FormattedOutput& FormattedOutput::print(const char* str, size_t len) {
for (size_t i = 0; i < len; ++i) {
if (str[i] == '{') {
line_ << '{';
++offset_;
endl();
}
else if (str[i] == '}') {
endl();
--offset_;
print_offset();
line_ << '}';
endl();
}
else {
if (line_.str().empty() && !std::isspace(str[i])) {
print_offset();
line_ << str[i];
}
else if (!line_.str().empty())
line_ << str[i];
}
}
return *this;
}
status_t ArcHmbPlayerBinder::onTransact(uint32_t code, const Parcel& data, Parcel* reply, uint32_t flags) {
ALOGE("ArcHmbPlayerBinder::onTransact(%i) %i", code, flags);
/*
* Before executing actual method, check whether the RPC are from expected client.
* Client will write interface token, to identify interface to which those methods
* belong.
*/
if (!data.enforceInterface(ArcHmbPlayerInterface::DESCRIPTOR)) {
ALOGE("failed to check Interface, you might call wrong service, this is for '%s'",
String8(ArcHmbPlayerInterface::DESCRIPTOR).string());
return BAD_TYPE;
}
data.print(aout);
endl(aout);
switch(code) {
case ArcHmbPlayerInterface::PRINT: {
String16 msg = data.readString16();
print(String8(msg).string());
return NO_ERROR;
}
case ArcHmbPlayerInterface::ADD: {
int32_t a = data.readInt32();
int32_t b = data.readInt32();
int32_t sum = add(a, b);
ALOGE("ArcHmbPlayerBinder:onTransact add(%i, %i) = %i", a, b, sum);
reply->print(aout); endl(aout);
reply->writeInt32(sum);
return NO_ERROR;
}
default:
ALOGE("ArcHmbPlayerBinder, bad requesting code, no match found");
}
return BBinder::onTransact(code, data, reply, flags);
}
void ScribusQApp::showUsage()
{
QFile f;
f.open(stderr, QIODevice::WriteOnly);
QTextStream ts(&f);
ts << tr("Usage: scribus [option ... ] [file]") ; endl(ts);
ts << tr("Options:") ; endl(ts);
printArgLine(ts, ARG_FONTINFO_SHORT, ARG_FONTINFO, tr("Show information on the console when fonts are being loaded") );
printArgLine(ts, ARG_HELP_SHORT, ARG_HELP, tr("Print help (this message) and exit") );
printArgLine(ts, ARG_LANG_SHORT, ARG_LANG, tr("Uses xx as shortcut for a language, eg `en' or `de'") );
printArgLine(ts, ARG_AVAILLANG_SHORT, ARG_AVAILLANG, tr("List the currently installed interface languages") );
printArgLine(ts, ARG_NOSPLASH_SHORT, ARG_NOSPLASH, tr("Do not show the splashscreen on startup") );
printArgLine(ts, ARG_NEVERSPLASH_SHORT, ARG_NEVERSPLASH, tr("Stop the showing of the splashscreen on startup. Writes an empty file called .neversplash in ~/.scribus.") );
printArgLine(ts, ARG_PREFS_SHORT, QString(QString(ARG_PREFS) + QString(" ") + tr("filename")).toLocal8Bit().constData(), tr("Use filename as path for user given preferences") );
printArgLine(ts, ARG_PROFILEINFO_SHORT, ARG_PROFILEINFO, tr("Show location ICC profile information on console while starting") );
printArgLine(ts, ARG_SWAPDIABUTTONS_SHORT, ARG_SWAPDIABUTTONS, tr("Use right to left dialog button ordering (eg. Cancel/No/Yes instead of Yes/No/Cancel)") );
printArgLine(ts, ARG_UPGRADECHECK_SHORT, ARG_UPGRADECHECK, tr("Download a file from the Scribus website and show the latest available version.") );
printArgLine(ts, ARG_VERSION_SHORT, ARG_VERSION, tr("Output version information and exit") );
#if defined(_WIN32) && !defined(_CONSOLE)
printArgLine(ts, ARG_CONSOLE_SHORT, ARG_CONSOLE, tr("Display a console window") );
#endif
/* Delete me?
std::cout << "-file|-- name Open file 'name'" ; endl(ts);
std::cout << "name Open file 'name', the file name must not begin with '-'" ; endl(ts);
std::cout << "QT specific options as -display ..." ; endl(ts);
*/
endl(ts);
}
void
ZDriver::writeParserUtilDecl( std::ostream &out )
{
out << " void popStack( void );" << endl();
out << " ParserAct findParserAction( int &newVal, int tok );"
<< endl();
out << " void initTables( void );" << endl();
}
void
ZDriver::emitFuncBreak( std::ostream &out )
{
out << endl();
out << endl();
out << "////////////////////////////////////////" << endl();
out << endl();
out << endl();
}
void LanguageManager::printInstalledList()
{
QFile f;
f.open(stderr, QIODevice::WriteOnly);
QTextStream ts(&f);
for (int i = 0; i < langTable.size(); ++i)
{
ts << " " << langTable[i].m_priAbbrev.leftJustified(8) << ": " << langTable[i].m_name;
endl(ts);
}
endl(ts);
f.close();
}
void
ZDriver::writeAcceptFuncDecl( std::ostream &out )
{
const std::string &extraArg = getValue( "extra_argument" ).first;
if ( isValueSet( "parse_accept" ) )
{
if ( extraArg.empty() )
out << " void accept( void );" << endl();
else
out << " void accept( " << extraArg << " );" << endl();
}
}
void ScribusQApp::showAvailLangs()
{
QFile f;
f.open(stderr, QIODevice::WriteOnly);
QTextStream ts(&f);
ts << tr("Installed interface languages for Scribus are as follows:"); endl(ts);
endl(ts);
LanguageManager::instance()->printInstalledList();
endl(ts);
ts << tr("To override the default language choice:"); endl(ts);
ts << tr("scribus -l xx or scribus --lang xx, where xx is the language of choice."); endl(ts);
}
void
ZDriver::writeErrorRoutinesDecl( std::ostream &out )
{
const std::string &extraArg = getValue( "extra_argument" ).first;
out << " void syntaxError( " << getParserName()
<< "::Terminal tok, const Util::Any &data" << myExtraArg
<< " );" << endl();
if ( extraArg.empty() )
out << " void parseFailed( void );" << endl();
else
out << " void parseFailed( " << extraArg << " );" << endl();
}
void
ZDriver::writeStateTableDecl( std::ostream &out )
{
out << endl() << endl();
out << " typedef std::pair<ParserAct,int> ActionEntry;" << endl();
out << " typedef std::map<int,ActionEntry> ActionMap;" << endl();
out << " typedef std::vector<ActionMap> StateList;" << endl();
out << " typedef std::vector<ActionEntry> StateDefaultList;" << endl();
out << endl();
out << " StateList myStates;" << endl();
out << " StateDefaultList myStateDefaultActions;" << endl();
}
void
ZDriver::emitLineInfo( const std::string &srcFile,
size_t line,
std::ostream &out )
{
out << "#line " << line << " \"" << srcFile << "\"" << endl();
}
void LogBrowserDialog::save()
{
QString saveFileName = QFileDialog::getSaveFileName(this, tr("Save Log Output"),
tr("%1/logfile.txt").arg(QDir::homePath()),
tr("Text Files (*.txt);;All Files (*)"));
if (saveFileName.isEmpty()) {
return;
}
QFile file(saveFileName);
if (!file.open(QIODevice::WriteOnly)) {
QMessageBox::warning(this, tr("Error"), QString(tr("<nobr>File '%1'<br/>cannot be opened for writing.<br/><br/>"
"The log output could <b>not</b> be saved!</nobr>")).arg(saveFileName));
return;
}
QTextStream stream(&file);
for (int row = 0; row < _browser->rowCount(); row++) {
if (_browser->item(row, 0)) {
stream << tr("Warning: ");
}
stream << _browser->item(row, 1)->text();
endl(stream);
}
file.close();
}
void
ZDriver::writeImplClassCtorDtor( std::ostream &out )
{
emitFuncBreak( out );
out << myPimplName << "::" << myPimplName
<< "( void )" << endl();
out << " : myErrCount( -1 )" << endl();
out << "{" << endl();
out << " initTables();" << endl();
out << "}" << endl();
emitFuncBreak( out );
out << myPimplName << "::~" << myPimplName
<< "( void )" << endl();
out << "{" << endl();
out << " while ( ! myStack.empty() )" << endl();
out << " popStack();" << endl();
out << "}" << endl();
}
void drawBar()
{
out << "[";
const unsigned stop = value * width / max;
for(unsigned i = 0; i < width; ++i) {
out << (i <= stop? '*' : ' ');
}
out << "] " << std::min<int>(100, value * 100 / max + 1) << "\n";
endl();
}
bool PythonHandler::exportData(regina::NPacket* data, const QString& fileName,
QWidget* parentWidget) const {
regina::NScript* script = dynamic_cast<regina::NScript*>(data);
QFile f(fileName);
if (! f.open(QIODevice::WriteOnly)) {
ReginaSupport::warn(parentWidget,
QObject::tr("The export failed."),
QObject::tr("<qt>I could not write to the file <tt>%1</tt>.</qt>").
arg(fileName.toHtmlEscaped()));
return false;
}
QTextStream out(&f);
out.setCodec(ReginaPrefSet::importExportCodec());
// Write the name of the script.
out << "### " << scriptMarker << ' ';
out << QString(script->label().c_str());
endl(out);
out << "###";
endl(out);
// Output the value of each variable.
unsigned long i;
regina::NPacket* value;
for (i = 0; i < script->countVariables(); i++) {
value = script->variableValue(i);
out << "### " << varMarker
<< QString(script->variableName(i).c_str())
<< ": " << (value ? QString(value->label().c_str()) : "");
endl(out);
}
out << "###";
endl(out);
out << "### " << endMetadataMarker;
endl(out);
out << script->text().c_str();
// All done!
return true;
}
int main()
{
{
testbuf<char> sb;
std::ostream os(&sb);
endl(os);
assert(sb.str() == "\n");
assert(sync_called == 1);
assert(os.good());
}
{
testbuf<wchar_t> sb;
std::wostream os(&sb);
endl(os);
assert(sb.str() == L"\n");
assert(sync_called == 2);
assert(os.good());
}
}
void
ZDriver::writeStateTable( std::ostream &out )
{
size_t i, j, nState, nAct, nTotal;
nState = StateTable::get()->getNumStates();
// Count all actions
nTotal = 0;
for ( i = 0; i < nState; ++i )
{
State *stp = StateTable::get()->getNthState(i);
ActionList &ap = stp->getActions();
nAct = ap.getNumActions();
for ( j = 0; j < nAct; ++j )
{
Action &act = ap.getNthAction( j );
if ( ! act.isIgnoreType() )
nTotal++;
if ( act.getLookAhead() == SymbolTable::get()->getDefaultName() )
nTotal++;
}
}
out << "static int theStateTable[" << nTotal << "][4] =" << endl();
out << "{" << endl();
for ( i = 0; i < nState; ++i )
{
State *stp = StateTable::get()->getNthState(i);
ActionList &ap = stp->getActions();
nAct = ap.getNumActions();
for ( j = 0; j < nAct; ++j )
{
Action &act = ap.getNthAction( j );
if ( ! act.isIgnoreType() )
{
out << " // State " << i << endl();
out << " { " << i << ", " << act.getLookAheadSymbol()->getIndex() << ", ";
emitAction( act, out );
out << " }," << endl();
}
if ( act.getLookAhead() == SymbolTable::get()->getDefaultName() )
{
out << " // State " << i << " default action" << endl();
out << " { " << i << ", " << -1 << ", ";
emitAction( act, out );
out << " }," << endl();
}
}
}
out << "};" << endl();
}
void
ZDriver::writeAcceptFunc( std::ostream &out )
{
const std::string &extraArg = getValue( "extra_argument" ).first;
if ( isValueSet( "parse_accept" ) )
{
emitFuncBreak( out );
if ( extraArg.empty() )
out << "void " << myPimplName << "::accept( void )" << endl();
else
out << "void " << myPimplName << "::accept( "
<< extraArg << " )" << endl();
out << "{" << endl();
emitValue( getValue( "parse_accept" ), out );
out << "}" << endl();
}
}
void ScribusQApp::showHeader()
{
QFile f;
f.open(stderr, QIODevice::WriteOnly);
QTextStream ts(&f);
endl(ts);
QString heading( tr("Scribus, Open Source Desktop Publishing") );
// Build a separator of ----s the same width as the heading
QString separator = QString("").rightJustified(heading.length(),'-');
// Then output the heading, separator, and docs/www/etc info in an aligned table
const int urlwidth = 23;
const int descwidth = -(heading.length() - urlwidth - 1);
ts << heading; endl(ts);
ts << separator; endl(ts);
ts << QString("%1 %2").arg( tr("Homepage")+":", descwidth).arg("http://www.scribus.net" ); endl(ts);
ts << QString("%1 %2").arg( tr("Documentation")+":", descwidth).arg("http://docs.scribus.net"); endl(ts);
ts << QString("%1 %2").arg( tr("Wiki")+":", descwidth).arg("http://wiki.scribus.net"); endl(ts);
ts << QString("%1 %2").arg( tr("Issues")+":", descwidth).arg("http://bugs.scribus.net"); endl(ts);
endl(ts);
}
void
ZDriver::writeRuleTableDecl( std::ostream &out )
{
out << endl() << endl();
out << " // first is LHS, second is number of RHS" << endl();
out << " typedef std::pair<int,int> RuleInfo;" << endl();
out << " typedef std::vector<RuleInfo> RuleList;" << endl();
out << endl();
out << " RuleList myRules;" << endl();
}
//-------------------------------------------------------------------------------------------------
// begin of new line
log& log::beginLine(int col, int style)
{
if ( !isLineEnded )
{
*this << efont;
endl( *this );
}
*this << font(col, style);
isLineEnded = false;
return *this;
}
/*! \brief Format an arguments line for printing
Helper procedure */
static void printArgLine(QTextStream & ts, const char * smallArg,
const char* fullArg, const QString desc)
{
const char* lineformat = " %1, %2 %3";
const int saw = 4; // Short argument width
const int aw = -18; // Argument width (negative is left aligned)
QString line = QString(lineformat)
.arg(smallArg, saw)
.arg(fullArg, aw)
.arg(desc);
ts << line;
endl(ts);
}
void LirchChannel::persist() const {
if (stream) {
int num_blocks = document->blockCount();
QTextBlock block = document->begin();
for (int i = 0; i < num_blocks; ++i) {
endl(*stream << block.text());
emit progress(i * 100 / num_blocks);
block = block.next();
}
emit progress(100);
}
emit persisted();
}
void ScribusQApp::showUsage()
{
QFile f;
f.open(stderr, QIODevice::WriteOnly);
QTextStream ts(&f);
ts << tr("Usage: scribus [options] [files]") ; endl(ts); endl(ts);
ts << tr("Options:") ; endl(ts);
printArgLine(ts, ARG_FONTINFO_SHORT, ARG_FONTINFO, tr("Show information on the console when fonts are being loaded") );
printArgLine(ts, ARG_HELP_SHORT, ARG_HELP, tr("Print help (this message) and exit") );
printArgLine(ts, ARG_LANG_SHORT, ARG_LANG, tr("Uses xx as shortcut for a language, eg `en' or `de'") );
printArgLine(ts, ARG_AVAILLANG_SHORT, ARG_AVAILLANG, tr("List the currently installed interface languages") );
printArgLine(ts, ARG_NOSPLASH_SHORT, ARG_NOSPLASH, tr("Do not show the splashscreen on startup") );
printArgLine(ts, ARG_NEVERSPLASH_SHORT, ARG_NEVERSPLASH, tr("Stop showing the splashscreen on startup. Writes an empty file called .neversplash in ~/.scribus") );
printArgLine(ts, ARG_PREFS_SHORT, qPrintable(QString("%1 <%2>").arg(ARG_PREFS).arg(tr("filename"))), tr("Use filename as path for user given preferences") );
printArgLine(ts, ARG_PROFILEINFO_SHORT, ARG_PROFILEINFO, tr("Show location of ICC profile information on console while starting") );
printArgLine(ts, ARG_UPGRADECHECK_SHORT, ARG_UPGRADECHECK, tr("Download a file from the Scribus website and show the latest available version") );
printArgLine(ts, ARG_VERSION_SHORT, ARG_VERSION, tr("Output version information and exit") );
printArgLine(ts, ARG_PYTHONSCRIPT_SHORT, qPrintable(QString("%1 <%2>").arg(ARG_PYTHONSCRIPT).arg(tr("filename"))), tr("Run filename in Python scripter") );
printArgLine(ts, ARG_SCRIPTARG_SHORT, qPrintable(QString("%1 <%2> [%3]").arg(ARG_SCRIPTARG).arg(tr("argument")).arg(tr("value"))), tr("Argument passed on to python script, with an optional value, no effect without -py") );
printArgLine(ts, ARG_NOGUI_SHORT, ARG_NOGUI, tr("Do not start GUI") );
ts << (QString(" %1").arg(CMD_OPTIONS_END,-39)) << tr("Explicit end of command line options"); endl(ts);
#if defined(_WIN32) && !defined(_CONSOLE)
printArgLine(ts, ARG_CONSOLE_SHORT, ARG_CONSOLE, tr("Display a console window") );
#endif
#if WITH_TESTS
printArgLine(ts, ARG_TESTS_SHORT, ARG_TESTS, tr("Run unit tests and exit") );
#endif
/* Delete me?
std::cout << "-file|-- name Open file 'name'" ; endl(ts);
std::cout << "name Open file 'name', the file name must not begin with '-'" ; endl(ts);
std::cout << "QT specific options as -display ..." ; endl(ts);
*/
endl(ts);
f.close();
}
void
ZDriver::emitValue( const Producer::ValueSetting &val,
std::ostream &out )
{
if ( ! val.first.empty() )
{
emitLineInfo( getSourceFile(), val.second, out );
out << val.first << endl();
myCurLineNum += std::count_if( val.first.begin(), val.first.end(),
std::bind2nd( std::equal_to<char>(), '\n' ) );
emitLineInfo( myFileName, getOutLine(), out );
}
}
void BufferedFTPrinter::printOut(const size_t rows) {
size_t row = rows;
size_t column = 0;
for (int lineType: _lines) {
if (lineType < 0 && column > 0)
FTPrinter::append(endl());
switch(lineType) {
case lineHeader: FTPrinter::printHeader(); break;
case lineFooter: FTPrinter::printFooter(); break;
case lineTableName: FTPrinter::printTableName(); break;
default: //a data line
if (row == 0) break;
for (size_t i = 0; i < static_cast<size_t>(lineType); ++i) {
FTPrinter::append( _columnFormats[column]).append(_columns[column]);
++column;
}
FTPrinter::append(endl());
--row;
}
}
}
// -----------------------------------------------------------------
ValueReader(const core::ReaderInputPort& port)
{
assert( port.connectedOutput()->data() );
_container = dynamic_cast<ValueContainerInterface<TValueType>* >(
port.data()
);
if(!_container)
{
Debug::error() << "ValueReader<"
<< types::str<ValueType>()
<< ">::Constructor : "
<< "enable to determine the Container type"
<< endl();
}
}
int main()
{
std::cout << "Test\n"; // There is no operator<< in global namespace, but ADL
// examines std namespace because the left argument is in
// std and finds std::operator<<(std::ostream&, const char*)
operator<<(std::cout, "Test\n"); // same, using function call notation
// however,
std::cout << std::endl; // Error: 'endl' is not declared in this namespace.
// This is not a function call to endl(), so ADL does not apply
endl(std::cout); // OK: this is a function call: ADL examines std namespace
// because the argument of endl is in std, and finds std::endl
(endl)(std::cout); // Error: 'endl' is not declared in this namespace.
// The sub-expression (endl) is not a function call expression
}
//-------------------------------------------------------------------------------------------------
// удаление лога
void log::destroy()
{
if (0 != instance)
{
#ifdef _DEBUG
endl( get() );
// get() << "</strong>\n";
get().logFile << "</font>\n"
<< "</body></html>\n";
if ( get().logFile.is_open() )
{
get().logFile.close();
}
#endif
delete instance;
}
}
/** Export one playlist at a time. */
void PlaylistDialog::exportSelectedPlaylist()
{
QString exportedPlaylistLocation;
SettingsPrivate *settings = SettingsPrivate::instance();
if (settings->value("locationForExportedPlaylist").isNull()) {
exportedPlaylistLocation = QStandardPaths::writableLocation(QStandardPaths::MusicLocation);
} else {
exportedPlaylistLocation = settings->value("locationForExportedPlaylist").toString();
}
auto indexes = savedPlaylists->selectionModel()->selectedIndexes();
if (indexes.isEmpty()) {
return;
}
QStandardItem *item = _savedPlaylistModel->itemFromIndex(indexes.first());
uint playlistId = item->data(PlaylistID).toUInt();
auto db = SqlDatabase::instance();
PlaylistDAO dao = db->selectPlaylist(playlistId);
QString title = this->convertNameToValidFileName(dao.title());
// Open a file dialog and ask the user to choose a location
QString newName = QFileDialog::getSaveFileName(this, tr("Export playlist"), exportedPlaylistLocation + QDir::separator() + title, tr("Playlist (*.m3u8)"));
if (QFile::exists(newName)) {
QFile removePreviousOne(newName);
if (!removePreviousOne.remove()) {
qDebug() << Q_FUNC_INFO << "Cannot remove" << newName;
}
}
if (newName.isEmpty()) {
return;
} else {
QFile f(newName);
if (f.open(QIODevice::ReadWrite | QIODevice::Text)) {
QTextStream stream(&f);
QList<TrackDAO> tracks = db->selectPlaylistTracks(playlistId);
for (TrackDAO t : tracks) {
stream << t.uri();
endl(stream);
}
}
f.close();
}
}
