void CameraComponent::loadGUI(const ci::params::InterfaceGlRef &gui)
{
gui->addSeparator();
gui->addText( mContext->getName() +" : "+ getName());
auto updateFn = std::bind(&CameraComponent::updateCameraParams, this);
gui->addParam( mContext->getName() +" : FOV", &mFov).updateFn(updateFn);
gui->addParam( mContext->getName() +" : Far", &mFar).updateFn(updateFn);
gui->addParam( mContext->getName() +" : Near", &mNear).updateFn(updateFn);
gui->addParam( mContext->getName() +" : Interest Point", &mInterestPoint);
}
void OSCComponent::loadGUI(const ci::params::InterfaceGlRef &gui)
{
gui->addSeparator();
gui->addText( mContext->getName() +" : "+ getName());
auto updateFn = [&]{ mListener.setup(mListenPort); };
gui->addParam("listen port", &mListenPort).updateFn(updateFn);
///TODO:: change osc sender gui update
// auto loadFn = [&]{
// auto tree = ec::ConfigManager::get()->retreiveComponent(ec::Controller::get()->scene().lock()->getName(), mContext->getName(), getName() );
// auto ip = tree["send_ip"].getValue();
// auto port = tree["send_port"].getValue<int>();
// mSendPort = port;
// mSendIp = ip;
// mSender.setup(mSendIp, mSendPort);
// };
// gui->addButton("reload osc sender", loadFn );
}
void SegmentationApp::initInterface()
{
interface->clear();
if (guiMode == GUI_MODE::LOAD_IMAGE) {
interface->addButton( "Open Image", std::bind( &SegmentationApp::openImage, this ) );
}
else if (guiMode == GUI_MODE::LOAD_GROUNDTRUTH) {
interface->addButton( "Open Ground Truth", std::bind( &SegmentationApp::openGroundTruth, this ) );
//interface->addButton( "Open Doctor Image", std::bind( &SegmentationApp::openDoctorImage, this ) );
interface->addSeparator();
interface->addParam("filter radius", &filterRadius).min(0).max(10).step(1);
interface->addButton( "Mean Filter", std::bind( &SegmentationApp::meanFilter, this ) );
interface->addButton( "Median Filter", std::bind( &SegmentationApp::medianFilter, this ) );
interface->addButton( "Min Filter", std::bind( &SegmentationApp::minFilter, this ) );
interface->addButton( "Max Filter", std::bind( &SegmentationApp::maxFilter, this ) );
interface->addSeparator();
interface->addButton( "Get Hue", std::bind( &SegmentationApp::getHue, this ) );
interface->addSeparator();
interface->addParam("hue threshold", &hueThreshold).min(0).max(PI).step(.005).updateFn([this] () {
thresholdHue(); });;
interface->addParam("angle", &hueAngle).min(-PI).max(PI).step(.005).updateFn([this] () {
thresholdHue(); });;
interface->addButton( "threshold hue", std::bind( &SegmentationApp::thresholdHue, this ) );
interface->addSeparator();
interface->addParam("green weight", &greenWeight).min(0).max(5).step(.01).updateFn([this] () {
experimentalColorDistance(); });;
interface->addParam("blue weight", &blueWeight).min(0).max(5).step(.01).updateFn([this] () {
experimentalColorDistance(); });;
interface->addButton( "experimental threshold", std::bind( &SegmentationApp::experimentalColorDistance, this ) );
interface->addSeparator();
interface->addParam("otsus Iterations", &otsusIterations).min(1).max(5).step(1);
interface->addButton( "otsus red", std::bind( &SegmentationApp::redOtsusThreshold, this ) );
interface->addButton( "otsus green", std::bind( &SegmentationApp::greenOtsusThreshold, this ) );
interface->addButton( "otsus blue", std::bind( &SegmentationApp::blueOtsusThreshold, this ) );
interface->addButton( "otsus gray", std::bind( &SegmentationApp::grayOtsusThreshold, this ) );
interface->addButton( "otsus best", std::bind( &SegmentationApp::multiImageOtsusThreshold, this ) );
//interface->addButton( "otsus binary mask", std::bind( &SegmentationApp::otsusBinaryMask, this ) );
//interface->addButton( "otsus color union", std::bind( &SegmentationApp::otsusColorUnion, this ) );
interface->addSeparator();
interface->addButton( "erode", std::bind( &SegmentationApp::erode, this ) );
interface->addButton( "dilate", std::bind( &SegmentationApp::dilate, this ) );
interface->addSeparator();
interface->addButton( "get largest component", std::bind( &SegmentationApp::getLargestComponents, this ) );
interface->addButton( "fill holes", std::bind( &SegmentationApp::fillHoles, this ) );
interface->addSeparator();
interface->addButton( "show result", std::bind( &SegmentationApp::showResult, this ) );
//interface->addButton( "otsus edge intersection", std::bind( &SegmentationApp::otsusEdgeIntersection, this ) );
//interface->addSeparator();
//interface->addButton( "color gradient", std::bind( &SegmentationApp::getColorGradient, this ) );
//interface->addButton( "thin edges", std::bind( &SegmentationApp::edgeThinColorGradient, this ) );
interface->addSeparator();
interface->addButton( "autoSegment", std::bind( &SegmentationApp::autoSegment, this ) );
interface->addText( "Dice Coeddicient : " + std::to_string(diceCoefficientResult) );
interface->addSeparator();
interface->addButton( "Reset", std::bind( &SegmentationApp::reset, this ) );
interface->addSeparator();
interface->addButton( "Save Input", std::bind( &SegmentationApp::saveInputImage, this ) );
interface->addButton( "Save Segmentation", std::bind( &SegmentationApp::saveSegmentedImage, this ) );
interface->addButton( "Save Result", std::bind( &SegmentationApp::saveResultImage, this ) );
}
else if (guiMode == GUI_MODE::DO_TRAINING) {
interface->addParam("filter radius", &filterRadius).min(0).max(10).step(1);
interface->addButton( "Mean Filter", std::bind( &SegmentationApp::meanFilter, this ) );
interface->addButton( "Median Filter", std::bind( &SegmentationApp::medianFilter, this ) );
interface->addButton( "Min Filter", std::bind( &SegmentationApp::minFilter, this ) );
interface->addButton( "Max Filter", std::bind( &SegmentationApp::maxFilter, this ) );
interface->addSeparator();
interface->addButton( "Open Doctor Image", std::bind( &SegmentationApp::openDoctorImage, this ) );
interface->addSeparator();
interface->addButton( "Train", std::bind( &SegmentationApp::trainImage, this ) );
}
else if (guiMode == GUI_MODE::DO_DOCTOR_TRAINING) {
interface->addParam("filter radius", &filterRadius).min(0).max(10).step(1);
interface->addButton( "Mean Filter", std::bind( &SegmentationApp::meanFilter, this ) );
interface->addButton( "Median Filter", std::bind( &SegmentationApp::medianFilter, this ) );
interface->addSeparator();
interface->addButton( "Doctor Training", std::bind( &SegmentationApp::trainDoctorImage, this ) );
}
else if (guiMode == GUI_MODE::THRESHOLD) {
interface->addButton( "Show Mean Distance", std::bind( &SegmentationApp::getColorDistance, this ) );
interface->addButton( "Threshold Color", std::bind( &SegmentationApp::thresholdColor, this ) );
interface->addParam("color distance", &colorThreshold).min(0.f).max(255.f).step(1).updateFn([this] () {
thresholdColor(); });
interface->addSeparator();
interface->addButton( "Threshold Mahalonobis", std::bind( &SegmentationApp::thresholdMahalonobis, this ) );
interface->addParam("mahalonobis distance", &mahalonobisThreshold).min(0.f).max(255.f).step(1);
}
interface->addSeparator();
}
void ComponentTemplate::loadGUI(const ci::params::InterfaceGlRef &gui)
{
gui->addSeparator();
gui->addText(getName());
}
void GpGpuApp::setup()
{
// Load shaders
try {
mGlslProgDraw = gl::GlslProg::create( loadResource( RES_GLSL_DRAW_VERT ), loadResource( RES_GLSL_DRAW_FRAG ) );
} catch ( gl::GlslProgCompileExc ex ) {
console() << ex.what() << "\n";
quit();
}
try {
mGlslProgGpGpu0 = gl::GlslProg::create( loadResource( RES_GLSL_GPGPU_VERT ), loadResource( RES_GLSL_GPGPU0_FRAG ) );
} catch ( gl::GlslProgCompileExc ex ) {
console() << ex.what() << "\n";
quit();
}
try {
mGlslProgGpGpu1 = gl::GlslProg::create( loadResource( RES_GLSL_GPGPU_VERT ), loadResource( RES_GLSL_GPGPU1_FRAG ) );
} catch ( gl::GlslProgCompileExc ex ) {
console() << ex.what() << "\n";
quit();
}
// Define all properties
mArcball = Arcball( getWindowSize() );
mBrushSize = 0.1f;
mCamera = CameraPersp( getWindowWidth(), getWindowHeight(), 60.0f, 1.0f, 100000.0f );
mEyePoint = Vec3f( 0.0f, 20.0f, 256.0f );
mFullScreen = isFullScreen();
mFullScreenPrev = mFullScreen;
mLightAmbient = ColorAf::gray( 0.1f );
mLightAttenuationConstant = 0.1f;
mLightAttenuationLinear = 0.01f;
mLightAttenuationQuadratic = 0.001f;
mLightDiffuse = ColorAf( 0.9f, 0.3f, 0.667f );
mLightPosition = Vec3f( 11.38f, -1.39f, 59.74f );
mLightSpecular = ColorAf::white();
mLightShine = 1.0f;
mMaterialAmbient = 1.0f;
mMaterialDiffuse = 1.0f;
mMaterialEmissive = 0.0f;
mMaterialSpecular = 1.0f;
mMesh = gl::VboMesh::create( MeshHelper::createCube() );
mMouseDown = false;
mMouse = Vec2f::zero();
mMouseVelocity = Vec2f::zero();
mParams = params::InterfaceGl::create( "Params", Vec2i( 250, 400 ) );
mSize = Vec2i( 512, 512 );
mSizePrev = Vec2i::zero();
mTextureBrush = gl::Texture::create( loadImage( loadResource( RES_PNG_BRUSH ) ) );
// Set up arcball
mArcball.setRadius( (float)getWindowHeight() * 0.5f );
// Set up parameters
mParams->addParam( "Frame rate", &mFrameRate, "", true );
mParams->addParam( "Full screen", &mFullScreen, "key=f" );
mParams->addButton( "Quit", bind( &GpGpuApp::quit, this ), "key=q" );
mParams->addSeparator( "" );
mParams->addParam( "Brush size", &mBrushSize, "min=0.0 max=1.0 step=0.001" );
mParams->addParam( "Size X", &mSize.x, "min=1 max=1024 step=1" );
mParams->addParam( "Size Y", &mSize.y, "min=1 max=1024 step=1" );
mParams->addSeparator( "" );
mParams->addParam( "Light ambient", &mLightAmbient );
mParams->addParam( "Light att const", &mLightAttenuationConstant, "min=0.0 max=1.0 step=0.001" );
mParams->addParam( "Light att line", &mLightAttenuationLinear, "min=0.0 max=1.0 step=0.0001" );
mParams->addParam( "Light att quad", &mLightAttenuationQuadratic, "min=0.0 max=1.0 step=0.00001" );
mParams->addParam( "Light diffuse", &mLightDiffuse );
mParams->addParam( "Light position", &mLightPosition );
mParams->addParam( "Light specular", &mLightSpecular );
mParams->addParam( "Light shine", &mLightShine, "min=0.0 max=100000.0 step=1.0" );
mParams->addSeparator( "" );
mParams->addParam( "Material ambient", &mMaterialAmbient, "min=0.0 max=1.0 step=0.001" );
mParams->addParam( "Material diffuse", &mMaterialDiffuse, "min=0.0 max=1.0 step=0.001" );
mParams->addParam( "Material emissive", &mMaterialEmissive, "min=0.0 max=1.0 step=0.001" );
mParams->addParam( "Material specular", &mMaterialSpecular, "min=0.0 max=1.0 step=0.001" );
}