// Check PHI instructions at the beginning of MBB. It is assumed that
// calcRegsPassed has been run so BBInfo::isLiveOut is valid.
void MachineVerifier::checkPHIOps(const MachineBasicBlock *MBB) {
for (MachineBasicBlock::const_iterator BBI = MBB->begin(), BBE = MBB->end();
BBI != BBE && BBI->isPHI(); ++BBI) {
DenseSet<const MachineBasicBlock*> seen;
for (unsigned i = 1, e = BBI->getNumOperands(); i != e; i += 2) {
unsigned Reg = BBI->getOperand(i).getReg();
const MachineBasicBlock *Pre = BBI->getOperand(i + 1).getMBB();
if (!Pre->isSuccessor(MBB))
continue;
seen.insert(Pre);
BBInfo &PrInfo = MBBInfoMap[Pre];
if (PrInfo.reachable && !PrInfo.isLiveOut(Reg))
report("PHI operand is not live-out from predecessor",
&BBI->getOperand(i), i);
}
// Did we see all predecessors?
for (MachineBasicBlock::const_pred_iterator PrI = MBB->pred_begin(),
PrE = MBB->pred_end(); PrI != PrE; ++PrI) {
if (!seen.count(*PrI)) {
report("Missing PHI operand", BBI);
*OS << "BB#" << (*PrI)->getNumber()
<< " is a predecessor according to the CFG.\n";
}
}
}
}
bool PHIElimination::SplitPHIEdges(MachineFunction &MF,
MachineBasicBlock &MBB,
LiveVariables &LV,
MachineLoopInfo *MLI) {
if (MBB.empty() || !MBB.front().isPHI() || MBB.isLandingPad())
return false; // Quick exit for basic blocks without PHIs.
bool Changed = false;
for (MachineBasicBlock::const_iterator BBI = MBB.begin(), BBE = MBB.end();
BBI != BBE && BBI->isPHI(); ++BBI) {
for (unsigned i = 1, e = BBI->getNumOperands(); i != e; i += 2) {
unsigned Reg = BBI->getOperand(i).getReg();
MachineBasicBlock *PreMBB = BBI->getOperand(i+1).getMBB();
// We break edges when registers are live out from the predecessor block
// (not considering PHI nodes). If the register is live in to this block
// anyway, we would gain nothing from splitting.
// Avoid splitting backedges of loops. It would introduce small
// out-of-line blocks into the loop which is very bad for code placement.
if (PreMBB != &MBB &&
!LV.isLiveIn(Reg, MBB) && LV.isLiveOut(Reg, *PreMBB)) {
if (!MLI ||
!(MLI->getLoopFor(PreMBB) == MLI->getLoopFor(&MBB) &&
MLI->isLoopHeader(&MBB))) {
if (PreMBB->SplitCriticalEdge(&MBB, this)) {
Changed = true;
++NumCriticalEdgesSplit;
}
}
}
}
}
return Changed;
}
bool MachineCSE::isPhysDefTriviallyDead(unsigned Reg,
MachineBasicBlock::const_iterator I,
MachineBasicBlock::const_iterator E) {
unsigned LookAheadLeft = 5;
while (LookAheadLeft--) {
if (I == E)
// Reached end of block, register is obviously dead.
return true;
if (I->isDebugValue())
continue;
bool SeenDef = false;
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
const MachineOperand &MO = I->getOperand(i);
if (!MO.isReg() || !MO.getReg())
continue;
if (!TRI->regsOverlap(MO.getReg(), Reg))
continue;
if (MO.isUse())
return false;
SeenDef = true;
}
if (SeenDef)
// See a def of Reg (or an alias) before encountering any use, it's
// trivially dead.
return true;
++I;
}
return false;
}
bool MachineCSE::PhysRegDefsReach(MachineInstr *CSMI, MachineInstr *MI,
SmallSet<unsigned,8> &PhysRefs) const {
// For now conservatively returns false if the common subexpression is
// not in the same basic block as the given instruction.
MachineBasicBlock *MBB = MI->getParent();
if (CSMI->getParent() != MBB)
return false;
MachineBasicBlock::const_iterator I = CSMI; I = llvm::next(I);
MachineBasicBlock::const_iterator E = MI;
unsigned LookAheadLeft = LookAheadLimit;
while (LookAheadLeft) {
// Skip over dbg_value's.
while (I != E && I->isDebugValue())
++I;
if (I == E)
return true;
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
const MachineOperand &MO = I->getOperand(i);
if (!MO.isReg() || !MO.isDef())
continue;
unsigned MOReg = MO.getReg();
if (TargetRegisterInfo::isVirtualRegister(MOReg))
continue;
if (PhysRefs.count(MOReg))
return false;
}
--LookAheadLeft;
++I;
}
return false;
}
/// analyzePHINodes - Gather information about the PHI nodes in here. In
/// particular, we want to map the number of uses of a virtual register which is
/// used in a PHI node. We map that to the BB the vreg is coming from. This is
/// used later to determine when the vreg is killed in the BB.
///
void PHIElimination::analyzePHINodes(const MachineFunction& MF) {
for (MachineFunction::const_iterator I = MF.begin(), E = MF.end();
I != E; ++I)
for (MachineBasicBlock::const_iterator BBI = I->begin(), BBE = I->end();
BBI != BBE && BBI->isPHI(); ++BBI)
for (unsigned i = 1, e = BBI->getNumOperands(); i != e; i += 2)
++VRegPHIUseCount[BBVRegPair(BBI->getOperand(i+1).getMBB()->getNumber(),
BBI->getOperand(i).getReg())];
}
/// analyzePHINodes - Gather information about the PHI nodes in here. In
/// particular, we want to map the number of uses of a virtual register which is
/// used in a PHI node. We map that to the BB the vreg is coming from. This is
/// used later to determine when the vreg is killed in the BB.
///
void llvm::PHIElimination::analyzePHINodes(const MachineFunction& Fn) {
for (MachineFunction::const_iterator I = Fn.begin(), E = Fn.end();
I != E; ++I)
for (MachineBasicBlock::const_iterator BBI = I->begin(), BBE = I->end();
BBI != BBE && BBI->getOpcode() == TargetInstrInfo::PHI; ++BBI)
for (unsigned i = 1, e = BBI->getNumOperands(); i != e; i += 2)
++VRegPHIUseCount[BBVRegPair(BBI->getOperand(i + 1).getMBB(),
BBI->getOperand(i).getReg())];
}
/// analyzePHINodes - Gather information about the PHI nodes in here. In
/// particular, we want to map the variable information of a virtual register
/// which is used in a PHI node. We map that to the BB the vreg is coming from.
///
void LiveVariables::analyzePHINodes(const MachineFunction& Fn) {
for (MachineFunction::const_iterator I = Fn.begin(), E = Fn.end();
I != E; ++I)
for (MachineBasicBlock::const_iterator BBI = I->begin(), BBE = I->end();
BBI != BBE && BBI->getOpcode() == TargetInstrInfo::PHI; ++BBI)
for (unsigned i = 1, e = BBI->getNumOperands(); i != e; i += 2)
PHIVarInfo[BBI->getOperand(i + 1).getMBB()->getNumber()]
.push_back(BBI->getOperand(i).getReg());
}
bool llvm::PHIElimination::SplitPHIEdges(MachineFunction &MF,
MachineBasicBlock &MBB,
LiveVariables &LV) {
if (MBB.empty() || !MBB.front().isPHI() || MBB.isLandingPad())
return false; // Quick exit for basic blocks without PHIs.
for (MachineBasicBlock::const_iterator BBI = MBB.begin(), BBE = MBB.end();
BBI != BBE && BBI->isPHI(); ++BBI) {
for (unsigned i = 1, e = BBI->getNumOperands(); i != e; i += 2) {
unsigned Reg = BBI->getOperand(i).getReg();
MachineBasicBlock *PreMBB = BBI->getOperand(i+1).getMBB();
// We break edges when registers are live out from the predecessor block
// (not considering PHI nodes). If the register is live in to this block
// anyway, we would gain nothing from splitting.
if (!LV.isLiveIn(Reg, MBB) && LV.isLiveOut(Reg, *PreMBB))
SplitCriticalEdge(PreMBB, &MBB);
}
}
return true;
}
/// addNewBlock - Add a new basic block BB as an empty succcessor to DomBB. All
/// variables that are live out of DomBB will be marked as passing live through
/// BB.
void LiveVariables::addNewBlock(MachineBasicBlock *BB,
MachineBasicBlock *DomBB,
MachineBasicBlock *SuccBB) {
const unsigned NumNew = BB->getNumber();
// All registers used by PHI nodes in SuccBB must be live through BB.
for (MachineBasicBlock::const_iterator BBI = SuccBB->begin(),
BBE = SuccBB->end(); BBI != BBE && BBI->isPHI(); ++BBI)
for (unsigned i = 1, e = BBI->getNumOperands(); i != e; i += 2)
if (BBI->getOperand(i+1).getMBB() == BB)
getVarInfo(BBI->getOperand(i).getReg()).AliveBlocks.set(NumNew);
// Update info for all live variables
for (unsigned Reg = TargetRegisterInfo::FirstVirtualRegister,
E = MRI->getLastVirtReg()+1; Reg != E; ++Reg) {
VarInfo &VI = getVarInfo(Reg);
if (!VI.AliveBlocks.test(NumNew) && VI.isLiveIn(*SuccBB, Reg, *MRI))
VI.AliveBlocks.set(NumNew);
}
}
bool
MachineCSE::isPhysDefTriviallyDead(unsigned Reg,
MachineBasicBlock::const_iterator I,
MachineBasicBlock::const_iterator E) const {
unsigned LookAheadLeft = LookAheadLimit;
while (LookAheadLeft) {
// Skip over dbg_value's.
while (I != E && I->isDebugValue())
++I;
if (I == E)
// Reached end of block, register is obviously dead.
return true;
bool SeenDef = false;
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
const MachineOperand &MO = I->getOperand(i);
if (MO.isRegMask() && MO.clobbersPhysReg(Reg))
SeenDef = true;
if (!MO.isReg() || !MO.getReg())
continue;
if (!TRI->regsOverlap(MO.getReg(), Reg))
continue;
if (MO.isUse())
// Found a use!
return false;
SeenDef = true;
}
if (SeenDef)
// See a def of Reg (or an alias) before encountering any use, it's
// trivially dead.
return true;
--LookAheadLeft;
++I;
}
return false;
}
bool MachineVerifier::runOnMachineFunction(MachineFunction &MF) {
raw_ostream *OutFile = 0;
if (OutFileName) {
std::string ErrorInfo;
OutFile = new raw_fd_ostream(OutFileName, ErrorInfo,
raw_fd_ostream::F_Append);
if (!ErrorInfo.empty()) {
errs() << "Error opening '" << OutFileName << "': " << ErrorInfo << '\n';
exit(1);
}
OS = OutFile;
} else {
OS = &errs();
}
foundErrors = 0;
this->MF = &MF;
TM = &MF.getTarget();
TII = TM->getInstrInfo();
TRI = TM->getRegisterInfo();
MRI = &MF.getRegInfo();
LiveVars = NULL;
LiveInts = NULL;
LiveStks = NULL;
Indexes = NULL;
if (PASS) {
LiveInts = PASS->getAnalysisIfAvailable<LiveIntervals>();
// We don't want to verify LiveVariables if LiveIntervals is available.
if (!LiveInts)
LiveVars = PASS->getAnalysisIfAvailable<LiveVariables>();
LiveStks = PASS->getAnalysisIfAvailable<LiveStacks>();
Indexes = PASS->getAnalysisIfAvailable<SlotIndexes>();
}
visitMachineFunctionBefore();
for (MachineFunction::const_iterator MFI = MF.begin(), MFE = MF.end();
MFI!=MFE; ++MFI) {
visitMachineBasicBlockBefore(MFI);
for (MachineBasicBlock::const_iterator MBBI = MFI->begin(),
MBBE = MFI->end(); MBBI != MBBE; ++MBBI) {
if (MBBI->getParent() != MFI) {
report("Bad instruction parent pointer", MFI);
*OS << "Instruction: " << *MBBI;
continue;
}
visitMachineInstrBefore(MBBI);
for (unsigned I = 0, E = MBBI->getNumOperands(); I != E; ++I)
visitMachineOperand(&MBBI->getOperand(I), I);
visitMachineInstrAfter(MBBI);
}
visitMachineBasicBlockAfter(MFI);
}
visitMachineFunctionAfter();
if (OutFile)
delete OutFile;
else if (foundErrors)
report_fatal_error("Found "+Twine(foundErrors)+" machine code errors.");
// Clean up.
regsLive.clear();
regsDefined.clear();
regsDead.clear();
regsKilled.clear();
regsLiveInButUnused.clear();
MBBInfoMap.clear();
return false; // no changes
}
bool MachineCSE::PhysRegDefsReach(MachineInstr *CSMI, MachineInstr *MI,
SmallSet<unsigned,8> &PhysRefs,
SmallVector<unsigned,2> &PhysDefs,
bool &NonLocal) const {
// For now conservatively returns false if the common subexpression is
// not in the same basic block as the given instruction. The only exception
// is if the common subexpression is in the sole predecessor block.
const MachineBasicBlock *MBB = MI->getParent();
const MachineBasicBlock *CSMBB = CSMI->getParent();
bool CrossMBB = false;
if (CSMBB != MBB) {
if (MBB->pred_size() != 1 || *MBB->pred_begin() != CSMBB)
return false;
for (unsigned i = 0, e = PhysDefs.size(); i != e; ++i) {
if (MRI->isAllocatable(PhysDefs[i]) || MRI->isReserved(PhysDefs[i]))
// Avoid extending live range of physical registers if they are
//allocatable or reserved.
return false;
}
CrossMBB = true;
}
MachineBasicBlock::const_iterator I = CSMI; I = llvm::next(I);
MachineBasicBlock::const_iterator E = MI;
MachineBasicBlock::const_iterator EE = CSMBB->end();
unsigned LookAheadLeft = LookAheadLimit;
while (LookAheadLeft) {
// Skip over dbg_value's.
while (I != E && I != EE && I->isDebugValue())
++I;
if (I == EE) {
assert(CrossMBB && "Reaching end-of-MBB without finding MI?");
(void)CrossMBB;
CrossMBB = false;
NonLocal = true;
I = MBB->begin();
EE = MBB->end();
continue;
}
if (I == E)
return true;
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
const MachineOperand &MO = I->getOperand(i);
// RegMasks go on instructions like calls that clobber lots of physregs.
// Don't attempt to CSE across such an instruction.
if (MO.isRegMask())
return false;
if (!MO.isReg() || !MO.isDef())
continue;
unsigned MOReg = MO.getReg();
if (TargetRegisterInfo::isVirtualRegister(MOReg))
continue;
if (PhysRefs.count(MOReg))
return false;
}
--LookAheadLeft;
++I;
}
return false;
}
bool AccessFrequency::runOnMachineFunction(MachineFunction &mf)
{
MF = &mf;
MRI = &mf.getRegInfo();
TRI = MF->getTarget().getRegisterInfo();
m_nVars = 0;
const llvm::Function *fn = mf.getFunction();
std::string szMain = "main";
if(fn->getName() != szMain && g_hFuncCall[szMain].find(fn->getName()) == g_hFuncCall[szMain].end() )
{
errs() << "--------qali:--------Skip function " << fn->getName() << " in AccessFrequency !\n";
return true;
}
for (MachineFunction::const_iterator FI = MF->begin(), FE = MF->end();
FI != FE; ++FI)
{
double dFactor = 0.0;
const BasicBlock *bb = FI->getBasicBlock();
if( bb != NULL )
{
//const std::map<const Function *, std::map<const BasicBlock *, double> > &hF2B2Acc =(SP->BlockInformation);
std::map<const Function *, std::map<const BasicBlock *, double> >::const_iterator f2b2acc_p, E = g_hF2B2Acc->end();
if( (f2b2acc_p = g_hF2B2Acc->find(fn) ) != E )
{
std::map<const BasicBlock *, double>::const_iterator b2acc_p, EE = f2b2acc_p->second.end();
if( (b2acc_p = f2b2acc_p->second.find(bb) ) != EE )
dFactor = b2acc_p->second;
}
}
if( dFactor == 0.0 )
dFactor = 1.0;
for (MachineBasicBlock::const_iterator BBI = FI->begin(), BBE = FI->end();
BBI != BBE; ++BBI)
{
DEBUG(BBI->print(dbgs(), NULL ));
//MachineInstr *MI = BBI;
for (unsigned i = 0, e = BBI->getNumOperands(); i != e; ++ i)
{
const MachineOperand &MO = BBI->getOperand(i);
// TODO (qali#1#): To hack other kinds of MachineOperands
switch (MO.getType() )
{
case MachineOperand::MO_Register:
if( MO.getReg() != 0
&& TargetRegisterInfo::isVirtualRegister(MO.getReg()) )
{
unsigned MOReg = MO.getReg();
unsigned int nSize = getRegSize(MOReg);
if( MO.isUse() )
{
int nAcc = ROUND(dFactor);
m_RegReadMap[MOReg] = m_RegReadMap[MOReg] + dFactor;
//if( nAcc >= 1)
m_SimTrace.push_back(llvm::TraceRecord(MOReg, nAcc));
}
else if( MO.isDef())
{
int nAcc = ROUND(dFactor);
m_RegWriteMap[MOReg] = m_RegWriteMap[MOReg] + dFactor;
//if( nAcc >= 1)
m_SimTrace.push_back(llvm::TraceRecord(MOReg, nAcc, false));
}
else
assert("Unrecoganized operation in AccessFrequency::runOnMachineFunction!\n");
}
break;
default:
break;
}
}
// Analyze the memoperations
if(!BBI->memoperands_empty() )
{
for( MachineInstr::mmo_iterator i = BBI->memoperands_begin(), e = BBI->memoperands_end();
i != e; ++ i) {
if( (*i)->isLoad() )
{
const char *tmp = (**i).getValue()->getName().data();
m_StackReadMap[tmp] ++;
}
else if( (*i)->isStore())
{
const char *tmp = (**i).getValue()->getName().data();
m_StackWriteMap[tmp] ++;
}
else
{
assert(false);
dbgs() << __FILE__ << __LINE__;
}
}
}
}
}
m_nVars = m_RegReadMap.size();
//print(afout);
//printInt(afout);
//reset();
std::string szInfo;
std::string szSrcFile = mf.getMMI().getModule()->getModuleIdentifier();
std::string szFile = szSrcFile + ".accInt";
raw_fd_ostream accIfout(szFile.c_str(), szInfo, raw_fd_ostream::F_Append );
printInt(accIfout);
accIfout.close();
szFile = szSrcFile + ".acc";
raw_fd_ostream accfout(szFile.c_str(), szInfo, raw_fd_ostream::F_Append );
print(accfout);
accfout.close();
szFile = szSrcFile + "." + "var";
raw_fd_ostream varfout(szFile.c_str(), szInfo, raw_fd_ostream::F_Append );
printVars(varfout);
varfout.close();
szFile = szSrcFile + ".read";
raw_fd_ostream readfout(szFile.c_str(), szInfo, raw_fd_ostream::F_Append );
printRead(readfout);
readfout.close();
szFile = szSrcFile + ".write";
raw_fd_ostream writefout(szFile.c_str(), szInfo, raw_fd_ostream::F_Append );
printWrite(writefout);
writefout.close();
szFile = szSrcFile + ".size";
raw_fd_ostream sizefout(szFile.c_str(), szInfo, raw_fd_ostream::F_Append );
printSize(sizefout);
sizefout.close();
return true;
}
