void Foam::syncTools::swapBoundaryCellPositions
(
const polyMesh& mesh,
const UList<point>& cellData,
List<point>& neighbourCellData
)
{
if (cellData.size() != mesh.nCells())
{
FatalErrorInFunction
<< "Number of cell values " << cellData.size()
<< " is not equal to the number of cells in the mesh "
<< mesh.nCells() << abort(FatalError);
}
const polyBoundaryMesh& patches = mesh.boundaryMesh();
label nBnd = mesh.nFaces()-mesh.nInternalFaces();
neighbourCellData.setSize(nBnd);
forAll(patches, patchI)
{
const polyPatch& pp = patches[patchI];
const labelUList& faceCells = pp.faceCells();
forAll(faceCells, i)
{
label bFaceI = pp.start()+i-mesh.nInternalFaces();
neighbourCellData[bFaceI] = cellData[faceCells[i]];
}
}
void Foam::decompositionMethod::calcCellCells
(
const polyMesh& mesh,
const labelList& agglom,
const label nLocalCoarse,
const bool parallel,
CompactListList<label>& cellCells
)
{
const labelList& faceOwner = mesh.faceOwner();
const labelList& faceNeighbour = mesh.faceNeighbour();
const polyBoundaryMesh& patches = mesh.boundaryMesh();
// Create global cell numbers
// ~~~~~~~~~~~~~~~~~~~~~~~~~~
globalIndex globalAgglom
(
nLocalCoarse,
Pstream::msgType(),
Pstream::worldComm,
parallel
);
// Get agglomerate owner on other side of coupled faces
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
labelList globalNeighbour(mesh.nFaces()-mesh.nInternalFaces());
forAll(patches, patchI)
{
const polyPatch& pp = patches[patchI];
if (pp.coupled() && (parallel || !isA<processorPolyPatch>(pp)))
{
label faceI = pp.start();
label bFaceI = pp.start() - mesh.nInternalFaces();
forAll(pp, i)
{
globalNeighbour[bFaceI] = globalAgglom.toGlobal
(
agglom[faceOwner[faceI]]
);
bFaceI++;
faceI++;
}
}
void Foam::scotchDecomp::calcCSR
(
const polyMesh& mesh,
List<int>& adjncy,
List<int>& xadj
)
{
// Make Metis CSR (Compressed Storage Format) storage
// adjncy : contains neighbours (= edges in graph)
// xadj(celli) : start of information in adjncy for celli
xadj.setSize(mesh.nCells()+1);
// Initialise the number of internal faces of the cells to twice the
// number of internal faces
label nInternalFaces = 2*mesh.nInternalFaces();
// Check the boundary for coupled patches and add to the number of
// internal faces
const polyBoundaryMesh& pbm = mesh.boundaryMesh();
forAll(pbm, patchi)
{
if (isA<cyclicPolyPatch>(pbm[patchi]))
{
nInternalFaces += pbm[patchi].size();
}
}
// Create the adjncy array the size of the total number of internal and
// coupled faces
adjncy.setSize(nInternalFaces);
// Fill in xadj
// ~~~~~~~~~~~~
label freeAdj = 0;
for (label cellI = 0; cellI < mesh.nCells(); cellI++)
{
xadj[cellI] = freeAdj;
const labelList& cFaces = mesh.cells()[cellI];
forAll(cFaces, i)
{
label faceI = cFaces[i];
if
(
mesh.isInternalFace(faceI)
|| isA<cyclicPolyPatch>(pbm[pbm.whichPatch(faceI)])
)
{
freeAdj++;
}
}
}
// Determines face blocking
void Foam::channelIndex::walkOppositeFaces
(
const polyMesh& mesh,
const labelList& startFaces,
boolList& blockedFace
)
{
const cellList& cells = mesh.cells();
const faceList& faces = mesh.faces();
label nBnd = mesh.nFaces() - mesh.nInternalFaces();
DynamicList<label> frontFaces(startFaces);
forAll(frontFaces, i)
{
label facei = frontFaces[i];
blockedFace[facei] = true;
}
// Adds empty patch if not yet there. Returns patchID.
label addPatch(polyMesh& mesh, const word& patchName)
{
label patchi = mesh.boundaryMesh().findPatchID(patchName);
if (patchi == -1)
{
const polyBoundaryMesh& patches = mesh.boundaryMesh();
List<polyPatch*> newPatches(patches.size() + 1);
// Add empty patch as 0th entry (Note: only since subsetMesh wants this)
patchi = 0;
newPatches[patchi] =
new emptyPolyPatch
(
Foam::word(patchName),
0,
mesh.nInternalFaces(),
patchi,
patches,
emptyPolyPatch::typeName
);
forAll(patches, i)
{
const polyPatch& pp = patches[i];
newPatches[i+1] =
pp.clone
(
patches,
i+1,
pp.size(),
pp.start()
).ptr();
}
mesh.removeBoundary();
mesh.addPatches(newPatches);
Info<< "Created patch oldInternalFaces at " << patchi << endl;
}
else
{
// Naive feature detection. All boundary edges with angle > featureAngle become
// feature edges. All points on feature edges become feature points. All
// boundary faces become feature faces.
void simpleMarkFeatures
(
const polyMesh& mesh,
const PackedBoolList& isBoundaryEdge,
const scalar featureAngle,
const bool concaveMultiCells,
const bool doNotPreserveFaceZones,
labelList& featureFaces,
labelList& featureEdges,
labelList& singleCellFeaturePoints,
labelList& multiCellFeaturePoints
)
{
scalar minCos = Foam::cos(featureAngle * mathematicalConstant::pi/180.0);
const polyBoundaryMesh& patches = mesh.boundaryMesh();
// Working sets
labelHashSet featureEdgeSet;
labelHashSet singleCellFeaturePointSet;
labelHashSet multiCellFeaturePointSet;
// 1. Mark all edges between patches
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
forAll(patches, patchI)
{
const polyPatch& pp = patches[patchI];
const labelList& meshEdges = pp.meshEdges();
// All patch corner edges. These need to be feature points & edges!
for (label edgeI = pp.nInternalEdges(); edgeI < pp.nEdges(); edgeI++)
{
label meshEdgeI = meshEdges[edgeI];
featureEdgeSet.insert(meshEdgeI);
singleCellFeaturePointSet.insert(mesh.edges()[meshEdgeI][0]);
singleCellFeaturePointSet.insert(mesh.edges()[meshEdgeI][1]);
}
}
// 2. Mark all geometric feature edges
// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Make distinction between convex features where the boundary point becomes
// a single cell and concave features where the boundary point becomes
// multiple 'half' cells.
// Addressing for all outside faces
primitivePatch allBoundary
(
SubList<face>
(
mesh.faces(),
mesh.nFaces()-mesh.nInternalFaces(),
mesh.nInternalFaces()
),
mesh.points()
);
// Check for non-manifold points (surface pinched at point)
allBoundary.checkPointManifold(false, &singleCellFeaturePointSet);
// Check for non-manifold edges (surface pinched at edge)
const labelListList& edgeFaces = allBoundary.edgeFaces();
const labelList& meshPoints = allBoundary.meshPoints();
forAll(edgeFaces, edgeI)
{
const labelList& eFaces = edgeFaces[edgeI];
if (eFaces.size() > 2)
{
const edge& e = allBoundary.edges()[edgeI];
//Info<< "Detected non-manifold boundary edge:" << edgeI
// << " coords:"
// << allBoundary.points()[meshPoints[e[0]]]
// << allBoundary.points()[meshPoints[e[1]]] << endl;
singleCellFeaturePointSet.insert(meshPoints[e[0]]);
singleCellFeaturePointSet.insert(meshPoints[e[1]]);
}
}
// Check for features.
forAll(edgeFaces, edgeI)
{
const labelList& eFaces = edgeFaces[edgeI];
if (eFaces.size() == 2)
{
label f0 = eFaces[0];
label f1 = eFaces[1];
// check angle
const vector& n0 = allBoundary.faceNormals()[f0];
const vector& n1 = allBoundary.faceNormals()[f1];
if ((n0 & n1) < minCos)
{
const edge& e = allBoundary.edges()[edgeI];
label v0 = meshPoints[e[0]];
label v1 = meshPoints[e[1]];
label meshEdgeI = meshTools::findEdge(mesh, v0, v1);
featureEdgeSet.insert(meshEdgeI);
// Check if convex or concave by looking at angle
// between face centres and normal
vector c1c0
(
allBoundary[f1].centre(allBoundary.points())
- allBoundary[f0].centre(allBoundary.points())
);
if (concaveMultiCells && (c1c0 & n0) > SMALL)
{
// Found concave edge. Make into multiCell features
Info<< "Detected concave feature edge:" << edgeI
<< " cos:" << (c1c0 & n0)
<< " coords:"
<< allBoundary.points()[v0]
<< allBoundary.points()[v1]
<< endl;
singleCellFeaturePointSet.erase(v0);
multiCellFeaturePointSet.insert(v0);
singleCellFeaturePointSet.erase(v1);
multiCellFeaturePointSet.insert(v1);
}
else
{
// Convex. singleCell feature.
if (!multiCellFeaturePointSet.found(v0))
{
singleCellFeaturePointSet.insert(v0);
}
if (!multiCellFeaturePointSet.found(v1))
{
singleCellFeaturePointSet.insert(v1);
}
}
}
}
}
// 3. Mark all feature faces
// ~~~~~~~~~~~~~~~~~~~~~~~~~
// Face centres that need inclusion in the dual mesh
labelHashSet featureFaceSet(mesh.nFaces()-mesh.nInternalFaces());
// A. boundary faces.
for (label faceI = mesh.nInternalFaces(); faceI < mesh.nFaces(); faceI++)
{
featureFaceSet.insert(faceI);
}
// B. face zones.
const faceZoneMesh& faceZones = mesh.faceZones();
if (doNotPreserveFaceZones)
{
if (faceZones.size() > 0)
{
WarningIn("simpleMarkFeatures(..)")
<< "Detected " << faceZones.size()
<< " faceZones. These will not be preserved."
<< endl;
}
}
else
{
if (faceZones.size() > 0)
{
Info<< "Detected " << faceZones.size()
<< " faceZones. Preserving these by marking their"
<< " points, edges and faces as features." << endl;
}
forAll(faceZones, zoneI)
{
const faceZone& fz = faceZones[zoneI];
Info<< "Inserting all faces in faceZone " << fz.name()
<< " as features." << endl;
forAll(fz, i)
{
label faceI = fz[i];
const face& f = mesh.faces()[faceI];
const labelList& fEdges = mesh.faceEdges()[faceI];
featureFaceSet.insert(faceI);
forAll(f, fp)
{
// Mark point as multi cell point (since both sides of
// face should have different cells)
singleCellFeaturePointSet.erase(f[fp]);
multiCellFeaturePointSet.insert(f[fp]);
// Make sure there are points on the edges.
featureEdgeSet.insert(fEdges[fp]);
}
}
}
// Check the blockMesh topology
void Foam::blockMesh::checkBlockMesh(const polyMesh& bm) const
{
if (verboseOutput)
{
Info<< nl << "Check topology" << endl;
}
bool ok = true;
const pointField& points = bm.points();
const faceList& faces = bm.faces();
const cellList& cells = bm.cells();
const polyPatchList& patches = bm.boundaryMesh();
label nBoundaryFaces = 0;
forAll(cells, celli)
{
nBoundaryFaces += cells[celli].nFaces();
}
nBoundaryFaces -= 2*bm.nInternalFaces();
label nDefinedBoundaryFaces = 0;
forAll(patches, patchi)
{
nDefinedBoundaryFaces += patches[patchi].size();
}
if (verboseOutput)
{
Info<< nl << tab << "Basic statistics" << nl
<< tab << tab << "Number of internal faces : "
<< bm.nInternalFaces() << nl
<< tab << tab << "Number of boundary faces : "
<< nBoundaryFaces << nl
<< tab << tab << "Number of defined boundary faces : "
<< nDefinedBoundaryFaces << nl
<< tab << tab << "Number of undefined boundary faces : "
<< nBoundaryFaces - nDefinedBoundaryFaces << nl;
if ((nBoundaryFaces - nDefinedBoundaryFaces) > 0)
{
Info<< tab << tab << tab
<< "(Warning : only leave undefined the front and back planes "
<< "of 2D planar geometries!)" << endl;
}
Info<< tab << "Checking patch -> block consistency" << endl;
}
forAll(patches, patchi)
{
const faceList& Patch = patches[patchi];
forAll(Patch, patchFacei)
{
const face& patchFace = Patch[patchFacei];
bool patchFaceOK = false;
forAll(cells, celli)
{
const labelList& cellFaces = cells[celli];
forAll(cellFaces, cellFacei)
{
if (patchFace == faces[cellFaces[cellFacei]])
{
patchFaceOK = true;
if
(
(
patchFace.normal(points)
& faces[cellFaces[cellFacei]].normal(points)
) < 0.0
)
{
Info<< tab << tab
<< "Face " << patchFacei
<< " of patch " << patchi
<< " (" << patches[patchi].name() << ")"
<< " points inwards"
<< endl;
ok = false;
}
}
}
}
if (!patchFaceOK)
{
Info<< tab << tab
<< "Face " << patchFacei
<< " of patch " << patchi
<< " (" << patches[patchi].name() << ")"
<< " does not match any block faces" << endl;
ok = false;
}
}
}
if (verboseOutput)
{
Info<< endl;
}
if (!ok)
{
FatalErrorIn("blockMesh::checkBlockMesh(const polyMesh& bm)")
<< "Block mesh topology incorrect, stopping mesh generation!"
<< exit(FatalError);
}
}
void insertDuplicateMerge
(
const polyMesh& mesh,
const labelList& duplicates,
polyTopoChange& meshMod
)
{
const faceList& faces = mesh.faces();
const labelList& faceOwner = mesh.faceOwner();
const faceZoneMesh& faceZones = mesh.faceZones();
forAll(duplicates, bFacei)
{
label otherFacei = duplicates[bFacei];
if (otherFacei != -1 && otherFacei > bFacei)
{
// Two duplicate faces. Merge.
label face0 = mesh.nInternalFaces() + bFacei;
label face1 = mesh.nInternalFaces() + otherFacei;
label own0 = faceOwner[face0];
label own1 = faceOwner[face1];
if (own0 < own1)
{
// Use face0 as the new internal face.
label zoneID = faceZones.whichZone(face0);
bool zoneFlip = false;
if (zoneID >= 0)
{
const faceZone& fZone = faceZones[zoneID];
zoneFlip = fZone.flipMap()[fZone.whichFace(face0)];
}
meshMod.setAction(polyRemoveFace(face1));
meshMod.setAction
(
polyModifyFace
(
faces[face0], // modified face
face0, // label of face being modified
own0, // owner
own1, // neighbour
false, // face flip
-1, // patch for face
false, // remove from zone
zoneID, // zone for face
zoneFlip // face flip in zone
)
);
}
else
{
// Use face1 as the new internal face.
label zoneID = faceZones.whichZone(face1);
bool zoneFlip = false;
if (zoneID >= 0)
{
const faceZone& fZone = faceZones[zoneID];
zoneFlip = fZone.flipMap()[fZone.whichFace(face1)];
}
meshMod.setAction(polyRemoveFace(face0));
meshMod.setAction
(
polyModifyFace
(
faces[face1], // modified face
face1, // label of face being modified
own1, // owner
own0, // neighbour
false, // face flip
-1, // patch for face
false, // remove from zone
zoneID, // zone for face
zoneFlip // face flip in zone
)
);
}
}
}
