/** * ixgbe_init_shared_code - Initialize the shared code * @hw: pointer to hardware structure * * This will assign function pointers and assign the MAC type and PHY code. * Does not touch the hardware. This function must be called prior to any * other function in the shared code. The ixgbe_hw structure should be * memset to 0 prior to calling this function. The following fields in * hw structure should be filled in prior to calling this function: * hw_addr, back, device_id, vendor_id, subsystem_device_id, * subsystem_vendor_id, and revision_id **/ s32 ixgbe_init_shared_code(struct ixgbe_hw *hw) { s32 status; #ifdef ENABLE_DNA if((hw->subsystem_vendor_id == 0x1374) /* Silicom subvendor id */ && (hw->subsystem_device_id == 0x0F00)) hw->silicom.has_hw_ts_card = 1; /* Silicom Hw Timestamping card found */ else hw->silicom.has_hw_ts_card = 0; #endif /* * Set the mac type */ ixgbe_set_mac_type(hw); switch (hw->mac.type) { case ixgbe_mac_82598EB: status = ixgbe_init_ops_82598(hw); break; case ixgbe_mac_82599EB: status = ixgbe_init_ops_82599(hw); break; case ixgbe_mac_X540: status = ixgbe_init_ops_X540(hw); break; default: status = IXGBE_ERR_DEVICE_NOT_SUPPORTED; break; } return status; }
/** * ixgbe_init_shared_code - Initialize the shared code * @hw: pointer to hardware structure * * This will assign function pointers and assign the MAC type and PHY code. * Does not touch the hardware. This function must be called prior to any * other function in the shared code. The ixgbe_hw structure should be * memset to 0 prior to calling this function. The following fields in * hw structure should be filled in prior to calling this function: * hw_addr, back, device_id, vendor_id, subsystem_device_id, * subsystem_vendor_id, and revision_id **/ s32 ixgbe_init_shared_code(struct ixgbe_hw *hw) { s32 status; /* * Set the mac type */ ixgbe_set_mac_type(hw); switch (hw->mac.type) { case ixgbe_mac_82598EB: status = ixgbe_init_ops_82598(hw); break; case ixgbe_mac_82599EB: status = ixgbe_init_ops_82599(hw); break; case ixgbe_mac_X540: status = ixgbe_init_ops_X540(hw); break; default: status = IXGBE_ERR_DEVICE_NOT_SUPPORTED; break; } return status; }
/** * ixgbe_init_shared_code - Initialize the shared code * @hw: pointer to hardware structure * * This will assign function pointers and assign the MAC type and PHY code. * Does not touch the hardware. This function must be called prior to any * other function in the shared code. The ixgbe_hw structure should be * memset to 0 prior to calling this function. The following fields in * hw structure should be filled in prior to calling this function: * hw_addr, back, device_id, vendor_id, subsystem_device_id, * subsystem_vendor_id, and revision_id **/ s32 ixgbe_init_shared_code(struct ixgbe_hw *hw) { s32 status; DEBUGFUNC("ixgbe_init_shared_code"); /* * Set the mac type */ ixgbe_set_mac_type(hw); switch (hw->mac.type) { case ixgbe_mac_82598EB: status = ixgbe_init_ops_82598(hw); break; case ixgbe_mac_82599EB: status = ixgbe_init_ops_82599(hw); break; case ixgbe_mac_X540: status = ixgbe_init_ops_X540(hw); break; case ixgbe_mac_X550: status = ixgbe_init_ops_X550(hw); break; case ixgbe_mac_X550EM_x: status = ixgbe_init_ops_X550EM(hw); break; case ixgbe_mac_82599_vf: case ixgbe_mac_X540_vf: case ixgbe_mac_X550_vf: case ixgbe_mac_X550EM_x_vf: status = ixgbe_init_ops_vf(hw); break; default: status = IXGBE_ERR_DEVICE_NOT_SUPPORTED; break; } hw->mac.max_link_up_time = IXGBE_LINK_UP_TIME; return status; }