& mesh)
:
mesh_(mesh),
morphing_(false),
nOldPoints_(mesh.nPoints()),
nOldFaces_(mesh.nFaces()),
nOldCells_(mesh.nCells())
{}
Foam::sampledIsoSurface::sampledIsoSurface
(
const word& name,
const polyMesh& mesh,
const dictionary& dict
)
:
sampledSurface(name, mesh, dict),
isoField_(dict.lookup("isoField")),
isoVal_(readScalar(dict.lookup("isoValue"))),
mergeTol_(dict.lookupOrDefault("mergeTol", 1e-6)),
regularise_(dict.lookupOrDefault("regularise", true)),
average_(dict.lookupOrDefault("average", false)),
zoneID_(dict.lookupOrDefault("zone", word::null), mesh.cellZones()),
exposedPatchName_(word::null),
surfPtr_(NULL),
facesPtr_(NULL),
prevTimeIndex_(-1),
storedVolFieldPtr_(NULL),
volFieldPtr_(NULL),
storedPointFieldPtr_(NULL),
pointFieldPtr_(NULL)
{
if (!sampledSurface::interpolate())
{
FatalIOErrorIn
(
"sampledIsoSurface::sampledIsoSurface"
"(const word&, const polyMesh&, const dictionary&)",
dict
) << "Non-interpolated iso surface not supported since triangles"
<< " span across cells." << exit(FatalIOError);
}
if (zoneID_.index() != -1)
{
dict.lookup("exposedPatchName") >> exposedPatchName_;
if (mesh.boundaryMesh().findPatchID(exposedPatchName_) == -1)
{
FatalIOErrorIn
(
"sampledIsoSurface::sampledIsoSurface"
"(const word&, const polyMesh&, const dictionary&)",
dict
) << "Cannot find patch " << exposedPatchName_
<< " in which to put exposed faces." << endl
<< "Valid patches are " << mesh.boundaryMesh().names()
<< exit(FatalIOError);
}
if (debug && zoneID_.index() != -1)
{
Info<< "Restricting to cellZone " << zoneID_.name()
<< " with exposed internal faces into patch "
<< exposedPatchName_ << endl;
}
}
Foam::labelList Foam::refinementParameters::findCells(const polyMesh& mesh)
const
{
// Force calculation of tet-diag decomposition (for use in findCell)
(void)mesh.tetBasePtIs();
// Global calculation engine
globalIndex globalCells(mesh.nCells());
// Cell label per point
labelList cellLabels(keepPoints_.size());
forAll(keepPoints_, i)
{
const point& keepPoint = keepPoints_[i];
label localCellI = mesh.findCell(keepPoint);
label globalCellI = -1;
if (localCellI != -1)
{
globalCellI = globalCells.toGlobal(localCellI);
}
reduce(globalCellI, maxOp<label>());
if (globalCellI == -1)
{
FatalErrorInFunction
<< "Point " << keepPoint
<< " is not inside the mesh or on a face or edge." << nl
<< "Bounding box of the mesh:" << mesh.bounds()
<< exit(FatalError);
}
label procI = globalCells.whichProcID(globalCellI);
label procCellI = globalCells.toLocal(procI, globalCellI);
Info<< "Found point " << keepPoint << " in cell " << procCellI
<< " on processor " << procI << endl;
if (globalCells.isLocal(globalCellI))
{
cellLabels[i] = localCellI;
}
else
{
cellLabels[i] = -1;
}
}
return cellLabels;
}
bool Foam::meshStructure::isStructuredCell
(
const polyMesh& mesh,
const label layerI,
const label cellI
) const
{
const cell& cFaces = mesh.cells()[cellI];
// Count number of side faces
label nSide = 0;
forAll(cFaces, i)
{
if (faceToPatchEdgeAddressing_[cFaces[i]] != -1)
{
nSide++;
}
}
if (nSide != cFaces.size()-2)
{
return false;
}
// Check that side faces have correct point layers
forAll(cFaces, i)
{
if (faceToPatchEdgeAddressing_[cFaces[i]] != -1)
{
const face& f = mesh.faces()[cFaces[i]];
label nLayer = 0;
label nLayerPlus1 = 0;
forAll(f, fp)
{
label pointI = f[fp];
if (pointLayer_[pointI] == layerI)
{
nLayer++;
}
else if (pointLayer_[pointI] == layerI+1)
{
nLayerPlus1++;
}
}
if (f.size() != 4 || (nLayer+nLayerPlus1 != 4))
{
return false;
}
}
}
Foam::labelList Foam::ptscotchDecomp::decompose
(
const polyMesh& mesh,
const labelList& agglom,
const pointField& agglomPoints,
const scalarField& pointWeights
)
{
if (agglom.size() != mesh.nCells())
{
FatalErrorIn
(
"ptscotchDecomp::decompose(const labelList&, const pointField&)"
) << "Size of cell-to-coarse map " << agglom.size()
<< " differs from number of cells in mesh " << mesh.nCells()
<< exit(FatalError);
}
// // For running sequential ...
// if (Pstream::nProcs() <= 1)
// {
// return scotchDecomp(decompositionDict_, mesh)
// .decompose(agglom, agglomPoints, pointWeights);
// }
// Make Metis CSR (Compressed Storage Format) storage
// adjncy : contains neighbours (= edges in graph)
// xadj(celli) : start of information in adjncy for celli
CompactListList<label> cellCells;
calcCellCells(mesh, agglom, agglomPoints.size(), cellCells);
// Decompose using weights
List<int> finalDecomp;
decomposeZeroDomains
(
mesh.time().path()/mesh.name(),
cellCells.m(),
cellCells.offsets(),
pointWeights,
finalDecomp
);
// Rework back into decomposition for original mesh
labelList fineDistribution(agglom.size());
forAll(fineDistribution, i)
{
fineDistribution[i] = finalDecomp[agglom[i]];
}
return fineDistribution;
}
label findPatchID(const polyMesh& mesh, const word& name)
{
label patchI = mesh.boundaryMesh().findPatchID(name);
if (patchI == -1)
{
FatalErrorIn("findPatchID(const polyMesh&, const word&)")
<< "Cannot find patch " << name << endl
<< "Valid patches are " << mesh.boundaryMesh().names()
<< exit(FatalError);
}
return patchI;
}
void createDummyFvMeshFiles(const polyMesh& mesh, const word& regionName)
{
// Create dummy system/fv*
{
IOobject io
(
"fvSchemes",
mesh.time().system(),
regionName,
mesh,
IOobject::NO_READ,
IOobject::NO_WRITE,
false
);
Info<< "Testing:" << io.objectPath() << endl;
if (!io.headerOk())
{
Info<< "Writing dummy " << regionName/io.name() << endl;
dictionary dummyDict;
dictionary divDict;
dummyDict.add("divSchemes", divDict);
dictionary gradDict;
dummyDict.add("gradSchemes", gradDict);
dictionary laplDict;
dummyDict.add("laplacianSchemes", laplDict);
IOdictionary(io, dummyDict).regIOobject::write();
}
}
{
IOobject io
(
"fvSolution",
mesh.time().system(),
regionName,
mesh,
IOobject::NO_READ,
IOobject::NO_WRITE,
false
);
if (!io.headerOk())
{
Info<< "Writing dummy " << regionName/io.name() << endl;
dictionary dummyDict;
IOdictionary(io, dummyDict).regIOobject::write();
}
}
}
Foam::displacementMotionSolver::displacementMotionSolver
(
const polyMesh& mesh,
const IOdictionary& dict,
const word& type
)
:
motionSolver(mesh, dict, type),
pointDisplacement_
(
IOobject
(
"pointDisplacement",
time().timeName(),
mesh,
IOobject::MUST_READ,
IOobject::AUTO_WRITE
),
pointMesh::New(mesh)
),
points0_(pointIOField(points0IO(mesh)))
{
if (points0_.size() != mesh.nPoints())
{
FatalErrorIn
(
"displacementMotionSolver::"
"displacementMotionSolver\n"
"(\n"
" const polyMesh&,\n"
" const IOdictionary&,\n"
" const word&\n"
")"
) << "Number of points in mesh " << mesh.nPoints()
<< " differs from number of points " << points0_.size()
<< " read from file "
<<
IOobject
(
"points",
time().constant(),
polyMesh::meshSubDir,
mesh,
IOobject::MUST_READ,
IOobject::NO_WRITE,
false
).filePath()
<< exit(FatalError);
}
}
Foam::displacementFvMotionSolver::displacementFvMotionSolver
(
const polyMesh& mesh,
Istream&
)
:
fvMotionSolver(mesh),
points0_
(
pointIOField
(
IOobject
(
"points",
mesh.time().constant(),
polyMesh::meshSubDir,
mesh,
IOobject::MUST_READ,
IOobject::NO_WRITE,
false
)
)
)
{
if (points0_.size() != mesh.nPoints())
{
FatalErrorIn
(
"displacementFvMotionSolver::displacementFvMotionSolver\n"
"(\n"
" const polyMesh&,\n"
" Istream&\n"
")"
) << "Number of points in mesh " << mesh.nPoints()
<< " differs from number of points " << points0_.size()
<< " read from file "
<<
IOobject
(
"points",
mesh.time().constant(),
polyMesh::meshSubDir,
mesh,
IOobject::MUST_READ,
IOobject::NO_WRITE,
false
).filePath()
<< exit(FatalError);
}
}
// Construct from mesh reference
Foam::polyTopoChange::polyTopoChange(const polyMesh& mesh)
:
mesh_(mesh),
addedPoints_(minListSize),
modifiedPoints_(minListSize),
removedPoints_
(
Foam::max(mesh.allPoints().size()/pointFraction, minListSize)
),
addedFaces_(minListSize),
modifiedFaces_(minListSize),
removedFaces_(Foam::max(mesh.allFaces().size()/faceFraction, minListSize)),
addedCells_(minListSize),
removedCells_(Foam::max(mesh.nCells()/cellFraction, minListSize))
{}
Foam::labelList Foam::refinementParameters::findCells(const polyMesh& mesh)
const
{
// Global calculation engine
globalIndex globalCells(mesh.nCells());
// Cell label per point
labelList cellLabels(keepPoints_.size());
forAll(keepPoints_, i)
{
const point& keepPoint = keepPoints_[i];
label localCellI = mesh.findCell(keepPoint);
label globalCellI = -1;
if (localCellI != -1)
{
Pout<< "Found point " << keepPoint << " in cell " << localCellI
<< " on processor " << Pstream::myProcNo() << endl;
globalCellI = globalCells.toGlobal(localCellI);
}
reduce(globalCellI, maxOp<label>());
if (globalCellI == -1)
{
FatalErrorIn
(
"refinementParameters::findCells(const polyMesh&) const"
) << "Point " << keepPoint
<< " is not inside the mesh or on a face or edge." << nl
<< "Bounding box of the mesh:" << mesh.bounds()
<< exit(FatalError);
}
if (globalCells.isLocal(globalCellI))
{
cellLabels[i] = localCellI;
}
else
{
cellLabels[i] = -1;
}
}
return cellLabels;
}
// Adds empty patch if not yet there. Returns patchID.
label addPatch(polyMesh& mesh, const word& patchName)
{
label patchi = mesh.boundaryMesh().findPatchID(patchName);
if (patchi == -1)
{
const polyBoundaryMesh& patches = mesh.boundaryMesh();
List<polyPatch*> newPatches(patches.size() + 1);
patchi = 0;
// Copy all old patches
forAll(patches, i)
{
const polyPatch& pp = patches[i];
newPatches[patchi] =
pp.clone
(
patches,
patchi,
pp.size(),
pp.start()
).ptr();
patchi++;
}
// Add zero-sized patch
newPatches[patchi] =
new polyPatch
(
patchName,
0,
mesh.nFaces(),
patchi,
patches,
polyPatch::typeName
);
mesh.removeBoundary();
mesh.addPatches(newPatches);
Pout<< "Created patch " << patchName << " at " << patchi << endl;
}
else
{
Foam::extendedFaceToCellStencil::extendedFaceToCellStencil(const polyMesh& mesh)
:
mesh_(mesh)
{
// Check for transformation - not supported.
const polyBoundaryMesh& patches = mesh.boundaryMesh();
forAll(patches, patchI)
{
if (isA<coupledPolyPatch>(patches[patchI]))
{
const coupledPolyPatch& cpp =
refCast<const coupledPolyPatch>(patches[patchI]);
if (!cpp.parallel() || cpp.separated())
{
FatalErrorIn
(
"extendedFaceToCellStencil::extendedFaceToCellStencil"
"(const polyMesh&)"
) << "Coupled patches with transformations not supported."
<< endl
<< "Problematic patch " << cpp.name() << exit(FatalError);
}
}
}
}
Foam::velocityLaplacianFvMotionSolver::velocityLaplacianFvMotionSolver
(
const polyMesh& mesh,
const IOdictionary& dict
)
:
velocityMotionSolver(mesh, dict, typeName),
fvMotionSolverCore(mesh),
cellMotionU_
(
IOobject
(
"cellMotionU",
mesh.time().timeName(),
mesh,
IOobject::READ_IF_PRESENT,
IOobject::AUTO_WRITE
),
fvMesh_,
dimensionedVector
(
"cellMotionU",
pointMotionU_.dimensions(),
Zero
),
cellMotionBoundaryTypes<vector>(pointMotionU_.boundaryField())
),
diffusivityPtr_
(
motionDiffusivity::New(fvMesh_, coeffDict().lookup("diffusivity"))
)
{}
Foam::sampledTriSurfaceMesh::sampledTriSurfaceMesh
(
const word& name,
const polyMesh& mesh,
const dictionary& dict
)
:
sampledSurface(name, mesh, dict),
surface_
(
IOobject
(
dict.lookup("surface"),
mesh.time().constant(), // instance
"triSurface", // local
mesh, // registry
IOobject::MUST_READ,
IOobject::NO_WRITE,
false
)
),
needsUpdate_(true),
cellLabels_(0),
pointToFace_(0)
{}
void testPackedList(const polyMesh& mesh, Random& rndGen)
{
Info<< nl << "Testing PackedList synchronisation." << endl;
{
PackedList<3> bits(mesh.nEdges());
forAll(bits, i)
{
bits.set(i, rndGen.integer(0,3));
}
labelList edgeValues(mesh.nEdges());
forAll(bits, i)
{
edgeValues[i] = bits.get(i);
}
Foam::sampledPlane::sampledPlane
(
const word& name,
const polyMesh& mesh,
const dictionary& dict
)
:
sampledSurface(name, mesh, dict),
cuttingPlane(plane(dict)),
zoneKey_(keyType::null),
triangulate_(dict.lookupOrDefault("triangulate", true)),
needsUpdate_(true)
{
// Make plane relative to the coordinateSystem (Cartesian)
// allow lookup from global coordinate systems
if (dict.found("coordinateSystem"))
{
coordinateSystem cs(mesh, dict.subDict("coordinateSystem"));
point base = cs.globalPosition(planeDesc().refPoint());
vector norm = cs.globalVector(planeDesc().normal());
// Assign the plane description
static_cast<plane&>(*this) = plane(base, norm);
}
dict.readIfPresent("zone", zoneKey_);
if (debug && zoneKey_.size() && mesh.cellZones().findIndex(zoneKey_) < 0)
{
Info<< "cellZone " << zoneKey_
<< " not found - using entire mesh" << endl;
}
}
