static void exynos5420_pmu_init(void)
{
unsigned int value;
int i;
/*
* Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers
* for local power blocks to Low initially as per Table 8-4:
* "System-Level Power-Down Configuration Registers".
*/
for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++)
pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]);
/* Enable USE_STANDBY_WFI for all CORE */
pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
value = pmu_raw_readl(EXYNOS_L2_OPTION(0));
value &= ~EXYNOS5_USE_RETENTION;
pmu_raw_writel(value, EXYNOS_L2_OPTION(0));
value = pmu_raw_readl(EXYNOS_L2_OPTION(1));
value &= ~EXYNOS5_USE_RETENTION;
pmu_raw_writel(value, EXYNOS_L2_OPTION(1));
/*
* If L2_COMMON is turned off, clocks related to ATB async
* bridge are gated. Thus, when ISP power is gated, LPI
* may get stuck.
*/
value = pmu_raw_readl(EXYNOS5420_LPI_MASK);
value |= EXYNOS5420_ATB_ISP_ARM;
pmu_raw_writel(value, EXYNOS5420_LPI_MASK);
value = pmu_raw_readl(EXYNOS5420_LPI_MASK1);
value |= EXYNOS5420_ATB_KFC;
pmu_raw_writel(value, EXYNOS5420_LPI_MASK1);
/* Prevent issue of new bus request from L2 memory */
value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION);
value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION);
value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION);
/* This setting is to reduce suspend/resume time */
pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3);
/* Serialized CPU wakeup of Eagle */
pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE);
pmu_raw_writel(SPREAD_USE_STANDWFI,
EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);
pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
pm_power_off = exynos5_power_off;
pr_info("EXYNOS5420 PMU initialized\n");
}
int __init exynos7420_pmu_init(void)
{
unsigned int tmp, i;
/* Enable USE_STANDBY_WFI for all CORE */
__raw_writel(EXYNOS5_USE_STANDBY_WFI_ALL |
EXYNOS_USE_PROLOGNED_LOGIC_RESET, EXYNOS_CENTRAL_SEQ_OPTION);
/* L2 use retention disable */
tmp = __raw_readl(EXYNOS_L2_OPTION(0));
tmp &= ~(USE_RETENTION | USE_STANDBYWFIL2);
tmp |= USE_DEACTIVATE_ACP | USE_DEACTIVATE_ACE;
__raw_writel(tmp, EXYNOS_L2_OPTION(0));
/* Use SC_FEEDBACK */
exynos_use_feedback();
/* Initialize setting for core */
exynos_core_option();
/* Initialize L2 cache */
for (i = 0; i < CLUSTER_NUM; i++) {
tmp = __raw_readl(EXYNOS_L2_OPTION(i));
tmp &= ~(USE_RETENTION | USE_AUTOMATIC_L2FLUSHREQ);
if (i == 0)
tmp |= (USE_STANDBYWFIL2 | USE_DEACTIVATE_ACP | USE_DEACTIVATE_ACE);
__raw_writel(tmp, EXYNOS_L2_OPTION(i));
}
/* Ignore LPI for ASATB at ATLAS */
exynos_atlas_asyncbridge_ignore_lpi();
/* UP Scheduler Enable */
tmp = __raw_readl(EXYNOS7420_UP_SCHEDULER);
tmp |= ENABLE_EAGLE_CPU;
__raw_writel(tmp, EXYNOS7420_UP_SCHEDULER);
/* Set PSHOLD port for output high and enable signal */
tmp = __raw_readl(EXYNOS7420_PS_HOLD_CONTROL);
tmp |= (EXYNOS_PS_HOLD_OUTPUT_HIGH | EXYNOS_PS_HOLD_EN);
__raw_writel(tmp, EXYNOS7420_PS_HOLD_CONTROL);
/* Skip block power down for ATLAS during automatic power down sequence */
tmp = __raw_readl(EXYNOS7420_ATLAS_CPUSEQUENCER_OPTION);
tmp |= SKIP_BLK_PWR_DOWN;
__raw_writel(tmp, EXYNOS7420_ATLAS_CPUSEQUENCER_OPTION);
/* Set clock freeze cycle before and after ARM clamp to 0 */
__raw_writel(0x0, EXYNOS7420_ATLAS_ARMCLK_STOPCTRL);
__raw_writel(0x0, EXYNOS7420_APOLLO_ARMCLK_STOPCTRL);
exynos_cpu.power_up = exynos7420_secondary_up;
exynos_cpu.power_down = exynos7420_cpu_down;
exynos_cpu.power_state = exynos7420_cpu_state;
pmu_cal_sys_init();
return 0;
}
static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_FSYS_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
{ EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
{ EXYNOS_L2_OPTION(0), { 0x10, 0x10, 0x0 } },
{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
static int __init exynos_pmu_init(void)
{
unsigned int value;
exynos_pmu_config = exynos4210_pmu_config;
if (soc_is_exynos4210()) {
exynos_pmu_config = exynos4210_pmu_config;
pr_info("EXYNOS4210 PMU Initialize\n");
} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
exynos_pmu_config = exynos4x12_pmu_config;
pr_info("EXYNOS4x12 PMU Initialize\n");
} else if (soc_is_exynos5250()) {
exynos5250_disable_isp();
exynos_pmu_config = exynos5250_pmu_config;
pm_power_off = exynos5_power_off;
pr_info("EXYNOS5250 PMU Initialize\n");
} else if (soc_is_exynos5420()) {
__raw_writel(0xfffff, EXYNOS5_XXTI_DURATION3);
/* Enable USE_STANDBY_WFI for all CORE */
__raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
S5P_CENTRAL_SEQ_OPTION);
value = __raw_readl(EXYNOS_L2_OPTION(0));
value &= ~EXYNOS5_USE_RETENTION;
__raw_writel(value, EXYNOS_L2_OPTION(0));
value = __raw_readl(EXYNOS_L2_OPTION(1));
value &= ~EXYNOS5_USE_RETENTION;
__raw_writel(value, EXYNOS_L2_OPTION(1));
/*
* If L2_COMMON is turned off, clocks related to ATB async
* bridge are gated. Thus, when ISP power is gated, LPI
* may get stuck.
*/
value = __raw_readl(EXYNOS5420_LPI_MASK);
value |= EXYNOS5420_ATB_ISP_ARM;
__raw_writel(value, EXYNOS5420_LPI_MASK);
value = __raw_readl(EXYNOS5420_LPI_MASK1);
value |= EXYNOS5420_ATB_KFC;
__raw_writel(value, EXYNOS5420_LPI_MASK1);
/* Prevent issue of new bus request from L2 memory */
value = __raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
__raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION);
value = __raw_readl(EXYNOS5420_KFC_COMMON_OPTION);
value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
__raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION);
/*
* This setting is to reduce suspend/resume time.
*/
__raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3);
/* Serialized CPU wakeup of Eagle */
__raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE);
__raw_writel(SPREAD_USE_STANDWFI,
EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);
__raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
exynos_pmu_config = exynos5420_pmu_config;
pm_power_off = exynos5_power_off;
pr_info("EXYNOS5420 PMU Initialized\n");
} else {
pr_info("EXYNOS: PMU not supported\n");
}
return 0;
}
static int __init exynos_pmu_init(void)
{
unsigned int value, i, j;
if (soc_is_exynos4210()) {
exynos_pmu_config = exynos4210_pmu_config;
pr_info("EXYNOS4210 PMU Initialize\n");
} else if (soc_is_exynos4212()) {
exynos_pmu_config = exynos4212_pmu_config;
pr_info("EXYNOS4212 PMU Initialize\n");
} else if (soc_is_exynos4412()) {
/* Follow registers should be set with 0x0 */
for (i = 0; i < ARRAY_SIZE(exynos4_list_disable_pmu_reg); i++)
__raw_writel(0x0, exynos4_list_disable_pmu_reg[i]);
exynos_pmu_config = exynos4412_pmu_config;
pr_info("EXYNOS4412 PMU Initialize\n");
} else if (soc_is_exynos5250()) {
/* Initialize for using delay reset assertion */
exynos_reset_assert_ctrl(true);
/*
* Set logic reset duration
*/
value = __raw_readl(EXYNOS5_LOGIC_RESET_DURATION3);
value &= ~EXYNOS5_DUR_WAIT_RESET_MASK;
value |= EXYNOS5_DUR_WAIT_RESET_MIN;
__raw_writel(value, EXYNOS5_LOGIC_RESET_DURATION3);
/*
* Follow registers should be set with 0x0
*/
for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_pmu_reg); i++)
__raw_writel(0x0, exynos5_list_disable_pmu_reg[i]);
exynos_pmu_config = exynos5250_pmu_config;
pr_info("EXYNOS5250 PMU Initialize\n");
} else if (soc_is_exynos5410()) {
/* Set Stable counter */
__raw_writel(0x3a98, EXYNOS5_XXTI_DURATION3);
__raw_writel(0x3fff, EXYNOS5_EXT_REGULATOR_DURATION3);
/* Enable USE_STANDBY_WFI for all CORE */
__raw_writel(EXYNOS5410_USE_STANDBY_WFI_ALL,
EXYNOS_CENTRAL_SEQ_OPTION);
value = __raw_readl(EXYNOS_L2_OPTION(0));
value &= ~EXYNOS5_USE_RETENTION;
__raw_writel(value, EXYNOS_L2_OPTION(0));
value = __raw_readl(EXYNOS_L2_OPTION(1));
value &= ~EXYNOS5_USE_RETENTION;
__raw_writel(value, EXYNOS_L2_OPTION(1));
/*
* If turn L2_COMMON off, clocks relating ATB async bridge is gated.
* So when ISP power is gated, LPI is stucked.
*/
value = __raw_readl(EXYNOS5410_LPI_MASK0);
value |= (ATB_ISP_ARM | ATB_KFC | ATB_NOC);
__raw_writel(value, EXYNOS5410_LPI_MASK0);
/*
* To prevent form issuing new bus request form L2 memory system
* If core status is power down, should be set '1' to L2 power down
*/
value = __raw_readl(EXYNOS5410_ARM_COMMON_OPTION);
value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
__raw_writel(value, EXYNOS5410_ARM_COMMON_OPTION);
/*
* DUR_WAIT_RESET : 0xF
* This setting is to reduce suspend/resume time.
*/
__raw_writel(DUR_WAIT_RESET, EXYNOS5410_LOGIC_RESET_DURATION3);
/* Serialized CPU wakeup of Eagle */
__raw_writel(SPREAD_ENABLE, EXYNOS5410_ARM_INTR_SPREAD_ENABLE);
__raw_writel(SPREAD_USE_STANDWFI, EXYNOS5410_ARM_INTR_SPREAD_USE_STANDBYWFI);
__raw_writel(0x1, EXYNOS5410_UP_SCHEDULER);
/*
* Set measure power on/off duration
* Use SC_USE_FEEDBACK
*/
exynos5410_init_pmu();
exynos_reset_assert_ctrl(true);
if (samsung_rev() < EXYNOS5410_REV_2_3) {
for (i = 0, j = 0; (exynos5410_pmu_config[i].reg != PMU_TABLE_END); i++) {
if (exynos5410_pmu_config[i].reg ==
exynos5410_rev21_pmu_config[j].reg) {
exynos5410_pmu_config[i].val[SYS_AFTR] =
exynos5410_rev21_pmu_config[j].val[SYS_AFTR];
exynos5410_pmu_config[i].val[SYS_LPA] =
exynos5410_rev21_pmu_config[j].val[SYS_LPA];
exynos5410_pmu_config[i].val[SYS_SLEEP] =
exynos5410_rev21_pmu_config[j].val[SYS_SLEEP];
if (exynos5410_rev21_pmu_config[++j].reg == PMU_TABLE_END)
break;
}
}
}
/* Follow registers should be set with 0x0 */
for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_pmu_reg); i++)
__raw_writel(0x0, exynos5_list_disable_pmu_reg[i]);
exynos_pmu_config = exynos5410_pmu_config;
pr_info("EXYNOS5410 PMU Initialize\n");
} else {
pr_info("EXYNOS: PMU not supported\n");
}
return 0;
}
