C++ (Cpp) cpu_mmu_enabled Exemples

Exemple #1

Fichier : main.c Projet : yanyan-wrs/optee_os

vaddr_t pl310_base(void)
{
	static void *va __data; /* in case it's used before .bss is cleared */

	if (cpu_mmu_enabled()) {
		if (!va)
			va = phys_to_virt(PL310_BASE, MEM_AREA_IO_SEC);
		return (vaddr_t)va;
	}
	return PL310_BASE;
}

Exemple #2

Fichier : main.c Projet : Maroc-OS/optee_os

static vaddr_t console_base(void)
{
	static void *va;

	if (cpu_mmu_enabled()) {
		if (!va)
			va = phys_to_virt(CONSOLE_UART_BASE, MEM_AREA_IO_NSEC);
		return (vaddr_t)va;
	}
	return CONSOLE_UART_BASE;
}

Exemple #3

Fichier : main.c Projet : OP-TEE/optee_os

static vaddr_t sfr_base(void)
{
	static void *va;

	if (cpu_mmu_enabled()) {
		if (!va)
			va = phys_to_virt(SFR_BASE, MEM_AREA_IO_SEC);
		return (vaddr_t)va;
	}
	return SFR_BASE;
}

Exemple #4

Fichier : main.c Projet : OP-TEE/optee_os

vaddr_t matrix64_base(void)
{
	static void *va;

	if (cpu_mmu_enabled()) {
		if (!va)
			va = phys_to_virt(AT91C_BASE_MATRIX64, MEM_AREA_IO_SEC);
		return (vaddr_t)va;
	}
	return AT91C_BASE_MATRIX64;
}

Exemple #5

Fichier : main.c Projet : lorc/optee_os

static vaddr_t console_base(void)
{
	/* in case it's used before .bss is cleared */
	static void *va __early_bss;

	if (cpu_mmu_enabled()) {
		if (!va)
			va = phys_to_virt(UART_CONSOLE_BASE, MEM_AREA_IO_NSEC);
		return (vaddr_t)va;
	}
	return UART_CONSOLE_BASE;
}

Exemple #6

Fichier : main.c Projet : jbech-linaro/optee_os

static vaddr_t bckreg_base(void)
{
	static void *va;

	if (!cpu_mmu_enabled())
		return BKP_REGS_BASE + BKP_REGISTER_OFF;

	if (!va)
		va = phys_to_virt(BKP_REGS_BASE + BKP_REGISTER_OFF,
				  MEM_AREA_IO_SEC);

	return (vaddr_t)va;
}

Exemple #7

Fichier : dt.c Projet : jbech-linaro/optee_os

int dt_map_dev(const void *fdt, int offs, vaddr_t *base, size_t *size)
{
	enum teecore_memtypes mtype;
	paddr_t pbase;
	vaddr_t vbase;
	ssize_t sz;
	int st;

	assert(cpu_mmu_enabled());

	st = _fdt_get_status(fdt, offs);
	if (st == DT_STATUS_DISABLED)
		return -1;

	pbase = _fdt_reg_base_address(fdt, offs);
	if (pbase == (paddr_t)-1)
		return -1;
	sz = _fdt_reg_size(fdt, offs);
	if (sz < 0)
		return -1;

	if ((st & DT_STATUS_OK_SEC) && !(st & DT_STATUS_OK_NSEC))
		mtype = MEM_AREA_IO_SEC;
	else
		mtype = MEM_AREA_IO_NSEC;

	/* Check if we have a mapping, create one if needed */
	if (!core_mmu_add_mapping(mtype, pbase, sz)) {
		EMSG("Failed to map %zu bytes at PA 0x%"PRIxPA,
		     (size_t)sz, pbase);
		return -1;
	}
	vbase = (vaddr_t)phys_to_virt(pbase, mtype);
	if (!vbase) {
		EMSG("Failed to get VA for PA 0x%"PRIxPA, pbase);
		return -1;
	}

	*base = vbase;
	*size = sz;
	return 0;
}

Exemple #8

Fichier : main.c Projet : pascal-brand-st-dev/optee_os

		paddr_t pa;
		bool secure;
	} uarts[] = {
		[0] = { .pa = 0 },
		[1] = { .pa = USART1_BASE, .secure = true, },
		[2] = { .pa = USART2_BASE, .secure = false, },
		[3] = { .pa = USART3_BASE, .secure = false, },
		[4] = { .pa = UART4_BASE, .secure = false, },
		[5] = { .pa = UART5_BASE, .secure = false, },
		[6] = { .pa = USART6_BASE, .secure = false, },
		[7] = { .pa = UART7_BASE, .secure = false, },
		[8] = { .pa = UART8_BASE, .secure = false, },
	};

	COMPILE_TIME_ASSERT(ARRAY_SIZE(uarts) > CFG_STM32_EARLY_CONSOLE_UART);
	assert(!cpu_mmu_enabled());

	if (!uarts[CFG_STM32_EARLY_CONSOLE_UART].pa)
		return;

	/* No clock yet bound to the UART console */
	console_data.clock = DT_INFO_INVALID_CLOCK;

	console_data.secure = uarts[CFG_STM32_EARLY_CONSOLE_UART].secure;
	stm32_uart_init(&console_data, uarts[CFG_STM32_EARLY_CONSOLE_UART].pa);

	register_serial_console(&console_data.chip);

	IMSG("Early console on UART#%u", CFG_STM32_EARLY_CONSOLE_UART);
}

Exemple #9

Fichier : generic_boot.c Projet : jbech-linaro/optee_os

void *get_dt_blob(void)
{
	assert(cpu_mmu_enabled());
	return dt_blob_addr;
}