void
RexTerrainEngineNode::traverse(osg::NodeVisitor& nv)
{
if ( nv.getVisitorType() == nv.UPDATE_VISITOR && _quickReleaseInstalled == false )
{
osg::Camera* cam = findFirstParentOfType<osg::Camera>( this );
if ( cam )
{
// get the installed PDC so we can nest them:
osg::Camera::DrawCallback* cbToNest = cam->getPostDrawCallback();
// if it's another QR callback, we'll just replace it.
QuickReleaseGLObjects* previousQR = dynamic_cast<QuickReleaseGLObjects*>(cbToNest);
if ( previousQR )
cbToNest = previousQR->_next.get();
cam->setPostDrawCallback( new QuickReleaseGLObjects(_deadTiles.get(), cbToNest) );
_quickReleaseInstalled = true;
OE_INFO << LC << "Quick release enabled" << std::endl;
// knock down the trav count set in the constructor.
ADJUST_UPDATE_TRAV_COUNT( this, -1 );
}
}
if ( nv.getVisitorType() == nv.CULL_VISITOR )
{
// Inform the registry of the current frame so that Tiles have access
// to the information.
if ( _liveTiles.valid() && nv.getFrameStamp() )
{
_liveTiles->setTraversalFrame( nv.getFrameStamp()->getFrameNumber() );
}
}
#if 0
static int c = 0;
if ( ++c % 60 == 0 )
{
OE_NOTICE << LC << "Live = " << _liveTiles->size() << ", Dead = " << _deadTiles->size() << std::endl;
_liveTiles->run( CheckForOrphans() );
}
#endif
if ( _loader.valid() ) // ensures that postInitialize has run
{
TraversalData* tdata = TraversalData::get(nv);
if ( tdata )
{
RefUID& uid = tdata->getOrCreate<RefUID>("landcover.zone");
getEngineContext()->_landCoverData->_currentZoneIndex = uid;
}
// Pass the tile creation context to the traversal.
osg::ref_ptr<osg::Referenced> data = nv.getUserData();
nv.setUserData( this->getEngineContext() );
osgUtil::CullVisitor* cv = static_cast<osgUtil::CullVisitor*>(&nv);
this->getEngineContext()->startCull( cv );
TerrainEngineNode::traverse( nv );
this->getEngineContext()->endCull( cv );
if ( data.valid() )
nv.setUserData( data.get() );
}
else
{
TerrainEngineNode::traverse( nv );
}
}
bool
PagerLoader::load(Loader::Request* request, float priority, osg::NodeVisitor& nv)
{
// check that the request is not already completed but unmerged:
//if ( request && !request->isMerging() && nv.getDatabaseRequestHandler() )
if ( request && !request->isMerging() && !request->isFinished() && nv.getDatabaseRequestHandler() )
{
//OE_INFO << LC << "load (" << request->getTileKey().str() << ")" << std::endl;
unsigned fn = 0;
if ( nv.getFrameStamp() )
{
fn = nv.getFrameStamp()->getFrameNumber();
request->setFrameNumber( fn );
}
bool addToRequestSet = false;
// lock the request since multiple cull traversals might hit this function.
request->lock();
{
request->setState(Request::RUNNING);
// remember the last tick at which this request was submitted
request->_lastTick = osg::Timer::instance()->tick();
// update the priority
request->_priority = priority;
// timestamp it
request->setFrameNumber( fn );
// incremenet the load count.
request->_loadCount++;
// if this is the first load request since idle, we need to remember this request.
addToRequestSet = (request->_loadCount == 1);
}
request->unlock();
char filename[64];
sprintf(filename, "%u.%u.osgearth_rex_loader", request->_uid, _engineUID);
//std::string filename = Stringify() << request->_uid << "." << _engineUID << ".osgearth_rex_loader";
// scale from LOD to 0..1 range, more or less
// TODO: need to balance this with normal PagedLOD priority setup
float scaledPriority = priority / 20.0f;
nv.getDatabaseRequestHandler()->requestNodeFile(
filename,
_myNodePath,
priority,
nv.getFrameStamp(),
request->_internalHandle,
_dboptions.get() );
// remember the request:
if ( true ) // addToRequestSet // Not sure whether we need to keep doing this in order keep it sorted -- check it out.
{
Threading::ScopedMutexLock lock( _requestsMutex );
_requests[request->getUID()] = request;
}
return true;
}
return false;
}
void
PagerLoader::traverse(osg::NodeVisitor& nv)
{
// only called when _mergesPerFrame > 0
if ( nv.getVisitorType() == nv.UPDATE_VISITOR )
{
if ( nv.getFrameStamp() )
{
setFrameStamp(nv.getFrameStamp());
}
int count;
for(count=0; count < _mergesPerFrame && !_mergeQueue.empty(); ++count)
{
Request* req = _mergeQueue.begin()->get();
if ( req && req->_lastTick >= _checkpoint )
{
OE_START_TIMER(req_apply);
req->apply( getFrameStamp() );
double s = OE_STOP_TIMER(req_apply);
req->setState(Request::FINISHED);
}
_mergeQueue.erase( _mergeQueue.begin() );
}
// cull finished requests.
{
Threading::ScopedMutexLock lock( _requestsMutex );
unsigned fn = 0;
if ( nv.getFrameStamp() )
fn = nv.getFrameStamp()->getFrameNumber();
// Purge expired requests.
for(Requests::iterator i = _requests.begin(); i != _requests.end(); )
{
Request* req = i->second.get();
if ( req->isFinished() )
{
//OE_INFO << LC << req->getName() << "(" << i->second->getUID() << ") finished." << std::endl;
req->setState( Request::IDLE );
if ( REPORT_ACTIVITY )
Registry::instance()->endActivity( req->getName() );
_requests.erase( i++ );
}
else if ( !req->isMerging() && (fn - req->getLastFrameSubmitted() > 2) )
{
//OE_INFO << LC << req->getName() << "(" << i->second->getUID() << ") died waiting after " << fn-req->getLastFrameSubmitted() << " frames" << std::endl;
req->setState( Request::IDLE );
if ( REPORT_ACTIVITY )
Registry::instance()->endActivity( req->getName() );
_requests.erase( i++ );
}
else // still valid.
{
++i;
}
}
//OE_NOTICE << LC << "PagerLoader: requests=" << _requests.size() << "; mergeQueue=" << _mergeQueue.size() << std::endl;
}
}
LoaderGroup::traverse( nv );
}
// MOST of this is copied and pasted from OSG's osg::PagedLOD::traverse,
// except where otherwise noted with an "osgEarth" comment.
void
TilePagedLOD::traverse(osg::NodeVisitor& nv)
{
// set the frame number of the traversal so that external nodes can find out how active this
// node is.
if (nv.getFrameStamp() &&
nv.getVisitorType()==osg::NodeVisitor::CULL_VISITOR)
{
setFrameNumberOfLastTraversal(nv.getFrameStamp()->getFrameNumber());
// osgEarth: update our progress tracker to prevent tile cancelation.
if (_progress.valid())
{
_progress->update( nv.getFrameStamp()->getFrameNumber() );
}
}
double timeStamp = nv.getFrameStamp()?nv.getFrameStamp()->getReferenceTime():0.0;
unsigned int frameNumber = nv.getFrameStamp()?nv.getFrameStamp()->getFrameNumber():0;
bool updateTimeStamp = nv.getVisitorType()==osg::NodeVisitor::CULL_VISITOR;
switch(nv.getTraversalMode())
{
case(osg::NodeVisitor::TRAVERSE_ALL_CHILDREN):
std::for_each(_children.begin(),_children.end(),osg::NodeAcceptOp(nv));
break;
case(osg::NodeVisitor::TRAVERSE_ACTIVE_CHILDREN):
{
osg::ref_ptr<MPTerrainEngineNode> engine;
MPTerrainEngineNode::getEngineByUID( _engineUID, engine );
if (!engine.valid())
return;
// Compute the required range.
float required_range = -1.0;
if (engine->getComputeRangeCallback())
{
required_range = (*engine->getComputeRangeCallback())(this, nv);
}
// If we don't have a callback or it return a negative number fallback on the original calculation.
if (required_range < 0.0)
{
if (_rangeMode==DISTANCE_FROM_EYE_POINT)
{
required_range = nv.getDistanceToViewPoint(getCenter(),true);
if (_rangeFactor.isSet())
required_range /= _rangeFactor.get();
}
else
{
osg::CullStack* cullStack = dynamic_cast<osg::CullStack*>(&nv);
if (cullStack && cullStack->getLODScale()>0.0f)
{
required_range = cullStack->clampedPixelSize(getBound()) / cullStack->getLODScale();
}
else
{
// fallback to selecting the highest res tile by
// finding out the max range
for(unsigned int i=0;i<_rangeList.size();++i)
{
required_range = osg::maximum(required_range,_rangeList[i].first);
}
}
}
}
int lastChildTraversed = -1;
bool needToLoadChild = false;
for(unsigned int i=0;i<_rangeList.size();++i)
{
if (_rangeList[i].first<=required_range && required_range<_rangeList[i].second)
{
if (i<_children.size())
{
if (updateTimeStamp)
{
_perRangeDataList[i]._timeStamp=timeStamp;
_perRangeDataList[i]._frameNumber=frameNumber;
}
_children[i]->accept(nv);
lastChildTraversed = (int)i;
}
else
{
needToLoadChild = true;
}
}
}
#ifdef INHERIT_VIEWPOINT_CAMERAS_CANNOT_SUBDIVIDE
// Prevents an INHERIT_VIEWPOINT camera from invoking tile subdivision
if (needToLoadChild)
{
osgUtil::CullVisitor* cv = dynamic_cast<osgUtil::CullVisitor*>(&nv);
if ( cv && cv->getCurrentCamera() && cv->getCurrentCamera()->getReferenceFrame() == osg::Camera::ABSOLUTE_RF_INHERIT_VIEWPOINT )
needToLoadChild = false;
}
#endif
if (needToLoadChild)
{
unsigned int numChildren = _children.size();
// select the last valid child.
if (numChildren>0 && ((int)numChildren-1)!=lastChildTraversed)
{
if (updateTimeStamp)
{
_perRangeDataList[numChildren-1]._timeStamp=timeStamp;
_perRangeDataList[numChildren-1]._frameNumber=frameNumber;
}
_children[numChildren-1]->accept(nv);
}
// now request the loading of the next unloaded child.
if (!_disableExternalChildrenPaging &&
nv.getDatabaseRequestHandler() &&
numChildren<_perRangeDataList.size())
{
// osgEarth: Perform a tile visibility check before requesting the new tile.
// Intersect the tile's earth-aligned bounding box with the current culling frustum.
bool tileIsVisible = true;
if (nv.getVisitorType() == nv.CULL_VISITOR &&
numChildren < _childBBoxes.size() &&
_childBBoxes[numChildren].valid())
{
osgUtil::CullVisitor* cv = Culling::asCullVisitor( nv );
// wish that CullStack::createOrReuseRefMatrix() was public
osg::ref_ptr<osg::RefMatrix> mvm = new osg::RefMatrix(*cv->getModelViewMatrix());
mvm->preMult( _childBBoxMatrices[numChildren] );
cv->pushModelViewMatrix( mvm.get(), osg::Transform::RELATIVE_RF );
tileIsVisible = !cv->isCulled( _childBBoxes[numChildren] );
cv->popModelViewMatrix();
}
if ( tileIsVisible )
{
// [end:osgEarth]
// compute priority from where abouts in the required range the distance falls.
float priority = (_rangeList[numChildren].second-required_range)/(_rangeList[numChildren].second-_rangeList[numChildren].first);
// invert priority for PIXEL_SIZE_ON_SCREEN mode
if(_rangeMode==PIXEL_SIZE_ON_SCREEN)
{
priority = -priority;
}
// modify the priority according to the child's priority offset and scale.
priority = _perRangeDataList[numChildren]._priorityOffset + priority * _perRangeDataList[numChildren]._priorityScale;
if (_databasePath.empty())
{
nv.getDatabaseRequestHandler()->requestNodeFile(_perRangeDataList[numChildren]._filename,nv.getNodePath(),priority,nv.getFrameStamp(), _perRangeDataList[numChildren]._databaseRequest, _databaseOptions.get());
}
else
{
// prepend the databasePath to the child's filename.
nv.getDatabaseRequestHandler()->requestNodeFile(_databasePath+_perRangeDataList[numChildren]._filename,nv.getNodePath(),priority,nv.getFrameStamp(), _perRangeDataList[numChildren]._databaseRequest, _databaseOptions.get());
}
}
}
}
break;
}
default:
break;
}
}
void
ClampingCullSet::accept(osg::NodeVisitor& nv)
{
if ( nv.getVisitorType() == nv.CULL_VISITOR )
{
ProxyCullVisitor* cv = dynamic_cast<ProxyCullVisitor*>(&nv);
// We will use the visitor's path to prevent doubely-applying the statesets
// of common ancestors
const osg::NodePath& nvPath = nv.getNodePath();
int frame = nv.getFrameStamp() ? nv.getFrameStamp()->getFrameNumber() : 0u;
unsigned passed = 0u;
for( std::vector<Entry>::iterator entry = _entries.begin(); entry != _entries.end(); ++entry )
{
if ( frame - entry->_frame > 1 )
continue;
// If there's an active (non-identity matrix), apply it
if ( entry->_matrix.valid() )
{
entry->_matrix->postMult( *cv->getModelViewMatrix() );
cv->pushModelViewMatrix( entry->_matrix.get(), osg::Transform::RELATIVE_RF );
}
// After pushing the matrix, we can perform the culling bounds test.
if (!cv->isCulledByProxyFrustum(*entry->_node.get()))
{
// Apply the statesets in the entry's node path, but skip over the ones that are
// shared with the current visitor's path since they are already in effect.
// Count them so we can pop them later.
int numStateSets = 0;
osg::RefNodePath nodePath;
if ( entry->_path.getRefNodePath(nodePath) )
{
for(unsigned i=0; i<nodePath.size(); ++i)
{
if (nodePath[i].valid())
{
if (i >= nvPath.size() || nvPath[i] != nodePath[i].get())
{
osg::StateSet* stateSet = nodePath[i]->getStateSet();
if ( stateSet )
{
cv->getCullVisitor()->pushStateSet( stateSet );
++numStateSets;
}
}
}
}
}
// Cull the DrapeableNode's children (but not the DrapeableNode itself!)
for(unsigned i=0; i<entry->_node->getNumChildren(); ++i)
{
entry->_node->getChild(i)->accept( nv );
}
// pop the same number we pushed
for(int i=0; i<numStateSets; ++i)
{
cv->getCullVisitor()->popStateSet();
}
++passed;
}
// pop the model view:
if ( entry->_matrix.valid() )
{
cv->popModelViewMatrix();
}
//Registry::instance()->startActivity("ClampingCullSet", Stringify() << std::hex << this << std::dec << " / " << passed << "/" << _entries.size());
}
// mark this set so it will reset for the next frame
_frameCulled = true;
}
}
void TileNode::cull(osg::NodeVisitor& nv)
{
if ( nv.getFrameStamp() )
{
_lastTraversalFrame.exchange( nv.getFrameStamp()->getFrameNumber() );
}
unsigned currLOD = getTileKey().getLOD();
osgUtil::CullVisitor* cv = static_cast<osgUtil::CullVisitor*>( &nv );
EngineContext* context = static_cast<EngineContext*>( nv.getUserData() );
const SelectionInfo& selectionInfo = context->getSelectionInfo();
if ( context->progress() )
context->progress()->stats()["TileNode::cull"]++;
// determine whether we can and should subdivide to a higher resolution:
bool subdivide =
shouldSubDivide(nv, selectionInfo, cv->getLODScale());
// whether it is OK to create child TileNodes is necessary.
bool canCreateChildren = subdivide;
// whether it is OK to load data if necessary.
bool canLoadData = true;
if ( _dirty && context->getOptions().progressive() == true )
{
// Don't create children in progressive mode until content is in place
canCreateChildren = false;
}
else
{
// If this is an inherit-viewpoint camera, we don't need it to invoke subdivision
// because we want only the tiles loaded by the true viewpoint.
const osg::Camera* cam = cv->getCurrentCamera();
if ( cam && cam->getReferenceFrame() == osg::Camera::ABSOLUTE_RF_INHERIT_VIEWPOINT )
{
canCreateChildren = false;
canLoadData = false;
}
}
optional<bool> surfaceVisible;
// If *any* of the children are visible, subdivide.
if (subdivide)
{
// We are in range of the child nodes. Either draw them or load them.
// If the children don't exist, create them and inherit the parent's data.
if ( getNumChildren() == 0 && canCreateChildren )
{
Threading::ScopedMutexLock exclusive(_mutex);
if ( getNumChildren() == 0 )
{
createChildren( context );
}
}
// If all are ready, traverse them now.
if ( getNumChildren() == 4 )
{
for(int i=0; i<4; ++i)
{
_children[i]->accept( nv );
}
}
// If we don't traverse the children, traverse this node's payload.
else if ( _surface.valid() )
{
surfaceVisible = acceptSurface( cv, context );
}
}
// If children are outside camera range, draw the payload and expire the children.
else if ( _surface.valid() )
{
surfaceVisible = acceptSurface( cv, context );
if ( getNumChildren() >= 4 && context->maxLiveTilesExceeded() )
{
if (getSubTile(0)->isDormant( nv ) &&
getSubTile(1)->isDormant( nv ) &&
getSubTile(2)->isDormant( nv ) &&
getSubTile(3)->isDormant( nv ))
{
expireChildren( nv );
}
}
}
// Traverse land cover data at this LOD.
int zoneIndex = context->_landCoverData->_currentZoneIndex;
if ( zoneIndex < (int)context->_landCoverData->_zones.size() )
{
unsigned clearMask = cv->getCurrentCamera()->getClearMask();
bool isDepthCamera = ((clearMask & GL_COLOR_BUFFER_BIT) == 0u) && ((clearMask & GL_DEPTH_BUFFER_BIT) != 0u);
bool isShadowCamera = osgEarth::Shadowing::isShadowCamera(cv->getCurrentCamera());
// only consider land cover if we are capturing color OR shadow.
if ( isShadowCamera || !isDepthCamera )
{
const LandCoverZone& zone = context->_landCoverData->_zones.at(zoneIndex);
for(int i=0; i<zone._bins.size(); ++i)
{
bool pushedPayloadSS = false;
const LandCoverBin& bin = zone._bins.at(i);
if ( bin._lod == _key.getLOD() && (!isShadowCamera || bin._castShadows) )
{
if ( !pushedPayloadSS )
{
cv->pushStateSet( _payloadStateSet.get() );
pushedPayloadSS = true;
}
cv->pushStateSet( bin._stateSet.get() ); // hopefully groups together for rendering.
_landCover->accept( nv );
cv->popStateSet();
}
if ( pushedPayloadSS )
{
cv->popStateSet();
}
}
}
}
// If this tile is marked dirty, try loading data.
if ( _dirty && canLoadData )
{
// Only load data if the surface would be visible to the camera
if ( !surfaceVisible.isSet() )
{
surfaceVisible = _surface->isVisible(cv);
}
if ( surfaceVisible == true )
{
load( nv );
}
else
{
OE_DEBUG << LC << "load skipped for " << _key.str() << std::endl;
}
}
}
void osgParticle::ParticleProcessor::traverse(osg::NodeVisitor& nv)
{
// typecast the NodeVisitor to CullVisitor
osgUtil::CullVisitor* cv = nv.asCullVisitor();
// continue only if the visitor actually is a cull visitor
if (cv) {
// continue only if the particle system is valid
if (_ps.valid())
{
if (nv.getFrameStamp())
{
ParticleSystem::ScopedWriteLock lock(*(_ps->getReadWriteMutex()));
//added- 1/17/06- [email protected]
//a check to make sure we havent updated yet this frame
if(_frameNumber < nv.getFrameStamp()->getFrameNumber())
{
// retrieve the current time
double t = nv.getFrameStamp()->getSimulationTime();
// reset this processor if we've reached the reset point
if ((_currentTime >= _resetTime) && (_resetTime > 0))
{
_currentTime = 0;
_t0 = -1;
}
// skip if we haven't initialized _t0 yet
if (_t0 != -1)
{
// check whether the processor is alive
bool alive = false;
if (_currentTime >= _startTime)
{
if (_endless || (_currentTime < (_startTime + _lifeTime)))
alive = true;
}
// update current time
_currentTime += t - _t0;
// process only if the particle system is not frozen/culled
// We need to allow at least 2 frames difference, because the particle system's lastFrameNumber
// is updated in the draw thread which may not have completed yet.
if (alive &&
_enabled &&
!_ps->isFrozen() &&
(!_ps->getFreezeOnCull() || ((nv.getFrameStamp()->getFrameNumber()-_ps->getLastFrameNumber()) <= 2)) )
{
// initialize matrix flags
_need_ltw_matrix = true;
_need_wtl_matrix = true;
_current_nodevisitor = &nv;
// do some process (unimplemented in this base class)
process( t - _t0 );
} else {
//The values of _previous_wtl_matrix and _previous_ltw_matrix will be invalid
//since processing was skipped for this frame
_first_ltw_compute = true;
_first_wtl_compute = true;
}
}
_t0 = t;
}
//added- 1/17/06- [email protected]
//updates the _frameNumber, keeping it current
_frameNumber = nv.getFrameStamp()->getFrameNumber();
}
else
{
OSG_WARN << "osgParticle::ParticleProcessor::traverse(NodeVisitor&) requires a valid FrameStamp to function, particles not updated.\n";
}
} else
{
OSG_WARN << "ParticleProcessor \"" << getName() << "\": invalid particle system\n";
}
}
// call the inherited method
Node::traverse(nv);
}
void
SilverLiningContextNode::traverse(osg::NodeVisitor& nv)
{
if ( _SL && _SL->ready() )
{
if ( nv.getVisitorType() == nv.UPDATE_VISITOR )
{
int frameNumber = nv.getFrameStamp()->getFrameNumber();
_skyDrawable->dirtyBound();
if( _cloudsDrawable )
{
if ( _lastAltitude <= *_options.cloudsMaxAltitude() )
{
if ( _cloudsDrawable->getNumParents() == 0 )
_geode->addDrawable( _cloudsDrawable.get() );
_cloudsDrawable->dirtyBound();
}
else
{
if ( _cloudsDrawable->getNumParents() > 0 )
_geode->removeDrawable( _cloudsDrawable.get() );
}
}
}
else if ( nv.getVisitorType() == nv.CULL_VISITOR )
{
osgUtil::CullVisitor* cv = Culling::asCullVisitor(nv);
osg::Camera* camera = cv->getCurrentCamera();
if ( camera )
{
#ifndef SL_USE_CULL_MASK
//Check if this is the target camera for this context
if(getTargetCamera() == camera)
#endif
{
// TODO: make this multi-camera safe
_SL->setCameraPosition( nv.getEyePoint() );
osgUtil::CullVisitor* cv = Culling::asCullVisitor(nv);
_SL->getAtmosphere()->SetCameraMatrix( cv->getModelViewMatrix()->ptr() );
_SL->getAtmosphere()->SetProjectionMatrix( cv->getProjectionMatrix()->ptr() );
_lastAltitude = _SL->getSRS()->isGeographic() ?
cv->getEyePoint().length() - _SL->getSRS()->getEllipsoid()->getRadiusEquator() :
cv->getEyePoint().z();
_SL->updateLocation();
_SL->updateLight();
//_SL->getAtmosphere()->UpdateSkyAndClouds();
//_SL->getAtmosphere()->CullObjects();
}
}
}
}
if ( _geode.valid() )
{
_geode->accept(nv);
}
}
void PrecipitationEffect::traverse(osg::NodeVisitor& nv)
{
if (nv.getVisitorType() == osg::NodeVisitor::UPDATE_VISITOR)
{
if (_dirty) update();
if (nv.getFrameStamp())
{
double currentTime = nv.getFrameStamp()->getSimulationTime();
if (_previousFrameTime==FLT_MAX) _previousFrameTime = currentTime;
double delta = currentTime - _previousFrameTime;
_origin += _wind * delta;
_previousFrameTime = currentTime;
}
return;
}
if (nv.getVisitorType() == osg::NodeVisitor::NODE_VISITOR)
{
if (_dirty) update();
osgUtil::GLObjectsVisitor* globjVisitor = dynamic_cast<osgUtil::GLObjectsVisitor*>(&nv);
if (globjVisitor)
{
if (globjVisitor->getMode() & osgUtil::GLObjectsVisitor::COMPILE_STATE_ATTRIBUTES)
{
compileGLObjects(globjVisitor->getRenderInfo());
}
}
return;
}
if (nv.getVisitorType() != osg::NodeVisitor::CULL_VISITOR)
{
return;
}
osgUtil::CullVisitor* cv = dynamic_cast<osgUtil::CullVisitor*>(&nv);
if (!cv)
{
return;
}
ViewIdentifier viewIndentifier(cv, nv.getNodePath());
{
PrecipitationDrawableSet* precipitationDrawableSet = 0;
{
OpenThreads::ScopedLock<OpenThreads::Mutex> lock(_mutex);
precipitationDrawableSet = &(_viewDrawableMap[viewIndentifier]);
if (!precipitationDrawableSet->_quadPrecipitationDrawable)
{
precipitationDrawableSet->_quadPrecipitationDrawable = new PrecipitationDrawable;
precipitationDrawableSet->_quadPrecipitationDrawable->setRequiresPreviousMatrix(true);
precipitationDrawableSet->_quadPrecipitationDrawable->setGeometry(_quadGeometry.get());
precipitationDrawableSet->_quadPrecipitationDrawable->setStateSet(_quadStateSet.get());
precipitationDrawableSet->_quadPrecipitationDrawable->setDrawType(GL_QUADS);
precipitationDrawableSet->_linePrecipitationDrawable = new PrecipitationDrawable;
precipitationDrawableSet->_linePrecipitationDrawable->setRequiresPreviousMatrix(true);
precipitationDrawableSet->_linePrecipitationDrawable->setGeometry(_lineGeometry.get());
precipitationDrawableSet->_linePrecipitationDrawable->setStateSet(_lineStateSet.get());
precipitationDrawableSet->_linePrecipitationDrawable->setDrawType(GL_LINES);
precipitationDrawableSet->_pointPrecipitationDrawable = new PrecipitationDrawable;
precipitationDrawableSet->_pointPrecipitationDrawable->setRequiresPreviousMatrix(false);
precipitationDrawableSet->_pointPrecipitationDrawable->setGeometry(_pointGeometry.get());
precipitationDrawableSet->_pointPrecipitationDrawable->setStateSet(_pointStateSet.get());
precipitationDrawableSet->_pointPrecipitationDrawable->setDrawType(GL_POINTS);
}
}
cull(*precipitationDrawableSet, cv);
cv->pushStateSet(_stateset.get());
float depth = 0.0f;
if (!precipitationDrawableSet->_quadPrecipitationDrawable->getCurrentCellMatrixMap().empty())
{
cv->pushStateSet(precipitationDrawableSet->_quadPrecipitationDrawable->getStateSet());
cv->addDrawableAndDepth(precipitationDrawableSet->_quadPrecipitationDrawable.get(),cv->getModelViewMatrix(),depth);
cv->popStateSet();
}
if (!precipitationDrawableSet->_linePrecipitationDrawable->getCurrentCellMatrixMap().empty())
{
cv->pushStateSet(precipitationDrawableSet->_linePrecipitationDrawable->getStateSet());
cv->addDrawableAndDepth(precipitationDrawableSet->_linePrecipitationDrawable.get(),cv->getModelViewMatrix(),depth);
cv->popStateSet();
}
if (!precipitationDrawableSet->_pointPrecipitationDrawable->getCurrentCellMatrixMap().empty())
{
cv->pushStateSet(precipitationDrawableSet->_pointPrecipitationDrawable->getStateSet());
cv->addDrawableAndDepth(precipitationDrawableSet->_pointPrecipitationDrawable.get(),cv->getModelViewMatrix(),depth);
cv->popStateSet();
}
cv->popStateSet();
}
}
void TileNode::cull(osg::NodeVisitor& nv)
{
osgUtil::CullVisitor* cv = static_cast<osgUtil::CullVisitor*>( &nv );
EngineContext* context = static_cast<EngineContext*>( nv.getUserData() );
const SelectionInfo& selectionInfo = context->getSelectionInfo();
// record the number of drawables before culling this node:
unsigned before = RenderBinUtils::getTotalNumRenderLeaves( cv->getRenderStage() );
if ( context->progress() )
context->progress()->stats()["TileNode::cull"]++;
// determine whether we can and should subdivide to a higher resolution:
bool subdivide = shouldSubDivide(nv, selectionInfo, cv->getLODScale());
// whether it is OK to create child TileNodes is necessary.
bool canCreateChildren = subdivide;
// whether it is OK to load data if necessary.
bool canLoadData = true;
if ( _dirty && context->getOptions().progressive() == true )
{
// Don't create children in progressive mode until content is in place
canCreateChildren = false;
}
// If this is an inherit-viewpoint camera, we don't need it to invoke subdivision
// because we want only the tiles loaded by the true viewpoint.
const osg::Camera* cam = cv->getCurrentCamera();
if ( cam && cam->getReferenceFrame() == osg::Camera::ABSOLUTE_RF_INHERIT_VIEWPOINT )
{
canCreateChildren = false;
canLoadData = false;
}
optional<bool> surfaceVisible( false );
if (subdivide)
{
// We are in range of the child nodes. Either draw them or load them.
// If the children don't exist, create them and inherit the parent's data.
if ( getNumChildren() == 0 && canCreateChildren )
{
Threading::ScopedMutexLock exclusive(_mutex);
if ( getNumChildren() == 0 )
{
createChildren( context );
}
}
// If all are ready, traverse them now.
if ( getNumChildren() == 4 )
{
for(int i=0; i<4; ++i)
{
// pre-check each child for simple bounding sphere culling, and if the check
// fails, unload it's children if them exist. This lets us unload dormant
// tiles from memory as we go. If those children are visible from another
// camera, no worries, the unload attempt will fail gracefully.
if (!cv->isCulled(*_children[i].get()))
{
_children[i]->accept( nv );
}
else
{
context->getUnloader()->unloadChildren(getSubTile(i)->getTileKey());
}
}
}
// If we don't traverse the children, traverse this node's payload.
else if ( _surface.valid() )
{
surfaceVisible = acceptSurface( cv, context );
}
}
// If children are outside camera range, draw the payload and expire the children.
else if ( _surface.valid() )
{
surfaceVisible = acceptSurface( cv, context );
// if children exists, and are not in the process of loading, unload them now.
if ( !_dirty && _children.size() > 0 )
{
context->getUnloader()->unloadChildren( this->getTileKey() );
}
}
// See whether we actually added any drawables.
unsigned after = RenderBinUtils::getTotalNumRenderLeaves( cv->getRenderStage() );
bool addedDrawables = (after > before);
// Only continue if we accepted at least one surface drawable.
if ( addedDrawables )
{
// update the timestamp so this tile doesn't become dormant.
_lastTraversalFrame.exchange( nv.getFrameStamp()->getFrameNumber() );
}
context->invokeTilePatchCallbacks( cv, getTileKey(), _payloadStateSet.get(), _patch.get() );
// If this tile is marked dirty, try loading data.
if ( addedDrawables && _dirty && canLoadData )
{
// Only load data if the surface would be visible to the camera
if ( !surfaceVisible.isSet() )
{
surfaceVisible = _surface->isVisible(cv);
}
if ( surfaceVisible == true )
{
load( nv );
}
else
{
OE_DEBUG << LC << "load skipped for " << _key.str() << std::endl;
}
}
}
void Timeout::traverse(osg::NodeVisitor& nv)
{
if (nv.getVisitorType()==osg::NodeVisitor::CULL_VISITOR)
{
osgUtil::CullVisitor* cv = dynamic_cast<osgUtil::CullVisitor*>(&nv);
if (_displayTimeout && cv)
{
osgUtil::RenderStage* previous_stage = cv->getCurrentRenderBin()->getStage();
osg::ref_ptr<osgUtil::RenderStage> rs = new osgUtil::RenderStage;
osg::ColorMask* colorMask = previous_stage->getColorMask();
rs->setColorMask(colorMask);
// set up the viewport.
osg::Viewport* viewport = previous_stage->getViewport();
rs->setViewport( viewport );
rs->setClearMask(GL_DEPTH_BUFFER_BIT);
// record the render bin, to be restored after creation
// of the render to text
osgUtil::RenderBin* previousRenderBin = cv->getCurrentRenderBin();
// set the current renderbin to be the newly created stage.
cv->setCurrentRenderBin(rs.get());
// traverse the subgraph
{
Transform::traverse(nv);
}
// restore the previous renderbin.
cv->setCurrentRenderBin(previousRenderBin);
// and the render to texture stage to the current stages
// dependancy list.
cv->getCurrentRenderBin()->getStage()->addPostRenderStage(rs.get(),0);
}
}
else if (nv.getVisitorType()==osg::NodeVisitor::EVENT_VISITOR)
{
int deltaFrameNumber = (nv.getFrameStamp()->getFrameNumber()-_previousFrameNumber);
_previousFrameNumber = nv.getFrameStamp()->getFrameNumber();
bool needToRecordEventTime = false;
bool needToAction = false;
if (deltaFrameNumber>1)
{
needToRecordEventTime = true;
}
bool previous_displayTimeout = _displayTimeout;
bool needToDismiss = false;
osgGA::EventVisitor* ev = dynamic_cast<osgGA::EventVisitor*>(&nv);
osgViewer::Viewer* viewer = ev ? dynamic_cast<osgViewer::Viewer*>(ev->getActionAdapter()) : 0;
if (ev)
{
osgGA::EventQueue::Events& events = ev->getEvents();
for(osgGA::EventQueue::Events::iterator itr = events.begin();
itr != events.end();
++itr)
{
osgGA::GUIEventAdapter* event = itr->get();
bool keyEvent = event->getEventType()==osgGA::GUIEventAdapter::KEYDOWN || event->getEventType()==osgGA::GUIEventAdapter::KEYUP;
if (keyEvent && event->getKey()==_keyStartsTimoutDisplay)
{
OSG_NOTICE<<"_keyStartsTimoutDisplay pressed"<<std::endl;
_displayTimeout = true;
}
else if (keyEvent && event->getKey()==_keyDismissTimoutDisplay)
{
OSG_NOTICE<<"_keyDismissTimoutDisplay pressed"<<std::endl;
needToRecordEventTime = true;
needToDismiss = _displayTimeout;
_displayTimeout = false;
}
else if (keyEvent && event->getKey()==_keyRunTimeoutAction)
{
OSG_NOTICE<<"_keyRunTimeoutAction pressed"<<std::endl;
_displayTimeout = false;
needToRecordEventTime = true;
needToAction = true;
}
else if (event->getEventType()!=osgGA::GUIEventAdapter::FRAME)
{
needToRecordEventTime = true;
needToDismiss = _displayTimeout;
_displayTimeout = false;
}
}
}
if (needToRecordEventTime)
{
_timeOfLastEvent = nv.getFrameStamp()->getReferenceTime();
}
double timeSinceLastEvent = nv.getFrameStamp() ? nv.getFrameStamp()->getReferenceTime()-_timeOfLastEvent : 0.0;
if (timeSinceLastEvent>_idleDurationBeforeTimeoutDisplay)
{
_displayTimeout = true;
}
if (timeSinceLastEvent>_idleDurationBeforeTimeoutAction)
{
_displayTimeout = false;
needToAction = true;
needToDismiss = false;
}
if (!previous_displayTimeout && _displayTimeout)
{
if (viewer && (_displayBroadcastKeyPos._key!=0 || _displayBroadcastKeyPos._x!=FLT_MAX || _displayBroadcastKeyPos._y!=FLT_MAX))
{
OSG_NOTICE<<"Doing display broadcast key event"<<_displayBroadcastKeyPos._key<<std::endl;
broadcastEvent(viewer, _displayBroadcastKeyPos);
}
OperationVisitor leave(OperationVisitor::ENTER);
accept(leave);
if (leave.sleepTime()!=0.0)
{
OSG_NOTICE<<"Pausing for "<<leave.sleepTime()<<std::endl;
OpenThreads::Thread::microSleep(static_cast<unsigned int>(1000000.0*leave.sleepTime()));
OSG_NOTICE<<"Finished Pause "<<std::endl;
}
}
if (needToDismiss)
{
if (viewer && (_dismissBroadcastKeyPos._key!=0 || _dismissBroadcastKeyPos._x!=FLT_MAX || _dismissBroadcastKeyPos._y!=FLT_MAX))
{
OSG_NOTICE<<"Doing dismiss broadcast key event"<<_dismissBroadcastKeyPos._key<<std::endl;
broadcastEvent(viewer, _dismissBroadcastKeyPos);
}
OperationVisitor leave(OperationVisitor::LEAVE);
accept(leave);
}
Transform::traverse(nv);
if (needToAction)
{
OSG_NOTICE<<"Do timeout action"<<std::endl;
_previousFrameNumber = -1;
_timeOfLastEvent = nv.getFrameStamp()->getReferenceTime();
if (_actionJumpData.requiresJump())
{
OSG_NOTICE<<"Doing timeout jump"<<std::endl;
_actionJumpData.jump(SlideEventHandler::instance());
}
if (_actionKeyPos._key!=0 || _actionKeyPos._x!=FLT_MAX || _actionKeyPos._y!=FLT_MAX)
{
OSG_NOTICE<<"Doing timeout key event"<<_actionKeyPos._key<<std::endl;
if (SlideEventHandler::instance()) SlideEventHandler::instance()->dispatchEvent(_actionKeyPos);
}
if (viewer && (_actionBroadcastKeyPos._key!=0 || _actionBroadcastKeyPos._x!=FLT_MAX || _actionBroadcastKeyPos._y!=FLT_MAX))
{
OSG_NOTICE<<"Doing timeout broadcast key event"<<_actionBroadcastKeyPos._key<<std::endl;
broadcastEvent(viewer, _actionBroadcastKeyPos);
}
}
}
else if (nv.getVisitorType()==osg::NodeVisitor::UPDATE_VISITOR)
{
if (_displayTimeout) Transform::traverse(nv);
}
else
{
if (strcmp(nv.className(),"FindOperatorsVisitor")==0)
{
OSG_NOTICE<<"Timout::traverse() "<<nv.className()<<", ignoring traversal"<<std::endl;
}
else
{
Transform::traverse(nv);
}
}
}
void TXPPagedLOD::traverse(osg::NodeVisitor& nv)
{
//TileMapper* tileMapper = dynamic_cast<TileMapper*>(nv.getUserData());
//Modified by Brad Anderegg (May-27-08) because the black listing process appears to make tiles switch lods
//when they clearly shouldnt, in the worst cases a tile will page out that is right in front of you.
bool forceUseOfFirstChild = /*tileMapper ? (tileMapper->isNodeBlackListed(this)) :*/ false;
double timeStamp = nv.getFrameStamp()?nv.getFrameStamp()->getReferenceTime():0.0;
bool updateTimeStamp = nv.getVisitorType()==osg::NodeVisitor::CULL_VISITOR;
unsigned int frameNumber = nv.getFrameStamp()?nv.getFrameStamp()->getFrameNumber():0;
// set the frame number of the traversal so that external nodes can find out how active this
// node is.
if (nv.getFrameStamp() &&
nv.getVisitorType()==osg::NodeVisitor::CULL_VISITOR)
{
setFrameNumberOfLastTraversal(nv.getFrameStamp()->getFrameNumber());
}
switch(nv.getTraversalMode())
{
case(osg::NodeVisitor::TRAVERSE_ALL_CHILDREN):
std::for_each(_children.begin(),_children.end(),osg::NodeAcceptOp(nv));
break;
case(osg::NodeVisitor::TRAVERSE_ACTIVE_CHILDREN):
{
float distance = nv.getDistanceToEyePoint(getCenter(),true);
int lastChildTraversed = -1;
bool needToLoadChild = false;
unsigned maxRangeSize = _rangeList.size();
if (maxRangeSize!=0 && forceUseOfFirstChild)
maxRangeSize=1;
for(unsigned int i=0;i<maxRangeSize;++i)
{
if (forceUseOfFirstChild ||
(_rangeList[i].first<=distance && distance<_rangeList[i].second))
{
if (i<_children.size())
{
if (updateTimeStamp)
{
_perRangeDataList[i]._timeStamp=timeStamp;
_perRangeDataList[i]._frameNumber=frameNumber;
}
_children[i]->accept(nv);
lastChildTraversed = (int)i;
}
else
{
needToLoadChild = true;
}
}
}
if (needToLoadChild)
{
unsigned int numChildren = _children.size();
//std::cout<<"PagedLOD::traverse() - falling back "<<std::endl;
// select the last valid child.
if (numChildren>0 && ((int)numChildren-1)!=lastChildTraversed)
{
//std::cout<<" to child "<<numChildren-1<<std::endl;
if (updateTimeStamp)
_perRangeDataList[numChildren-1]._timeStamp=timeStamp;
_children[numChildren-1]->accept(nv);
}
// now request the loading of the next unload child.
if (nv.getDatabaseRequestHandler() && numChildren<_perRangeDataList.size())
{
// compute priority from where abouts in the required range the distance falls.
float priority = (_rangeList[numChildren].second-distance)/(_rangeList[numChildren].second-_rangeList[numChildren].first);
// modify the priority according to the child's priority offset and scale.
priority = _perRangeDataList[numChildren]._priorityOffset + priority * _perRangeDataList[numChildren]._priorityScale;
//std::cout<<" requesting child "<<_fileNameList[numChildren]<<" priotity = "<<priority<<std::endl;
nv.getDatabaseRequestHandler()->requestNodeFile(_perRangeDataList[numChildren]._filename,
nv.getNodePath(),
priority,
nv.getFrameStamp(),
_perRangeDataList[numChildren]._databaseRequest);
}
}
break;
}
default:
break;
}
}
void
RexTerrainEngineNode::traverse(osg::NodeVisitor& nv)
{
if (nv.getVisitorType() == nv.UPDATE_VISITOR)
{
if (_renderModelUpdateRequired)
{
UpdateRenderModels visitor(_mapFrame);
_terrain->accept(visitor);
_renderModelUpdateRequired = false;
}
TerrainEngineNode::traverse( nv );
}
else if ( nv.getVisitorType() == nv.CULL_VISITOR )
{
// Inform the registry of the current frame so that Tiles have access
// to the information.
if ( _liveTiles.valid() && nv.getFrameStamp() )
{
_liveTiles->setTraversalFrame( nv.getFrameStamp()->getFrameNumber() );
}
osgUtil::CullVisitor* cv = static_cast<osgUtil::CullVisitor*>(&nv);
getEngineContext()->startCull( cv );
TerrainCuller culler;
culler.setFrameStamp(new osg::FrameStamp(*nv.getFrameStamp()));
culler.setDatabaseRequestHandler(nv.getDatabaseRequestHandler());
culler.pushReferenceViewPoint(cv->getReferenceViewPoint());
culler.pushViewport(cv->getViewport());
culler.pushProjectionMatrix(cv->getProjectionMatrix());
culler.pushModelViewMatrix(cv->getModelViewMatrix(), cv->getCurrentCamera()->getReferenceFrame());
culler._camera = cv->getCurrentCamera();
culler._context = this->getEngineContext();
// Prepare the culler with the set of renderable layers:
culler.setup(_mapFrame, this->getEngineContext()->getRenderBindings());
// Assemble the terrain drawable:
_terrain->accept(culler);
// If we're using geometry pooling, optimize the drawable for shared state:
if (getEngineContext()->getGeometryPool()->isEnabled())
{
culler._terrain.sortDrawCommands();
}
// The common stateset for the terrain:
cv->pushStateSet(_terrain->getOrCreateStateSet());
// Push all the layers to draw on to the cull visitor,
// keeping track of render order.
LayerDrawable* lastLayer = 0L;
unsigned order = 0;
bool surfaceStateSetPushed = false;
//OE_INFO << "CULL\n";
for(LayerDrawableList::iterator i = culler._terrain.layers().begin();
i != culler._terrain.layers().end();
++i)
{
if (!i->get()->_tiles.empty())
{
lastLayer = i->get();
lastLayer->_order = -1;
// if this is a RENDERTYPE_TILE, we need to activate the default surface state set.
if (lastLayer->_renderType == Layer::RENDERTYPE_TILE)
{
lastLayer->_order = order++;
if (!surfaceStateSetPushed)
cv->pushStateSet(getSurfaceStateSet());
surfaceStateSetPushed = true;
}
else if (surfaceStateSetPushed)
{
cv->popStateSet();
surfaceStateSetPushed = false;
}
//OE_INFO << " Apply: " << (lastLayer->_layer ? lastLayer->_layer->getName() : "-1") << "; tiles=" << lastLayer->_tiles.size() << std::endl;
cv->apply(*lastLayer);
}
}
// The last layer to render must clear up the OSG state,
// otherwise it will be corrupt and can lead to crashing.
if (lastLayer)
{
lastLayer->_clearOsgState = true;
}
if (surfaceStateSetPushed)
{
cv->popStateSet();
surfaceStateSetPushed = false;
}
// pop the common terrain state set
cv->popStateSet();
this->getEngineContext()->endCull( cv );
// If the culler found any orphaned data, we need to update the render model
// during the next update cycle.
if (culler._orphanedPassesDetected > 0u)
{
_renderModelUpdateRequired = true;
OE_INFO << LC << "Detected " << culler._orphanedPassesDetected << " orphaned rendering passes\n";
}
// we don't call this b/c we don't want _terrain
//TerrainEngineNode::traverse(nv);
// traverse all the other children (geometry pool, loader/unloader, etc.)
_geometryPool->accept(nv);
_loader->accept(nv);
_unloader->accept(nv);
_releaser->accept(nv);
_rasterizer->accept(nv);
}
else
{
TerrainEngineNode::traverse( nv );
}
}
void TileNode::cull(osg::NodeVisitor& nv)
{
if ( nv.getFrameStamp() )
{
_lastTraversalFrame.exchange( nv.getFrameStamp()->getFrameNumber() );
}
unsigned currLOD = getTileKey().getLOD();
#if OSGEARTH_REX_TILE_NODE_DEBUG_TRAVERSAL
if (currLOD==0)
{
OE_INFO << LC <<"Traversing: "<<"\n";
}
#endif
osgUtil::CullVisitor* cv = dynamic_cast<osgUtil::CullVisitor*>( &nv );
EngineContext* context = static_cast<EngineContext*>( nv.getUserData() );
const SelectionInfo& selectionInfo = context->getSelectionInfo();
// determine whether we can and should subdivide to a higher resolution:
bool subdivide = shouldSubDivide(nv, selectionInfo, cv->getLODScale());
// If this is an inherit-viewpoint camera, we don't need it to invoke subdivision
// because we want only the tiles loaded by the true viewpoint.
bool canCreateChildren = subdivide;
const osg::Camera* cam = cv->getCurrentCamera();
if ( cam && cam->getReferenceFrame() == osg::Camera::ABSOLUTE_RF_INHERIT_VIEWPOINT )
{
canCreateChildren = false;
}
// If *any* of the children are visible, subdivide.
if (subdivide)
{
// We are in range of the child nodes. Either draw them or load them.
// If the children don't exist, create them and inherit the parent's data.
if ( getNumChildren() == 0 && canCreateChildren )
{
Threading::ScopedMutexLock exclusive(_mutex);
if ( getNumChildren() == 0 )
{
createChildren( context );
}
}
// All 4 children must be ready before we can traverse any of them:
unsigned numChildrenReady = 0;
if ( getNumChildren() == 4 )
{
for(unsigned i = 0; i < 4; ++i)
{
if ( getSubTile(i)->isReadyToTraverse() )
{
++numChildrenReady;
}
}
}
// If all are ready, traverse them now.
if ( numChildrenReady == 4 )
{
// TODO:
// When we do this, we need to quite sure that all 4 children will be accepted into
// the draw set. Perhaps isReadyToTraverse() needs to check that.
_children[0]->accept( nv );
_children[1]->accept( nv );
_children[2]->accept( nv );
_children[3]->accept( nv );
}
// If we don't traverse the children, traverse this node's payload.
else if ( _surface.valid() )
{
cullSurface( cv );
}
}
// If children are outside camera range, draw the payload and expire the children.
else if ( _surface.valid() )
{
cullSurface( cv );
if ( getNumChildren() >= 4 && context->maxLiveTilesExceeded() )
{
if (getSubTile(0)->isDormant( nv ) &&
getSubTile(1)->isDormant( nv ) &&
getSubTile(2)->isDormant( nv ) &&
getSubTile(3)->isDormant( nv ))
{
expireChildren( nv );
}
}
}
// Traverse land cover bins at this LOD.
for(int i=0; i<context->landCoverBins()->size(); ++i)
{
bool first = true;
const LandCoverBin& bin = context->landCoverBins()->at(i);
if ( bin._lod == getTileKey().getLOD() )
{
if ( first )
{
cv->pushStateSet( _payloadStateSet.get() );
}
cv->pushStateSet( bin._stateSet.get() );
_landCover->accept( nv );
cv->popStateSet();
if ( first )
{
cv->popStateSet();
first = false;
}
}
}
// If this tile is marked dirty, try loading data.
if ( _dirty )
{
load( nv );
}
}
void
DrapingCullSet::accept(osg::NodeVisitor& nv)
{
if ( nv.getVisitorType() == nv.CULL_VISITOR )
{
osgUtil::CullVisitor* cv = static_cast<osgUtil::CullVisitor*>( &nv );
// We will use the visitor's path to prevent doubely-applying the statesets
// of common ancestors
const osg::NodePath& nvPath = nv.getNodePath();
int frame = nv.getFrameStamp() ? nv.getFrameStamp()->getFrameNumber() : 0u;
for( std::vector<Entry>::iterator entry = _entries.begin(); entry != _entries.end(); ++entry )
{
if ( frame - entry->_frame > 1 )
continue;
// If there's an active (non-identity matrix), apply it
if ( entry->_matrix.valid() )
{
entry->_matrix->postMult( *cv->getModelViewMatrix() );
cv->pushModelViewMatrix( entry->_matrix.get(), osg::Transform::RELATIVE_RF );
}
// After pushing the matrix, we can perform the culling bounds test.
if ( !cv->isCulled( entry->_node->getBound() ) )
{
// Apply the statesets in the entry's node path, but skip over the ones that are
// shared with the current visitor's path since they are already in effect.
// Count them so we can pop them later.
int numStateSets = 0;
osg::RefNodePath nodePath;
if ( entry->_path.getRefNodePath(nodePath) )
{
for(unsigned i=0; i<nodePath.size(); ++i)
{
if (nodePath[i].valid())
{
if (i >= nvPath.size() || nvPath[i] != nodePath[i].get())
{
osg::StateSet* stateSet = nodePath[i]->getStateSet();
if ( stateSet )
{
cv->pushStateSet( stateSet );
++numStateSets;
}
}
}
}
}
// Cull the DrapeableNode's children (but not the DrapeableNode itself!)
// TODO: make sure we aren't skipping any cull callbacks, etc. by calling traverse
// instead of accept. (Cannot call accept b/c that calls traverse)
for(unsigned i=0; i<entry->_node->getNumChildren(); ++i)
{
entry->_node->getChild(i)->accept( nv );
}
// pop the same number we pushed
for(int i=0; i<numStateSets; ++i)
{
cv->popStateSet();
}
}
// pop the model view:
if ( entry->_matrix.valid() )
{
cv->popModelViewMatrix();
}
}
// mark this set so it will reset for the next frame
_frameCulled = true;
}
else
{
for( std::vector<Entry>::iterator entry = _entries.begin(); entry != _entries.end(); ++entry )
{
}
}
}
void
RexTerrainEngineNode::traverse(osg::NodeVisitor& nv)
{
if ( nv.getVisitorType() == nv.CULL_VISITOR )
{
// Inform the registry of the current frame so that Tiles have access
// to the information.
if ( _liveTiles.valid() && nv.getFrameStamp() )
{
_liveTiles->setTraversalFrame( nv.getFrameStamp()->getFrameNumber() );
}
}
#if 0
static int c = 0;
if ( ++c % 60 == 0 )
{
OE_NOTICE << LC << "Live = " << _liveTiles->size() << ", Dead = " << _deadTiles->size() << std::endl;
_liveTiles->run( CheckForOrphans() );
}
#endif
if ( nv.getVisitorType() == nv.CULL_VISITOR && _loader.valid() ) // ensures that postInitialize has run
{
osgUtil::CullVisitor* cv = static_cast<osgUtil::CullVisitor*>(&nv);
this->getEngineContext()->startCull( cv );
TerrainCuller culler;
culler.setFrameStamp(new osg::FrameStamp(*nv.getFrameStamp()));
culler.setDatabaseRequestHandler(nv.getDatabaseRequestHandler());
culler.pushReferenceViewPoint(cv->getReferenceViewPoint());
culler.pushViewport(cv->getViewport());
culler.pushProjectionMatrix(cv->getProjectionMatrix());
culler.pushModelViewMatrix(cv->getModelViewMatrix(), cv->getCurrentCamera()->getReferenceFrame());
culler._camera = cv->getCurrentCamera();
culler._context = this->getEngineContext();
culler.setup(*_update_mapf, this->getEngineContext()->getRenderBindings(), getSurfaceStateSet());
// Assemble the terrain drawable:
_terrain->accept(culler);
// If we're using geometry pooling, optimize the drawable for shared state:
if (getEngineContext()->getGeometryPool()->isEnabled())
{
culler._terrain.sortDrawCommands();
}
// The common stateset for the terrain:
cv->pushStateSet(_terrain->getOrCreateStateSet());
// Push all the layers to draw on to the cull visitor,
// keeping track of render order.
LayerDrawable* lastLayer = 0L;
unsigned order = 0;
bool surfaceStateSetPushed = false;
// OE_INFO << "CULL:\n";
for(LayerDrawableList::iterator i = culler._terrain.layers().begin();
i != culler._terrain.layers().end();
++i)
{
if (!i->get()->_tiles.empty())
{
lastLayer = i->get();
lastLayer->_order = -1;
// if this is a RENDERTYPE_TILE, we need to activate the default surface state set.
if (lastLayer->_layer && lastLayer->_layer->getRenderType() == Layer::RENDERTYPE_TILE)
{
lastLayer->_order = order++;
if (!surfaceStateSetPushed)
cv->pushStateSet(getSurfaceStateSet());
surfaceStateSetPushed = true;
}
else if (surfaceStateSetPushed)
{
cv->popStateSet();
surfaceStateSetPushed = false;
}
// OE_INFO << " Apply: " << (lastLayer->_layer ? lastLayer->_layer->getName() : "-1") << std::endl;
cv->apply(*lastLayer);
}
}
// The last layer to render must clear up the OSG state,
// otherwise it will be corrupt and can lead to crashing.
if (lastLayer)
{
lastLayer->_clearOsgState = true;
}
if (surfaceStateSetPushed)
{
cv->popStateSet();
surfaceStateSetPushed = false;
}
// pop the common terrain state set
cv->popStateSet();
this->getEngineContext()->endCull( cv );
// traverse all the other children (geometry pool, loader/unloader, etc.)
for (unsigned i = 0; i<getNumChildren(); ++i)
{
if (getChild(i) != _terrain.get())
getChild(i)->accept(nv);
}
}
//else
{
TerrainEngineNode::traverse( nv );
}
}
void SoundNode::traverse(osg::NodeVisitor &nv)
{
// continue only if the visitor actually is a cull visitor
if (nv.getVisitorType() == osg::NodeVisitor::CULL_VISITOR)
{
// Make sure we only execute this once during this frame.
// There could be two or more culls for stereo/multipipe...
if (!m_sound_state.valid()) {
// call the inherited method
osg::notify(osg::DEBUG_INFO) << "SoundNode::traverse() No soundstate attached to soundnode" << std::endl;
Node::traverse(nv);
return;
}
if ( m_sound_state.valid() && nv.getTraversalNumber() != m_last_traversal_number && nv.getFrameStamp())
{
m_last_traversal_number = nv.getTraversalNumber();
// retrieve the current time
double t = nv.getFrameStamp()->getReferenceTime();
double time = t - m_last_time;
if(time >= m_sound_manager->getUpdateFrequency()) {
osg::Matrix m;
m = osg::computeLocalToWorld(nv.getNodePath());
osg::Vec3 pos = m.getTrans();
m_sound_state->setPosition(pos);
//Calculate velocity
osg::Vec3 velocity(0,0,0);
if (m_first_run) {
m_first_run = false;
m_last_time = t;
m_last_pos = pos;
}
else {
velocity = pos - m_last_pos;
m_last_pos = pos;
m_last_time = t;
velocity /= time;
}
if(m_sound_manager->getClampVelocity()) {
float max_vel = m_sound_manager->getMaxVelocity();
float len = velocity.length();
if ( len > max_vel) {
velocity.normalize();
velocity *= max_vel;
}
}
m_sound_state->setVelocity(velocity);
//Get new direction
osg::Vec3 dir(0,1,0);
dir = dir * m;
dir.normalize();
m_sound_state->setDirection(dir);
// Only do occlusion calculations if the sound is playing
if (m_sound_state->getPlay() && m_occlude_callback.valid())
m_occlude_callback->apply(m_sound_manager->getListenerMatrix(), pos, m_sound_state.get());
} // if
}
} // if cullvisitor
// call the inherited method
Node::traverse(nv);
}
void
SilverLiningNode::traverse(osg::NodeVisitor& nv)
{
if ( _SL && _SL->ready() )
{
if ( nv.getVisitorType() == nv.UPDATE_VISITOR )
{
int frameNumber = nv.getFrameStamp()->getFrameNumber();
_skyDrawable->dirtyBound();
if( _cloudsDrawable )
{
if ( _lastAltitude <= *_options.cloudsMaxAltitude() )
{
if ( _cloudsDrawable->getNumParents() == 0 )
_geode->addDrawable( _cloudsDrawable.get() );
_cloudsDrawable->dirtyBound();
}
else
{
if ( _cloudsDrawable->getNumParents() > 0 )
_geode->removeDrawable( _cloudsDrawable.get() );
}
}
}
else if ( nv.getVisitorType() == nv.CULL_VISITOR )
{
// TODO: make this multi-camera safe
_SL->setCameraPosition( nv.getEyePoint() );
osgUtil::CullVisitor* cv = Culling::asCullVisitor(nv);
_SL->getAtmosphere()->SetCameraMatrix( cv->getModelViewMatrix()->ptr() );
_SL->getAtmosphere()->SetProjectionMatrix( cv->getProjectionMatrix()->ptr() );
_lastAltitude = _SL->getSRS()->isGeographic() ?
cv->getEyePoint().length() - _SL->getSRS()->getEllipsoid()->getRadiusEquator() :
cv->getEyePoint().z();
//if (_lastAltitude <= *_options.cloudsMaxAltitude() )
{
_SL->updateLocation();
_SL->updateLight();
_SL->getAtmosphere()->UpdateSkyAndClouds();
_SL->getAtmosphere()->CullObjects();
}
}
}
osgEarth::Util::SkyNode::traverse( nv );
if ( _geode.valid() )
{
_geode->accept(nv);
}
if ( _lightSource.valid() )
{
_lightSource->accept(nv);
}
}
