static int pcm037_devices_init(void)
{
/* CS0: Nor Flash */
imx31_setup_weimcs(0, 0x0000cf03, 0x10000d03, 0x00720900);
/* CS1: Network Controller */
imx31_setup_weimcs(1, 0x0000df06, 0x444a4541, 0x44443302);
/* CS4: SRAM */
imx31_setup_weimcs(4, 0x0000d843, 0x22252521, 0x22220a00);
/* CS5: SJA1000 */
imx31_setup_weimcs(4, 0x0000DCF6, 0x444A0301, 0x44443302);
/*
* Up to 32MiB NOR type flash, connected to
* CS line 0, data width is 16 bit
*/
add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX31_CS0_BASE_ADDR, 32 * 1024 * 1024, 0);
imx31_add_mmc0(NULL);
/*
* Create partitions that should be
* not touched by any regular user
*/
devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self0"); /* ourself */
devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0"); /* environment */
protect_file("/dev/env0", 1);
/*
* up to 2MiB static RAM type memory, connected
* to CS4, data width is 16 bit
*/
add_mem_device("sram0", MX31_CS4_BASE_ADDR, MX31_CS4_SIZE, /* area size */
IORESOURCE_MEM_WRITEABLE);
imx31_add_nand(&nand_info);
/*
* SMSC 9217 network controller
* connected to CS line 1 and interrupt line
* GPIO3, data width is 16 bit
*/
add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, MX31_CS1_BASE_ADDR,
MX31_CS1_SIZE, IORESOURCE_MEM, &smsc9217_pdata);
#ifdef CONFIG_USB
pcm037_usb_init();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX31_USB_OTG_BASE_ADDR, NULL);
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX31_USB_HS2_BASE_ADDR, NULL);
#endif
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_PCM037);
return 0;
}
static void pca100_usb_register(void)
{
mdelay(10);
gpio_direction_output(GPIO_PORTB + 24, 0);
gpio_direction_output(GPIO_PORTB + 23, 0);
mdelay(10);
ulpi_setup((void *)(MX27_USB_OTG_BASE_ADDR + 0x170), 1);
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX27_USB_OTG_BASE_ADDR, NULL);
ulpi_setup((void *)(MX27_USB_OTG_BASE_ADDR + 0x570), 1);
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX27_USB_OTG_BASE_ADDR + 0x400, NULL);
}
static void olinuxino_init_usb(void)
{
imx23_usb_phy_enable();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, IMX_USB_BASE, NULL);
}
static int imx25_3ds_devices_init(void)
{
#ifdef CONFIG_USB
/* USB does not work yet. Don't know why. Maybe
* the CPLD has to be initialized.
*/
imx25_usb_init();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX25_USB_OTG_BASE_ADDR + 0x400, NULL);
#endif
imx25_iim_register_fec_ethaddr();
imx25_add_fec(&fec_info);
add_mem_device("sram0", 0x78000000, 128 * 1024, IORESOURCE_MEM_WRITEABLE);
if (readl(MX25_CCM_BASE_ADDR + MX25_CCM_RCSR) & (1 << 14))
nand_info.width = 2;
imx25_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
imx25_add_i2c0(NULL);
armlinux_set_architecture(MACH_TYPE_MX25_3DS);
armlinux_set_serial(imx_uid());
return 0;
}
static int mx23_evk_devices_init(void)
{
int i, rc;
/* initizalize gpios */
for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
imx_gpio_mode(pad_setup[i]);
armlinux_set_architecture(MACH_TYPE_MX23EVK);
add_generic_device("mxs_mci", DEVICE_ID_DYNAMIC, NULL, IMX_SSP1_BASE,
0x8000, IORESOURCE_MEM, &mci_pdata);
rc = register_persistant_environment();
if (rc != 0)
printf("Cannot create the 'env0' persistant "
"environment storage (%d)\n", rc);
#ifdef CONFIG_USB_GADGET_DRIVER_ARC
imx23_usb_phy_enable();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, IMX_USB_BASE, NULL);
add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, IMX_USB_BASE,
0x200, IORESOURCE_MEM, &usb_pdata);
#endif
return 0;
}
static int ac100_devices_init(void)
{
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, TEGRA_USB3_BASE,
&ehci_pdata);
return 0;
}
static void loco_ehci_init(void)
{
/* USB PWR enable */
gpio_direction_output(MX53_LOCO_USB_PWREN, 0);
gpio_set_value(MX53_LOCO_USB_PWREN, 1);
writel(0, MX53_OTG_BASE_ADDR + 0x384); /* setup portsc */
add_generic_usb_ehci_device(1, MX53_OTG_BASE_ADDR + 0x200, NULL);
}
static void sabrelite_ehci_init(void)
{
imx6_usb_phy2_disable_oc();
imx6_usb_phy2_enable();
/* hub reset */
gpio_direction_output(204, 0);
udelay(2000);
gpio_set_value(204, 1);
add_generic_usb_ehci_device(1, MX6_USBOH3_USB_BASE_ADDR + 0x200, NULL);
}
static void falconwing_init_usb(void)
{
/* power USB hub */
gpio_direction_output(GPIO_USB_HUB_POWER, 1);
mdelay(1);
/* bring USB hub out of reset */
gpio_direction_output(GPIO_USB_HUB_RESET, 1);
imx23_usb_phy_enable();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, IMX_USB_BASE, NULL);
}
static int eukrea_cpuimx25_devices_init(void)
{
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
ARRAY_SIZE(eukrea_cpuimx25_pads));
led_gpio_register(&led0);
imx25_iim_register_fec_ethaddr();
imx25_add_fec(&fec_info);
nand_info.width = 1;
imx25_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, 0x40000,
DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x20000,
DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
/* enable LCD */
gpio_direction_output(26, 1);
gpio_set_value(26, 1);
/* LED : default OFF */
gpio_direction_output(2 * 32 + 19, 1);
/* Switch : input */
gpio_direction_input(2 * 32 + 18);
imx25_add_fb(&eukrea_cpuimx25_fb_data);
imx25_add_i2c0(NULL);
imx25_add_mmc0(NULL);
#ifdef CONFIG_USB
imx25_usb_init();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX25_USB_OTG_BASE_ADDR + 0x400, NULL);
#endif
#ifdef CONFIG_USB_GADGET
/* Workaround ENGcm09152 */
writel(readl(MX25_USB_OTG_BASE_ADDR + 0x608) | (1 << 23), MX25_USB_OTG_BASE_ADDR + 0x608);
add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, MX25_USB_OTG_BASE_ADDR, 0x200,
IORESOURCE_MEM, &usb_pdata);
#endif
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX25SD);
return 0;
}
static int mx28_evk_devices_init(void)
{
int i;
/* initizalize muxing */
for (i = 0; i < ARRAY_SIZE(mx28evk_pads); i++)
imx_gpio_mode(mx28evk_pads[i]);
armlinux_set_architecture(MACH_TYPE_MX28EVK);
add_generic_device("mxs_mci", 0, NULL, IMX_SSP0_BASE, 0x2000,
IORESOURCE_MEM, &mci_pdata);
add_generic_device("stmfb", 0, NULL, IMX_FB_BASE, 0x2000,
IORESOURCE_MEM, &mx28_evk_fb_pdata);
mx28_evk_get_ethaddr(); /* must be after registering ocotp */
mx28_evk_fec_reset();
add_generic_device("imx28-fec", 0, NULL, IMX_FEC0_BASE, 0x4000,
IORESOURCE_MEM, &fec_info);
imx28_add_nand();
spi_register_board_info(mx28evk_spi_board_info,
ARRAY_SIZE(mx28evk_spi_board_info));
add_generic_device("mxs_spi", 2, NULL, IMX_SSP2_BASE, 0x2000,
IORESOURCE_MEM, NULL);
#ifdef CONFIG_USB_GADGET_DRIVER_ARC
imx28_usb_phy0_enable();
imx28_usb_phy1_enable();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, IMX_USB1_BASE, NULL);
add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, IMX_USB0_BASE,
0x200, IORESOURCE_MEM, &usb_pdata);
#endif
return 0;
}
static int pcm038_devices_init(void)
{
int i;
char *envdev;
unsigned int mode[] = {
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
PD2_AIN_FEC_TXD2,
PD3_AIN_FEC_TXD3,
PD4_AOUT_FEC_RX_ER,
PD5_AOUT_FEC_RXD1,
PD6_AOUT_FEC_RXD2,
PD7_AOUT_FEC_RXD3,
PD8_AF_FEC_MDIO,
PD9_AIN_FEC_MDC | GPIO_PUEN,
PD10_AOUT_FEC_CRS,
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
PE14_PF_UART1_CTS,
PE15_PF_UART1_RTS,
PD25_PF_CSPI1_RDY,
GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT,
PD29_PF_CSPI1_SCLK,
PD30_PF_CSPI1_MISO,
PD31_PF_CSPI1_MOSI,
/* display */
PA5_PF_LSCLK,
PA6_PF_LD0,
PA7_PF_LD1,
PA8_PF_LD2,
PA9_PF_LD3,
PA10_PF_LD4,
PA11_PF_LD5,
PA12_PF_LD6,
PA13_PF_LD7,
PA14_PF_LD8,
PA15_PF_LD9,
PA16_PF_LD10,
PA17_PF_LD11,
PA18_PF_LD12,
PA19_PF_LD13,
PA20_PF_LD14,
PA21_PF_LD15,
PA22_PF_LD16,
PA23_PF_LD17,
PA24_PF_REV,
PA25_PF_CLS,
PA26_PF_PS,
PA27_PF_SPL_SPR,
PA28_PF_HSYNC,
PA29_PF_VSYNC,
PA30_PF_CONTRAST,
PA31_PF_OE_ACD,
/* USB host 2 */
PA0_PF_USBH2_CLK,
PA1_PF_USBH2_DIR,
PA2_PF_USBH2_DATA7,
PA3_PF_USBH2_NXT,
PA4_PF_USBH2_STP,
PD19_AF_USBH2_DATA4,
PD20_AF_USBH2_DATA3,
PD21_AF_USBH2_DATA6,
PD22_AF_USBH2_DATA0,
PD23_AF_USBH2_DATA2,
PD24_AF_USBH2_DATA1,
PD26_AF_USBH2_DATA5,
/* I2C1 */
PD17_PF_I2C_DATA | GPIO_PUEN,
PD18_PF_I2C_CLK,
/* I2C2 */
PC5_PF_I2C2_SDA,
PC6_PF_I2C2_SCL,
};
/* configure 16 bit nor flash on cs0 */
CS0U = 0x22C2CF00;
CS0L = 0x75000D01;
CS0A = 0x00000900;
/* configure SRAM on cs1 */
CS1U = 0x0000d843;
CS1L = 0x22252521;
CS1A = 0x22220a00;
/* configure SJA1000 on cs4 */
CS4U = 0x0000DCF6;
CS4L = 0x444A0301;
CS4A = 0x44443302;
/* initizalize gpios */
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
PCCR0 |= PCCR0_CSPI1_EN;
PCCR1 |= PCCR1_PERCLK2_EN;
gpio_direction_output(GPIO_PORTD | 28, 0);
gpio_set_value(GPIO_PORTD | 28, 0);
spi_register_board_info(pcm038_spi_board_info, ARRAY_SIZE(pcm038_spi_board_info));
imx27_add_spi0(&pcm038_spi_0_data);
add_cfi_flash_device(-1, 0xC0000000, 32 * 1024 * 1024, 0);
imx27_add_nand(&nand_info);
imx27_add_fb(&pcm038_fb_data);
PCCR0 |= PCCR0_I2C1_EN | PCCR0_I2C2_EN;
imx27_add_i2c0(NULL);
imx27_add_i2c1(NULL);
#ifdef CONFIG_USB
pcm038_usbh_init();
add_generic_usb_ehci_device(-1, IMX_OTG_BASE + 0x400, NULL);
#endif
/* Register the fec device after the PLL re-initialisation
* as the fec depends on the (now higher) ipg clock
*/
imx27_add_fec(&fec_info);
switch ((GPCR & GPCR_BOOT_MASK) >> GPCR_BOOT_SHIFT) {
case GPCR_BOOT_8BIT_NAND_2k:
case GPCR_BOOT_16BIT_NAND_2k:
case GPCR_BOOT_16BIT_NAND_512:
case GPCR_BOOT_8BIT_NAND_512:
devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
envdev = "NAND";
break;
default:
devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0");
devfs_add_partition("nor0", 0x40000, 0x20000, PARTITION_FIXED, "env0");
protect_file("/dev/env0", 1);
envdev = "NOR";
}
printf("Using environment in %s Flash\n", envdev);
armlinux_set_bootparams((void *)0xa0000100);
armlinux_set_architecture(MACH_TYPE_PCM038);
return 0;
}
static int neso_devices_init(void)
{
int i;
unsigned int mode[] = {
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
PE14_PF_UART1_CTS,
PE15_PF_UART1_RTS,
/* FEC */
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
PD2_AIN_FEC_TXD2,
PD3_AIN_FEC_TXD3,
PD4_AOUT_FEC_RX_ER,
PD5_AOUT_FEC_RXD1,
PD6_AOUT_FEC_RXD2,
PD7_AOUT_FEC_RXD3,
PD8_AF_FEC_MDIO,
PD9_AIN_FEC_MDC,
PD10_AOUT_FEC_CRS,
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
/* SSI1 connected in AC97 style */
PC20_PF_SSI1_FS,
PC21_PF_SSI1_RXD,
PC22_PF_SSI1_TXD,
PC23_PF_SSI1_CLK,
/* LED 1 */
(GPIO_PORTB | 15 | GPIO_GPIO | GPIO_OUT),
/* LED 2 */
(GPIO_PORTB | 16 | GPIO_GPIO | GPIO_OUT),
/* CTOUCH reset */
(GPIO_PORTB | 17 | GPIO_GPIO | GPIO_OUT),
/* CTOUCH IRQ */
(GPIO_PORTB | 14 | GPIO_GPIO | GPIO_IN),
/* RTC IRQ */
(GPIO_PORTF | 14 | GPIO_GPIO | GPIO_IN),
/* SD change card detection */
(GPIO_PORTF | 17 | GPIO_GPIO | GPIO_IN),
/* SDHC1*/
PE18_PF_SD1_D0,
PE19_PF_SD1_D1,
PE20_PF_SD1_D2,
PE21_PF_SD1_D3,
PE22_PF_SD1_CMD,
PE23_PF_SD1_CLK,
/* I2C1 */
PD17_PF_I2C_DATA,
PD18_PF_I2C_CLK,
/* I2C2, for CTOUCH */
PC5_PF_I2C2_SDA,
PC6_PF_I2C2_SCL,
/* Connected to: Both USB phys and ethernet phy FIXME 1 = RESET? */
PE17_PF_RESET_OUT,
/* USB host */
(USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT),
PA0_PF_USBH2_CLK,
PA1_PF_USBH2_DIR,
PA3_PF_USBH2_NXT,
PA4_PF_USBH2_STP,
PD22_AF_USBH2_DATA0,
PD24_AF_USBH2_DATA1,
PD23_AF_USBH2_DATA2,
PD20_AF_USBH2_DATA3,
PD19_AF_USBH2_DATA4,
PD26_AF_USBH2_DATA5,
PD21_AF_USBH2_DATA6,
PA2_PF_USBH2_DATA7,
/* USB OTG */
(OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT),
PE24_PF_USBOTG_CLK,
PE2_PF_USBOTG_DIR,
PE0_PF_USBOTG_NXT,
PE1_PF_USBOTG_STP,
PC9_PF_USBOTG_DATA0,
PC11_PF_USBOTG_DATA1,
PC10_PF_USBOTG_DATA2,
PC13_PF_USBOTG_DATA3,
PC12_PF_USBOTG_DATA4,
PC7_PF_USBOTG_DATA5,
PC8_PF_USBOTG_DATA6,
PE25_PF_USBOTG_DATA7,
/* Display signals */
(LCD_POWER_GPIO | GPIO_GPIO | GPIO_OUT), /* LCD power: 1 = LCD on */
PA5_PF_LSCLK,
PA6_PF_LD0,
PA7_PF_LD1,
PA8_PF_LD2,
PA9_PF_LD3,
PA10_PF_LD4,
PA11_PF_LD5,
PA12_PF_LD6,
PA13_PF_LD7,
PA14_PF_LD8,
PA15_PF_LD9,
PA16_PF_LD10,
PA17_PF_LD11,
PA18_PF_LD12,
PA19_PF_LD13,
PA20_PF_LD14,
PA21_PF_LD15,
PA22_PF_LD16,
PA23_PF_LD17,
PA31_PF_OE_ACD, /* DE */
/* Backlight PWM (Use as gpio) */
(BACKLIGHT_POWER_GPIO | GPIO_GPIO | GPIO_OUT),
};
/* reset the chip select lines to the USB/OTG phys to avoid any hang */
gpio_direction_output(OTG_PHY_CS_GPIO, 1);
gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
/* initialize gpios */
for (i = 0; i < ARRAY_SIZE(mode); i++)
imx_gpio_mode(mode[i]);
imx27_add_nand(&nand_info);
imx27_add_fb(&neso_fb_data);
#ifdef CONFIG_USB
neso_usbh_init();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX27_USB_OTG_BASE_ADDR + 0x400, NULL);
#endif
imx27_add_fec(&fec_info);
devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x80000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
armlinux_set_bootparams((void *)0xa0000100);
armlinux_set_architecture(MACH_TYPE_NESO);
return 0;
}
