/* Returns number of items remove, expired, or evicted.
* Callable from worker threads or the LRU maintainer thread */
static int lru_pull_tail(const int orig_id, const int cur_lru,
const uint64_t total_bytes, uint8_t flags) {
item *it = NULL;
int id = orig_id;
int removed = 0;
if (id == 0)
return 0;
int tries = 5;
item *search;
item *next_it;
void *hold_lock = NULL;
unsigned int move_to_lru = 0;
uint64_t limit = 0;
id |= cur_lru;
pthread_mutex_lock(&lru_locks[id]);
search = tails[id];
/* We walk up *only* for locked items, and if bottom is expired. */
for (; tries > 0 && search != NULL; tries--, search=next_it) {
/* we might relink search mid-loop, so search->prev isn't reliable */
next_it = search->prev;
if (search->nbytes == 0 && search->nkey == 0 && search->it_flags == 1) {
/* We are a crawler, ignore it. */
if (flags & LRU_PULL_CRAWL_BLOCKS) {
pthread_mutex_unlock(&lru_locks[id]);
return 0;
}
tries++;
continue;
}
uint32_t hv = hash(ITEM_key(search), search->nkey);
/* Attempt to hash item lock the "search" item. If locked, no
* other callers can incr the refcount. Also skip ourselves. */
if ((hold_lock = item_trylock(hv)) == NULL)
continue;
/* Now see if the item is refcount locked */
if (refcount_incr(&search->refcount) != 2) {
/* Note pathological case with ref'ed items in tail.
* Can still unlink the item, but it won't be reusable yet */
itemstats[id].lrutail_reflocked++;
/* In case of refcount leaks, enable for quick workaround. */
/* WARNING: This can cause terrible corruption */
if (settings.tail_repair_time &&
search->time + settings.tail_repair_time < current_time) {
itemstats[id].tailrepairs++;
search->refcount = 1;
/* This will call item_remove -> item_free since refcnt is 1 */
do_item_unlink_nolock(search, hv);
item_trylock_unlock(hold_lock);
continue;
}
}
/* Expired or flushed */
if ((search->exptime != 0 && search->exptime < current_time)
|| item_is_flushed(search)) {
itemstats[id].reclaimed++;
if ((search->it_flags & ITEM_FETCHED) == 0) {
itemstats[id].expired_unfetched++;
}
/* refcnt 2 -> 1 */
do_item_unlink_nolock(search, hv);
/* refcnt 1 -> 0 -> item_free */
do_item_remove(search);
item_trylock_unlock(hold_lock);
removed++;
/* If all we're finding are expired, can keep going */
continue;
}
/* If we're HOT_LRU or WARM_LRU and over size limit, send to COLD_LRU.
* If we're COLD_LRU, send to WARM_LRU unless we need to evict
*/
switch (cur_lru) {
case HOT_LRU:
limit = total_bytes * settings.hot_lru_pct / 100;
case WARM_LRU:
if (limit == 0)
limit = total_bytes * settings.warm_lru_pct / 100;
if (sizes_bytes[id] > limit) {
itemstats[id].moves_to_cold++;
move_to_lru = COLD_LRU;
do_item_unlink_q(search);
it = search;
removed++;
break;
} else if ((search->it_flags & ITEM_ACTIVE) != 0) {
/* Only allow ACTIVE relinking if we're not too large. */
itemstats[id].moves_within_lru++;
search->it_flags &= ~ITEM_ACTIVE;
do_item_update_nolock(search);
do_item_remove(search);
item_trylock_unlock(hold_lock);
} else {
/* Don't want to move to COLD, not active, bail out */
it = search;
}
break;
case COLD_LRU:
it = search; /* No matter what, we're stopping */
if (flags & LRU_PULL_EVICT) {
if (settings.evict_to_free == 0) {
/* Don't think we need a counter for this. It'll OOM. */
break;
}
itemstats[id].evicted++;
itemstats[id].evicted_time = current_time - search->time;
if (search->exptime != 0)
itemstats[id].evicted_nonzero++;
if ((search->it_flags & ITEM_FETCHED) == 0) {
itemstats[id].evicted_unfetched++;
}
LOGGER_LOG(NULL, LOG_EVICTIONS, LOGGER_EVICTION, search);
do_item_unlink_nolock(search, hv);
removed++;
if (settings.slab_automove == 2) {
slabs_reassign(-1, orig_id);
}
} else if ((search->it_flags & ITEM_ACTIVE) != 0
&& settings.lru_maintainer_thread) {
itemstats[id].moves_to_warm++;
search->it_flags &= ~ITEM_ACTIVE;
move_to_lru = WARM_LRU;
do_item_unlink_q(search);
removed++;
}
break;
}
if (it != NULL)
break;
}
pthread_mutex_unlock(&lru_locks[id]);
if (it != NULL) {
if (move_to_lru) {
it->slabs_clsid = ITEM_clsid(it);
it->slabs_clsid |= move_to_lru;
item_link_q(it);
}
do_item_remove(it);
item_trylock_unlock(hold_lock);
}
return removed;
}
/** wrapper around assoc_find which does the lazy expiration logic */
item *do_item_get(const char *key, const size_t nkey, const uint32_t hv, conn *c) {
item *it = assoc_find(key, nkey, hv);
if (it != NULL) {
refcount_incr(&it->refcount);
/* Optimization for slab reassignment. prevents popular items from
* jamming in busy wait. Can only do this here to satisfy lock order
* of item_lock, slabs_lock. */
/* This was made unsafe by removal of the cache_lock:
* slab_rebalance_signal and slab_rebal.* are modified in a separate
* thread under slabs_lock. If slab_rebalance_signal = 1, slab_start =
* NULL (0), but slab_end is still equal to some value, this would end
* up unlinking every item fetched.
* This is either an acceptable loss, or if slab_rebalance_signal is
* true, slab_start/slab_end should be put behind the slabs_lock.
* Which would cause a huge potential slowdown.
* Could also use a specific lock for slab_rebal.* and
* slab_rebalance_signal (shorter lock?)
*/
/*if (slab_rebalance_signal &&
((void *)it >= slab_rebal.slab_start && (void *)it < slab_rebal.slab_end)) {
do_item_unlink(it, hv);
do_item_remove(it);
it = NULL;
}*/
}
int was_found = 0;
if (settings.verbose > 2) {
int ii;
if (it == NULL) {
fprintf(stderr, "> NOT FOUND ");
} else {
fprintf(stderr, "> FOUND KEY ");
}
for (ii = 0; ii < nkey; ++ii) {
fprintf(stderr, "%c", key[ii]);
}
}
if (it != NULL) {
was_found = 1;
if (item_is_flushed(it)) {
do_item_unlink(it, hv);
do_item_remove(it);
it = NULL;
pthread_mutex_lock(&c->thread->stats.mutex);
c->thread->stats.get_flushed++;
pthread_mutex_unlock(&c->thread->stats.mutex);
if (settings.verbose > 2) {
fprintf(stderr, " -nuked by flush");
}
was_found = 2;
} else if (it->exptime != 0 && it->exptime <= current_time) {
do_item_unlink(it, hv);
do_item_remove(it);
it = NULL;
pthread_mutex_lock(&c->thread->stats.mutex);
c->thread->stats.get_expired++;
pthread_mutex_unlock(&c->thread->stats.mutex);
if (settings.verbose > 2) {
fprintf(stderr, " -nuked by expire");
}
was_found = 3;
} else {
it->it_flags |= ITEM_FETCHED|ITEM_ACTIVE;
DEBUG_REFCNT(it, '+');
}
}
if (settings.verbose > 2)
fprintf(stderr, "\n");
/* For now this is in addition to the above verbose logging. */
LOGGER_LOG(c->thread->l, LOG_FETCHERS, LOGGER_ITEM_GET, NULL, was_found, key, nkey);
return it;
}
static void storage_compact_readback(void *storage, logger *l,
bool drop_unread, char *readback_buf,
uint32_t page_id, uint64_t page_version, uint64_t read_size) {
uint64_t offset = 0;
unsigned int rescues = 0;
unsigned int lost = 0;
unsigned int skipped = 0;
while (offset < read_size) {
item *hdr_it = NULL;
item_hdr *hdr = NULL;
item *it = (item *)(readback_buf+offset);
unsigned int ntotal;
// probably zeroed out junk at the end of the wbuf
if (it->nkey == 0) {
break;
}
ntotal = ITEM_ntotal(it);
uint32_t hv = (uint32_t)it->time;
item_lock(hv);
// We don't have a conn and don't need to do most of do_item_get
hdr_it = assoc_find(ITEM_key(it), it->nkey, hv);
if (hdr_it != NULL) {
bool do_write = false;
refcount_incr(hdr_it);
// Check validity but don't bother removing it.
if ((hdr_it->it_flags & ITEM_HDR) && !item_is_flushed(hdr_it) &&
(hdr_it->exptime == 0 || hdr_it->exptime > current_time)) {
hdr = (item_hdr *)ITEM_data(hdr_it);
if (hdr->page_id == page_id && hdr->page_version == page_version) {
// Item header is still completely valid.
extstore_delete(storage, page_id, page_version, 1, ntotal);
// drop inactive items.
if (drop_unread && GET_LRU(hdr_it->slabs_clsid) == COLD_LRU) {
do_write = false;
skipped++;
} else {
do_write = true;
}
}
}
if (do_write) {
bool do_update = false;
int tries;
obj_io io;
io.len = ntotal;
io.mode = OBJ_IO_WRITE;
for (tries = 10; tries > 0; tries--) {
if (extstore_write_request(storage, PAGE_BUCKET_COMPACT, PAGE_BUCKET_COMPACT, &io) == 0) {
memcpy(io.buf, it, io.len);
extstore_write(storage, &io);
do_update = true;
break;
} else {
usleep(1000);
}
}
if (do_update) {
if (it->refcount == 2) {
hdr->page_version = io.page_version;
hdr->page_id = io.page_id;
hdr->offset = io.offset;
rescues++;
} else {
lost++;
// TODO: re-alloc and replace header.
}
} else {
lost++;
}
}
do_item_remove(hdr_it);
}
item_unlock(hv);
offset += ntotal;
if (read_size - offset < sizeof(struct _stritem))
break;
}
STATS_LOCK();
stats.extstore_compact_lost += lost;
stats.extstore_compact_rescues += rescues;
stats.extstore_compact_skipped += skipped;
STATS_UNLOCK();
LOGGER_LOG(l, LOG_SYSEVENTS, LOGGER_COMPACT_READ_END,
NULL, page_id, offset, rescues, lost, skipped);
}
/* refcount == 0 is safe since nobody can incr while item_lock is held.
* refcount != 0 is impossible since flags/etc can be modified in other
* threads. instead, note we found a busy one and bail. logic in do_item_get
* will prevent busy items from continuing to be busy
* NOTE: This is checking it_flags outside of an item lock. I believe this
* works since it_flags is 8 bits, and we're only ever comparing a single bit
* regardless. ITEM_SLABBED bit will always be correct since we're holding the
* lock which modifies that bit. ITEM_LINKED won't exist if we're between an
* item having ITEM_SLABBED removed, and the key hasn't been added to the item
* yet. The memory barrier from the slabs lock should order the key write and the
* flags to the item?
* If ITEM_LINKED did exist and was just removed, but we still see it, that's
* still safe since it will have a valid key, which we then lock, and then
* recheck everything.
* This may not be safe on all platforms; If not, slabs_alloc() will need to
* seed the item key while holding slabs_lock.
*/
static int slab_rebalance_move(void) {
slabclass_t *s_cls;
int x;
int was_busy = 0;
int refcount = 0;
uint32_t hv;
void *hold_lock;
enum move_status status = MOVE_PASS;
pthread_mutex_lock(&slabs_lock);
s_cls = &slabclass[slab_rebal.s_clsid];
for (x = 0; x < slab_bulk_check; x++) {
hv = 0;
hold_lock = NULL;
item *it = slab_rebal.slab_pos;
status = MOVE_PASS;
/* ITEM_FETCHED when ITEM_SLABBED is overloaded to mean we've cleared
* the chunk for move. Only these two flags should exist.
*/
if (it->it_flags != (ITEM_SLABBED|ITEM_FETCHED)) {
/* ITEM_SLABBED can only be added/removed under the slabs_lock */
if (it->it_flags & ITEM_SLABBED) {
/* remove from slab freelist */
if (s_cls->slots == it) {
s_cls->slots = it->next;
}
if (it->next) it->next->prev = it->prev;
if (it->prev) it->prev->next = it->next;
s_cls->sl_curr--;
status = MOVE_FROM_SLAB;
} else if ((it->it_flags & ITEM_LINKED) != 0) {
/* If it doesn't have ITEM_SLABBED, the item could be in any
* state on its way to being freed or written to. If no
* ITEM_SLABBED, but it's had ITEM_LINKED, it must be active
* and have the key written to it already.
*/
hv = hash(ITEM_key(it), it->nkey);
if ((hold_lock = item_trylock(hv)) == NULL) {
status = MOVE_LOCKED;
} else {
refcount = refcount_incr(&it->refcount);
if (refcount == 2) { /* item is linked but not busy */
/* Double check ITEM_LINKED flag here, since we're
* past a memory barrier from the mutex. */
if ((it->it_flags & ITEM_LINKED) != 0) {
status = MOVE_FROM_LRU;
} else {
/* refcount == 1 + !ITEM_LINKED means the item is being
* uploaded to, or was just unlinked but hasn't been freed
* yet. Let it bleed off on its own and try again later */
status = MOVE_BUSY;
}
} else {
if (settings.verbose > 2) {
fprintf(stderr, "Slab reassign hit a busy item: refcount: %d (%d -> %d)\n",
it->refcount, slab_rebal.s_clsid, slab_rebal.d_clsid);
}
status = MOVE_BUSY;
}
/* Item lock must be held while modifying refcount */
if (status == MOVE_BUSY) {
refcount_decr(&it->refcount);
item_trylock_unlock(hold_lock);
}
}
} else {
/* See above comment. No ITEM_SLABBED or ITEM_LINKED. Mark
* busy and wait for item to complete its upload. */
status = MOVE_BUSY;
}
}
int save_item = 0;
item *new_it = NULL;
size_t ntotal = 0;
switch (status) {
case MOVE_FROM_LRU:
/* Lock order is LRU locks -> slabs_lock. unlink uses LRU lock.
* We only need to hold the slabs_lock while initially looking
* at an item, and at this point we have an exclusive refcount
* (2) + the item is locked. Drop slabs lock, drop item to
* refcount 1 (just our own, then fall through and wipe it
*/
/* Check if expired or flushed */
ntotal = ITEM_ntotal(it);
/* REQUIRES slabs_lock: CHECK FOR cls->sl_curr > 0 */
if ((it->exptime != 0 && it->exptime < current_time)
|| item_is_flushed(it)) {
/* TODO: maybe we only want to save if item is in HOT or
* WARM LRU?
*/
save_item = 0;
} else if ((new_it = slab_rebalance_alloc(ntotal, slab_rebal.s_clsid)) == NULL) {
save_item = 0;
slab_rebal.evictions_nomem++;
} else {
save_item = 1;
}
pthread_mutex_unlock(&slabs_lock);
if (save_item) {
/* if free memory, memcpy. clear prev/next/h_bucket */
memcpy(new_it, it, ntotal);
new_it->prev = 0;
new_it->next = 0;
new_it->h_next = 0;
/* These are definitely required. else fails assert */
new_it->it_flags &= ~ITEM_LINKED;
new_it->refcount = 0;
do_item_replace(it, new_it, hv);
slab_rebal.rescues++;
} else {
do_item_unlink(it, hv);
}
item_trylock_unlock(hold_lock);
pthread_mutex_lock(&slabs_lock);
/* Always remove the ntotal, as we added it in during
* do_slabs_alloc() when copying the item.
*/
s_cls->requested -= ntotal;
case MOVE_FROM_SLAB:
it->refcount = 0;
it->it_flags = ITEM_SLABBED|ITEM_FETCHED;
#ifdef DEBUG_SLAB_MOVER
memcpy(ITEM_key(it), "deadbeef", 8);
#endif
break;
case MOVE_BUSY:
case MOVE_LOCKED:
slab_rebal.busy_items++;
was_busy++;
break;
case MOVE_PASS:
break;
}
slab_rebal.slab_pos = (char *)slab_rebal.slab_pos + s_cls->size;
if (slab_rebal.slab_pos >= slab_rebal.slab_end)
break;
}
if (slab_rebal.slab_pos >= slab_rebal.slab_end) {
/* Some items were busy, start again from the top */
if (slab_rebal.busy_items) {
slab_rebal.slab_pos = slab_rebal.slab_start;
STATS_LOCK();
stats.slab_reassign_busy_items += slab_rebal.busy_items;
STATS_UNLOCK();
slab_rebal.busy_items = 0;
} else {
slab_rebal.done++;
}
}
pthread_mutex_unlock(&slabs_lock);
return was_busy;
}
/* refcount == 0 is safe since nobody can incr while item_lock is held.
* refcount != 0 is impossible since flags/etc can be modified in other
* threads. instead, note we found a busy one and bail. logic in do_item_get
* will prevent busy items from continuing to be busy
* NOTE: This is checking it_flags outside of an item lock. I believe this
* works since it_flags is 8 bits, and we're only ever comparing a single bit
* regardless. ITEM_SLABBED bit will always be correct since we're holding the
* lock which modifies that bit. ITEM_LINKED won't exist if we're between an
* item having ITEM_SLABBED removed, and the key hasn't been added to the item
* yet. The memory barrier from the slabs lock should order the key write and the
* flags to the item?
* If ITEM_LINKED did exist and was just removed, but we still see it, that's
* still safe since it will have a valid key, which we then lock, and then
* recheck everything.
* This may not be safe on all platforms; If not, slabs_alloc() will need to
* seed the item key while holding slabs_lock.
*/
static int slab_rebalance_move(void) {
slabclass_t *s_cls;
int x;
int was_busy = 0;
int refcount = 0;
uint32_t hv;
void *hold_lock;
enum move_status status = MOVE_PASS;
pthread_mutex_lock(&slabs_lock);
s_cls = &slabclass[slab_rebal.s_clsid];
for (x = 0; x < slab_bulk_check; x++) {
hv = 0;
hold_lock = NULL;
item *it = slab_rebal.slab_pos;
item_chunk *ch = NULL;
status = MOVE_PASS;
if (it->it_flags & ITEM_CHUNK) {
/* This chunk is a chained part of a larger item. */
ch = (item_chunk *) it;
/* Instead, we use the head chunk to find the item and effectively
* lock the entire structure. If a chunk has ITEM_CHUNK flag, its
* head cannot be slabbed, so the normal routine is safe. */
it = ch->head;
assert(it->it_flags & ITEM_CHUNKED);
}
/* ITEM_FETCHED when ITEM_SLABBED is overloaded to mean we've cleared
* the chunk for move. Only these two flags should exist.
*/
if (it->it_flags != (ITEM_SLABBED|ITEM_FETCHED)) {
/* ITEM_SLABBED can only be added/removed under the slabs_lock */
if (it->it_flags & ITEM_SLABBED) {
assert(ch == NULL);
slab_rebalance_cut_free(s_cls, it);
status = MOVE_FROM_SLAB;
} else if ((it->it_flags & ITEM_LINKED) != 0) {
/* If it doesn't have ITEM_SLABBED, the item could be in any
* state on its way to being freed or written to. If no
* ITEM_SLABBED, but it's had ITEM_LINKED, it must be active
* and have the key written to it already.
*/
hv = hash(ITEM_key(it), it->nkey);
if ((hold_lock = item_trylock(hv)) == NULL) {
status = MOVE_LOCKED;
} else {
refcount = refcount_incr(it);
if (refcount == 2) { /* item is linked but not busy */
/* Double check ITEM_LINKED flag here, since we're
* past a memory barrier from the mutex. */
if ((it->it_flags & ITEM_LINKED) != 0) {
status = MOVE_FROM_LRU;
} else {
/* refcount == 1 + !ITEM_LINKED means the item is being
* uploaded to, or was just unlinked but hasn't been freed
* yet. Let it bleed off on its own and try again later */
status = MOVE_BUSY;
}
} else {
if (settings.verbose > 2) {
fprintf(stderr, "Slab reassign hit a busy item: refcount: %d (%d -> %d)\n",
it->refcount, slab_rebal.s_clsid, slab_rebal.d_clsid);
}
status = MOVE_BUSY;
}
/* Item lock must be held while modifying refcount */
if (status == MOVE_BUSY) {
refcount_decr(it);
item_trylock_unlock(hold_lock);
}
}
} else {
/* See above comment. No ITEM_SLABBED or ITEM_LINKED. Mark
* busy and wait for item to complete its upload. */
status = MOVE_BUSY;
}
}
int save_item = 0;
item *new_it = NULL;
size_t ntotal = 0;
switch (status) {
case MOVE_FROM_LRU:
/* Lock order is LRU locks -> slabs_lock. unlink uses LRU lock.
* We only need to hold the slabs_lock while initially looking
* at an item, and at this point we have an exclusive refcount
* (2) + the item is locked. Drop slabs lock, drop item to
* refcount 1 (just our own, then fall through and wipe it
*/
/* Check if expired or flushed */
ntotal = ITEM_ntotal(it);
/* REQUIRES slabs_lock: CHECK FOR cls->sl_curr > 0 */
if (ch == NULL && (it->it_flags & ITEM_CHUNKED)) {
/* Chunked should be identical to non-chunked, except we need
* to swap out ntotal for the head-chunk-total. */
ntotal = s_cls->size;
}
if ((it->exptime != 0 && it->exptime < current_time)
|| item_is_flushed(it)) {
/* Expired, don't save. */
save_item = 0;
} else if (ch == NULL &&
(new_it = slab_rebalance_alloc(ntotal, slab_rebal.s_clsid)) == NULL) {
/* Not a chunk of an item, and nomem. */
save_item = 0;
slab_rebal.evictions_nomem++;
} else if (ch != NULL &&
(new_it = slab_rebalance_alloc(s_cls->size, slab_rebal.s_clsid)) == NULL) {
/* Is a chunk of an item, and nomem. */
save_item = 0;
slab_rebal.evictions_nomem++;
} else {
/* Was whatever it was, and we have memory for it. */
save_item = 1;
}
pthread_mutex_unlock(&slabs_lock);
unsigned int requested_adjust = 0;
if (save_item) {
if (ch == NULL) {
assert((new_it->it_flags & ITEM_CHUNKED) == 0);
/* if free memory, memcpy. clear prev/next/h_bucket */
memcpy(new_it, it, ntotal);
new_it->prev = 0;
new_it->next = 0;
new_it->h_next = 0;
/* These are definitely required. else fails assert */
new_it->it_flags &= ~ITEM_LINKED;
new_it->refcount = 0;
do_item_replace(it, new_it, hv);
/* Need to walk the chunks and repoint head */
if (new_it->it_flags & ITEM_CHUNKED) {
item_chunk *fch = (item_chunk *) ITEM_data(new_it);
fch->next->prev = fch;
while (fch) {
fch->head = new_it;
fch = fch->next;
}
}
it->refcount = 0;
it->it_flags = ITEM_SLABBED|ITEM_FETCHED;
#ifdef DEBUG_SLAB_MOVER
memcpy(ITEM_key(it), "deadbeef", 8);
#endif
slab_rebal.rescues++;
requested_adjust = ntotal;
} else {
item_chunk *nch = (item_chunk *) new_it;
/* Chunks always have head chunk (the main it) */
ch->prev->next = nch;
if (ch->next)
ch->next->prev = nch;
memcpy(nch, ch, ch->used + sizeof(item_chunk));
ch->refcount = 0;
ch->it_flags = ITEM_SLABBED|ITEM_FETCHED;
slab_rebal.chunk_rescues++;
#ifdef DEBUG_SLAB_MOVER
memcpy(ITEM_key((item *)ch), "deadbeef", 8);
#endif
refcount_decr(it);
requested_adjust = s_cls->size;
}
} else {
/* restore ntotal in case we tried saving a head chunk. */
ntotal = ITEM_ntotal(it);
do_item_unlink(it, hv);
slabs_free(it, ntotal, slab_rebal.s_clsid);
/* Swing around again later to remove it from the freelist. */
slab_rebal.busy_items++;
was_busy++;
}
item_trylock_unlock(hold_lock);
pthread_mutex_lock(&slabs_lock);
/* Always remove the ntotal, as we added it in during
* do_slabs_alloc() when copying the item.
*/
s_cls->requested -= requested_adjust;
break;
case MOVE_FROM_SLAB:
it->refcount = 0;
it->it_flags = ITEM_SLABBED|ITEM_FETCHED;
#ifdef DEBUG_SLAB_MOVER
memcpy(ITEM_key(it), "deadbeef", 8);
#endif
break;
case MOVE_BUSY:
case MOVE_LOCKED:
slab_rebal.busy_items++;
was_busy++;
break;
case MOVE_PASS:
break;
}
slab_rebal.slab_pos = (char *)slab_rebal.slab_pos + s_cls->size;
if (slab_rebal.slab_pos >= slab_rebal.slab_end)
break;
}
if (slab_rebal.slab_pos >= slab_rebal.slab_end) {
/* Some items were busy, start again from the top */
if (slab_rebal.busy_items) {
slab_rebal.slab_pos = slab_rebal.slab_start;
STATS_LOCK();
stats.slab_reassign_busy_items += slab_rebal.busy_items;
STATS_UNLOCK();
slab_rebal.busy_items = 0;
} else {
slab_rebal.done++;
}
}
pthread_mutex_unlock(&slabs_lock);
return was_busy;
}
