bool CartesianTrajectoryAction::checkTolerance(Eigen::Affine3d err, cartesian_trajectory_msgs::CartesianTolerance tol) {
if ((tol.position.x > 0.0) && (fabs(err.translation().x()) > tol.position.x)) {
return false;
}
if ((tol.position.y > 0.0) && (fabs(err.translation().y()) > tol.position.y)) {
return false;
}
if ((tol.position.z > 0.0) && (fabs(err.translation().z()) > tol.position.z)) {
return false;
}
Eigen::AngleAxisd ax(err.rotation());
Eigen::Vector3d rot = ax.axis() * ax.angle();
if ((tol.rotation.x > 0.0) && (fabs(rot(0)) > tol.rotation.x)) {
return false;
}
if ((tol.rotation.y > 0.0) && (fabs(rot(1)) > tol.rotation.y)) {
return false;
}
if ((tol.rotation.z > 0.0) && (fabs(rot(2)) > tol.rotation.z)) {
return false;
}
return true;
}
void UpperBodyPlanner::addPose_moveTo(const Eigen::Affine3d& start_pose, const Eigen::Affine3d& end_pose, const int& step_num, std::vector<geometry_msgs::Pose>& pose_sequence) {
Eigen::Quaterniond start_q = Rmat2Quaternion(start_pose.rotation());
Eigen::Quaterniond end_q = Rmat2Quaternion(end_pose.rotation());
Eigen::Quaterniond step_q;
std::cout << "**********************************" << std::endl;
std::cout << "start_pose translation is: " << start_pose.translation().transpose() << std::endl;
std::cout << "start_pose rotation is: " << std::endl;
std::cout << start_pose.rotation() << std::endl;
std::cout << "start_pose quaternion is: "<< std::endl;
std::cout << "w = " << start_q.w() << ", x = " << start_q.x() << ", y = " << start_q.y() << ", z = " << start_q.z() << std::endl;
std::cout << "end_pose translation is: " << end_pose.translation().transpose() << std::endl;
std::cout << "end_pose rotation is: " << std::endl;
std::cout << end_pose.rotation() << std::endl;
std::cout << "Desired quaternion is: " << std::endl;
std::cout << "w = " << end_q.w() << ", x = " << end_q.x() << ", y = " << end_q.y() << ", z = " << end_q.z() << std::endl;
std::cout << "**********************************" << std::endl;
Eigen::Vector3d step_translation_movement = (end_pose.translation() - start_pose.translation()) / step_num;
for (int i = 0; i < step_num; i++) {
Eigen::Affine3d step_target;
step_target.translation() = start_pose.translation() + (i + 1) * step_translation_movement;
step_q = start_q.slerp((i + 1.0) / step_num, end_q);
geometry_msgs::Pose target_pose = Eigen2msgPose(step_target.translation(), step_q);
pose_sequence.push_back(target_pose);
}
}
geometry_msgs::Pose PoseAffineToGeomMsg(const Eigen::Affine3d &e) {
geometry_msgs::Pose m;
m.position.x = e.translation().x();
m.position.y = e.translation().y();
m.position.z = e.translation().z();
// This is a column major vs row major matrice faux pas!
#if 0
MatrixEXd em = e.rotation();
Eigen::Quaterniond q = EMatrix2Quaterion(em);
#endif
Eigen::Quaterniond q(e.rotation());
m.orientation.x = q.x();
m.orientation.y = q.y();
m.orientation.z = q.z();
m.orientation.w = q.w();
#if 0
if (m.orientation.w < 0) {
m.orientation.x *= -1;
m.orientation.y *= -1;
m.orientation.z *= -1;
m.orientation.w *= -1;
}
#endif
}
bool SensorProcessorBase::updateTransformations(const std::string& sensorFrameId,
const ros::Time& timeStamp)
{
try {
transformListener_.waitForTransform(sensorFrameId, mapFrameId_, timeStamp, ros::Duration(1.0));
tf::StampedTransform transformTf;
transformListener_.lookupTransform(mapFrameId_, sensorFrameId, timeStamp, transformTf);
poseTFToEigen(transformTf, transformationSensorToMap_);
transformListener_.lookupTransform(robotBaseFrameId_, sensorFrameId, timeStamp, transformTf); // TODO Why wrong direction?
Eigen::Affine3d transform;
poseTFToEigen(transformTf, transform);
rotationBaseToSensor_.setMatrix(transform.rotation().matrix());
translationBaseToSensorInBaseFrame_.toImplementation() = transform.translation();
transformListener_.lookupTransform(mapFrameId_, robotBaseFrameId_, timeStamp, transformTf); // TODO Why wrong direction?
poseTFToEigen(transformTf, transform);
rotationMapToBase_.setMatrix(transform.rotation().matrix());
translationMapToBaseInMapFrame_.toImplementation() = transform.translation();
return true;
} catch (tf::TransformException &ex) {
ROS_ERROR("%s", ex.what());
return false;
}
}
void MotionPlanningFrame::updateCollisionObjectPose(bool update_marker_position)
{
QList<QListWidgetItem *> sel = ui_->collision_objects_list->selectedItems();
if (sel.empty())
return;
planning_scene_monitor::LockedPlanningSceneRW ps = planning_display_->getPlanningSceneRW();
if (ps)
{
collision_detection::CollisionWorld::ObjectConstPtr obj = ps->getWorld()->getObject(sel[0]->text().toStdString());
if (obj && obj->shapes_.size() == 1)
{
Eigen::Affine3d p;
p.translation()[0] = ui_->object_x->value();
p.translation()[1] = ui_->object_y->value();
p.translation()[2] = ui_->object_z->value();
p = Eigen::Translation3d(p.translation()) *
(Eigen::AngleAxisd(ui_->object_rx->value(), Eigen::Vector3d::UnitX()) *
Eigen::AngleAxisd(ui_->object_ry->value(), Eigen::Vector3d::UnitY()) *
Eigen::AngleAxisd(ui_->object_rz->value(), Eigen::Vector3d::UnitZ()));
ps->getWorldNonConst()->moveShapeInObject(obj->id_, obj->shapes_[0], p);
planning_display_->queueRenderSceneGeometry();
// Update the interactive marker pose to match the manually introduced one
if (update_marker_position && scene_marker_)
{
Eigen::Quaterniond eq(p.rotation());
scene_marker_->setPose(Ogre::Vector3(ui_->object_x->value(), ui_->object_y->value(), ui_->object_z->value()),
Ogre::Quaternion(eq.w(), eq.x(), eq.y(), eq.z()), "");
}
}
}
}
/*!
* \brief affine3d2UrdfPose converts an Eigen affine 4x4 matrix o represent the pose into a urdf pose
* vparam pose eigen Affine3d pose
* \return urdf pose with position and rotation.
*/
RCS::Pose Affine3d2UrdfPose(const Eigen::Affine3d &pose) {
RCS::Pose p;
p.getOrigin().setX(pose.translation().x());
p.getOrigin().setY(pose.translation().y());
p.getOrigin().setZ(pose.translation().z());
Eigen::Quaterniond q (pose.rotation());
tf::Quaternion qtf(q.x(),q.y(),q.z(),q.w());
//std::cout << "Affine3d2UrdfPose Quaterion = \n" << q.x() << ":" << q.y() << ":" << q.z() << ":" << q.w() << std::endl;
p.setRotation(qtf);
//std::cout << "After Affine3d2UrdfPose Quaterion = \n" << p.getRotation().x() << ":" << p.getRotation().y() << ":" << p.getRotation().z() << ":" << p.getRotation().w() << std::endl;
#if 0
MatrixEXd m = pose.rotation();
Eigen::Quaterniond q = EMatrix2Quaterion(m);
Eigen::Quaterniond q(pose.rotation());
p.getRotation().setX(q.x());
p.getRotation().setY(q.y());
p.getRotation().setZ(q.z());
p.getRotation().setW(q.w());
#endif
return p;
}
bool kinematic_constraints::VisibilityConstraint::equal(const KinematicConstraint &other, double margin) const
{
if (other.getType() != type_)
return false;
const VisibilityConstraint &o = static_cast<const VisibilityConstraint&>(other);
if (target_frame_id_ == o.target_frame_id_ && sensor_frame_id_ == o.sensor_frame_id_ &&
cone_sides_ == o.cone_sides_ && sensor_view_direction_ == o.sensor_view_direction_)
{
if (fabs(max_view_angle_ - o.max_view_angle_) > margin ||
fabs(target_radius_ - o.target_radius_) > margin)
return false;
Eigen::Affine3d diff = sensor_pose_.inverse() * o.sensor_pose_;
if (diff.translation().norm() > margin)
return false;
if (!diff.rotation().isIdentity(margin))
return false;
diff = target_pose_.inverse() * o.target_pose_;
if (diff.translation().norm() > margin)
return false;
if (!diff.rotation().isIdentity(margin))
return false;
return true;
}
return false;
}
/* checks if a given scene is in static equilibrium or not */
bool SceneValidator::isValidScene(std::vector<string> modelnames, std::vector<Eigen::Affine3d> model_poses){
//set all the Objects's positions
num = modelnames.size();
for (int i =0; i < num; i++){
auto mappedObject= m.find(modelnames[i]); //get model from hashmap
Eigen::Affine3d a = model_poses[i];
const dMatrix3 R = { //convert affine info to a 3x3 rotation matrix and a x,y,z position array
a(0,0), a(0,1), a(0,2),
a(1,0), a(1,1), a(1,2),
a(2,0), a(2,1), a(2,2) };
const dReal center[3] = {a.translation()[0],a.translation()[1], a.translation()[2]};
translateObject(mappedObject->second, center, R); //get the model name's MyObject info and feed it the position and rotation
}
//complete series of checks to see if scene is still stable or not
if (!isStableStill(modelnames, STEP1)){ //check #1
return false;
} else
if (!isStableStill(modelnames, STEP2)){ //check #2
return false;
} else
if (!isStableStill(modelnames, STEP3)){ //check #3
return false;
} else
if (!isStableStill(modelnames, STEP4)){ //check #4
return false;
}
else{
return true;
}
}
void UpperBodyPlanner::pose_moveTo2(const std::string &link_name,
const Eigen::Affine3d& current_pose,
const Eigen::Affine3d& desired_pose, const int &step_num,
std::vector<geometry_msgs::Pose> &pose_sequence) {
//Eigen::Affine3d current_pose = kinematic_state->getGlobalLinkTransform(link_name);
Eigen::Quaterniond current_q = Rmat2Quaternion(current_pose.rotation());
Eigen::Quaterniond desired_q = Rmat2Quaternion(desired_pose.rotation());
Eigen::Quaterniond step_q;
std::cout << "**********************************" << std::endl;
std::cout << "end_effector_name is: " << link_name << std::endl;
std::cout << "Current translation is: " << current_pose.translation().transpose() << std::endl;
std::cout << "current rotation is: " << std::endl;
std::cout << current_pose.rotation() << std::endl;
std::cout << "current quaternion is: "<< std::endl;
std::cout << "w = " << current_q.w() << ", x = " << current_q.x() << ", y = " << current_q.y() << ", z = " << current_q.z() << std::endl;
std::cout << "Desired translation is: " << desired_pose.translation().transpose() << std::endl;
std::cout << "Desired rotation is: " << std::endl;
std::cout << desired_pose.rotation() << std::endl;
std::cout << "Desired quaternion is: " << std::endl;
std::cout << "w = " << desired_q.w() << ", x = " << desired_q.x() << ", y = " << desired_q.y() << ", z = " << desired_q.z() << std::endl;
std::cout << "**********************************" << std::endl;
Eigen::Vector3d step_translation_movement = (desired_pose.translation() - current_pose.translation()) / step_num;
for (int i = 0; i < step_num; i++) {
Eigen::Affine3d step_target;
step_target.translation() = current_pose.translation() + (i + 1) * step_translation_movement;
step_q = current_q.slerp((i + 1.0) / step_num, desired_q);
geometry_msgs::Pose target_pose = Eigen2msgPose(step_target.translation(), step_q);
pose_sequence.push_back(target_pose);
}
}
// The input 3D points are stored as columns.
Eigen::Affine3d Find3DAffineTransform(Eigen::Matrix3Xd in, Eigen::Matrix3Xd out) {
// Default output
Eigen::Affine3d A;
A.linear() = Eigen::Matrix3d::Identity(3, 3);
A.translation() = Eigen::Vector3d::Zero();
if (in.cols() != out.cols())
throw "Find3DAffineTransform(): input data mis-match";
// First find the scale, by finding the ratio of sums of some distances,
// then bring the datasets to the same scale.
double dist_in = 0, dist_out = 0;
for (int col = 0; col < in.cols()-1; col++) {
dist_in += (in.col(col+1) - in.col(col)).norm();
dist_out += (out.col(col+1) - out.col(col)).norm();
}
if (dist_in <= 0 || dist_out <= 0)
return A;
double scale = dist_out/dist_in;
out /= scale;
// Find the centroids then shift to the origin
Eigen::Vector3d in_ctr = Eigen::Vector3d::Zero();
Eigen::Vector3d out_ctr = Eigen::Vector3d::Zero();
for (int col = 0; col < in.cols(); col++) {
in_ctr += in.col(col);
out_ctr += out.col(col);
}
in_ctr /= in.cols();
out_ctr /= out.cols();
for (int col = 0; col < in.cols(); col++) {
in.col(col) -= in_ctr;
out.col(col) -= out_ctr;
}
// SVD
Eigen::MatrixXd Cov = in * out.transpose();
Eigen::JacobiSVD<Eigen::MatrixXd> svd(Cov, Eigen::ComputeThinU | Eigen::ComputeThinV);
// Find the rotation
double d = (svd.matrixV() * svd.matrixU().transpose()).determinant();
if (d > 0)
d = 1.0;
else
d = -1.0;
Eigen::Matrix3d I = Eigen::Matrix3d::Identity(3, 3);
I(2, 2) = d;
Eigen::Matrix3d R = svd.matrixV() * I * svd.matrixU().transpose();
// The final transform
A.linear() = scale * R;
A.translation() = scale*(out_ctr - R*in_ctr);
return A;
}
void robot_model::FloatingJointModel::computeJointStateValues(const Eigen::Affine3d& transf, std::vector<double> &joint_values) const
{
joint_values.resize(7);
joint_values[0] = transf.translation().x();
joint_values[1] = transf.translation().y();
joint_values[2] = transf.translation().z();
Eigen::Quaterniond q(transf.rotation());
joint_values[3] = q.x();
joint_values[4] = q.y();
joint_values[5] = q.z();
joint_values[6] = q.w();
}
void NDTFuserHMT::initialize(Eigen::Affine3d initPos, pcl::PointCloud<pcl::PointXYZ> &cloud, bool preLoad)
{
///Set the cloud to sensor frame with respect to base
lslgeneric::transformPointCloudInPlace(sensor_pose, cloud);
lslgeneric::transformPointCloudInPlace(initPos, cloud);
Tnow = initPos;
//#ifdef BASELINE
//#else
if(beHMT) {
map = new lslgeneric::NDTMapHMT(resolution,
Tnow.translation()(0),Tnow.translation()(1),Tnow.translation()(2),
map_size_x,map_size_y,map_size_z,sensor_range,hmt_map_dir,true);
if(preLoad) {
lslgeneric::NDTMapHMT *map_hmt = dynamic_cast<lslgeneric::NDTMapHMT*> (map);
std::cout<<"Trying to pre-load maps at "<<initPos.translation()<<std::endl;
map_hmt->tryLoadPosition(initPos.translation());
}
} else {
map = new lslgeneric::NDTMap(new lslgeneric::LazyGrid(resolution));
if(preLoad) {
char fname[1000];
snprintf(fname,999,"%s/%s_map.jff",hmt_map_dir.c_str(),prefix.c_str());
std::cerr<<"Loading "<<fname<<std::endl;
map->loadFromJFF(fname);
} else {
map = new lslgeneric::NDTMap(new lslgeneric::LazyGrid(resolution));
map->initialize(Tnow.translation()(0),Tnow.translation()(1),Tnow.translation()(2),map_size_x,map_size_y,map_size_z);
}
}
//#endif
map->addPointCloud(Tnow.translation(),cloud, 0.1, 100.0, 0.1);
//map->addPointCloudMeanUpdate(Tnow.translation(),cloud,localMapSize, 1e5, 1250, map_size_z/2, 0.06);
//map->addPointCloudMeanUpdate(Tnow.translation(),cloud,localMapSize, 0.1, 100.0, 0.1);
map->computeNDTCells(CELL_UPDATE_MODE_SAMPLE_VARIANCE, 1e5, 255, Tnow.translation(), 0.1);
isInit = true;
Tlast_fuse = Tnow;
Todom = Tnow;
if(visualize)
{
#ifndef NO_NDT_VIZ
// # error compiling with visualization
viewer->plotNDTSAccordingToOccupancy(-1,map);
//viewer->plotLocalNDTMap(cloud,resolution);
viewer->addTrajectoryPoint(Tnow.translation()(0),Tnow.translation()(1),Tnow.translation()(2)+0.5,1,0,0);
viewer->addTrajectoryPoint(Todom.translation()(0),Todom.translation()(1),Todom.translation()(2)+0.5,0,1,0);
viewer->displayTrajectory();
viewer->setCameraPointing(Tnow.translation()(0),Tnow.translation()(1),Tnow.translation()(2)+3);
viewer->repaint();
#endif
}
}
int ShapeGraspPlanner::createGrasp(const geometry_msgs::PoseStamped& pose,
double gripper_opening,
double gripper_pitch,
double x_offset,
double z_offset,
double quality)
{
moveit_msgs::Grasp grasp;
grasp.grasp_pose = pose;
// defaults
grasp.pre_grasp_posture = makeGraspPosture(gripper_opening);
grasp.grasp_posture = makeGraspPosture(0.0);
grasp.pre_grasp_approach = makeGripperTranslation(approach_frame_,
approach_min_translation_,
approach_desired_translation_);
grasp.post_grasp_retreat = makeGripperTranslation(retreat_frame_,
retreat_min_translation_,
retreat_desired_translation_,
-1.0); // retreat is in negative x direction
// initial pose
Eigen::Affine3d p = Eigen::Translation3d(pose.pose.position.x,
pose.pose.position.y,
pose.pose.position.z) *
Eigen::Quaterniond(pose.pose.orientation.w,
pose.pose.orientation.x,
pose.pose.orientation.y,
pose.pose.orientation.z);
// translate by x_offset, 0, z_offset
p = p * Eigen::Translation3d(x_offset, 0, z_offset);
// rotate by 0, pitch, 0
p = p * quaternionFromEuler(0.0, gripper_pitch, 0.0);
// apply grasp point -> planning frame offset
p = p * Eigen::Translation3d(-tool_offset_, 0, 0);
grasp.grasp_pose.pose.position.x = p.translation().x();
grasp.grasp_pose.pose.position.y = p.translation().y();
grasp.grasp_pose.pose.position.z = p.translation().z();
Eigen::Quaterniond q = (Eigen::Quaterniond)p.linear();
grasp.grasp_pose.pose.orientation.x = q.x();
grasp.grasp_pose.pose.orientation.y = q.y();
grasp.grasp_pose.pose.orientation.z = q.z();
grasp.grasp_pose.pose.orientation.w = q.w();
grasp.grasp_quality = quality;
grasps_.push_back(grasp);
return 1;
}
TEST_F(LoadPlanningModelsPr2, InitOK)
{
ASSERT_TRUE(urdf_ok_);
ASSERT_EQ(urdf_model_->getName(), "pr2_test");
robot_model::RobotModelPtr kmodel(new robot_model::RobotModel(urdf_model_, srdf_model_));
robot_state::RobotState ks(kmodel);
ks.setToRandomValues();
ks.setToDefaultValues();
robot_state::Transforms tf(kmodel->getModelFrame());
Eigen::Affine3d t1;
t1.setIdentity();
t1.translation() = Eigen::Vector3d(10.0, 1.0, 0.0);
tf.setTransform(t1, "some_frame_1");
Eigen::Affine3d t2(Eigen::Translation3d(10.0, 1.0, 0.0)*Eigen::AngleAxisd(0.5, Eigen::Vector3d::UnitY()));
tf.setTransform(t2, "some_frame_2");
Eigen::Affine3d t3;
t3.setIdentity();
t3.translation() = Eigen::Vector3d(0.0, 1.0, -1.0);
tf.setTransform(t3, "some_frame_3");
EXPECT_TRUE(tf.isFixedFrame("some_frame_1"));
EXPECT_FALSE(tf.isFixedFrame("base_footprint"));
EXPECT_TRUE(tf.isFixedFrame(kmodel->getModelFrame()));
Eigen::Affine3d x;
x.setIdentity();
tf.transformPose(ks, "some_frame_2", x, x);
EXPECT_TRUE(t2.translation() == x.translation());
EXPECT_TRUE(t2.rotation() == x.rotation());
tf.transformPose(ks, kmodel->getModelFrame(), x, x);
EXPECT_TRUE(t2.translation() == x.translation());
EXPECT_TRUE(t2.rotation() == x.rotation());
x.setIdentity();
tf.transformPose(ks, "r_wrist_roll_link", x, x);
EXPECT_NEAR(x.translation().x(), 0.585315, 1e-4);
EXPECT_NEAR(x.translation().y(), -0.188, 1e-4);
EXPECT_NEAR(x.translation().z(), 1.24001, 1e-4);
}
bool kinematic_constraints::PositionConstraint::equal(const KinematicConstraint &other, double margin) const
{
if (other.getType() != type_)
return false;
const PositionConstraint &o = static_cast<const PositionConstraint&>(other);
if (link_model_ == o.link_model_ && constraint_frame_id_ == o.constraint_frame_id_)
{
if ((offset_ - o.offset_).norm() > margin)
return false;
if (constraint_region_.size() != o.constraint_region_.size())
return false;
for (std::size_t i = 0 ; i < constraint_region_.size() ; ++i)
{
Eigen::Affine3d diff = constraint_region_pose_[i].inverse() * o.constraint_region_pose_[i];
if (diff.translation().norm() > margin)
return false;
if (!diff.rotation().isIdentity(margin))
return false;
if (fabs(constraint_region_[i]->computeVolume() - o.constraint_region_[i]->computeVolume()) >= margin)
return false;
}
return true;
}
return false;
}
Eigen::Isometry3d toIsometry(const Eigen::Affine3d& pose)
{
Eigen::Isometry3d p(pose.rotation());
p.translation() = pose.translation();
return p;
}
void
RGBID_SLAM::VisualizationManager::getPointCloud(pcl::PointCloud<pcl::PointXYZRGB>::Ptr whole_point_cloud)
{
IdToPoseMap::iterator id2pose_map_it;
IdToPointCloudMap::const_iterator id2pointcloud_map_it;
pcl::PointCloud<pcl::PointXYZRGB>::Ptr aux_point_cloud;
aux_point_cloud.reset(new pcl::PointCloud<pcl::PointXYZRGB>);
for (id2pose_map_it = id2pose_map_.begin();
id2pose_map_it != id2pose_map_.end();
id2pose_map_it++)
{
int kf_id = (*id2pose_map_it).first;
Eigen::Affine3d pose = (*id2pose_map_it).second;
id2pointcloud_map_it = id2pointcloud_map_.find(kf_id);
if (id2pointcloud_map_it != id2pointcloud_map_.end())
{
aux_point_cloud->clear();
copyPointCloud((*id2pointcloud_map_it).second, aux_point_cloud);
(*id2pointcloud_map_it).second->clear();
alignPointCloud(aux_point_cloud, pose.linear(), pose.translation());
*whole_point_cloud += *aux_point_cloud;
}
}
}
void myCallback1(const interaction_cursor_msgs::InteractionCursorUpdate poseSubscribed) {
// std::cout<<" i am in mycallback "<<std::endl;
target1 = Eigen::Affine3d::Identity();
Eigen::Quaterniond q(poseSubscribed.pose.pose.orientation.w,
poseSubscribed.pose.pose.orientation.x,
poseSubscribed.pose.pose.orientation.y,
poseSubscribed.pose.pose.orientation.z);
translation1 << poseSubscribed.pose.pose.position.x,
poseSubscribed.pose.pose.position.y,
poseSubscribed.pose.pose.position.z;
std::cout << " 3 " << std::endl;
rotation1 = q.toRotationMatrix();
target1.translation() = translation1;
target1.linear() = rotation1;
std::cout << "please move hydra to a proper place and click the button. " << std::endl;
if (poseSubscribed.button_state == 1) {
button1 = true;
}
}
TEST_F(DistanceFieldCollisionDetectionTester, LinksInCollision)
{
collision_detection::CollisionRequest req;
collision_detection::CollisionResult res1;
collision_detection::CollisionResult res2;
collision_detection::CollisionResult res3;
//req.contacts = true;
//req.max_contacts = 100;
req.group_name = "whole_body";
planning_models::KinematicState kstate(kmodel_);
kstate.setToDefaultValues();
Eigen::Affine3d offset = Eigen::Affine3d::Identity();
offset.translation().x() = .01;
kstate.getLinkState("base_link")->updateGivenGlobalLinkTransform(Eigen::Affine3d::Identity());
kstate.getLinkState("base_bellow_link")->updateGivenGlobalLinkTransform(offset);
acm_->setEntry("base_link", "base_bellow_link", false);
crobot_->checkSelfCollision(req, res1, kstate, *acm_);
ASSERT_TRUE(res1.collision);
acm_->setEntry("base_link", "base_bellow_link", true);
crobot_->checkSelfCollision(req, res2, kstate, *acm_);
ASSERT_FALSE(res2.collision);
// req.verbose = true;
kstate.getLinkState("r_gripper_palm_link")->updateGivenGlobalLinkTransform(Eigen::Affine3d::Identity());
kstate.getLinkState("l_gripper_palm_link")->updateGivenGlobalLinkTransform(offset);
acm_->setEntry("r_gripper_palm_link", "l_gripper_palm_link", false);
crobot_->checkSelfCollision(req, res3, kstate, *acm_);
ASSERT_TRUE(res3.collision);
}
void TestFind3DAffineTransform(){
// Create datasets with known transform
Eigen::Matrix3Xd in(3, 100), out(3, 100);
Eigen::Quaternion<double> Q(1, 3, 5, 2);
Q.normalize();
Eigen::Matrix3d R = Q.toRotationMatrix();
double scale = 2.0;
for (int row = 0; row < in.rows(); row++) {
for (int col = 0; col < in.cols(); col++) {
in(row, col) = log(2*row + 10.0)/sqrt(1.0*col + 4.0) + sqrt(col*1.0)/(row + 1.0);
}
}
Eigen::Vector3d S;
S << -5, 6, -27;
for (int col = 0; col < in.cols(); col++)
out.col(col) = scale*R*in.col(col) + S;
Eigen::Affine3d A = Find3DAffineTransform(in, out);
// See if we got the transform we expected
if ( (scale*R-A.linear()).cwiseAbs().maxCoeff() > 1e-13 ||
(S-A.translation()).cwiseAbs().maxCoeff() > 1e-13)
throw "Could not determine the affine transform accurately enough";
}
bool
pcl::EnsensoGrabber::estimateCalibrationPatternPose (Eigen::Affine3d &pattern_pose) const
{
if (!device_open_)
return (false);
if (running_)
return (false);
try
{
NxLibCommand estimate_pattern_pose (cmdEstimatePatternPose);
estimate_pattern_pose.execute ();
NxLibItem tf = estimate_pattern_pose.result ()[itmPatternPose];
// Convert tf into a matrix
if (!jsonTransformationToMatrix (tf.asJson (), pattern_pose))
return (false);
pattern_pose.translation () /= 1000.0; // Convert translation in meters (Ensenso API returns milimeters)
return (true);
}
catch (NxLibException &ex)
{
ensensoExceptionHandling (ex, "estimateCalibrationPatternPoses");
return (false);
}
}
void mesh_core::PlaneProjection::getFrame(Eigen::Affine3d& frame) const
{
frame.setIdentity();
frame.translation() = origin_;
frame.linear().col(0) = x_axis_;
frame.linear().col(1) = y_axis_;
frame.linear().col(2) = normal_;
}
inline std::string PrettyPrint(const Eigen::Affine3d& transform_to_print, const bool add_delimiters, const std::string& separator)
{
UNUSED(add_delimiters);
UNUSED(separator);
Eigen::Vector3d vector_to_print = transform_to_print.translation();
Eigen::Quaterniond quaternion_to_print(transform_to_print.rotation());
return "Affine3d <x: " + std::to_string(vector_to_print.x()) + " y: " + std::to_string(vector_to_print.y()) + " z: " + std::to_string(vector_to_print.z()) + ">, <x: " + std::to_string(quaternion_to_print.x()) + " y: " + std::to_string(quaternion_to_print.y()) + " z: " + std::to_string(quaternion_to_print.z()) + " w: " + std::to_string(quaternion_to_print.w()) + ">";
}
// Return the name of the handrail that intersects with the given pose.
std::string getHandrailAtPose(const ISSWorld& world, const Eigen::Affine3d& pose)
{
unsigned int handrail_idx = world.findHandrail(pose.translation());
if (handrail_idx < world.numHandrails())
return world.getHandrail(handrail_idx)->name;
return ""; // no handrail at pose
}
/**
* @function KState
*/
Eigen::Affine3d KState::xform() const {
Eigen::Affine3d xform = Eigen::Affine3d::Identity();
xform.linear() = body_rot.toRotationMatrix();
xform.translation() = body_pos;
return xform;
}
void RockinPNPActionServer::tf2Affine(tf::StampedTransform& tf, Eigen::Affine3d& T)
{
tf::Vector3 o=tf.getOrigin();
tf::Quaternion q_tf=tf.getRotation();
Eigen::Quaterniond q(q_tf[3],q_tf[0],q_tf[1],q_tf[2]);
Eigen::Matrix3d R(q);
Eigen::Vector3d t(o[0],o[1],o[2]);
T.linear()=R; T.translation()=t;
}
void ICPLocalization::addScanLineToPointCloud(Eigen::Affine3d body2Odo, Eigen::Affine3d body2World, Eigen::Affine3d laser2Body, const ::base::samples::LaserScan &scan_reading)
{
if(scansWithTransforms.size() == 0)
{
addLaserScan(body2Odo,body2World,laser2Body,scan_reading);
return;
}
/*
double max_rotation = 1.5 * conf_point_cloud.lines_per_point_cloud * conf_point_cloud.min_rotation_for_new_line;
double max_translation = 1.5 * conf_point_cloud.lines_per_point_cloud * conf_point_cloud.min_distance_travelled_for_new_line;
double max_head_movement = 1.5 * conf_point_cloud.lines_per_point_cloud * conf_point_cloud.min_rotation_head_for_new_line;
*/
bool add_laser_scan = true;
for( uint i = 0; i < scansWithTransforms.size(); i++)
{
Eigen::Affine3d diference( body2Odo.inverse() * scansWithTransforms.at(i).body2Odo );
Vector3d Ylaser2Body = laser2Body * Vector3d::UnitY() - laser2Body.translation();
Ylaser2Body.normalize();
Vector3d YlastLaser2Body = scansWithTransforms.back().laser2Body * Vector3d::UnitY() - scansWithTransforms.at(i).laser2Body.translation();
YlastLaser2Body.normalize();
double laserChange = acos(Ylaser2Body.dot(YlastLaser2Body));
double translation = diference.translation().norm();
double rotation = fabs(Eigen::AngleAxisd( diference.rotation() ).angle()) ;
add_laser_scan = add_laser_scan && ( rotation > conf_point_cloud.min_rotation_for_new_line || translation > conf_point_cloud.min_distance_travelled_for_new_line || laserChange > conf_point_cloud.min_rotation_head_for_new_line);
//if the distance is to big means the old laser scan is not consistent anymore.
// if( rotation > max_rotation|| translation > max_translation || laserChange > max_head_movement)
// {
// scansWithTransforms.erase(scansWithTransforms.begin() + i);
// scanCount--;
// std::cout << " IcpLocalization.cpp erasing old laser scan " << std::endl;
// }
/* std::cout <<" add new scan " << add_laser_scan << std::endl;
std::cout << "\t translation " << (translation > conf_point_cloud.min_distance_travelled_for_new_line)<< " " << translation << " > " << conf_point_cloud.min_distance_travelled_for_new_line << std::endl;
std::cout << "\t rotation " << (rotation > conf_point_cloud.min_rotation_for_new_line) << " " << rotation * 180 / M_PI << " > " << conf_point_cloud.min_rotation_for_new_line * 180 / M_PI << std::endl;
std::cout << "\t head " << (laserChange > conf_point_cloud.min_rotation_head_for_new_line) << " "<< laserChange * 180 / M_PI << " > " << conf_point_cloud.min_rotation_head_for_new_line * 180 / M_PI<< std::endl; */
if (!add_laser_scan)
break;
}
if ( add_laser_scan )
{
addLaserScan(body2Odo,body2World,laser2Body,scan_reading);
}
return;
}
ICPInputData ICPLocalization::generatePointcloudSample(ICPInputData originalData, Eigen::Affine3d offset)
{
ICPInputData newData;
newData.pc2World = offset * originalData.pc2World;
newData.pc2World.translation() = offset.translation() + originalData.pc2World.translation();
newData.pc = originalData.pc->clone();
newData.pointCloudTime = originalData.pointCloudTime;
return newData;
}
TEST(TfEigen, ConvertAffine3d)
{
const Eigen::Affine3d v(Eigen::Translation3d(1,2,3) * Eigen::AngleAxis<double>(1, Eigen::Vector3d::UnitX()));
Eigen::Affine3d v1;
geometry_msgs::Pose p1;
tf2::convert(v, p1);
tf2::convert(p1, v1);
EXPECT_EQ(v.translation(), v1.translation());
EXPECT_EQ(v.rotation(), v1.rotation());
}
TEST_F(FclCollisionDetectionTester, ContactReporting)
{
collision_detection::CollisionRequest req;
req.contacts = true;
req.max_contacts = 1;
robot_state::RobotState kstate(kmodel_);
kstate.setToDefaultValues();
kstate.update();
Eigen::Affine3d offset = Eigen::Affine3d::Identity();
offset.translation().x() = .01;
// kstate.getLinkState("base_link")->updateGivenGlobalLinkTransform(Eigen::Affine3d::Identity());
// kstate.getLinkState("base_bellow_link")->updateGivenGlobalLinkTransform(offset);
// kstate.getLinkState("r_gripper_palm_link")->updateGivenGlobalLinkTransform(Eigen::Affine3d::Identity());
// kstate.getLinkState("l_gripper_palm_link")->updateGivenGlobalLinkTransform(offset);
kstate.updateStateWithLinkAt("base_link", Eigen::Affine3d::Identity());
kstate.updateStateWithLinkAt("base_bellow_link", offset);
kstate.updateStateWithLinkAt("r_gripper_palm_link", Eigen::Affine3d::Identity());
kstate.updateStateWithLinkAt("l_gripper_palm_link", offset);
kstate.update();
acm_->setEntry("base_link", "base_bellow_link", false);
acm_->setEntry("r_gripper_palm_link", "l_gripper_palm_link", false);
collision_detection::CollisionResult res;
crobot_->checkSelfCollision(req, res, kstate, *acm_);
ASSERT_TRUE(res.collision);
EXPECT_EQ(res.contacts.size(),1);
EXPECT_EQ(res.contacts.begin()->second.size(),1);
res.clear();
req.max_contacts = 2;
req.max_contacts_per_pair = 1;
// req.verbose = true;
crobot_->checkSelfCollision(req, res, kstate, *acm_);
ASSERT_TRUE(res.collision);
EXPECT_EQ(res.contacts.size(), 2);
EXPECT_EQ(res.contacts.begin()->second.size(),1);
res.contacts.clear();
res.contact_count = 0;
req.max_contacts = 10;
req.max_contacts_per_pair = 2;
acm_.reset(new collision_detection::AllowedCollisionMatrix(kmodel_->getLinkModelNames(), false));
crobot_->checkSelfCollision(req, res, kstate, *acm_);
ASSERT_TRUE(res.collision);
EXPECT_LE(res.contacts.size(), 10);
EXPECT_LE(res.contact_count, 10);
}
