/**
* ixgbe_init_shared_code - Initialize the shared code
* @hw: pointer to hardware structure
*
* This will assign function pointers and assign the MAC type and PHY code.
* Does not touch the hardware. This function must be called prior to any
* other function in the shared code. The ixgbe_hw structure should be
* memset to 0 prior to calling this function. The following fields in
* hw structure should be filled in prior to calling this function:
* hw_addr, back, device_id, vendor_id, subsystem_device_id,
* subsystem_vendor_id, and revision_id
**/
s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
{
s32 status;
#ifdef ENABLE_DNA
if((hw->subsystem_vendor_id == 0x1374) /* Silicom subvendor id */
&& (hw->subsystem_device_id == 0x0F00))
hw->silicom.has_hw_ts_card = 1; /* Silicom Hw Timestamping card found */
else
hw->silicom.has_hw_ts_card = 0;
#endif
/*
* Set the mac type
*/
ixgbe_set_mac_type(hw);
switch (hw->mac.type) {
case ixgbe_mac_82598EB:
status = ixgbe_init_ops_82598(hw);
break;
case ixgbe_mac_82599EB:
status = ixgbe_init_ops_82599(hw);
break;
case ixgbe_mac_X540:
status = ixgbe_init_ops_X540(hw);
break;
default:
status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
break;
}
return status;
}
/**
* ixgbe_init_shared_code - Initialize the shared code
* @hw: pointer to hardware structure
*
* This will assign function pointers and assign the MAC type and PHY code.
* Does not touch the hardware. This function must be called prior to any
* other function in the shared code. The ixgbe_hw structure should be
* memset to 0 prior to calling this function. The following fields in
* hw structure should be filled in prior to calling this function:
* hw_addr, back, device_id, vendor_id, subsystem_device_id,
* subsystem_vendor_id, and revision_id
**/
s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
{
s32 status;
/*
* Set the mac type
*/
ixgbe_set_mac_type(hw);
switch (hw->mac.type) {
case ixgbe_mac_82598EB:
status = ixgbe_init_ops_82598(hw);
break;
case ixgbe_mac_82599EB:
status = ixgbe_init_ops_82599(hw);
break;
case ixgbe_mac_X540:
status = ixgbe_init_ops_X540(hw);
break;
default:
status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
break;
}
return status;
}
/**
* ixgbe_init_shared_code - Initialize the shared code
* @hw: pointer to hardware structure
*
* This will assign function pointers and assign the MAC type and PHY code.
* Does not touch the hardware. This function must be called prior to any
* other function in the shared code. The ixgbe_hw structure should be
* memset to 0 prior to calling this function. The following fields in
* hw structure should be filled in prior to calling this function:
* hw_addr, back, device_id, vendor_id, subsystem_device_id,
* subsystem_vendor_id, and revision_id
**/
s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
{
s32 status;
DEBUGFUNC("ixgbe_init_shared_code");
/*
* Set the mac type
*/
ixgbe_set_mac_type(hw);
switch (hw->mac.type) {
case ixgbe_mac_82598EB:
status = ixgbe_init_ops_82598(hw);
break;
case ixgbe_mac_82599EB:
status = ixgbe_init_ops_82599(hw);
break;
case ixgbe_mac_X540:
status = ixgbe_init_ops_X540(hw);
break;
case ixgbe_mac_X550:
status = ixgbe_init_ops_X550(hw);
break;
case ixgbe_mac_X550EM_x:
status = ixgbe_init_ops_X550EM(hw);
break;
case ixgbe_mac_82599_vf:
case ixgbe_mac_X540_vf:
case ixgbe_mac_X550_vf:
case ixgbe_mac_X550EM_x_vf:
status = ixgbe_init_ops_vf(hw);
break;
default:
status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
break;
}
hw->mac.max_link_up_time = IXGBE_LINK_UP_TIME;
return status;
}
