void LIB_EDIT_FRAME::OnOrient( wxCommandEvent& aEvent )
{
    INSTALL_UNBUFFERED_DC( dc, m_canvas );
    SCH_SCREEN* screen = GetScreen();
    // Allows block rotate operation on hot key.
    if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
    {
        if( aEvent.GetId() == ID_LIBEDIT_MIRROR_X )
        {
            m_canvas->MoveCursorToCrossHair();
            screen->m_BlockLocate.SetMessageBlock( this );
            screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
            HandleBlockEnd( &dc );
        }
        else if( aEvent.GetId() == ID_LIBEDIT_MIRROR_Y )
        {
            m_canvas->MoveCursorToCrossHair();
            screen->m_BlockLocate.SetMessageBlock( this );
            screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_Y );
            HandleBlockEnd( &dc );
        }
    }
}
Esempio n. 2
0
void WinEDA_GerberFrame::Process_Special_Functions(wxCommandEvent& event)
/********************************************************************************/
/* Traite les selections d'outils et les commandes appelees du menu POPUP
*/
{
int id = event.GetId();
int layer = GetScreen()->m_Active_Layer;
GERBER_Descr * gerber_layer	= g_GERBER_Descr_List[layer];
wxPoint pos;
wxClientDC dc(DrawPanel);

	DrawPanel->PrepareGraphicContext(&dc);

	wxGetMousePosition(&pos.x, &pos.y);

	pos.y += 20;

	switch ( id )	// Arret eventuel de la commande de déplacement en cours
	{
		case wxID_CUT:
		case wxID_COPY:
		case ID_POPUP_DELETE_BLOCK:
		case ID_POPUP_PLACE_BLOCK:
		case ID_POPUP_ZOOM_BLOCK:
		case ID_POPUP_INVERT_BLOCK:
		case ID_POPUP_ROTATE_BLOCK:
		case ID_POPUP_COPY_BLOCK:
			break;

		case ID_POPUP_CANCEL_CURRENT_COMMAND:
			if( GetScreen()->ManageCurseur &&
				GetScreen()->ForceCloseManageCurseur )
				{
				GetScreen()->ForceCloseManageCurseur(this, &dc);
				}
			/* ne devrait pas etre execute, sauf bug */
			if (m_CurrentScreen->BlockLocate.m_Command != BLOCK_IDLE)
			{
				m_CurrentScreen->BlockLocate.m_Command = BLOCK_IDLE;
				m_CurrentScreen->BlockLocate.m_State = STATE_NO_BLOCK;
				m_CurrentScreen->BlockLocate.m_BlockDrawStruct = NULL;
			}
			if (m_ID_current_state == 0 )
				SetToolID(0, wxCURSOR_ARROW, wxEmptyString);
			else SetCursor(DrawPanel->m_PanelCursor = DrawPanel->m_PanelDefaultCursor);
			break;

		default:	// Arret dea commande de déplacement en cours
			if( GetScreen()->ManageCurseur &&
				GetScreen()->ForceCloseManageCurseur )
			{
				GetScreen()->ForceCloseManageCurseur(this, &dc);
			}
			SetToolID(0, wxCURSOR_ARROW, wxEmptyString);
			break;
	}

	switch ( id )	// Traitement des commandes
	{
		case ID_EXIT :
			Close(TRUE);
			break;

		case ID_NEW_PROJECT:
		case ID_LOAD_PROJECT:
			Files_io(event);
			break;

		case ID_PCB_GLOBAL_DELETE:
			Erase_Current_Layer(&dc, TRUE);
			break;

		case wxID_CUT:
			break;

		case wxID_COPY:
			break;

		case wxID_PASTE:
//			HandleBlockBegin(&dc, BLOCK_PASTE);
			break;

		case ID_UNDO_BUTT:
			UnDeleteItem(&dc);
			break;

		case ID_GET_TOOLS:
//			InstallToolsFrame(this, wxPoint(-1,-1) );
			break;

		case ID_FIND_ITEMS:
//			InstallFindFrame(this, pos);
			break;


		case ID_BUS_BUTT:
			SetToolID( id, wxCURSOR_PENCIL, wxT("Add Tracks"));
			break;

		case ID_LINE_COMMENT_BUTT:
			SetToolID( id, wxCURSOR_PENCIL, wxT("Add Drawing"));
			break;

		case ID_TEXT_COMMENT_BUTT:
			SetToolID( id, wxCURSOR_PENCIL, wxT("Add Text"));
			break;

		case ID_NO_SELECT_BUTT:
			SetToolID( 0, 0, wxEmptyString);
			break;

		case ID_POPUP_CLOSE_CURRENT_TOOL:
			SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
			break;

		case ID_POPUP_CANCEL_CURRENT_COMMAND:
			break;

		case ID_POPUP_END_LINE:
			DrawPanel->MouseToCursorSchema();
//			EndSegment(&dc);
			break;

		case ID_POPUP_PCB_DELETE_TRACKSEG:
			DrawPanel->MouseToCursorSchema();
			if ( GetScreen()->m_CurrentItem == NULL) break;
			Delete_Segment(&dc, (TRACK*)GetScreen()->m_CurrentItem);
			GetScreen()->m_CurrentItem = NULL;
			GetScreen()->SetModify();
			break;

		case ID_PCB_DELETE_ITEM_BUTT:
			SetToolID( id, wxCURSOR_PENCIL, wxT("Delete item"));
			break;

		case ID_POPUP_SCH_MOVE_ITEM_REQUEST:
			DrawPanel->MouseToCursorSchema();
			Process_Move_Item(this, GetScreen()->m_CurrentItem, &dc);
			break;

		case ID_TOOLBARH_PCB_SELECT_LAYER:
			{
			GetScreen()->m_Active_Layer = m_SelLayerBox->GetSelection();
			DrawPanel->Refresh(TRUE);
			break;
			}

		case ID_TOOLBARH_GERBER_SELECT_TOOL:
			if ( gerber_layer )
			{
				int tool = m_SelLayerTool->GetSelection();
				if ( tool > 0 ) tool = tool - 1 + FIRST_DCODE;
				else tool = 0;
				gerber_layer->m_Selected_Tool = tool;
				DrawPanel->Refresh(TRUE);
			}
			else DisplayError(this, _("No layer selected") );
			break;

		case ID_GERBVIEW_SHOW_LIST_DCODES:
			Liste_D_Codes(&dc);
			break;

		case ID_GERBVIEW_SHOW_SOURCE:
			if ( gerber_layer )
			{
			wxString editorname = GetEditorName();
			if ( ! editorname.IsEmpty() )
				ExecuteFile(this, editorname, gerber_layer->m_FileName);
			}
			break;

		case ID_POPUP_PLACE_BLOCK:
			GetScreen()->BlockLocate.m_Command = BLOCK_MOVE;
			DrawPanel->m_AutoPAN_Request = FALSE;
			HandleBlockPlace(&dc);
			break;

		case ID_POPUP_COPY_BLOCK:
			GetScreen()->BlockLocate.m_Command = BLOCK_COPY;
			m_CurrentScreen->BlockLocate.SetMessageBlock(this);
			DrawPanel->m_AutoPAN_Request = FALSE;
			HandleBlockEnd(&dc);
			break;

		case ID_POPUP_ZOOM_BLOCK:
			GetScreen()->BlockLocate.m_Command = BLOCK_ZOOM;
			m_CurrentScreen->BlockLocate.SetMessageBlock(this);
			m_CurrentScreen->BlockLocate.SetMessageBlock(this);
			HandleBlockEnd(&dc);
			break;

		case ID_POPUP_DELETE_BLOCK:
			GetScreen()->BlockLocate.m_Command = BLOCK_DELETE;
			m_CurrentScreen->BlockLocate.SetMessageBlock(this);
			HandleBlockEnd(&dc);
			break;

		default:
			wxMessageBox( wxT("WinEDA_GerberFrame::Process_Special_Functions error"));
			break;
	}

	SetToolbars();
}
Esempio n. 3
0
void SCH_EDIT_FRAME::OnOrient( wxCommandEvent& aEvent )
{
    SCH_SCREEN* screen = GetScreen();
    SCH_ITEM*   item   = screen->GetCurItem();

    INSTALL_UNBUFFERED_DC( dc, m_canvas );

    // Allows block rotate operation on hot key.
    if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
    {
        if( aEvent.GetId() == ID_SCH_MIRROR_X )
        {
            m_canvas->MoveCursorToCrossHair();
            screen->m_BlockLocate.SetMessageBlock( this );
            screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
            HandleBlockEnd( &dc );
        }
        else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
        {
            m_canvas->MoveCursorToCrossHair();
            screen->m_BlockLocate.SetMessageBlock( this );
            screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_Y );
            HandleBlockEnd( &dc );
        }
        else
        {
            wxFAIL_MSG( wxT( "Unknown block oriention command ID." ) );
        }

        return;
    }

    if( item == NULL )
    {
        // If we didn't get here by a hot key, then something has gone wrong.
        if( aEvent.GetInt() == 0 )
            return;

        EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();

        wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );

        item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::OrientableItems,
                                  aEvent.GetInt() );

        // Exit if no item found at the current location or the item is already being edited.
        if( (item == NULL) || (item->GetFlags() != 0) )
            return;
    }


    switch( item->Type() )
    {
    case SCH_COMPONENT_T:
        if( aEvent.GetId() == ID_SCH_MIRROR_X )
            OrientComponent( CMP_MIRROR_X );
        else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
            OrientComponent( CMP_MIRROR_Y );
        else if( aEvent.GetId() == ID_SCH_ORIENT_NORMAL )
            OrientComponent( CMP_NORMAL );
        else
            wxFAIL_MSG( wxT( "Invalid orient schematic component command ID." ) );

        break;

    case SCH_BITMAP_T:
        if( aEvent.GetId() == ID_SCH_MIRROR_X )
            MirrorImage( (SCH_BITMAP*) item, true );
        else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
            MirrorImage( (SCH_BITMAP*) item, false );

        break;

    default:
        wxFAIL_MSG( wxString::Format( wxT( "Schematic object type %s cannot be oriented." ),
                                      GetChars( item->GetClass() ) ) );
    }

    if( item->GetFlags() == 0 )
        screen->SetCurItem( NULL );
}
Esempio n. 4
0
void SCH_EDIT_FRAME::OnDragItem( wxCommandEvent& aEvent )
{
    SCH_SCREEN* screen = GetScreen();
    SCH_ITEM* item = screen->GetCurItem();

    INSTALL_UNBUFFERED_DC( dc, m_canvas );

    if( item == NULL )
    {
        // If we didn't get here by a hot key, then something has gone wrong.
        if( aEvent.GetInt() == 0 )
            return;

        EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();

        wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );

        item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::DraggableItems,
                                  aEvent.GetInt() );

        // Exit if no item found at the current location or the item is already being edited.
        if( (item == NULL) || (item->GetFlags() != 0) )
            return;
    }

    switch( item->Type() )
    {
    case SCH_BUS_BUS_ENTRY_T:
    case SCH_BUS_WIRE_ENTRY_T:
    case SCH_LINE_T:
    case SCH_JUNCTION_T:
        if( item->GetLayer() == LAYER_BUS )
            break;

        // Fall thru if item is not on bus layer.
    case SCH_COMPONENT_T:
    case SCH_LABEL_T:
    case SCH_GLOBAL_LABEL_T:
    case SCH_HIERARCHICAL_LABEL_T:
    case SCH_SHEET_T:
        m_canvas->MoveCursorToCrossHair();

        // The easiest way to handle a drag component or sheet command
        // is to simulate a block drag command
        if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
        {
            if( !HandleBlockBegin( &dc, BLOCK_DRAG, GetCrossHairPosition() ) )
                break;

            // Give a non null size to the search block:
            screen->m_BlockLocate.Inflate( 1 );
            HandleBlockEnd( &dc );
        }

        break;

    default:
        wxFAIL_MSG( wxString::Format( wxT( "Cannot drag schematic item type %s." ),
                                      GetChars( item->GetClass() ) ) );
    }
}
Esempio n. 5
0
void SCH_EDIT_FRAME::OnRotate( wxCommandEvent& aEvent )
{
    SCH_SCREEN* screen = GetScreen();
    SCH_ITEM*   item = screen->GetCurItem();

    INSTALL_UNBUFFERED_DC( dc, m_canvas );

    // Allows block rotate operation on hot key.
    if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
    {
        screen->m_BlockLocate.SetCommand( BLOCK_ROTATE );
        HandleBlockEnd( &dc );
        return;
    }

    if( item == NULL )
    {
        // If we didn't get here by a hot key, then something has gone wrong.
        if( aEvent.GetInt() == 0 )
            return;

        EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();

        wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );

        item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::RotatableItems,
                                  aEvent.GetInt() );

        // Exit if no item found at the current location or the item is already being edited.
        if( (item == NULL) || (item->GetFlags() != 0) )
            return;
    }

    switch( item->Type() )
    {
    case SCH_COMPONENT_T:
        if( aEvent.GetId() == ID_SCH_ROTATE_CLOCKWISE )
            OrientComponent( CMP_ROTATE_CLOCKWISE );
        else if( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE )
            OrientComponent( CMP_ROTATE_COUNTERCLOCKWISE );
        else
            wxFAIL_MSG( wxT( "Unknown rotate item command ID." ) );

        break;

    case SCH_TEXT_T:
    case SCH_LABEL_T:
    case SCH_GLOBAL_LABEL_T:
    case SCH_HIERARCHICAL_LABEL_T:
        m_canvas->MoveCursorToCrossHair();
        ChangeTextOrient( (SCH_TEXT*) item, &dc );
        break;

    case SCH_FIELD_T:
        m_canvas->MoveCursorToCrossHair();
        RotateField( (SCH_FIELD*) item, &dc );
        break;

    case SCH_BITMAP_T:
        RotateImage( (SCH_BITMAP*) item );
        break;

    case SCH_SHEET_T:           /// @todo allow sheet rotate on hotkey
    default:
        wxFAIL_MSG( wxString::Format( wxT( "Cannot rotate schematic item type %s." ),
                                      GetChars( item->GetClass() ) ) );
    }

    if( item->GetFlags() == 0 )
        screen->SetCurItem( NULL );
}
Esempio n. 6
0
void SCH_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
    int         id = event.GetId();
    wxPoint     pos;
    SCH_SCREEN* screen = GetScreen();
    SCH_ITEM*   item = screen->GetCurItem();

    pos = wxGetMousePosition();

    pos.y += 20;

    // If needed, stop the current command and deselect current tool
    switch( id )
    {
    case wxID_CUT:
    case wxID_COPY:
    case ID_POPUP_CANCEL_CURRENT_COMMAND:
    case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
    case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
    case ID_POPUP_SCH_BEGIN_WIRE:
    case ID_POPUP_SCH_BEGIN_BUS:
    case ID_POPUP_END_LINE:
    case ID_POPUP_SCH_SET_SHAPE_TEXT:
    case ID_POPUP_SCH_CLEANUP_SHEET:
    case ID_POPUP_SCH_END_SHEET:
    case ID_POPUP_SCH_RESIZE_SHEET:
    case ID_POPUP_IMPORT_GLABEL:
    case ID_POPUP_SCH_INIT_CMP:
    case ID_POPUP_SCH_DISPLAYDOC_CMP:
    case ID_POPUP_SCH_EDIT_CONVERT_CMP:
    case ID_POPUP_DELETE_BLOCK:
    case ID_POPUP_PLACE_BLOCK:
    case ID_POPUP_ZOOM_BLOCK:
    case ID_POPUP_DRAG_BLOCK:
    case ID_POPUP_COPY_BLOCK:
    case ID_POPUP_SCH_DELETE_NODE:
    case ID_POPUP_SCH_DELETE_CONNECTION:
    case ID_POPUP_SCH_ENTER_SHEET:
    case ID_POPUP_SCH_LEAVE_SHEET:
    case ID_POPUP_SCH_ADD_JUNCTION:
    case ID_POPUP_SCH_ADD_LABEL:
    case ID_POPUP_SCH_GETINFO_MARKER:

        /* At this point: Do nothing. these commands do not need to stop the
         * current command (mainly a block command) or reset the current state
         * They will be executed later, in next switch structure.
         */
        break;

    case ID_POPUP_SCH_DELETE_CMP:
    case ID_POPUP_SCH_DELETE:

        // Stop the current command (if any) but keep the current tool
        m_canvas->EndMouseCapture();
        break;

    default:

        // Stop the current command and deselect the current tool
        m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
        break;
    }

    INSTALL_UNBUFFERED_DC( dc, m_canvas );
    item = screen->GetCurItem();    // Can be modified by previous calls.

    switch( id )
    {
    case ID_HIERARCHY:
        InstallHierarchyFrame( &dc, pos );
        SetRepeatItem( NULL );
        break;

    case wxID_CUT:
        if( screen->m_BlockLocate.GetCommand() != BLOCK_MOVE )
            break;

        screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
        screen->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        SetRepeatItem( NULL );
        SetSheetNumberAndCount();
        break;

    case wxID_PASTE:
        HandleBlockBegin( &dc, BLOCK_PASTE, GetCrossHairPosition() );
        break;

    case ID_POPUP_SCH_ENTRY_SELECT_SLASH:
        m_canvas->MoveCursorToCrossHair();
        SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '/' );
        break;

    case ID_POPUP_SCH_ENTRY_SELECT_ANTISLASH:
        m_canvas->MoveCursorToCrossHair();
        SetBusEntryShape( &dc, dynamic_cast<SCH_BUS_ENTRY_BASE*>( item ), '\\' );
        break;

    case ID_POPUP_CANCEL_CURRENT_COMMAND:
        if( m_canvas->IsMouseCaptured() )
        {
            m_canvas->EndMouseCapture();
            SetToolID( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString );
        }
        else
        {
            SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
        }

        break;

    case ID_POPUP_END_LINE:
        m_canvas->MoveCursorToCrossHair();
        EndSegment( &dc );
        break;

    case ID_POPUP_SCH_BEGIN_WIRE:
        m_canvas->MoveCursorToCrossHair();
        OnLeftClick( &dc, GetCrossHairPosition() );
        break;

    case ID_POPUP_SCH_BEGIN_BUS:
        m_canvas->MoveCursorToCrossHair();
        OnLeftClick( &dc, GetCrossHairPosition() );
        break;

    case ID_POPUP_SCH_SET_SHAPE_TEXT:
        // Not used
        break;

    case ID_POPUP_SCH_DELETE_NODE:
    case ID_POPUP_SCH_DELETE_CONNECTION:
        m_canvas->MoveCursorToCrossHair();
        DeleteConnection( id == ID_POPUP_SCH_DELETE_CONNECTION );
        screen->SetCurItem( NULL );
        SetRepeatItem( NULL );
        screen->TestDanglingEnds( m_canvas, &dc );
        m_canvas->Refresh();
        break;

    case ID_POPUP_SCH_BREAK_WIRE:
    {
        DLIST< SCH_ITEM > oldWires;

        oldWires.SetOwnership( false );      // Prevent DLIST for deleting items in destructor.
        m_canvas->MoveCursorToCrossHair();
        screen->ExtractWires( oldWires, true );
        screen->BreakSegment( GetCrossHairPosition() );

        if( oldWires.GetCount() != 0 )
        {
            PICKED_ITEMS_LIST oldItems;

            oldItems.m_Status = UR_WIRE_IMAGE;

            while( oldWires.GetCount() != 0 )
            {
                ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
                oldItems.PushItem( picker );
            }

            SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE );
        }

        screen->TestDanglingEnds( m_canvas, &dc );
    }
    break;

    case ID_POPUP_SCH_DELETE_CMP:
    case ID_POPUP_SCH_DELETE:
        if( item == NULL )
            break;

        DeleteItem( item );
        screen->SetCurItem( NULL );
        SetRepeatItem( NULL );
        screen->TestDanglingEnds( m_canvas, &dc );
        SetSheetNumberAndCount();
        OnModify();
        break;

    case ID_POPUP_SCH_END_SHEET:
        m_canvas->MoveCursorToCrossHair();
        addCurrentItemToList( &dc );
        break;

    case ID_POPUP_SCH_RESIZE_SHEET:
        ReSizeSheet( (SCH_SHEET*) item, &dc );
        screen->TestDanglingEnds( m_canvas, &dc );
        break;

    case ID_POPUP_IMPORT_GLABEL:
        if( item != NULL && item->Type() == SCH_SHEET_T )
            screen->SetCurItem( ImportSheetPin( (SCH_SHEET*) item, &dc ) );
        break;

    case ID_POPUP_SCH_CLEANUP_SHEET:
        if( item != NULL && item->Type() == SCH_SHEET_T )
        {
            SCH_SHEET* sheet = (SCH_SHEET*) item;

            if( !sheet->HasUndefinedPins() )
            {
                DisplayInfoMessage( this,
                                    _( "There are no undefined labels in this sheet to clean up." ) );
                return;
            }

            if( !IsOK( this, _( "Do you wish to cleanup this sheet?" ) ) )
                return;

            /* Save sheet in undo list before cleaning up unreferenced hierarchical labels. */
            SaveCopyInUndoList( sheet, UR_CHANGED );
            sheet->CleanupSheet();
            OnModify();
            m_canvas->RefreshDrawingRect( sheet->GetBoundingBox() );
        }
        break;

    case ID_POPUP_SCH_INIT_CMP:
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_SCH_EDIT_CONVERT_CMP:

        // Ensure the struct is a component (could be a struct of a component, like Field, text..)
        if( item && item->Type() == SCH_COMPONENT_T )
        {
            m_canvas->MoveCursorToCrossHair();
            ConvertPart( (SCH_COMPONENT*) item, &dc );
        }

        break;

    case ID_POPUP_SCH_DISPLAYDOC_CMP:

        // Ensure the struct is a component (could be a piece of a component, like Field, text..)
        if( item && item->Type() == SCH_COMPONENT_T )
        {
            LIB_ALIAS* LibEntry;
            LibEntry = CMP_LIBRARY::FindLibraryEntry( ( (SCH_COMPONENT*) item )->GetLibName() );

            if( LibEntry && LibEntry->GetDocFileName() != wxEmptyString )
            {
                GetAssociatedDocument( this, LibEntry->GetDocFileName(),
                                       &wxGetApp().GetLibraryPathList() );
            }
        }
        break;

    case ID_POPUP_SCH_ENTER_SHEET:

        if( item && (item->Type() == SCH_SHEET_T) )
        {
            m_CurrentSheet->Push( (SCH_SHEET*) item );
            DisplayCurrentSheet();
        }

        break;

    case ID_POPUP_SCH_LEAVE_SHEET:
        m_CurrentSheet->Pop();
        DisplayCurrentSheet();
        break;

    case wxID_COPY:         // really this is a Save block for paste
        screen->m_BlockLocate.SetCommand( BLOCK_SAVE );
        screen->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_PLACE_BLOCK:
        m_canvas->SetAutoPanRequest( false );
        m_canvas->MoveCursorToCrossHair();
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_ZOOM_BLOCK:
        screen->m_BlockLocate.SetCommand( BLOCK_ZOOM );
        screen->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_DELETE_BLOCK:
        m_canvas->MoveCursorToCrossHair();
        screen->m_BlockLocate.SetCommand( BLOCK_DELETE );
        screen->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        SetSheetNumberAndCount();
        break;

    case ID_POPUP_COPY_BLOCK:
        m_canvas->MoveCursorToCrossHair();
        screen->m_BlockLocate.SetCommand( BLOCK_COPY );
        screen->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_DRAG_BLOCK:
        m_canvas->MoveCursorToCrossHair();
        screen->m_BlockLocate.SetCommand( BLOCK_DRAG );
        screen->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_SCH_ADD_JUNCTION:
        m_canvas->MoveCursorToCrossHair();
        screen->SetCurItem( AddJunction( &dc, GetCrossHairPosition(), true ) );
        screen->TestDanglingEnds( m_canvas, &dc );
        screen->SetCurItem( NULL );
        break;

    case ID_POPUP_SCH_ADD_LABEL:
    case ID_POPUP_SCH_ADD_GLABEL:
        screen->SetCurItem( CreateNewText( &dc, id == ID_POPUP_SCH_ADD_LABEL ?
                                           LAYER_LOCLABEL : LAYER_GLOBLABEL ) );
        item = screen->GetCurItem();

        if( item )
            addCurrentItemToList( &dc );

        break;

    case ID_POPUP_SCH_GETINFO_MARKER:
        if( item && item->Type() == SCH_MARKER_T )
            ( (SCH_MARKER*) item )->DisplayMarkerInfo( this );

        break;

    default:        // Log error:
        wxFAIL_MSG( wxString::Format( wxT( "Cannot process command event ID %d" ),
                                      event.GetId() ) );
        break;
    }

    // End switch ( id )    (Command execution)

    if( GetToolId() == ID_NO_TOOL_SELECTED )
        SetRepeatItem( NULL );
}
bool PCB_EDIT_FRAME::AppendBoardFile( const wxString& aFullFileName, int aCtl )
{
    IO_MGR::PCB_FILE_T  pluginType = plugin_type( aFullFileName, aCtl );
    PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );

    // keep trace of existing items, in order to know what are the new items
    // (for undo command for instance)

    // Tracks are inserted, not append, so mark existing tracks to know what are
    // the new tracks
    for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
        track->SetFlags( FLAG0 );

    // Other items are append to the item list, so keep trace to the
    // last existing item is enough
    MODULE* module = GetBoard()->m_Modules.GetLast();
    BOARD_ITEM* drawing = GetBoard()->m_Drawings.GetLast();
    int zonescount = GetBoard()->GetAreaCount();

    // Keep also the count of copper layers, because we can happen boards
    // with different copper layers counts,
    // and the enabled layers
    int initialCopperLayerCount = GetBoard()->GetCopperLayerCount();
    LSET initialEnabledLayers = GetBoard()->GetEnabledLayers();

    try
    {
        PROPERTIES  props;
        char        xbuf[30];
        char        ybuf[30];

        // EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
        sprintf( xbuf, "%d", GetPageSizeIU().x );
        sprintf( ybuf, "%d", GetPageSizeIU().y );

        props["page_width"]  = xbuf;
        props["page_height"] = ybuf;

        GetDesignSettings().m_NetClasses.Clear();
        pi->Load( aFullFileName, GetBoard(), &props );
    }
    catch( const IO_ERROR& ioe )
    {
        for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
            track->ClearFlags( FLAG0 );

        wxString msg = wxString::Format( _(
                "Error loading board.\n%s" ),
                GetChars( ioe.What() )
                );
        DisplayError( this, msg );

        return false;
    }

    // Now prepare a block move command to place the new items, and
    // prepare the undo command.
    BLOCK_SELECTOR& blockmove = GetScreen()->m_BlockLocate;
    HandleBlockBegin( NULL, BLOCK_PRESELECT_MOVE, wxPoint( 0, 0) );
    PICKED_ITEMS_LIST& blockitemsList = blockmove.GetItems();
    PICKED_ITEMS_LIST undoListPicker;
    ITEM_PICKER picker( NULL, UR_NEW );

    EDA_RECT bbox;          // the new items bounding box, for block move
    bool bboxInit = true;   // true until the bounding box is initialized

    for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
    {
        if( track->GetFlags() & FLAG0  )
        {
            track->ClearFlags( FLAG0 );
            continue;
        }

        track->SetFlags( IS_MOVED );
        picker.SetItem( track );
        undoListPicker.PushItem( picker );
        blockitemsList.PushItem( picker );

        if( bboxInit )
            bbox = track->GetBoundingBox();
        else
            bbox.Merge( track->GetBoundingBox() );

        bboxInit = false;
    }

    if( module )
        module = module->Next();
    else
        module = GetBoard()->m_Modules;

    for( ; module; module = module->Next() )
    {
        module->SetFlags( IS_MOVED );
        picker.SetItem( module );
        undoListPicker.PushItem( picker );
        blockitemsList.PushItem( picker );

        if( bboxInit )
            bbox = module->GetBoundingBox();
        else
            bbox.Merge( module->GetBoundingBox() );

        bboxInit = false;
    }

    if( drawing )
        drawing = drawing->Next();
    else
        drawing = GetBoard()->m_Drawings;

    for( ; drawing; drawing = drawing->Next() )
    {
        drawing->SetFlags( IS_MOVED );
        picker.SetItem( drawing );
        undoListPicker.PushItem( picker );
        blockitemsList.PushItem( picker );

        if( bboxInit )
            bbox = drawing->GetBoundingBox();
        else
            bbox.Merge( drawing->GetBoundingBox() );

        bboxInit = false;
    }

    for( ZONE_CONTAINER* zone = GetBoard()->GetArea( zonescount ); zone;
         zone = GetBoard()->GetArea( zonescount ) )
    {
        zone->SetFlags( IS_MOVED );
        picker.SetItem( zone );
        undoListPicker.PushItem( picker );
        blockitemsList.PushItem( picker );
        zonescount++;

        if( bboxInit )
            bbox = zone->GetBoundingBox();
        else
            bbox.Merge( zone->GetBoundingBox() );

        bboxInit = false;
    }

    SaveCopyInUndoList( undoListPicker, UR_NEW );

    // we should not ask PLUGINs to do these items:
    int copperLayerCount = GetBoard()->GetCopperLayerCount();

    if( copperLayerCount > initialCopperLayerCount )
        GetBoard()->SetCopperLayerCount( copperLayerCount );

    // Enable all used layers, and make them visible:
    LSET enabledLayers = GetBoard()->GetEnabledLayers();
    enabledLayers |= initialEnabledLayers;
    GetBoard()->SetEnabledLayers( enabledLayers );
    GetBoard()->SetVisibleLayers( enabledLayers );
    ReCreateLayerBox();
    ReFillLayerWidget();

    if( IsGalCanvasActive() )
        static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() )->SyncLayersVisibility( GetBoard() );

    GetBoard()->BuildListOfNets();
    GetBoard()->SynchronizeNetsAndNetClasses();

    SetStatusText( wxEmptyString );
    BestZoom();

    // Finish block move command:
    wxPoint cpos = GetNearestGridPosition( bbox.Centre() );
    blockmove.SetOrigin( bbox.GetOrigin() );
    blockmove.SetSize( bbox.GetSize() );
    blockmove.SetLastCursorPosition( cpos );
    HandleBlockEnd( NULL );

    return true;
}
void LIB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
    int     id = event.GetId();
    wxPoint pos;

    m_canvas->SetIgnoreMouseEvents( true );

    wxGetMousePosition( &pos.x, &pos.y );
    pos.y += 20;

    switch( id )   // Stop placement commands before handling new command.
    {
    case ID_POPUP_LIBEDIT_END_CREATE_ITEM:
    case ID_LIBEDIT_EDIT_PIN:
    case ID_POPUP_LIBEDIT_BODY_EDIT_ITEM:
    case ID_POPUP_LIBEDIT_FIELD_EDIT_ITEM:
    case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINSIZE_ITEM:
    case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINNAMESIZE_ITEM:
    case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINNUMSIZE_ITEM:
    case ID_POPUP_ZOOM_BLOCK:
    case ID_POPUP_DELETE_BLOCK:
    case ID_POPUP_COPY_BLOCK:
    case ID_POPUP_SELECT_ITEMS_BLOCK:
    case ID_POPUP_MIRROR_X_BLOCK:
    case ID_POPUP_MIRROR_Y_BLOCK:
    case ID_POPUP_ROTATE_BLOCK:
    case ID_POPUP_PLACE_BLOCK:
    case ID_POPUP_LIBEDIT_DELETE_CURRENT_POLY_SEGMENT:
        break;

    case ID_POPUP_LIBEDIT_CANCEL_EDITING:
        if( m_canvas->IsMouseCaptured() )
            m_canvas->EndMouseCapture();
        else
            m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
        break;

    case ID_POPUP_LIBEDIT_DELETE_ITEM:
        m_canvas->EndMouseCapture();
        break;

    default:
        m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(),
                                    wxEmptyString );
        break;
    }

    INSTALL_UNBUFFERED_DC( dc, m_canvas );

    switch( id )
    {
    case ID_POPUP_LIBEDIT_CANCEL_EDITING:
        break;

    case ID_LIBEDIT_SELECT_CURRENT_LIB:
        SelectActiveLibrary();
        break;

    case ID_LIBEDIT_SAVE_CURRENT_PART:
        {
            LIB_PART*   part = GetCurPart();

            if( !part )
            {
                DisplayError( this, _( "No part to save." ) );
                break;
            }

            PART_LIB*   lib  = GetCurLib();

            if( !lib )
                SelectActiveLibrary();

            lib = GetCurLib();

            if( !lib )
            {
                DisplayError( this, _( "No library specified." ) );
                break;
            }

            SaveOnePart( lib );
        }
        break;

    case ID_LIBEDIT_EDIT_PIN_BY_PIN:
        m_editPinsPerPartOrConvert = m_mainToolBar->GetToolToggled( ID_LIBEDIT_EDIT_PIN_BY_PIN );
        break;

    case ID_POPUP_LIBEDIT_END_CREATE_ITEM:
        m_canvas->MoveCursorToCrossHair();
        if( m_drawItem )
        {
            EndDrawGraphicItem( &dc );
        }
        break;

    case ID_POPUP_LIBEDIT_BODY_EDIT_ITEM:
        if( m_drawItem )
        {
            m_canvas->CrossHairOff( &dc );

            switch( m_drawItem->Type() )
            {
            case LIB_ARC_T:
            case LIB_CIRCLE_T:
            case LIB_RECTANGLE_T:
            case LIB_POLYLINE_T:
                EditGraphicSymbol( &dc, m_drawItem );
                break;

            case LIB_TEXT_T:
                EditSymbolText( &dc, m_drawItem );
                break;

            default:
                ;
            }

            m_canvas->CrossHairOn( &dc );
        }
        break;

    case ID_POPUP_LIBEDIT_DELETE_CURRENT_POLY_SEGMENT:
        {
            // Delete the last created segment, while creating a polyline draw item
            if( m_drawItem == NULL )
                break;

            m_canvas->MoveCursorToCrossHair();
            STATUS_FLAGS oldFlags = m_drawItem->GetFlags();
            m_drawItem->ClearFlags();
            m_drawItem->Draw( m_canvas, &dc, wxPoint( 0, 0 ), UNSPECIFIED_COLOR, g_XorMode, NULL,
                              DefaultTransform );
            ( (LIB_POLYLINE*) m_drawItem )->DeleteSegment( GetCrossHairPosition( true ) );
            m_drawItem->Draw( m_canvas, &dc, wxPoint( 0, 0 ), UNSPECIFIED_COLOR, g_XorMode, NULL,
                              DefaultTransform );
            m_drawItem->SetFlags( oldFlags );
            m_lastDrawItem = NULL;
        }
        break;

    case ID_POPUP_LIBEDIT_DELETE_ITEM:
        if( m_drawItem )
            deleteItem( &dc );

        break;

    case ID_POPUP_LIBEDIT_MOVE_ITEM_REQUEST:
        if( m_drawItem == NULL )
            break;

        if( m_drawItem->Type() == LIB_PIN_T )
            StartMovePin( &dc );
        else
            StartMoveDrawSymbol( &dc );
        break;

    case ID_POPUP_LIBEDIT_MODIFY_ITEM:

        if( m_drawItem == NULL )
            break;

        m_canvas->MoveCursorToCrossHair();
        if( m_drawItem->Type() == LIB_RECTANGLE_T
            || m_drawItem->Type() == LIB_CIRCLE_T
            || m_drawItem->Type() == LIB_POLYLINE_T
            || m_drawItem->Type() == LIB_ARC_T
            )
        {
            StartModifyDrawSymbol( &dc );
        }

        break;

    case ID_POPUP_LIBEDIT_FIELD_EDIT_ITEM:
        if( m_drawItem == NULL )
            break;

        m_canvas->CrossHairOff( &dc );

        if( m_drawItem->Type() == LIB_FIELD_T )
        {
            EditField( (LIB_FIELD*) m_drawItem );
        }

        m_canvas->MoveCursorToCrossHair();
        m_canvas->CrossHairOn( &dc );
        break;

    case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINSIZE_ITEM:
    case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINNAMESIZE_ITEM:
    case ID_POPUP_LIBEDIT_PIN_GLOBAL_CHANGE_PINNUMSIZE_ITEM:
        {
            if( !m_drawItem || m_drawItem->Type() != LIB_PIN_T )
                break;

            LIB_PART*      part = GetCurPart();

            SaveCopyInUndoList( part );

            GlobalSetPins( (LIB_PIN*) m_drawItem, id );
            m_canvas->MoveCursorToCrossHair();
            m_canvas->Refresh();
        }
        break;

    case ID_POPUP_ZOOM_BLOCK:
        m_canvas->SetAutoPanRequest( false );
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_DELETE_BLOCK:
        m_canvas->SetAutoPanRequest( false );
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
        m_canvas->MoveCursorToCrossHair();
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_COPY_BLOCK:
        m_canvas->SetAutoPanRequest( false );
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
        m_canvas->MoveCursorToCrossHair();
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_SELECT_ITEMS_BLOCK:
        m_canvas->SetAutoPanRequest( false );
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_SELECT_ITEMS_ONLY );
        m_canvas->MoveCursorToCrossHair();
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_MIRROR_Y_BLOCK:
        m_canvas->SetAutoPanRequest( false );
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_Y );
        m_canvas->MoveCursorToCrossHair();
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_MIRROR_X_BLOCK:
        m_canvas->SetAutoPanRequest( false );
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
        m_canvas->MoveCursorToCrossHair();
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_ROTATE_BLOCK:
        m_canvas->SetAutoPanRequest( false );
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
        m_canvas->MoveCursorToCrossHair();
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_PLACE_BLOCK:
        m_canvas->SetAutoPanRequest( false );
        m_canvas->MoveCursorToCrossHair();
        HandleBlockPlace( &dc );
        break;

    default:
        DisplayError( this, wxT( "LIB_EDIT_FRAME::Process_Special_Functions error" ) );
        break;
    }

    m_canvas->SetIgnoreMouseEvents( false );

    if( GetToolId() == ID_NO_TOOL_SELECTED )
        m_lastDrawItem = NULL;
}
Esempio n. 9
0
void WinEDA_PcbFrame::Process_Special_Functions(wxCommandEvent& event)
/*********************************************************************/
/* Traite les selections d'outils et les commandes appelees du menu POPUP
*/
{
    int id = event.GetId();
    wxPoint pos;
    wxClientDC dc(DrawPanel);
    int itmp;

    DrawPanel->PrepareGraphicContext(&dc);

    wxGetMousePosition(&pos.x, &pos.y);

    pos.y += 20;

    switch ( id )	// Arret eventuel de la commande de déplacement en cours
    {
    case wxID_CUT:
    case wxID_COPY:
    case ID_AUX_TOOLBAR_PCB_TRACK_WIDTH:
    case ID_AUX_TOOLBAR_PCB_VIA_SIZE:
    case ID_ON_GRID_SELECT:
    case ID_ON_ZOOM_SELECT:
    case ID_PCB_USER_GRID_SETUP:
    case ID_TOOLBARH_PCB_SELECT_LAYER:
    case ID_POPUP_PCB_ROTATE_TEXTEPCB:
    case ID_POPUP_PCB_EDIT_TEXTEPCB:
    case ID_POPUP_PCB_EDIT_MIRE:
    case ID_POPUP_PCB_ROTATE_TEXTMODULE:
    case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
    case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
    case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
    case ID_POPUP_PCB_EDIT_MODULE:
    case ID_POPUP_PCB_EDIT_TEXTMODULE:
    case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
    case ID_POPUP_PCB_END_TRACK:
    case ID_POPUP_PCB_PLACE_VIA:
    case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
    case ID_POPUP_PCB_DELETE_EDGE_ZONE:
    case ID_POPUP_PCB_DELETE_ZONE_LIMIT:
    case ID_POPUP_PCB_EDIT_ZONE:
    case ID_POPUP_PCB_DELETE_ZONE:
    case ID_POPUP_PCB_DELETE_TRACKSEG:
    case ID_POPUP_PCB_DELETE_TRACK:
    case ID_POPUP_PCB_DELETE_TRACKNET:
    case ID_POPUP_PCB_FILL_ZONE:
    case ID_POPUP_PCB_SELECT_NET_ZONE:
    case ID_POPUP_PCB_SELECT_LAYER:
    case ID_POPUP_PCB_SELECT_CU_LAYER:
    case ID_POPUP_PCB_SELECT_LAYER_PAIR:
    case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
    case ID_POPUP_PCB_SELECT_WIDTH:
    case ID_POPUP_PCB_SELECT_WIDTH1:
    case ID_POPUP_PCB_SELECT_WIDTH2:
    case ID_POPUP_PCB_SELECT_WIDTH3:
    case ID_POPUP_PCB_SELECT_WIDTH4:
    case ID_POPUP_PCB_SELECT_WIDTH5:
    case ID_POPUP_PCB_SELECT_WIDTH6:
    case ID_POPUP_PCB_SELECT_WIDTH7:
    case ID_POPUP_PCB_SELECT_WIDTH8:
    case ID_POPUP_PCB_SELECT_VIASIZE:
    case ID_POPUP_PCB_SELECT_VIASIZE1:
    case ID_POPUP_PCB_SELECT_VIASIZE2:
    case ID_POPUP_PCB_SELECT_VIASIZE3:
    case ID_POPUP_PCB_SELECT_VIASIZE4:
    case ID_POPUP_PCB_SELECT_VIASIZE5:
    case ID_POPUP_PCB_SELECT_VIASIZE6:
    case ID_POPUP_PCB_SELECT_VIASIZE7:
    case ID_POPUP_PCB_SELECT_VIASIZE8:
    case ID_POPUP_PCB_MOVE_TRACK_NODE:
    case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
    case ID_POPUP_PCB_BREAK_TRACK:
    case ID_POPUP_PCB_EDIT_NET:
    case ID_POPUP_PCB_EDIT_TRACK:
    case ID_POPUP_PCB_EDIT_TRACKSEG:
    case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
    case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
    case ID_POPUP_PCB_LOCK_ON_TRACK:
    case ID_POPUP_PCB_LOCK_OFF_TRACK:
    case ID_POPUP_PCB_LOCK_ON_NET:
    case ID_POPUP_PCB_LOCK_OFF_NET:
    case ID_POPUP_DELETE_BLOCK:
    case ID_POPUP_PLACE_BLOCK:
    case ID_POPUP_ZOOM_BLOCK:
    case ID_POPUP_INVERT_BLOCK:
    case ID_POPUP_ROTATE_BLOCK:
    case ID_POPUP_COPY_BLOCK:
    case ID_POPUP_PCB_VIA_EDITING:
    case ID_POPUP_PCB_VIA_HOLE_TO_DEFAULT:
    case ID_POPUP_PCB_VIA_HOLE_TO_VALUE:
    case ID_POPUP_PCB_VIA_HOLE_ENTER_VALUE:
    case ID_POPUP_PCB_VIA_HOLE_EXPORT:
    case ID_POPUP_PCB_VIA_HOLE_RESET_TO_DEFAULT:
    case ID_POPUP_PCB_VIA_HOLE_EXPORT_TO_OTHERS:
        break;

    case ID_POPUP_CANCEL_CURRENT_COMMAND:
        if( GetScreen()->ManageCurseur &&
                GetScreen()->ForceCloseManageCurseur )
        {
            GetScreen()->ForceCloseManageCurseur(this, &dc);
        }
        /* ne devrait pas etre execute, sauf bug */
        if (m_CurrentScreen->BlockLocate.m_Command != BLOCK_IDLE)
        {
            m_CurrentScreen->BlockLocate.m_Command = BLOCK_IDLE;
            m_CurrentScreen->BlockLocate.m_State = STATE_NO_BLOCK;
            m_CurrentScreen->BlockLocate.m_BlockDrawStruct = NULL;
        }
        if (m_ID_current_state == 0 )
            SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
        else SetCursor(DrawPanel->m_PanelCursor = DrawPanel->m_PanelDefaultCursor);
        break;

    default:	// Arret de la commande de déplacement en cours
        if( GetScreen()->ManageCurseur &&
                GetScreen()->ForceCloseManageCurseur )
        {
            GetScreen()->ForceCloseManageCurseur(this, &dc);
        }
        SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
        break;
    }

    switch ( id )	// Traitement des commandes
    {
    case ID_EXIT :
        Close(TRUE);
        break;

    case ID_OPEN_MODULE_EDITOR:
        if (m_Parent->m_ModuleEditFrame == NULL )
        {
            m_Parent->m_ModuleEditFrame = new WinEDA_ModuleEditFrame(this,
                    m_Parent,_("Module Editor"),
                    wxPoint(-1, -1), wxSize(600,400) );
            m_Parent->m_ModuleEditFrame->Show(TRUE);
            m_Parent->m_ModuleEditFrame->Zoom_Automatique(TRUE);
        }
        else m_Parent->m_ModuleEditFrame->Iconize(FALSE);
        break;

    case ID_NEW_PROJECT:
    case ID_LOAD_PROJECT:
        Files_io(event);
        break;

    case ID_PCB_GLOBAL_DELETE:
        InstallPcbGlobalDeleteFrame(pos);
        break;

    case ID_POPUP_PLACE_BLOCK:
        GetScreen()->BlockLocate.m_Command = BLOCK_MOVE;
        DrawPanel->m_AutoPAN_Request = FALSE;
        HandleBlockPlace(&dc);
        break;

    case ID_POPUP_COPY_BLOCK:
        GetScreen()->BlockLocate.m_Command = BLOCK_COPY;
        m_CurrentScreen->BlockLocate.SetMessageBlock(this);
        DrawPanel->m_AutoPAN_Request = FALSE;
        HandleBlockPlace(&dc);
        break;

    case ID_POPUP_ZOOM_BLOCK:
        GetScreen()->BlockLocate.m_Command = BLOCK_ZOOM;
        m_CurrentScreen->BlockLocate.SetMessageBlock(this);
        m_CurrentScreen->BlockLocate.SetMessageBlock(this);
        HandleBlockEnd(&dc);
        break;

    case ID_POPUP_DELETE_BLOCK:
        GetScreen()->BlockLocate.m_Command = BLOCK_DELETE;
        m_CurrentScreen->BlockLocate.SetMessageBlock(this);
        HandleBlockEnd(&dc);
        break;

    case ID_POPUP_ROTATE_BLOCK:
        GetScreen()->BlockLocate.m_Command = BLOCK_ROTATE;
        m_CurrentScreen->BlockLocate.SetMessageBlock(this);
        HandleBlockEnd(&dc);
        break;

    case ID_POPUP_INVERT_BLOCK:
        GetScreen()->BlockLocate.m_Command = BLOCK_INVERT;
        m_CurrentScreen->BlockLocate.SetMessageBlock(this);
        HandleBlockEnd(&dc);
        break;

    case ID_UNDO_BUTT:
        UnDeleteItem(&dc);
        break;

    case ID_DRC_CONTROL:
        Install_Test_DRC_Frame(&dc);
        break;

    case ID_GET_NETLIST:
        InstallNetlistFrame(&dc, wxPoint(-1,-1));
        break;

    case ID_GET_TOOLS:
//			InstallToolsFrame(this, wxPoint(-1,-1) );
        break;

    case ID_FIND_ITEMS:
        InstallFindFrame(pos, &dc);
        break;

    case ID_TRACK_BUTT:
        SetToolID( id, wxCURSOR_PENCIL, _("Add Tracks"));
        DisplayTrackSettings();
        if ( (m_Pcb->m_Status_Pcb & LISTE_CHEVELU_OK) == 0)
        {
            Compile_Ratsnest( &dc, TRUE );
        }
        break;

    case ID_PCB_ZONES_BUTT:
        SetToolID( id, wxCURSOR_PENCIL, _("Add Zones"));
        if ( ! DisplayOpt.DisplayZones )
            DisplayInfo(this, _("Warning: Display Zone is OFF!!!") );
        DelLimitesZone(&dc, TRUE);
        if( ! g_HightLigt_Status && (g_HightLigth_NetCode > 0 ) )
            Hight_Light(&dc);
        break;

    case ID_PCB_MIRE_BUTT:
        SetToolID( id, wxCURSOR_PENCIL, _("Add Mire"));
        break;

    case ID_PCB_PLACE_OFFSET_COORD_BUTT:
        SetToolID( id, wxCURSOR_PENCIL, _("Adjust Zero"));
        break;

    case ID_LINE_COMMENT_BUTT:
    case ID_PCB_ARC_BUTT:
    case ID_PCB_CIRCLE_BUTT:
        SetToolID( id, wxCURSOR_PENCIL, _("Add Graphic"));
        break;

    case ID_TEXT_COMMENT_BUTT:
        SetToolID( id, wxCURSOR_PENCIL, _("Add Text"));
        break;

    case ID_COMPONENT_BUTT:
        SetToolID( id, wxCURSOR_HAND, _("Add Modules"));
        break;

    case ID_PCB_COTATION_BUTT:
        SetToolID( id, wxCURSOR_PENCIL, _("Add Cotation"));
        break;

    case ID_NO_SELECT_BUTT:
        SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
        break;

    case ID_PCB_HIGHLIGHT_BUTT:
        SetToolID( id, wxCURSOR_HAND, _("Net Highlight"));
        break;

    case ID_PCB_SHOW_1_RATSNEST_BUTT:
        SetToolID( id, wxCURSOR_HAND, _("Local Ratsnest"));
        if ( (m_Pcb->m_Status_Pcb & LISTE_CHEVELU_OK) == 0)
            Compile_Ratsnest( &dc, TRUE );
        break;

    case ID_POPUP_CLOSE_CURRENT_TOOL:
        SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
        break;


    case ID_POPUP_CANCEL_CURRENT_COMMAND:
        break;

    case ID_POPUP_END_LINE:
        DrawPanel->MouseToCursorSchema();
//			EndSegment(&dc);
        break;

    case ID_POPUP_PCB_EDIT_TRACK:
        if ( CURRENT_ITEM == NULL) break;
        Edit_Track_Width(&dc, (TRACK *) CURRENT_ITEM);
        DrawPanel->MouseToCursorSchema();
        GetScreen()->SetModify();
        break;

    case ID_POPUP_PCB_EDIT_TRACKSEG:
        if ( CURRENT_ITEM == NULL) break;
        Edit_TrackSegm_Width(&dc, (TRACK *) CURRENT_ITEM);
        DrawPanel->MouseToCursorSchema();
        GetScreen()->SetModify();
        break;

    case ID_POPUP_PCB_EDIT_NET:
        if ( CURRENT_ITEM == NULL) break;
        Edit_Net_Width(&dc, ((TRACK *) CURRENT_ITEM)->m_NetCode);
        DrawPanel->MouseToCursorSchema();
        GetScreen()->SetModify();
        break;

    case ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE:
    case ID_POPUP_PCB_EDIT_ALL_VIAS_SIZE:
    case ID_POPUP_PCB_EDIT_ALL_TRACK_SIZE:
        if ( CURRENT_ITEM == NULL) break;
        {
            bool resize_vias = TRUE, resize_track = TRUE;
            if( id == ID_POPUP_PCB_EDIT_ALL_VIAS_SIZE) resize_track = FALSE;
            if( id == ID_POPUP_PCB_EDIT_ALL_TRACK_SIZE) resize_vias = FALSE;
            if ( Resize_Pistes_Vias(&dc, resize_track, resize_vias)) GetScreen()->SetModify();
        }
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_END_TRACK:
        DrawPanel->MouseToCursorSchema();
        End_Route( (TRACK *) CURRENT_ITEM, &dc);
        break;

    case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
        DrawPanel->MouseToCursorSchema();
        if ( CURRENT_ITEM->m_Flags & IS_DRAGGED )
        {
            PlaceDraggedTrackSegment((TRACK *) CURRENT_ITEM, &dc);
        }
        break;

    case ID_POPUP_PCB_PLACE_VIA:
        DrawPanel->MouseToCursorSchema();
        if ( CURRENT_ITEM->m_Flags & IS_DRAGGED )
        {
            PlaceDraggedTrackSegment((TRACK *) CURRENT_ITEM, &dc);
        }
        else
        {
            Other_Layer_Route( (TRACK *) CURRENT_ITEM, &dc);
            if ( DisplayOpt.ContrastModeDisplay )
                GetScreen()->SetRefreshReq();
        }
        break;


    case ID_POPUP_PCB_DELETE_TRACKSEG:
        DrawPanel->MouseToCursorSchema();
        GetScreen()->m_CurrentItem = Delete_Segment(&dc, (TRACK*)CURRENT_ITEM);
        GetScreen()->SetModify();
        break;

    case ID_POPUP_PCB_DELETE_TRACK:
        DrawPanel->MouseToCursorSchema();
        Delete_Track(&dc, (TRACK*)CURRENT_ITEM);
        GetScreen()->m_CurrentItem = NULL;
        GetScreen()->SetModify();
        break;

    case ID_POPUP_PCB_DELETE_TRACKNET:
        DrawPanel->MouseToCursorSchema();
        Delete_net(&dc, (TRACK*)CURRENT_ITEM);
        GetScreen()->m_CurrentItem = NULL;
        GetScreen()->SetModify();
        break;

    case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
        Attribut_Segment((TRACK*)CURRENT_ITEM, &dc, TRUE);
        break;

    case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
        Attribut_Segment((TRACK*)CURRENT_ITEM, &dc, FALSE);
        break;

    case ID_POPUP_PCB_LOCK_ON_TRACK:
        Attribut_Track((TRACK*)CURRENT_ITEM, &dc, TRUE);
        break;

    case ID_POPUP_PCB_LOCK_OFF_TRACK:
        Attribut_Track((TRACK*)CURRENT_ITEM, &dc, FALSE);
        break;

    case ID_POPUP_PCB_LOCK_ON_NET:
        Attribut_net(&dc, ((TRACK*)CURRENT_ITEM)->m_NetCode, TRUE);
        break;

    case ID_POPUP_PCB_LOCK_OFF_NET:
        Attribut_net(&dc, ((TRACK*)CURRENT_ITEM)->m_NetCode, FALSE);
        break;

    case ID_POPUP_PCB_SETFLAGS_TRACK_MNU:
        break;

    case ID_POPUP_PCB_DELETE_ZONE:
        DrawPanel->MouseToCursorSchema();
        if ( CURRENT_ITEM == NULL) break;
        Delete_Zone(&dc, (SEGZONE*)CURRENT_ITEM);
        GetScreen()->m_CurrentItem = NULL;
        break;

    case ID_POPUP_PCB_EDIT_ZONE:
        DrawPanel->MouseToCursorSchema();
        if ( CURRENT_ITEM == NULL) break;
        Edit_Zone_Width(&dc, (SEGZONE*)CURRENT_ITEM);
        break;

    case ID_POPUP_PCB_DELETE_ZONE_LIMIT:
        DrawPanel->MouseToCursorSchema();
        DelLimitesZone(&dc, TRUE);
        break;

    case ID_PCB_DELETE_ITEM_BUTT:
        SetToolID( id, wxCURSOR_BULLSEYE, _("Delete item"));
        break;

    case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
        Process_Move_Item(this, CURRENT_ITEM, &dc);
        DrawPanel->m_AutoPAN_Request = TRUE;
        break;

    case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
        g_Drag_Pistes_On = TRUE;
    case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
        // If the current Item is a pad, text module ...: Get the parent
        if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
            CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
        if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
        {
            g_Drag_Pistes_On = FALSE;
            break;
        }
        DrawPanel->MouseToCursorSchema();
        StartMove_Module( (MODULE*)CURRENT_ITEM, &dc);
        break;

    case ID_POPUP_PCB_DELETE_MODULE:
        DrawPanel->MouseToCursorSchema();
        // If the current Item is a pad, text module ...: Get the parent
        if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
            CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
        if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
            break;
        if ( Delete_Module((MODULE*) CURRENT_ITEM, &dc) )
        {
            GetScreen()->m_CurrentItem = NULL;
        }
        break;

    case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
        DrawPanel->MouseToCursorSchema();
        // If the current Item is a pad, text module ...: Get the parent
        if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
            CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
        if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
            break;
        Rotate_Module(&dc, (MODULE*)CURRENT_ITEM, -900, TRUE);
        break;

    case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
        DrawPanel->MouseToCursorSchema();
        // If the current Item is a pad, text module ...: Get the parent
        if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
            CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
        if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
            break;
        Rotate_Module(&dc, (MODULE*)CURRENT_ITEM, 900, TRUE);
        break;

    case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
        DrawPanel->MouseToCursorSchema();
        // If the current Item is a pad, text module ...: Get the parent
        if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
            CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
        if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
            break;
        Change_Side_Module((MODULE *) CURRENT_ITEM, &dc);
        break;

    case ID_POPUP_PCB_EDIT_MODULE:
        // If the current Item is a pad, text module ...: Get the parent
        if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
            CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
        if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
            break;
        InstallModuleOptionsFrame((MODULE *)CURRENT_ITEM,
                                  &dc, pos);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_DRAG_PAD_REQUEST:
        g_Drag_Pistes_On = TRUE;
    case ID_POPUP_PCB_MOVE_PAD_REQUEST:
        DrawPanel->MouseToCursorSchema();
        StartMovePad((D_PAD *)CURRENT_ITEM, &dc);
        break;

    case ID_POPUP_PCB_EDIT_PAD:
        InstallPadOptionsFrame((D_PAD *)CURRENT_ITEM,
                               &dc, pos);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
        DrawPanel->MouseToCursorSchema();
        Import_Pad_Settings((D_PAD *)CURRENT_ITEM, &dc);
        break;

    case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
        DrawPanel->MouseToCursorSchema();
        Global_Import_Pad_Settings((D_PAD *)CURRENT_ITEM, &dc);
        break;

    case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
        DrawPanel->MouseToCursorSchema();
        Export_Pad_Settings((D_PAD *)CURRENT_ITEM);
        break;


    case ID_POPUP_PCB_DELETE_PAD:
        DeletePad((D_PAD *)CURRENT_ITEM, &dc);
        GetScreen()->m_CurrentItem = NULL;
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_EDIT_TEXTMODULE:
        InstallTextModOptionsFrame((TEXTE_MODULE *)CURRENT_ITEM,
                                   &dc, pos);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
        DrawPanel->MouseToCursorSchema();
        StartMoveTexteModule( (TEXTE_MODULE *) CURRENT_ITEM,
                              &dc);
        break;

    case ID_POPUP_PCB_ROTATE_TEXTMODULE:
        RotateTextModule((TEXTE_MODULE *)CURRENT_ITEM,
                         &dc);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_DELETE_TEXTMODULE:
        DeleteTextModule((TEXTE_MODULE *)CURRENT_ITEM,
                         &dc);
        GetScreen()->m_CurrentItem = NULL;
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_SELECT_LAYER:
        itmp = SelectLayer(GetScreen()->m_Active_Layer, -1, -1);
        if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
        itmp = SelectLayer(GetScreen()->m_Active_Layer, CMP_N+1, -1);
        if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_SELECT_CU_LAYER:
        itmp = SelectLayer(GetScreen()->m_Active_Layer, -1, CMP_N);
        if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
        break;

    case ID_POPUP_PCB_SELECT_LAYER_PAIR:
        SelectLayerPair();
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_TOOLBARH_PCB_SELECT_LAYER:
        itmp = m_SelLayerBox->GetChoice();
        GetScreen()->m_Active_Layer = (int)((size_t) m_SelLayerBox->GetClientData(itmp));
        if ( DisplayOpt.ContrastModeDisplay ) DrawPanel->Refresh(TRUE);
        break;

    case ID_POPUP_PCB_EDIT_TEXTEPCB:
        InstallTextPCBOptionsFrame((TEXTE_PCB *)CURRENT_ITEM,
                                   &dc, pos);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_ROTATE_TEXTEPCB:
        Rotate_Texte_Pcb((TEXTE_PCB *)CURRENT_ITEM, &dc);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_DELETE_TEXTEPCB:
        Delete_Texte_Pcb((TEXTE_PCB *)CURRENT_ITEM, &dc);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
        StartMove_Mire((MIREPCB *)CURRENT_ITEM, &dc);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_EDIT_MIRE:
        InstallMireOptionsFrame((MIREPCB *)CURRENT_ITEM, &dc, pos);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_DELETE_MIRE:
        DrawPanel->MouseToCursorSchema();
        Delete_Mire((MIREPCB *)CURRENT_ITEM, &dc);
        GetScreen()->m_CurrentItem = NULL;
        break;

    case ID_POPUP_PCB_DELETE_COTATION:
        DrawPanel->MouseToCursorSchema();
        Delete_Cotation((COTATION*)CURRENT_ITEM, &dc);
        GetScreen()->m_CurrentItem = NULL;
        break;

    case ID_POPUP_PCB_EDIT_COTATION:
        Install_Edit_Cotation((COTATION*)CURRENT_ITEM, &dc, pos);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_DELETE_DRAWING:
        Delete_Segment_Edge((DRAWSEGMENT *)CURRENT_ITEM, &dc);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_DELETE_DRAWING_LAYER:
        Delete_Drawings_All_Layer((DRAWSEGMENT *)CURRENT_ITEM, &dc);
        GetScreen()->m_CurrentItem = NULL;
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_EDIT_DRAWING:
        Drawing_SetNewWidth((DRAWSEGMENT *)CURRENT_ITEM, &dc);
        DrawPanel->MouseToCursorSchema();
        break;

    case ID_POPUP_PCB_MOVE_DRAWING_REQUEST:
        DrawPanel->MouseToCursorSchema();
        Start_Move_DrawItem((DRAWSEGMENT *)CURRENT_ITEM, &dc);
        break;

    case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
        DrawPanel->MouseToCursorSchema();
        if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
        {
            End_Edge( (DRAWSEGMENT *)CURRENT_ITEM, &dc);
            GetScreen()->m_CurrentItem = NULL;
        }
        break;

    case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
        DrawPanel->MouseToCursorSchema();
        if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
        {
            End_Zone(&dc);
            GetScreen()->m_CurrentItem = NULL;
        }
        break;

    case ID_POPUP_PCB_DELETE_EDGE_ZONE:
        DrawPanel->MouseToCursorSchema();
        if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
        {
            GetScreen()->m_CurrentItem = Del_SegmEdgeZone(&dc,
                                         (EDGE_ZONE *) CURRENT_ITEM);
        }
        break;

    case ID_POPUP_PCB_FILL_ZONE:
        DrawPanel->MouseToCursorSchema();
        Fill_Zone(&dc);
        break;

    case ID_POPUP_PCB_SELECT_NET_ZONE:
        DrawPanel->MouseToCursorSchema();
        CaptureNetName(&dc);
        break;

    case ID_POPUP_PCB_SELECT_WIDTH:
        break;

    case ID_AUX_TOOLBAR_PCB_TRACK_WIDTH:
    {
        int ii = m_SelTrackWidthBox->GetChoice();
        g_DesignSettings.m_CurrentTrackWidth = g_DesignSettings.m_TrackWidhtHistory[ii];
        DisplayTrackSettings();
        m_SelTrackWidthBox_Changed = FALSE;
        m_SelViaSizeBox_Changed = FALSE;
    }
    break;
    case ID_POPUP_PCB_SELECT_WIDTH1:
    case ID_POPUP_PCB_SELECT_WIDTH2:
    case ID_POPUP_PCB_SELECT_WIDTH3:
    case ID_POPUP_PCB_SELECT_WIDTH4:
    case ID_POPUP_PCB_SELECT_WIDTH5:
    case ID_POPUP_PCB_SELECT_WIDTH6:
    case ID_POPUP_PCB_SELECT_WIDTH7:
    case ID_POPUP_PCB_SELECT_WIDTH8:
        DrawPanel->MouseToCursorSchema();
        {
            int ii = id - ID_POPUP_PCB_SELECT_WIDTH1;
            g_DesignSettings.m_CurrentTrackWidth = g_DesignSettings.m_TrackWidhtHistory[ii];
            DisplayTrackSettings();
        }
        break;

    case ID_POPUP_PCB_SELECT_VIASIZE:
        break;

    case ID_AUX_TOOLBAR_PCB_VIA_SIZE:
    {
        int ii = m_SelViaSizeBox->GetChoice();
        g_DesignSettings.m_CurrentViaSize = g_DesignSettings.m_ViaSizeHistory[ii];
        DisplayTrackSettings();
        m_SelTrackWidthBox_Changed = FALSE;
        m_SelViaSizeBox_Changed = FALSE;
    }
    break;

    case ID_POPUP_PCB_SELECT_VIASIZE1:
    case ID_POPUP_PCB_SELECT_VIASIZE2:
    case ID_POPUP_PCB_SELECT_VIASIZE3:
    case ID_POPUP_PCB_SELECT_VIASIZE4:
    case ID_POPUP_PCB_SELECT_VIASIZE5:
    case ID_POPUP_PCB_SELECT_VIASIZE6:
    case ID_POPUP_PCB_SELECT_VIASIZE7:
    case ID_POPUP_PCB_SELECT_VIASIZE8:
    case ID_POPUP_PCB_VIA_EDITING:
    case ID_POPUP_PCB_VIA_HOLE_TO_DEFAULT:
    case ID_POPUP_PCB_VIA_HOLE_TO_VALUE:
    case ID_POPUP_PCB_VIA_HOLE_ENTER_VALUE:
    case ID_POPUP_PCB_VIA_HOLE_EXPORT:
    case ID_POPUP_PCB_VIA_HOLE_RESET_TO_DEFAULT:
    case ID_POPUP_PCB_VIA_HOLE_EXPORT_TO_OTHERS:
        Via_Edit_Control(&dc, id, (SEGVIA *) GetScreen()->m_CurrentItem);
        break;

    case ID_POPUP_PCB_MOVE_TRACK_NODE:
        DrawPanel->MouseToCursorSchema();
        Start_MoveOneTrackSegment((TRACK *) GetScreen()->m_CurrentItem,
                                  &dc, TRUE);
        break;

    case ID_POPUP_PCB_BREAK_TRACK:
        DrawPanel->MouseToCursorSchema();
        {
            TRACK * track = (TRACK *) GetScreen()->m_CurrentItem;
            wxPoint pos = GetScreen()->m_Curseur;
            track->Draw(DrawPanel, &dc, GR_XOR);
            TRACK * newtrack = CreateLockPoint(&pos.x, &pos.y, track, NULL);
            track->Draw(DrawPanel, &dc, GR_XOR);
            newtrack->Draw(DrawPanel, &dc, GR_XOR);
        }
        break;

    case ID_MENU_PCB_CLEAN:
        Clean_Pcb(&dc);
        break;

    case ID_MENU_PCB_SWAP_LAYERS:
        Swap_Layers(event);
        break;

    case ID_POPUP_PCB_AUTOROUTE_GET_AUTOROUTER:
        GlobalRoute(&dc);
        break;

    case ID_POPUP_PCB_AUTOROUTE_GET_AUTOROUTER_DATA:
        ReadAutoroutedTracks(&dc);
        break;

    case ID_PCB_USER_GRID_SETUP:
        InstallGridFrame(pos);
        break;

    case ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC:
    {
        wxString msg = FindKicadHelpPath();
        msg += EDA_Appl->m_EDA_CommonConfig->Read(wxT("module_doc_file"),
                wxT("pcbnew/footprints.pdf"));
        GetAssociatedDocument(this, wxEmptyString, msg);
    }
    break;

    case ID_MENU_ARCHIVE_NEW_MODULES:
        Archive_Modules(wxEmptyString, TRUE);
        break;

    case ID_MENU_ARCHIVE_ALL_MODULES:
        Archive_Modules(wxEmptyString, FALSE);
        break;

    default:
    {
        DisplayError(this, wxT("WinEDA_PcbFrame::Process_Special_Functions() id error"));
        break;
    }
    }

    SetToolbars();
}
/* Handles the selection of tools, menu, and popup menu commands.
 */
void GERBVIEW_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
    int           id = event.GetId();

    switch( id )
    {
    case wxID_CUT:
    case wxID_COPY:
    case ID_POPUP_DELETE_BLOCK:
    case ID_POPUP_PLACE_BLOCK:
    case ID_POPUP_ZOOM_BLOCK:
        break;

    case ID_POPUP_CANCEL_CURRENT_COMMAND:
        m_canvas->EndMouseCapture();

        if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE )
        {
            /* Should not be executed, except bug */
            GetScreen()->m_BlockLocate.SetCommand( BLOCK_IDLE );
            GetScreen()->m_BlockLocate.SetState( STATE_NO_BLOCK );
            GetScreen()->m_BlockLocate.ClearItemsList();
        }

        if( GetToolId() == ID_NO_TOOL_SELECTED )
            SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
        else
            m_canvas->SetCursor( (wxStockCursor) m_canvas->GetCurrentCursor() );
        break;

    default:
        m_canvas->EndMouseCapture();
        break;
    }

    INSTALL_UNBUFFERED_DC( dc, m_canvas );

    switch( id )
    {
    case ID_GERBVIEW_SET_PAGE_BORDER:
        {
            DIALOG_PAGE_SHOW_PAGE_BORDERS dlg( this );

            if( dlg.ShowModal() == wxID_OK )
                m_canvas->Refresh();
        }
        break;

    case ID_GERBVIEW_GLOBAL_DELETE:
        Erase_Current_DrawLayer( true );
        ClearMsgPanel();
        break;

    case ID_NO_TOOL_SELECTED:
        SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
        break;

    case ID_POPUP_CLOSE_CURRENT_TOOL:
        SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
        break;

    case ID_POPUP_CANCEL_CURRENT_COMMAND:
        break;

    case ID_GERBVIEW_SHOW_LIST_DCODES:
        Liste_D_Codes();
        break;

    case ID_POPUP_PLACE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
        m_canvas->SetAutoPanRequest( false );
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_ZOOM_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_DELETE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    default:
        wxFAIL_MSG( wxT( "GERBVIEW_FRAME::Process_Special_Functions error" ) );
        break;
    }
}
Esempio n. 11
0
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
    int        id = event.GetId();
    wxPoint    pos;

    INSTALL_UNBUFFERED_DC( dc, m_canvas );

    wxGetMousePosition( &pos.x, &pos.y );

    pos.y += 20;

    switch( id )
    {
    case wxID_CUT:
    case wxID_COPY:
    case ID_TOOLBARH_PCB_SELECT_LAYER:
    case ID_MODEDIT_PAD_SETTINGS:
    case ID_PCB_USER_GRID_SETUP:
    case ID_POPUP_PCB_ROTATE_TEXTEPCB:
    case ID_POPUP_PCB_EDIT_TEXTEPCB:
    case ID_POPUP_PCB_ROTATE_TEXTMODULE:
    case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
    case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
    case ID_POPUP_PCB_EDIT_TEXTMODULE:
    case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
    case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
    case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
    case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
    case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
    case ID_POPUP_PCB_DELETE_EDGE:
    case ID_POPUP_PCB_DELETE_TEXTMODULE:
    case ID_POPUP_PCB_DELETE_PAD:
    case ID_POPUP_DELETE_BLOCK:
    case ID_POPUP_PLACE_BLOCK:
    case ID_POPUP_ZOOM_BLOCK:
    case ID_POPUP_MIRROR_X_BLOCK:
    case ID_POPUP_ROTATE_BLOCK:
    case ID_POPUP_COPY_BLOCK:
        break;

    case ID_POPUP_CANCEL_CURRENT_COMMAND:
    default:
        if( m_canvas->IsMouseCaptured() )
        {
            //  for all other commands: stop the move in progress
            m_canvas->CallEndMouseCapture( &dc );
        }

        if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
            SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );

        break;
    }

    switch( id )
    {
    case ID_EXIT:
        Close( true );
        break;

    case ID_MODEDIT_SELECT_CURRENT_LIB:
        {
            wxString library = SelectLibrary( GetCurrentLib() );

            if( library.size() )
            {
                Prj().SetRString( PROJECT::PCB_LIB_NICKNAME, library );
                updateTitle();
            }
        }
        break;

    case ID_OPEN_MODULE_VIEWER:
        {
            FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );

            if( !viewer )
            {
                viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
                viewer->Show( true );
                viewer->Zoom_Automatique( false );
            }
            else
            {
                // On Windows, Raise() does not bring the window on screen, when iconized
                if( viewer->IsIconized() )
                    viewer->Iconize( false );

                viewer->Raise();

                // Raising the window does not set the focus on Linux.  This should work on
                // any platform.
                if( wxWindow::FindFocus() != viewer )
                    viewer->SetFocus();
            }
        }
        break;

    case ID_MODEDIT_DELETE_PART:
        DeleteModuleFromCurrentLibrary();
        break;

    case ID_MODEDIT_NEW_MODULE:
        {
            if( !Clear_Pcb( true ) )
                break;

            SetCrossHairPosition( wxPoint( 0, 0 ) );

            MODULE* module = CreateNewModule( wxEmptyString );

            if( module )        // i.e. if create module command not aborted
            {
                // Initialize data relative to nets and netclasses (for a new
                // module the defaults are used)
                // This is mandatory to handle and draw pads
                GetBoard()->BuildListOfNets();
                module->SetPosition( wxPoint( 0, 0 ) );

                if( GetBoard()->m_Modules )
                    GetBoard()->m_Modules->ClearFlags();

                Zoom_Automatique( false );
            }

            updateView();
            m_canvas->Refresh();

            GetScreen()->ClrModify();
        }
        break;

    case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
        {
            if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
            {
                if( !IsOK( this,
                           _( "Current Footprint will be lost and this operation cannot be undone. Continue ?" ) ) )
                    break;
            }

            FOOTPRINT_WIZARD_FRAME* wizard = (FOOTPRINT_WIZARD_FRAME*) Kiway().Player(
                        FRAME_PCB_FOOTPRINT_WIZARD_MODAL, true );

            if( wizard->ShowModal( NULL, this ) )
            {
                // Creates the new footprint from python script wizard
                MODULE* module = wizard->GetBuiltFootprint();

                if( module == NULL )        // i.e. if create module command aborted
                    break;

                Clear_Pcb( false );

                SetCrossHairPosition( wxPoint( 0, 0 ) );

                //  Add the new object to board
                GetBoard()->Add( module, ADD_APPEND );

                // Initialize data relative to nets and netclasses (for a new
                // module the defaults are used)
                // This is mandatory to handle and draw pads
                GetBoard()->BuildListOfNets();
                module->SetPosition( wxPoint( 0, 0 ) );
                module->ClearFlags();

                Zoom_Automatique( false );
                updateView();
                m_canvas->Refresh();

                if( m_Draw3DFrame )
                    m_Draw3DFrame->NewDisplay();

                GetScreen()->ClrModify();
            }

            wizard->Destroy();
        }
        break;

    case ID_MODEDIT_SAVE_LIBMODULE:
        if( GetBoard()->m_Modules && GetCurrentLib().size() )
        {
            SaveFootprintInLibrary( GetCurrentLib(), GetBoard()->m_Modules, true, true );
            GetScreen()->ClrModify();
        }
        break;

    case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
    case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
        {
            // update module in the current board,
            // not just add it to the board with total disregard for the netlist...
            PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );

            if( pcbframe == NULL )      // happens when the board editor is not active (or closed)
            {
                wxMessageBox( _("No board currently edited" ) );
                break;
            }

            BOARD*          mainpcb  = pcbframe->GetBoard();
            MODULE*         source_module  = NULL;
            MODULE*         module_in_edit = GetBoard()->m_Modules;

            // Search the old module (source) if exists
            // Because this source could be deleted when editing the main board...
            if( module_in_edit->GetLink() )        // this is not a new module ...
            {
                source_module = mainpcb->m_Modules;

                for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
                {
                    if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
                        break;
                }
            }

            if( ( source_module == NULL )
              && ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
            {
                wxString msg;
                msg.Printf( _( "Unable to find the footprint source on the main board" ) );
                msg << _( "\nCannot update the footprint" );
                DisplayError( this, msg );
                break;
            }

            if( ( source_module != NULL )
              && ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
            {
                wxString msg;
                msg.Printf( _( "A footprint source was found on the main board" ) );
                msg << _( "\nCannot insert this footprint" );
                DisplayError( this, msg );
                break;
            }

            m_toolManager->RunAction( COMMON_ACTIONS::selectionClear, true );

            // Create the "new" module
            MODULE* newmodule = new MODULE( *module_in_edit );
            newmodule->SetParent( mainpcb );
            newmodule->SetLink( 0 );

            // Put the footprint in the main pcb linked list.
            mainpcb->Add( newmodule );

            if( source_module )         // this is an update command
            {
                // In the main board,
                // the new module replace the old module (pos, orient, ref, value
                // and connexions are kept)
                // and the source_module (old module) is deleted
                PICKED_ITEMS_LIST pickList;

                if( pcbframe->IsGalCanvasActive() )
                {
                    KIGFX::VIEW* view = pcbframe->GetGalCanvas()->GetView();
                    source_module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
                    view->Remove( source_module );
                }

                pcbframe->Exchange_Module( source_module, newmodule, &pickList );
                newmodule->SetTimeStamp( module_in_edit->GetLink() );

                if( pickList.GetCount() )
                    pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
            }
            else        // This is an insert command
            {
                wxPoint cursor_pos = pcbframe->GetCrossHairPosition();

                pcbframe->SetCrossHairPosition( wxPoint( 0, 0 ) );
                pcbframe->PlaceModule( newmodule, NULL );
                newmodule->SetPosition( wxPoint( 0, 0 ) );
                pcbframe->SetCrossHairPosition( cursor_pos );
                newmodule->SetTimeStamp( GetNewTimeStamp() );
                pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
            }

            newmodule->ClearFlags();
            GetScreen()->ClrModify();
            pcbframe->SetCurItem( NULL );
            mainpcb->m_Status_Pcb = 0;

            if( pcbframe->IsGalCanvasActive() )
            {
                RN_DATA* ratsnest = pcbframe->GetBoard()->GetRatsnest();
                ratsnest->Update( newmodule );
                ratsnest->Recalculate();

                KIGFX::VIEW* view = pcbframe->GetGalCanvas()->GetView();
                newmodule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
                view->Add( newmodule );
                pcbframe->GetGalCanvas()->ForceRefresh();
            }
        }
        break;

    case ID_MODEDIT_IMPORT_PART:
        if( ! Clear_Pcb( true ) )
            break;                  // //this command is aborted

        SetCrossHairPosition( wxPoint( 0, 0 ) );
        Import_Module();

        if( GetBoard()->m_Modules )
            GetBoard()->m_Modules->ClearFlags();

        GetScreen()->ClrModify();
        Zoom_Automatique( false );
        m_canvas->Refresh();

        if( m_Draw3DFrame )
            m_Draw3DFrame->NewDisplay();

        break;

    case ID_MODEDIT_EXPORT_PART:
        if( GetBoard()->m_Modules )
            Export_Module( GetBoard()->m_Modules );
        break;

    case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
        if( GetBoard()->m_Modules )
        {
            // CreateModuleLibrary() only creates a new library, does not save footprint
            wxString libPath = CreateNewLibrary();
            if( libPath.size() )
                SaveCurrentModule( &libPath );
        }
        break;

    case ID_MODEDIT_SHEET_SET:
        break;

    case ID_MODEDIT_LOAD_MODULE:
        wxLogDebug( wxT( "Loading module from library " ) + getLibPath() );

        if( ! Clear_Pcb( true ) )
            break;

        SetCrossHairPosition( wxPoint( 0, 0 ) );

        LoadModuleFromLibrary( GetCurrentLib(), Prj().PcbFootprintLibs(), true );

        if( GetBoard() && GetBoard()->m_Modules )
        {
            GetBoard()->m_Modules->ClearFlags();

            // if either m_Reference or m_Value are gone, reinstall them -
            // otherwise you cannot see what you are doing on board
            TEXTE_MODULE* ref = &GetBoard()->m_Modules->Reference();
            TEXTE_MODULE* val = &GetBoard()->m_Modules->Value();

            if( val && ref )
            {
                ref->SetType( TEXTE_MODULE::TEXT_is_REFERENCE );    // just in case ...

                if( ref->GetLength() == 0 )
                    ref->SetText( wxT( "Ref**" ) );

                val->SetType( TEXTE_MODULE::TEXT_is_VALUE );        // just in case ...

                if( val->GetLength() == 0 )
                    val->SetText( wxT( "Val**" ) );
            }
        }

        Zoom_Automatique( false );

        if( m_Draw3DFrame )
            m_Draw3DFrame->NewDisplay();

        GetScreen()->ClrModify();

        updateView();
        m_canvas->Refresh();

        break;

    case ID_MODEDIT_PAD_SETTINGS:
        InstallPadOptionsFrame( NULL );
        break;

    case ID_MODEDIT_CHECK:
        // Currently: not implemented
        break;

    case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
        if( GetBoard()->m_Modules )
        {
            SetCurItem( GetBoard()->m_Modules );

            DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );

            int ret = dialog.ShowModal();
            GetScreen()->GetCurItem()->ClearFlags();
            GetBoard()->m_Modules.GetFirst()->ViewUpdate();

            if( ret > 0 )
                m_canvas->Refresh();
        }
        break;

    case ID_POPUP_CLOSE_CURRENT_TOOL:
        break;

    case ID_POPUP_CANCEL_CURRENT_COMMAND:
        break;

    case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
        m_canvas->MoveCursorToCrossHair();
        Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
        m_canvas->Refresh();
        break;

    case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
        m_canvas->MoveCursorToCrossHair();
        Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
        m_canvas->Refresh();
        break;

    case ID_POPUP_PCB_EDIT_MODULE_PRMS:
        {
            DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
            dialog.ShowModal();
            GetScreen()->GetCurItem()->ClearFlags();
            m_canvas->MoveCursorToCrossHair();
            m_canvas->Refresh();
        }
        break;

    case ID_POPUP_PCB_MOVE_PAD_REQUEST:
        m_canvas->MoveCursorToCrossHair();
        StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
        break;

    case ID_POPUP_PCB_EDIT_PAD:
        InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
        m_canvas->MoveCursorToCrossHair();
    break;

    case ID_POPUP_PCB_DELETE_PAD:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
        SetCurItem( NULL );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_DUPLICATE_ITEM:
        duplicateItems( false );
        break;

    case ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT:
        duplicateItems( true );
        break;

    case ID_POPUP_PCB_MOVE_EXACT:
        moveExact();
        break;

    case ID_POPUP_PCB_CREATE_ARRAY:
        createArray();
        break;

    case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        m_canvas->MoveCursorToCrossHair();
        Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
        break;

    case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        // Calls the global change dialog:
        DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
        m_canvas->MoveCursorToCrossHair();
        Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
        break;

    case ID_POPUP_PCB_EDIT_TEXTMODULE:
        InstallTextModOptionsFrame( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
        m_canvas->MoveCursorToCrossHair();
        StartMoveTexteModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
        break;

    case ID_POPUP_PCB_ROTATE_TEXTMODULE:
        RotateTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_DELETE_TEXTMODULE:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        DeleteTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ) );
        SetCurItem( NULL );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_MOVE_EDGE:
        Start_Move_EdgeMod( static_cast<EDGE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
        m_canvas->MoveCursorToCrossHair();

        if( GetScreen()->GetCurItem()->IsNew() )
        {
            End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
            SetCurItem( NULL );
        }
        break;

    case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
        {
            EDGE_MODULE* edge = NULL;

            if( GetScreen()->GetCurItem()
              && ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
            {
                edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
            }

            Enter_Edge_Width( edge );
            m_canvas->MoveCursorToCrossHair();

            if( edge )
                m_canvas->Refresh();
        }
        break;

    case  ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
        m_canvas->MoveCursorToCrossHair();
        InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
        m_canvas->Refresh();
        break;

    case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
        m_canvas->MoveCursorToCrossHair();
        Edit_Edge_Width( NULL );
        m_canvas->Refresh();
        break;

    case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
        m_canvas->MoveCursorToCrossHair();
        Edit_Edge_Layer( NULL );
        m_canvas->Refresh();
        break;

    case ID_POPUP_PCB_DELETE_EDGE:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        m_canvas->MoveCursorToCrossHair();
        RemoveStruct( GetScreen()->GetCurItem() );
        SetCurItem( NULL );
        break;

    case ID_MODEDIT_MODULE_ROTATE:
    case ID_MODEDIT_MODULE_MIRROR:
    case ID_MODEDIT_MODULE_MOVE_EXACT:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        Transform( (MODULE*) GetScreen()->GetCurItem(), id );
        m_canvas->Refresh();
        break;

    case ID_PCB_DRAWINGS_WIDTHS_SETUP:
        InstallOptionsFrame( pos );
        break;

    case ID_PCB_PAD_SETUP:
        {
            BOARD_ITEM* item = GetCurItem();

            if( item )
            {
                if( item->Type() != PCB_PAD_T )
                    item = NULL;
            }

            InstallPadOptionsFrame( (D_PAD*) item );
        }
        break;

    case ID_PCB_USER_GRID_SETUP:
        InvokeDialogGrid();
        break;

    case ID_POPUP_PLACE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
        m_canvas->SetAutoPanRequest( false );
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_COPY_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        m_canvas->SetAutoPanRequest( false );
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_ZOOM_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_DELETE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_ROTATE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_MIRROR_X_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_MOVE_BLOCK_EXACT:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE_EXACT );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_GEN_IMPORT_DXF_FILE:
        if( GetBoard()->m_Modules )
        {
            InvokeDXFDialogModuleImport( this, GetBoard()->m_Modules );
            m_canvas->Refresh();
        }
        break;

    default:
        DisplayError( this,
                      wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
        break;
    }
}
Esempio n. 12
0
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
    int        id = event.GetId();
    wxPoint    pos;
    bool       redraw = false;

    INSTALL_UNBUFFERED_DC( dc, m_canvas );

    wxGetMousePosition( &pos.x, &pos.y );

    pos.y += 20;

    switch( id )
    {
    case wxID_CUT:
    case wxID_COPY:
    case ID_TOOLBARH_PCB_SELECT_LAYER:
    case ID_MODEDIT_PAD_SETTINGS:
    case ID_PCB_USER_GRID_SETUP:
    case ID_POPUP_PCB_ROTATE_TEXTEPCB:
    case ID_POPUP_PCB_EDIT_TEXTEPCB:
    case ID_POPUP_PCB_ROTATE_TEXTMODULE:
    case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
    case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
    case ID_POPUP_PCB_EDIT_TEXTMODULE:
    case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
    case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
    case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
    case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
    case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
    case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
    case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
    case ID_POPUP_PCB_DELETE_EDGE:
    case ID_POPUP_PCB_DELETE_TEXTMODULE:
    case ID_POPUP_PCB_DELETE_PAD:
    case ID_POPUP_DELETE_BLOCK:
    case ID_POPUP_PLACE_BLOCK:
    case ID_POPUP_ZOOM_BLOCK:
    case ID_POPUP_MIRROR_X_BLOCK:
    case ID_POPUP_ROTATE_BLOCK:
    case ID_POPUP_COPY_BLOCK:
        break;

    case ID_POPUP_CANCEL_CURRENT_COMMAND:
    default:
        if( m_canvas->IsMouseCaptured() )
        {
            //  for all other commands: stop the move in progress
            m_canvas->CallEndMouseCapture( &dc );
        }

        if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
            SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );

        break;
    }

    switch( id )
    {
    case ID_EXIT:
        Close( true );
        break;

    case ID_MODEDIT_SELECT_CURRENT_LIB:
        Select_Active_Library();
        break;

    case ID_OPEN_MODULE_VIEWER:
        {
            FOOTPRINT_VIEWER_FRAME * viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer();
            if( viewer == NULL )
            {
                viewer = new FOOTPRINT_VIEWER_FRAME( this, NULL );
                viewer->Show( true );
                viewer->Zoom_Automatique( false );
            }
            else
            {
                if( viewer->IsIconized() )
                     viewer->Iconize( false );

                viewer->Raise();

                // Raising the window does not set the focus on Linux.  This should work on
                // any platform.
                if( wxWindow::FindFocus() != viewer )
                    viewer->SetFocus();
            }
        }
        break;

    case ID_MODEDIT_DELETE_PART:
        DeleteModuleFromCurrentLibrary();
        break;

    case ID_MODEDIT_NEW_MODULE:
        {
            Clear_Pcb( true );
            GetScreen()->ClearUndoRedoList();
            SetCurItem( NULL );
            GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );

            MODULE* module = Create_1_Module( wxEmptyString );

            if( module )        // i.e. if create module command not aborted
            {
                // Initialize data relative to nets and netclasses (for a new
                // module the defaults are used)
                // This is mandatory to handle and draw pads
                GetBoard()->BuildListOfNets();
                redraw = true;
                module->SetPosition( wxPoint( 0, 0 ) );

                if( GetBoard()->m_Modules )
                    GetBoard()->m_Modules->ClearFlags();

                Zoom_Automatique( false );
            }
        }
        break;

    case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
        {
            Clear_Pcb( true );
            GetScreen()->ClearUndoRedoList();
            SetCurItem( NULL );
            GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );

            wxSemaphore semaphore( 0, 1 );
            FOOTPRINT_WIZARD_FRAME *wizard = new FOOTPRINT_WIZARD_FRAME( this, &semaphore,
                                KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
            wizard->Show( true );
            wizard->Zoom_Automatique( false );

            while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
            {
                wxYield();
                wxMilliSleep( 50 );
            }

            MODULE* module = wizard->GetBuiltFootprint();

            if( module )        // i.e. if create module command not aborted
            {
                /* Here we should make a copy of the object before adding to board*/
                module->SetParent( (EDA_ITEM*)GetBoard() );
                GetBoard()->m_Modules.Append( module );

                // Initialize data relative to nets and netclasses (for a new
                // module the defaults are used)
                // This is mandatory to handle and draw pads
                GetBoard()->BuildListOfNets();
                redraw = true;
                module->SetPosition( wxPoint( 0, 0 ) );

                if( GetBoard()->m_Modules )
                    GetBoard()->m_Modules->ClearFlags();


            }

            wizard->Destroy();
        }
        break;

    case ID_MODEDIT_SAVE_LIBMODULE:
        if( GetBoard()->m_Modules && getLibPath() != wxEmptyString )
        {
            Save_Module_In_Library( getLibPath(), GetBoard()->m_Modules, true, true );
            GetScreen()->ClrModify();
        }
        break;

    case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
    case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
        {
            // update module in the current board,
            // not just add it to the board with total disregard for the netlist...
            PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) GetParent();
            BOARD*          mainpcb  = pcbframe->GetBoard();
            MODULE*         source_module  = NULL;
            MODULE*         module_in_edit = GetBoard()->m_Modules;

            // Search the old module (source) if exists
            // Because this source could be deleted when editing the main board...
            if( module_in_edit->m_Link )        // this is not a new module ...
            {
                source_module = mainpcb->m_Modules;

                for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
                {
                    if( module_in_edit->m_Link == source_module->GetTimeStamp() )
                        break;
                }
            }

            if( ( source_module == NULL )
                && ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
            {
                wxString msg;
                msg.Printf( _( "Unable to find the footprint source on the main board" ) );
                msg << _( "\nCannot update the footprint" );
                DisplayError( this, msg );
                break;
            }

            if( ( source_module != NULL )
                && ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
            {
                wxString msg;
                msg.Printf( _( "A footprint source was found on the main board" ) );
                msg << _( "\nCannot insert this footprint" );
                DisplayError( this, msg );
                break;
            }

            // Create the "new" module
            MODULE* newmodule = new MODULE( *module_in_edit );
            newmodule->SetParent( mainpcb );
            newmodule->m_Link = 0;

            // Put the footprint in the main pcb linked list.
            mainpcb->Add( newmodule );

            if( source_module )         // this is an update command
            {
                // In the main board,
                // the new module replace the old module (pos, orient, ref, value
                // and connexions are kept)
                // and the source_module (old module) is deleted
                PICKED_ITEMS_LIST pickList;
                pcbframe->Exchange_Module( source_module, newmodule, &pickList );
                newmodule->SetTimeStamp( module_in_edit->m_Link );

                if( pickList.GetCount() )
                    pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
            }
            else        // This is an insert command
            {
                wxPoint cursor_pos = pcbframe->GetScreen()->GetCrossHairPosition();
                pcbframe->GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
                pcbframe->PlaceModule( newmodule, NULL );
                pcbframe->GetScreen()->SetCrossHairPosition( cursor_pos );
                newmodule->SetTimeStamp( GetNewTimeStamp() );
                pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
            }

            newmodule->ClearFlags();
            GetScreen()->ClrModify();
            pcbframe->SetCurItem( NULL );
            mainpcb->m_Status_Pcb = 0;
        }
        break;

    case ID_MODEDIT_IMPORT_PART:
        if( ! Clear_Pcb( true ) )
            break;                  // //this command is aborted

        GetScreen()->ClearUndoRedoList();
        SetCurItem( NULL );
        GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
        Import_Module();
        redraw = true;

        if( GetBoard()->m_Modules )
            GetBoard()->m_Modules->ClearFlags();

        GetScreen()->ClrModify();
        Zoom_Automatique( false );

        if( m_Draw3DFrame )
            m_Draw3DFrame->NewDisplay();

        break;

    case ID_MODEDIT_EXPORT_PART:
        if( GetBoard()->m_Modules )
            Export_Module( GetBoard()->m_Modules );
        break;

    case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
        if( GetBoard()->m_Modules )
        {
            // CreateModuleLibrary() only creates a new library, does not save footprint
            wxString libPath = CreateNewLibrary();
            if( libPath.size() )
                SaveCurrentModule( &libPath );
        }
        break;

    case ID_MODEDIT_SHEET_SET:
        break;

    case ID_MODEDIT_LOAD_MODULE:
        {
            wxString libPath = getLibPath();    // might be empty

            wxLogDebug( wxT( "Loading module from library " ) + libPath );

            GetScreen()->ClearUndoRedoList();
            SetCurItem( NULL );
            Clear_Pcb( true );
            GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
            Load_Module_From_Library( libPath, true );
            redraw = true;
        }

        if( GetBoard()->m_Modules )
            GetBoard()->m_Modules->ClearFlags();

        // if either m_Reference or m_Value are gone, reinstall them -
        // otherwise you cannot see what you are doing on board
        if( GetBoard() && GetBoard()->m_Modules )
        {
            TEXTE_MODULE* ref = GetBoard()->m_Modules->m_Reference;
            TEXTE_MODULE* val = GetBoard()->m_Modules->m_Value;

            if( val && ref )
            {
                ref->SetType( TEXT_is_REFERENCE );    // just in case ...

                if( ref->m_Text.Length() == 0 )
                    ref->m_Text = L"Ref**";

                val->SetType( TEXT_is_VALUE );        // just in case ...

                if( val->m_Text.Length() == 0 )
                    val->m_Text = L"Val**";
            }
        }

        GetScreen()->ClrModify();
        Zoom_Automatique( false );

        if( m_Draw3DFrame )
            m_Draw3DFrame->NewDisplay();

        break;

    case ID_MODEDIT_PAD_SETTINGS:
        InstallPadOptionsFrame( NULL );
        break;

    case ID_MODEDIT_CHECK:
        break;

    case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
        if( GetBoard()->m_Modules )
        {
            SetCurItem( GetBoard()->m_Modules );
            DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()-> GetCurItem() );
            int ret = dialog.ShowModal();
            GetScreen()->GetCurItem()->ClearFlags();

            if( ret > 0 )
                m_canvas->Refresh();
        }
        break;

    case ID_POPUP_CLOSE_CURRENT_TOOL:
        break;

    case ID_POPUP_CANCEL_CURRENT_COMMAND:
        break;

    case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
        m_canvas->MoveCursorToCrossHair();
        Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
        redraw = true;
        break;

    case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
        m_canvas->MoveCursorToCrossHair();
        Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
        redraw = true;
        break;

    case ID_POPUP_PCB_EDIT_MODULE:
        {
            DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
            int ret = dialog.ShowModal();
            GetScreen()->GetCurItem()->ClearFlags();
            GetScreen()->GetCurItem()->ClearFlags();
            m_canvas->MoveCursorToCrossHair();

            if( ret > 0 )
                m_canvas->Refresh();
        }
        break;

    case ID_POPUP_PCB_MOVE_PAD_REQUEST:
        m_canvas->MoveCursorToCrossHair();
        StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
        break;

    case ID_POPUP_PCB_EDIT_PAD:
        InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
        m_canvas->MoveCursorToCrossHair();
    break;

    case ID_POPUP_PCB_DELETE_PAD:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
        SetCurItem( NULL );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        m_canvas->MoveCursorToCrossHair();
        Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
        break;

    case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        // Calls the global change dialog:
        DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
        m_canvas->MoveCursorToCrossHair();
        Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
        break;

    case ID_POPUP_PCB_EDIT_TEXTMODULE:
        InstallTextModOptionsFrame( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
        m_canvas->MoveCursorToCrossHair();
        StartMoveTexteModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
        break;

    case ID_POPUP_PCB_ROTATE_TEXTMODULE:
        RotateTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_DELETE_TEXTMODULE:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        DeleteTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem() );
        SetCurItem( NULL );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_MOVE_EDGE:
        Start_Move_EdgeMod( (EDGE_MODULE*) GetScreen()->GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
        m_canvas->MoveCursorToCrossHair();

        if( GetScreen()->GetCurItem()->IsNew() )
        {
            End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
            SetCurItem( NULL );
        }
        break;

    case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
        {
            EDGE_MODULE* edge = NULL;
            if( GetScreen()->GetCurItem()
              && ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
            {
                edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
            }

            Enter_Edge_Width( edge );
            m_canvas->MoveCursorToCrossHair();

            if( edge )
                m_canvas->Refresh();
        }
        break;

    case  ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
        m_canvas->MoveCursorToCrossHair();
        InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
        m_canvas->Refresh();
        break;

    case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
        m_canvas->MoveCursorToCrossHair();
        Edit_Edge_Width( (EDGE_MODULE*) GetScreen()->GetCurItem() );
        m_canvas->Refresh();
        break;

    case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
        m_canvas->MoveCursorToCrossHair();
        Edit_Edge_Width( NULL );
        m_canvas->Refresh();
        break;

    case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
        m_canvas->MoveCursorToCrossHair();
        Edit_Edge_Layer( (EDGE_MODULE*) GetScreen()->GetCurItem() );
        m_canvas->Refresh();
        break;

    case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
        m_canvas->MoveCursorToCrossHair();
        Edit_Edge_Layer( NULL );
        m_canvas->Refresh();
        break;

    case ID_POPUP_PCB_DELETE_EDGE:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        m_canvas->MoveCursorToCrossHair();
        RemoveStruct( GetScreen()->GetCurItem() );
        SetCurItem( NULL );
        break;

    case ID_MODEDIT_MODULE_ROTATE:
    case ID_MODEDIT_MODULE_MIRROR:
        SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
        Transform( (MODULE*) GetScreen()->GetCurItem(), id );
        redraw = true;
        break;

    case ID_PCB_DRAWINGS_WIDTHS_SETUP:
        InstallOptionsFrame( pos );
        break;

    case ID_PCB_PAD_SETUP:
        {
            BOARD_ITEM* item = GetCurItem();

            if( item )
            {
                if( item->Type() != PCB_PAD_T )
                    item = NULL;
            }

            InstallPadOptionsFrame( (D_PAD*) item );
        }
        break;

    case ID_PCB_USER_GRID_SETUP:
        InstallGridFrame( pos );
        break;

    case ID_POPUP_PLACE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
        m_canvas->SetAutoPanRequest( false );
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_COPY_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        m_canvas->SetAutoPanRequest( false );
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_ZOOM_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_DELETE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_ROTATE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_MIRROR_X_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    default:
        DisplayError( this,
                      wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
        break;
    }

    if( redraw )
        m_canvas->Refresh();
}
Esempio n. 13
0
void SCH_EDIT_FRAME::OnRotate( wxCommandEvent& aEvent )
{
    SCH_SCREEN* screen = GetScreen();
    SCH_ITEM*   item = screen->GetCurItem();

    INSTALL_UNBUFFERED_DC( dc, m_canvas );

    // Allows block rotate operation on hot key.
    if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
    {
        screen->m_BlockLocate.SetCommand( BLOCK_ROTATE );
        HandleBlockEnd( &dc );
        return;
    }

    if( item == NULL )
    {
        // If we didn't get here by a hot key, then something has gone wrong.
        if( aEvent.GetInt() == 0 )
            return;

        EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();

        wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );

        item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::RotatableItems,
                                  aEvent.GetInt() );

        // Exit if no item found at the current location or the item is already being edited.
        if( (item == NULL) || (item->GetFlags() != 0) )
            return;
    }

    switch( item->Type() )
    {
    case SCH_COMPONENT_T:
        {
            SCH_COMPONENT* component = static_cast<SCH_COMPONENT*>( item );
            if( aEvent.GetId() == ID_SCH_ROTATE_CLOCKWISE )
                OrientComponent( CMP_ROTATE_CLOCKWISE );
            else if( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE )
                OrientComponent( CMP_ROTATE_COUNTERCLOCKWISE );
            else
                wxFAIL_MSG( wxT( "Unknown rotate item command ID." ) );

            if( m_autoplaceFields )
                component->AutoAutoplaceFields( GetScreen() );

            m_canvas->Refresh();

            break;
        }

    case SCH_TEXT_T:
    case SCH_LABEL_T:
    case SCH_GLOBAL_LABEL_T:
    case SCH_HIERARCHICAL_LABEL_T:
        m_canvas->MoveCursorToCrossHair();
        ChangeTextOrient( (SCH_TEXT*) item );
        m_canvas->Refresh();
        break;

    case SCH_FIELD_T:
        m_canvas->MoveCursorToCrossHair();
        RotateField( (SCH_FIELD*) item );
        if( item->GetParent()->Type() == SCH_COMPONENT_T )
        {
            // Now that we're moving a field, they're no longer autoplaced.
            SCH_COMPONENT *parent = static_cast<SCH_COMPONENT*>( item->GetParent() );
            parent->ClearFieldsAutoplaced();
        }
        m_canvas->Refresh();
        break;

    case SCH_BITMAP_T:
        RotateImage( (SCH_BITMAP*) item );
        break;

    case SCH_SHEET_T:
        if( !item->IsNew() )    // rotate a sheet during its creation has no sense
        {
            bool retCCW = ( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE );
            RotateHierarchicalSheet( static_cast<SCH_SHEET*>( item ), retCCW );
        }

        break;

    case SCH_JUNCTION_T:
    case SCH_NO_CONNECT_T:
        // these items are not rotated, because rotation does not change them.
        break;

    default:
        // Other items (wires...) cannot be rotated, at least during creation
        if( item->IsNew() )
            break;

        wxFAIL_MSG( wxString::Format( wxT( "Cannot rotate schematic item type %s." ),
                                      GetChars( item->GetClass() ) ) );
    }

    if( item->GetFlags() == 0 )
        screen->SetCurItem( NULL );
}
Esempio n. 14
0
void SCH_EDIT_FRAME::OnDragItem( wxCommandEvent& aEvent )
{
    SCH_SCREEN* screen = GetScreen();
    SCH_ITEM* item = screen->GetCurItem();

    // The easiest way to handle a menu or a hot key drag command
    // is to simulate a block drag command
    //
    // When a drag item is requested, some items use a BLOCK_DRAG_ITEM drag type
    // an some items use a BLOCK_DRAG drag type  (mainly a junction)
    // a BLOCK_DRAG collects all items in a block (here a 2x2 rect centered on the cursor)
    // and BLOCK_DRAG_ITEM drag only the selected item
    BLOCK_COMMAND_T dragType = BLOCK_DRAG_ITEM;

    if( item == NULL )
    {
        // If we didn't get here by a hot key, then something has gone wrong.
        if( aEvent.GetInt() == 0 )
            return;

        EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();

        wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );

        item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::DraggableItems,
                                  aEvent.GetInt() );

        // Exit if no item found at the current location or the item is already being edited.
        if( (item == NULL) || (item->GetFlags() != 0) )
            return;

        // When a junction or a node is found, a BLOCK_DRAG is better
        if( m_collectedItems.IsCorner() || m_collectedItems.IsNode( false )
            || m_collectedItems.IsDraggableJunction() )
            dragType = BLOCK_DRAG;
    }

    switch( item->Type() )
    {
    case SCH_BUS_BUS_ENTRY_T:
    case SCH_BUS_WIRE_ENTRY_T:
    case SCH_LINE_T:
    case SCH_JUNCTION_T:
    case SCH_COMPONENT_T:
    case SCH_LABEL_T:
    case SCH_GLOBAL_LABEL_T:
    case SCH_HIERARCHICAL_LABEL_T:
    case SCH_SHEET_T:
        m_canvas->MoveCursorToCrossHair();

        if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
        {
            INSTALL_UNBUFFERED_DC( dc, m_canvas );

            if( !HandleBlockBegin( &dc, dragType, GetCrossHairPosition() ) )
                break;

            // Give a non null size to the search block:
            screen->m_BlockLocate.Inflate( 1 );
            HandleBlockEnd( &dc );
        }

        break;

    default:
        wxFAIL_MSG( wxString::Format( wxT( "Cannot drag schematic item type %s." ),
                                      GetChars( item->GetClass() ) ) );
    }
}
Esempio n. 15
0
// Handles the selection of command events.
void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
    int         id = event.GetId();
    LAYER_NUM itmp;
    INSTALL_UNBUFFERED_DC( dc, m_canvas );
    MODULE* module;

    m_canvas->CrossHairOff( &dc );

    switch( id )   // Some (not all ) edit commands must be finished or aborted
    {
    case wxID_CUT:
    case wxID_COPY:
    case ID_PCB_USER_GRID_SETUP:
    case ID_TOOLBARH_PCB_SELECT_LAYER:
    case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
    case ID_POPUP_PCB_ROTATE_TEXTEPCB:
    case ID_POPUP_PCB_FLIP_TEXTEPCB:
    case ID_POPUP_PCB_COPY_TEXTEPCB:
    case ID_POPUP_PCB_EDIT_TEXTEPCB:
    case ID_POPUP_PCB_EDIT_MIRE:
    case ID_POPUP_PCB_ROTATE_TEXTMODULE:
    case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
    case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
    case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
    case ID_POPUP_PCB_EDIT_MODULE_PRMS:
    case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
    case ID_POPUP_PCB_EDIT_TEXTMODULE:
    case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
    case ID_POPUP_PCB_BEGIN_TRACK:
    case ID_POPUP_PCB_END_TRACK:
    case ID_POPUP_PCB_PLACE_THROUGH_VIA:
    case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
    case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
    case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
    case ID_POPUP_PCB_PLACE_MICROVIA:
    case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
    case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
    case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
    case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
    case ID_POPUP_PCB_FILL_ALL_ZONES:
    case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES:
    case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
    case ID_POPUP_PCB_PLACE_ZONE_CORNER:
    case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
    case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
    case ID_POPUP_PCB_DELETE_ZONE:
    case ID_POPUP_PCB_MOVE_ZONE_CORNER:
    case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
    case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
    case ID_POPUP_PCB_ADD_ZONE_CORNER:
    case ID_POPUP_PCB_DELETE_TRACKSEG:
    case ID_POPUP_PCB_DELETE_TRACK:
    case ID_POPUP_PCB_DELETE_TRACKNET:
    case ID_POPUP_PCB_FILL_ZONE:
    case ID_POPUP_PCB_SELECT_LAYER:
    case ID_POPUP_PCB_SELECT_CU_LAYER:
    case ID_POPUP_PCB_SELECT_LAYER_PAIR:
    case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
    case ID_POPUP_PCB_MOVE_TRACK_NODE:
    case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
    case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
    case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
    case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
    case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
    case ID_POPUP_PCB_BREAK_TRACK:
    case ID_POPUP_PCB_EDIT_NET:
    case ID_POPUP_PCB_EDIT_TRACK:
    case ID_POPUP_PCB_EDIT_TRACKSEG:
    case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
    case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
    case ID_POPUP_PCB_LOCK_ON_TRACK:
    case ID_POPUP_PCB_LOCK_OFF_TRACK:
    case ID_POPUP_PCB_LOCK_ON_NET:
    case ID_POPUP_PCB_LOCK_OFF_NET:
    case ID_POPUP_DELETE_BLOCK:
    case ID_POPUP_PLACE_BLOCK:
    case ID_POPUP_ZOOM_BLOCK:
    case ID_POPUP_FLIP_BLOCK:
    case ID_POPUP_ROTATE_BLOCK:
    case ID_POPUP_COPY_BLOCK:
    case ID_POPUP_PCB_EDIT_DRAWING:
    case ID_POPUP_PCB_GETINFO_MARKER:
    case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
    case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
    case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
    case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
    case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
        break;

    case ID_POPUP_CANCEL_CURRENT_COMMAND:
        if( m_canvas->IsMouseCaptured() )
        {
            m_canvas->EndMouseCapture();
        }

        // Should not be executed, just in case
        if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE )
        {
            GetScreen()->m_BlockLocate.SetCommand( BLOCK_IDLE );
            GetScreen()->m_BlockLocate.SetState( STATE_NO_BLOCK );
            GetScreen()->m_BlockLocate.ClearItemsList();
        }

        if( GetToolId() == ID_NO_TOOL_SELECTED )
            SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
        else
            SetCursor( (wxStockCursor) m_canvas->GetDefaultCursor() );

        break;

    default:        // Finish (abort) the command
        if( m_canvas->IsMouseCaptured() )
            m_canvas->CallEndMouseCapture( &dc );

        if( GetToolId() != id )
        {
            if( m_lastDrawToolId != GetToolId() )
                m_lastDrawToolId = GetToolId();

            SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
        }
        break;
    }

    switch( id )   // Execute command
    {
    case 0:
        break;

    case ID_OPEN_MODULE_EDITOR:
        {
            FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, false );

            if( !editor )
            {
                editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );

                editor->Show( true );
                editor->Zoom_Automatique( false );
            }
            else
            {
                /* not needed on linux, other platforms need this?
                if( editor->IsIconized() )
                     editor->Iconize( false );
                */

                editor->Raise();

                // Raising the window does not set the focus on Linux.  This should work on
                // any platform.
                if( wxWindow::FindFocus() != editor )
                    editor->SetFocus();
            }
        }
        break;

    case ID_OPEN_MODULE_VIEWER:
        {
            FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );

            if( !viewer )
            {
                viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );

                viewer->Show( true );
                viewer->Zoom_Automatique( false );
            }
            else
            {
                /* not needed on linux, other platforms need this?
                if( viewer->IsIconized() )
                     viewer->Iconize( false );
                */

                viewer->Raise();

                // Raising the window does not set the focus on Linux.  This should work on
                // any platform.
                if( wxWindow::FindFocus() != viewer )
                    viewer->SetFocus();
            }
        }
        break;

    case ID_PCB_GLOBAL_DELETE:
        InstallPcbGlobalDeleteFrame( wxDefaultPosition );
        break;

    case ID_POPUP_PLACE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
        m_canvas->SetAutoPanRequest( false );
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_COPY_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        m_canvas->SetAutoPanRequest( false );
        HandleBlockPlace( &dc );
        break;

    case ID_POPUP_ZOOM_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_DELETE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_ROTATE_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_POPUP_FLIP_BLOCK:
        GetScreen()->m_BlockLocate.SetCommand( BLOCK_FLIP );
        GetScreen()->m_BlockLocate.SetMessageBlock( this );
        HandleBlockEnd( &dc );
        break;

    case ID_DRC_CONTROL:
        m_drc->ShowDialog();
        break;

    case ID_GET_NETLIST:
        InstallNetlistFrame( &dc );
        break;

    case ID_FIND_ITEMS:
        InstallFindFrame();
        break;

    case ID_POPUP_CLOSE_CURRENT_TOOL:
        SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
        break;

    case ID_POPUP_CANCEL_CURRENT_COMMAND:
        break;

    case ID_POPUP_PCB_END_LINE:
        m_canvas->MoveCursorToCrossHair();

        //  EndSegment(&dc);
        break;

    case ID_POPUP_PCB_EDIT_TRACK:
        if( GetCurItem() == NULL )
            break;
        Edit_Track_Width( &dc, (TRACK*) GetCurItem() );
        m_canvas->MoveCursorToCrossHair();
        OnModify();
        break;

    case ID_POPUP_PCB_EDIT_TRACKSEG:
        if( GetCurItem() == NULL )
            break;
        Edit_TrackSegm_Width( &dc, (TRACK*) GetCurItem() );
        m_canvas->MoveCursorToCrossHair();
        OnModify();
        break;

    case ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE:
        if( GetCurItem() == NULL )
            break;
        {
        int type = GetCurItem()->Type();

        if( type == PCB_TRACE_T || type == PCB_VIA_T )
        {
            BOARD_CONNECTED_ITEM*item = (BOARD_CONNECTED_ITEM*) GetCurItem();
            DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS dlg( this, item->GetNetCode() );
            dlg.ShowModal();
        }

        }
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_BEGIN_TRACK:
        m_canvas->MoveCursorToCrossHair();
        OnHotkeyBeginRoute( &dc );
        break;

    case ID_POPUP_PCB_END_TRACK:
        m_canvas->MoveCursorToCrossHair();
        End_Route( (TRACK*) GetCurItem(), &dc );
        break;

    case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
        m_canvas->MoveCursorToCrossHair();

        if( GetCurItem()->IsDragging() )
        {
            PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
        }

        break;

    case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
        /* change the position of initial segment when creating new tracks
         * switch from _/  to -\ .
         * If a track is in progress, it will be redrawn
        */
        if( m_canvas->IsMouseCaptured() )
            m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );

        g_Alternate_Track_Posture = !g_Alternate_Track_Posture;

        if( m_canvas->IsMouseCaptured() )
            m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );

        break;

    case ID_POPUP_PCB_PLACE_MICROVIA:
        if( !IsMicroViaAcceptable() )
            break;
        // fall through
    case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
    case ID_POPUP_PCB_PLACE_THROUGH_VIA:
    case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
    case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
        m_canvas->MoveCursorToCrossHair();

        if( GetCurItem()->IsDragging() )
        {
            PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
        }
        else
        {
            BOARD_DESIGN_SETTINGS &settings = GetDesignSettings();
            VIATYPE_T v_type = settings.m_CurrentViaType;
            switch( id )
            {
            case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
            case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
                settings.m_CurrentViaType = VIA_BLIND_BURIED;
                break;

            case ID_POPUP_PCB_PLACE_MICROVIA:
                settings.m_CurrentViaType = VIA_MICROVIA;
                break;

            default:
                settings.m_CurrentViaType = VIA_THROUGH;
                break;
            }

            // place via and switch layer.
            if( id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA ||
                id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA )
            {
                m_canvas->SetIgnoreMouseEvents( true );
                wxPoint dlgPosition;
                wxGetMousePosition( &dlgPosition.x, &dlgPosition.y );
                LAYER_NUM layer = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS,
                                               dlgPosition );
                m_canvas->SetIgnoreMouseEvents( false );
                m_canvas->MoveCursorToCrossHair();

                if( getActiveLayer() != layer )
                {
                    GetScreen()->m_Route_Layer_TOP    = getActiveLayer();
                    GetScreen()->m_Route_Layer_BOTTOM = layer;
                    Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
                }
            }

            else
                Other_Layer_Route( (TRACK*) GetCurItem(), &dc );

            settings.m_CurrentViaType = v_type;

            if( DisplayOpt.ContrastModeDisplay )
                m_canvas->Refresh();
        }
        break;

    case ID_POPUP_PCB_DELETE_TRACKSEG:
        if( GetCurItem() == NULL )
            break;

        m_canvas->MoveCursorToCrossHair();
        SetCurItem( Delete_Segment( &dc, (TRACK*) GetCurItem() ) );
        OnModify();
        break;

    case ID_POPUP_PCB_DELETE_TRACK:
        if( GetCurItem() == NULL )
            break;
        m_canvas->MoveCursorToCrossHair();
        Delete_Track( &dc, (TRACK*) GetCurItem() );
        SetCurItem( NULL );
        OnModify();
        break;

    case ID_POPUP_PCB_DELETE_TRACKNET:
        m_canvas->MoveCursorToCrossHair();
        Delete_net( &dc, (TRACK*) GetCurItem() );
        SetCurItem( NULL );
        OnModify();
        break;

    case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
        Attribut_Segment( (TRACK*) GetCurItem(), &dc, true );
        break;

    case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
        Attribut_Segment( (TRACK*) GetCurItem(), &dc, false );
        break;

    case ID_POPUP_PCB_LOCK_ON_TRACK:
        Attribut_Track( (TRACK*) GetCurItem(), &dc, true );
        break;

    case ID_POPUP_PCB_LOCK_OFF_TRACK:
        Attribut_Track( (TRACK*) GetCurItem(), &dc, false );
        break;

    case ID_POPUP_PCB_LOCK_ON_NET:
        Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), true );
        break;

    case ID_POPUP_PCB_LOCK_OFF_NET:
        Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), false );
        break;

    case ID_POPUP_PCB_SETFLAGS_TRACK_MNU:
        break;

    case ID_POPUP_PCB_DELETE_ZONE:
        m_canvas->MoveCursorToCrossHair();

        if( GetCurItem() == NULL )
            break;

        {
            SEGZONE* zsegm   = (SEGZONE*) GetCurItem();
            int      netcode = zsegm->GetNetCode();
            Delete_OldZone_Fill( zsegm );
            SetCurItem( NULL );
            TestNetConnection( NULL, netcode );
            OnModify();
            SetMsgPanel( GetBoard() );
        }
        break;

    case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
        Edit_Zone_Params( &dc, (ZONE_CONTAINER*) GetCurItem() );
        SetCurItem( NULL ); // Outlines can have changed
        break;

    case ID_POPUP_PCB_ZONE_DUPLICATE:
    {
        ZONE_CONTAINER* zone = (ZONE_CONTAINER*) GetCurItem();
        duplicateZone( &dc, zone );
    }
    break;

    case ID_POPUP_PCB_ZONE_ADD_SIMILAR_ZONE:
        m_canvas->MoveCursorToCrossHair();
        m_canvas->SetAutoPanRequest( true );
        Add_Similar_Zone( &dc, (ZONE_CONTAINER*) GetCurItem() );
        break;

    case ID_POPUP_PCB_ZONE_ADD_CUTOUT_ZONE:
        m_canvas->MoveCursorToCrossHair();
        m_canvas->SetAutoPanRequest( true );
        Add_Zone_Cutout( &dc, (ZONE_CONTAINER*) GetCurItem() );
        break;

    case ID_POPUP_PCB_DELETE_ZONE_CONTAINER:
    case ID_POPUP_PCB_DELETE_ZONE_CUTOUT:
        m_canvas->MoveCursorToCrossHair();
        {
            int netcode = ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode();
            Delete_Zone_Contour( &dc, (ZONE_CONTAINER*) GetCurItem() );
            SetCurItem( NULL );
            TestNetConnection( NULL, netcode );
            SetMsgPanel( GetBoard() );
        }
        break;

    case ID_POPUP_PCB_DELETE_ZONE_CORNER:
        Remove_Zone_Corner( &dc, (ZONE_CONTAINER*) GetCurItem() );
        SetCurItem( NULL );
        break;

    case ID_POPUP_PCB_MOVE_ZONE_CORNER:
    {
        m_canvas->MoveCursorToCrossHair();
        ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
        m_canvas->SetAutoPanRequest( true );
        Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), false );
        break;
    }

    case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
    {
        m_canvas->MoveCursorToCrossHair();
        ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
        m_canvas->SetAutoPanRequest( true );
        Start_Move_Zone_Drag_Outline_Edge( &dc, zone_cont, zone_cont->GetSelectedCorner() );
        break;
    }

    case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
    {
        m_canvas->MoveCursorToCrossHair();
        ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
        m_canvas->SetAutoPanRequest( true );
        Start_Move_Zone_Outlines( &dc, zone_cont );
        break;
    }

    case ID_POPUP_PCB_ADD_ZONE_CORNER:
    {
        m_canvas->MoveCursorToCrossHair();
        ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
        wxPoint         pos = GetCrossHairPosition();

        /* add corner between zone_cont->m_CornerSelection
         * and zone_cont->m_CornerSelection+1
         * and start move the new corner
         */
        zone_cont->Draw( m_canvas, &dc, GR_XOR );
        zone_cont->Outline()->InsertCorner( zone_cont->GetSelectedCorner(), pos.x, pos.y );
        zone_cont->SetSelectedCorner( zone_cont->GetSelectedCorner() + 1 );
        zone_cont->Draw( m_canvas, &dc, GR_XOR );
        m_canvas->SetAutoPanRequest( true );
        Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), true );
        break;
    }

    case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
    case ID_POPUP_PCB_PLACE_ZONE_CORNER:
    {
        m_canvas->MoveCursorToCrossHair();
        ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
        End_Move_Zone_Corner_Or_Outlines( &dc, zone_cont );
        m_canvas->SetAutoPanRequest( false );
        break;
    }

    case ID_POPUP_PCB_FILL_ALL_ZONES:
        m_canvas->MoveCursorToCrossHair();
        Fill_All_Zones( this );
        m_canvas->Refresh();
        SetMsgPanel( GetBoard() );
        break;

    case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
        if( ( GetCurItem() )->Type() == PCB_ZONE_AREA_T )
        {
            ZONE_CONTAINER* zone_container = (ZONE_CONTAINER*) GetCurItem();
            zone_container->UnFill();
            TestNetConnection( NULL, zone_container->GetNetCode() );
            OnModify();
            SetMsgPanel( GetBoard() );
            m_canvas->Refresh();
        }
        SetCurItem( NULL );
        break;

    case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES: // Remove all zones :
        GetBoard()->m_Zone.DeleteAll();                 // remove zone segments used to fill zones.

        for( int ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
        {
            // Remove filled areas in zone
            ZONE_CONTAINER* zone_container = GetBoard()->GetArea( ii );
            zone_container->ClearFilledPolysList();
        }

        SetCurItem( NULL );        // CurItem might be deleted by this command, clear the pointer
        TestConnections();
        TestForActiveLinksInRatsnest( 0 );   // Recalculate the active ratsnest, i.e. the unconnected links
        OnModify();
        SetMsgPanel( GetBoard() );
        m_canvas->Refresh();
        break;

    case ID_POPUP_PCB_FILL_ZONE:
        m_canvas->MoveCursorToCrossHair();
        Fill_Zone( (ZONE_CONTAINER*) GetCurItem() );
        TestNetConnection( NULL, ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode() );
        SetMsgPanel( GetBoard() );
        m_canvas->Refresh();
        break;

    case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
        StartMoveTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
        m_canvas->SetAutoPanRequest( true );
        break;

    case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
    case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
        if( GetCurItem() == NULL )
            break;

        // If the current Item is a pad, text module ...: Get its parent
        if( GetCurItem()->Type() != PCB_MODULE_T )
            SetCurItem( GetCurItem()->GetParent() );

        if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
            break;

        module = (MODULE*) GetCurItem();

        if( module->IsLocked() )
        {
            wxString msg;
            msg.Printf( _( "Footprint %s found, but it is locked" ),
                        module->GetReference().GetData() );
            DisplayInfoMessage( this, msg );
            break;
        }

        SendMessageToEESCHEMA( module );
        SetCrossHairPosition( module->GetPosition() );
        m_canvas->MoveCursorToCrossHair();
        StartMoveModule( module, &dc, id == ID_POPUP_PCB_DRAG_MODULE_REQUEST );
        break;

    case ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST:      // get module by name and move it
        SetCurItem( GetModuleByName() );
        module = (MODULE*) GetCurItem();

        if( module == NULL )
            break;

        if( module->IsLocked() )
        {
            wxString msg = wxString::Format(
                _( "Footprint %s found, but it is locked" ),
                module->GetReference().GetData() );
            DisplayInfoMessage( this, msg );
            break;
        }

        SendMessageToEESCHEMA( module );
        m_canvas->MoveCursorToCrossHair();
        StartMoveModule( module, &dc, false );
        break;

    case ID_POPUP_PCB_DELETE_MODULE:
        m_canvas->MoveCursorToCrossHair();

        // If the current Item is a pad, text module ...: Get its parent
        if( GetCurItem()->Type() != PCB_MODULE_T )
            SetCurItem( GetCurItem()->GetParent() );

        if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
            break;

        module = (MODULE*) GetCurItem();

        if( module->IsLocked() )
        {
            wxString msg;
            msg.Printf( _( "Footprint %s found, but it is locked" ),
                        module->GetReference().GetData() );
            DisplayInfoMessage( this, msg );
            break;
        }

        if( Delete_Module( (MODULE*) GetCurItem(), &dc, true ) )
        {
            SetCurItem( NULL );
        }

        break;

    case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
        m_canvas->MoveCursorToCrossHair();

        // If the current Item is a pad, text module ...: Get its parent
        if( GetCurItem()->Type() != PCB_MODULE_T )
            SetCurItem( GetCurItem()->GetParent() );

        if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
            break;

        module = (MODULE*) GetCurItem();

        if( module->IsLocked() )
        {
            wxString msg;
            msg.Printf( _( "Footprint %s found, but it is locked" ),
                        module->GetReference().GetData() );
            DisplayInfoMessage( this, msg );
            break;
        }

        // This is a simple rotation, no other editing in progress
        if( !GetCurItem()->IsMoving() )
            SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );

        Rotate_Module( &dc, (MODULE*) GetCurItem(), m_rotationAngle, true );
        break;

    case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
        m_canvas->MoveCursorToCrossHair();

        // If the current Item is a pad, text module ...: Get its parent
        if( GetCurItem()->Type() != PCB_MODULE_T )
            SetCurItem( GetCurItem()->GetParent() );

        if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
            break;

        module = (MODULE*) GetCurItem();

        if( module->IsLocked() )
        {
            wxString msg;
            msg.Printf( _( "Footprint %s found, but it is locked" ),
                        module->GetReference().GetData() );
            DisplayInfoMessage( this, msg );
            break;
        }

        // This is a simple rotation, no other editing in progress
        if( !GetCurItem()->IsMoving() )
            SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );

        Rotate_Module( &dc, (MODULE*) GetCurItem(), -m_rotationAngle, true );
        break;

    case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
        m_canvas->MoveCursorToCrossHair();

        // If the current Item is a pad, text module ...: Get its parent
        if( GetCurItem()->Type() != PCB_MODULE_T )
            SetCurItem( GetCurItem()->GetParent() );

        if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
            break;

        module = (MODULE*) GetCurItem();

        if( module->IsLocked() )
        {
            wxString msg;
            msg.Printf( _( "Footprint %s found, but it is locked" ),
                        module->GetReference().GetData() );
            DisplayInfoMessage( this, msg );
            break;
        }

        // This is a simple flip, no other editing in progress
        if( !GetCurItem()->IsMoving() )
            SaveCopyInUndoList( GetCurItem(), UR_FLIPPED, ((MODULE*)GetCurItem())->GetPosition() );

        Change_Side_Module( (MODULE*) GetCurItem(), &dc );
        break;

    case ID_POPUP_PCB_EDIT_MODULE_PRMS:
        // If the current Item is a pad, text module ...: Get its parent
        if( GetCurItem()->Type() != PCB_MODULE_T )
            SetCurItem( GetCurItem()->GetParent() );

        if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
            break;

        InstallModuleOptionsFrame( (MODULE*) GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
        // If the current Item is a pad, text module ...: Get its parent
        if( GetCurItem()->Type() != PCB_MODULE_T )
            SetCurItem( GetCurItem()->GetParent() );

        if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
            break;

        if( GetCurItem()->GetTimeStamp() == 0 )    // Module Editor needs a non null timestamp
        {
            GetCurItem()->SetTimeStamp( GetNewTimeStamp() );
            OnModify();
        }

        {
            FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );

            editor->Load_Module_From_BOARD( (MODULE*)GetCurItem() );
            SetCurItem( NULL );     // the current module could be deleted by

            editor->Show( true );

            editor->Raise();        // Iconize( false );
        }
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_DRAG_PAD_REQUEST:
        module = (MODULE*) GetCurItem()->GetParent();

        if( !module || module->Type() != PCB_MODULE_T )
            break;

        if( module->IsLocked() )
        {
            wxString msg;
            msg.Printf( _( "The parent (%s) of the pad is locked" ),
                        module->GetReference().GetData() );
            DisplayInfoMessage( this, msg );
            break;
        }

        m_canvas->MoveCursorToCrossHair();
        StartMovePad( (D_PAD*) GetCurItem(), &dc, true );
        break;

    case ID_POPUP_PCB_MOVE_PAD_REQUEST:
        module = (MODULE*) GetCurItem()->GetParent();

        if( !module || module->Type() != PCB_MODULE_T )
            break;

        if( module->IsLocked() )
        {
            wxString msg;
            msg.Printf( _( "The parent (%s) of the pad is locked" ),
                        module->GetReference().GetData() );
            DisplayInfoMessage( this, msg );
            break;
        }

        m_canvas->MoveCursorToCrossHair();
        StartMovePad( (D_PAD*) GetCurItem(), &dc, false );
        break;

    case ID_POPUP_PCB_EDIT_PAD:
        InstallPadOptionsFrame( (D_PAD*) GetCurItem() );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
        m_canvas->MoveCursorToCrossHair();
        SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
        Import_Pad_Settings( (D_PAD*) GetCurItem(), true );
        break;

    case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
        m_canvas->MoveCursorToCrossHair();
        DlgGlobalChange_PadSettings( (D_PAD*) GetCurItem(), true );
        break;

    case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
        m_canvas->MoveCursorToCrossHair();
        Export_Pad_Settings( (D_PAD*) GetCurItem() );
        break;

    case ID_POPUP_PCB_DELETE_PAD:
        SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
        DeletePad( (D_PAD*) GetCurItem() );
        SetCurItem( NULL );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_EDIT_TEXTMODULE:
        InstallTextModOptionsFrame( (TEXTE_MODULE*) GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_RESET_TEXT_SIZE:
        ResetTextSize( GetCurItem(), &dc );
        break;

    case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
        m_canvas->MoveCursorToCrossHair();
        StartMoveTexteModule( (TEXTE_MODULE*) GetCurItem(), &dc );
        break;

    case ID_POPUP_PCB_ROTATE_TEXTMODULE:
        RotateTextModule( (TEXTE_MODULE*) GetCurItem(),
                         &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_DELETE_TEXTMODULE:
        DeleteTextModule( (TEXTE_MODULE*) GetCurItem() );
        SetCurItem( NULL );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_SELECT_LAYER:
        itmp = SelectLayer( getActiveLayer() );

        if( itmp >= 0 )
        {
            // if user changed colors and we are in high contrast mode, then redraw
            // because the PAD_SMD pads may change color.
            if( DisplayOpt.ContrastModeDisplay && getActiveLayer() != itmp )
            {
                m_canvas->Refresh();
            }
            setActiveLayer( itmp );
        }

        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
        SelectCopperLayerPair();
        break;

    case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
        itmp = SelectLayer( getActiveLayer(), ALL_CU_LAYERS );

        if( itmp >= 0 )
            setActiveLayer( itmp );

        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_SELECT_CU_LAYER:
        itmp = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS );

        if( itmp >= 0 )
            setActiveLayer( itmp );

        break;

    case ID_POPUP_PCB_SELECT_LAYER_PAIR:
        SelectCopperLayerPair();
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_TOOLBARH_PCB_SELECT_LAYER:
        setActiveLayer( m_SelLayerBox->GetLayerSelection() );

        if( DisplayOpt.ContrastModeDisplay )
            m_canvas->Refresh( true );

        break;

    case ID_POPUP_PCB_EDIT_TEXTEPCB:
        InstallTextPCBOptionsFrame( (TEXTE_PCB*) GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_ROTATE_TEXTEPCB:
        Rotate_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_COPY_TEXTEPCB:
        CreateTextePcb( &dc, (TEXTE_PCB*) GetCurItem() );
        m_canvas->MoveCursorToCrossHair();
        m_canvas->SetAutoPanRequest( true );
        break;

    case ID_POPUP_PCB_FLIP_TEXTEPCB:
        FlipTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_DELETE_TEXTEPCB:
        Delete_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
        BeginMoveTarget( (PCB_TARGET*) GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_EDIT_MIRE:
        ShowTargetOptionsDialog( (PCB_TARGET*) GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_DELETE_MIRE:
        m_canvas->MoveCursorToCrossHair();
        DeleteTarget( (PCB_TARGET*) GetCurItem(), &dc );
        SetCurItem( NULL );
        break;

    case ID_POPUP_PCB_DELETE_DIMENSION:
        m_canvas->MoveCursorToCrossHair();
        DeleteDimension( (DIMENSION*) GetCurItem(), &dc );
        SetCurItem( NULL );
        break;

    case ID_POPUP_PCB_EDIT_DIMENSION:
        ShowDimensionPropertyDialog( (DIMENSION*) GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
        BeginMoveDimensionText( (DIMENSION*) GetCurItem(), &dc );
        break;

    case ID_POPUP_PCB_DELETE_DRAWING:
        Delete_Segment_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_DELETE_MARKER:
        RemoveStruct( GetCurItem(), &dc );
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_GETINFO_MARKER:
        if( GetCurItem() && GetCurItem()->Type() == PCB_MARKER_T )
            ( (MARKER_PCB*) GetCurItem() )->DisplayMarkerInfo( this );

        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_DELETE_DRAWING_LAYER:
        if( GetCurItem()->GetFlags() != 0 )
            break;

        Delete_Drawings_All_Layer( GetCurItem()->GetLayer() );
        SetCurItem( NULL );
        m_canvas->MoveCursorToCrossHair();
        m_canvas->Refresh();
        break;

    case ID_POPUP_PCB_EDIT_DRAWING:
#ifndef USE_WX_OVERLAY
        InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), &dc );
#else
        // #1277772 - Draw into dialog converted in refresh request
        InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), NULL );
        m_canvas->Refresh();
#endif
        m_canvas->MoveCursorToCrossHair();
        break;

    case ID_POPUP_PCB_MOVE_DRAWING_REQUEST:
        m_canvas->MoveCursorToCrossHair();
        Start_Move_DrawItem( (DRAWSEGMENT*) GetCurItem(), &dc );
        break;

    case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
        m_canvas->MoveCursorToCrossHair();

        if( GetCurItem() && (GetCurItem()->IsNew()) )
        {
            End_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
            SetCurItem( NULL );
        }

        break;

    case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
        m_canvas->MoveCursorToCrossHair();

        if( GetCurItem() && (GetCurItem()->IsNew()) )
        {
            if( End_Zone( &dc ) )
                SetCurItem( NULL );
        }

        m_canvas->SetAutoPanRequest( false );
        break;

    case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
        m_canvas->MoveCursorToCrossHair();

        if( GetCurItem() && (GetCurItem()->IsNew()) )
        {
            if( Delete_LastCreatedCorner( &dc ) == 0 )  // No more segment in outline,
                SetCurItem( NULL );
        }

        break;


    case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
        m_canvas->MoveCursorToCrossHair();
        StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
        break;

    case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
    case ID_POPUP_PCB_MOVE_TRACK_NODE:
        m_canvas->MoveCursorToCrossHair();
        StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
        break;

    case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
        m_canvas->MoveCursorToCrossHair();
        Start_DragTrackSegmentAndKeepSlope( (TRACK*) GetScreen()->GetCurItem(), &dc );
        break;

    case ID_POPUP_PCB_BREAK_TRACK:
        m_canvas->MoveCursorToCrossHair();
        {
            TRACK*  track = (TRACK*) GetScreen()->GetCurItem();
            wxPoint pos   = GetCrossHairPosition();

            track->Draw( m_canvas, &dc, GR_XOR );
            PICKED_ITEMS_LIST itemsListPicker;

            TRACK*  newtrack = GetBoard()->CreateLockPoint( pos, track, &itemsListPicker );

            SaveCopyInUndoList( itemsListPicker, UR_UNSPECIFIED );
            track->Draw( m_canvas, &dc, GR_XOR );
            newtrack->Draw( m_canvas, &dc, GR_XOR );

            // compute the new ratsnest, because connectivity could change
            TestNetConnection( &dc, track->GetNetCode() );
        }
        break;

    case ID_MENU_PCB_CLEAN:
        Clean_Pcb();
        break;

    case ID_MENU_PCB_SWAP_LAYERS:
        Swap_Layers( event );
        break;

    case ID_PCB_USER_GRID_SETUP:
        InvokeDialogGrid();
        break;

    case ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC:
        {
            wxConfigBase* cfg = Pgm().CommonSettings();
            cfg->Read( wxT( "module_doc_file" ), g_DocModulesFileName );
            GetAssociatedDocument( this, g_DocModulesFileName, &Kiface().KifaceSearch() );
        }
        break;

    case ID_MENU_ARCHIVE_NEW_MODULES:
        ArchiveModulesOnBoard( true );
        break;

    case ID_MENU_ARCHIVE_ALL_MODULES:
        ArchiveModulesOnBoard( false );
        break;

    case ID_GEN_IMPORT_DXF_FILE:
        InvokeDXFDialogImport( this );
        m_canvas->Refresh();
        break;

    default:
        wxString msg;
        msg.Printf( wxT( "PCB_EDIT_FRAME::Process_Special_Functions() unknown event id %d" ),
                    id );
        DisplayError( this, msg );
        break;
    }

    m_canvas->CrossHairOn( &dc );
    m_canvas->SetIgnoreMouseEvents( false );
}