Cube::Cube(const position_type &where, std::shared_ptr<Texture> texture )
: Object3D(where) {
// 8 points, 6 surfaces
position_type
blf(-1.0, -1.0, 1.0) // front rectangle
, brf(1.0, -1.0, 1.0)
, trf(1.0, 1.0, 1.0)
, tlf(-1.0, 1.0, 1.0)
, blr(-1.0, -1.0, -1.0) // rear rectangle
, brr(1.0, -1.0, -1.0)
, trr(1.0, 1.0, -1.0)
, tlr(-1.0, 1.0, -1.0);
position_type
negZ(0.0, 0.0, -1.0)
, posZ(0.0, 0.0, 1.0)
, negY(0.0, -1.0, 0.0)
, posY(0.0, 1.0, 0.0)
, negX(-1.0, 0.0, 0.0)
, posX(1.0, 0.0, 0.0);
// if changing the order, make sure to change accessors so they grab the correct object
this->add_child(new Rectangle(POSITION_INHERIT, { blf, blr, brr, brf }, { negY, negY, negY, negY }, texture)); // bottom negY
this->add_child(new Rectangle(POSITION_INHERIT, { trr, brr, blr, tlr }, { negZ, negZ, negZ, negZ }, texture)); // rear negZ
this->add_child(new Rectangle(POSITION_INHERIT, { trf, brf, brr, trr }, { posX, posX, posX, posX }, texture)); // right posX
this->add_child(new Rectangle(POSITION_INHERIT, { tlr, blr, blf, tlf }, { negX, negX, negX, negX }, texture)); // left negX
this->add_child(new Rectangle(POSITION_INHERIT, { tlf, blf, brf, trf }, { posZ, posZ, posZ, posZ }, texture)); // front posZ
this->add_child(new Rectangle(POSITION_INHERIT, { tlr, tlf, trf, trr }, { posY, posY, posY, posY }, texture)); // top posY
} // Cube
address AbstractInterpreterGenerator::generate_result_handler_for(BasicType type) {
//
// Registers alive
// R3_RET
// LR
//
// Registers updated
// R3_RET
//
Label done;
address entry = __ pc();
switch (type) {
case T_BOOLEAN:
// convert !=0 to 1
__ neg(R0, R3_RET);
__ orr(R0, R3_RET, R0);
__ srwi(R3_RET, R0, 31);
break;
case T_BYTE:
// sign extend 8 bits
__ extsb(R3_RET, R3_RET);
break;
case T_CHAR:
// zero extend 16 bits
__ clrldi(R3_RET, R3_RET, 48);
break;
case T_SHORT:
// sign extend 16 bits
__ extsh(R3_RET, R3_RET);
break;
case T_INT:
// sign extend 32 bits
__ extsw(R3_RET, R3_RET);
break;
case T_LONG:
break;
case T_OBJECT:
// unbox result if not null
__ cmpdi(CCR0, R3_RET, 0);
__ beq(CCR0, done);
__ ld(R3_RET, 0, R3_RET);
__ verify_oop(R3_RET);
break;
case T_FLOAT:
break;
case T_DOUBLE:
break;
case T_VOID:
break;
default: ShouldNotReachHere();
}
__ BIND(done);
__ blr();
return entry;
}
// Abstract method entry.
//
address InterpreterGenerator::generate_abstract_entry(void) {
address entry = __ pc();
//
// Registers alive
// R16_thread - JavaThread*
// R19_method - callee's method (method to be invoked)
// R1_SP - SP prepared such that caller's outgoing args are near top
// LR - return address to caller
//
// Stack layout at this point:
//
// 0 [TOP_IJAVA_FRAME_ABI] <-- R1_SP
// alignment (optional)
// [outgoing Java arguments]
// ...
// PARENT [PARENT_IJAVA_FRAME_ABI]
// ...
//
// Can't use call_VM here because we have not set up a new
// interpreter state. Make the call to the vm and make it look like
// our caller set up the JavaFrameAnchor.
__ set_top_ijava_frame_at_SP_as_last_Java_frame(R1_SP, R12_scratch2/*tmp*/);
// Push a new C frame and save LR.
__ save_LR_CR(R0);
__ push_frame_reg_args(0, R11_scratch1);
// This is not a leaf but we have a JavaFrameAnchor now and we will
// check (create) exceptions afterward so this is ok.
__ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_AbstractMethodError),
R16_thread);
// Pop the C frame and restore LR.
__ pop_frame();
__ restore_LR_CR(R0);
// Reset JavaFrameAnchor from call_VM_leaf above.
__ reset_last_Java_frame();
#ifdef CC_INTERP
// Return to frame manager, it will handle the pending exception.
__ blr();
#else
// We don't know our caller, so jump to the general forward exception stub,
// which will also pop our full frame off. Satisfy the interface of
// SharedRuntime::generate_forward_exception()
__ load_const_optimized(R11_scratch1, StubRoutines::forward_exception_entry(), R0);
__ mtctr(R11_scratch1);
__ bctr();
#endif
return entry;
}
address CppInterpreterGenerator::generate_result_handler_for(BasicType type)
{
address start = __ pc();
switch (type) {
case T_VOID:
break;
case T_BOOLEAN:
{
Label zero;
__ compare (r3, 0);
__ beq (zero);
__ load (r3, 1);
__ bind (zero);
}
break;
case T_CHAR:
__ andi_ (r3, r3, 0xffff);
break;
case T_BYTE:
__ extsb (r3, r3);
break;
case T_SHORT:
__ extsh (r3, r3);
break;
case T_INT:
#ifdef PPC64
__ extsw (r3, r3);
#endif
break;
case T_LONG:
case T_FLOAT:
case T_DOUBLE:
break;
case T_OBJECT:
__ load (r3, STATE(_oop_temp));
__ verify_oop (r3);
break;
default:
ShouldNotReachHere();
}
__ blr ();
return start;
}
address CppInterpreterGenerator::generate_stack_to_native_abi_converter(
BasicType type)
{
const Register stack = r5;
address start = __ pc();
switch (type) {
case T_VOID:
break;
case T_BOOLEAN:
case T_CHAR:
case T_BYTE:
case T_SHORT:
case T_INT:
__ load (stack, STATE(_stack));
__ lwa (r3, Address(stack, wordSize));
break;
case T_LONG:
__ load (stack, STATE(_stack));
__ load (r3, Address(stack, wordSize));
#ifdef PPC32
__ load (r4, Address(stack, wordSize * 2));
#endif
break;
case T_FLOAT:
__ load (stack, STATE(_stack));
__ lfs (f1, Address(stack, wordSize));
break;
case T_DOUBLE:
__ load (stack, STATE(_stack));
__ lfd (f1, Address(stack, wordSize));
break;
case T_OBJECT:
__ load (stack, STATE(_stack));
__ load (r3, Address(stack, wordSize));
__ verify_oop (r3);
break;
default:
ShouldNotReachHere();
}
__ blr ();
return start;
}
address CppInterpreterGenerator::generate_stack_to_stack_converter(
BasicType type)
{
const Register stack = r3;
address start = __ pc();
switch (type) {
case T_VOID:
break;
case T_BOOLEAN:
case T_CHAR:
case T_BYTE:
case T_SHORT:
case T_INT:
case T_FLOAT:
__ load (stack, STATE(_stack));
__ lwz (r0, Address(stack, wordSize));
__ stw (r0, Address(Rlocals, 0));
__ subi (Rlocals, Rlocals, wordSize);
break;
case T_LONG:
case T_DOUBLE:
__ load (stack, STATE(_stack));
__ load (r0, Address(stack, wordSize));
__ store (r0, Address(Rlocals, -wordSize));
#ifdef PPC32
__ load (r0, Address(stack, wordSize * 2));
__ store (r0, Address(Rlocals, 0));
#endif
__ subi (Rlocals, Rlocals, wordSize * 2);
break;
case T_OBJECT:
__ load (stack, STATE(_stack));
__ load (r0, Address(stack, wordSize));
__ verify_oop (r0);
__ store (r0, Address(Rlocals, 0));
__ subi (Rlocals, Rlocals, wordSize);
break;
default:
ShouldNotReachHere();
}
__ blr ();
return start;
}
address CppInterpreterGenerator::generate_tosca_to_stack_converter(
BasicType type)
{
address start = __ pc();
switch (type) {
case T_VOID:
break;
case T_BOOLEAN:
case T_CHAR:
case T_BYTE:
case T_SHORT:
case T_INT:
__ stw (r3, Address(Rlocals, 0));
__ subi (Rlocals, Rlocals, wordSize);
break;
case T_LONG:
__ store (r3, Address(Rlocals, -wordSize));
#ifdef PPC32
__ store (r4, Address(Rlocals, 0));
#endif
__ subi (Rlocals, Rlocals, wordSize * 2);
break;
case T_FLOAT:
__ stfs (f1, Address(Rlocals, 0));
__ subi (Rlocals, Rlocals, wordSize);
break;
case T_DOUBLE:
__ stfd (f1, Address(Rlocals, -wordSize));
__ subi (Rlocals, Rlocals, wordSize * 2);
break;
case T_OBJECT:
__ verify_oop (r3);
__ store (r3, Address(Rlocals, 0));
__ subi (Rlocals, Rlocals, wordSize);
break;
default:
ShouldNotReachHere();
}
__ blr ();
return start;
}
address InterpreterGenerator::generate_empty_entry()
{
if (!UseFastEmptyMethods)
return NULL;
Label& slow_path = fast_accessor_slow_entry_path;
address start = __ pc();
// Drop into the slow path if we need a safepoint check.
__ load (r3, (intptr_t) SafepointSynchronize::address_of_state());
__ load (r0, Address(r3, 0));
__ compare (r0, SafepointSynchronize::_not_synchronized);
__ bne (slow_path);
// Ok, we're done :)
__ blr ();
return start;
}
// These stubs get called from some dumb test routine.
// I'll write them properly when they're called from
// something that's actually doing something.
address generate_arraycopy_stub(const char *name, int line)
{
#ifdef PPC
StubCodeMark mark(this, "StubRoutines", name);
address start = __ enter();
const Register from = r3; // source array address
const Register to = r4; // destination array address
const Register count = r5; // element count
__ compare (count, 0);
__ beqlr ();
__ unimplemented (__FILE__, line);
__ blr ();
return start;
#else
return UnimplementedStub();
#endif // PPC
}
Cube::Cube( const position_type &where, Texture::pointer_type texture )
: Object( where, texture )
{
glm::vec3
blf( -1.0, -1.0, 1.0 ) // front rectangle
, brf( 1.0, -1.0, 1.0 )
, trf( 1.0, 1.0, 1.0 )
, tlf( -1.0, 1.0, 1.0 )
, blr( -1.0, -1.0, -1.0 ) // rear rectangle
, brr( 1.0, -1.0, -1.0 )
, trr( 1.0, 1.0, -1.0 )
, tlr( -1.0, 1.0, -1.0 )
;
glm::vec3
negZ( 0.0, 0.0, -1.0 )
, posZ( 0.0, 0.0, 1.0 )
, negY( 0.0, -1.0, 0.0 )
, posY( 0.0, 1.0, 0.0 )
, negX( -1.0, 0.0, 0.0 )
, posX( 1.0, 0.0, 0.0 )
;
// gl_triangle strip
// for ccw winding: top left, bottom left, top right, bottom right
auto add_components = [ &]( const std::vector<Component::pointer_type>& vec )
{
for ( auto& v : vec )
this->components.emplace_back( v );
};
add_components( Triangle::from_quad( std::vector<glm::vec3>( { blf, blr, brf, brr } ), negY, texture ) ); // bottom
add_components( Triangle::from_quad( std::vector<glm::vec3>( { trr, brr, tlr, blr } ), negZ, texture ) ); // rear
add_components( Triangle::from_quad( std::vector<glm::vec3>( { trf, brf, trr, brr } ), posX, texture ) ); // right posX
add_components( Triangle::from_quad( std::vector<glm::vec3>( { tlr, blr, tlf, blf } ), negX, texture ) ); // left negX
add_components( Triangle::from_quad( std::vector<glm::vec3>( { tlf, blf, trf, brf } ), posZ, texture ) ); // front posZ
add_components( Triangle::from_quad( std::vector<glm::vec3>( { tlr, tlf, trr, trf } ), posY, texture ) ); // top posY
}
address generate_call_stub(address& return_address)
{
assert (!TaggedStackInterpreter, "not supported");
StubCodeMark mark(this, "StubRoutines", "call_stub");
address start = __ enter();
const Register call_wrapper = r3;
const Register result = r4;
const Register result_type = r5;
const Register method = r6;
const Register entry_point = r7;
const Register parameters = r8;
const Register parameter_words = r9;
const Register thread = r10;
#ifdef ASSERT
// Make sure we have no pending exceptions
{
StackFrame frame;
Label label;
__ load (r0, Address(thread, Thread::pending_exception_offset()));
__ compare (r0, 0);
__ beq (label);
__ prolog (frame);
__ should_not_reach_here (__FILE__, __LINE__);
__ epilog (frame);
__ blr ();
__ bind (label);
}
#endif // ASSERT
// Calculate the frame size
StackFrame frame;
for (int i = 0; i < StackFrame::max_crfs; i++)
frame.get_cr_field();
for (int i = 0; i < StackFrame::max_gprs; i++)
frame.get_register();
StubRoutines::set_call_stub_base_size(frame.unaligned_size() + 3*wordSize);
// the 3 extra words are for call_wrapper, result and result_type
const Register parameter_bytes = parameter_words;
__ shift_left (parameter_bytes, parameter_words, LogBytesPerWord);
const Register frame_size = r11;
const Register padding = r12;
__ addi (frame_size, parameter_bytes, StubRoutines::call_stub_base_size());
__ calc_padding_for_alignment (padding, frame_size, StackAlignmentInBytes);
__ add (frame_size, frame_size, padding);
// Save the link register and create the new frame
__ mflr (r0);
__ store (r0, Address(r1, StackFrame::lr_save_offset * wordSize));
__ neg (r0, frame_size);
__ store_update_indexed (r1, r1, r0);
#ifdef PPC64
__ mfcr (r0);
__ store (r0, Address(r1, StackFrame::cr_save_offset * wordSize));
#endif // PPC64
// Calculate the address of the interpreter's local variables
const Register locals = frame_size;
__ addi (locals, r1, frame.start_of_locals() - wordSize);
__ add (locals, locals, padding);
__ add (locals, locals, parameter_bytes);
// Store the call wrapper address and the result stuff
const int initial_offset = 1;
int offset = initial_offset;
__ store (call_wrapper, Address(locals, offset++ * wordSize));
__ store (result, Address(locals, offset++ * wordSize));
__ store (result_type, Address(locals, offset++ * wordSize));
// Store the registers
#ifdef PPC32
__ mfcr (r0);
__ store (r0, Address(locals, offset++ * wordSize));
#endif // PPC32
for (int i = 14; i < 32; i++) {
__ store (as_Register(i), Address(locals, offset++ * wordSize));
}
const int final_offset = offset;
// Store the location of call_wrapper
frame::set_call_wrapper_offset((final_offset - initial_offset) * wordSize);
#ifdef ASSERT
// Check that we wrote all the way to the end of the frame.
// The frame may have been resized when we return from the
// interpreter, so the start of the frame may have moved
// but the end will be where we left it and we rely on this
// to find our stuff.
{
StackFrame frame;
Label label;
__ load (r3, Address(r1, 0));
__ subi (r3, r3, final_offset * wordSize);
__ compare (r3, locals);
__ beq (label);
__ prolog (frame);
__ should_not_reach_here (__FILE__, __LINE__);
__ epilog (frame);
__ blr ();
__ bind (label);
}
#endif // ASSERT
// Pass parameters if any
{
Label loop, done;
__ compare (parameter_bytes, 0);
__ ble (done);
const Register src = parameters;
const Register dst = padding;
__ mr (dst, locals);
__ shift_right (r0, parameter_bytes, LogBytesPerWord);
__ mtctr (r0);
__ bind (loop);
__ load (r0, Address(src, 0));
__ store (r0, Address(dst, 0));
__ addi (src, src, wordSize);
__ subi (dst, dst, wordSize);
__ bdnz (loop);
__ bind (done);
}
// Make the call
__ mr (Rmethod, method);
__ mr (Rlocals, locals);
__ mr (Rthread, thread);
__ mtctr (entry_point);
__ bctrl();
// This is used to identify call_stub stack frames
return_address = __ pc();
// Figure out where our stuff is stored
__ load (locals, Address(r1, 0));
__ subi (locals, locals, final_offset * wordSize);
#ifdef ASSERT
// Rlocals should contain the address we just calculated.
{
StackFrame frame;
Label label;
__ compare (Rlocals, locals);
__ beq (label);
__ prolog (frame);
__ should_not_reach_here (__FILE__, __LINE__);
__ epilog (frame);
__ blr ();
__ bind (label);
}
#endif // ASSERT
// Is an exception being thrown?
Label exit;
__ load (r0, Address(Rthread, Thread::pending_exception_offset()));
__ compare (r0, 0);
__ bne (exit);
// Store result depending on type
const Register result_addr = r6;
Label is_int, is_long, is_object;
offset = initial_offset + 1; // skip call_wrapper
__ load (result_addr, Address(locals, offset++ * wordSize));
__ load (result_type, Address(locals, offset++ * wordSize));
__ compare (result_type, T_INT);
__ beq (is_int);
__ compare (result_type, T_LONG);
__ beq (is_long);
__ compare (result_type, T_OBJECT);
__ beq (is_object);
__ should_not_reach_here (__FILE__, __LINE__);
__ bind (is_int);
__ stw (r3, Address(result_addr, 0));
__ b (exit);
__ bind (is_long);
#ifdef PPC32
__ store (r4, Address(result_addr, wordSize));
#endif
__ store (r3, Address(result_addr, 0));
__ b (exit);
__ bind (is_object);
__ store (r3, Address(result_addr, 0));
//__ b (exit);
// Restore the registers
__ bind (exit);
#ifdef PPC32
__ load (r0, Address(locals, offset++ * wordSize));
__ mtcr (r0);
#endif // PPC32
for (int i = 14; i < 32; i++) {
__ load (as_Register(i), Address(locals, offset++ * wordSize));
}
#ifdef PPC64
__ load (r0, Address(r1, StackFrame::cr_save_offset * wordSize));
__ mtcr (r0);
#endif // PPC64
assert (offset == final_offset, "save and restore must match");
// Unwind and return
__ load (r1, Address(r1, StackFrame::back_chain_offset * wordSize));
__ load (r0, Address(r1, StackFrame::lr_save_offset * wordSize));
__ mtlr (r0);
__ blr ();
return start;
}
address InterpreterGenerator::generate_normal_entry(bool synchronized)
{
assert_different_registers(Rmethod, Rlocals, Rthread, Rstate, Rmonitor);
Label re_dispatch;
Label call_interpreter;
Label call_method;
Label call_non_interpreted_method;
Label return_with_exception;
Label return_from_method;
Label resume_interpreter;
Label return_to_initial_caller;
Label more_monitors;
Label throwing_exception;
// We use the same code for synchronized and not
if (normal_entry)
return normal_entry;
address start = __ pc();
// There are two ways in which we can arrive at this entry.
// There is the special case where a normal interpreted method
// calls another normal interpreted method, and there is the
// general case of when we enter from somewhere else: from
// call_stub, from C1 or C2, or from a fast accessor which
// deferred. In the special case we're already in frame manager
// code: we arrive at re_dispatch with Rstate containing the
// previous interpreter state. In the general case we arrive
// at start with no previous interpreter state so we set Rstate
// to NULL to indicate this.
__ bind (fast_accessor_slow_entry_path);
__ load (Rstate, 0);
__ bind (re_dispatch);
// Adjust the caller's stack frame to accomodate any additional
// local variables we have contiguously with our parameters.
generate_adjust_callers_stack();
// Allocate and initialize our stack frame.
generate_compute_interpreter_state(false);
// Call the interpreter ==============================================
__ bind (call_interpreter);
// We can setup the frame anchor with everything we want at
// this point as we are thread_in_Java and no safepoints can
// occur until we go to vm mode. We do have to clear flags
// on return from vm but that is it
__ set_last_Java_frame ();
// Call interpreter
address interpreter = JvmtiExport::can_post_interpreter_events() ?
CAST_FROM_FN_PTR(address, BytecodeInterpreter::runWithChecks) :
CAST_FROM_FN_PTR(address, BytecodeInterpreter::run);
__ mr (r3, Rstate);
__ call (interpreter);
__ fixup_after_potential_safepoint ();
// Clear the frame anchor
__ reset_last_Java_frame ();
// Examine the message from the interpreter to decide what to do
__ lwz (r4, STATE(_msg));
__ compare (r4, BytecodeInterpreter::call_method);
__ beq (call_method);
__ compare (r4, BytecodeInterpreter::return_from_method);
__ beq (return_from_method);
__ compare (r4, BytecodeInterpreter::more_monitors);
__ beq (more_monitors);
__ compare (r4, BytecodeInterpreter::throwing_exception);
__ beq (throwing_exception);
__ load (r3, (intptr_t) "error: bad message from interpreter: %d\n");
__ call (CAST_FROM_FN_PTR(address, printf));
__ should_not_reach_here (__FILE__, __LINE__);
// Handle a call_method message ======================================
__ bind (call_method);
__ load (Rmethod, STATE(_result._to_call._callee));
__ verify_oop(Rmethod);
__ load (Rlocals, STATE(_stack));
__ lhz (r0, Address(Rmethod, methodOopDesc::size_of_parameters_offset()));
__ shift_left (r0, r0, LogBytesPerWord);
__ add (Rlocals, Rlocals, r0);
__ load (r0, STATE(_result._to_call._callee_entry_point));
__ load (r3, (intptr_t) start);
__ compare (r0, r3);
__ bne (call_non_interpreted_method);
// Interpreted methods are intercepted and re-dispatched -----------
__ load (r0, CAST_FROM_FN_PTR(intptr_t, RecursiveInterpreterActivation));
__ mtlr (r0);
__ b (re_dispatch);
// Non-interpreted methods are dispatched normally -----------------
__ bind (call_non_interpreted_method);
__ mtctr (r0);
__ bctrl ();
// Restore Rstate
__ load (Rstate, Address(r1, StackFrame::back_chain_offset * wordSize));
__ subi (Rstate, Rstate, sizeof(BytecodeInterpreter));
// Check for pending exceptions
__ load (r0, Address(Rthread, Thread::pending_exception_offset()));
__ compare (r0, 0);
__ bne (return_with_exception);
// Convert the result and resume
generate_convert_result(CppInterpreter::_tosca_to_stack);
__ b (resume_interpreter);
// Handle a return_from_method message ===============================
__ bind (return_from_method);
__ load (r0, STATE(_prev_link));
__ compare (r0, 0);
__ beq (return_to_initial_caller);
// "Return" from a re-dispatch -------------------------------------
generate_convert_result(CppInterpreter::_stack_to_stack);
generate_unwind_interpreter_state();
// Resume the interpreter
__ bind (resume_interpreter);
__ store (Rlocals, STATE(_stack));
__ load (Rlocals, STATE(_locals));
__ load (Rmethod, STATE(_method));
__ verify_oop(Rmethod);
__ load (r0, BytecodeInterpreter::method_resume);
__ stw (r0, STATE(_msg));
__ b (call_interpreter);
// Return to the initial caller (call_stub etc) --------------------
__ bind (return_to_initial_caller);
generate_convert_result(CppInterpreter::_stack_to_native_abi);
generate_unwind_interpreter_state();
__ blr ();
// Handle a more_monitors message ====================================
__ bind (more_monitors);
generate_more_monitors();
__ load (r0, BytecodeInterpreter::got_monitors);
__ stw (r0, STATE(_msg));
__ b (call_interpreter);
// Handle a throwing_exception message ===============================
__ bind (throwing_exception);
// Check we actually have an exception
#ifdef ASSERT
{
Label ok;
__ load (r0, Address(Rthread, Thread::pending_exception_offset()));
__ compare (r0, 0);
__ bne (ok);
__ should_not_reach_here (__FILE__, __LINE__);
__ bind (ok);
}
#endif
// Return to wherever
generate_unwind_interpreter_state();
__ bind (return_with_exception);
__ compare (Rstate, 0);
__ bne (resume_interpreter);
__ blr ();
normal_entry = start;
return start;
}
address InterpreterGenerator::generate_native_entry(bool synchronized)
{
const Register handler = r14;
const Register function = r15;
assert_different_registers(Rmethod, Rlocals, Rthread, Rstate, Rmonitor,
handler, function);
// We use the same code for synchronized and not
if (native_entry)
return native_entry;
address start = __ pc();
// Allocate and initialize our stack frame.
__ load (Rstate, 0);
generate_compute_interpreter_state(true);
// Make sure method is native and not abstract
#ifdef ASSERT
{
Label ok;
__ lwz (r0, Address(Rmethod, methodOopDesc::access_flags_offset()));
__ andi_ (r0, r0, JVM_ACC_NATIVE | JVM_ACC_ABSTRACT);
__ compare (r0, JVM_ACC_NATIVE);
__ beq (ok);
__ should_not_reach_here (__FILE__, __LINE__);
__ bind (ok);
}
#endif
// Lock if necessary
Label not_synchronized_1;
__ bne (CRsync, not_synchronized_1);
__ lock_object (Rmonitor);
__ bind (not_synchronized_1);
// Get signature handler
const Address signature_handler_addr(
Rmethod, methodOopDesc::signature_handler_offset());
Label return_to_caller, got_signature_handler;
__ load (handler, signature_handler_addr);
__ compare (handler, 0);
__ bne (got_signature_handler);
__ call_VM (noreg,
CAST_FROM_FN_PTR(address,
InterpreterRuntime::prepare_native_call),
Rmethod,
CALL_VM_NO_EXCEPTION_CHECKS);
__ load (r0, Address(Rthread, Thread::pending_exception_offset()));
__ compare (r0, 0);
__ bne (return_to_caller);
__ load (handler, signature_handler_addr);
__ bind (got_signature_handler);
// Get the native function entry point
const Address native_function_addr(
Rmethod, methodOopDesc::native_function_offset());
Label got_function;
__ load (function, native_function_addr);
#ifdef ASSERT
{
// InterpreterRuntime::prepare_native_call() sets the mirror
// handle and native function address first and the signature
// handler last, so function should always be set here.
Label ok;
__ compare (function, 0);
__ bne (ok);
__ should_not_reach_here (__FILE__, __LINE__);
__ bind (ok);
}
#endif
// Call signature handler
__ mtctr (handler);
__ bctrl ();
__ mr (handler, r0);
// Pass JNIEnv
__ la (r3, Address(Rthread, JavaThread::jni_environment_offset()));
// Pass mirror handle if static
const Address oop_temp_addr = STATE(_oop_temp);
Label not_static;
__ bne (CRstatic, not_static);
__ get_mirror_handle (r4);
__ store (r4, oop_temp_addr);
__ la (r4, oop_temp_addr);
__ bind (not_static);
// Set up the Java frame anchor
__ set_last_Java_frame ();
// Change the thread state to native
const Address thread_state_addr(Rthread, JavaThread::thread_state_offset());
#ifdef ASSERT
{
Label ok;
__ lwz (r0, thread_state_addr);
__ compare (r0, _thread_in_Java);
__ beq (ok);
__ should_not_reach_here (__FILE__, __LINE__);
__ bind (ok);
}
#endif
__ load (r0, _thread_in_native);
__ stw (r0, thread_state_addr);
// Make the call
__ call (function);
__ fixup_after_potential_safepoint ();
// The result will be in r3 (and maybe r4 on 32-bit) or f1.
// Wherever it is, we need to store it before calling anything
const Register r3_save = r16;
#ifdef PPC32
const Register r4_save = r17;
#endif
const FloatRegister f1_save = f14;
__ mr (r3_save, r3);
#ifdef PPC32
__ mr (r4_save, r4);
#endif
__ fmr (f1_save, f1);
// Switch thread to "native transition" state before reading the
// synchronization state. This additional state is necessary
// because reading and testing the synchronization state is not
// atomic with respect to garbage collection.
__ load (r0, _thread_in_native_trans);
__ stw (r0, thread_state_addr);
// Ensure the new state is visible to the VM thread.
if(os::is_MP()) {
if (UseMembar)
__ sync ();
else
__ serialize_memory (r3, r4);
}
// Check for safepoint operation in progress and/or pending
// suspend requests. We use a leaf call in order to leave
// the last_Java_frame setup undisturbed.
Label block, no_block;
__ load (r3, (intptr_t) SafepointSynchronize::address_of_state());
__ lwz (r0, Address(r3, 0));
__ compare (r0, SafepointSynchronize::_not_synchronized);
__ bne (block);
__ lwz (r0, Address(Rthread, JavaThread::suspend_flags_offset()));
__ compare (r0, 0);
__ beq (no_block);
__ bind (block);
__ call_VM_leaf (
CAST_FROM_FN_PTR(address,
JavaThread::check_special_condition_for_native_trans));
__ fixup_after_potential_safepoint ();
__ bind (no_block);
// Change the thread state
__ load (r0, _thread_in_Java);
__ stw (r0, thread_state_addr);
// Reset the frame anchor
__ reset_last_Java_frame ();
// If the result was an OOP then unbox it and store it in the frame
// (where it will be safe from garbage collection) before we release
// the handle it might be protected by
Label non_oop, store_oop;
__ load (r0, (intptr_t) AbstractInterpreter::result_handler(T_OBJECT));
__ compare (r0, handler);
__ bne (non_oop);
__ compare (r3_save, 0);
__ beq (store_oop);
__ load (r3_save, Address(r3_save, 0));
__ bind (store_oop);
__ store (r3_save, STATE(_oop_temp));
__ bind (non_oop);
// Reset handle block
__ load (r3, Address(Rthread, JavaThread::active_handles_offset()));
__ load (r0, 0);
__ stw (r0, Address(r3, JNIHandleBlock::top_offset_in_bytes()));
// If there is an exception we skip the result handler and return.
// Note that this also skips unlocking which seems totally wrong,
// but apparently this is what the asm interpreter does so we do
// too.
__ load (r0, Address(Rthread, Thread::pending_exception_offset()));
__ compare (r0, 0);
__ bne (return_to_caller);
// Unlock if necessary
Label not_synchronized_2;
__ bne (CRsync, not_synchronized_2);
__ unlock_object (Rmonitor);
__ bind (not_synchronized_2);
// Restore saved result and call the result handler
__ mr (r3, r3_save);
#ifdef PPC32
__ mr (r4, r4_save);
#endif
__ fmr (f1, f1_save);
__ mtctr (handler);
__ bctrl ();
// Unwind the current activation and return
__ bind (return_to_caller);
generate_unwind_interpreter_state();
__ blr ();
native_entry = start;
return start;
}
address InterpreterGenerator::generate_accessor_entry()
{
if (!UseFastAccessorMethods)
return NULL;
Label& slow_path = fast_accessor_slow_entry_path;
address start = __ pc();
// Drop into the slow path if we need a safepoint check.
__ load (r3, (intptr_t) SafepointSynchronize::address_of_state());
__ load (r0, Address(r3, 0));
__ compare (r0, SafepointSynchronize::_not_synchronized);
__ bne (slow_path);
// Load the object pointer and drop into the slow path
// if we have a NullPointerException.
const Register object = r4;
__ load (object, Address(Rlocals, 0));
__ compare (object, 0);
__ beq (slow_path);
// Read the field index from the bytecode, which looks like this:
// 0: 0x2a: aload_0
// 1: 0xb4: getfield
// 2: index (high byte)
// 3: index (low byte)
// 4: 0xac/b0: ireturn/areturn
const Register index = r5;
__ load (index, Address(Rmethod, methodOopDesc::const_offset()));
__ lwz (index, Address(index, constMethodOopDesc::codes_offset()));
#ifdef ASSERT
{
Label ok;
__ shift_right (r0, index, 16);
__ compare (r0, (Bytecodes::_aload_0 << 8) | Bytecodes::_getfield);
__ beq (ok);
__ should_not_reach_here (__FILE__, __LINE__);
__ bind (ok);
}
#endif
__ andi_ (index, index, 0xffff);
// Locate the entry in the constant pool cache
const Register entry = r6;
__ load (entry, Address(Rmethod, methodOopDesc::constants_offset()));
__ load (entry, Address(entry,constantPoolOopDesc::cache_offset_in_bytes()));
__ la (entry, Address(entry, constantPoolCacheOopDesc::base_offset()));
__ shift_left(r0, index,
exact_log2(in_words(ConstantPoolCacheEntry::size())) + LogBytesPerWord);
__ add (entry, entry, r0);
// Check the validity of the cache entry by testing whether the
// _indices field contains Bytecode::_getfield in b1 byte.
__ load (r0, Address(entry, ConstantPoolCacheEntry::indices_offset()));
__ shift_right (r0, r0, 16);
__ andi_ (r0, r0, 0xff);
__ compare (r0, Bytecodes::_getfield);
__ bne (slow_path);
// Calculate the type and offset of the field
const Register offset = r7;
const Register type = r8;
__ load (offset, Address(entry, ConstantPoolCacheEntry::f2_offset()));
__ load (type, Address(entry, ConstantPoolCacheEntry::flags_offset()));
ConstantPoolCacheEntry::verify_tosBits();
__ shift_right (type, type, ConstantPoolCacheEntry::tosBits);
// Load the value
Label is_object, is_int, is_byte, is_short, is_char;
__ compare (type, atos);
__ beq (is_object);
__ compare (type, itos);
__ beq (is_int);
__ compare (type, btos);
__ beq (is_byte);
__ compare (type, stos);
__ beq (is_short);
__ compare (type, ctos);
__ beq (is_char);
__ load (r3, (intptr_t) "error: unknown type: %d\n");
__ mr (r4, type);
__ call (CAST_FROM_FN_PTR(address, printf));
__ should_not_reach_here (__FILE__, __LINE__);
__ bind (is_object);
__ load_indexed (r3, object, offset);
__ blr ();
__ bind (is_int);
__ lwax (r3, object, offset);
__ blr ();
__ bind (is_byte);
__ lbax (r3, object, offset);
__ blr ();
__ bind (is_short);
__ lhax (r3, object, offset);
__ blr ();
__ bind (is_char);
__ lhzx (r3, object, offset);
__ blr ();
return start;
}
// Call an accessor method (assuming it is resolved, otherwise drop into
// vanilla (slow path) entry.
address InterpreterGenerator::generate_accessor_entry(void) {
if (!UseFastAccessorMethods && (!FLAG_IS_ERGO(UseFastAccessorMethods))) {
return NULL;
}
Label Lslow_path, Lacquire;
const Register
Rclass_or_obj = R3_ARG1,
Rconst_method = R4_ARG2,
Rcodes = Rconst_method,
Rcpool_cache = R5_ARG3,
Rscratch = R11_scratch1,
Rjvmti_mode = Rscratch,
Roffset = R12_scratch2,
Rflags = R6_ARG4,
Rbtable = R7_ARG5;
static address branch_table[number_of_states];
address entry = __ pc();
// Check for safepoint:
// Ditch this, real man don't need safepoint checks.
// Also check for JVMTI mode
// Check for null obj, take slow path if so.
__ ld(Rclass_or_obj, Interpreter::stackElementSize, CC_INTERP_ONLY(R17_tos) NOT_CC_INTERP(R15_esp));
__ lwz(Rjvmti_mode, thread_(interp_only_mode));
__ cmpdi(CCR1, Rclass_or_obj, 0);
__ cmpwi(CCR0, Rjvmti_mode, 0);
__ crorc(/*CCR0 eq*/2, /*CCR1 eq*/4+2, /*CCR0 eq*/2);
__ beq(CCR0, Lslow_path); // this==null or jvmti_mode!=0
// Do 2 things in parallel:
// 1. Load the index out of the first instruction word, which looks like this:
// <0x2a><0xb4><index (2 byte, native endianess)>.
// 2. Load constant pool cache base.
__ ld(Rconst_method, in_bytes(Method::const_offset()), R19_method);
__ ld(Rcpool_cache, in_bytes(ConstMethod::constants_offset()), Rconst_method);
__ lhz(Rcodes, in_bytes(ConstMethod::codes_offset()) + 2, Rconst_method); // Lower half of 32 bit field.
__ ld(Rcpool_cache, ConstantPool::cache_offset_in_bytes(), Rcpool_cache);
// Get the const pool entry by means of <index>.
const int codes_shift = exact_log2(in_words(ConstantPoolCacheEntry::size()) * BytesPerWord);
__ slwi(Rscratch, Rcodes, codes_shift); // (codes&0xFFFF)<<codes_shift
__ add(Rcpool_cache, Rscratch, Rcpool_cache);
// Check if cpool cache entry is resolved.
// We are resolved if the indices offset contains the current bytecode.
ByteSize cp_base_offset = ConstantPoolCache::base_offset();
// Big Endian:
__ lbz(Rscratch, in_bytes(cp_base_offset) + in_bytes(ConstantPoolCacheEntry::indices_offset()) + 7 - 2, Rcpool_cache);
__ cmpwi(CCR0, Rscratch, Bytecodes::_getfield);
__ bne(CCR0, Lslow_path);
__ isync(); // Order succeeding loads wrt. load of _indices field from cpool_cache.
// Finally, start loading the value: Get cp cache entry into regs.
__ ld(Rflags, in_bytes(cp_base_offset) + in_bytes(ConstantPoolCacheEntry::flags_offset()), Rcpool_cache);
__ ld(Roffset, in_bytes(cp_base_offset) + in_bytes(ConstantPoolCacheEntry::f2_offset()), Rcpool_cache);
// Following code is from templateTable::getfield_or_static
// Load pointer to branch table
__ load_const_optimized(Rbtable, (address)branch_table, Rscratch);
// Get volatile flag
__ rldicl(Rscratch, Rflags, 64-ConstantPoolCacheEntry::is_volatile_shift, 63); // extract volatile bit
// note: sync is needed before volatile load on PPC64
// Check field type
__ rldicl(Rflags, Rflags, 64-ConstantPoolCacheEntry::tos_state_shift, 64-ConstantPoolCacheEntry::tos_state_bits);
#ifdef ASSERT
Label LFlagInvalid;
__ cmpldi(CCR0, Rflags, number_of_states);
__ bge(CCR0, LFlagInvalid);
__ ld(R9_ARG7, 0, R1_SP);
__ ld(R10_ARG8, 0, R21_sender_SP);
__ cmpd(CCR0, R9_ARG7, R10_ARG8);
__ asm_assert_eq("backlink", 0x543);
#endif // ASSERT
__ mr(R1_SP, R21_sender_SP); // Cut the stack back to where the caller started.
// Load from branch table and dispatch (volatile case: one instruction ahead)
__ sldi(Rflags, Rflags, LogBytesPerWord);
__ cmpwi(CCR6, Rscratch, 1); // volatile?
if (support_IRIW_for_not_multiple_copy_atomic_cpu) {
__ sldi(Rscratch, Rscratch, exact_log2(BytesPerInstWord)); // volatile ? size of 1 instruction : 0
}
__ ldx(Rbtable, Rbtable, Rflags);
if (support_IRIW_for_not_multiple_copy_atomic_cpu) {
__ subf(Rbtable, Rscratch, Rbtable); // point to volatile/non-volatile entry point
}
__ mtctr(Rbtable);
__ bctr();
#ifdef ASSERT
__ bind(LFlagInvalid);
__ stop("got invalid flag", 0x6541);
bool all_uninitialized = true,
all_initialized = true;
for (int i = 0; i<number_of_states; ++i) {
all_uninitialized = all_uninitialized && (branch_table[i] == NULL);
all_initialized = all_initialized && (branch_table[i] != NULL);
}
assert(all_uninitialized != all_initialized, "consistency"); // either or
__ fence(); // volatile entry point (one instruction before non-volatile_entry point)
if (branch_table[vtos] == 0) branch_table[vtos] = __ pc(); // non-volatile_entry point
if (branch_table[dtos] == 0) branch_table[dtos] = __ pc(); // non-volatile_entry point
if (branch_table[ftos] == 0) branch_table[ftos] = __ pc(); // non-volatile_entry point
__ stop("unexpected type", 0x6551);
#endif
if (branch_table[itos] == 0) { // generate only once
__ align(32, 28, 28); // align load
__ fence(); // volatile entry point (one instruction before non-volatile_entry point)
branch_table[itos] = __ pc(); // non-volatile_entry point
__ lwax(R3_RET, Rclass_or_obj, Roffset);
__ beq(CCR6, Lacquire);
__ blr();
}
if (branch_table[ltos] == 0) { // generate only once
__ align(32, 28, 28); // align load
__ fence(); // volatile entry point (one instruction before non-volatile_entry point)
branch_table[ltos] = __ pc(); // non-volatile_entry point
__ ldx(R3_RET, Rclass_or_obj, Roffset);
__ beq(CCR6, Lacquire);
__ blr();
}
if (branch_table[btos] == 0) { // generate only once
__ align(32, 28, 28); // align load
__ fence(); // volatile entry point (one instruction before non-volatile_entry point)
branch_table[btos] = __ pc(); // non-volatile_entry point
__ lbzx(R3_RET, Rclass_or_obj, Roffset);
__ extsb(R3_RET, R3_RET);
__ beq(CCR6, Lacquire);
__ blr();
}
if (branch_table[ctos] == 0) { // generate only once
__ align(32, 28, 28); // align load
__ fence(); // volatile entry point (one instruction before non-volatile_entry point)
branch_table[ctos] = __ pc(); // non-volatile_entry point
__ lhzx(R3_RET, Rclass_or_obj, Roffset);
__ beq(CCR6, Lacquire);
__ blr();
}
if (branch_table[stos] == 0) { // generate only once
__ align(32, 28, 28); // align load
__ fence(); // volatile entry point (one instruction before non-volatile_entry point)
branch_table[stos] = __ pc(); // non-volatile_entry point
__ lhax(R3_RET, Rclass_or_obj, Roffset);
__ beq(CCR6, Lacquire);
__ blr();
}
if (branch_table[atos] == 0) { // generate only once
__ align(32, 28, 28); // align load
__ fence(); // volatile entry point (one instruction before non-volatile_entry point)
branch_table[atos] = __ pc(); // non-volatile_entry point
__ load_heap_oop(R3_RET, (RegisterOrConstant)Roffset, Rclass_or_obj);
__ verify_oop(R3_RET);
//__ dcbt(R3_RET); // prefetch
__ beq(CCR6, Lacquire);
__ blr();
}
__ align(32, 12);
__ bind(Lacquire);
__ twi_0(R3_RET);
__ isync(); // acquire
__ blr();
#ifdef ASSERT
for (int i = 0; i<number_of_states; ++i) {
assert(branch_table[i], "accessor_entry initialization");
//tty->print_cr("accessor_entry: branch_table[%d] = 0x%llx (opcode 0x%llx)", i, branch_table[i], *((unsigned int*)branch_table[i]));
}
#endif
__ bind(Lslow_path);
__ branch_to_entry(Interpreter::entry_for_kind(Interpreter::zerolocals), Rscratch);
__ flush();
return entry;
}
// Interpreter intrinsic for WeakReference.get().
// 1. Don't push a full blown frame and go on dispatching, but fetch the value
// into R8 and return quickly
// 2. If G1 is active we *must* execute this intrinsic for corrrectness:
// It contains a GC barrier which puts the reference into the satb buffer
// to indicate that someone holds a strong reference to the object the
// weak ref points to!
address InterpreterGenerator::generate_Reference_get_entry(void) {
// Code: _aload_0, _getfield, _areturn
// parameter size = 1
//
// The code that gets generated by this routine is split into 2 parts:
// 1. the "intrinsified" code for G1 (or any SATB based GC),
// 2. the slow path - which is an expansion of the regular method entry.
//
// Notes:
// * In the G1 code we do not check whether we need to block for
// a safepoint. If G1 is enabled then we must execute the specialized
// code for Reference.get (except when the Reference object is null)
// so that we can log the value in the referent field with an SATB
// update buffer.
// If the code for the getfield template is modified so that the
// G1 pre-barrier code is executed when the current method is
// Reference.get() then going through the normal method entry
// will be fine.
// * The G1 code can, however, check the receiver object (the instance
// of java.lang.Reference) and jump to the slow path if null. If the
// Reference object is null then we obviously cannot fetch the referent
// and so we don't need to call the G1 pre-barrier. Thus we can use the
// regular method entry code to generate the NPE.
//
// This code is based on generate_accessor_enty.
address entry = __ pc();
const int referent_offset = java_lang_ref_Reference::referent_offset;
guarantee(referent_offset > 0, "referent offset not initialized");
if (UseG1GC) {
Label slow_path;
// Debugging not possible, so can't use __ skip_if_jvmti_mode(slow_path, GR31_SCRATCH);
// In the G1 code we don't check if we need to reach a safepoint. We
// continue and the thread will safepoint at the next bytecode dispatch.
// If the receiver is null then it is OK to jump to the slow path.
__ ld(R3_RET, Interpreter::stackElementSize, CC_INTERP_ONLY(R17_tos) NOT_CC_INTERP(R15_esp)); // get receiver
// Check if receiver == NULL and go the slow path.
__ cmpdi(CCR0, R3_RET, 0);
__ beq(CCR0, slow_path);
// Load the value of the referent field.
__ load_heap_oop(R3_RET, referent_offset, R3_RET);
// Generate the G1 pre-barrier code to log the value of
// the referent field in an SATB buffer. Note with
// these parameters the pre-barrier does not generate
// the load of the previous value.
// Restore caller sp for c2i case.
#ifdef ASSERT
__ ld(R9_ARG7, 0, R1_SP);
__ ld(R10_ARG8, 0, R21_sender_SP);
__ cmpd(CCR0, R9_ARG7, R10_ARG8);
__ asm_assert_eq("backlink", 0x544);
#endif // ASSERT
__ mr(R1_SP, R21_sender_SP); // Cut the stack back to where the caller started.
__ g1_write_barrier_pre(noreg, // obj
noreg, // offset
R3_RET, // pre_val
R11_scratch1, // tmp
R12_scratch2, // tmp
true); // needs_frame
__ blr();
// Generate regular method entry.
__ bind(slow_path);
__ branch_to_entry(Interpreter::entry_for_kind(Interpreter::zerolocals), R11_scratch1);
__ flush();
return entry;
} else {
return generate_accessor_entry();
}
}
address AbstractInterpreterGenerator::generate_slow_signature_handler() {
// Slow_signature handler that respects the PPC C calling conventions.
//
// We get called by the native entry code with our output register
// area == 8. First we call InterpreterRuntime::get_result_handler
// to copy the pointer to the signature string temporarily to the
// first C-argument and to return the result_handler in
// R3_RET. Since native_entry will copy the jni-pointer to the
// first C-argument slot later on, it is OK to occupy this slot
// temporarilly. Then we copy the argument list on the java
// expression stack into native varargs format on the native stack
// and load arguments into argument registers. Integer arguments in
// the varargs vector will be sign-extended to 8 bytes.
//
// On entry:
// R3_ARG1 - intptr_t* Address of java argument list in memory.
// R15_prev_state - BytecodeInterpreter* Address of interpreter state for
// this method
// R19_method
//
// On exit (just before return instruction):
// R3_RET - contains the address of the result_handler.
// R4_ARG2 - is not updated for static methods and contains "this" otherwise.
// R5_ARG3-R10_ARG8: - When the (i-2)th Java argument is not of type float or double,
// ARGi contains this argument. Otherwise, ARGi is not updated.
// F1_ARG1-F13_ARG13 - contain the first 13 arguments of type float or double.
const int LogSizeOfTwoInstructions = 3;
// FIXME: use Argument:: GL: Argument names different numbers!
const int max_fp_register_arguments = 13;
const int max_int_register_arguments = 6; // first 2 are reserved
const Register arg_java = R21_tmp1;
const Register arg_c = R22_tmp2;
const Register signature = R23_tmp3; // is string
const Register sig_byte = R24_tmp4;
const Register fpcnt = R25_tmp5;
const Register argcnt = R26_tmp6;
const Register intSlot = R27_tmp7;
const Register target_sp = R28_tmp8;
const FloatRegister floatSlot = F0;
address entry = __ function_entry();
__ save_LR_CR(R0);
__ save_nonvolatile_gprs(R1_SP, _spill_nonvolatiles_neg(r14));
// We use target_sp for storing arguments in the C frame.
__ mr(target_sp, R1_SP);
__ push_frame_reg_args_nonvolatiles(0, R11_scratch1);
__ mr(arg_java, R3_ARG1);
__ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::get_signature), R16_thread, R19_method);
// Signature is in R3_RET. Signature is callee saved.
__ mr(signature, R3_RET);
// Get the result handler.
__ call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::get_result_handler), R16_thread, R19_method);
{
Label L;
// test if static
// _access_flags._flags must be at offset 0.
// TODO PPC port: requires change in shared code.
//assert(in_bytes(AccessFlags::flags_offset()) == 0,
// "MethodDesc._access_flags == MethodDesc._access_flags._flags");
// _access_flags must be a 32 bit value.
assert(sizeof(AccessFlags) == 4, "wrong size");
__ lwa(R11_scratch1/*access_flags*/, method_(access_flags));
// testbit with condition register.
__ testbitdi(CCR0, R0, R11_scratch1/*access_flags*/, JVM_ACC_STATIC_BIT);
__ btrue(CCR0, L);
// For non-static functions, pass "this" in R4_ARG2 and copy it
// to 2nd C-arg slot.
// We need to box the Java object here, so we use arg_java
// (address of current Java stack slot) as argument and don't
// dereference it as in case of ints, floats, etc.
__ mr(R4_ARG2, arg_java);
__ addi(arg_java, arg_java, -BytesPerWord);
__ std(R4_ARG2, _abi(carg_2), target_sp);
__ bind(L);
}
// Will be incremented directly after loop_start. argcnt=0
// corresponds to 3rd C argument.
__ li(argcnt, -1);
// arg_c points to 3rd C argument
__ addi(arg_c, target_sp, _abi(carg_3));
// no floating-point args parsed so far
__ li(fpcnt, 0);
Label move_intSlot_to_ARG, move_floatSlot_to_FARG;
Label loop_start, loop_end;
Label do_int, do_long, do_float, do_double, do_dontreachhere, do_object, do_array, do_boxed;
// signature points to '(' at entry
#ifdef ASSERT
__ lbz(sig_byte, 0, signature);
__ cmplwi(CCR0, sig_byte, '(');
__ bne(CCR0, do_dontreachhere);
#endif
__ bind(loop_start);
__ addi(argcnt, argcnt, 1);
__ lbzu(sig_byte, 1, signature);
__ cmplwi(CCR0, sig_byte, ')'); // end of signature
__ beq(CCR0, loop_end);
__ cmplwi(CCR0, sig_byte, 'B'); // byte
__ beq(CCR0, do_int);
__ cmplwi(CCR0, sig_byte, 'C'); // char
__ beq(CCR0, do_int);
__ cmplwi(CCR0, sig_byte, 'D'); // double
__ beq(CCR0, do_double);
__ cmplwi(CCR0, sig_byte, 'F'); // float
__ beq(CCR0, do_float);
__ cmplwi(CCR0, sig_byte, 'I'); // int
__ beq(CCR0, do_int);
__ cmplwi(CCR0, sig_byte, 'J'); // long
__ beq(CCR0, do_long);
__ cmplwi(CCR0, sig_byte, 'S'); // short
__ beq(CCR0, do_int);
__ cmplwi(CCR0, sig_byte, 'Z'); // boolean
__ beq(CCR0, do_int);
__ cmplwi(CCR0, sig_byte, 'L'); // object
__ beq(CCR0, do_object);
__ cmplwi(CCR0, sig_byte, '['); // array
__ beq(CCR0, do_array);
// __ cmplwi(CCR0, sig_byte, 'V'); // void cannot appear since we do not parse the return type
// __ beq(CCR0, do_void);
__ bind(do_dontreachhere);
__ unimplemented("ShouldNotReachHere in slow_signature_handler", 120);
__ bind(do_array);
{
Label start_skip, end_skip;
__ bind(start_skip);
__ lbzu(sig_byte, 1, signature);
__ cmplwi(CCR0, sig_byte, '[');
__ beq(CCR0, start_skip); // skip further brackets
__ cmplwi(CCR0, sig_byte, '9');
__ bgt(CCR0, end_skip); // no optional size
__ cmplwi(CCR0, sig_byte, '0');
__ bge(CCR0, start_skip); // skip optional size
__ bind(end_skip);
__ cmplwi(CCR0, sig_byte, 'L');
__ beq(CCR0, do_object); // for arrays of objects, the name of the object must be skipped
__ b(do_boxed); // otherwise, go directly to do_boxed
}
__ bind(do_object);
{
Label L;
__ bind(L);
__ lbzu(sig_byte, 1, signature);
__ cmplwi(CCR0, sig_byte, ';');
__ bne(CCR0, L);
}
// Need to box the Java object here, so we use arg_java (address of
// current Java stack slot) as argument and don't dereference it as
// in case of ints, floats, etc.
Label do_null;
__ bind(do_boxed);
__ ld(R0,0, arg_java);
__ cmpdi(CCR0, R0, 0);
__ li(intSlot,0);
__ beq(CCR0, do_null);
__ mr(intSlot, arg_java);
__ bind(do_null);
__ std(intSlot, 0, arg_c);
__ addi(arg_java, arg_java, -BytesPerWord);
__ addi(arg_c, arg_c, BytesPerWord);
__ cmplwi(CCR0, argcnt, max_int_register_arguments);
__ blt(CCR0, move_intSlot_to_ARG);
__ b(loop_start);
__ bind(do_int);
__ lwa(intSlot, 0, arg_java);
__ std(intSlot, 0, arg_c);
__ addi(arg_java, arg_java, -BytesPerWord);
__ addi(arg_c, arg_c, BytesPerWord);
__ cmplwi(CCR0, argcnt, max_int_register_arguments);
__ blt(CCR0, move_intSlot_to_ARG);
__ b(loop_start);
__ bind(do_long);
__ ld(intSlot, -BytesPerWord, arg_java);
__ std(intSlot, 0, arg_c);
__ addi(arg_java, arg_java, - 2 * BytesPerWord);
__ addi(arg_c, arg_c, BytesPerWord);
__ cmplwi(CCR0, argcnt, max_int_register_arguments);
__ blt(CCR0, move_intSlot_to_ARG);
__ b(loop_start);
__ bind(do_float);
__ lfs(floatSlot, 0, arg_java);
#if defined(LINUX)
// Linux uses ELF ABI. Both original ELF and ELFv2 ABIs have float
// in the least significant word of an argument slot.
#if defined(VM_LITTLE_ENDIAN)
__ stfs(floatSlot, 0, arg_c);
#else
__ stfs(floatSlot, 4, arg_c);
#endif
#elif defined(AIX)
// Although AIX runs on big endian CPU, float is in most significant
// word of an argument slot.
__ stfs(floatSlot, 0, arg_c);
#else
#error "unknown OS"
#endif
__ addi(arg_java, arg_java, -BytesPerWord);
__ addi(arg_c, arg_c, BytesPerWord);
__ cmplwi(CCR0, fpcnt, max_fp_register_arguments);
__ blt(CCR0, move_floatSlot_to_FARG);
__ b(loop_start);
__ bind(do_double);
__ lfd(floatSlot, - BytesPerWord, arg_java);
__ stfd(floatSlot, 0, arg_c);
__ addi(arg_java, arg_java, - 2 * BytesPerWord);
__ addi(arg_c, arg_c, BytesPerWord);
__ cmplwi(CCR0, fpcnt, max_fp_register_arguments);
__ blt(CCR0, move_floatSlot_to_FARG);
__ b(loop_start);
__ bind(loop_end);
__ pop_frame();
__ restore_nonvolatile_gprs(R1_SP, _spill_nonvolatiles_neg(r14));
__ restore_LR_CR(R0);
__ blr();
Label move_int_arg, move_float_arg;
__ bind(move_int_arg); // each case must consist of 2 instructions (otherwise adapt LogSizeOfTwoInstructions)
__ mr(R5_ARG3, intSlot); __ b(loop_start);
__ mr(R6_ARG4, intSlot); __ b(loop_start);
__ mr(R7_ARG5, intSlot); __ b(loop_start);
__ mr(R8_ARG6, intSlot); __ b(loop_start);
__ mr(R9_ARG7, intSlot); __ b(loop_start);
__ mr(R10_ARG8, intSlot); __ b(loop_start);
__ bind(move_float_arg); // each case must consist of 2 instructions (otherwise adapt LogSizeOfTwoInstructions)
__ fmr(F1_ARG1, floatSlot); __ b(loop_start);
__ fmr(F2_ARG2, floatSlot); __ b(loop_start);
__ fmr(F3_ARG3, floatSlot); __ b(loop_start);
__ fmr(F4_ARG4, floatSlot); __ b(loop_start);
__ fmr(F5_ARG5, floatSlot); __ b(loop_start);
__ fmr(F6_ARG6, floatSlot); __ b(loop_start);
__ fmr(F7_ARG7, floatSlot); __ b(loop_start);
__ fmr(F8_ARG8, floatSlot); __ b(loop_start);
__ fmr(F9_ARG9, floatSlot); __ b(loop_start);
__ fmr(F10_ARG10, floatSlot); __ b(loop_start);
__ fmr(F11_ARG11, floatSlot); __ b(loop_start);
__ fmr(F12_ARG12, floatSlot); __ b(loop_start);
__ fmr(F13_ARG13, floatSlot); __ b(loop_start);
__ bind(move_intSlot_to_ARG);
__ sldi(R0, argcnt, LogSizeOfTwoInstructions);
__ load_const(R11_scratch1, move_int_arg); // Label must be bound here.
__ add(R11_scratch1, R0, R11_scratch1);
__ mtctr(R11_scratch1/*branch_target*/);
__ bctr();
__ bind(move_floatSlot_to_FARG);
__ sldi(R0, fpcnt, LogSizeOfTwoInstructions);
__ addi(fpcnt, fpcnt, 1);
__ load_const(R11_scratch1, move_float_arg); // Label must be bound here.
__ add(R11_scratch1, R0, R11_scratch1);
__ mtctr(R11_scratch1/*branch_target*/);
__ bctr();
return entry;
}
address JNI_FastGetField::generate_fast_get_int_field0(BasicType type) {
const char *name;
switch (type) {
case T_BOOLEAN: name = "jni_fast_GetBooleanField"; break;
case T_BYTE: name = "jni_fast_GetByteField"; break;
case T_CHAR: name = "jni_fast_GetCharField"; break;
case T_SHORT: name = "jni_fast_GetShortField"; break;
case T_INT: name = "jni_fast_GetIntField"; break;
case T_LONG: name = "jni_fast_GetLongField"; break;
case T_FLOAT: name = "jni_fast_GetFloatField"; break;
case T_DOUBLE: name = "jni_fast_GetDoubleField"; break;
default: ShouldNotReachHere();
}
ResourceMark rm;
BufferBlob* blob = BufferBlob::create(name, BUFFER_SIZE);
CodeBuffer cbuf(blob);
MacroAssembler* masm = new MacroAssembler(&cbuf);
address fast_entry = __ pc();
Label slow;
unsigned long offset;
__ adrp(rcounter_addr,
SafepointSynchronize::safepoint_counter_addr(), offset);
Address safepoint_counter_addr(rcounter_addr, offset);
__ ldrw(rcounter, safepoint_counter_addr);
__ andw(rscratch1, rcounter, 1);
__ cbnzw(rscratch1, slow);
__ eor(robj, c_rarg1, rcounter);
__ eor(robj, robj, rcounter); // obj, since
// robj ^ rcounter ^ rcounter == robj
// robj is address dependent on rcounter.
__ ldr(robj, Address(robj, 0)); // *obj
__ lsr(roffset, c_rarg2, 2); // offset
assert(count < LIST_CAPACITY, "LIST_CAPACITY too small");
speculative_load_pclist[count] = __ pc(); // Used by the segfault handler
switch (type) {
case T_BOOLEAN: __ ldrb (result, Address(robj, roffset)); break;
case T_BYTE: __ ldrsb (result, Address(robj, roffset)); break;
case T_CHAR: __ ldrh (result, Address(robj, roffset)); break;
case T_SHORT: __ ldrsh (result, Address(robj, roffset)); break;
case T_FLOAT: __ ldrw (result, Address(robj, roffset)); break;
case T_INT: __ ldrsw (result, Address(robj, roffset)); break;
case T_DOUBLE:
case T_LONG: __ ldr (result, Address(robj, roffset)); break;
default: ShouldNotReachHere();
}
// counter_addr is address dependent on result.
__ eor(rcounter_addr, rcounter_addr, result);
__ eor(rcounter_addr, rcounter_addr, result);
__ ldrw(rscratch1, safepoint_counter_addr);
__ cmpw(rcounter, rscratch1);
__ br (Assembler::NE, slow);
switch (type) {
case T_FLOAT: __ fmovs(v0, result); break;
case T_DOUBLE: __ fmovd(v0, result); break;
default: __ mov(r0, result); break;
}
__ ret(lr);
slowcase_entry_pclist[count++] = __ pc();
__ bind(slow);
address slow_case_addr;
switch (type) {
case T_BOOLEAN: slow_case_addr = jni_GetBooleanField_addr(); break;
case T_BYTE: slow_case_addr = jni_GetByteField_addr(); break;
case T_CHAR: slow_case_addr = jni_GetCharField_addr(); break;
case T_SHORT: slow_case_addr = jni_GetShortField_addr(); break;
case T_INT: slow_case_addr = jni_GetIntField_addr(); break;
case T_LONG: slow_case_addr = jni_GetLongField_addr(); break;
case T_FLOAT: slow_case_addr = jni_GetFloatField_addr(); break;
case T_DOUBLE: slow_case_addr = jni_GetDoubleField_addr(); break;
default: ShouldNotReachHere();
}
{
__ enter();
__ lea(rscratch1, ExternalAddress(slow_case_addr));
__ blr(rscratch1);
__ maybe_isb();
__ leave();
__ ret(lr);
}
__ flush ();
return fast_entry;
}