void LIB_EDIT_FRAME::OnOrient( wxCommandEvent& aEvent )
{
INSTALL_UNBUFFERED_DC( dc, m_canvas );
SCH_SCREEN* screen = GetScreen();
// Allows block rotate operation on hot key.
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
if( aEvent.GetId() == ID_LIBEDIT_MIRROR_X )
{
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetMessageBlock( this );
screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
HandleBlockEnd( &dc );
}
else if( aEvent.GetId() == ID_LIBEDIT_MIRROR_Y )
{
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetMessageBlock( this );
screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_Y );
HandleBlockEnd( &dc );
}
}
}
void WinEDA_GerberFrame::Process_Special_Functions(wxCommandEvent& event)
/********************************************************************************/
/* Traite les selections d'outils et les commandes appelees du menu POPUP
*/
{
int id = event.GetId();
int layer = GetScreen()->m_Active_Layer;
GERBER_Descr * gerber_layer = g_GERBER_Descr_List[layer];
wxPoint pos;
wxClientDC dc(DrawPanel);
DrawPanel->PrepareGraphicContext(&dc);
wxGetMousePosition(&pos.x, &pos.y);
pos.y += 20;
switch ( id ) // Arret eventuel de la commande de déplacement en cours
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_INVERT_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
/* ne devrait pas etre execute, sauf bug */
if (m_CurrentScreen->BlockLocate.m_Command != BLOCK_IDLE)
{
m_CurrentScreen->BlockLocate.m_Command = BLOCK_IDLE;
m_CurrentScreen->BlockLocate.m_State = STATE_NO_BLOCK;
m_CurrentScreen->BlockLocate.m_BlockDrawStruct = NULL;
}
if (m_ID_current_state == 0 )
SetToolID(0, wxCURSOR_ARROW, wxEmptyString);
else SetCursor(DrawPanel->m_PanelCursor = DrawPanel->m_PanelDefaultCursor);
break;
default: // Arret dea commande de déplacement en cours
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
SetToolID(0, wxCURSOR_ARROW, wxEmptyString);
break;
}
switch ( id ) // Traitement des commandes
{
case ID_EXIT :
Close(TRUE);
break;
case ID_NEW_PROJECT:
case ID_LOAD_PROJECT:
Files_io(event);
break;
case ID_PCB_GLOBAL_DELETE:
Erase_Current_Layer(&dc, TRUE);
break;
case wxID_CUT:
break;
case wxID_COPY:
break;
case wxID_PASTE:
// HandleBlockBegin(&dc, BLOCK_PASTE);
break;
case ID_UNDO_BUTT:
UnDeleteItem(&dc);
break;
case ID_GET_TOOLS:
// InstallToolsFrame(this, wxPoint(-1,-1) );
break;
case ID_FIND_ITEMS:
// InstallFindFrame(this, pos);
break;
case ID_BUS_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Add Tracks"));
break;
case ID_LINE_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Add Drawing"));
break;
case ID_TEXT_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Add Text"));
break;
case ID_NO_SELECT_BUTT:
SetToolID( 0, 0, wxEmptyString);
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_END_LINE:
DrawPanel->MouseToCursorSchema();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
DrawPanel->MouseToCursorSchema();
if ( GetScreen()->m_CurrentItem == NULL) break;
Delete_Segment(&dc, (TRACK*)GetScreen()->m_CurrentItem);
GetScreen()->m_CurrentItem = NULL;
GetScreen()->SetModify();
break;
case ID_PCB_DELETE_ITEM_BUTT:
SetToolID( id, wxCURSOR_PENCIL, wxT("Delete item"));
break;
case ID_POPUP_SCH_MOVE_ITEM_REQUEST:
DrawPanel->MouseToCursorSchema();
Process_Move_Item(this, GetScreen()->m_CurrentItem, &dc);
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
{
GetScreen()->m_Active_Layer = m_SelLayerBox->GetSelection();
DrawPanel->Refresh(TRUE);
break;
}
case ID_TOOLBARH_GERBER_SELECT_TOOL:
if ( gerber_layer )
{
int tool = m_SelLayerTool->GetSelection();
if ( tool > 0 ) tool = tool - 1 + FIRST_DCODE;
else tool = 0;
gerber_layer->m_Selected_Tool = tool;
DrawPanel->Refresh(TRUE);
}
else DisplayError(this, _("No layer selected") );
break;
case ID_GERBVIEW_SHOW_LIST_DCODES:
Liste_D_Codes(&dc);
break;
case ID_GERBVIEW_SHOW_SOURCE:
if ( gerber_layer )
{
wxString editorname = GetEditorName();
if ( ! editorname.IsEmpty() )
ExecuteFile(this, editorname, gerber_layer->m_FileName);
}
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_MOVE;
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockPlace(&dc);
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_COPY;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockEnd(&dc);
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_ZOOM;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_DELETE;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
default:
wxMessageBox( wxT("WinEDA_GerberFrame::Process_Special_Functions error"));
break;
}
SetToolbars();
}
void SCH_EDIT_FRAME::OnOrient( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
// Allows block rotate operation on hot key.
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
if( aEvent.GetId() == ID_SCH_MIRROR_X )
{
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetMessageBlock( this );
screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
HandleBlockEnd( &dc );
}
else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
{
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetMessageBlock( this );
screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_Y );
HandleBlockEnd( &dc );
}
else
{
wxFAIL_MSG( wxT( "Unknown block oriention command ID." ) );
}
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::OrientableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
if( aEvent.GetId() == ID_SCH_MIRROR_X )
OrientComponent( CMP_MIRROR_X );
else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
OrientComponent( CMP_MIRROR_Y );
else if( aEvent.GetId() == ID_SCH_ORIENT_NORMAL )
OrientComponent( CMP_NORMAL );
else
wxFAIL_MSG( wxT( "Invalid orient schematic component command ID." ) );
break;
case SCH_BITMAP_T:
if( aEvent.GetId() == ID_SCH_MIRROR_X )
MirrorImage( (SCH_BITMAP*) item, true );
else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
MirrorImage( (SCH_BITMAP*) item, false );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Schematic object type %s cannot be oriented." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
void SCH_EDIT_FRAME::OnDragItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::DraggableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LINE_T:
case SCH_JUNCTION_T:
if( item->GetLayer() == LAYER_BUS )
break;
// Fall thru if item is not on bus layer.
case SCH_COMPONENT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_SHEET_T:
m_canvas->MoveCursorToCrossHair();
// The easiest way to handle a drag component or sheet command
// is to simulate a block drag command
if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
{
if( !HandleBlockBegin( &dc, BLOCK_DRAG, GetCrossHairPosition() ) )
break;
// Give a non null size to the search block:
screen->m_BlockLocate.Inflate( 1 );
HandleBlockEnd( &dc );
}
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot drag schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
}
void SCH_EDIT_FRAME::OnRotate( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
// Allows block rotate operation on hot key.
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
screen->m_BlockLocate.SetCommand( BLOCK_ROTATE );
HandleBlockEnd( &dc );
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::RotatableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
if( aEvent.GetId() == ID_SCH_ROTATE_CLOCKWISE )
OrientComponent( CMP_ROTATE_CLOCKWISE );
else if( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE )
OrientComponent( CMP_ROTATE_COUNTERCLOCKWISE );
else
wxFAIL_MSG( wxT( "Unknown rotate item command ID." ) );
break;
case SCH_TEXT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
m_canvas->MoveCursorToCrossHair();
ChangeTextOrient( (SCH_TEXT*) item, &dc );
break;
case SCH_FIELD_T:
m_canvas->MoveCursorToCrossHair();
RotateField( (SCH_FIELD*) item, &dc );
break;
case SCH_BITMAP_T:
RotateImage( (SCH_BITMAP*) item );
break;
case SCH_SHEET_T: /// @todo allow sheet rotate on hotkey
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot rotate schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
void SCH_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
pos = wxGetMousePosition();
pos.y += 20;
// If needed, stop the current command and deselect current tool
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_CANCEL_CURRENT_COMMAND:
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
case ID_POPUP_SCH_BEGIN_WIRE:
case ID_POPUP_SCH_BEGIN_BUS:
case ID_POPUP_END_LINE:
case ID_POPUP_SCH_SET_SHAPE_TEXT:
case ID_POPUP_SCH_CLEANUP_SHEET:
case ID_POPUP_SCH_END_SHEET:
case ID_POPUP_SCH_RESIZE_SHEET:
case ID_POPUP_IMPORT_GLABEL:
case ID_POPUP_SCH_INIT_CMP:
case ID_POPUP_SCH_DISPLAYDOC_CMP:
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_DRAG_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
case ID_POPUP_SCH_ENTER_SHEET:
case ID_POPUP_SCH_LEAVE_SHEET:
case ID_POPUP_SCH_ADD_JUNCTION:
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_GETINFO_MARKER:
/* At this point: Do nothing. these commands do not need to stop the
* current command (mainly a block command) or reset the current state
* They will be executed later, in next switch structure.
*/
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
// Stop the current command (if any) but keep the current tool
m_canvas->EndMouseCapture();
break;
default:
// Stop the current command and deselect the current tool
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
break;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
item = screen->GetCurItem(); // Can be modified by previous calls.
switch( id )
{
case ID_HIERARCHY:
InstallHierarchyFrame( &dc, pos );
SetRepeatItem( NULL );
break;
case wxID_CUT:
if( screen->m_BlockLocate.GetCommand() != BLOCK_MOVE )
break;
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetRepeatItem( NULL );
SetSheetNumberAndCount();
break;
case wxID_PASTE:
HandleBlockBegin( &dc, BLOCK_PASTE, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '/' );
break;
case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
m_canvas->MoveCursorToCrossHair();
SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '\\' );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
SetToolID( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString );
}
else
{
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
case ID_POPUP_END_LINE:
m_canvas->MoveCursorToCrossHair();
EndSegment( &dc );
break;
case ID_POPUP_SCH_BEGIN_WIRE:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_BEGIN_BUS:
m_canvas->MoveCursorToCrossHair();
OnLeftClick( &dc, GetCrossHairPosition() );
break;
case ID_POPUP_SCH_SET_SHAPE_TEXT:
// Not used
break;
case ID_POPUP_SCH_DELETE_NODE:
case ID_POPUP_SCH_DELETE_CONNECTION:
m_canvas->MoveCursorToCrossHair();
DeleteConnection( id == ID_POPUP_SCH_DELETE_CONNECTION );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
m_canvas->Refresh();
break;
case ID_POPUP_SCH_BREAK_WIRE:
{
DLIST< SCH_ITEM > oldWires;
oldWires.SetOwnership( false ); // Prevent DLIST for deleting items in destructor.
m_canvas->MoveCursorToCrossHair();
screen->ExtractWires( oldWires, true );
screen->BreakSegment( GetCrossHairPosition() );
if( oldWires.GetCount() != 0 )
{
PICKED_ITEMS_LIST oldItems;
oldItems.m_Status = UR_WIRE_IMAGE;
while( oldWires.GetCount() != 0 )
{
ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
oldItems.PushItem( picker );
}
SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE );
}
screen->TestDanglingEnds( m_canvas, &dc );
}
break;
case ID_POPUP_SCH_DELETE_CMP:
case ID_POPUP_SCH_DELETE:
if( item == NULL )
break;
DeleteItem( item );
screen->SetCurItem( NULL );
SetRepeatItem( NULL );
screen->TestDanglingEnds( m_canvas, &dc );
SetSheetNumberAndCount();
OnModify();
break;
case ID_POPUP_SCH_END_SHEET:
m_canvas->MoveCursorToCrossHair();
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_RESIZE_SHEET:
ReSizeSheet( (SCH_SHEET*) item, &dc );
screen->TestDanglingEnds( m_canvas, &dc );
break;
case ID_POPUP_IMPORT_GLABEL:
if( item != NULL && item->Type() == SCH_SHEET_T )
screen->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, &dc ) );
break;
case ID_POPUP_SCH_CLEANUP_SHEET:
if( item != NULL && item->Type() == SCH_SHEET_T )
{
SCH_SHEET* sheet = (SCH_SHEET*) item;
if( !sheet->HasUndefinedPins() )
{
DisplayInfoMessage( this,
_( "There are no undefined labels in this sheet to clean up." ) );
return;
}
if( !IsOK( this, _( "Do you wish to cleanup this sheet?" ) ) )
return;
/* Save sheet in undo list before cleaning up unreferenced hierarchical labels. */
SaveCopyInUndoList( sheet, UR_CHANGED );
sheet->CleanupSheet();
OnModify();
m_canvas->RefreshDrawingRect( sheet->GetBoundingBox() );
}
break;
case ID_POPUP_SCH_INIT_CMP:
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_SCH_EDIT_CONVERT_CMP:
// Ensure the struct is a component (could be a struct of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
m_canvas->MoveCursorToCrossHair();
ConvertPart( (SCH_COMPONENT*) item, &dc );
}
break;
case ID_POPUP_SCH_DISPLAYDOC_CMP:
// Ensure the struct is a component (could be a piece of a component, like Field, text..)
if( item && item->Type() == SCH_COMPONENT_T )
{
LIB_ALIAS* LibEntry;
LibEntry = CMP_LIBRARY::FindLibraryEntry( ( (SCH_COMPONENT*) item )->GetLibName() );
if( LibEntry && LibEntry->GetDocFileName() != wxEmptyString )
{
GetAssociatedDocument( this, LibEntry->GetDocFileName(),
&wxGetApp().GetLibraryPathList() );
}
}
break;
case ID_POPUP_SCH_ENTER_SHEET:
if( item && (item->Type() == SCH_SHEET_T) )
{
m_CurrentSheet->Push( (SCH_SHEET*) item );
DisplayCurrentSheet();
}
break;
case ID_POPUP_SCH_LEAVE_SHEET:
m_CurrentSheet->Pop();
DisplayCurrentSheet();
break;
case wxID_COPY: // really this is a Save block for paste
screen->m_BlockLocate.SetCommand( BLOCK_SAVE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_PLACE_BLOCK:
m_canvas->SetAutoPanRequest( false );
m_canvas->MoveCursorToCrossHair();
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
screen->m_BlockLocate.SetCommand( BLOCK_ZOOM );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
SetSheetNumberAndCount();
break;
case ID_POPUP_COPY_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_COPY );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DRAG_BLOCK:
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetCommand( BLOCK_DRAG );
screen->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_SCH_ADD_JUNCTION:
m_canvas->MoveCursorToCrossHair();
screen->SetCurItem( AddJunction( &dc, GetCrossHairPosition(), true ) );
screen->TestDanglingEnds( m_canvas, &dc );
screen->SetCurItem( NULL );
break;
case ID_POPUP_SCH_ADD_LABEL:
case ID_POPUP_SCH_ADD_GLABEL:
screen->SetCurItem( CreateNewText( &dc, id == ID_POPUP_SCH_ADD_LABEL ?
LAYER_LOCLABEL : LAYER_GLOBLABEL ) );
item = screen->GetCurItem();
if( item )
addCurrentItemToList( &dc );
break;
case ID_POPUP_SCH_GETINFO_MARKER:
if( item && item->Type() == SCH_MARKER_T )
( (SCH_MARKER*) item )->DisplayMarkerInfo( this );
break;
default: // Log error:
wxFAIL_MSG( wxString::Format( wxT( "Cannot process command event ID %d" ),
event.GetId() ) );
break;
}
// End switch ( id ) (Command execution)
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetRepeatItem( NULL );
}
bool PCB_EDIT_FRAME::AppendBoardFile( const wxString& aFullFileName, int aCtl )
{
IO_MGR::PCB_FILE_T pluginType = plugin_type( aFullFileName, aCtl );
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
// keep trace of existing items, in order to know what are the new items
// (for undo command for instance)
// Tracks are inserted, not append, so mark existing tracks to know what are
// the new tracks
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
track->SetFlags( FLAG0 );
// Other items are append to the item list, so keep trace to the
// last existing item is enough
MODULE* module = GetBoard()->m_Modules.GetLast();
BOARD_ITEM* drawing = GetBoard()->m_Drawings.GetLast();
int zonescount = GetBoard()->GetAreaCount();
// Keep also the count of copper layers, because we can happen boards
// with different copper layers counts,
// and the enabled layers
int initialCopperLayerCount = GetBoard()->GetCopperLayerCount();
LSET initialEnabledLayers = GetBoard()->GetEnabledLayers();
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
GetDesignSettings().m_NetClasses.Clear();
pi->Load( aFullFileName, GetBoard(), &props );
}
catch( const IO_ERROR& ioe )
{
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
track->ClearFlags( FLAG0 );
wxString msg = wxString::Format( _(
"Error loading board.\n%s" ),
GetChars( ioe.What() )
);
DisplayError( this, msg );
return false;
}
// Now prepare a block move command to place the new items, and
// prepare the undo command.
BLOCK_SELECTOR& blockmove = GetScreen()->m_BlockLocate;
HandleBlockBegin( NULL, BLOCK_PRESELECT_MOVE, wxPoint( 0, 0) );
PICKED_ITEMS_LIST& blockitemsList = blockmove.GetItems();
PICKED_ITEMS_LIST undoListPicker;
ITEM_PICKER picker( NULL, UR_NEW );
EDA_RECT bbox; // the new items bounding box, for block move
bool bboxInit = true; // true until the bounding box is initialized
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
{
if( track->GetFlags() & FLAG0 )
{
track->ClearFlags( FLAG0 );
continue;
}
track->SetFlags( IS_MOVED );
picker.SetItem( track );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = track->GetBoundingBox();
else
bbox.Merge( track->GetBoundingBox() );
bboxInit = false;
}
if( module )
module = module->Next();
else
module = GetBoard()->m_Modules;
for( ; module; module = module->Next() )
{
module->SetFlags( IS_MOVED );
picker.SetItem( module );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = module->GetBoundingBox();
else
bbox.Merge( module->GetBoundingBox() );
bboxInit = false;
}
if( drawing )
drawing = drawing->Next();
else
drawing = GetBoard()->m_Drawings;
for( ; drawing; drawing = drawing->Next() )
{
drawing->SetFlags( IS_MOVED );
picker.SetItem( drawing );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = drawing->GetBoundingBox();
else
bbox.Merge( drawing->GetBoundingBox() );
bboxInit = false;
}
for( ZONE_CONTAINER* zone = GetBoard()->GetArea( zonescount ); zone;
zone = GetBoard()->GetArea( zonescount ) )
{
zone->SetFlags( IS_MOVED );
picker.SetItem( zone );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
zonescount++;
if( bboxInit )
bbox = zone->GetBoundingBox();
else
bbox.Merge( zone->GetBoundingBox() );
bboxInit = false;
}
SaveCopyInUndoList( undoListPicker, UR_NEW );
// we should not ask PLUGINs to do these items:
int copperLayerCount = GetBoard()->GetCopperLayerCount();
if( copperLayerCount > initialCopperLayerCount )
GetBoard()->SetCopperLayerCount( copperLayerCount );
// Enable all used layers, and make them visible:
LSET enabledLayers = GetBoard()->GetEnabledLayers();
enabledLayers |= initialEnabledLayers;
GetBoard()->SetEnabledLayers( enabledLayers );
GetBoard()->SetVisibleLayers( enabledLayers );
ReCreateLayerBox();
ReFillLayerWidget();
if( IsGalCanvasActive() )
static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() )->SyncLayersVisibility( GetBoard() );
GetBoard()->BuildListOfNets();
GetBoard()->SynchronizeNetsAndNetClasses();
SetStatusText( wxEmptyString );
BestZoom();
// Finish block move command:
wxPoint cpos = GetNearestGridPosition( bbox.Centre() );
blockmove.SetOrigin( bbox.GetOrigin() );
blockmove.SetSize( bbox.GetSize() );
blockmove.SetLastCursorPosition( cpos );
HandleBlockEnd( NULL );
return true;
}
void LIB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
m_canvas->SetIgnoreMouseEvents( true );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id ) // Stop placement commands before handling new command.
{
case ID_POPUP_LIBEDIT_END_CREATE_ITEM:
case ID_LIBEDIT_EDIT_PIN:
case ID_POPUP_LIBEDIT_BODY_EDIT_ITEM:
case ID_POPUP_LIBEDIT_FIELD_EDIT_ITEM:
case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINSIZE_ITEM:
case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINNAMESIZE_ITEM:
case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINNUMSIZE_ITEM:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_SELECT_ITEMS_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_MIRROR_Y_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_LIBEDIT_DELETE_CURRENT_POLY_SEGMENT:
break;
case ID_POPUP_LIBEDIT_CANCEL_EDITING:
if( m_canvas->IsMouseCaptured() )
m_canvas->EndMouseCapture();
else
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
break;
case ID_POPUP_LIBEDIT_DELETE_ITEM:
m_canvas->EndMouseCapture();
break;
default:
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(),
wxEmptyString );
break;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
switch( id )
{
case ID_POPUP_LIBEDIT_CANCEL_EDITING:
break;
case ID_LIBEDIT_SELECT_CURRENT_LIB:
SelectActiveLibrary();
break;
case ID_LIBEDIT_SAVE_CURRENT_PART:
{
LIB_PART* part = GetCurPart();
if( !part )
{
DisplayError( this, _( "No part to save." ) );
break;
}
PART_LIB* lib = GetCurLib();
if( !lib )
SelectActiveLibrary();
lib = GetCurLib();
if( !lib )
{
DisplayError( this, _( "No library specified." ) );
break;
}
SaveOnePart( lib );
}
break;
case ID_LIBEDIT_EDIT_PIN_BY_PIN:
m_editPinsPerPartOrConvert = m_mainToolBar->GetToolToggled( ID_LIBEDIT_EDIT_PIN_BY_PIN );
break;
case ID_POPUP_LIBEDIT_END_CREATE_ITEM:
m_canvas->MoveCursorToCrossHair();
if( m_drawItem )
{
EndDrawGraphicItem( &dc );
}
break;
case ID_POPUP_LIBEDIT_BODY_EDIT_ITEM:
if( m_drawItem )
{
m_canvas->CrossHairOff( &dc );
switch( m_drawItem->Type() )
{
case LIB_ARC_T:
case LIB_CIRCLE_T:
case LIB_RECTANGLE_T:
case LIB_POLYLINE_T:
EditGraphicSymbol( &dc, m_drawItem );
break;
case LIB_TEXT_T:
EditSymbolText( &dc, m_drawItem );
break;
default:
;
}
m_canvas->CrossHairOn( &dc );
}
break;
case ID_POPUP_LIBEDIT_DELETE_CURRENT_POLY_SEGMENT:
{
// Delete the last created segment, while creating a polyline draw item
if( m_drawItem == NULL )
break;
m_canvas->MoveCursorToCrossHair();
STATUS_FLAGS oldFlags = m_drawItem->GetFlags();
m_drawItem->ClearFlags();
m_drawItem->Draw( m_canvas, &dc, wxPoint( 0, 0 ), UNSPECIFIED_COLOR, g_XorMode, NULL,
DefaultTransform );
( (LIB_POLYLINE*) m_drawItem )->DeleteSegment( GetCrossHairPosition( true ) );
m_drawItem->Draw( m_canvas, &dc, wxPoint( 0, 0 ), UNSPECIFIED_COLOR, g_XorMode, NULL,
DefaultTransform );
m_drawItem->SetFlags( oldFlags );
m_lastDrawItem = NULL;
}
break;
case ID_POPUP_LIBEDIT_DELETE_ITEM:
if( m_drawItem )
deleteItem( &dc );
break;
case ID_POPUP_LIBEDIT_MOVE_ITEM_REQUEST:
if( m_drawItem == NULL )
break;
if( m_drawItem->Type() == LIB_PIN_T )
StartMovePin( &dc );
else
StartMoveDrawSymbol( &dc );
break;
case ID_POPUP_LIBEDIT_MODIFY_ITEM:
if( m_drawItem == NULL )
break;
m_canvas->MoveCursorToCrossHair();
if( m_drawItem->Type() == LIB_RECTANGLE_T
|| m_drawItem->Type() == LIB_CIRCLE_T
|| m_drawItem->Type() == LIB_POLYLINE_T
|| m_drawItem->Type() == LIB_ARC_T
)
{
StartModifyDrawSymbol( &dc );
}
break;
case ID_POPUP_LIBEDIT_FIELD_EDIT_ITEM:
if( m_drawItem == NULL )
break;
m_canvas->CrossHairOff( &dc );
if( m_drawItem->Type() == LIB_FIELD_T )
{
EditField( (LIB_FIELD*) m_drawItem );
}
m_canvas->MoveCursorToCrossHair();
m_canvas->CrossHairOn( &dc );
break;
case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINSIZE_ITEM:
case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINNAMESIZE_ITEM:
case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINNUMSIZE_ITEM:
{
if( !m_drawItem || m_drawItem->Type() != LIB_PIN_T )
break;
LIB_PART* part = GetCurPart();
SaveCopyInUndoList( part );
GlobalSetPins( (LIB_PIN*) m_drawItem, id );
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
}
break;
case ID_POPUP_ZOOM_BLOCK:
m_canvas->SetAutoPanRequest( false );
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
m_canvas->SetAutoPanRequest( false );
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
m_canvas->MoveCursorToCrossHair();
HandleBlockEnd( &dc );
break;
case ID_POPUP_COPY_BLOCK:
m_canvas->SetAutoPanRequest( false );
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
m_canvas->MoveCursorToCrossHair();
HandleBlockEnd( &dc );
break;
case ID_POPUP_SELECT_ITEMS_BLOCK:
m_canvas->SetAutoPanRequest( false );
GetScreen()->m_BlockLocate.SetCommand( BLOCK_SELECT_ITEMS_ONLY );
m_canvas->MoveCursorToCrossHair();
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_Y_BLOCK:
m_canvas->SetAutoPanRequest( false );
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_Y );
m_canvas->MoveCursorToCrossHair();
HandleBlockPlace( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
m_canvas->SetAutoPanRequest( false );
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
m_canvas->MoveCursorToCrossHair();
HandleBlockPlace( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
m_canvas->SetAutoPanRequest( false );
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
m_canvas->MoveCursorToCrossHair();
HandleBlockPlace( &dc );
break;
case ID_POPUP_PLACE_BLOCK:
m_canvas->SetAutoPanRequest( false );
m_canvas->MoveCursorToCrossHair();
HandleBlockPlace( &dc );
break;
default:
DisplayError( this, wxT( "LIB_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
m_canvas->SetIgnoreMouseEvents( false );
if( GetToolId() == ID_NO_TOOL_SELECTED )
m_lastDrawItem = NULL;
}
void WinEDA_PcbFrame::Process_Special_Functions(wxCommandEvent& event)
/*********************************************************************/
/* Traite les selections d'outils et les commandes appelees du menu POPUP
*/
{
int id = event.GetId();
wxPoint pos;
wxClientDC dc(DrawPanel);
int itmp;
DrawPanel->PrepareGraphicContext(&dc);
wxGetMousePosition(&pos.x, &pos.y);
pos.y += 20;
switch ( id ) // Arret eventuel de la commande de déplacement en cours
{
case wxID_CUT:
case wxID_COPY:
case ID_AUX_TOOLBAR_PCB_TRACK_WIDTH:
case ID_AUX_TOOLBAR_PCB_VIA_SIZE:
case ID_ON_GRID_SELECT:
case ID_ON_ZOOM_SELECT:
case ID_PCB_USER_GRID_SETUP:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_EDIT_MIRE:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
case ID_POPUP_PCB_EDIT_MODULE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_PCB_END_TRACK:
case ID_POPUP_PCB_PLACE_VIA:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_ZONE_LIMIT:
case ID_POPUP_PCB_EDIT_ZONE:
case ID_POPUP_PCB_DELETE_ZONE:
case ID_POPUP_PCB_DELETE_TRACKSEG:
case ID_POPUP_PCB_DELETE_TRACK:
case ID_POPUP_PCB_DELETE_TRACKNET:
case ID_POPUP_PCB_FILL_ZONE:
case ID_POPUP_PCB_SELECT_NET_ZONE:
case ID_POPUP_PCB_SELECT_LAYER:
case ID_POPUP_PCB_SELECT_CU_LAYER:
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
case ID_POPUP_PCB_SELECT_WIDTH:
case ID_POPUP_PCB_SELECT_WIDTH1:
case ID_POPUP_PCB_SELECT_WIDTH2:
case ID_POPUP_PCB_SELECT_WIDTH3:
case ID_POPUP_PCB_SELECT_WIDTH4:
case ID_POPUP_PCB_SELECT_WIDTH5:
case ID_POPUP_PCB_SELECT_WIDTH6:
case ID_POPUP_PCB_SELECT_WIDTH7:
case ID_POPUP_PCB_SELECT_WIDTH8:
case ID_POPUP_PCB_SELECT_VIASIZE:
case ID_POPUP_PCB_SELECT_VIASIZE1:
case ID_POPUP_PCB_SELECT_VIASIZE2:
case ID_POPUP_PCB_SELECT_VIASIZE3:
case ID_POPUP_PCB_SELECT_VIASIZE4:
case ID_POPUP_PCB_SELECT_VIASIZE5:
case ID_POPUP_PCB_SELECT_VIASIZE6:
case ID_POPUP_PCB_SELECT_VIASIZE7:
case ID_POPUP_PCB_SELECT_VIASIZE8:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
case ID_POPUP_PCB_BREAK_TRACK:
case ID_POPUP_PCB_EDIT_NET:
case ID_POPUP_PCB_EDIT_TRACK:
case ID_POPUP_PCB_EDIT_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACK:
case ID_POPUP_PCB_LOCK_OFF_TRACK:
case ID_POPUP_PCB_LOCK_ON_NET:
case ID_POPUP_PCB_LOCK_OFF_NET:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_INVERT_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_PCB_VIA_EDITING:
case ID_POPUP_PCB_VIA_HOLE_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_TO_VALUE:
case ID_POPUP_PCB_VIA_HOLE_ENTER_VALUE:
case ID_POPUP_PCB_VIA_HOLE_EXPORT:
case ID_POPUP_PCB_VIA_HOLE_RESET_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_EXPORT_TO_OTHERS:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
/* ne devrait pas etre execute, sauf bug */
if (m_CurrentScreen->BlockLocate.m_Command != BLOCK_IDLE)
{
m_CurrentScreen->BlockLocate.m_Command = BLOCK_IDLE;
m_CurrentScreen->BlockLocate.m_State = STATE_NO_BLOCK;
m_CurrentScreen->BlockLocate.m_BlockDrawStruct = NULL;
}
if (m_ID_current_state == 0 )
SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
else SetCursor(DrawPanel->m_PanelCursor = DrawPanel->m_PanelDefaultCursor);
break;
default: // Arret de la commande de déplacement en cours
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
break;
}
switch ( id ) // Traitement des commandes
{
case ID_EXIT :
Close(TRUE);
break;
case ID_OPEN_MODULE_EDITOR:
if (m_Parent->m_ModuleEditFrame == NULL )
{
m_Parent->m_ModuleEditFrame = new WinEDA_ModuleEditFrame(this,
m_Parent,_("Module Editor"),
wxPoint(-1, -1), wxSize(600,400) );
m_Parent->m_ModuleEditFrame->Show(TRUE);
m_Parent->m_ModuleEditFrame->Zoom_Automatique(TRUE);
}
else m_Parent->m_ModuleEditFrame->Iconize(FALSE);
break;
case ID_NEW_PROJECT:
case ID_LOAD_PROJECT:
Files_io(event);
break;
case ID_PCB_GLOBAL_DELETE:
InstallPcbGlobalDeleteFrame(pos);
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_MOVE;
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockPlace(&dc);
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_COPY;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockPlace(&dc);
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_ZOOM;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_DELETE;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_ROTATE;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_INVERT_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_INVERT;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_UNDO_BUTT:
UnDeleteItem(&dc);
break;
case ID_DRC_CONTROL:
Install_Test_DRC_Frame(&dc);
break;
case ID_GET_NETLIST:
InstallNetlistFrame(&dc, wxPoint(-1,-1));
break;
case ID_GET_TOOLS:
// InstallToolsFrame(this, wxPoint(-1,-1) );
break;
case ID_FIND_ITEMS:
InstallFindFrame(pos, &dc);
break;
case ID_TRACK_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Tracks"));
DisplayTrackSettings();
if ( (m_Pcb->m_Status_Pcb & LISTE_CHEVELU_OK) == 0)
{
Compile_Ratsnest( &dc, TRUE );
}
break;
case ID_PCB_ZONES_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Zones"));
if ( ! DisplayOpt.DisplayZones )
DisplayInfo(this, _("Warning: Display Zone is OFF!!!") );
DelLimitesZone(&dc, TRUE);
if( ! g_HightLigt_Status && (g_HightLigth_NetCode > 0 ) )
Hight_Light(&dc);
break;
case ID_PCB_MIRE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Mire"));
break;
case ID_PCB_PLACE_OFFSET_COORD_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Adjust Zero"));
break;
case ID_LINE_COMMENT_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_CIRCLE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Graphic"));
break;
case ID_TEXT_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Text"));
break;
case ID_COMPONENT_BUTT:
SetToolID( id, wxCURSOR_HAND, _("Add Modules"));
break;
case ID_PCB_COTATION_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Cotation"));
break;
case ID_NO_SELECT_BUTT:
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
case ID_PCB_HIGHLIGHT_BUTT:
SetToolID( id, wxCURSOR_HAND, _("Net Highlight"));
break;
case ID_PCB_SHOW_1_RATSNEST_BUTT:
SetToolID( id, wxCURSOR_HAND, _("Local Ratsnest"));
if ( (m_Pcb->m_Status_Pcb & LISTE_CHEVELU_OK) == 0)
Compile_Ratsnest( &dc, TRUE );
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_END_LINE:
DrawPanel->MouseToCursorSchema();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_EDIT_TRACK:
if ( CURRENT_ITEM == NULL) break;
Edit_Track_Width(&dc, (TRACK *) CURRENT_ITEM);
DrawPanel->MouseToCursorSchema();
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_EDIT_TRACKSEG:
if ( CURRENT_ITEM == NULL) break;
Edit_TrackSegm_Width(&dc, (TRACK *) CURRENT_ITEM);
DrawPanel->MouseToCursorSchema();
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_EDIT_NET:
if ( CURRENT_ITEM == NULL) break;
Edit_Net_Width(&dc, ((TRACK *) CURRENT_ITEM)->m_NetCode);
DrawPanel->MouseToCursorSchema();
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE:
case ID_POPUP_PCB_EDIT_ALL_VIAS_SIZE:
case ID_POPUP_PCB_EDIT_ALL_TRACK_SIZE:
if ( CURRENT_ITEM == NULL) break;
{
bool resize_vias = TRUE, resize_track = TRUE;
if( id == ID_POPUP_PCB_EDIT_ALL_VIAS_SIZE) resize_track = FALSE;
if( id == ID_POPUP_PCB_EDIT_ALL_TRACK_SIZE) resize_vias = FALSE;
if ( Resize_Pistes_Vias(&dc, resize_track, resize_vias)) GetScreen()->SetModify();
}
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_END_TRACK:
DrawPanel->MouseToCursorSchema();
End_Route( (TRACK *) CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM->m_Flags & IS_DRAGGED )
{
PlaceDraggedTrackSegment((TRACK *) CURRENT_ITEM, &dc);
}
break;
case ID_POPUP_PCB_PLACE_VIA:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM->m_Flags & IS_DRAGGED )
{
PlaceDraggedTrackSegment((TRACK *) CURRENT_ITEM, &dc);
}
else
{
Other_Layer_Route( (TRACK *) CURRENT_ITEM, &dc);
if ( DisplayOpt.ContrastModeDisplay )
GetScreen()->SetRefreshReq();
}
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
DrawPanel->MouseToCursorSchema();
GetScreen()->m_CurrentItem = Delete_Segment(&dc, (TRACK*)CURRENT_ITEM);
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_DELETE_TRACK:
DrawPanel->MouseToCursorSchema();
Delete_Track(&dc, (TRACK*)CURRENT_ITEM);
GetScreen()->m_CurrentItem = NULL;
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_DELETE_TRACKNET:
DrawPanel->MouseToCursorSchema();
Delete_net(&dc, (TRACK*)CURRENT_ITEM);
GetScreen()->m_CurrentItem = NULL;
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
Attribut_Segment((TRACK*)CURRENT_ITEM, &dc, TRUE);
break;
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
Attribut_Segment((TRACK*)CURRENT_ITEM, &dc, FALSE);
break;
case ID_POPUP_PCB_LOCK_ON_TRACK:
Attribut_Track((TRACK*)CURRENT_ITEM, &dc, TRUE);
break;
case ID_POPUP_PCB_LOCK_OFF_TRACK:
Attribut_Track((TRACK*)CURRENT_ITEM, &dc, FALSE);
break;
case ID_POPUP_PCB_LOCK_ON_NET:
Attribut_net(&dc, ((TRACK*)CURRENT_ITEM)->m_NetCode, TRUE);
break;
case ID_POPUP_PCB_LOCK_OFF_NET:
Attribut_net(&dc, ((TRACK*)CURRENT_ITEM)->m_NetCode, FALSE);
break;
case ID_POPUP_PCB_SETFLAGS_TRACK_MNU:
break;
case ID_POPUP_PCB_DELETE_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM == NULL) break;
Delete_Zone(&dc, (SEGZONE*)CURRENT_ITEM);
GetScreen()->m_CurrentItem = NULL;
break;
case ID_POPUP_PCB_EDIT_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM == NULL) break;
Edit_Zone_Width(&dc, (SEGZONE*)CURRENT_ITEM);
break;
case ID_POPUP_PCB_DELETE_ZONE_LIMIT:
DrawPanel->MouseToCursorSchema();
DelLimitesZone(&dc, TRUE);
break;
case ID_PCB_DELETE_ITEM_BUTT:
SetToolID( id, wxCURSOR_BULLSEYE, _("Delete item"));
break;
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
Process_Move_Item(this, CURRENT_ITEM, &dc);
DrawPanel->m_AutoPAN_Request = TRUE;
break;
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
g_Drag_Pistes_On = TRUE;
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
{
g_Drag_Pistes_On = FALSE;
break;
}
DrawPanel->MouseToCursorSchema();
StartMove_Module( (MODULE*)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_DELETE_MODULE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
if ( Delete_Module((MODULE*) CURRENT_ITEM, &dc) )
{
GetScreen()->m_CurrentItem = NULL;
}
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
Rotate_Module(&dc, (MODULE*)CURRENT_ITEM, -900, TRUE);
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
Rotate_Module(&dc, (MODULE*)CURRENT_ITEM, 900, TRUE);
break;
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
Change_Side_Module((MODULE *) CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_EDIT_MODULE:
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
InstallModuleOptionsFrame((MODULE *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DRAG_PAD_REQUEST:
g_Drag_Pistes_On = TRUE;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
DrawPanel->MouseToCursorSchema();
StartMovePad((D_PAD *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame((D_PAD *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
DrawPanel->MouseToCursorSchema();
Import_Pad_Settings((D_PAD *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
DrawPanel->MouseToCursorSchema();
Global_Import_Pad_Settings((D_PAD *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
DrawPanel->MouseToCursorSchema();
Export_Pad_Settings((D_PAD *)CURRENT_ITEM);
break;
case ID_POPUP_PCB_DELETE_PAD:
DeletePad((D_PAD *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame((TEXTE_MODULE *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
DrawPanel->MouseToCursorSchema();
StartMoveTexteModule( (TEXTE_MODULE *) CURRENT_ITEM,
&dc);
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule((TEXTE_MODULE *)CURRENT_ITEM,
&dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
DeleteTextModule((TEXTE_MODULE *)CURRENT_ITEM,
&dc);
GetScreen()->m_CurrentItem = NULL;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_SELECT_LAYER:
itmp = SelectLayer(GetScreen()->m_Active_Layer, -1, -1);
if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
itmp = SelectLayer(GetScreen()->m_Active_Layer, CMP_N+1, -1);
if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_SELECT_CU_LAYER:
itmp = SelectLayer(GetScreen()->m_Active_Layer, -1, CMP_N);
if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
break;
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
SelectLayerPair();
DrawPanel->MouseToCursorSchema();
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
itmp = m_SelLayerBox->GetChoice();
GetScreen()->m_Active_Layer = (int)((size_t) m_SelLayerBox->GetClientData(itmp));
if ( DisplayOpt.ContrastModeDisplay ) DrawPanel->Refresh(TRUE);
break;
case ID_POPUP_PCB_EDIT_TEXTEPCB:
InstallTextPCBOptionsFrame((TEXTE_PCB *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
Rotate_Texte_Pcb((TEXTE_PCB *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_TEXTEPCB:
Delete_Texte_Pcb((TEXTE_PCB *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
StartMove_Mire((MIREPCB *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_EDIT_MIRE:
InstallMireOptionsFrame((MIREPCB *)CURRENT_ITEM, &dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_MIRE:
DrawPanel->MouseToCursorSchema();
Delete_Mire((MIREPCB *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
break;
case ID_POPUP_PCB_DELETE_COTATION:
DrawPanel->MouseToCursorSchema();
Delete_Cotation((COTATION*)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
break;
case ID_POPUP_PCB_EDIT_COTATION:
Install_Edit_Cotation((COTATION*)CURRENT_ITEM, &dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_DRAWING:
Delete_Segment_Edge((DRAWSEGMENT *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_DRAWING_LAYER:
Delete_Drawings_All_Layer((DRAWSEGMENT *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_EDIT_DRAWING:
Drawing_SetNewWidth((DRAWSEGMENT *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_MOVE_DRAWING_REQUEST:
DrawPanel->MouseToCursorSchema();
Start_Move_DrawItem((DRAWSEGMENT *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
{
End_Edge( (DRAWSEGMENT *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
}
break;
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
{
End_Zone(&dc);
GetScreen()->m_CurrentItem = NULL;
}
break;
case ID_POPUP_PCB_DELETE_EDGE_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
{
GetScreen()->m_CurrentItem = Del_SegmEdgeZone(&dc,
(EDGE_ZONE *) CURRENT_ITEM);
}
break;
case ID_POPUP_PCB_FILL_ZONE:
DrawPanel->MouseToCursorSchema();
Fill_Zone(&dc);
break;
case ID_POPUP_PCB_SELECT_NET_ZONE:
DrawPanel->MouseToCursorSchema();
CaptureNetName(&dc);
break;
case ID_POPUP_PCB_SELECT_WIDTH:
break;
case ID_AUX_TOOLBAR_PCB_TRACK_WIDTH:
{
int ii = m_SelTrackWidthBox->GetChoice();
g_DesignSettings.m_CurrentTrackWidth = g_DesignSettings.m_TrackWidhtHistory[ii];
DisplayTrackSettings();
m_SelTrackWidthBox_Changed = FALSE;
m_SelViaSizeBox_Changed = FALSE;
}
break;
case ID_POPUP_PCB_SELECT_WIDTH1:
case ID_POPUP_PCB_SELECT_WIDTH2:
case ID_POPUP_PCB_SELECT_WIDTH3:
case ID_POPUP_PCB_SELECT_WIDTH4:
case ID_POPUP_PCB_SELECT_WIDTH5:
case ID_POPUP_PCB_SELECT_WIDTH6:
case ID_POPUP_PCB_SELECT_WIDTH7:
case ID_POPUP_PCB_SELECT_WIDTH8:
DrawPanel->MouseToCursorSchema();
{
int ii = id - ID_POPUP_PCB_SELECT_WIDTH1;
g_DesignSettings.m_CurrentTrackWidth = g_DesignSettings.m_TrackWidhtHistory[ii];
DisplayTrackSettings();
}
break;
case ID_POPUP_PCB_SELECT_VIASIZE:
break;
case ID_AUX_TOOLBAR_PCB_VIA_SIZE:
{
int ii = m_SelViaSizeBox->GetChoice();
g_DesignSettings.m_CurrentViaSize = g_DesignSettings.m_ViaSizeHistory[ii];
DisplayTrackSettings();
m_SelTrackWidthBox_Changed = FALSE;
m_SelViaSizeBox_Changed = FALSE;
}
break;
case ID_POPUP_PCB_SELECT_VIASIZE1:
case ID_POPUP_PCB_SELECT_VIASIZE2:
case ID_POPUP_PCB_SELECT_VIASIZE3:
case ID_POPUP_PCB_SELECT_VIASIZE4:
case ID_POPUP_PCB_SELECT_VIASIZE5:
case ID_POPUP_PCB_SELECT_VIASIZE6:
case ID_POPUP_PCB_SELECT_VIASIZE7:
case ID_POPUP_PCB_SELECT_VIASIZE8:
case ID_POPUP_PCB_VIA_EDITING:
case ID_POPUP_PCB_VIA_HOLE_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_TO_VALUE:
case ID_POPUP_PCB_VIA_HOLE_ENTER_VALUE:
case ID_POPUP_PCB_VIA_HOLE_EXPORT:
case ID_POPUP_PCB_VIA_HOLE_RESET_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_EXPORT_TO_OTHERS:
Via_Edit_Control(&dc, id, (SEGVIA *) GetScreen()->m_CurrentItem);
break;
case ID_POPUP_PCB_MOVE_TRACK_NODE:
DrawPanel->MouseToCursorSchema();
Start_MoveOneTrackSegment((TRACK *) GetScreen()->m_CurrentItem,
&dc, TRUE);
break;
case ID_POPUP_PCB_BREAK_TRACK:
DrawPanel->MouseToCursorSchema();
{
TRACK * track = (TRACK *) GetScreen()->m_CurrentItem;
wxPoint pos = GetScreen()->m_Curseur;
track->Draw(DrawPanel, &dc, GR_XOR);
TRACK * newtrack = CreateLockPoint(&pos.x, &pos.y, track, NULL);
track->Draw(DrawPanel, &dc, GR_XOR);
newtrack->Draw(DrawPanel, &dc, GR_XOR);
}
break;
case ID_MENU_PCB_CLEAN:
Clean_Pcb(&dc);
break;
case ID_MENU_PCB_SWAP_LAYERS:
Swap_Layers(event);
break;
case ID_POPUP_PCB_AUTOROUTE_GET_AUTOROUTER:
GlobalRoute(&dc);
break;
case ID_POPUP_PCB_AUTOROUTE_GET_AUTOROUTER_DATA:
ReadAutoroutedTracks(&dc);
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame(pos);
break;
case ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC:
{
wxString msg = FindKicadHelpPath();
msg += EDA_Appl->m_EDA_CommonConfig->Read(wxT("module_doc_file"),
wxT("pcbnew/footprints.pdf"));
GetAssociatedDocument(this, wxEmptyString, msg);
}
break;
case ID_MENU_ARCHIVE_NEW_MODULES:
Archive_Modules(wxEmptyString, TRUE);
break;
case ID_MENU_ARCHIVE_ALL_MODULES:
Archive_Modules(wxEmptyString, FALSE);
break;
default:
{
DisplayError(this, wxT("WinEDA_PcbFrame::Process_Special_Functions() id error"));
break;
}
}
SetToolbars();
}
/* Handles the selection of tools, menu, and popup menu commands.
*/
void GERBVIEW_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
m_canvas->EndMouseCapture();
if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE )
{
/* Should not be executed, except bug */
GetScreen()->m_BlockLocate.SetCommand( BLOCK_IDLE );
GetScreen()->m_BlockLocate.SetState( STATE_NO_BLOCK );
GetScreen()->m_BlockLocate.ClearItemsList();
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
else
m_canvas->SetCursor( (wxStockCursor) m_canvas->GetCurrentCursor() );
break;
default:
m_canvas->EndMouseCapture();
break;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
switch( id )
{
case ID_GERBVIEW_SET_PAGE_BORDER:
{
DIALOG_PAGE_SHOW_PAGE_BORDERS dlg( this );
if( dlg.ShowModal() == wxID_OK )
m_canvas->Refresh();
}
break;
case ID_GERBVIEW_GLOBAL_DELETE:
Erase_Current_DrawLayer( true );
ClearMsgPanel();
break;
case ID_NO_TOOL_SELECTED:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_GERBVIEW_SHOW_LIST_DCODES:
Liste_D_Codes();
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
wxFAIL_MSG( wxT( "GERBVIEW_FRAME::Process_Special_Functions error" ) );
break;
}
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
{
wxString library = SelectLibrary( GetCurrentLib() );
if( library.size() )
{
Prj().SetRString( PROJECT::PCB_LIB_NICKNAME, library );
updateTitle();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
// On Windows, Raise() does not bring the window on screen, when iconized
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
if( !Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = CreateNewModule( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
updateView();
m_canvas->Refresh();
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
{
if( !IsOK( this,
_( "Current Footprint will be lost and this operation cannot be undone. Continue ?" ) ) )
break;
}
FOOTPRINT_WIZARD_FRAME* wizard = (FOOTPRINT_WIZARD_FRAME*) Kiway().Player(
FRAME_PCB_FOOTPRINT_WIZARD_MODAL, true );
if( wizard->ShowModal( NULL, this ) )
{
// Creates the new footprint from python script wizard
MODULE* module = wizard->GetBuiltFootprint();
if( module == NULL ) // i.e. if create module command aborted
break;
Clear_Pcb( false );
SetCrossHairPosition( wxPoint( 0, 0 ) );
// Add the new object to board
GetBoard()->Add( module, ADD_APPEND );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
module->ClearFlags();
Zoom_Automatique( false );
updateView();
m_canvas->Refresh();
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && GetCurrentLib().size() )
{
SaveFootprintInLibrary( GetCurrentLib(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( pcbframe == NULL ) // happens when the board editor is not active (or closed)
{
wxMessageBox( _("No board currently edited" ) );
break;
}
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->GetLink() ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
m_toolManager->RunAction( COMMON_ACTIONS::selectionClear, true );
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->SetLink( 0 );
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
if( pcbframe->IsGalCanvasActive() )
{
KIGFX::VIEW* view = pcbframe->GetGalCanvas()->GetView();
source_module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
view->Remove( source_module );
}
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->GetLink() );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetCrossHairPosition();
pcbframe->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
newmodule->SetPosition( wxPoint( 0, 0 ) );
pcbframe->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
if( pcbframe->IsGalCanvasActive() )
{
RN_DATA* ratsnest = pcbframe->GetBoard()->GetRatsnest();
ratsnest->Update( newmodule );
ratsnest->Recalculate();
KIGFX::VIEW* view = pcbframe->GetGalCanvas()->GetView();
newmodule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
view->Add( newmodule );
pcbframe->GetGalCanvas()->ForceRefresh();
}
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
m_canvas->Refresh();
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
wxLogDebug( wxT( "Loading module from library " ) + getLibPath() );
if( ! Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
LoadModuleFromLibrary( GetCurrentLib(), Prj().PcbFootprintLibs(), true );
if( GetBoard() && GetBoard()->m_Modules )
{
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
TEXTE_MODULE* ref = &GetBoard()->m_Modules->Reference();
TEXTE_MODULE* val = &GetBoard()->m_Modules->Value();
if( val && ref )
{
ref->SetType( TEXTE_MODULE::TEXT_is_REFERENCE ); // just in case ...
if( ref->GetLength() == 0 )
ref->SetText( wxT( "Ref**" ) );
val->SetType( TEXTE_MODULE::TEXT_is_VALUE ); // just in case ...
if( val->GetLength() == 0 )
val->SetText( wxT( "Val**" ) );
}
}
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
updateView();
m_canvas->Refresh();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
// Currently: not implemented
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetBoard()->m_Modules.GetFirst()->ViewUpdate();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DUPLICATE_ITEM:
duplicateItems( false );
break;
case ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT:
duplicateItems( true );
break;
case ID_POPUP_PCB_MOVE_EXACT:
moveExact();
break;
case ID_POPUP_PCB_CREATE_ARRAY:
createArray();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ) );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( static_cast<EDGE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
case ID_MODEDIT_MODULE_MOVE_EXACT:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
m_canvas->Refresh();
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MOVE_BLOCK_EXACT:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE_EXACT );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_GEN_IMPORT_DXF_FILE:
if( GetBoard()->m_Modules )
{
InvokeDXFDialogModuleImport( this, GetBoard()->m_Modules );
m_canvas->Refresh();
}
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
bool redraw = false;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
Select_Active_Library();
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME * viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer();
if( viewer == NULL )
{
viewer = new FOOTPRINT_VIEWER_FRAME( this, NULL );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = Create_1_Module( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
wxSemaphore semaphore( 0, 1 );
FOOTPRINT_WIZARD_FRAME *wizard = new FOOTPRINT_WIZARD_FRAME( this, &semaphore,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
wizard->Show( true );
wizard->Zoom_Automatique( false );
while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
{
wxYield();
wxMilliSleep( 50 );
}
MODULE* module = wizard->GetBuiltFootprint();
if( module ) // i.e. if create module command not aborted
{
/* Here we should make a copy of the object before adding to board*/
module->SetParent( (EDA_ITEM*)GetBoard() );
GetBoard()->m_Modules.Append( module );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && getLibPath() != wxEmptyString )
{
Save_Module_In_Library( getLibPath(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) GetParent();
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->m_Link ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->m_Link == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->m_Link = 0;
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->m_Link );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetScreen()->GetCrossHairPosition();
pcbframe->GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
pcbframe->GetScreen()->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
redraw = true;
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
{
wxString libPath = getLibPath(); // might be empty
wxLogDebug( wxT( "Loading module from library " ) + libPath );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
Clear_Pcb( true );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Load_Module_From_Library( libPath, true );
redraw = true;
}
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
if( GetBoard() && GetBoard()->m_Modules )
{
TEXTE_MODULE* ref = GetBoard()->m_Modules->m_Reference;
TEXTE_MODULE* val = GetBoard()->m_Modules->m_Value;
if( val && ref )
{
ref->SetType( TEXT_is_REFERENCE ); // just in case ...
if( ref->m_Text.Length() == 0 )
ref->m_Text = L"Ref**";
val->SetType( TEXT_is_VALUE ); // just in case ...
if( val->m_Text.Length() == 0 )
val->m_Text = L"Val**";
}
}
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()-> GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
redraw = true;
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
redraw = true;
break;
case ID_POPUP_PCB_EDIT_MODULE:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( (EDGE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
redraw = true;
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame( pos );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
if( redraw )
m_canvas->Refresh();
}
void SCH_EDIT_FRAME::OnRotate( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
// Allows block rotate operation on hot key.
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
screen->m_BlockLocate.SetCommand( BLOCK_ROTATE );
HandleBlockEnd( &dc );
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::RotatableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
{
SCH_COMPONENT* component = static_cast<SCH_COMPONENT*>( item );
if( aEvent.GetId() == ID_SCH_ROTATE_CLOCKWISE )
OrientComponent( CMP_ROTATE_CLOCKWISE );
else if( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE )
OrientComponent( CMP_ROTATE_COUNTERCLOCKWISE );
else
wxFAIL_MSG( wxT( "Unknown rotate item command ID." ) );
if( m_autoplaceFields )
component->AutoAutoplaceFields( GetScreen() );
m_canvas->Refresh();
break;
}
case SCH_TEXT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
m_canvas->MoveCursorToCrossHair();
ChangeTextOrient( (SCH_TEXT*) item );
m_canvas->Refresh();
break;
case SCH_FIELD_T:
m_canvas->MoveCursorToCrossHair();
RotateField( (SCH_FIELD*) item );
if( item->GetParent()->Type() == SCH_COMPONENT_T )
{
// Now that we're moving a field, they're no longer autoplaced.
SCH_COMPONENT *parent = static_cast<SCH_COMPONENT*>( item->GetParent() );
parent->ClearFieldsAutoplaced();
}
m_canvas->Refresh();
break;
case SCH_BITMAP_T:
RotateImage( (SCH_BITMAP*) item );
break;
case SCH_SHEET_T:
if( !item->IsNew() ) // rotate a sheet during its creation has no sense
{
bool retCCW = ( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE );
RotateHierarchicalSheet( static_cast<SCH_SHEET*>( item ), retCCW );
}
break;
case SCH_JUNCTION_T:
case SCH_NO_CONNECT_T:
// these items are not rotated, because rotation does not change them.
break;
default:
// Other items (wires...) cannot be rotated, at least during creation
if( item->IsNew() )
break;
wxFAIL_MSG( wxString::Format( wxT( "Cannot rotate schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
void SCH_EDIT_FRAME::OnDragItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
// The easiest way to handle a menu or a hot key drag command
// is to simulate a block drag command
//
// When a drag item is requested, some items use a BLOCK_DRAG_ITEM drag type
// an some items use a BLOCK_DRAG drag type (mainly a junction)
// a BLOCK_DRAG collects all items in a block (here a 2x2 rect centered on the cursor)
// and BLOCK_DRAG_ITEM drag only the selected item
BLOCK_COMMAND_T dragType = BLOCK_DRAG_ITEM;
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::DraggableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
// When a junction or a node is found, a BLOCK_DRAG is better
if( m_collectedItems.IsCorner() || m_collectedItems.IsNode( false )
|| m_collectedItems.IsDraggableJunction() )
dragType = BLOCK_DRAG;
}
switch( item->Type() )
{
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LINE_T:
case SCH_JUNCTION_T:
case SCH_COMPONENT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_SHEET_T:
m_canvas->MoveCursorToCrossHair();
if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
{
INSTALL_UNBUFFERED_DC( dc, m_canvas );
if( !HandleBlockBegin( &dc, dragType, GetCrossHairPosition() ) )
break;
// Give a non null size to the search block:
screen->m_BlockLocate.Inflate( 1 );
HandleBlockEnd( &dc );
}
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot drag schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
}
// Handles the selection of command events.
void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
LAYER_NUM itmp;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
MODULE* module;
m_canvas->CrossHairOff( &dc );
switch( id ) // Some (not all ) edit commands must be finished or aborted
{
case wxID_CUT:
case wxID_COPY:
case ID_PCB_USER_GRID_SETUP:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_FLIP_TEXTEPCB:
case ID_POPUP_PCB_COPY_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_EDIT_MIRE:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_PCB_BEGIN_TRACK:
case ID_POPUP_PCB_END_TRACK:
case ID_POPUP_PCB_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_PLACE_MICROVIA:
case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
case ID_POPUP_PCB_FILL_ALL_ZONES:
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES:
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
case ID_POPUP_PCB_PLACE_ZONE_CORNER:
case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
case ID_POPUP_PCB_DELETE_ZONE:
case ID_POPUP_PCB_MOVE_ZONE_CORNER:
case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
case ID_POPUP_PCB_ADD_ZONE_CORNER:
case ID_POPUP_PCB_DELETE_TRACKSEG:
case ID_POPUP_PCB_DELETE_TRACK:
case ID_POPUP_PCB_DELETE_TRACKNET:
case ID_POPUP_PCB_FILL_ZONE:
case ID_POPUP_PCB_SELECT_LAYER:
case ID_POPUP_PCB_SELECT_CU_LAYER:
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
case ID_POPUP_PCB_BREAK_TRACK:
case ID_POPUP_PCB_EDIT_NET:
case ID_POPUP_PCB_EDIT_TRACK:
case ID_POPUP_PCB_EDIT_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACK:
case ID_POPUP_PCB_LOCK_OFF_TRACK:
case ID_POPUP_PCB_LOCK_ON_NET:
case ID_POPUP_PCB_LOCK_OFF_NET:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_FLIP_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_PCB_EDIT_DRAWING:
case ID_POPUP_PCB_GETINFO_MARKER:
case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
}
// Should not be executed, just in case
if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE )
{
GetScreen()->m_BlockLocate.SetCommand( BLOCK_IDLE );
GetScreen()->m_BlockLocate.SetState( STATE_NO_BLOCK );
GetScreen()->m_BlockLocate.ClearItemsList();
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
else
SetCursor( (wxStockCursor) m_canvas->GetDefaultCursor() );
break;
default: // Finish (abort) the command
if( m_canvas->IsMouseCaptured() )
m_canvas->CallEndMouseCapture( &dc );
if( GetToolId() != id )
{
if( m_lastDrawToolId != GetToolId() )
m_lastDrawToolId = GetToolId();
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
}
switch( id ) // Execute command
{
case 0:
break;
case ID_OPEN_MODULE_EDITOR:
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, false );
if( !editor )
{
editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Show( true );
editor->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( editor->IsIconized() )
editor->Iconize( false );
*/
editor->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != editor )
editor->SetFocus();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( viewer->IsIconized() )
viewer->Iconize( false );
*/
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_PCB_GLOBAL_DELETE:
InstallPcbGlobalDeleteFrame( wxDefaultPosition );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_FLIP_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_FLIP );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_DRC_CONTROL:
m_drc->ShowDialog();
break;
case ID_GET_NETLIST:
InstallNetlistFrame( &dc );
break;
case ID_FIND_ITEMS:
InstallFindFrame();
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_END_LINE:
m_canvas->MoveCursorToCrossHair();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_EDIT_TRACK:
if( GetCurItem() == NULL )
break;
Edit_Track_Width( &dc, (TRACK*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
OnModify();
break;
case ID_POPUP_PCB_EDIT_TRACKSEG:
if( GetCurItem() == NULL )
break;
Edit_TrackSegm_Width( &dc, (TRACK*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
OnModify();
break;
case ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE:
if( GetCurItem() == NULL )
break;
{
int type = GetCurItem()->Type();
if( type == PCB_TRACE_T || type == PCB_VIA_T )
{
BOARD_CONNECTED_ITEM*item = (BOARD_CONNECTED_ITEM*) GetCurItem();
DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS dlg( this, item->GetNetCode() );
dlg.ShowModal();
}
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_BEGIN_TRACK:
m_canvas->MoveCursorToCrossHair();
OnHotkeyBeginRoute( &dc );
break;
case ID_POPUP_PCB_END_TRACK:
m_canvas->MoveCursorToCrossHair();
End_Route( (TRACK*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem()->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
}
break;
case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
* If a track is in progress, it will be redrawn
*/
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );
g_Alternate_Track_Posture = !g_Alternate_Track_Posture;
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );
break;
case ID_POPUP_PCB_PLACE_MICROVIA:
if( !IsMicroViaAcceptable() )
break;
// fall through
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem()->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
}
else
{
BOARD_DESIGN_SETTINGS &settings = GetDesignSettings();
VIATYPE_T v_type = settings.m_CurrentViaType;
switch( id )
{
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
settings.m_CurrentViaType = VIA_BLIND_BURIED;
break;
case ID_POPUP_PCB_PLACE_MICROVIA:
settings.m_CurrentViaType = VIA_MICROVIA;
break;
default:
settings.m_CurrentViaType = VIA_THROUGH;
break;
}
// place via and switch layer.
if( id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA ||
id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA )
{
m_canvas->SetIgnoreMouseEvents( true );
wxPoint dlgPosition;
wxGetMousePosition( &dlgPosition.x, &dlgPosition.y );
LAYER_NUM layer = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS,
dlgPosition );
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->MoveCursorToCrossHair();
if( getActiveLayer() != layer )
{
GetScreen()->m_Route_Layer_TOP = getActiveLayer();
GetScreen()->m_Route_Layer_BOTTOM = layer;
Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
}
}
else
Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
settings.m_CurrentViaType = v_type;
if( DisplayOpt.ContrastModeDisplay )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
if( GetCurItem() == NULL )
break;
m_canvas->MoveCursorToCrossHair();
SetCurItem( Delete_Segment( &dc, (TRACK*) GetCurItem() ) );
OnModify();
break;
case ID_POPUP_PCB_DELETE_TRACK:
if( GetCurItem() == NULL )
break;
m_canvas->MoveCursorToCrossHair();
Delete_Track( &dc, (TRACK*) GetCurItem() );
SetCurItem( NULL );
OnModify();
break;
case ID_POPUP_PCB_DELETE_TRACKNET:
m_canvas->MoveCursorToCrossHair();
Delete_net( &dc, (TRACK*) GetCurItem() );
SetCurItem( NULL );
OnModify();
break;
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
Attribut_Segment( (TRACK*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
Attribut_Segment( (TRACK*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_LOCK_ON_TRACK:
Attribut_Track( (TRACK*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_LOCK_OFF_TRACK:
Attribut_Track( (TRACK*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_LOCK_ON_NET:
Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), true );
break;
case ID_POPUP_PCB_LOCK_OFF_NET:
Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), false );
break;
case ID_POPUP_PCB_SETFLAGS_TRACK_MNU:
break;
case ID_POPUP_PCB_DELETE_ZONE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() == NULL )
break;
{
SEGZONE* zsegm = (SEGZONE*) GetCurItem();
int netcode = zsegm->GetNetCode();
Delete_OldZone_Fill( zsegm );
SetCurItem( NULL );
TestNetConnection( NULL, netcode );
OnModify();
SetMsgPanel( GetBoard() );
}
break;
case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
Edit_Zone_Params( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL ); // Outlines can have changed
break;
case ID_POPUP_PCB_ZONE_DUPLICATE:
{
ZONE_CONTAINER* zone = (ZONE_CONTAINER*) GetCurItem();
duplicateZone( &dc, zone );
}
break;
case ID_POPUP_PCB_ZONE_ADD_SIMILAR_ZONE:
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
Add_Similar_Zone( &dc, (ZONE_CONTAINER*) GetCurItem() );
break;
case ID_POPUP_PCB_ZONE_ADD_CUTOUT_ZONE:
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
Add_Zone_Cutout( &dc, (ZONE_CONTAINER*) GetCurItem() );
break;
case ID_POPUP_PCB_DELETE_ZONE_CONTAINER:
case ID_POPUP_PCB_DELETE_ZONE_CUTOUT:
m_canvas->MoveCursorToCrossHair();
{
int netcode = ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode();
Delete_Zone_Contour( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL );
TestNetConnection( NULL, netcode );
SetMsgPanel( GetBoard() );
}
break;
case ID_POPUP_PCB_DELETE_ZONE_CORNER:
Remove_Zone_Corner( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_MOVE_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), false );
break;
}
case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Drag_Outline_Edge( &dc, zone_cont, zone_cont->GetSelectedCorner() );
break;
}
case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Outlines( &dc, zone_cont );
break;
}
case ID_POPUP_PCB_ADD_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
wxPoint pos = GetCrossHairPosition();
/* add corner between zone_cont->m_CornerSelection
* and zone_cont->m_CornerSelection+1
* and start move the new corner
*/
zone_cont->Draw( m_canvas, &dc, GR_XOR );
zone_cont->Outline()->InsertCorner( zone_cont->GetSelectedCorner(), pos.x, pos.y );
zone_cont->SetSelectedCorner( zone_cont->GetSelectedCorner() + 1 );
zone_cont->Draw( m_canvas, &dc, GR_XOR );
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), true );
break;
}
case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
case ID_POPUP_PCB_PLACE_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
End_Move_Zone_Corner_Or_Outlines( &dc, zone_cont );
m_canvas->SetAutoPanRequest( false );
break;
}
case ID_POPUP_PCB_FILL_ALL_ZONES:
m_canvas->MoveCursorToCrossHair();
Fill_All_Zones( this );
m_canvas->Refresh();
SetMsgPanel( GetBoard() );
break;
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
if( ( GetCurItem() )->Type() == PCB_ZONE_AREA_T )
{
ZONE_CONTAINER* zone_container = (ZONE_CONTAINER*) GetCurItem();
zone_container->UnFill();
TestNetConnection( NULL, zone_container->GetNetCode() );
OnModify();
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
}
SetCurItem( NULL );
break;
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES: // Remove all zones :
GetBoard()->m_Zone.DeleteAll(); // remove zone segments used to fill zones.
for( int ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
{
// Remove filled areas in zone
ZONE_CONTAINER* zone_container = GetBoard()->GetArea( ii );
zone_container->ClearFilledPolysList();
}
SetCurItem( NULL ); // CurItem might be deleted by this command, clear the pointer
TestConnections();
TestForActiveLinksInRatsnest( 0 ); // Recalculate the active ratsnest, i.e. the unconnected links
OnModify();
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_FILL_ZONE:
m_canvas->MoveCursorToCrossHair();
Fill_Zone( (ZONE_CONTAINER*) GetCurItem() );
TestNetConnection( NULL, ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode() );
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
StartMoveTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->SetAutoPanRequest( true );
break;
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
if( GetCurItem() == NULL )
break;
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
SendMessageToEESCHEMA( module );
SetCrossHairPosition( module->GetPosition() );
m_canvas->MoveCursorToCrossHair();
StartMoveModule( module, &dc, id == ID_POPUP_PCB_DRAG_MODULE_REQUEST );
break;
case ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST: // get module by name and move it
SetCurItem( GetModuleByName() );
module = (MODULE*) GetCurItem();
if( module == NULL )
break;
if( module->IsLocked() )
{
wxString msg = wxString::Format(
_( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
SendMessageToEESCHEMA( module );
m_canvas->MoveCursorToCrossHair();
StartMoveModule( module, &dc, false );
break;
case ID_POPUP_PCB_DELETE_MODULE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
if( Delete_Module( (MODULE*) GetCurItem(), &dc, true ) )
{
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple rotation, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );
Rotate_Module( &dc, (MODULE*) GetCurItem(), m_rotationAngle, true );
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple rotation, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );
Rotate_Module( &dc, (MODULE*) GetCurItem(), -m_rotationAngle, true );
break;
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple flip, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_FLIPPED, ((MODULE*)GetCurItem())->GetPosition() );
Change_Side_Module( (MODULE*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
InstallModuleOptionsFrame( (MODULE*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
if( GetCurItem()->GetTimeStamp() == 0 ) // Module Editor needs a non null timestamp
{
GetCurItem()->SetTimeStamp( GetNewTimeStamp() );
OnModify();
}
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Load_Module_From_BOARD( (MODULE*)GetCurItem() );
SetCurItem( NULL ); // the current module could be deleted by
editor->Show( true );
editor->Raise(); // Iconize( false );
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DRAG_PAD_REQUEST:
module = (MODULE*) GetCurItem()->GetParent();
if( !module || module->Type() != PCB_MODULE_T )
break;
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "The parent (%s) of the pad is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
module = (MODULE*) GetCurItem()->GetParent();
if( !module || module->Type() != PCB_MODULE_T )
break;
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "The parent (%s) of the pad is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
Import_Pad_Settings( (D_PAD*) GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
DlgGlobalChange_PadSettings( (D_PAD*) GetCurItem(), true );
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetCurItem() );
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
DeletePad( (D_PAD*) GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_RESET_TEXT_SIZE:
ResetTextSize( GetCurItem(), &dc );
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetCurItem(),
&dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
DeleteTextModule( (TEXTE_MODULE*) GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_SELECT_LAYER:
itmp = SelectLayer( getActiveLayer() );
if( itmp >= 0 )
{
// if user changed colors and we are in high contrast mode, then redraw
// because the PAD_SMD pads may change color.
if( DisplayOpt.ContrastModeDisplay && getActiveLayer() != itmp )
{
m_canvas->Refresh();
}
setActiveLayer( itmp );
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
SelectCopperLayerPair();
break;
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
itmp = SelectLayer( getActiveLayer(), ALL_CU_LAYERS );
if( itmp >= 0 )
setActiveLayer( itmp );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_SELECT_CU_LAYER:
itmp = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS );
if( itmp >= 0 )
setActiveLayer( itmp );
break;
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
SelectCopperLayerPair();
m_canvas->MoveCursorToCrossHair();
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
setActiveLayer( m_SelLayerBox->GetLayerSelection() );
if( DisplayOpt.ContrastModeDisplay )
m_canvas->Refresh( true );
break;
case ID_POPUP_PCB_EDIT_TEXTEPCB:
InstallTextPCBOptionsFrame( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
Rotate_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_COPY_TEXTEPCB:
CreateTextePcb( &dc, (TEXTE_PCB*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
break;
case ID_POPUP_PCB_FLIP_TEXTEPCB:
FlipTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTEPCB:
Delete_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
BeginMoveTarget( (PCB_TARGET*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_MIRE:
ShowTargetOptionsDialog( (PCB_TARGET*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_MIRE:
m_canvas->MoveCursorToCrossHair();
DeleteTarget( (PCB_TARGET*) GetCurItem(), &dc );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_DELETE_DIMENSION:
m_canvas->MoveCursorToCrossHair();
DeleteDimension( (DIMENSION*) GetCurItem(), &dc );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_EDIT_DIMENSION:
ShowDimensionPropertyDialog( (DIMENSION*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
BeginMoveDimensionText( (DIMENSION*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_DELETE_DRAWING:
Delete_Segment_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_MARKER:
RemoveStruct( GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_GETINFO_MARKER:
if( GetCurItem() && GetCurItem()->Type() == PCB_MARKER_T )
( (MARKER_PCB*) GetCurItem() )->DisplayMarkerInfo( this );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_DRAWING_LAYER:
if( GetCurItem()->GetFlags() != 0 )
break;
Delete_Drawings_All_Layer( GetCurItem()->GetLayer() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_DRAWING:
#ifndef USE_WX_OVERLAY
InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), &dc );
#else
// #1277772 - Draw into dialog converted in refresh request
InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), NULL );
m_canvas->Refresh();
#endif
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_DRAWING_REQUEST:
m_canvas->MoveCursorToCrossHair();
Start_Move_DrawItem( (DRAWSEGMENT*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
End_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
if( End_Zone( &dc ) )
SetCurItem( NULL );
}
m_canvas->SetAutoPanRequest( false );
break;
case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
if( Delete_LastCreatedCorner( &dc ) == 0 ) // No more segment in outline,
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
m_canvas->MoveCursorToCrossHair();
StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
m_canvas->MoveCursorToCrossHair();
StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
m_canvas->MoveCursorToCrossHair();
Start_DragTrackSegmentAndKeepSlope( (TRACK*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_BREAK_TRACK:
m_canvas->MoveCursorToCrossHair();
{
TRACK* track = (TRACK*) GetScreen()->GetCurItem();
wxPoint pos = GetCrossHairPosition();
track->Draw( m_canvas, &dc, GR_XOR );
PICKED_ITEMS_LIST itemsListPicker;
TRACK* newtrack = GetBoard()->CreateLockPoint( pos, track, &itemsListPicker );
SaveCopyInUndoList( itemsListPicker, UR_UNSPECIFIED );
track->Draw( m_canvas, &dc, GR_XOR );
newtrack->Draw( m_canvas, &dc, GR_XOR );
// compute the new ratsnest, because connectivity could change
TestNetConnection( &dc, track->GetNetCode() );
}
break;
case ID_MENU_PCB_CLEAN:
Clean_Pcb();
break;
case ID_MENU_PCB_SWAP_LAYERS:
Swap_Layers( event );
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC:
{
wxConfigBase* cfg = Pgm().CommonSettings();
cfg->Read( wxT( "module_doc_file" ), g_DocModulesFileName );
GetAssociatedDocument( this, g_DocModulesFileName, &Kiface().KifaceSearch() );
}
break;
case ID_MENU_ARCHIVE_NEW_MODULES:
ArchiveModulesOnBoard( true );
break;
case ID_MENU_ARCHIVE_ALL_MODULES:
ArchiveModulesOnBoard( false );
break;
case ID_GEN_IMPORT_DXF_FILE:
InvokeDXFDialogImport( this );
m_canvas->Refresh();
break;
default:
wxString msg;
msg.Printf( wxT( "PCB_EDIT_FRAME::Process_Special_Functions() unknown event id %d" ),
id );
DisplayError( this, msg );
break;
}
m_canvas->CrossHairOn( &dc );
m_canvas->SetIgnoreMouseEvents( false );
}
