pulsesequence()
{
/* DECLARE VARIABLES */

 char       autocal[MAXSTR],  /* auto-calibration flag */
            fsat[MAXSTR],
	    fscuba[MAXSTR],
            f1180[MAXSTR],    /* Flag to start t1 @ halfdwell             */
            f2180[MAXSTR],    /* Flag to start t2 @ halfdwell             */
            f3180[MAXSTR],    /* Flag to start t3 @ halfdwell             */
            fco180[MAXSTR],    /* Flag for checking sequence              */
            fca180[MAXSTR],    /* Flag for checking sequence              */
            spca180[MAXSTR],  /* string for the waveform Ca 180 */
            spco180[MAXSTR],  /* string for the waveform Co 180 */
            spchirp[MAXSTR],  /* string for the waveform reburp 180 */
            ddseq[MAXSTR],    /* 2H decoupling seqfile */
            shp_sl[MAXSTR],   /* string for seduce shape */
            sel_flg[MAXSTR];

 int         phase, phase2, phase3, ni2, ni3, icosel,
             t1_counter,   /* used for states tppi in t1           */ 
             t2_counter,   /* used for states tppi in t2           */ 
             t3_counter;   /* used for states tppi in t3           */ 

 double      tau1,         /*  t1 delay */
             tau2,         /*  t2 delay */
             tau3,         /*  t2 delay */
             taua,         /*  ~ 1/4JNH =  2.25 ms */
             taub,         /*  ~ 1/4JNH =  2.25 ms */
             zeta,        /* time for C'-N to refocuss set to 0.5*24.0 ms */
             bigTN,       /* nitrogen T period */
             pwc90,       /* PW90 for c nucleus @ d_c90         */
             pwc180on,    /* PW180 at @ d_c180         */
             pwchirp,     /* PW180 for ca nucleus @ d_creb         */
             pwc180off,     /* PW180 at d_c180 + pad              */
             tsatpwr,     /* low level 1H trans.power for presat  */
             d_c90,       /* power level for 13C pulses(pwc90 = sqrt(15)/4delta)
                             delta is the separation between Ca and Co  */
             d_c180,      /* power level for 180 13C pulses
				(pwc180on=sqrt(3)/2delta   */
	     d_chirp,
             sw1,          /* sweep width in f1                    */             
             sw2,          /* sweep width in f2                    */             
             sw3,          /* sweep width in f3                    */             
             pw_sl,        /* pw90 for H selective pulse on water ~ 2ms */
             phase_sl,     /* phase for pw_sl */
             tpwrsl,       /* power level for square pw_sl       */

	     pwDlvl,	   /* Power for D decoupling */
	     pwD,	   /* pw90 at pwDlvl  */

	     pwC, pwClvl,  /* C-13 calibration */
	     compC, 

             pwN,         /* PW90 for 15N pulse              */
             pwNlvl,       /* high dec2 pwr for 15N hard pulses    */

             gstab,       /* delay to compensate for gradient gt5 */

             gt1,
             gt2,
             gt3,
             gt4,
             gt5,
             gt6,
             gt7,
             gt8,
             gt9,
             gzlvl1,
             gzlvl2,
             gzlvl3,
             gzlvl4,
             gzlvl5,
             gzlvl6,
             gzlvl7, 
             gzlvl8, 
             gzlvl9; 

/* LOAD VARIABLES */


  getstr("autocal",autocal);
  getstr("fsat",fsat);
  getstr("fco180",fco180);
  getstr("fca180",fca180);
  getstr("f1180",f1180);
  getstr("f2180",f2180);
  getstr("f3180",f3180);
  getstr("fscuba",fscuba);
  getstr("ddseq",ddseq);
  getstr("shp_sl",shp_sl);

  getstr("sel_flg",sel_flg);

  taua   = getval("taua"); 
  taub   = getval("taub"); 
  zeta  = getval("zeta");
  bigTN = getval("bigTN");
  tpwr = getval("tpwr");
  tsatpwr = getval("tsatpwr");
  dpwr = getval("dpwr");
  pwN = getval("pwN");
  pwNlvl = getval("pwNlvl");
  pwD = getval("pwD");
  pwDlvl = getval("pwDlvl");
  phase = (int) ( getval("phase") + 0.5);
  phase2 = (int) ( getval("phase2") + 0.5);
  phase3 = (int) ( getval("phase3") + 0.5);
  sw1 = getval("sw1");
  sw2 = getval("sw2");
  sw3 = getval("sw3");
  ni2 = getval("ni2");
  ni3 = getval("ni3");
  pw_sl = getval("pw_sl");
  phase_sl = getval("phase_sl");
  tpwrsl = getval("tpwrsl");

  gstab = getval("gstab");

  gt1 = getval("gt1");
  if (getval("gt2") > 0) gt2=getval("gt2");
    else gt2=gt1*0.1;
  gt3 = getval("gt3");
  gt4 = getval("gt4");
  gt5 = getval("gt5");
  gt6 = getval("gt6");
  gt7 = getval("gt7");
  gt8 = getval("gt8");
  gt9 = getval("gt9");

  gzlvl1 = getval("gzlvl1");
  gzlvl2 = getval("gzlvl2");
  gzlvl3 = getval("gzlvl3");
  gzlvl4 = getval("gzlvl4");
  gzlvl5 = getval("gzlvl5");
  gzlvl6 = getval("gzlvl6");
  gzlvl7 = getval("gzlvl7");
  gzlvl8 = getval("gzlvl8");
  gzlvl9 = getval("gzlvl9");

  if(autocal[0]=='n')
  {     
    getstr("spca180",spca180);
    getstr("spco180",spco180);
    getstr("spchirp",spchirp);
    pwc90 = getval("pwc90");
    pwc180on = getval("pwc180on");
    pwc180off = getval("pwc180off");
    d_c90 = getval("d_c90");
    d_c180 = getval("d_c180");
    pwchirp = getval("pwchirp");
    d_chirp = getval("d_chirp");    
  }
  else
  {    
    strcpy(spca180,"Phard180ca");
    strcpy(spco180,"Phard180co");    
    strcpy(spchirp,"Pchirp180");    
    
    if (FIRST_FID)
    {
      pwC = getval("pwC");
      compC = getval("compC");
      pwClvl = getval("pwClvl");
      co90 = pbox("cal", CO90, CO180ps, dfrq, pwC*compC, pwClvl);          
      co180 = pbox("cal", CO180, CO180ps, dfrq, pwC*compC, pwClvl);          
      ca180 = pbox(spca180, CA180, CA180ps, dfrq, pwC*compC, pwClvl);  
      co180a = pbox(spco180, CO180a, CA180ps, dfrq, pwC*compC, pwClvl);                        
      chirp = pbox(spchirp, CHIRP, CHIRPps, dfrq, pwC*compC, pwClvl);
    }
    pwc90 = co90.pw;         d_c90 = co90.pwr;
    pwc180on = co180.pw;     d_c180 = co180.pwr;    
    pwc180off = ca180.pw;            
    pwchirp = chirp.pw;      d_chirp = chirp.pwr;    
  }   

/* LOAD PHASE TABLE */

  settable(t1,2,phi1);
  settable(t2,2,phi2);
  settable(t3,4,phi3);
  settable(t4,1,phi4);
  settable(t5,4,phi5);
  settable(t6,4,rec);

/* CHECK VALIDITY OF PARAMETER RANGES */


    if( bigTN - (ni3-1)*0.5/sw3 - WFG3_START_DELAY < 0.2e-6 )
    {
        text_error(" ni3 is too big\n");
        text_error(" please set ni3 smaller or equal to %d\n",
			(int) ((bigTN -WFG3_START_DELAY)*sw3*2.0) +1 );
        psg_abort(1);
    }


    if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' || dm[D] == 'y' ))
    {
        text_error("incorrect dec1 decoupler flags!  ");
        psg_abort(1);
    }

    if((dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y' || dm2[D] == 'y'))
    {
        text_error("incorrect dec2 decoupler flags! Should be 'nnnn' ");
        psg_abort(1);
    }


    if( tsatpwr > 6 )
    {
        text_error("TSATPWR too large !!!  ");
        psg_abort(1);
    }

    if( dpwr > 46 )
    {
        text_error("don't fry the probe, DPWR too large!  ");
        psg_abort(1);
    }

    if( dpwr2 > 46 )
    {
        text_error("don't fry the probe, DPWR2 too large!  ");
        psg_abort(1);
    }

    if( dpwr3 > 50 )
    {
        text_error("don't fry the probe, dpwr3 too large!  ");
        psg_abort(1);
    }

    if( d_c90 > 62 )
    {
        text_error("don't fry the probe, DHPWR too large!  ");
        psg_abort(1);
    }

    if( pw > 200.0e-6 )
    {
        text_error("dont fry the probe, pw too high ! ");
        psg_abort(1);
    } 
    if( pwN > 200.0e-6 )
    {
        text_error("dont fry the probe, pwN too high ! ");
        psg_abort(1);
    } 
    if( pwc90 > 200.0e-6 )
    {
        text_error("dont fry the probe, pwc90 too high ! ");
        psg_abort(1);
    } 
    if( pwc180off > 200.0e-6 )
    {
        text_error("dont fry the probe, pwc180 too high ! ");
        psg_abort(1);
    } 

    if( gt3 > 2.5e-3 ) 
    {
        text_error("gt3 is too long\n");
        psg_abort(1);
    }
    if( gt1 > 10.0e-3 || gt2 > 10.0e-3 || gt4 > 10.0e-3 || gt5 > 10.0e-3
        || gt6 > 10.0e-3 || gt7 > 10.0e-3 || gt8 > 10.0e-3
	|| gt9 > 10.0e-3)
    {
        text_error("gt values are too long. Must be < 10.0e-3 or gt11=50us\n");
        psg_abort(1);
    } 

    if((fca180[A] == 'y') && (ni2 > 1))
    {
        text_error("must set fca180='n' to allow Calfa evolution (ni2>1)\n");
        psg_abort(1);
    } 

    if((fco180[A] == 'y') && (ni > 1))
    {
        text_error("must set fco180='n' to allow CO evolution (ni>1)\n");
        psg_abort(1);
    } 


/*  Phase incrementation for hypercomplex 2D data */

    if (phase == 2) tsadd(t1,1,4);

    if (phase2 == 2) tsadd(t5,1,4);

    if (phase3 == 2) { tsadd(t4, 2, 4); icosel = 1; }
      else icosel = -1;

/*  Set up f1180  tau1 = t1               */
   
    tau1 = d2;
    if((f1180[A] == 'y') && (ni > 1)) {
      if (pwc180off > 2.0*pwN) 
        tau1 += (1.0/(2.0*sw1) - 4.0*pwc90/PI - pwc180off 
	      - WFG3_START_DELAY - WFG3_STOP_DELAY - 4.0e-6 - 2.0*POWER_DELAY - 4.0e-6);
      else 
        tau1 += (1.0/(2.0*sw1) - 4.0*pwc90/PI - 2.0*pwN 
              - WFG3_START_DELAY - WFG3_STOP_DELAY - 4.0e-6 - 2.0*POWER_DELAY - 4.0e-6);

        if(tau1 < 0.2e-6) {
         tau1 = 0.4e-6;
	 text_error("tau1 could be negative");
	}
    }
    else
    {

      if (pwc180off > 2.0*pwN)
        tau1 = tau1 - 4.0*pwc90/PI - pwc180off
              - WFG3_START_DELAY - WFG3_STOP_DELAY - 4.0e-6 - 2.0*POWER_DELAY - 4.0e-6;
      else
        tau1 = tau1 - 4.0*pwc90/PI - 2.0*pwN 
              - WFG3_START_DELAY - WFG3_STOP_DELAY - 4.0e-6 - 2.0*POWER_DELAY - 4.0e-6;
 
        if(tau1 < 0.2e-6) tau1 = 0.4e-6;
     }

        tau1 = tau1/2.0;

/*  Set up f2180  tau2 = t2               */

    tau2 = d3;
    if((f2180[A] == 'y') && (ni2 > 1)) {
	if (pwc180off > 2.0*pwN)
          tau2 += ( 1.0 / (2.0*sw2) - 4.0*pwc90/PI - 4.0e-6
		 - 2.0*POWER_DELAY
		 - WFG3_START_DELAY - pwc180off - WFG3_STOP_DELAY - 4.0e-6);
	else
          tau2 += ( 1.0 / (2.0*sw2) - 4.0*pwc90/PI - 4.0e-6
                 - 2.0*POWER_DELAY
                 - WFG3_START_DELAY - 2.0*pwN - WFG3_STOP_DELAY - 4.0e-6);
        if(tau2 < 0.2e-6) {
	  tau2 = 0.4e-6;
	  text_error("tau2 could be negative");
 	} 

    }
    else
    {
        if (pwc180off > 2.0*pwN)
          tau2 = tau2 - 4.0*pwc90/PI - 4.0e-6
                 - 2.0*POWER_DELAY
                 - WFG3_START_DELAY - pwc180off - WFG3_STOP_DELAY - 4.0e-6;
        else
          tau2 = tau2 - 4.0*pwc90/PI - 4.0e-6
                 - 2.0*POWER_DELAY
                 - WFG3_START_DELAY - 2.0*pwN - WFG3_STOP_DELAY - 4.0e-6;
        if(tau2 < 0.2e-6) tau2 = 0.4e-6;
    }

        tau2 = tau2/2.0;

/*  Set up f3180  tau3 = t3               */
 
    tau3 = d4;
    if ((f3180[A] == 'y') && (ni3 > 1)) {
        tau3 += ( 1.0 / (2.0*sw3) );
        if(tau3 < 0.2e-6) tau3 = 0.4e-6;
    }
        tau3 = tau3/2.0;

/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2 ;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) {
      tsadd(t1,2,4);     
      tsadd(t6,2,4);    
    }

   if( ix == 1) d3_init = d3 ;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) {
      tsadd(t5,2,4);
      tsadd(t6,2,4);
    }

   if( ix == 1) d4_init = d4 ;
   t3_counter = (int) ( (d4-d4_init)*sw3 + 0.5 );
   if(t3_counter % 2) {
      tsadd(t2,2,4);  
      tsadd(t6,2,4);    
    }

/* BEGIN ACTUAL PULSE SEQUENCE */

status(A);
   obsoffset(tof);
   decoffset(dof);		/* set Dec1 carrier at Co		      */
   obspower(tsatpwr);      /* Set transmitter power for 1H presaturation */
   decpower(d_chirp);      /* Set Dec1 power for hard 13C pulses         */
   dec2power(pwNlvl);      /* Set Dec2 power for 15N hard pulses         */

/* Presaturation Period */

   if (fsat[0] == 'y')
     {
      delay(2.0e-5);
      rgpulse(d1,zero,2.0e-6,2.0e-6); /* presaturation */
      obspower(tpwr);      /* Set transmitter power for hard 1H pulses */
      delay(2.0e-5);
      if (fscuba[0] == 'y')
        {
         delay(2.2e-2);
         rgpulse(pw,zero,2.0e-6,0.0);
         rgpulse(2*pw,one,2.0e-6,0.0);
         rgpulse(pw,zero,2.0e-6,0.0);
         delay(2.2e-2);
        }
     }
    else
     {
      delay(d1);
     }

   obspower(tpwr);           /* Set transmitter power for hard 1H pulses */
   txphase(zero);
   dec2phase(zero);
   delay(1.0e-5);

/* Begin Pulses */

status(B);

   rcvroff();
   lk_hold();
   delay(20.0e-6);

   initval(1.0,v2);
   obsstepsize(phase_sl);
   xmtrphase(v2);

   /* shaped pulse */
   obspower(tpwrsl);
   shaped_pulse(shp_sl,pw_sl,one,4.0e-6,0.0);
   xmtrphase(zero);
   obspower(tpwr);  txphase(zero);  
   delay(4.0e-6);
   /* shaped pulse */

   rgpulse(pw,zero,0.0,0.0);                    /* 90 deg 1H pulse */

   delay(0.2e-6);
   zgradpulse(gzlvl5,gt5);
   delay(2.0e-6);

   delay(taua - gt5 - 2.2e-6);   /* taua <= 1/4JNH */ 

   sim3pulse(2*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);

   txphase(three); dec2phase(zero); decphase(zero); 

   delay(0.2e-6);
   zgradpulse(gzlvl5,gt5);
   delay(200.0e-6);

   delay(taua - gt5 - 200.2e-6 - 2.0e-6); 

   if (sel_flg[A] == 'n') 
     {
      rgpulse(pw,three,2.0e-6,0.0);

      delay(0.2e-6);
      zgradpulse(gzlvl3,gt3);
      delay(200.0e-6);

      dec2rgpulse(pwN,zero,0.0,0.0);

      delay( zeta );
  
      dec2rgpulse(2.0*pwN,zero,0.0,0.0);
      decshaped_pulse(spchirp,pwchirp,zero,0.0,0.0);

      delay(zeta -WFG_START_DELAY -pwchirp -WFG_STOP_DELAY -2.0e-6);

     dec2rgpulse(pwN,zero,2.0e-6,0.0);

    }
   else 
    {
     rgpulse(pw,one,2.0e-6,0.0);

     initval(1.0,v3);
     dec2stepsize(45.0); 
     dcplr2phase(v3);

     delay(0.2e-6);
     zgradpulse(gzlvl3,gt3);
     delay(200.0e-6);

     dec2rgpulse(pwN,zero,0.0,0.0);
     dcplr2phase(zero);

     delay(1.34e-3 - SAPS_DELAY - 2.0*pw);

     rgpulse(pw,one,0.0,0.0);
     rgpulse(2.0*pw,zero,0.0,0.0);
     rgpulse(pw,one,0.0,0.0);

     delay( zeta - 1.34e-3 - 2.0*pw);
  
     dec2rgpulse(2.0*pwN,zero,0.0,0.0);
     decshaped_pulse(spchirp,pwchirp,zero,0.0,0.0);

     delay(zeta -WFG_START_DELAY -pwchirp -WFG_STOP_DELAY -2.0e-6);

     dec2rgpulse(pwN,zero,2.0e-6,0.0);
    }

   dec2phase(zero); decphase(t1);
   decpower(d_c90);

   delay(0.2e-6);
   zgradpulse(gzlvl8,gt8);
   delay(200.0e-6);

   decrgpulse(pwc90,t1,2.0e-6,0.0);
/* t1 period for Co evolution begins */
   if (fco180[A]=='n')  
     {
      decpower(d_c180);

      delay(tau1);
      sim3shaped_pulse("",spca180,"",0.0,pwc180off,2.0*pwN,zero,zero,zero,4.0e-6,0.0);

      decpower(d_c90);

       delay(tau1);
     }
   else /* for checking sequence */
     {
      decpower(d_c180);
      decrgpulse(pwc180on,zero,4.0e-6,0.0);
      decpower(d_c90);
     }
/* t1 period for Co evolution ends */
   decrgpulse(pwc90,zero,4.0e-6,0.0);

   decoffset(dof-(174-56)*dfrq);   /* change Dec1 carrier to Ca (55 ppm) */
   delay(0.2e-6);
   zgradpulse(gzlvl4,gt4);
   delay(150.0e-6);

   /* Turn on D decoupling using the third decoupler */
   dec3phase(one);
   dec3power(pwDlvl);
   dec3rgpulse(pwD,one,4.0e-6,0.0);
   dec3phase(zero);
   dec3power(dpwr3);
   dec3unblank();
   setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
   /* Turn on D decoupling */

   decrgpulse(pwc90,t5,2.0e-6,0.0);
/* t2 period  for Ca evolution begins */
  if (fca180[A]=='n')
    {
     decphase(zero); dec2phase(zero);
     decpower(d_c180); 
     delay(tau2);
     sim3shaped_pulse("",spco180,"",0.0,pwc180off,2.0*pwN,zero,zero,zero,4.0e-6,0.0);
     decpower(d_c90); 
     delay(tau2);
    }
   else /* for checking sequence */
    {
     decpower(d_c180);
     decrgpulse(pwc180on,zero,4.0e-6,0.0);
     decpower(d_c90);
    }
/* t2 period  for Ca evolution ends */
   decrgpulse(pwc90,zero,4.0e-6,0.0);
 
   /* Turn off D decoupling */
   setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
   dec3blank();
   dec3phase(three);
   dec3power(pwDlvl);
   dec3rgpulse(pwD,three,4.0e-6,0.0);
   /* Turn off D decoupling */

   decoffset(dof);   /* set carrier back to Co */
   decpower(d_chirp);

   delay(0.2e-6);
   zgradpulse(gzlvl9,gt9);
   delay(150.0e-6);

/* t3 period begins */
   dec2rgpulse(pwN,t2,2.0e-6,0.0);

   dec2phase(t3);

   delay(bigTN - tau3);

   dec2rgpulse(2.0*pwN,t3,0.0,0.0);
   decshaped_pulse(spchirp,pwchirp,zero,0.0,0.0);

   txphase(zero);
   dec2phase(t4);

   delay(0.2e-6);
   zgradpulse(gzlvl1,gt1);
   delay(500.0e-6);

   delay(bigTN - WFG_START_DELAY - pwchirp - WFG_STOP_DELAY
         -gt1 -500.2e-6 -2.0*GRADIENT_DELAY);

   delay(tau3);

   sim3pulse(pw,0.0e-6,pwN,zero,zero,t4,0.0,0.0);
/* t3 period ends */

   decpower(d_c90);
   decrgpulse(pwc90,zero,4.0e-6,0.0);
   decoffset(dof-(174-56)*dfrq);
   decrgpulse(pwc90,zero,20.0e-6,0.0);

   delay(0.2e-6);
   zgradpulse(gzlvl6,gt6);
   delay(2.0e-6);

   dec2phase(zero);
   delay(taub - POWER_DELAY - 4.0e-6 - pwc90 - 20.0e-6 - pwc90 - gt6 - 2.2e-6);

   sim3pulse(2*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);

   decoffset(dof);
   delay(0.2e-6);
   zgradpulse(gzlvl6,gt6);
   delay(200.0e-6);
   
   txphase(one);
   dec2phase(one);

   delay(taub - gt6 - 200.2e-6);

   sim3pulse(pw,0.0e-6,pwN,one,zero,one,0.0,0.0);

   delay(0.2e-6);
   zgradpulse(gzlvl7,gt7);
   delay(2.0e-6);
 
   txphase(zero);
   dec2phase(zero);

   delay(taub - gt7 - 2.2e-6);

   sim3pulse(2*pw,0.0e-6,2*pwN,zero,zero,zero,0.0,0.0);

   delay(0.2e-6);
   zgradpulse(gzlvl7,gt7);
   delay(200.0e-6);

   delay(taub - gt7 - 200.2e-6);

   sim3pulse(pw,0.0e-6,pwN,zero,zero,zero,0.0,0.0);

   delay(gt2 +gstab -0.5*(pwN -pw) -2.0*pw/PI);

   rgpulse(2*pw,zero,0.0,0.0);

   delay(2.0e-6);
   zgradpulse(icosel*gzlvl2,gt2);
   decpower(dpwr);
   dec2power(dpwr2);
   delay(gstab -2.0e-6 -2.0*GRADIENT_DELAY -2.0*POWER_DELAY);

   lk_sample();
/* BEGIN ACQUISITION */
status(C);
   setreceiver(t6);

}
Exemple #2
0
void pulsesequence()
{



/* DECLARE AND LOAD VARIABLES */

char        f1180[MAXSTR],   		      /* Flag to start t1 @ halfdwell */
            f2180[MAXSTR],    		      /* Flag to start t2 @ halfdwell */
            mag_flg[MAXSTR],      /* magic-angle coherence transfer gradients */
 	    TROSY[MAXSTR];			    /* To check for TROSY flag */
 
int         icosel,          			  /* used to get n and p type */
            t1_counter,  		        /* used for states tppi in t1 */
            t2_counter,  	 	        /* used for states tppi in t2 */
	    ni2 = getval("ni2");

double      p_d,
	    rfd,
	    ncyc,
	    COmix = getval("COmix"),
	    p_trim,
	    rftrim,
	    tau1,         				         /*  t1 delay */
            tau2,        				         /*  t2 delay */
            timeTN = getval("timeTN"),     /* constant time for 15N evolution */
	    kappa = 5.4e-3,
	    lambda = 2.4e-3,
            
	pwClvl = getval("pwClvl"), 	        /* coarse power for C13 pulse */
        pwC = getval("pwC"),          /* C13 90 degree pulse length at pwClvl */
	rf0,            	  /* maximum fine power when using pwC pulses */

/* the following pulse lengths for SLP pulses are automatically calculated    */
/* by the macro "proteincal".  SLP pulse shapes, "offC3" etc are called       */
/* directly from your shapelib.                    			      */
   pwC3 = getval("pwC3"),  /*180 degree pulse at Ca(56ppm) null at CO(174ppm) */
   pwC3a = getval("pwC3a"),    /* pwC3a=pwC3, but not set to zero when pwC3=0 */
   phshift3,             /* phase shift induced on CO by pwC3 ("offC3") pulse */
   pwZ,					   /* the largest of pwC3 and 2.0*pwN */
   pwZ1,	       /* the largest of pwC3a and 2.0*pwN for 1D experiments */
   pwC6 = getval("pwC6"),     /* 90 degree selective sinc pulse on CO(174ppm) */
   pwC8 = getval("pwC8"),    /* 180 degree selective sinc pulse on CO(174ppm) */
   rf3,	                           /* fine power for the pwC3 ("offC3") pulse */
   rf6,	                           /* fine power for the pwC6 ("offC6") pulse */
   rf8,	                           /* fine power for the pwC8 ("offC8") pulse */

   compH = getval("compH"),       /* adjustment for C13 amplifier compression */
   compC = getval("compC"),       /* adjustment for C13 amplifier compression */

   	pwHs = getval("pwHs"),	        /* H1 90 degree pulse length at tpwrs */
   	tpwrsf = getval("tpwrsf"),    /* fine power adjustment for flipback   */
   	tpwrs,	  	              /* power for the pwHs ("H2Osinc") pulse */

   	pwHd,	    		        /* H1 90 degree pulse length at tpwrd */
   	tpwrd,	  	                   /*  rf for WALTZ decoupling */

        waltzB1 = getval("waltzB1"),  /* waltz16 field strength (in Hz)     */
	pwNlvl = getval("pwNlvl"),	              /* power for N15 pulses */
        pwN = getval("pwN"),          /* N15 90 degree pulse length at pwNlvl */

	sw1 = getval("sw1"),
	sw2 = getval("sw2"),

	gt1 = getval("gt1"),  		       /* coherence pathway gradients */
        gzcal  = getval("gzcal"),            /* g/cm to DAC conversion factor */
	gzlvl1 = getval("gzlvl1"),
	gzlvl2 = getval("gzlvl2"),

	gt0 = getval("gt0"),				   /* other gradients */
	gt3 = getval("gt3"),
	gt4 = getval("gt4"),
	gt5 = getval("gt5"),
	gstab = getval("gstab"),
	gzlvl0 = getval("gzlvl0"),
	gzlvl3 = getval("gzlvl3"),
	gzlvl4 = getval("gzlvl4"),
	gzlvl5 = getval("gzlvl5"),
	gzlvl6 = getval("gzlvl6");

    getstr("f1180",f1180);
    getstr("f2180",f2180);
    getstr("mag_flg",mag_flg);
    getstr("TROSY",TROSY);



/*   LOAD PHASE TABLE    */

	settable(t3,2,phi3);
	settable(t4,1,phx);
	settable(t5,4,phi5);

        settable(t8,1,phx);
	settable(t9,8,phi9);
	settable(t10,1,phx);
	settable(t11,1,phy);
	settable(t12,4,rec);




/*   INITIALIZE VARIABLES   */

    if( dpwrf < 4095 )
	{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
	  psg_abort(1); }

    /* maximum fine power for pwC pulses */
	rf0 = 4095.0;

    /* 180 degree pulse on Ca, null at CO 118ppm away */
        rf3 = (compC*4095.0*pwC*2.0)/pwC3a;
	rf3 = (int) (rf3 + 0.5);

    /* the pwC3 pulse at the middle of t1  */
	if ((ni2 > 0.0) && (ni == 1.0)) ni = 0.0;
        if (pwC3a > 2.0*pwN) pwZ = pwC3a; else pwZ = 2.0*pwN;
        if ((pwC3==0.0) && (pwC3a>2.0*pwN)) pwZ1=pwC3a-2.0*pwN; else pwZ1=0.0;
	if ( ni > 1 )     pwC3 = pwC3a;
	if ( pwC3 > 0 )   phshift3 = 48.0;
	else              phshift3 = 0.0;

    /* 90 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf6 = (compC*4095.0*pwC*1.69)/pwC6;	/* needs 1.69 times more     */
	rf6 = (int) (rf6 + 0.5);		/* power than a square pulse */

    /* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf8 = (compC*4095.0*pwC*2.0*1.65)/pwC8;	/* needs 1.65 times more     */
	rf8 = (int) (rf8 + 0.5);		/* power than a square pulse */
	
    /* selective H20 one-lobe sinc pulse */
    tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /* needs 1.69 times more */
    tpwrs = (int) (tpwrs);                       /* power than a square pulse */

    /* power level and pulse time for WALTZ 1H decoupling */
	pwHd = 1/(4.0 * waltzB1) ;
	tpwrd = tpwr - 20.0*log10(pwHd/(compH*pw));
	tpwrd = (int) (tpwrd + 0.5);
 
   /* dipsi-3 decoupling on COCO */
        p_trim = 1/(4*5000*(sfrq/600.0));  /* 5 kHz trim pulse at 600MHz as per Bax */
        p_d = (5.0)/(9.0*4.0*2800.0*(sfrq/600.0)); /* 2.8 kHz DIPSI-3 at 600MHz as per Bax*/
        rftrim = (compC*4095.0*pwC)/p_trim;
        rftrim = (int)(rftrim+0.5);
        rfd = (compC*4095.0*pwC*5.0)/(p_d*9.0);
        rfd = (int) (rfd + 0.5);
        ncyc = ((COmix - 0.002)/51.8/4/p_d);
        ncyc = (int) (ncyc + 0.5);
        initval(ncyc,v9);


/* CHECK VALIDITY OF PARAMETER RANGES */

    if ( 0.5*ni2*1/(sw2) > timeTN - WFG3_START_DELAY)
       { printf(" ni2 is too big. Make ni2 equal to %d or less.\n", 
  	 ((int)((timeTN - WFG3_START_DELAY)*2.0*sw2))); psg_abort(1);}

    if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
       { printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}

    if ( dm2[A] == 'y' || dm2[B] == 'y' )
       { printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}

    if ( dpwr2 > 50 )
       { printf("dpwr2 too large! recheck value  "); psg_abort(1);}

    if ( pw > 50.0e-6 )
       { printf(" pw too long ! recheck value "); psg_abort(1);} 
  
    if ( (pwN > 100.0e-6) && (ni>1 || ni2>1))
       { printf(" pwN too long! recheck value "); psg_abort(1);} 
 
    if ( TROSY[A] == 'y')
      { printf(" TROSY option is not implemented"); psg_abort(1);}
      


/* PHASES AND INCREMENTED TIMES */

/*  Phase incrementation for hypercomplex 2D data, States-Haberkorn element */

    if (phase1 == 2)   tsadd(t3,1,4);  
    if (phase2 == 2)  
    {tsadd(t10,2,4); icosel = +1;}
    else 			       
    icosel = -1;    


/*  Set up f1180  */
   
    tau1 = d2;
    if((f1180[A] == 'y') && (ni > 1.0)) 
	{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }


/*  Set up f2180  */

    tau2 = d3;
    if((f2180[A] == 'y') && (ni2 > 1.0)) 
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2/2.0;


/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t12,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t8,2,4); tsadd(t12,2,4); }



/* BEGIN PULSE SEQUENCE */

status(A);
   	delay(d1);
	rcvroff();
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rf0);
	obsoffset(tof);
	txphase(zero);
   	delay(1.0e-5);

	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(gzlvl0, 0.5e-3);
	delay(1.0e-4);
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	delay(5.0e-4);

   	rgpulse(pw,zero,0.0,0.0);                      /* 1H pulse excitation */

   	dec2phase(zero);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

   	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

   	txphase(one);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

 	rgpulse(pw, one, 0.0, 0.0);
    txphase(zero);
    
    if (tpwrsf<4095.0) {obspower(tpwrs+6.0); obspwrf(tpwrsf);}
     else obspower(tpwrs);
    shaped_pulse("H2Osinc", pwHs, zero, 5.0e-4, 0.0);
    obspower(tpwrd); obspwrf(4095.0);
    zgradpulse(gzlvl3, gt3);
    delay(2.0e-4);
    dec2rgpulse(pwN, zero, 0.0, 0.0);

    txphase(one);
    delay(kappa - pwHd - 2.0e-6 - PRG_START_DELAY);

    rgpulse(pwHd,one,0.0,0.0);
    txphase(zero);
    delay(2.0e-6);
    obsprgon("waltz16", pwHd, 90.0);	          /* PRG_START_DELAY */
    xmtron();
    decphase(zero);
    dec2phase(zero);
    decpwrf(rf8);
    delay(timeTN - kappa - WFG3_START_DELAY);
   
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero, 
								     0.0, 0.0);
	decphase(t3);
	decpwrf(rf6);
	delay(timeTN);

	dec2rgpulse(pwN, zero, 0.0, 0.0);

    xmtroff();
    obsprgoff();
    rgpulse(pwHd,three,2.0e-6,0.0);
	zgradpulse(gzlvl3, gt3);
 	delay(2.0e-4);
 /***************************************************************/
 /* The sequence is different from here with respect to ghn_co **/
 /***************************************************************/

    rgpulse(pwHd,one,2.0e-6,0.0);	/* H1 decoupler is turned on */
    txphase(zero);
    delay(2.0e-6);
    obsprgon("waltz16", pwHd, 90.0);	          
    xmtron();
    decshaped_pulse("offC6", pwC6, t3, 0.0, 0.0);
    decphase(zero);


	/* Refocus CO, evolve CO, spinlock CO and defocus CO  */


	delay(timeTN - tau1/2 - 0.6*pwC6 - WFG3_START_DELAY);
	decpwrf(rf8);
	sim3shaped_pulse("", "offC8","",0.0,pwC8, 2.0*pwN, zero,zero,zero,0.0,0.0);
	decpwrf(rf3);
	delay(timeTN - WFG3_STOP_DELAY - WFG_START_DELAY - pwC3a/2);
	decshaped_pulse("offC3",pwC3a,zero,0.0,0.0);
	if (tau1 > 0)
	delay(tau1/2 - WFG_STOP_DELAY - pwC3a/2 - 2.0e-6);
	else
	  delay(tau1/2);
	  
/*******DO SPINLOCK ********/

	decpwrf(rftrim);		
	decrgpulse(0.002,zero,2.0e-6,0.0);
	decpwrf(rfd);
	starthardloop(v9);
		decrgpulse(6.4*p_d,zero,0.0,0.0);
		decrgpulse(8.2*p_d,two,0.0,0.0);
		decrgpulse(5.8*p_d,zero,0.0,0.0);
		decrgpulse(5.7*p_d,two,0.0,0.0);
		decrgpulse(0.6*p_d,zero,0.0,0.0);
		decrgpulse(4.9*p_d,two,0.0,0.0);
		decrgpulse(7.5*p_d,zero,0.0,0.0);
		decrgpulse(5.3*p_d,two,0.0,0.0);
		decrgpulse(7.4*p_d,zero,0.0,0.0);
		
		decrgpulse(6.4*p_d,two,0.0,0.0);
		decrgpulse(8.2*p_d,zero,0.0,0.0);
		decrgpulse(5.8*p_d,two,0.0,0.0);
		decrgpulse(5.7*p_d,zero,0.0,0.0);
		decrgpulse(0.6*p_d,two,0.0,0.0);
		decrgpulse(4.9*p_d,zero,0.0,0.0);
		decrgpulse(7.5*p_d,two,0.0,0.0);
		decrgpulse(5.3*p_d,zero,0.0,0.0);
		decrgpulse(7.4*p_d,two,0.0,0.0);
		
		decrgpulse(6.4*p_d,two,0.0,0.0);
		decrgpulse(8.2*p_d,zero,0.0,0.0);
		decrgpulse(5.8*p_d,two,0.0,0.0);
		decrgpulse(5.7*p_d,zero,0.0,0.0);
		decrgpulse(0.6*p_d,two,0.0,0.0);
		decrgpulse(4.9*p_d,zero,0.0,0.0);
		decrgpulse(7.5*p_d,two,0.0,0.0);
		decrgpulse(5.3*p_d,zero,0.0,0.0);
		decrgpulse(7.4*p_d,two,0.0,0.0);
		
		decrgpulse(6.4*p_d,zero,0.0,0.0);
		decrgpulse(8.2*p_d,two,0.0,0.0);
		decrgpulse(5.8*p_d,zero,0.0,0.0);
		decrgpulse(5.7*p_d,two,0.0,0.0);
		decrgpulse(0.6*p_d,zero,0.0,0.0);
		decrgpulse(4.9*p_d,two,0.0,0.0);
		decrgpulse(7.5*p_d,zero,0.0,0.0);
		decrgpulse(5.3*p_d,two,0.0,0.0);
		decrgpulse(7.4*p_d,zero,0.0,0.0);
		
	endhardloop();
	decpwrf(4095.0);
	
/*   End of spinlock */

	delay(timeTN - WFG3_START_DELAY);
	decpwrf(rf8);
	sim3shaped_pulse("","offC8","",0.0,pwC8,2*pwN,zero,zero,zero,0.0,0.0);
	decpwrf(rf6);
	delay(timeTN - WFG3_STOP_DELAY);
	
 /***************************************************************/
 /*      The sequence is same as ghn_co from this point  ********/
 /***************************************************************/
 
	decshaped_pulse("offC6", pwC6, t5, 0.0, 0.0);


/*  xxxxxxxxxxxxxxxxxx    OPTIONS FOR N15 EVOLUTION    xxxxxxxxxxxxxxxxxxxxx  */

	dec2phase(t8);
	zgradpulse(gzlvl4, gt4);
	txphase(one);
	dcplrphase(zero);
 	delay(2.0e-4);
	dec2rgpulse(pwN, t8, 0.0, 0.0);

	decphase(zero);
	dec2phase(t9);
	decpwrf(rf8);
	delay(timeTN - WFG3_START_DELAY - tau2);
							 /* WFG3_START_DELAY  */
	sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, t9, 0.0, 0.0);
	dec2phase(t10);
	decpwrf(rf3);


    if (tau2 > kappa)
	{
          delay(timeTN - pwC3a - WFG_START_DELAY);     	   /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
          delay(kappa - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else if (tau2 > (kappa - pwC3a - WFG_START_DELAY))
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);                                     /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(kappa -pwC3a -WFG_START_DELAY -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
          delay(kappa - tau2 - pwC3a - WFG_START_DELAY);   /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
	  obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
    	  delay(kappa-tau2-pwC3a-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                    /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(tau2);
	}
/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
	sim3pulse(pw, 0.0, pwN, t4, zero, t10, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl5, gt5);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	txphase(one);
	dec2phase(t11);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(pw, 0.0, pwN, one, zero, t11, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl6, gt5);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	dec2phase(t10);
	zgradpulse(gzlvl6, gt5);
	delay(lambda - 0.65*pwN - gt5);

	rgpulse(pw, zero, 0.0, 0.0); 

	delay((gt1/10.0) + 1.0e-4 +gstab - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);

	rgpulse(2.0*pw, zero, 0.0,0.0);
	dec2power(dpwr2);				       /* POWER_DELAY */
        if (mag_flg[A] == 'y')    magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);
        else   zgradpulse(icosel*gzlvl2, gt1/10.0);            /* 2.0*GRADIENT_DELAY */
        delay(gstab);
        rcvron();
statusdelay(C,1.0e-4);

	setreceiver(t12);
}		 
Exemple #3
0
pulsesequence()
{



/* DECLARE AND LOAD VARIABLES */

char        f1180[MAXSTR],   		      /* Flag to start t1 @ halfdwell */
            f2180[MAXSTR],    		      /* Flag to start t2 @ halfdwell */
            mag_flg[MAXSTR],      /* magic-angle coherence transfer gradients */
 	    SCT[MAXSTR],    /* Semi-constant time flag for N-15 evolution */
	    CT_c[MAXSTR],            /* Constant time flag for C-13 evolution */
 	    TROSY[MAXSTR];			    /* do TROSY on N15 and H1 */
 
int         icosel,          			  /* used to get n and p type */
            t1_counter,  		        /* used for states tppi in t1 */
            t2_counter,  	 	        /* used for states tppi in t2 */
            PRexp,                          /* projection-reconstruction flag */
	    ni2 = getval("ni2");

double      tau1,         				         /*  t1 delay */
            tau2,        				         /*  t2 delay */
	    tauC = getval("tauC"), 	      /* delay for CO to Ca evolution */
            timeTN = getval("timeTN"),     /* constant time for 15N evolution */
	    timeTC = getval("timeTC"),     /* constant time for 13C evolution */
	    t2a=0.0, t2b=0.0, halfT2=0.0, CTdelay=0.0,
	    kappa = 5.4e-3,
	    lambda = 2.4e-3,
            
	pwClvl = getval("pwClvl"), 	        /* coarse power for C13 pulse */
        pwC = getval("pwC"),          /* C13 90 degree pulse length at pwClvl */
	rf0,            	  /* maximum fine power when using pwC pulses */

/* 90 degree pulse at Ca (56ppm), first off-resonance null at CO (174ppm)     */
        pwC1,		              /* 90 degree pulse length on C13 at rf1 */
        rf1,		       /* fine power for 4.7 kHz rf for 600MHz magnet */

/* 180 degree pulse at Ca (56ppm), first off-resonance null at CO(174ppm)     */
        pwC2,		                    /* 180 degree pulse length at rf2 */
        rf2,		      /* fine power for 10.5 kHz rf for 600MHz magnet */

/* the following pulse lengths for SLP pulses are automatically calculated    */
/* by the macro "proteincal".  SLP pulse shapes, "offC6" etc are called     */
/* directly from your shapelib.                    			      */
   pwC3 = getval("pwC3"),  /*180 degree pulse at Ca(56ppm) null at CO(174ppm) */
   pwC6 = getval("pwC6"),     /* 90 degree selective sinc pulse on CO(174ppm) */
   pwC8 = getval("pwC8"),    /* 180 degree selective sinc pulse on CO(174ppm) */
   pwC9 = getval("pwC9"),    /* 180 degree selective sinc pulse on CO(174ppm) */
   phshift9,             /* phase shift induced on Ca by pwC9 ("offC9") pulse */
   pwZ,					   /* the largest of pwC9 and 2.0*pwN */
   pwZ1,                 /* the larger of pwC8 and 2.0*pwN for 1D experiments */
   rf3,	                           /* fine power for the pwC3 ("offC3") pulse */
   rf6,	                           /* fine power for the pwC6 ("offC6") pulse */
   rf8,	                           /* fine power for the pwC8 ("offC8") pulse */
   rf9,	                           /* fine power for the pwC9 ("offC9") pulse */

   dofCO,			       /* channel 2 offset for most CO pulses */
	
   compH = getval("compH"),       /* adjustment for C13 amplifier compression */
   compC = getval("compC"),       /* adjustment for C13 amplifier compression */

   	pwHs = getval("pwHs"),	        /* H1 90 degree pulse length at tpwrs */
   	tpwrsf = getval("tpwrsf"),    /* fine power adjustment for flipback   */
   	tpwrs,	  	              /* power for the pwHs ("H2Osinc") pulse */

        csa, sna,
        pra = M_PI*getval("pra")/180.0,
   	pwHd,	    		        /* H1 90 degree pulse length at tpwrd */
   	tpwrd,	  	                           /* rf for WALTZ decoupling */

        waltzB1 = getval("waltzB1"),  /* waltz16 field strength (in Hz)     */
	pwNlvl = getval("pwNlvl"),	              /* power for N15 pulses */
        pwN = getval("pwN"),          /* N15 90 degree pulse length at pwNlvl */

	sw1 = getval("sw1"),
	sw2 = getval("sw2"),

	gt1 = getval("gt1"),  		       /* coherence pathway gradients */
        gzcal  = getval("gzcal"),            /* g/cm to DAC conversion factor */
	gzlvl1 = getval("gzlvl1"),
	gzlvl2 = getval("gzlvl2"),

	gt0 = getval("gt0"),				   /* other gradients */
	gt3 = getval("gt3"),
	gt4 = getval("gt4"),
	gt5 = getval("gt5"),
	gt7 = getval("gt7"),
	gt9 = getval("gt9"),
	gt10 = getval("gt10"),
	gstab = getval("gstab"),
	gzlvl0 = getval("gzlvl0"),
	gzlvl3 = getval("gzlvl3"),
	gzlvl4 = getval("gzlvl4"),
	gzlvl5 = getval("gzlvl5"),
	gzlvl6 = getval("gzlvl6"),
	gzlvl7 = getval("gzlvl7"),
	gzlvl8 = getval("gzlvl8"),
	gzlvl9 = getval("gzlvl9"),
	gzlvl10 = getval("gzlvl10");

    getstr("f1180",f1180);
    getstr("f2180",f2180);
    getstr("mag_flg",mag_flg);
    getstr("SCT",SCT);
    getstr("CT_c",CT_c);
    getstr("TROSY",TROSY);

/*   LOAD PHASE TABLE    */
     
	settable(t3,2,phi3);
	settable(t4,1,phx);
	settable(t5,4,phi5);
   if (TROSY[A]=='y')
       {settable(t8,1,phy);
	settable(t9,1,phx);
 	settable(t10,1,phy);
	settable(t11,1,phx);
	settable(t12,4,recT);}
    else
       {settable(t8,1,phx);
	settable(t9,8,phi9);
	settable(t10,1,phx);
	settable(t11,1,phy);
	settable(t12,4,rec);}




/*   INITIALIZE VARIABLES   */

    if( dpwrf < 4095 )
	{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
	  psg_abort(1); }

    /* offset during CO pulses, except for t1 evolution period */	
	dofCO = dof + 118.0*dfrq;

    /* maximum fine power for pwC pulses */
	rf0 = 4095.0;

     /* 90 degree pulse on Ca, null at CO 118ppm away */
       pwC1 = sqrt(15.0)/(4.0*118.0*dfrq);
        rf1 = 4095.0*(compC*pwC)/pwC1;
        rf1 = (int) (rf1 + 0.5);

    /* 180 degree pulse on Ca, null at CO 118ppm away */
        pwC2 = sqrt(3.0)/(2.0*118.0*dfrq);
	rf2 = (compC*4095.0*pwC*2.0)/pwC2;
        rf2 = (int) (rf2 + 0.5);
        if( rf2 > 4095.0 )
       { printf("increase pwClvl so that C13 90 < 24us*(600/sfrq)"); psg_abort(1);}

    /* 180 degree pulse on Ca, null at CO 118ppm away */
	rf3 = (compC*4095.0*pwC*2.0)/pwC3;
	rf3 = (int) (rf3 + 0.5);

    /* 90 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf6 = (compC*4095.0*pwC*1.69)/pwC6;	/* needs 1.69 times more     */
	rf6 = (int) (rf6 + 0.5);		/* power than a square pulse */

    /* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf8 = (compC*4095.0*pwC*2.0*1.65)/pwC8;	/* needs 1.65 times more     */
	rf8 = (int) (rf8 + 0.5);		/* power than a square pulse */

    /* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf9 = (compC*4095.0*pwC*2.0*1.65)/pwC8;	/* needs 1.65 times more     */
	rf9 = (int) (rf9 + 0.5);		/* power than a square pulse */

    /* the pwC9 pulse at the middle of t1  */
        if ((ni2 > 0.0) && (ni == 1.0)) ni = 0.0;
        if (pwC8 > 2.0*pwN) pwZ = pwC8; else pwZ = 2.0*pwN;
        if ((pwC9==0.0) && (pwC8>2.0*pwN)) pwZ1=pwC8-2.0*pwN; else pwZ1=0.0;
	if ( ni > 1 )     pwC9 = pwC8;
	if ( pwC9 > 0 )   phshift9 = 140.0;
	else              phshift9 = 0.0;
	
    /* selective H20 one-lobe sinc pulse */
    tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /* needs 1.69 times more */
    tpwrs = (int) (tpwrs);                       /* power than a square pulse */

    /* power level and pulse time for WALTZ 1H decoupling */
	pwHd = 1/(4.0 * waltzB1) ;                              /* 7.5 kHz rf   */
	tpwrd = tpwr - 20.0*log10(pwHd/(compH*pw));
	tpwrd = (int) (tpwrd + 0.5);
 
/* set up Projection-Reconstruction experiment */
 
    tau1 = d2; tau2 = d3; 
    PRexp=0; csa = 1.0; sna = 0.0;   
    if((pra > 0.0) && (pra < 90.0)) /* PR experiments */
    {
      PRexp = 1;
      csa = cos(pra); 
      sna = sin(pra);
      tau1 = d2*csa;  
      tau2 = d2*sna;
    }

/* CHECK VALIDITY OF PARAMETER RANGES */

    if(SCT[A] == 'n')
    {
      if (PRexp) 
      {
        if( 0.5*ni*sna/sw1 > timeTN - WFG3_START_DELAY)
          { printf(" ni is too big. Make ni equal to %d or less.\n",
          ((int)((timeTN - WFG3_START_DELAY)*2.0*sw1/sna)));         psg_abort(1);}
      }
      else 
      {
        if ( 0.5*ni2*1/(sw2) > timeTN - WFG3_START_DELAY)
         { printf(" ni2 is too big. Make ni2 equal to %d or less.\n", 
           ((int)((timeTN - WFG3_START_DELAY)*2.0*sw2)));              psg_abort(1);}
      }
    }

    if(CT_c[A] == 'y')
    {
      if ( 0.5*ni*csa/sw1 > timeTC)
       { printf(" ni is too big. Make ni less than %d or less.\n", 
         ((int)(timeTC*2.0*sw1/csa - 4e-6 - SAPS_DELAY)));           psg_abort(1);} 	 	                                  
    }

    if ( tauC < (gt7+1.0e-4+0.5*10.933*pwC))  gt7=(tauC-1.0e-4-0.5*10.933*pwC);

    if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
       { printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}

    if ( dm2[A] == 'y' || dm2[B] == 'y' )
       { printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}

    if ( dm3[A] == 'y' || dm3[C] == 'y' )
       { printf("incorrect dec3 decoupler flags! Should be 'nyn' or 'nnn' ");
							             psg_abort(1);}	
    if ( dpwr2 > 50 )
       { printf("dpwr2 too large! recheck value  ");		     psg_abort(1);}

    if ( pw > 20.0e-6 )
       { printf(" pw too long ! recheck value ");	             psg_abort(1);} 
  
    if ( pwN > 100.0e-6 )
       { printf(" pwN too long! recheck value ");	             psg_abort(1);} 
 
    if ( TROSY[A]=='y' && dm2[C] == 'y')
       { text_error("Choose either TROSY='n' or dm2='n' ! ");        psg_abort(1);}



/* PHASES AND INCREMENTED TIMES */

/*  Phase incrementation for hypercomplex 2D data, States-Haberkorn element */

    if (phase1 == 2)   tsadd(t3,1,4);  
    if (TROSY[A]=='y')
	 {  if (phase2 == 2)   				      icosel = +1;
            else 	    {tsadd(t4,2,4);  tsadd(t10,2,4);  icosel = -1;}
	 }
    else {  if (phase2 == 2)  {tsadd(t10,2,4); icosel = +1;}
            else 			       icosel = -1;    
	 }

/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t12,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t8,2,4); tsadd(t12,2,4); }

/* Set up CONSTANT/SEMI-CONSTANT time evolution in N15 */

    halfT2 = 0.0;  
    CTdelay = timeTN + pwC8 + WFG_START_DELAY - SAPS_DELAY;

    if(ni>1)                
    {
      if(f1180[A] == 'y')     /*  Set up f1180 */
        tau1 += 0.5*csa/sw1;  /* if not PRexp then csa = 1.0 */
      if(PRexp)
      {
        halfT2 = 0.5*(ni-1)/sw1;  /* ni2 is not defined */
        if(f1180[A] == 'y') 
        { tau2 += 0.5*sna/sw1; halfT2 += 0.25*sna/sw1; }
        t2b = (double) t1_counter*((halfT2 - CTdelay)/((double)(ni-1)));
      }
    }
    if (ni2>1)
    {
      halfT2 = 0.5*(ni2-1)/sw2;
      if(f2180[A] == 'y')        /*  Set up f2180  */
      { tau2 += 0.5/sw2; halfT2 += 0.25/sw2; }
      t2b = (double) t2_counter*((halfT2 - CTdelay)/((double)(ni2-1)));
    }
    tau1 = tau1/2.0;
    tau2 = tau2/2.0;
    if(tau1 < 0.2e-6) tau1 = 0.0; 
    if(tau2 < 0.2e-6) tau2 = 0.0; 

    if(t2b < 0.0) t2b = 0.0;
    t2a = CTdelay - tau2 + t2b;
    if(t2a < 0.2e-6)  t2a = 0.0;

/* uncomment these lines to check t2a and t2b 
    printf("%d: t2a = %.12f", t2_counter,t2a);
    printf(" ; t2b = %.12f\n", t2b);
*/


/* BEGIN PULSE SEQUENCE */

status(A);
   	delay(d1);
        if ( dm3[B] == 'y' )
          { lk_hold(); lk_sampling_off();}  /*freezes z0 correction, stops lock pulsing*/
 
	rcvroff();
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rf0);
	obsoffset(tof);
	decoffset(dofCO);
	txphase(zero);
   	delay(1.0e-5);

       if (TROSY[A] == 'n')
	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(-gzlvl0, 0.5e-3);
	delay(1.0e-4);
       if (TROSY[A] == 'n')
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(-0.7*gzlvl0, 0.5e-3);
	delay(5.0e-4);

  	rgpulse(pw, zero, 0.0, 0.0);                   /* 1H pulse excitation */

   	dec2phase(zero);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

   	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

   	txphase(one);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

 	rgpulse(pw, one, 0.0, 0.0);
    if (tpwrsf < 4095.0) 
     {obspwrf(tpwrsf);
        obspower(tpwrs+6.0);}                 /* increases tpwrs by 6dB, now need */
     else
        obspower(tpwrs);
                                          /* tpwrsf to be ~ 2048 for equivalence */

if (TROSY[A]=='y')
   {txphase(two);
    shaped_pulse("H2Osinc", pwHs, two, 5.0e-4, 0.0);
    obspower(tpwr); obspwrf(4095.0);
    zgradpulse(gzlvl3, gt3);
    delay(2.0e-4);
    dec2rgpulse(pwN, zero, 0.0, 0.0);

    delay(0.5*kappa - 2.0*pw);

    rgpulse(2.0*pw, two, 0.0, 0.0);

    obspower(tpwrd);	  				       /* POWER_DELAY */
    decphase(zero);
    dec2phase(zero);
    decpwrf(rf8);
    delay(timeTN -0.5*kappa - POWER_DELAY - WFG3_START_DELAY);
   }
else
   {txphase(zero);
    if (tpwrsf < 4095.0) 
     {obspwrf(tpwrsf); 
        obspower(tpwrs+6.0);}                 /* increases tpwrs by 6dB, now need */
     else
        obspower(tpwrs);
                                          /* tpwrsf to be ~ 2048 for equivalence */
    shaped_pulse("H2Osinc",pwHs,zero,5.0e-4,0.0);
    obspower(tpwrd); obspwrf(4095.0);
    zgradpulse(gzlvl3, gt3);
    delay(2.0e-4);
    dec2rgpulse(pwN, zero, 0.0, 0.0);

    txphase(one);
    delay(kappa - pwHd - 2.0e-6 - PRG_START_DELAY);

    rgpulse(pwHd,one,0.0,0.0);
    txphase(zero);
    delay(2.0e-6);
    obsprgon("waltz16", pwHd, 90.0);	          /* PRG_START_DELAY */
    xmtron();
    decphase(zero);
    dec2phase(zero);
    decpwrf(rf8);
    delay(timeTN - kappa - WFG3_START_DELAY);
   }
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero, 
								     0.0, 0.0);
	decphase(zero);
	decpwrf(rf6);
	delay(timeTN);

	dec2rgpulse(pwN, zero, 0.0, 0.0);
if (TROSY[A]=='n')
   {xmtroff();
    obsprgoff();
    rgpulse(pwHd,three,2.0e-6,0.0);}
	zgradpulse(-gzlvl3, gt3);
 	delay(2.0e-4);
	decshaped_pulse("offC6", pwC6, zero, 0.0, 0.0);

	zgradpulse(-gzlvl7, gt7);
	decpwrf(rf0);
	decphase(zero);
	delay(tauC - gt7 - 0.5*10.933*pwC);

	decrgpulse(pwC*158.0/90.0, zero, 0.0, 0.0);
	decrgpulse(pwC*171.2/90.0, two, 0.0, 0.0);
	decrgpulse(pwC*342.8/90.0, zero, 0.0, 0.0);      /* Shaka 6 composite */
	decrgpulse(pwC*145.5/90.0, two, 0.0, 0.0);
	decrgpulse(pwC*81.2/90.0, zero, 0.0, 0.0);
	decrgpulse(pwC*85.3/90.0, two, 0.0, 0.0);

	zgradpulse(-gzlvl7, gt7);
	decpwrf(rf6);
	decphase(one);
	txphase(one);
        delay(tauC - gt7 - 0.5*10.933*pwC - WFG_START_DELAY);
							   /* WFG_START_DELAY */
	decshaped_pulse("offC6", pwC6, one, 0.0, 0.0);
	decoffset(dof);
	zgradpulse(-gzlvl9, gt9);
	decpwrf(rf1);
	decphase(t3);
	delay(2.0e-4);
      if ( dm3[B] == 'y' )     /* begins optional 2H decoupling */
        {
          dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
          dec3unblank();
          dec3phase(zero);
          delay(2.0e-6);
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
        }
        rgpulse(pwHd,one,0.0,0.0);
	txphase(zero);
 	delay(2.0e-6);
	obsprgon("waltz16", pwHd, 90.0);
	xmtron();

	decrgpulse(pwC1, t3, 0.0, 0.0);
	decphase(zero);

/*   xxxxxxxxxxxxxxxxxxxxxx       13Ca EVOLUTION        xxxxxxxxxxxxxxxxxx    */

  if (ni==1.0)         /* special 1D check of pwC9 phase enabled when ni=1 */
  {
        decpwrf(rf9);
	delay(10.0e-6 + SAPS_DELAY + 0.5*pwZ1);
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC9", "", 0.0, pwC9, 2.0*pwN, zero, zero, zero,
							          2.0e-6, 0.0);
	initval(phshift9, v9);
	decstepsize(1.0);
	dcplrphase(v9);  					/* SAPS_DELAY */
	delay(10.0e-6 + WFG3_START_DELAY + 0.5*pwZ1);
  }
  else if(CT_c[A] == 'y')           /* xxxxxxx 13Ca Constant Time EVOLUTION xxxxxxxx */
  {
    decpwrf(rf9);
    if(tau1 - 2.0*pwC1/PI - WFG_START_DELAY -POWER_DELAY > 0.0) {
       delay(tau1 -2.0*pwC1/PI -POWER_DELAY -WFG_START_DELAY);
       sim3shaped_pulse("","offC9","",0.0,pwC8, 2.0*pwN, zero, zero, zero, 
								0.0, 0.0);
    }
    else
       sim3shaped_pulse("","offC9","",0.0,pwC8, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
    
    delay(timeTC- 2.0e-6 -WFG_STOP_DELAY-POWER_DELAY); 

    decpwrf(rf2);
    decrgpulse(pwC2, zero, 2.0e-6, 2.0e-6); 	             /* 13Ca 180 degree pulse */ 

    delay(timeTC-tau1- 4.0e-6 -SAPS_DELAY);
    
    phshift9 = 230.0;  /* = 320-90 - correction for -90 degree phase shift in F1 */
    initval(phshift9, v9);
    decstepsize(1.0);
    dcplrphase(v9);                                         /* SAPS_DELAY */
  }
  else                         /* xxxxxxx 13Ca Conventional EVOLUTION xxxxxxxxx */
  {
    if ((ni>1.0) && (tau1>0.0))          /* total 13C evolution equals d2 exactly */
    {         /* 2.0*pwC1/PI compensates for evolution at 64% rate during pwC1 */
       decpwrf(rf9);
       if(tau1 - 2.0*pwC1/PI - WFG3_START_DELAY - 0.5*pwZ > 0.0)
       {	   
	   delay(tau1 - 2.0*pwC1/PI - WFG3_START_DELAY - 0.5*pwZ);
							  
	   sim3shaped_pulse("", "offC9", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero,
								      0.0, 0.0);
	   initval(phshift9, v9);
	   decstepsize(1.0);
	   dcplrphase(v9);  				        /* SAPS_DELAY */
	   delay(tau1 - 2.0*pwC1/PI  - SAPS_DELAY - 0.5*pwZ - 2.0e-6);
       }
       else
       {
	 initval(180.0, v9);
	 decstepsize(1.0);
	 dcplrphase(v9);  				        /* SAPS_DELAY */
	 delay(2.0*tau1 - 4.0*pwC1/PI - SAPS_DELAY - 2.0e-6);
       }
    }
    else		       /* 13Ca evolution refocused for 1st increment  */
    {
	decpwrf(rf2);
	delay(10.0e-6);	
	decrgpulse(pwC2, zero, 2.0e-6, 0.0);
	delay(10.0e-6);	
    }
  }
        decphase(t5);
	decpwrf(rf1);
	decrgpulse(pwC1, t5, 2.0e-6, 0.0);


/*   xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx    */

	xmtroff();
	obsprgoff();
        rgpulse(pwHd,three,2.0e-6,0.0);
	decoffset(dofCO);
	decpwrf(rf6);
	decphase(one);
        if ( dm3[B] == 'y' )   /* turns off 2H decoupling  */
           {
           setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
           dec3rgpulse(1/dmf3,three,2.0e-6,2.0e-6);
           dec3blank();
           lk_autotrig();   /* resumes lock pulsing */
           }
	zgradpulse(gzlvl10, gt10);
 	delay(2.0e-4);
	decshaped_pulse("offC6", pwC6, one, 0.0, 0.0);

	zgradpulse(gzlvl8, gt7);
	decpwrf(rf0);
	decphase(zero);
	delay(tauC - gt7 - 0.5*10.933*pwC);

	decrgpulse(pwC*158.0/90.0, zero, 0.0, 0.0);
	decrgpulse(pwC*171.2/90.0, two, 0.0, 0.0);
	decrgpulse(pwC*342.8/90.0, zero, 0.0, 0.0);	/* Shaka 6 composite */
	decrgpulse(pwC*145.5/90.0, two, 0.0, 0.0);
	decrgpulse(pwC*81.2/90.0, zero, 0.0, 0.0);
	decrgpulse(pwC*85.3/90.0, two, 0.0, 0.0);

	zgradpulse(gzlvl8, gt7);
	decpwrf(rf6);
	decphase(zero);
	delay(tauC - gt7 - 0.5*10.933*pwC - WFG_START_DELAY);
							   /* WFG_START_DELAY */
	decshaped_pulse("offC6", pwC6, zero, 0.0, 0.0);

/*  xxxxxxxxxxxxxxxxxx    OPTIONS FOR N15 EVOLUTION    xxxxxxxxxxxxxxxxxxxxx  */

	zgradpulse(gzlvl4, gt4);
	txphase(one);
	decphase(zero);
	decpwrf(rf8);
	dcplrphase(zero);
	dec2phase(t8);
 	delay(2.0e-4);
 	
        if (TROSY[A]=='n')
	   {rgpulse(pwHd,one,0.0,0.0);
	    txphase(zero);
	    delay(2.0e-6);
	    obsprgon("waltz16", pwHd, 90.0);
	    xmtron();}
	    
	dec2rgpulse(pwN, t8, 0.0, 0.0); /* N15 EVOLUTION BEGINS HERE */
	dec2phase(t9);

        if(SCT[A] == 'y')
        {
	  delay(t2a);
          dec2rgpulse(2.0*pwN, t9, 0.0, 0.0);
	  delay(t2b);
          decshaped_pulse("offC8", pwC8, zero, 0.0, 0.0); /* WFG_START_DELAY  */
        }
        else
        {	
	  delay(timeTN - WFG3_START_DELAY - tau2);       /* WFG3_START_DELAY  */							 
	  sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, t9, 
								   0.0, 0.0);
        }
	dec2phase(t10);
        decpwrf(rf3);

if (TROSY[A]=='y')
{    if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.5e-4 + pwHs)
	{
	  txphase(three);
          delay(timeTN - pwC3 - WFG_START_DELAY);         /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.5e-4 - pwHs);
          if (mag_flg[A]=='y')  magradpulse(gzcal*gzlvl1, gt1);
          else  zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwrs);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
    if (tpwrsf < 4095.0) 
     {obspwrf(tpwrsf); 
        obspower(tpwrs+6.0);}                 /* increases tpwrs by 6dB, now need */
     else
        obspower(tpwrs);
                                          /* tpwrsf to be ~ 2048 for equivalence */
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
          obspower(tpwr); obspwrf(4095.0);
	  txphase(t4);
	  delay(0.5e-4 - POWER_DELAY);
	}

    else if (tau2 > pwHs + 0.5e-4)
	{
	  txphase(three);
          delay(timeTN-pwC3-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else  zgradpulse(gzlvl1, gt1);	   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwrs);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                     /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
          delay(tau2 - pwHs - 0.5e-4);
    if (tpwrsf < 4095.0) 
     {obspwrf(tpwrsf); 
        obspower(tpwrs+6.0);}                 /* increases tpwrs by 6dB, now need */
     else
        obspower(tpwrs);
                                          /* tpwrsf to be ~ 2048 for equivalence */
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
          obspower(tpwr); obspwrf(4095.0);
	  txphase(t4);
	  delay(0.5e-4 - POWER_DELAY);
	}
    else
	{
	  txphase(three);
          delay(timeTN - pwC3 - WFG_START_DELAY - gt1 - 2.0*GRADIENT_DELAY
							    - 1.5e-4 - pwHs);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else  zgradpulse(gzlvl1, gt1);	   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwrs);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                     /* WFG_START_DELAY */
    if (tpwrsf < 4095.0) 
     {obspwrf(tpwrsf); 
        obspower(tpwrs+6.0);}                 /* increases tpwrs by 6dB, now need */
     else
        obspower(tpwrs);
                                          /* tpwrsf to be ~ 2048 for equivalence */
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
          obspower(tpwr); obspwrf(4095.0);
	  txphase(t4);
	  delay(0.5e-4 - POWER_DELAY);
          decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
          delay(tau2);
	}
}
else
{
    if (tau2 > kappa)
	{
          delay(timeTN - pwC3 - WFG_START_DELAY);     	   /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
          delay(tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
          delay(kappa - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else if (tau2 > (kappa - pwC3 - WFG_START_DELAY))
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);                                     /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
          delay(kappa -pwC3 -WFG_START_DELAY -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
          delay(kappa - tau2 - pwC3 - WFG_START_DELAY);   /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
	  obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
    	  delay(kappa-tau2-pwC3-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                    /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3, zero, 0.0, 0.0);
          delay(tau2);
	}
}                                                          
/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
	if (TROSY[A]=='y')  rgpulse(pw, t4, 0.0, 0.0);
	else                sim3pulse(pw, 0.0, pwN, t4, zero, t10, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl5, gt5);
	if (TROSY[A]=='y')   delay(lambda - 0.65*(pw + pwN) - gt5);
	else   delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	txphase(one);
	dec2phase(t11);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(pw, 0.0, pwN, one, zero, t11, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl6, gt5);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	dec2phase(t10);
	zgradpulse(gzlvl6, gt5);
	if (TROSY[A]=='y')   delay(lambda - 1.6*pwN - gt5);
	else   delay(lambda - 0.65*pwN - gt5);

	if (TROSY[A]=='y')   dec2rgpulse(pwN, t10, 0.0, 0.0); 
	else    	     rgpulse(pw, zero, 0.0, 0.0); 

	delay((gt1/10.0) + 1.0e-4 +gstab - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);

	rgpulse(2.0*pw, zero, 0.0,rof1);
	dec2power(dpwr2);				       /* POWER_DELAY */
        if (mag_flg[A] == 'y')    magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);
        else   zgradpulse(icosel*gzlvl2, gt1/10.0);            /* 2.0*GRADIENT_DELAY */

        delay(gstab);
        rcvron();
statusdelay(C,1.0e-4 - rof1);
   if (dm3[B]=='y') lk_sample();

	setreceiver(t12);
}		 
Exemple #4
0
pulsesequence()
{



/* DECLARE AND LOAD VARIABLES */

char        f1180[MAXSTR],   		      /* Flag to start t1 @ halfdwell */
            f2180[MAXSTR],    		      /* Flag to start t2 @ halfdwell */
            mag_flg[MAXSTR],      /* magic-angle coherence transfer gradients */
 	    TROSY[MAXSTR],			    /* do TROSY on N15 and H1 */
	    h1dec[MAXSTR],		/* Flag to waltz-decouple of H1 for t1*/
	    CT_c[MAXSTR];           /* Flag to constant time evolution for C13*/
 
int         icosel,          			  /* used to get n and p type */
            t1_counter,  		        /* used for states tppi in t1 */
            t2_counter,  	 	        /* used for states tppi in t2 */
	    ni2 = getval("ni2");

double      tau1,         				         /*  t1 delay */
            tau2,        				         /*  t2 delay */
            timeTC = getval("timeTC"),     /* constant time for 13C evolution */
            timeTN = getval("timeTN"),     /* constant time for 15N evolution */
	    kappa = 5.4e-3,
	    lambda = 2.4e-3,
	    taud = 1.7e-3,
            
	pwClvl = getval("pwClvl"), 	        /* coarse power for C13 pulse */
        pwC = getval("pwC"),          /* C13 90 degree pulse length at pwClvl */
	rf0,            	  /* maximum fine power when using pwC pulses */

/* 90 degree pulse at Ca (56ppm), first off-resonance null at CO (174ppm)     */
        pwC1,		              /* 90 degree pulse length on C13 at rf1 */
        rf1,		       /* fine power for 4.7 kHz rf for 600MHz magnet */

/* 180 degree pulse at Ca (56ppm), first off-resonance null at CO(174ppm)     */
        pwC2,		                    /* 180 degree pulse length at rf2 */
        rf2,		      /* fine power for 10.5 kHz rf for 600MHz magnet */

/* the following pulse lengths for SLP pulses are automatically calculated    */
/* by the macro "BPcal".  SLP pulse shapes, "offC9" etc are called       */
/* directly from your shapelib.                    			      */
   pwC9 = getval("pwC9"),  /*180 degree pulse at CO(174ppm) null at Ca(56ppm) */
   pwC9a = getval("pwC9a"),    /* pwC9a=pwC9, but not set to zero when pwC9=0 */
   phshift9,             /* phase shift induced on Ca by pwC9 ("offC9") pulse */
   pwZ,					   /* the largest of pwC9 and 2.0*pwN */
   pwZ1,                /* the larger of pwC9a and 2.0*pwN for 1D experiments */
   rf9,	                           /* fine power for the pwC9 ("offC9") pulse */

   compH = getval("compH"),       /* adjustment for C13 amplifier compression */
   compC = getval("compC"),       /* adjustment for C13 amplifier compression */

   	pwHs = getval("pwHs"),	        /* H1 90 degree pulse length at tpwrs */
   	tpwrs,	  	              /* power for the pwHs ("H2Osinc") pulse */

   	pwHd,	    		        /* H1 90 degree pulse length at tpwrd */
   	tpwrd,	  	                   /* rf for WALTZ decoupling */

        waltzB1 = getval("waltzB1"),  /* waltz16 field strength (in Hz)     */

	pwNlvl = getval("pwNlvl"),	              /* power for N15 pulses */
        pwN = getval("pwN"),          /* N15 90 degree pulse length at pwNlvl */

	sw1 = getval("sw1"),
	sw2 = getval("sw2"),

	gt1 = getval("gt1"),  		       /* coherence pathway gradients */
        gzcal = getval("gzcal"),             /* g/cm to DAC conversion factor */
	gzlvl1 = getval("gzlvl1"),
	gzlvl2 = getval("gzlvl2"),

	gt0 = getval("gt0"),				   /* other gradients */
	gt3 = getval("gt3"),
	gt4 = getval("gt4"),
	gt5 = getval("gt5"),
	gt7 = getval("gt7"),
	gstab = getval("gstab"),
	gzlvl0 = getval("gzlvl0"),
	gzlvl3 = getval("gzlvl3"),
	gzlvl4 = getval("gzlvl4"),
	gzlvl5 = getval("gzlvl5"),
	gzlvl6 = getval("gzlvl6"),
	gzlvl7 = getval("gzlvl7");

    getstr("f1180",f1180);
    getstr("f2180",f2180);
    getstr("mag_flg",mag_flg);
    getstr("TROSY",TROSY);
    getstr("h1dec",h1dec);
    getstr("CT_c",CT_c);



/*   LOAD PHASE TABLE    */

	settable(t3,2,phi3);
	settable(t4,1,phx);
	settable(t5,4,phi5);
   if (TROSY[A]=='y')
       {settable(t8,1,phy);
	settable(t9,1,phx);
 	settable(t10,1,phy);
	settable(t11,1,phx);
	settable(t12,4,recT);}
    else
       {settable(t8,1,phx);
	settable(t9,8,phi9);
	settable(t10,1,phx);
	settable(t11,1,phy);
	settable(t12,4,rec);}




/*   INITIALIZE VARIABLES   */

    if( dpwrf < 4095 )
	{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
	  psg_abort(1); }

    /* maximum fine power for pwC pulses */
	rf0 = 4095.0;
	
     /* 90 degree pulse on Ca, null at CO 118ppm away */
       pwC1 = sqrt(15.0)/(4.0*118.0*dfrq);
        rf1 = (compC*4095.0*pwC)/pwC1;
        rf1 = (int) (rf1 + 0.5);

    /* 180 degree pulse on Ca, null at CO 118ppm away */
        pwC2 = sqrt(3.0)/(2.0*118.0*dfrq);
        rf2 = (4095.0*compC*pwC*2.0)/pwC2;
        rf2 = (int) (rf2 + 0.5);
        if( rf2 > 4095.0 )
         {printf("increase pwClvl so that C13 90 < 24us*(600/sfrq)"); psg_abort(1);}

    /* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
        rf9 = (compC*4095.0*pwC*2.0*1.65)/pwC9a; /* needs 1.65 times more     */
        rf9 = (int) (rf9 + 0.5);                 /* power than a square pulse */

    /* the pwC9 pulse at the middle of t1  */
        if ((ni2 > 0.0) && (ni == 1.0)) ni = 0.0;
        if (pwC9a > 2.0*pwN) pwZ = pwC9a; else pwZ = 2.0*pwN;
        if ((pwC9==0.0) && (pwC9a>2.0*pwN)) pwZ1=pwC9a-2.0*pwN; else pwZ1=0.0;
        if (ni > 1)  pwC9 = pwC9a;
        if ( pwC9 > 0 )  phshift9 = 320.0;
	else             phshift9 = 0.0;

    /* selective H20 one-lobe sinc pulse */
    tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /* needs 1.69 times more */
    tpwrs = (int) (tpwrs);                       /* power than a square pulse */

    /* power level and pulse time for WALTZ 1H decoupling */
	pwHd = 1/(4.0 * waltzB1) ;                           
	tpwrd = tpwr - 20.0*log10(pwHd/(compH*pw));
	tpwrd = (int) (tpwrd + 0.5);
 


/* CHECK VALIDITY OF PARAMETER RANGES */

    if ( 0.5*ni*1/(sw1) > timeTC)
       { printf(" ni is too big. Make ni less than %d . Check by using dps and make sure no ? appears for d2=t1max (ni/sw1).\n", 
  	 ((int)((timeTC)*2.0*sw1-7))); psg_abort(1);   }

    if ( 0.5*ni2*1/(sw2) > timeTN - WFG3_START_DELAY)
       { printf(" ni2 is too big. Make ni2 equal to %d or less.\n", 
  	 ((int)((timeTN - WFG3_START_DELAY)*2.0*sw2))); psg_abort(1);}

    if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
       { printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}

    if ( dm2[A] == 'y' || dm2[B] == 'y' )
       { printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}

    if ( dm3[A] == 'y' || dm3[C] == 'y' )
       { printf("incorrect dec3 decoupler flags! Should be 'nyn' or 'nnn' ");
							             psg_abort(1);}	
    if ( dpwr2 > 46 )
       { printf("dpwr2 too large! recheck value  "); psg_abort(1);}

    if ( pw > 20.0e-6 )
       { printf(" pw too long ! recheck value "); psg_abort(1);} 
  
    if ( pwN > 100.0e-6 )
       { printf(" pwN too long! recheck value "); psg_abort(1);} 
 
    if ( TROSY[A]=='y' && dm2[C] == 'y')
       { text_error("Choose either TROSY='n' or dm2='n' ! "); psg_abort(1);}



/* PHASES AND INCREMENTED TIMES */

/*  Phase incrementation for hypercomplex 2D data, States-Haberkorn element */

    if (phase1 == 2)   tsadd(t3,1,4);  
    if (TROSY[A]=='y')
	 {  if (phase2 == 2)   				      icosel = +1;
            else 	    {tsadd(t4,2,4);  tsadd(t10,2,4);  icosel = -1;}
	 }
    else {  if (phase2 == 2)  {tsadd(t10,2,4); icosel = +1;}
            else 			       icosel = -1;    
	 }


/*  Set up f1180  */
   
    tau1 = d2;
    if((f1180[A] == 'y') && (ni > 1.0)) 
	{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
    tau1 = tau1/2.0;


/*  Set up f2180  */

    tau2 = d3;
    if((f2180[A] == 'y') && (ni2 > 1.0)) 
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2/2.0;



/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t12,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t8,2,4); tsadd(t12,2,4); }



/* BEGIN PULSE SEQUENCE */

status(A);
delay(d1);
if ( dm3[B] == 'y' )
  { lk_hold(); lk_sampling_off();}  /*freezes z0 correction, stops lock pulsing*/

rcvroff();
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
decpwrf(rf0);
obsoffset(tof);
txphase(zero);
delay(1.0e-5);

dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(gzlvl0, 0.5e-3);
delay(1.0e-4);
dec2rgpulse(pwN, one, 0.0, 0.0);
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(0.7*gzlvl0, 0.5e-3);
delay(5.0e-4);

rgpulse(pw,zero,0.0,0.0);                      /* 1H pulse excitation */

dec2phase(zero);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);

sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

txphase(one);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);

rgpulse(pw, one, 0.0, 0.0);

if (TROSY[A]=='y')
   {
    txphase(two);
    obspower(tpwrs);
    shaped_pulse("H2Osinc",pwHs,two,5.0e-4,0.0);
    obspower(tpwr);
    zgradpulse(gzlvl3, gt3);
    delay(2.0e-4);
    dec2rgpulse(pwN, zero, 0.0, 0.0);

    delay(0.5*kappa - 2.0*pw);
    rgpulse(2.0*pw, two, 0.0, 0.0);

    dec2phase(zero);
    decpwrf(rf2);
    delay(timeTN - 0.5*kappa);
   }

else
   {
    txphase(zero);
    obspower(tpwrs);
    shaped_pulse("H2Osinc",pwHs,zero,5.0e-4,0.0);
    obspower(tpwrd);
    zgradpulse(gzlvl3, gt3);
    delay(2.0e-4);
    dec2rgpulse(pwN, zero, 0.0, 0.0);

    txphase(one);
    delay(kappa - pwHd - 2.0e-6 - PRG_START_DELAY);

    rgpulse(pwHd,one,0.0,0.0);
    txphase(zero);
    delay(2.0e-6);
    obsprgon("waltz16", pwHd, 90.0);	          /* PRG_START_DELAY */
    xmtron();
    decphase(zero);
    dec2phase(zero);
    decpwrf(rf2);
    delay(timeTN - kappa);
   }

	sim3pulse(0.0, pwC2, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	decphase(t3);
	decpwrf(rf1);
	delay(timeTN);

	dec2rgpulse(pwN, zero, 0.0, 0.0);
if (TROSY[A]=='n')
   {
    xmtroff();
    obsprgoff();
    if (h1dec[0]=='y')
      rgpulse(pwHd,three,2.0e-6,0.0);
    else
      rgpulse(pwHd,one,2.0e-6,0.0);
   }

   zgradpulse(gzlvl3, gt3);
   txphase(one);
   delay(2.0e-4);

if(h1dec[0]=='y')
   {
     obspower(tpwrd);
     rgpulse(pwHd,one,0.0,0.0);
     txphase(zero);
     delay(2.0e-6);
     obsprgon("waltz16", pwHd, 90.0);	       
     xmtron();
   }

      if ( dm3[B] == 'y' )     /* begins optional 2H decoupling */
        {
          dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
          dec3unblank();
          dec3phase(zero);
          delay(2.0e-6);
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
        }

decrgpulse(pwC1,t3,0.0,0.0);
decphase(zero);
/*   xxxxxxxxxxxxxxxxxxxxxx       13Ca EVOLUTION        xxxxxxxxxxxxxxxxxx    */

if (CT_c[0]=='n')  {
  if ((ni>1.0) && (tau1>0.0))          /* total 13C evolution equals d2 exactly */
   {         /* 2.0*pwC1/PI compensates for evolution at 64% rate duting pwC1 */
	decpwrf(rf9);
     if(tau1 - 2.0*pwC1/PI - WFG3_START_DELAY - 0.5*pwZ > 0.0)
	   {
	delay(tau1 - 2.0*pwC1/PI - WFG3_START_DELAY - 0.5*pwZ);
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC9", "", 0.0, pwC9a, 2.0*pwN, zero, zero, zero,
								      0.0, 0.0);
	initval(phshift9, v9);
	decstepsize(1.0);
	dcplrphase(v9);  				        /* SAPS_DELAY */
	delay(tau1 - 2.0*pwC1/PI  - SAPS_DELAY - 0.5*pwZ - 2.0e-6);
	   }
      else
	   {
	initval(180.0, v9);
	decstepsize(1.0);
	dcplrphase(v9);  				        /* SAPS_DELAY */
	delay(2.0*tau1 - 4.0*pwC1/PI - SAPS_DELAY - 2.0e-6);
	   }
   }

  else if (ni==1.0)         /* special 1D check of pwC9 phase enabled when ni=1 */
    {
	decpwrf(rf9);
	delay(10.0e-6 + SAPS_DELAY + 0.5*pwZ1);
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC9", "", 0.0, pwC9, 2.0*pwN, zero, zero, zero,
							          2.0e-6, 0.0);
	initval(phshift9, v9);
	decstepsize(1.0);
	dcplrphase(v9);  					/* SAPS_DELAY */
	delay(10.0e-6 + WFG3_START_DELAY + 0.5*pwZ1);
     }

  else			       /* 13Ca evolution refocused for 1st increment  */
    {
	decpwrf(rf2);
	decrgpulse(pwC2, zero, 2.0e-6, 0.0);
     }

}

else {   /* %%%%%%%%%%STARTING 13Ca Constant Time EVOLUTION %%%%%%%%%%%%%%%%%%*/
    decpwrf(rf9);
    if(tau1 - 2.0*pwC1/PI - WFG_START_DELAY -POWER_DELAY> 0.0) {
       delay(tau1 -2.0*pwC1/PI -POWER_DELAY -WFG_START_DELAY);
       sim3shaped_pulse("","offC9","",0.0,pwC9a, 2.0*pwN, zero, zero, zero, 
								0.0, 0.0);
    }
    else {
       sim3shaped_pulse("","offC9","",0.0,pwC9a, 2.0*pwN, zero, zero, zero, 
								0.0, 0.0);
    }
    if (h1dec[0]=='n'){
      delay(taud-POWER_DELAY);
      obspower(tpwr);
      rgpulse(2.0*pw,zero,0.0,0.0);
        if ( dm3[B] == 'y' )   /* turns off 2H decoupling  */
           {
           delay(timeTC -pwZ -2.0*WFG_STOP_DELAY -taud -2.0*pw -1/dmf3 -2.0e-6 -202.0e-6 -gt7);
           setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
           dec3rgpulse(1/dmf3,three,2.0e-6,2.0e-6);
           dec3blank();
           }
      else{				       /* Should be forbidden?? */
        delay(timeTC -pwZ -WFG_STOP_DELAY -taud -2.0*pw -202.0e-6 -gt7);
      } 
    }
    else {						/*  hdec=y    */
        if ( dm3[B] == 'y' )   /* turns off 2H decoupling  */
           {
           delay(timeTC -pwZ -2.0*WFG_STOP_DELAY -PRG_STOP_DELAY -pwHd -1/dmf3
						-4.0e-6-202.0e-6-gt7);
           xmtroff();
           obsprgoff();
           rgpulse(pwHd,three,2.0e-6,2.0e-6);
           setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
           dec3rgpulse(1/dmf3,three,2.0e-6,2.0e-6);
           dec3blank();
           }
      else{
        delay(timeTC -pwZ -WFG_STOP_DELAY -PRG_STOP_DELAY -4.0e-6 -202.0e-6
								-gt7);
        xmtroff();     
        obsprgoff();   
        rgpulse(pwHd,three,2.0e-6,2.0e-6);
     }
  }

    delay(2.0e-6);
    zgradpulse(gzlvl7,gt7);
    delay(200.0e-6-POWER_DELAY);
    decpwrf(rf2);

    decrgpulse(pwC2, zero, 0.0, 0.0); 	             /* 13Ca 180 degree pulse */ 

    delay(2.0e-6);
    zgradpulse(gzlvl7,gt7); 
    delay(200.0e-6);

    if (h1dec[0]=='n') {
      if ( dm3[B] == 'y' )     /* begins optional 2H decoupling */
        {
          dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
          dec3unblank();
          dec3phase(zero);
          delay(2.0e-6);
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
        delay(timeTC-tau1-202.0e-6-gt7-2.0*WFG_START_DELAY-1/dmf3-
	  2.0*POWER_DELAY-pwC9a-2.0e-6-WFG_STOP_DELAY-SAPS_DELAY);
        }
      else{                                            /* Should be forbidden??? */
        delay(timeTC -tau1 - 202.0e-6 - gt7-2.0*POWER_DELAY-pwC9a-
	  WFG_START_DELAY-WFG_STOP_DELAY-2.0e-6-SAPS_DELAY);
      }
    }
    else {
      if (dm3[B]=='y') {
	rgpulse(pwHd,one,0.0,0.0);
        txphase(zero);
        delay(2.0e-6);
        obsprgon("waltz16", pwHd, 90.0);
        xmtron();

          dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
          dec3unblank();
          dec3phase(zero);
          delay(2.0e-6);
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
        delay(timeTC-tau1-202.0e-6-gt7-2.0*WFG_START_DELAY-4.0e-6-1/dmf3-pwHd-
	           PRG_START_DELAY-2.0*POWER_DELAY-pwC9a-2.0e-6-SAPS_DELAY);
      }
      else {
        delay(2.0e-6);
        rgpulse(pwHd,one,0.0,0.0);
        txphase(zero);
        delay(2.0e-6);
        obsprgon("waltz16", pwHd, 90.0);
        xmtron();
        delay(timeTC-tau1-202.0e-6-gt7-4.0e-6-pwHd-PRG_START_DELAY-
	  2.0*POWER_DELAY-pwC9a-WFG_START_DELAY-WFG_STOP_DELAY-SAPS_DELAY);
      }
    }
    decpwrf(rf9);

    decshaped_pulse("offC9",pwC9a,zero,0.0,0.0); 
    initval(phshift9, v9);
    decstepsize(1.0);
    dcplrphase(v9);                                         /* SAPS_DELAY */

}  /* %%%%%%%%%%%%%%%%%%ENDING 13Ca Constant Time EVOLUTION %%%%%%%%%%%%%%%%%%*/


  decphase(t5);
  decpwrf(rf1);
  decrgpulse(pwC1, t5, 2.0e-6, 0.0);

  dec2phase(t8);
  dcplrphase(zero);

        if ( dm3[B] == 'y' )   /* turns off 2H decoupling  */
           {
           setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
           dec3rgpulse(1/dmf3,three,2.0e-6,2.0e-6);
           dec3blank();
           lk_autotrig();   /* resumes lock pulsing */
           }
  if (h1dec[0]=='y')
  {
    xmtroff();
    obsprgoff();
    rgpulse(pwHd,three,2.0e-6,0.0);
    txphase(one);
  }

  delay(2.0e-6);
  zgradpulse(gzlvl4, gt4);
  delay(2.0e-4);
  if (TROSY[A]=='n') {
    rgpulse(pwHd,one,0.0,0.0);
    txphase(zero);
    delay(2.0e-6);
    obsprgon("waltz16", pwHd, 90.0);
    xmtron();
  }

/* %%%%%%%%%%%%%%%%%%STARTING N15 Constant Time Evolution %%%%%%%%%%%%%%%%%%*/

	dec2rgpulse(pwN, t8, 0.0, 0.0);

	decphase(zero);
	dec2phase(t9);
	decpwrf(rf2);
	delay(timeTN - tau2);

	sim3pulse(0.0, pwC2, 2.0*pwN, zero, zero, t9, 0.0, 0.0);

	dec2phase(t10);
        decpwrf(rf9);

if (TROSY[A]=='y')
{    if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.5e-4 + pwHs)
	{
	  txphase(three);
          delay(timeTN - pwC9a - WFG_START_DELAY);         /* WFG_START_DELAY */
          decshaped_pulse("offC9", pwC9a, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.5e-4 - pwHs);
          if (mag_flg[A]=='y')  magradpulse(gzcal*gzlvl1, gt1);
          else  zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwrs);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
	  txphase(t4);
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(0.5e-4 - POWER_DELAY);
	}

    else if (tau2 > pwHs + 0.5e-4)
	{
	  txphase(three);
          delay(timeTN-pwC9a-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else  zgradpulse(gzlvl1, gt1);	   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwrs);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                     /* WFG_START_DELAY */
          decshaped_pulse("offC9", pwC9a, zero, 0.0, 0.0);
          delay(tau2 - pwHs - 0.5e-4);
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
	  txphase(t4);
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(0.5e-4 - POWER_DELAY);
	}
    else
	{
	  txphase(three);
          delay(timeTN - pwC9a - WFG_START_DELAY - gt1 - 2.0*GRADIENT_DELAY
							    - 1.5e-4 - pwHs);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else  zgradpulse(gzlvl1, gt1);	   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwrs);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                     /* WFG_START_DELAY */
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
	  txphase(t4);
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(0.5e-4 - POWER_DELAY);
          decshaped_pulse("offC9", pwC9a, zero, 0.0, 0.0);
          delay(tau2);
	}
}
else
{
    if (tau2 > kappa)
	{
          delay(timeTN - pwC9a - WFG_START_DELAY);     	   /* WFG_START_DELAY */
          decshaped_pulse("offC9", pwC9a, zero, 0.0, 0.0);
          delay(tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
          delay(kappa - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else if (tau2 > (kappa - pwC9a - WFG_START_DELAY))
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);                                     /* WFG_START_DELAY */
          decshaped_pulse("offC9", pwC9a, zero, 0.0, 0.0);
          delay(kappa -pwC9a -WFG_START_DELAY -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
          delay(kappa - tau2 - pwC9a - WFG_START_DELAY);   /* WFG_START_DELAY */
          decshaped_pulse("offC9", pwC9a, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
	  obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
    	  delay(kappa-tau2-pwC9a-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                    /* WFG_START_DELAY */
          decshaped_pulse("offC9", pwC9a, zero, 0.0, 0.0);
          delay(tau2);
	}
}                                                          
/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
	if (TROSY[A]=='y')  rgpulse(pw, t4, 0.0, 0.0);
	else                sim3pulse(pw, 0.0, pwN, t4, zero, t10, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl5, gt5);
	if (TROSY[A]=='y')   delay(lambda - 0.65*(pw + pwN) - gt5);
	else   delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	txphase(one);
	dec2phase(t11);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(pw, 0.0, pwN, one, zero, t11, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl6, gt5);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	dec2phase(t10);
	zgradpulse(gzlvl6, gt5);
	if (TROSY[A]=='y')   delay(lambda - 1.6*pwN - gt5);
	else   delay(lambda - 0.65*pwN - gt5);

	if (TROSY[A]=='y')   dec2rgpulse(pwN, t10, 0.0, 0.0); 
	else    	     rgpulse(pw, zero, 0.0, 0.0); 

	delay((gt1/10.0) + 1.0e-4 +gstab - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);

	rgpulse(2.0*pw, zero, 0.0, rof1);
	dec2power(dpwr2);				       /* POWER_DELAY */
        if (mag_flg[A] == 'y')    magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);
        else   zgradpulse(icosel*gzlvl2, gt1/10.0);            /* 2.0*GRADIENT_DELAY */

        delay(gstab);
        rcvron();
statusdelay(C,1.0e-4 - rof1);
   if (dm3[B]=='y') lk_sample();

	setreceiver(t12);
}		 
pulsesequence()
{

/* DECLARE AND LOAD VARIABLES */

char        f1180[MAXSTR],   		      /* Flag to start t1 @ halfdwell */
             Cfilter[MAXSTR];     /*do C' Cfilter */
 
int         icosel,          			  /* used to get n and p type */
            t1_counter;  		        /* used for states tppi in t1 */

double tCN = getval("tCN"), 
		kappa, /*semi-constant time scale factor*/
		tau1,         				         /*  t1 delay */
	    lambda = 0.91/(4.0*getval("JNH")), 	   /* 1/4J H1 evolution delay */
        

   pwClvl = getval("pwClvl"), 	  	        /* coarse power for C13 pulse */
   pwC = getval("pwC"),     	      /* C13 90 degree pulse length at pwClvl */
   rf0,            	          /* maximum fine power when using pwC pulses */

	pwC3 = getval("pwC3"), /* 180 selective Ca null on C' */
	pwC8 = getval("pwC8"), /* 180 selective C' null on Ca */
	pwC6 = getval("pwC6"), /* 90 selective C' null on Ca */
	rf3,
	rf8,
	rf6,

   compH = getval("compH"),        /* adjustment for H1 amplifier compression */
   compN = getval("compN"),       /* adjustment for N15 amplifier compression */
   compC = getval("compC"),       /* adjustment for C13 amplifier compression */


  tpwrsf_n = getval("tpwrsf_n"), /* fine power adustment for first soft pulse(TROSY=y)*/
  tpwrsf_d = getval("tpwrsf_d"), /* fine power adustment for second soft pulse(TROSY=y)*/
   	pwHs = getval("pwHs"),	        /* H1 90 degree pulse length at tpwrs */
   	tpwrs,	  	              /* power for the pwHs ("H2Osinc") pulse */

	pwNlvl = getval("pwNlvl"),	              /* power for N15 pulses */
        pwN = getval("pwN"),          /* N15 90 degree pulse length at pwNlvl */

	sw1 = getval("sw1"),

	gt1 = getval("gt1"),  		       /* coherence pathway gradients */
        gzcal = getval("gzcal"),               /* dac to G/cm conversion      */
	gzlvl1 = getval("gzlvl1"),
	gzlvl2 = getval("gzlvl2"),

	gt0 = getval("gt0"),				   /* other gradients */
	gt3 = getval("gt3"),
	gt5 = getval("gt5"),
	gstab = getval("gstab"),
	gzlvl0 = getval("gzlvl0"),
	gzlvl3 = getval("gzlvl3"),
	gzlvl5 = getval("gzlvl5");

    getstr("f1180",f1180);
	getstr("Cfilter",Cfilter);

/*   LOAD PHASE TABLE    */

	settable(t1,2,phi1);
	settable(t2,4,phi2);
	settable(t3,1,phi3);
	settable(t4,2,rec);


/*   INITIALIZE VARIABLES   */

/* maximum fine power for pwC pulses */
	rf0 = 4095.0;

    /* 180 degree square pulse on Ca, null at CO 118ppm away */
    rf3 = (1/compC*compC*4095.0*pwC*2.0)/pwC3; /* no need for compC at high power level*/
	rf3 = (int) (rf3 + 0.5);

    /* 90 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf6 = (compC*4095.0*pwC*1.69)/pwC6;	/* needs 1.69 times more     */
	rf6 = (int) (rf6 + 0.5);		/* power than a square pulse */

    /* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf8 = (compC*4095.0*pwC*2.0*1.65)/pwC8;	/* needs 1.65 times more     */
	rf8 = (int) (rf8 + 0.5);		/* power than a square pulse */
	



/* selective H20 one-lobe sinc pulse */
    tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69));   /*needs 1.69 times more*/
    tpwrs = (int) (tpwrs);                   	  /*power than a square pulse */

/* CHECK VALIDITY OF PARAMETER RANGES */

  if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' ))
  { text_error("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1); }

  if((dm2[A] == 'y' || dm2[B] == 'y'))
  { text_error("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1); }

  if( dpwr2 > 50 )
  { text_error("don't fry the probe, DPWR2 too large!  ");   	    psg_abort(1); }

  if( pw > 50.0e-6 )
  { text_error("dont fry the probe, pw too high ! ");               psg_abort(1); } 
  
  if( pwN > 100.0e-6 )
  { text_error("dont fry the probe, pwN too high ! ");              psg_abort(1); }



/* PHASES AND INCREMENTED TIMES */

/*  Phase incrementation for hypercomplex 2D data, States-Haberkorn element */

	if (phase1 == 1)   	 icosel = -1;
        else 	  {  tsadd(t3,2,4);  icosel = +1;  }


/*  Set up f1180  */
   
    tau1 = d2;
    if((f1180[A] == 'y') && (ni > 1.0)) 
	{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
    tau1 = tau1/2.0;



/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t1,2,4); tsadd(t4,2,4); }

	kappa = tCN>ni/sw1? 1:tCN/(ni/sw1);
	kappa = ((double)((int)(kappa*1000)))/1000; 
       /* 3 digits after the point, may cause a small decrease in value for safe boundary */

	printf("kappa = %f\n", kappa);

/* BEGIN PULSE SEQUENCE */

status(A);

	obspower(tpwr);
	decpower(pwClvl);
	decpwrf(rf0);
 	dec2power(pwNlvl);
	txphase(zero);
        decphase(zero);
        dec2phase(zero);

	delay(d1);

 
/*  xxxxxxxxxxxxxxxxx  CONSTANT SAMPLE HEATING FROM N15 RF xxxxxxxxxxxxxxxxx  */

 

/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
    rcvroff();

	/*dec2rgpulse(pwN, zero, 0.0, 0.0); */  /*destroy N15 magnetization*/
	zgradpulse(gzlvl0, 0.5e-3);
	delay(1.0e-4);

	/*dec2rgpulse(pwN, one, 0.0, 0.0); */
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	txphase(t1);
	delay(5.0e-4);

 
   	rgpulse(pw,zero,0.0,0.0);                 /* 1H pulse excitation */

	txphase(zero);
   	dec2phase(zero);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

   	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero,zero, zero, 0.0, 0.0);

   	txphase(one);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

 	rgpulse(pw, three, 0.0, 0.0);
	txphase(two);

         obspower(tpwrs+6.0);
           obspwrf(tpwrsf_n);
   	   shaped_pulse("H2Osinc_n", pwHs, zero, 5.0e-5, 0.0);
	 obspower(tpwr); obspwrf(4095.0);

	zgradpulse(gzlvl3, gt3);
	dec2phase(t1);
	delay(gstab);
	decpwrf(rf8);   
   	dec2rgpulse(pwN, t1, 0.0, 0.0);
	txphase(zero);
	decphase(zero);


/*  xxxxxxxxxxxxxxxxxx    OPTIONS FOR N15 EVOLUTION    xxxxxxxxxxxxxxxxxxxxx  */

	txphase(zero);
	dec2phase(zero);

/* shared CT for C' Cfilter and N15 chem shift evolution */
	delay(tCN/2.0 - kappa*tau1 - gt5 -gstab);
	zgradpulse(gzlvl5,gt5);
	delay(gstab);
	if(Cfilter[A] == 'y' && (1-kappa)*tau1 < pwC8/2) {
		sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero,0.0,0.0);
		zgradpulse(gzlvl5,gt5);
	    delay(tCN/2.0 + (1-kappa)*tau1 -gt5 - pwC3 - pwC8);
	}
	else if (Cfilter[A] == 'y' && (1-kappa)*tau1 >= pwC8/2){
		dec2rgpulse(2.0*pwN,zero,(pwC8-2.0*pwN)/2.0,(pwC8-2.0*pwN)/2.0);
		if( (1-kappa)*tau1 >= gt5 +gstab + pwC8/2){
			zgradpulse(gzlvl5,gt5);
			delay((1-kappa)*tau1 -pwC8/2.0 - gt5);
			decshaped_pulse("offC8", pwC8,zero,0.0,0.0); 
			delay(tCN/2.0 - pwC3 - 1.5*pwC8);
		}
		else{
			delay((1-kappa)*tau1 -pwC8/2.0);
			decshaped_pulse("offC8", pwC8,zero,0.0,0.0);
			zgradpulse(gzlvl5,gt5); 
			delay(tCN/2.0 -gt5 - pwC3 - 1.5*pwC8);
		}			
	}
	else{
		dec2rgpulse(2.0*pwN,zero,(pwC8-2.0*pwN)/2.0,(pwC8-2.0*pwN)/2.0);
		zgradpulse(gzlvl5,gt5);
	   delay(tCN/2.0 + (1-kappa)*tau1 -gt5 - pwC3 - pwC8);
	}
	

	decpwrf(rf3);
	decshaped_pulse("offC3", pwC3, zero,0.0, 0.0);
	decpwrf(rf8);
	if(Cfilter[A] == 'y'){
		delay(pwC8);
	}
	else {
		decshaped_pulse("offC8", pwC8,zero,0.0,0.0); 
	}

	delay(tau1);
	
	/* gradient for coherence selection and H(z)N(x/y)C(x/y) destruction  */
	decpwrf(rf6);
	if(Cfilter[A] == 'y' ){
		decshaped_pulse("offC6", pwC6, zero, 0.0, 0.0);
	}
	else{
		decshaped_pulse("offC6", pwC6, zero, 0.0, 0.0); /*delay(pwC6);*/
	}
	zgradpulse(gzlvl1, gt1);   	
	dec2phase(t2);
	delay(gstab - 2.0*GRADIENT_DELAY);
	dec2rgpulse(2.0*pwN, t2, 0.0, 0.0);
	delay(gt1+gstab + pwC6);


	txphase(three);
	txphase(t4);



/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
	sim3pulse(pw,0.0,pwN, zero,zero, t3, 0.0, 0.0);

        if (tpwrsf_d<4095.0)
        {
         obspwrf(tpwrsf_d); obspower(tpwrs+6.0);
   	 shaped_pulse("H2Osinc_d", pwHs, zero, 5.0e-5, 0.0);
	 obspower(tpwr); obspwrf(4095.0);
        }
        else
        {   
         obspower(tpwrs);
   	 shaped_pulse("H2Osinc_d", pwHs, zero, 5.0e-5, 0.0);
	 obspower(tpwr);
        }	

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl5, gt5);
	delay(lambda - 0.65*(pw + pwN) - gt5 - pwHs - 2.0*POWER_DELAY -2.0*PWRF_DELAY -50.0e-6);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	txphase(one);
	dec2phase(zero);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(pw, 0.0, pwN, one, zero, zero, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(1.5*gzlvl5, gt5);
	delay(lambda - 1.3*pwN - gt5 );

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	dec2phase(one);
	zgradpulse(1.5*gzlvl5, gt5);
	delay(lambda - 1.6*pwN - gt5);

	sim3pulse(pw, 0.0, pwN, one, zero, one, 0.0, 0.0); 

	delay((gt1/10.0) + 1.0e-4 +gstab - 0.65*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);

	rgpulse(2.0*pw, zero, 0.0, 0.0);

	dec2power(dpwr2);				       /* POWER_DELAY */
        
      zgradpulse(icosel*gzlvl2, 0.1*gt1);		/* 2.0*GRADIENT_DELAY */
        delay(gstab);
        rcvron();
statusdelay(C,1.0e-4);		

	setreceiver(t4);
}		 
Exemple #6
0
pulsesequence()
{

  /* DECLARE AND LOAD VARIABLES */

  char f1180[MAXSTR],		/* Flag to start t1 @ halfdwell */
       f2180[MAXSTR],		/* Flag to start t2 @ halfdwell */
       mag_flg[MAXSTR],		/* Flag to use magic-angle gradients */
       H2O_flg[MAXSTR], stCdec[MAXSTR],		/* calls STUD+ waveforms from shapelib */
       STUD[MAXSTR];		/* apply automatically calculated STUD decoupling */

  int t1_counter,		/* used for states tppi in t1 */
      t2_counter;		/* used for states tppi in t2 */

  double tau1,			/*  t1 delay */
         tau2,			/*  t2 delay */
         delta1, delta2, TC = getval("TC"),	/*  3.5 ms  */
         ni = getval("ni"), ni2 = getval("ni2"),
	 stdmf = getval("dmf80"),	/* dmf for 80 ppm of STUD decoupling */
         rf80 = getval("rf80"),	/* rf in Hz for 80ppm STUD+ */
         taua = getval("taua"),	/* time delays for CH coupling evolution */
         taub = getval("taub"), tauc = getval("tauc"),
	 /* string parameter stCdec calls stud decoupling waveform from your shapelib. */
         studlvl,		/* coarse power for STUD+ decoupling */
         bw, ofs, ppm,		/* temporary Pbox parameters */
         pwClvl = getval("pwClvl"),	/* coarse power for C13 pulse */
         pwC = getval("pwC"),	/* C13 90 degree pulse length at pwClvl */
  /* the following pulse length for the SLP pulse is automatically calculated   */
  /* by the macro "hcch_cosy".  The SLP pulse shape,"offC10" is called          */
  /* directly from your shapelib.                                               */
         pwC10,			/* 180 degree selective sinc pulse on CO(174ppm) */
         rf7,			/* fine power for the pwC10 ("offC10") pulse */
         compC = getval("compC"),	/* adjustment for C13 amplifier compression */
         pwmax, pwNlvl = getval("pwNlvl"),	/* power for N15 pulses */
         pwN = getval("pwN"),	/* N15 90 degree pulse length at pwNlvl */
         sw1 = getval("sw1"), sw2 = getval("sw2"), gt1 = getval("gt1"),
         gt2 = getval("gt2"), gt3 = getval("gt3"), gt4 = getval("gt4"),
         gt5 = getval("gt5"), gt7 = getval("gt7"), gt8 = getval("gt8"),
         gt9 = getval("gt9"), gzcal = getval("gzcal"), gzlvl1 = getval("gzlvl1"),
         gzlvl2 = getval("gzlvl2"), gzlvl3 = getval("gzlvl3"), gzlvl4 = getval("gzlvl4"),
         gzlvl5 = getval("gzlvl5"), gzlvl7 = getval("gzlvl7"), gzlvl8 = getval("gzlvl8"),
         gzlvl9 = getval("gzlvl9");

  getstr("f1180", f1180);
  getstr("f2180", f2180);
  getstr("H2O_flg", H2O_flg);
  getstr("STUD", STUD);
  /* 80 ppm STUD+ decoupling */
  strcpy(stCdec, "stCdec80");
  studlvl = pwClvl + 20.0 * log10(compC * pwC * 4.0 * rf80);
  studlvl = (int) (studlvl + 0.5);


  /*   INITIALIZE VARIABLES   */

  if (dpwrf < 4095)
  {
    printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
    psg_abort(1);
  }

  setautocal();			/* activate auto-calibration flags */

  if (autocal[0] == 'n')
  {
    /* "offC10": 180 degree one-lobe sinc pulse on CO, null at Ca 139ppm away */
    pwC10 = getval("pwC10");
    rf7 = (compC * 4095.0 * pwC * 2.0 * 1.65) / pwC10;	/* needs 1.65 times more     */
    rf7 = (int) (rf7 + 0.5);	/* power than a square pulse */

    if (pwC > (24.0e-6 * 600.0 / sfrq))
    {
      printf("Increase pwClvl so that pwC < 24*600/sfrq");
      psg_abort(1);
    }
  }
  else
    /* if autocal = 'y'(yes), 'q'(quiet), r(read), or 's'(semi) */
  {
    if (FIRST_FID)		/* call Pbox */
    {
      ppm = getval("dfrq");
      bw = 118.0 * ppm;
      ofs = 139.0 * ppm;
      offC10 = pbox_make("offC10", "sinc180n", bw, ofs, compC * pwC, pwClvl);
      if (dm3[B] == 'y')
	H2ofs = 3.2;
      ofs_check(H1ofs, C13ofs, N15ofs, H2ofs);
    }
    rf7 = offC10.pwrf;
    pwC10 = offC10.pw;
  }

  if ((dm3[A] == 'y' || dm3[C] == 'y'))
  {
    printf("incorrect dec1 decoupler flags! Should be 'nyn' or 'nnn' ");
    psg_abort(1);
  }


  getstr("f1180", f1180);
  getstr("f2180", f2180);
  getstr("mag_flg", mag_flg);
  getstr("H2O_flg", H2O_flg);

  pwmax = 2.0 * pwN;
  if (pwC10 > pwmax)
    pwmax = pwC10;

  /* check validity of parameter range */

  if ((dm[A] == 'y' || dm[B] == 'y'))
  {
    printf("incorrect Dec1 decoupler flags!  ");
    psg_abort(1);
  }

  if ((dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y'))
  {
    printf("incorrect Dec2 decoupler flags! Should be nnn  ");
    psg_abort(1);
  }

  if (dpwr > 50)
  {
    printf("don't fry the probe, dpwr too large!  ");
    psg_abort(1);
  }

  if (dpwr2 > 50)
  {
    printf("don't fry the probe, dpwr2 too large!  ");
    psg_abort(1);
  }

  /* LOAD VARIABLES */

  settable(t1, 2, phi1);
  settable(t2, 4, phi2);
  settable(t3, 16, phi3);
  settable(t4, 2, phi4);

  settable(t11, 8, rec);

  /* INITIALIZE VARIABLES */

  /* Phase incrementation for hypercomplex data */

  if (phase1 == 2)		/* Hypercomplex in t1 */
  {
    tsadd(t1, 1, 4);
  }

  if (phase2 == 2)
  {
    tsadd(t2, 1, 4);
  }

  /* calculate modification to phases based on current t1 values
   to achieve States-TPPI acquisition */

  if (ix == 1)
    d2_init = d2;
  t1_counter = (int) ((d2 - d2_init) * sw1 + 0.5);
  if (t1_counter % 2)
  {
    tsadd(t1, 2, 4);
    tsadd(t11, 2, 4);
  }

  /* calculate modification to phases based on current t2 values
   to achieve States-TPPI acquisition */

  if (ix == 1)
    d3_init = d3;
  t2_counter = (int) ((d3 - d3_init) * sw2 + 0.5);
  if (t2_counter % 2)
  {
    tsadd(t2, 2, 4);
    tsadd(t11, 2, 4);
  }

  /* set up so that get (90, -180) phase corrects in F1 if f1180 flag is y */

  tau1 = d2;
  if (f1180[A] == 'y')
  {
    tau1 += (1.0 / (2.0 * sw1));
  }
  if (tau1 < 1.0e-6)
    tau1 = 0.0;
  tau1 = tau1 / 2.0;

  /* set up so that get (90, -180) phase corrects in F2 if f2180 flag is y */

  tau2 = d3;
  if (f2180[A] == 'y')
  {
    tau2 += (1.0 / (2.0 * sw2));
  }
  if (tau2 < 1.0e-6)
    tau2 = 0.0;
  tau2 = tau2 / 2.0;

  if (ni > 1)
    delta1 = (double) (t1_counter * (taua - gt2 - 0.2e-3)) / ((double) (ni - 1));
  else
    delta1 = 0.0;
  if (ni2 > 1)
    delta2 = (double) (t2_counter * (TC - 0.6e-3)) / ((double) (ni2 - 1));
  else
    delta2 = 0.0;

  initval(7.0, v1);
  obsstepsize(45.0);

  /* BEGIN ACTUAL PULSE SEQUENCE */

  status(A);
  delay(10.0e-6);
  obspower(tpwr);
  decpower(pwClvl);
  decpwrf(4095.0);
  dec2power(pwNlvl);
  decphase(zero);
  dec2phase(zero);
  xmtrphase(v1);
  txphase(t1);
  if (dm3[B] == 'y')
    lk_sample();
  delay(d1);
  if (dm3[B] == 'y')
  {
    lk_hold();
    lk_sampling_off();
  }				/*freezes z0 correction, stops lock pulsing */
  rcvroff();

  if (gt1 > 0.2e-6)
  {
    decrgpulse(pwC, zero, rof1, rof1);
    delay(2.0e-6);
    zgradpulse(gzlvl1, gt1);
    delay(1.0e-3);
  }

  if (dm3[B] == 'y')		/* begins optional 2H decoupling */
  {
    dec3rgpulse(1 / dmf3, one, 10.0e-6, 2.0e-6);
    dec3unblank();
    dec3phase(zero);
    delay(2.0e-6);
    setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
  }

  status(B);
  rgpulse(pw, t1, 1.0e-4, 2.0e-6);
  xmtrphase(zero);
  zgradpulse(gzlvl2, gt2);
  delay(taua - gt2 - 2.0 * pwC - 2.0e-6 - SAPS_DELAY);
  txphase(zero);
  delay(tau1);
  decrgpulse(2.0 * pwC, zero, 0.0, 0.0);
  delay(tau1 - delta1);
  rgpulse(2.0 * pw, zero, 0.0, 2.0e-6);
  zgradpulse(gzlvl2, gt2);
  txphase(one);
  delay(taua - delta1 - gt2 - 2.0e-6);
  rgpulse(pw, one, 0.0, 2.0e-6);

  if (mag_flg[A] == 'y')
  {
    magradpulse(gzcal * gzlvl3, gt3);
  }
  else
  {
    zgradpulse(gzlvl3, gt3);
  }
  decphase(t2);
  txphase(zero);
  delay(200.0e-6);

  decrgpulse(pwC, t2, 2.0e-6, 0.0);

  decphase(zero);
  decpwrf(rf7);
  delay(tau2);
  sim3shaped_pulse("", "offC10", "", 0.0, pwC10, 2.0 * pwN, zero, zero, zero, 0.0, 0.0);
  delay(taub - pwmax - WFG_START_DELAY - WFG_STOP_DELAY - POWER_DELAY);
  rgpulse(2.0 * pw, zero, 0.0, 0.0);

  decphase(t3);
  decpwrf(4095.0);
  delay(TC - taub + tau2 - delta2 - 2.0 * pw - POWER_DELAY);
  decrgpulse(2.0 * pwC, t3, 0.0, 0.0);
  decphase(t4);
  delay(TC - delta2 - POWER_DELAY);

  decrgpulse(pwC, t4, 0.0, 2.0e-6);
  zgradpulse(gzlvl4, gt4);
  txphase(zero);
  decphase(zero);
  delay(tauc - gt4);
  decrgpulse(2.0 * pwC, zero, 0.0, 2.0e-6);

  if (H2O_flg[A] == 'y')
  {
    delay(tauc - gt4 - 500.0e-6 - POWER_DELAY);
    zgradpulse(gzlvl4, gt4);
    decphase(one);
    obspwrf(1000.0);
    delay(500.0e-6);
    decrgpulse(pwC, one, 0.0, 1.0e-6);
    rgpulse(900 * pw, one, rof1, 0.0);
    txphase(zero);
    rgpulse(500 * pw, zero, 2.0e-6, 2.0e-6);
    obspwrf(4095.0);
    if (mag_flg[A] == 'y')
    {
      magradpulse(gzcal * gzlvl5, gt5);
    }
    else
    {
      zgradpulse(gzlvl5, gt5);
    }
    decphase(one);
    delay(200.0e-6);
    simpulse(pw, pwC, zero, one, 0.0, 2.0e-6);
    zgradpulse(gzlvl7, gt7);
    decphase(zero);
    delay(taub - gt7);
    simpulse(2.0 * pw, 2.0 * pwC, zero, zero, 0.0, 2.0e-6);
    zgradpulse(gzlvl7, gt7);
    delay(taub - gt7);
  }
  else
  {
    delay(tauc - taub - 2.0 * pw - POWER_DELAY);
    rgpulse(2.0 * pw, zero, 0.0, 2.0e-6);
    zgradpulse(gzlvl4, gt4);
    delay(taub - gt4 - 2.0e-6);
  }

  decrgpulse(pwC, zero, 0.0, 2.0e-6);
  if (mag_flg[A] == 'y')
  {
    magradpulse(gzcal * gzlvl8, gt8);
  }
  else
  {
    zgradpulse(gzlvl8, gt8);
  }
  txphase(zero);
  delay(200.0e-6);
  if (dm3[B] == 'y')		/* turns off 2H decoupling  */
  {
    setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
    dec3rgpulse(1 / dmf3, three, 2.0e-6, 2.0e-6);
    dec3blank();
    lk_autotrig();		/* resumes lock pulsing */
  }
  rgpulse(pw, zero, 0.0, 2.0e-6);
  if (mag_flg[A] == 'y')
  {
    magradpulse(gzcal * gzlvl9, gt9);
  }
  else
  {
    zgradpulse(gzlvl9, gt9);
  }
  delay(taua - gt9);
  simpulse(2.0 * pw, 2.0 * pwC, zero, zero, 0.0, 2.0e-6);
  if (mag_flg[A] == 'y')
  {
    magradpulse(gzcal * gzlvl9, gt9);
  }
  else
  {
    zgradpulse(gzlvl9, gt9);
  }

  if (STUD[A] == 'y')
    decpower(studlvl);
  else
    decpower(dpwr);
  dec2power(dpwr2);

  delay(taua - gt9 - rof1 - 0.5 * pw - 2.0 * POWER_DELAY);
  rgpulse(pw, zero, rof1, rof2);
  rcvron();
  if (dm3[B] == 'y')
    lk_sample();
  setreceiver(t11);

  if ((STUD[A] == 'y') && (dm[C] == 'y'))
  {
        decunblank();
        decon();
        decprgon(stCdec,1/stdmf, 1.0);
        startacq(alfa);
        acquire(np, 1.0/sw);
        decprgoff();
        decoff();
        decblank();
    if (dm2[C] == 'y')
    {
      setstatus(DEC2ch, TRUE, dmm2[C], FALSE, dmf2);
    }
  }
  else
    status(C);
  setreceiver(t11);
}
Exemple #7
0
pulsesequence()
{

int     t1_counter;
char	    N15refoc[MAXSTR],		/* N15 pulse in middle of t1*/
            TROSY[MAXSTR];
double
   tau1, tauxh,
   gzlvl3=getval("gzlvl3"),
   gt3=getval("gt3"),
   cor=getval("cor")*1.0e-6,
   JCH = getval("JCH"),
   pwN = getval("pwN"),
   pwNlvl = getval("pwNlvl"),      
   sw1 = getval("sw1"),
   pwClvl = getval("pwClvl"), 	  	        /* coarse power for C13 pulse */
   pwC = getval("pwC"),     	      /* C13 90 degree pulse length at pwClvl */
   rf0,            	          /* maximum fine power when using pwC pulses */
   rfst,	                           /* fine power for the stCall pulse */

   compC = getval("compC");       /* adjustment for C13 amplifier compression */

    getstr("N15refoc",N15refoc);
    getstr("TROSY",TROSY);

/* maximum fine power for pwC pulses (and initialize rfst) */
	rf0 = 4095.0;    rfst=0.0;

/* 180 degree adiabatic C13 pulse from 0 to 200 ppm */
       {rfst = (compC*4095.0*pwC*4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35));   
	rfst = (int) (rfst + 0.5);
	if (( 1.0/(4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35)) < pwC ) && (ni > 1))
           { text_error( " Not enough C13 RF. pwC must be %f usec or less.\n", 
	    (1.0e6/(4000.0*sqrt((30.0*sfrq/600.0+7.0)/0.35))) ); psg_abort(1); }}

   initval(0.0,v1);
   initval(3.0,v2);
   initval(1.0,v3);
   initval(2.0,v4);

/* check validity of parameter range */


    if((dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y') )
	{
	printf("incorrect Dec2 decoupler flags!  ");
	psg_abort(1);
    } 


    if( dpwr2 > 50)
    {
	printf("don't fry the probe, dpwr too large!  ");
	psg_abort(1);
    }


/* LOAD VARIABLES */

if (TROSY[A] == 'y')
 {settable(t1, 8, phT1);
  settable(t2, 8, phT2);
  settable(t3, 8, phT3);
  settable(t4,16, phi4);
  settable(t5, 8, recT);}
else
 {settable(t1, 4, phi1);
  settable(t2, 2, phi2);
  settable(t3, 8, phi3);
  settable(t4, 16, phi4);
  settable(t5, 8, rec);}

/* INITIALIZE VARIABLES */

    tauxh = ((JCH != 0.0) ? 1/(4*(JCH)) : 2.25e-3);

/* Phase incrementation for hypercomplex data */

   if ( phase1 == 2 )     /* Hypercomplex in t1 */
   {
        tsadd(t2, 1, 4); 
   } 


/* calculate modification to phases based on current t1 values
   to achieve States-TPPI acquisition */
 
 
   if(ix == 1)
      d2_init = d2;
      t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5);

      if(t1_counter %2) {
        tsadd(t2,2,4);
        tsadd(t5,2,4);
      }
   tau1 = d2;
   tau1 = tau1/2.0;

/*sequence starts!!*/

   status(A);
   obspower(tpwr);
   dec2power(pwNlvl);
   decpower(pwClvl);
   decpwrf(rfst);
   delay(d1);
   rcvroff();
   status(B);

  rgpulse(pw, v1, 0.0, 0.0);

  zgradpulse(0.3*gzlvl3,gt3);

  txphase(zero);
  dec2phase(zero);

  delay(tauxh-gt3- WFG2_START_DELAY - 0.5e-3 + 70.0e-6);               /* delay=1/4J(XH)   */

  sim3shaped_pulse("","stC200","",2*pw,1.0e-3,0.0,zero,zero,zero,0.0,0.0);

  zgradpulse(0.3*gzlvl3,gt3);

  decphase(t2);
  delay(tauxh-gt3- WFG2_START_DELAY - 0.5e-3 + 70.0e-6 );               /* delay=1/4J(XH)   */
if (TROSY[A] == 'y')

 {
  rgpulse(pw, v3, 0.0,0.0);

  zgradpulse(-0.5*gzlvl3,gt3);
  decpwrf(rf0); delay(200.0e-6);

  decrgpulse(pwC, t2, 0.0, 0.0);

  txphase(t1); decphase(zero);
  if (tau1>0.0)
   {
        if ( (N15refoc[A]=='y') && (tau1 > (pwN/2.0 +2.0*pwC/PI) ) )
           {delay(tau1 - pwN -2.0*pwC/PI);     
            dec2rgpulse(2.0*pwN, zero, 0.0, 0.0);
            delay(tau1 - pwN -2.0*pwC/PI);}     
        else
           { if (tau1>2.0*pwC/PI) 
              delay(2.0*tau1-4.0*pwC/PI);
             else
               delay(2.0*tau1);
           }
   }

  rgpulse(pw, t1, 0.0,0.0);

  decpwrf(rfst);
  zgradpulse(0.3*gzlvl3,gt3);
  delay(tauxh-gt3-WFG2_START_DELAY - 0.5e-3 + 70.0e-6);
  sim3shaped_pulse("","stC200","",2*pw,1.0e-3,0.0,zero,zero,zero,0.0,0.0);  zgradpulse(0.3*gzlvl3,gt3);
  delay(tauxh-gt3-WFG2_START_DELAY - 0.5e-3 + 70.0e-6);
  sim3pulse(pw,pwC,0.0,two,zero,one,0.0,0.0); 
   zgradpulse(gzlvl3,gt3);
   txphase(v4);

   delay(tauxh-gt3-WFG2_START_DELAY - 0.5e-3 + 70.0e-6);

   rgpulse(pw*0.231,v4,0.0,0.0);
   delay(d3);
   rgpulse(pw*0.692,v4,0.0,0.0);
   delay(d3);
   rgpulse(pw*1.462,v4,0.0,0.0);

   delay(d3/2);
   sim3shaped_pulse("","stC200","",0.0,1.0e-3,0.0,zero,zero,zero,0.0,0.0);
   txphase(v1);
   delay(d3/2);

   rgpulse(pw*1.462,v1,0.0,0.0);
   delay(d3);
   rgpulse(pw*0.692,v1,0.0,0.0);
   delay(d3);
   rgpulse(pw*0.231,v1,0.0,0.0);
   dec2phase(t3);
   zgradpulse(gzlvl3,gt3); decpwrf(rf0);
   delay(tauxh-gt3-WFG2_START_DELAY - 0.5e-3 + 70.0e-6);
   decrgpulse(pwC, t3, 0.0,0.0);}

else
   { 
  rgpulse(pw, t1, 0.0,0.0);

  zgradpulse(0.5*gzlvl3,gt3); decpwrf(rf0);
  delay(200.0e-6);

  decrgpulse(pwC, t2, 0.0, 0.0);

  txphase(t4); decphase(zero);
  if (tau1>0.0)
   {
  	if ( (N15refoc[A]=='y') && (tau1 > (pwN+2.0*pwC/PI)) )
           {delay(tau1 - pwN -2.0*pwC/PI);     
            sim3pulse(2*pw,0.0,2.0*pwN, zero, zero, zero,0.0, 0.0);
            delay(tau1 - pwN -2.0*pwC/PI);}
	else
            {
             if (tau1 > (pw +2.0*pwC/PI))
              {delay(tau1-pw -2.0*pwC/PI); rgpulse(2.0*pw, t4, 0.0, 0.0); decphase(t3); delay(tau1-pw -2.0*pwC/PI);}
             else
              {delay(tau1); decphase(t3); delay(tau1);} 
            }             
   }
  decrgpulse(pwC, t3, 0.0, 0.0);

  zgradpulse(0.5*gzlvl3,gt3);
  delay(200.0e-6);

  rgpulse(pw, v4, 0.0,0.0);

  decphase(zero);
  
  zgradpulse(gzlvl3,gt3);
  decpwrf(rfst);
  txphase(zero);
  dec2phase(zero);

  delay(tauxh-gt3- WFG2_START_DELAY - 0.5e-3 + 70.0e-6);               /* delay=1/4J(XH)   */
   rgpulse(pw*0.231,v2,0.0,0.0);
   delay(d3);
   rgpulse(pw*0.692,v2,0.0,0.0);
   delay(d3);
   rgpulse(pw*1.462,v2,0.0,0.0);

   delay(d3/2.0);
  sim3shaped_pulse("","stC200","",0.0,1.0e-3,0.0,zero,zero,zero,0.0,0.0);
   delay(d3/2.0);
  
   rgpulse(pw*1.462,v3,0.0,0.0);
   delay(d3);
   rgpulse(pw*0.692,v3,0.0,0.0);
   delay(d3);
   rgpulse(pw*0.231,v3,0.0,0.0);
   zgradpulse(gzlvl3,gt3);
   decpwrf(rf0);
   delay(tauxh-gt3- WFG2_START_DELAY - 0.5e-3 + 70.0e-6 +cor );}               /* delay=1/4J(XH)   */
   decpower(dpwr);
   setreceiver(t5);
status(C);
   rcvron();

}
Exemple #8
0
pulsesequence()
{

/* DECLARE AND LOAD VARIABLES */

char        f1180[MAXSTR],   		      /* Flag to start t1 @ halfdwell */
            f2180[MAXSTR],    		      /* Flag to start t2 @ halfdwell */
            mag_flg[MAXSTR],      /* magic-angle coherence transfer gradients */
 	    TROSY[MAXSTR];			    /* do TROSY on N15 and H1 */

 
int         icosel,          			  /* used to get n and p type */
            t1_counter,  		        /* used for states tppi in t1 */
            t2_counter,  	 	        /* used for states tppi in t2 */
	    ni = getval("ni"),
	    ni2 = getval("ni2");

double      tau1,         				         /*  t1 delay */
            tau2,        				         /*  t2 delay */
            t1a,                       /* time increments for first dimension */
            t1b,
            t1c,
	    tauCH = getval("tauCH"), 		         /* 1/4J delay for CH */
            timeTN = getval("timeTN"),     /* constant time for 15N evolution */
            timeAB = getval("timeAB"),	   /* set timeAB=1.9e-3 to get only Ha */
            				  /* set timeAB=3.3e-3 to maximize Hb */
            				  /* set timeAB=2.8e-3 for both Ha/Hb */
	    zeta = 3.0e-3,
	    eta = 4.6e-3,
	    theta = 14.0e-3,
	    kappa = 5.4e-3,
	    lambda = 2.4e-3,
            sheila,  /* to transfer J evolution time hyperbolically into tau1 */
            
	pwClvl = getval("pwClvl"), 	        /* coarse power for C13 pulse */
        pwC = getval("pwC"),          /* C13 90 degree pulse length at pwClvl */
	rf0,            	  /* maximum fine power when using pwC pulses */

/* 90 degree pulse at Cab(46ppm), first off-resonance null at CO (174ppm)     */
        pwC1,		              /* 90 degree pulse length on C13 at rf1 */
        rf1,		       /* fine power for 5.1 kHz rf for 600MHz magnet */

/* 180 degree pulse at Cab(46ppm), first off-resonance null at CO(174ppm)     */
        pwC2,		                    /* 180 degree pulse length at rf2 */
        rf2,		      /* fine power for 11.4 kHz rf for 600MHz magnet */

/* the following pulse lengths for SLP pulses are automatically calculated    */
/* by the macro "proteincal".  SLP pulse shapes, "offC4" etc are called       */
/* directly from your shapelib.                    			      */
   pwC4 = getval("pwC4"),  /*180 degree pulse at Ca(56ppm) null at CO(174ppm) */
   pwC5 = getval("pwC5"),     /* 90 degree selective sinc pulse on CO(174ppm) */
   pwC7 = getval("pwC7"),    /* 180 degree selective sinc pulse on CO(174ppm) */
   rf4,	                           /* fine power for the pwC4 ("offC4") pulse */
   rf5,	                           /* fine power for the pwC5 ("offC5") pulse */
   rf7,	                           /* fine power for the pwC7 ("offC7") pulse */

   compH = getval("compH"),       /* adjustment for C13 amplifier compression */
   compC = getval("compC"),       /* adjustment for C13 amplifier compression */
   phi7cal = getval("phi7cal"),  /* phase in degrees of the last C13 90 pulse */

   	pwH,	    		        /* H1 90 degree pulse length at tpwr1 */
   	tpwr1,	  	                            /* 7.3 kHz rf for DIPSI-2 */
   	DIPSI2time,     	        /* total length of DIPSI-2 decoupling */
        ncyc_dec,
        waltzB1=getval("waltzB1"),     /* RF strength for 1H decoupling      */

	pwNlvl = getval("pwNlvl"),	              /* power for N15 pulses */
        pwN = getval("pwN"),          /* N15 90 degree pulse length at pwNlvl */

	sw1 = getval("sw1"),
	sw2 = getval("sw2"),

	gt1 = getval("gt1"),  		       /* coherence pathway gradients */
        gzcal  = getval("gzcal"),            /* g/cm to DAC conversion factor */
	gzlvl1 = getval("gzlvl1"),
	gzlvl2 = getval("gzlvl2"),

	gt0 = getval("gt0"),				   /* other gradients */
	gt3 = getval("gt3"),
	gt4 = getval("gt4"),
	gt5 = getval("gt5"),
	gstab = getval("gstab"),
	gzlvl0 = getval("gzlvl0"),
	gzlvl3 = getval("gzlvl3"),
	gzlvl4 = getval("gzlvl4"),
	gzlvl5 = getval("gzlvl5"),
	gzlvl6 = getval("gzlvl6");

    getstr("f1180",f1180);
    getstr("f2180",f2180);
    getstr("mag_flg",mag_flg);
    getstr("TROSY",TROSY);



/*   LOAD PHASE TABLE    */

	settable(t3,1,phx);
	settable(t4,1,phx);
	settable(t5,2,phi5);
	settable(t6,2,phi6);
   if (TROSY[A]=='y')
       {settable(t8,1,phy);
	settable(t9,1,phx);
 	settable(t10,1,phy);
	settable(t11,1,phx);
	settable(t12,2,recT);}
    else
       {settable(t8,1,phx);
	settable(t9,8,phi9);
	settable(t10,1,phx);
	settable(t11,1,phy);
	settable(t12,4,rec);}




/*   INITIALIZE VARIABLES   */

    if( dpwrf < 4095 )
	{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
	  psg_abort(1); }

    if( pwC > 24.0e-6*600.0/sfrq )
	{ printf("increase pwClvl so that pwC < 24*600/sfrq");
	  psg_abort(1); }

    /* maximum fine power for pwC pulses */
	rf0 = 4095.0;

    /* 90 degree pulse on Cab, null at CO 128ppm away */
	pwC1 = sqrt(15.0)/(4.0*128.0*dfrq);
        rf1 = (compC*4095.0*pwC)/pwC1;
	rf1 = (int) (rf1 + 0.5);
	
    /* 180 degree pulse on Cab, null at CO 128ppm away */
        pwC2 = sqrt(3.0)/(2.0*128.0*dfrq);
	rf2 = (4095.0*compC*pwC*2.0)/pwC2;
	rf2 = (int) (rf2 + 0.5);	
	
    /* 180 degree pulse on Ca, null at CO 118ppm away */
	rf4 = (compC*4095.0*pwC*2.0)/pwC4;
	rf4 = (int) (rf4 + 0.5);

    /* 90 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf5 = (compC*4095.0*pwC*1.69)/pwC5;	/* needs 1.69 times more     */
	rf5 = (int) (rf5 + 0.5);		/* power than a square pulse */

    /* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf7 = (compC*4095.0*pwC*2.0*1.65)/pwC7;	/* needs 1.65 times more     */
	rf7 = (int) (rf7 + 0.5);		/* power than a square pulse */
	

    /* power level and pulse times for DIPSI 1H decoupling */
	DIPSI2time = 2.0*3.0e-3 + 2.0*14.0e-3 + 2.0*timeTN - 5.4e-3 + 0.5*pwC1 + 2.0*pwC5 + 5.0*pwN + 2.0*gt3 + 1.0e-4 + 4.0*GRADIENT_DELAY + 2.0*POWER_DELAY + 8.0*PRG_START_DELAY;
        pwH = 1.0/(4.0*waltzB1);
	ncyc_dec = (DIPSI2time*90.0)/(pwH*2590.0*4.0);
        ncyc_dec = (int) (ncyc_dec+0.5);
	pwH = (DIPSI2time*90.0)/(ncyc_dec*2590.0*4.0); /*fine correction of pwH */
	tpwr1 = 4095.0*(compH*pw/pwH);
	tpwr1 = (int) (2.0*tpwr1 + 0.5);   /* x2 because obs atten will be reduced by 6dB */
 


if (ix == 1)
      {
        fprintf(stdout, "\nNo of DIPSI-2 cycles = %4.1f\n",ncyc_dec);
        fprintf(stdout, "\nfine power for DIPSI-2 pulse =%6.1f\n",tpwr1);
      }


/* CHECK VALIDITY OF PARAMETER RANGES */

    if ( 0.5*ni2*1/(sw2) > timeTN - WFG3_START_DELAY)
       { printf(" ni2 is too big. Make ni2 equal to %d or less.\n", 
  	 ((int)((timeTN - WFG3_START_DELAY)*2.0*sw2))); psg_abort(1);}

    if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
       { printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}

    if ( dm2[A] == 'y' || dm2[B] == 'y' )
       { printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}

    if ( dm3[A] == 'y' || dm3[C] == 'y' )
       { printf("incorrect dec3 decoupler flags! Should be 'nyn' or 'nnn' ");
							             psg_abort(1);}
    if ( dpwr2 > 50 )
       { printf("dpwr2 too large! recheck value  "); psg_abort(1);}

    if ( pw > 20.0e-6 )
       { printf(" pw too long ! recheck value "); psg_abort(1);} 
  
    if ( pwN > 100.0e-6 )
       { printf(" pwN too long! recheck value "); psg_abort(1);} 
 
    if ( TROSY[A]=='y' && dm2[C] == 'y' )
       { text_error("Choose either TROSY='n' or dm2='n' ! "); psg_abort(1);}



/* PHASES AND INCREMENTED TIMES */

/*  Phase incrementation for hypercomplex 2D data, States-Haberkorn element */

    if (phase1 == 2)   tsadd(t3,1,4);  
    if (TROSY[A]=='y')
	 {  if (phase2 == 2)   				      icosel = +1;
            else 	    {tsadd(t4,2,4);  tsadd(t10,2,4);  icosel = -1;}
	 }
    else {  if (phase2 == 2)  {tsadd(t10,2,4); icosel = +1;}
            else 			       icosel = -1;    
	 }



/*  Set up f1180  */
   
    tau1 = d2;
    if((f1180[A] == 'y') && (ni > 1.0)) 
	{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
    tau1 = tau1/2.0;



/*  Hyperbolic sheila seems superior to original zeta approach  */

                                  /* subtract unavoidable delays from tauCH */
    tauCH = tauCH - gt0 - 2.0*GRADIENT_DELAY - 5.0e-5;

 if ((ni-1)/(2.0*sw1) > 2.0*tauCH)
    {
      if (tau1 > 2.0*tauCH) sheila = tauCH;
      else if (tau1 > 0) sheila = 1.0/(1.0/tau1+1.0/tauCH-1.0/(2.0*tauCH));
      else          sheila = 0.0;
    }
 else
    {
      if (tau1 > 0) sheila = 1.0/(1.0/tau1 + 1.0/tauCH - 2.0*sw1/((double)(ni-1)));
      else          sheila = 0.0;
    }
    t1a = tau1 + tauCH;
    t1b = tau1 - sheila;
    t1c = tauCH - sheila;



/*  Set up f2180  */

    tau2 = d3;
    if((f2180[A] == 'y') && (ni2 > 1.0)) 
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2/2.0;



/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t12,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t8,2,4); tsadd(t12,2,4); }


/* For ni<2 (calibration) set timeAB=1.5ms to get avoid signal cancellation between Ha and Hb */
   if (ni < 2.0) timeAB=1.5e-3;



/* BEGIN PULSE SEQUENCE */


status(A);
        delay(d1);
        if ( dm3[B] == 'y' )
           lk_sample();  /*freezes z0 correction, stops lock pulsing*/

        if ((ni/sw1-d2)>0)
         delay(ni/sw1-d2);       /*decreases as t1 increases for const.heating*/
        if ((ni2/sw2-d3)>0)
         delay(ni2/sw2-d3);      /*decreases as t2 increases for const.heating*/
        if ( dm3[B] == 'y' )
          { lk_hold(); lk_sampling_off();}  /*freezes z0 correction, stops lock pulsing*/

        rcvroff();
        obspower(tpwr);
        decpower(pwClvl);
        dec2power(pwNlvl);
        decpwrf(rf0);
        obsoffset(tof);
        txphase(one);
        delay(1.0e-5);
        if (TROSY[A] == 'n')
        dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
        decrgpulse(pwC, zero, 0.0, 0.0);
        zgradpulse(gzlvl0, 0.5e-3);
        delay(1.0e-4);
        if (TROSY[A] == 'n')
        dec2rgpulse(pwN, one, 0.0, 0.0);
        decrgpulse(pwC, zero, 0.0, 0.0);
        zgradpulse(0.7*gzlvl0, 0.5e-3);
        delay(5.0e-4);

      if ( dm3[B] == 'y' )     /* begins optional 2H decoupling */
        {
          gzlvl0=0.0; gzlvl3=0.0; gzlvl4=0.0;   /* no gradients during 2H decoupling */
          dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
          dec3unblank();
          dec3phase(zero);
          delay(2.0e-6);
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
        }

        rgpulse(pw, one, 0.0, 0.0);                    /* 1H pulse excitation */
                                                                /* point a */
        txphase(zero);
        decphase(zero);
        zgradpulse(gzlvl0, gt0);                        /* 2.0*GRADIENT_DELAY */
        delay(5.0e-5);
        if((t1a -2.0*pwC) > 0.0) delay(t1a - 2.0*pwC);

        decrgpulse(2.0*pwC, zero, 0.0, 0.0);

        delay(t1b);

        rgpulse(2.0*pw, zero, 0.0, 0.0);

        zgradpulse(gzlvl0, gt0);                        /* 2.0*GRADIENT_DELAY */
        txphase(t3);
        delay(5.0e-5);
        delay(t1c);
                                                                /* point b */
        rgpulse(pw, t3, 0.0, 0.0);
        zgradpulse(gzlvl3, gt3);
        delay(2.0e-4);
        decrgpulse(pwC, zero, 0.0, 0.0);
                                                                /* point c */
        zgradpulse(gzlvl4, gt4);
        decpwrf(rf2);
        delay(timeAB - gt4);

        simpulse(2*pw, pwC2, zero, zero, 0.0, 0.0);

        zgradpulse(gzlvl4, gt4);
        delay(timeAB - gt4);
                                                                /* point d */

/* ghc_co_nh STOPS HERE */
/* gcbca_co_nh STARTS HERE */


	decpwrf(rf1);                                         	/* point b */
   	decrgpulse(pwC1, zero, 2.0e-6, 0.0);
	obspwrf(tpwr1); obspower(tpwr-6);				      /* POWER_DELAY */
	obsprgon("dipsi2", pwH, 5.0);		          /* PRG_START_DELAY */
	xmtron();
                    						/* point c */
	decpwrf(rf0);
	decphase(t5);
	delay(zeta - 2.0*POWER_DELAY - PRG_START_DELAY - 0.5*10.933*pwC);

	decrgpulse(pwC*158.0/90.0, t5, 0.0, 0.0);
	decrgpulse(pwC*171.2/90.0, t6, 0.0, 0.0);
	decrgpulse(pwC*342.8/90.0, t5, 0.0, 0.0);	/* Shaka composite   */
	decrgpulse(pwC*145.5/90.0, t6, 0.0, 0.0);
	decrgpulse(pwC*81.2/90.0, t5, 0.0, 0.0);
	decrgpulse(pwC*85.3/90.0, t6, 0.0, 0.0);

	decpwrf(rf1);
	decphase(zero);
	delay(zeta - 0.5*10.933*pwC - 0.5*pwC1);
                     						/* point d */
   	decrgpulse(pwC1, zero, 0.0, 0.0);
	decphase(t5);
	decpwrf(rf5);
        if ( dm3[B] == 'y' )   /* turns off 2H decoupling  */
           {
           setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
           dec3rgpulse(1/dmf3,three,2.0e-6,2.0e-6);
           dec3blank();
           lk_autotrig();   /* resumes lock pulsing */
           }
	zgradpulse(gzlvl3, gt3);
	delay(2.0e-4);
	decshaped_pulse("offC5", pwC5, t5, 0.0, 0.0);
					      			/* point e */
	decpwrf(rf4);
 	decphase(zero);
	delay(eta);

	decshaped_pulse("offC4", pwC4, zero, 0.0, 0.0);

	decpwrf(rf7);		
	dec2phase(zero);
	delay(theta - eta - pwC4 - WFG3_START_DELAY);
							 /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC7", "", 0.0, pwC7, 2.0*pwN, zero, zero, zero, 
								     0.0, 0.0);

	decpwrf(rf5);
	decpwrf(rf5);
	initval(phi7cal, v7);
	decstepsize(1.0);
	dcplrphase(v7);					       /* SAPS_DELAY */
	dec2phase(t8);
	delay(theta - SAPS_DELAY);
                           					/* point f */
	decshaped_pulse("offC5", pwC5, zero, 0.0, 0.0);

/*  xxxxxxxxxxxxxxxxxx    OPTIONS FOR N15 EVOLUTION    xxxxxxxxxxxxxxxxxxxxx  */

	zgradpulse(gzlvl3, gt3);
        if (TROSY[A]=='y') { xmtroff(); obsprgoff(); }
     	delay(2.0e-4);
	dcplrphase(zero);
	dec2rgpulse(pwN, t8, 0.0, 0.0);

	decpwrf(rf7);
	decphase(zero);
	dec2phase(t9);
	delay(timeTN - WFG3_START_DELAY - tau2);
							 /* WFG3_START_DELAY  */
	sim3shaped_pulse("", "offC7", "", 0.0, pwC7, 2.0*pwN, zero, zero, t9, 
								    0.0, 0.0);

	dec2phase(t10);
        decpwrf(rf4);

if (TROSY[A]=='y')
{
    if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
	{
	  txphase(t4);
          delay(timeTN - pwC4 - WFG_START_DELAY);          /* WFG_START_DELAY */
          decshaped_pulse("offC4", pwC4, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')  magradpulse(gzcal*gzlvl1, gt1);
          else  zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);
	}
    else
	{
	  txphase(t4);
          delay(timeTN -pwC4 -WFG_START_DELAY -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else  zgradpulse(gzlvl1, gt1);	   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);                    /* WFG_START_DELAY */
          decshaped_pulse("offC4", pwC4, zero, 0.0, 0.0);
          delay(tau2);
	}
}
else
{
    if (tau2 > kappa)
	{
          delay(timeTN - pwC4 - WFG_START_DELAY);     	   /* WFG_START_DELAY */
          decshaped_pulse("offC4", pwC4, zero, 0.0, 0.0);
          delay(tau2 - kappa - PRG_STOP_DELAY);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  txphase(t4);
          delay(kappa - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);
	}
    else if (tau2 > (kappa - pwC4 - WFG_START_DELAY))
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  txphase(t4);                                  /* WFG_START_DELAY */
          decshaped_pulse("offC4", pwC4, zero, 0.0, 0.0);
          delay(kappa -pwC4 -WFG_START_DELAY -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);
	}
    else if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  txphase(t4);
          delay(kappa - tau2 - pwC4 - WFG_START_DELAY);   /* WFG_START_DELAY */
          decshaped_pulse("offC4", pwC4, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);
	}
    else
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY);
          xmtroff();
	  obsprgoff();					    /* PRG_STOP_DELAY */
	  txphase(t4);
    	  delay(kappa-tau2-pwC4-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);                    /* WFG_START_DELAY */
          decshaped_pulse("offC4", pwC4, zero, 0.0, 0.0);
          delay(tau2);
	}
}                                                            	/* point g */
/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
	if (TROSY[A]=='y')  rgpulse(pw, t4, 0.0, 0.0);
	else                sim3pulse(pw, 0.0, pwN, t4, zero, t10, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl5, gt5);
	if (TROSY[A]=='y')   delay(lambda - 0.65*(pw + pwN) - gt5);
	else   delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	txphase(one);
	dec2phase(t11);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(pw, 0.0, pwN, one, zero, t11, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl6, gt5);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	dec2phase(t10);
	zgradpulse(gzlvl6, gt5);
	if (TROSY[A]=='y')   delay(lambda - 1.6*pwN - gt5);
	else   delay(lambda - 0.65*pwN - gt5);

	if (TROSY[A]=='y')   dec2rgpulse(pwN, t10, 0.0, 0.0); 
	else    	     rgpulse(pw, zero, 0.0, 0.0); 

	delay((gt1/10.0) + 1.0e-4 +gstab - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);

	rgpulse(2.0*pw, zero, 0.0, rof1);
	dec2power(dpwr2);				       /* POWER_DELAY */
        if (mag_flg[A] == 'y')    magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);
        else   zgradpulse(icosel*gzlvl2, gt1/10.0);            /* 2.0*GRADIENT_DELAY */
        delay(gstab);
        rcvron();
statusdelay(C,1.0e-4 - rof1);
   if (dm3[B]=='y') lk_sample();

	setreceiver(t12);
}		 
Exemple #9
0
 pulsesequence()
 {
  char    
    f1180[MAXSTR],    
    f2180[MAXSTR],
    mag_flg[MAXSTR],  /* y for magic angle, n for z-gradient only  */
    ref_flg[MAXSTR];  /* yes for recording reference spectrum      */

 int        
    icosel,
    phase,
    ni2,     
    t1_counter,   
    t2_counter;   

 double      
    gzcal = getval("gzcal"),
    tau1,       
    tau2,       
    taua,         /*  ~ 1/4JNH =  2.3-2.7 ms]        */
    taub,         /*  ~ 2.75 ms          */
    bigT,         /*  ~ 12 ms            */
    bigTCO,       /*  ~ 25 ms            */
    bigTN,        /*  ~ 12 ms            */

    pwClvl,   /* High power level for carbon on channel 2 */
    pwC,      /* C13 90 degree pulse length at pwClvl     */
    compC,     /* Compression factor for C13 on channel 2  */
    pwCa180,  /* 180 degree pulse length for Ca           */
    pwCab180,
    pwCO180,

    pwNlvl,   /* Power level for Nitrogen on channel 3    */
    pwN,      /* N15 90 degree pulse lenght at pwNlvl     */
    maxcan,   /*  The larger of 2.0*pwN and pwCa180        */

    dpwrfC = 4095.0,
    dfCa180,
    dfCab180,
    dfCO180,
    fac180 = 1.69, 

    gt1,
    gt3,
    gt2,
    gt0,
    gt5,
    gt6,
    gt7,
    gt8,
    gt9,
    gt10,
    gstab,
    gzlvl1,
    gzlvl2,
    gzlvl3,
    gzlvl0,
    gzlvl5,
    gzlvl6,
    gzlvl7,
    gzlvl8,
    gzlvl9,
    gzlvl10;

/* LOAD VARIABLES */

    getstr("f1180",f1180);
    getstr("f2180",f2180);
    getstr("mag_flg", mag_flg);
    getstr("ref_flg", ref_flg);

    taua   = getval("taua"); 
    taub   = getval("taub");
    bigT = getval("bigT");
    bigTCO = getval("bigTCO");
    bigTN = getval("bigTN");
  
    pwClvl = getval("pwClvl");
    pwC = getval("pwC");
    compC = getval("compC");

    pwNlvl = getval("pwNlvl");
    pwN = getval("pwN");
    pwCa180 = getval("pwCa180");
    pwCab180 = getval("pwCab180");
    pwCO180 = getval("pwCO180");

    maxcan = 2.0*pwN;
    if (pwCa180 > maxcan) maxcan = pwCa180;
 
    dpwr = getval("dpwr");
    phase = (int) ( getval("phase") + 0.5);
    phase2 = (int) ( getval("phase2") + 0.5);
    sw1 = getval("sw1");
    sw2 = getval("sw2");
    ni = getval("ni");
    ni2 = getval("ni2");
 
    gt1 = getval("gt1");
    gt2 = getval("gt2");
    gt3 = getval("gt3");
    gt0 = getval("gt0");
    gt5 = getval("gt5");
    gt6 = getval("gt6");
    gt7 = getval("gt7");
    gt8 = getval("gt8");
    gt9 = getval("gt9");
    gstab = getval("gstab");
    gt10 = getval("gt10");
 
    gzlvl1 = getval("gzlvl1");
    gzlvl2 = getval("gzlvl2");
    gzlvl3 = getval("gzlvl3");
    gzlvl5 = getval("gzlvl5");
    gzlvl0 = getval("gzlvl0");
    gzlvl6 = getval("gzlvl6");
    gzlvl7 = getval("gzlvl7");
    gzlvl8 = getval("gzlvl8");
    gzlvl9 = getval("gzlvl9");
    gzlvl10 = getval("gzlvl10");

 
    dfCa180 = (compC*4095.0*pwC*2.0*fac180)/pwCa180;
    dfCab180 = (compC*4095.0*pwC*2.0*fac180)/pwCab180;
    dfCO180  = (compC*4095.0*pwC*2.0*fac180)/pwCO180;

/* LOAD PHASE TABLE */

    settable(t1,4,phi1);
    settable(t2,2,phi2);
    settable(t3,16,phi3);
    settable(t4,16,phi4);
    settable(t5, 1, phi5);
   
    settable(t10,16,rec);
  

/* CHECK VALIDITY OF PARAMETER RANGES */
        
    if((ref_flg[A] == 'y') && (dps_flag))
    {
       printf("ref_flg=y: for 2D HN-CO or 3D HNCO reference spectrum without CO-HB coupling.\n");
    }

    if(ni2/sw2 > 2.0*(bigTN))
    {
       printf(" ni2 is too big, should < %f\n", 2.0*sw2*(bigTN));
    }

    if((ni/sw1 > 2.0*(bigTCO - gt6 - maxcan))&&(ref_flg[A] == 'y'))
    {
       printf("ni is too big, should < %f\n", 2.0*sw1*(bigTCO-gt6-maxcan));
    }
  
    if(( dpwr > 50 ) || (dpwr2 > 50))
    {
        printf("don't fry the probe, either dpwr or dpwr2 is  too large!  ");
        psg_abort(1);
    }

    if((gt1 > 5.0e-3) ||(gt2>5e-3)||(gt3>5e-3)|| (gt0 > 5.0e-3))
    {
        printf("The length of gradients are too long\n");
        psg_abort(1);
    }

    if((taub - 2.0*pw - gt8 - 1.0e-3 - 6.0*GRADIENT_DELAY)<0.0)
    {
        printf("Shorten gt8 so that preceding delay is not negative\n");
        psg_abort(1);
    }

    if((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y'))
    {
        printf("incorrect dec1 decoupler flags! should be 'nnn' ");
        psg_abort(1);
    }

    if((dm2[A] == 'y' || dm2[B] == 'y' ))
    {
        printf("incorrect dec2 decoupler flags! Should be 'nny' ");
        psg_abort(1);
    }

/*  Phase incrementation for hypercomplex 2D data */

    if (phase == 2)
    {
        if(ref_flg[A] == 'y') tsadd(t1,3,4);
        else tsadd(t1, 1, 4);
    }
  
    if (phase2 == 2)
    {
       tsadd(t5,2,4);
       icosel = 1; 
    }
    else icosel = -1;

/*  Set up f1180  half_dwell time (1/sw1)/2.0           */
   
    if (ref_flg[A] == 'y') tau1 = d2;
    else tau1 = d2 - (4.0*pw/PI);

    if(f1180[A] == 'y')
    {
        tau1 += (1.0/(2.0*sw1));
    }
    if(tau1 < 0.2e-6) tau1 = 0.0;
    tau1 = tau1/4.0;

/*  Set up f2180   half dwell time (1/sw2)/2.0           */

    tau2 = d3;
    if(f2180[A] == 'y')
    {
        tau2 += (1.0/(2.0*sw2)); 
    }
    if(tau2 < 0.2e-6) tau2 = 0.0;
    tau2 = tau2/2.0;

/* Calculate modifications to phases for States-TPPI acquisition   */

    if( ix == 1) d2_init = d2 ;
    t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
    if(t1_counter % 2) 
    {
       tsadd(t1,2,4);     
       tsadd(t10,2,4);    
    }
   
    if( ix == 1) d3_init = d3 ;
    t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
    if(t2_counter % 2) 
    {
       tsadd(t2,2,4);  
       tsadd(t10,2,4);    
    }
   

/* BEGIN ACTUAL PULSE SEQUENCE */

 status(A);
    decoffset(dof);
    obspower(tpwr);
    decpower(pwClvl);
    decpwrf(dpwrfC);
    dec2power(pwNlvl);
    txphase(zero);
    dec2phase(zero);

    delay(d1);
    dec2rgpulse(pwN, zero, 0.2e-6, 0.0);
    zgradpulse(gzlvl3, gt3);
    delay(0.001);
    rcvroff();

status(B);
    rgpulse(pw, zero, 1.0e-5, 1.0e-6);
    delay(2.0e-6);
    zgradpulse(0.8*gzlvl0,gt0);
    delay(taua - gt0 - 2.0e-6);
    sim3pulse(2.0*pw,(double)0.0,2.0*pwN,zero,zero,zero, 1.0e-6, 1.0e-6);
 
    delay(taua - gt0 - 500.0e-6);
    zgradpulse(0.8*gzlvl0,gt0);
    txphase(one);
    delay(500.0e-6);
    rgpulse(pw, one, 1.0e-6, 1.0e-6);

    delay(2.0e-6);
    zgradpulse(1.3*gzlvl3, gt3);

    decpwrf(dfCO180);
    txphase(zero);
    delay(200.0e-6);

    dec2rgpulse(pwN, zero, 0.0, 0.0);
    delay(2.0e-6);
    zgradpulse(gzlvl0, gt0);
    delay(taub - gt0 - 2.0*pw - 2.0e-6);
    rgpulse(2.0*pw, zero, 0.0, 0.0);

    delay(bigT - taub - WFG3_START_DELAY);
    sim3shaped_pulse("","offC8","",(double)0.0,pwCO180,2.0*pwN,zero,zero,zero,0.0,0.0);

    delay(bigT - gt0 - WFG3_STOP_DELAY - 1.0e-3);

    zgradpulse(gzlvl0, gt0);
    delay(1.0e-3);
  
    dec2rgpulse(pwN, zero, 0.0, 0.0);
    delay(2.0e-6);
    zgradpulse(gzlvl9, gt9);
    decpwrf(dpwrfC);
    decphase(t3);
    delay(200.0e-6);

    if(ref_flg[A] != 'y')
    {
       decrgpulse(pwC, t3, 0.0, 0.0);
       delay(2.0e-6);
       if(gt6 > 0.2e-6)  
          zgradpulse(gzlvl6, gt6);

       decpwrf(dfCO180);
       txphase(t1);
       delay(bigTCO - gt6 - 2.0e-6); 
       rgpulse(pw, t1, 0.0, 0.0);
       if(tau1 >(pwCab180/2.0 + WFG_START_DELAY +WFG_STOP_DELAY+ POWER_DELAY + pwCO180/2.0))
       {
          decpwrf(dfCab180);
          delay(tau1 - pwCab180/2.0 - WFG_START_DELAY - POWER_DELAY); 
          decshaped_pulse("offC27", pwCab180, zero, 0.0, 0.0);
          decpwrf(dfCO180);
          delay(tau1-pwCO180/2.0-pwCab180/2.0-WFG_STOP_DELAY-WFG_START_DELAY-POWER_DELAY);
          decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0);
          decpwrf(dfCab180);
          delay(tau1-pwCO180/2.0-pwCab180/2.0-WFG_STOP_DELAY-WFG_START_DELAY-POWER_DELAY);
          decshaped_pulse("offC27", pwCab180, zero, 0.0, 0.0);
          txphase(zero);
          delay(tau1 - pwCab180/2.0 - WFG_STOP_DELAY); 
       }
       else
       {
          delay(2.0*tau1);
          decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0);
          txphase(zero);
          delay(2.0*tau1);
       }
       rgpulse(pw, zero, 0.0, 0.0);
       delay(bigTCO - gt6 - POWER_DELAY - 1.0e-3);
       if (gt6 > 0.2e-6)
          zgradpulse(gzlvl6, gt6);
       decpwrf(dpwrfC);
       delay(1.0e-3);
       decrgpulse(pwC, zero, 0.0, 0.0);
    }
    else
    {
       decrgpulse(pwC, t3, 0.0, 0.0);
       decpwrf(dfCa180);
       sim3shaped_pulse("","offC17","",0.0e-6,pwCa180,0.0e-6,zero,zero,zero,2.0e-6,0.0);
       delay(2.0e-6);
       if(gt6 > 0.2e-6)  
          zgradpulse(gzlvl6, gt6);

       decpwrf(dfCO180);
       delay(bigTCO - 2.0*tau1 - maxcan - gt6 - 2.0*POWER_DELAY - 4.0e-6);

       decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0);
 
       delay(bigTCO - gt6 - maxcan - 2.0*POWER_DELAY - 1.0e-3);
       if (gt6 > 0.2e-6)
          zgradpulse(gzlvl6, gt6);
       decpwrf(dfCa180);
       delay(1.0e-3);
       sim3shaped_pulse("","offC17","",2.0*pw,pwCa180,2.0*pwN,zero,zero,zero,0.0,0.0);
     
       decpwrf(dpwrfC);
       delay(2.0*tau1);
       decrgpulse(pwC, t1, 2.0e-6, 0.0);
    }
    delay(2.0e-6);
    zgradpulse(gzlvl7, gt7);
    decpwrf(dfCO180);
    dec2phase(t2);
    delay(200.0e-6);

    dec2rgpulse(pwN, t2, 0.0, 0.0);

    delay(bigTN - tau2);
    dec2phase(t4);

    sim3shaped_pulse("","offC8","",(double)0.0,pwCO180,2.0*pwN,zero,zero,t4,0.0,0.0);

    decpwrf(dfCa180);
    delay(bigTN - taub - WFG_STOP_DELAY - POWER_DELAY);
    rgpulse(2.0*pw, zero, 0.0, 0.0);

    delay(taub - 2.0*pw - gt1 - 1.0e-3 - 6.0*GRADIENT_DELAY);
    if (mag_flg[A] == 'y')
    {
        magradpulse(gzcal*gzlvl1, gt1);
    }
    else
    {
        zgradpulse(gzlvl1, gt1);
        delay(4.0*GRADIENT_DELAY);
    }
    dec2phase(t5);
    delay(1.0e-3);
    decshaped_pulse("offC17", pwCa180, zero, 0.0, 0.0);
    delay(tau2);

    sim3pulse(pw,(double)0.0, pwN, zero,zero, t5, 0.0, 0.0);
    dec2phase(zero);
    delay(2.0e-6);
    zgradpulse(0.8*gzlvl5, gt5);
    delay(taua - gt5 - 2.0e-6);
    sim3pulse(2.0*pw,(double)0.0, 2.0*pwN, zero,zero, zero, 0.0, 0.0);
    delay(taua - gt5 - 500.0e-6);
    zgradpulse(0.8*gzlvl5, gt5);
    txphase(one);
    decphase(one);
    delay(500.0e-6);

    sim3pulse(pw,(double)0.0, pwN, one,zero, one, 0.0, 0.0);
    
    delay(2.0e-6);
    txphase(zero);
    dec2phase(zero);
    zgradpulse(gzlvl5, gt5);
    delay(taua - gt5 - 2.0e-6);
    sim3pulse(2.0*pw,(double)0.0, 2.0*pwN, zero,zero, zero, 0.0, 0.0);
  
    delay(taua - gt5 - 2.0*POWER_DELAY - 500.0e-6);
    zgradpulse(gzlvl5, gt5);
    decpower(dpwr);
    dec2power(dpwr2);
    delay(500.0e-6);

    rgpulse(pw, zero, 0.0, 0.0);

    delay(1.0e-4 +gstab + gt1/10.0 - 0.5*pw + 6.0*GRADIENT_DELAY);
    rgpulse(2.0*pw, zero, 0.0, 0.0);
    delay(2.0e-6);
    if(mag_flg[A] == 'y')
    {
       magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);
    }
    else
    {
       zgradpulse(icosel*gzlvl2, gt1/10.0);  
       delay(4.0*GRADIENT_DELAY);
    }           
    delay(1.0e-4  - 2.0e-6);               
statusdelay(C,1.0e-4);
    setreceiver(t10);
}
Exemple #10
0
void pulsesequence()
{
/* DECLARE VARIABLES */

 char       autocal[MAXSTR],  /* auto-calibration flag */
            fsat[MAXSTR],
            fscuba[MAXSTR],
            f1180[MAXSTR],    /* Flag to start t1 @ halfdwell         */
            f2180[MAXSTR],    /* Flag to start t2 @ halfdwell         */
            shib[MAXSTR],     /* iburp for inversion during first inept     */
            Hshp[MAXSTR],     /* proton inversion during chirp        */
            ddseq[MAXSTR],
            shreb[MAXSTR],    /* reburb hard during t2                */
            co_shp[MAXSTR],   /* shape of co 180 at 176 ppm */
            CT_flg[MAXSTR],
            codecseq[MAXSTR],
            c180_flg[MAXSTR],

            n_shift[MAXSTR],
            shibca[MAXSTR],
            shibcai[MAXSTR];

 int         phase, phase2, t2_counter, ni2, ni,
             t1_counter;   /* used for states tppi in t2,t1        */ 

 double      tau1,         /*  t1 delay */
             tau2,         /*  t2 delay */
             taua,         /*  ~ 1/4JCH =  1.7 ms; first inept */
             mix,	   /* noesy mixing time */
             TC,           /* Variable CT period during t1 1/2JCC */
             TC2,          /* Variable CT period during t3  1/2JCC */
             pwc,          /* 90 c pulse at dhpwr            */
             tsatpwr,      /* low level 1H trans.power for presat  */
             dhpwr,        /* power level for high power 13C pulses on dec1 */
             sw1,          /* sweep width in f1                    */ 
             sw2,          /* sweep width in f2                    */ 
             pwC,pwClvl,compC,pwN,pwNlvl,ppm,ofs,bw,  /*used by Pbox */
             d_ib,
             pwib,

             pwhshp,

             pwd1,        /* 2H flip back pulses   */

             d_reb,
             pwreb,

             ph_reb,
             ph_reb1,    /* only used if CT_flg=='y' and n_shift=='y'  */

             pwco180,

             dhpwr2,
             pwn,

             d_co180,

             pwcodec,    /* carbon pw90 for seduce decoupling */
             dpwrsed,
             dressed,

             d_ibca,     /* power level for selective 13Ca pulse during CT-t2 */
             pwibca,     /* selective 13Ca pulse width  */

             gt1,
             gt2,
             gt3,
             gt4,
             gt5,
             gt6,
             gt7,
             gt8,
             gt9,
             gt10,
             gt11,
             gt12,
             gstab,
             gzlvl1,
             gzlvl2,
             gzlvl3,
             gzlvl4,
             gzlvl5,
             gzlvl6,
             gzlvl7,
             gzlvl8,
             gzlvl9,
             gzlvl10,
             gzlvl11,
             gzlvl12;

/*  variables commented out are already defined by the system      */


/* LOAD VARIABLES */

  getstr("autocal",autocal);
  getstr("fsat",fsat);
  getstr("f1180",f1180);
  getstr("f2180",f2180);
  getstr("fscuba",fscuba);
  getstr("ddseq",ddseq);
  getstr("n_shift",n_shift); 
  getstr("Hshp",Hshp);
  getstr("CT_flg",CT_flg);
  getstr("c180_flg",c180_flg);

  compC = getval("compC"); pwN=getval("pwN"); pwNlvl=getval("pwNlvl");
  pwC = getval("pwC"); pwClvl=getval("pwClvl");
  
  pwhshp = getval("pwhshp");
  taua   = getval("taua"); 
  mix   = getval("mix"); 
  TC = getval("TC");
  pwc = getval("pwc");
  tpwr = getval("tpwr");
  tsatpwr = getval("tsatpwr");
  dhpwr = getval("dhpwr");
  dpwr = getval("dpwr");
  phase = (int) ( getval("phase") + 0.5);
  phase2 = (int) ( getval("phase2") + 0.5);
  sw1 = getval("sw1");
  sw2 = getval("sw2");
  ni2 = getval("ni2");
  ni  = getval("ni");

  pwd1 = getval("pwd1");

  ph_reb = getval("ph_reb");
  ph_reb1 = getval("ph_reb1");

  TC2 = getval("TC2");

  dhpwr2 = getval("dhpwr2");
  pwn = getval("pwn");

  setautocal();

  if(autocal[0]=='n')
  {     
    getstr("shreb",shreb);
    getstr("shib",shib);
    getstr("shibca",shibca);
    getstr("shibcai",shibcai);
    getstr("co_shp",co_shp);
    getstr("codecseq",codecseq);

    d_reb = getval("d_reb");
    pwreb = getval("pwreb");
    d_ib = getval("d_ib");
    pwib = getval("pwib");
    d_ibca = getval("d_ibca");
    pwibca = getval("pwibca"); 
    d_co180 = getval("d_co180");
    pwco180 = getval("pwco180");
    pwcodec = getval("pwcodec");
    dpwrsed = getval("dpwrsed");
    dressed = getval("dressed");
  }
  else
  {    
  /*strcpy(Hshp,"hard");  former declarations using TNMR.h syntax
    strcpy(shreb,"Preb_5p");
    strcpy(shib,"Pib_1p5");
    strcpy(shibca,"Pib_35p");
    strcpy(shibcai,"Pib_35pi");    
    strcpy(co_shp,"Psed_156p");
    strcpy(codecseq,"Pdec_156p");*/

    strcpy(Hshp,"hard");
    strcpy(shreb,"Preb_5p");
    strcpy(shib,"Pib_1p5");
    strcpy(shibca,"Pib_35p");
    strcpy(shibcai,"Pib_35pi");    
    strcpy(co_shp,"Psed_156p");
    strcpy(codecseq,"Pdec_156p");
    if (FIRST_FID)
    {
      ppm = getval("dfrq");

/*       These are former declarations (at top) using TNMR.h syntax                     */
/*REB180   "reburp 110p 5p"*/             /* RE-BURP 180 on Cab at 24.6 ppm, 5 ppm away */
/*IB180    "iburp2 24.4p 1.5p"*/          /* I-BURP 180 on  Me at 21.1 ppm, 1.5 ppm away */
/*IBCA     "iburp2 24.4p 35p"*/           /* I-BURP 180 on Cab at 54.6 ppm, 35 ppm away */
/*IBCAI    "iburp2 24.4p 35p"*/           /* I-BURP 180 on Cab at 54.6 ppm, 35 ppm away */
/*CO180    "seduce 30p 156p"*/            /* SEDUCE 180 on C' at 175.6 ppm 156 ppm away */
/*CODEC    "WURST2 20p/4m 156p"*/  /* WURST2 decoupling on C' at 175.6 ppm 156 ppm away */
/*REB180ps "-stepsize 0.5 -attn i"*/                     /* seduce 180 shape parameters */
/*CODECps  "-dres 1.0 -maxincr 20.0 -attn i"*/
    /*co180 = pbox(co_shp, CO180, REB180ps, dfrq, compC*pwc, dhpwr);*/
    /*ibcai = pbox(shibcai, IBCAI, REB180ps, dfrq, compC*pwc, dhpwr);*/      
    /*ibca = pbox(shibca, IBCA, REB180ps, dfrq, compC*pwc, dhpwr);*/
    /*ib180 = pbox(shib, IB180, REB180ps, dfrq, compC*pwc, dhpwr);*/          
    /*reb = pbox(shreb, REB180, REB180ps, dfrq, compC*pwc, dhpwr);*/
    /*COdec = pbox(codecseq, CODEC, CODECps, dfrq, compC*pwc, dhpwr);*/

      bw = 110.0*ppm; ofs = 5.0*ppm;
      Preb_5p = pbox_Rsh("Preb_5p", "reburp", bw , ofs, compC*pwC, pwClvl);
      bw = 24.4*ppm; ofs = 1.5*ppm;
      Pib_1p5 = pbox_Rsh("Pib_1p5", "iburp2", bw , ofs, compC*pwC, pwClvl);
      bw = 24.4*ppm; ofs = 35*ppm;
      Pib_35p = pbox_Rsh("Pib_35p", "iburp2", bw , ofs, compC*pwC, pwClvl);
      bw = 24.4*ppm; ofs = 35*ppm;
      Pib_35pi = pbox_Rsh("Pib_35pi", "iburp2", bw , ofs, compC*pwC, pwClvl);
      bw = 30.0*ppm; ofs = 156*ppm;
      Psed_156p = pbox_Rsh("Psed_156p", "seduce", bw , ofs, compC*pwC, pwClvl);
      bw = 20.0*ppm; ofs = 156*ppm;
      Pdec_156p = pbox_Dsh("Pdec_156p", "WURST2", bw , ofs, compC*pwC, pwClvl);


      ofs_check(H1ofs, C13ofs, N15ofs, H2ofs);
    }
    d_reb = Preb_5p.pwr;        pwreb = Preb_5p.pw;
    d_ib = Pib_1p5.pwr;         pwib = Pib_1p5.pw;
    d_ibca = Pib_35p.pwr;       pwibca = Pib_35p.pw;       
    d_co180 = Psed_156p.pwr;    pwco180 = Psed_156p.pw;  
    dpwrsed = Pdec_156p.pwr;    pwcodec = 1.0/Pdec_156p.dmf;  dressed = Pdec_156p.dres;

    pwc=pwC; dhpwr=pwClvl; pwn=pwN; dhpwr2=pwNlvl; pwhshp=2.0*pw;
    pwd1=1/dmf3; pwhshp=2.0*pw;
  }   
   
  gt1 = getval("gt1");
  gt2 = getval("gt2");
  gt3 = getval("gt3");
  gt4 = getval("gt4");
  gt5 = getval("gt5");
  gt6 = getval("gt6");
  gt7 = getval("gt7");
  gt8 = getval("gt8");
  gt9 = getval("gt9");
  gt10 = getval("gt10");
  gt11 = getval("gt11");
  gt12 = getval("gt12");

  gstab  = getval("gstab");
  gzlvl1 = getval("gzlvl1");
  gzlvl2 = getval("gzlvl2");
  gzlvl3 = getval("gzlvl3");
  gzlvl4 = getval("gzlvl4");
  gzlvl5 = getval("gzlvl5");
  gzlvl6 = getval("gzlvl6");
  gzlvl7 = getval("gzlvl7");
  gzlvl8 = getval("gzlvl8");
  gzlvl9 = getval("gzlvl9");
  gzlvl10 = getval("gzlvl10");
  gzlvl11 = getval("gzlvl11");
  gzlvl12 = getval("gzlvl12");

/* LOAD PHASE TABLE */

  settable(t1,4,phi1);
  settable(t2,8,phi2);
  settable(t7,2,phi7);
  settable(t8,2,phi8);
  settable(t9,8,rec);

/* CHECK VALIDITY OF PARAMETER RANGES */

   if(TC/2.0 - 0.5*(ni-1)*1/(sw1) - POWER_DELAY - 4.0e-6 
         - WFG3_START_DELAY - pwco180
         - WFG3_STOP_DELAY - pwd1 
         - gt4 - gstab -2.0e-6 - POWER_DELAY
         - 4.0e-6 - WFG_START_DELAY < 0.2e-6)
    {
        printf(" ni is too big\n");
        psg_abort(1);
    }

  if(CT_flg[A] == 'y' && n_shift[A] == 'n') {

   if(TC2/2.0 - 0.5*(ni2-1)*1/(sw2) - POWER_DELAY - 4.0e-6 
         - WFG3_START_DELAY - pwco180
         - WFG3_STOP_DELAY - pwd1 
         - gt10 - gstab -2.0e-6 - POWER_DELAY
         - 4.0e-6 - WFG_START_DELAY < 0.2e-6)
    {
        printf(" ni2 is too big\n");
        psg_abort(1);
    }

   }

  if(CT_flg[A] == 'y' && n_shift[A] == 'y') {

   if(TC2/2.0 - 0.5*(ni2-1)/sw2 - POWER_DELAY 
         - 4.0e-6 - WFG3_START_DELAY - pwco180
         - WFG3_STOP_DELAY - 2.0e-6 - POWER_DELAY - WFG_START_DELAY
         - 4.0e-6 - pwibca - WFG_STOP_DELAY - pwd1 
         - gt10 - gstab -2.0e-6 - POWER_DELAY
         - 4.0e-6 - WFG3_START_DELAY < 0.2e-6)
    {
        printf(" ni2 is too big\n");
        psg_abort(1);
    }

   }

    if((dm[A] == 'y' || dm[B] == 'y' ))
    {
        printf("incorrect dec1 decoupler flags!  ");
        psg_abort(1);
    }

    if((dm2[A] == 'y' || dm2[B] == 'y'))
    {
        printf("incorrect dec2 decoupler flags!  ");
        psg_abort(1);
    }

    if((dm3[A] == 'y' || dm3[B] == 'y' || dm3[C] == 'y'))
    {
        printf("incorrect dec3 decoupler flags!  ");
        psg_abort(1);
    }

    if( tsatpwr > 6 )
    {
        printf("TSATPWR too large !!!  ");
        psg_abort(1);
    }

    if( dpwr > 48 )
    {
        printf("don't fry the probe, DPWR too large!  ");
        psg_abort(1);
    }

    if( d_ib > 54 )
    {
        printf("don't fry the probe, d_ib too large!  ");
        psg_abort(1);
    }

    if( dpwr2 > 49 )
    {
        printf("don't fry the probe, DPWR2 too large!  ");
        psg_abort(1);
    }

    if( dpwr3 > 51 )
    {
        printf("don't fry the probe, DPWR3 too large!  ");
        psg_abort(1);
    }

    if( dhpwr > 63 )
    {
        printf("don't fry the probe, DHPWR too large!  ");
        psg_abort(1);
    }

    if( pw > 200.0e-6 )
    {
        printf("dont fry the probe, pw too high ! ");
        psg_abort(1);
    } 

    if( pwd1 < 100.0e-6 && pwd1 != 0.0)
    {
        printf("dont fry the probe, pwd1 too short and dpwr3 too high! ");
        psg_abort(1);
    } 

    if(d_co180 > 50)
    {
        printf("dont fry the probe, d_co180 is too high\n ");
        psg_abort(1);
    } 

    if(((pwco180 > 250e-6) || (pwco180 < 200e-6)) && (autocal[A] == 'n'))
     {
        printf("pwco180 is misset < 250 us > 200 us\n");
        psg_abort(1);
     }

    if(dpwrsed > 45) 
     {
        printf("dpwrsed is misset < 46\n");
        psg_abort(1);
     }

    if(gt1 > 15e-3 || gt2 > 15e-3 || gt3 > 15e-3 || 
        gt4 > 15e-3 || gt5 > 15e-3 || gt6 > 15e-3 ||
        gt7 > 15e-3 || gt8 > 15e-3 || gt9 > 15e-3 || 
        gt10 > 15e-3 || gt11 > 15e-3 || gt12 > 15e-3) 
    {
        printf("gradients on for too long. Must be < 15e-3 \n");
        psg_abort(1);
    }

/*  Phase incrementation for hypercomplex 2D data */

    if (phase2 == 2) {
      tsadd(t2,1,4);  
    }

    if (phase == 2) 
      tsadd(t1,1,4);

/*  Set up f2180  tau2 = t2               */
   
    tau2 = d3;

    if(CT_flg[A] == 'y') {

    if(f2180[A] == 'y') {
        tau2 += ( 1.0 / (2.0*sw2) );
    }

    }

    if(CT_flg[A] == 'n' && n_shift[A] == 'n') {

         if(f2180[A] == 'y') {
            tau2 += ( 1.0 / (2.0*sw2) - 4.0/PI*pwc - POWER_DELAY
                      - PRG_START_DELAY - 4.0*pw - 4.0e-6 - 2.0*pwn
                      - PRG_STOP_DELAY - POWER_DELAY - 4.0e-6);

            if(tau2 < 0.0 && ix == 1) 
               printf("tau2 start2 negative; decrease sw2\n");
          }

         if(f2180[A] == 'n') {
            tau2 = ( tau2 - 4.0/PI*pwc - POWER_DELAY
                      - PRG_START_DELAY - 4.0*pw - 4.0e-6 - 2.0*pwn
                      - PRG_STOP_DELAY - POWER_DELAY - 4.0e-6);
         }

     } 

    if(CT_flg[A] == 'n' && n_shift[A] == 'y') {

         if(f2180[A] == 'y') {
            tau2 += ( 1.0 / (2.0*sw2) - 4.0/PI*pwn - POWER_DELAY
                      - PRG_START_DELAY - 4.0*pw - 4.0e-6 
                      - PRG_STOP_DELAY - POWER_DELAY - 4.0e-6);

            if(tau2 < 0.0 && ix == 1) 
               printf("tau2 start2 negative; decrease sw2\n");
          }

         if(f2180[A] == 'n') {
            tau2 = ( tau2 - 4.0/PI*pwn - POWER_DELAY
                      - PRG_START_DELAY - 4.0*pw - 4.0e-6
                      - PRG_STOP_DELAY - POWER_DELAY - 4.0e-6);
         }

     } 

    if(tau2 < 0.4e-6) tau2 = 0.4e-6;
    tau2 = tau2/2.0;

/*  Set up f1180  tau1 = t1               */
   
    tau1 = d2;
    if(f1180[A] == 'y') {
        tau1 += ( 1.0 / (2.0*sw1) );
    }
    if(tau1 < 0.4e-6) tau1 = 0.4e-6;
    tau1 = tau1/2.0;

/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2 ;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) {
      tsadd(t1,2,4);     
      tsadd(t9,2,4);     
    }

   if( ix == 1) d3_init = d3 ;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) {
      tsadd(t2,2,4);     
      tsadd(t9,2,4);    
    }

/* BEGIN ACTUAL PULSE SEQUENCE */

status(A);
   obspower(tsatpwr);     /* Set transmitter power for 1H presaturation */
   decpower(dhpwr);       /* Set Dec1 power for hard 13C pulses         */
   dec2power(dhpwr2);    /* Set Dec2 power for hard 15N pulses         */
   dec3power(dpwr3);     /* Set Dec3 power for 2H pulses        */

/* Presaturation Period */


   if (fsat[0] == 'y')
   {
        delay(2.0e-5);
        rgpulse(d1,zero,2.0e-6,2.0e-6); /* presat */
        obspower(tpwr);    /* Set transmitter power for hard 1H pulses */
        delay(2.0e-5);
        if(fscuba[0] == 'y')
        {
                delay(2.2e-2);
                rgpulse(pw,zero,2.0e-6,0.0);
                rgpulse(2*pw,one,2.0e-6,0.0);
                rgpulse(pw,zero,2.0e-6,0.0);
                delay(2.2e-2);
        }
   }
   else
   {
    delay(d1);
   }

   obspower(tpwr);          /* Set transmitter power for hard 1H pulses */
   txphase(zero);
   dec2phase(zero);
   decphase(zero);
   delay(1.0e-5);

/* Begin Pulses */

status(B);

   rcvroff();
   lk_hold();
   delay(20.0e-6);

/* first ensure that magnetization does infact start on H and not C */

   decrgpulse(pwc,zero,2.0e-6,2.0e-6);

   delay(2.0e-6);
   zgradpulse(gzlvl1,gt1);
   delay(gstab);

   decpower(d_ib);			/* set power for chirp during inept */
   delay(4e-6);

/* this is the real start */

   rgpulse(pw,zero,0.0,0.0);                    /* 90 deg 1H pulse */

   delay(2.0e-6);
   zgradpulse(gzlvl2,gt2);
   delay(2.0e-6);

   delay(taua - gt2 - 4.0e-6 - WFG2_START_DELAY);   /* taua <= 1/4JCH */                          

   simshaped_pulse(Hshp,shib,pwhshp,pwib,zero,zero,0.0,0.0);
   decphase(zero);

   txphase(one); decphase(t1);
   decpower(dhpwr);

   delay(2.0e-6);
   zgradpulse(gzlvl2,gt2);
   delay(2.0e-6);

   delay(taua - gt2 - 4.0e-6 - WFG2_STOP_DELAY - POWER_DELAY); 

   rgpulse(pw,one,0.0,0.0);
   txphase(zero);

   delay(2.0e-6);
   zgradpulse(gzlvl3,gt3);
   delay(gstab);

   decrgpulse(pwc,t1,0.0,0.0);
   decphase(zero);

   delay(tau1);

   decpower(d_co180);
   sim3shaped_pulse(Hshp,co_shp,"hard",pwhshp,pwco180,2.0*pwn,zero,zero,zero,4.0e-6,0.0);

   delay(TC/2.0 - tau1 - POWER_DELAY - 4.0e-6 - WFG3_START_DELAY - pwco180
         - WFG3_STOP_DELAY - pwd1 
         - gt4 - gstab -2.0e-6 - POWER_DELAY
         - 4.0e-6 - WFG_START_DELAY);

   dec3rgpulse(pwd1,zero,0.0,0.0);

   delay(tau1);

   delay(2.0e-6);
   zgradpulse(gzlvl4,gt4);
   delay(gstab);

   initval(1.0,v3);
   decstepsize(ph_reb);
   dcplrphase(v3);

   decpower(d_reb);

   decshaped_pulse(shreb,pwreb,zero,4.0e-6,0.0);
   dcplrphase(zero);

   decphase(zero); decpower(dhpwr);
  
   delay(2.0e-6);
   zgradpulse(gzlvl4,gt4);
   delay(gstab);

   delay(TC/2.0 - tau1 - WFG_STOP_DELAY - POWER_DELAY
         - gt4 - gstab -2.0e-6);

   decrgpulse(pwc,zero,0.0,0.0);

   dec3rgpulse(pwd1,two,4.0e-6,0.0);


   delay(2.0e-6);
   zgradpulse(gzlvl5,gt5);
   delay(gstab);

   rgpulse(pw,zero,0.0,0.0);

   delay(2.0e-6);
   zgradpulse(gzlvl6,gt6);
   delay(gstab);

   decpower(d_ib);
   delay(taua - gt6 - 4.0e-6 - WFG2_START_DELAY - POWER_DELAY);

   simshaped_pulse(Hshp,shib,pwhshp,pwib,zero,zero,0.0,0.0);
   decphase(zero);

   delay(2.0e-6);
   zgradpulse(gzlvl6,gt6);
   delay(gstab);


   decpower(dhpwr);
   txphase(one);
   delay(taua - gt6 - gstab -2.0e-6 - POWER_DELAY - WFG2_STOP_DELAY);

   rgpulse(pw,one,0.0,0.0);
   txphase(zero);

   delay(mix - gt7 - 352.0e-6);

   decrgpulse(pwc,zero,0.0,0.0);

   delay(2.0e-6);
   zgradpulse(gzlvl7,gt7);
   delay(gstab);

   decpower(d_ib); /* set power level for iburp */

   rgpulse(pw,zero,0.0,0.0);                    /* 90 deg 1H pulse */

   delay(2.0e-6);
   zgradpulse(gzlvl8,gt8);
   delay(2.0e-6);

   if(n_shift[A] == 'n') {

   delay(taua - gt8 - 4.0e-6 - WFG2_START_DELAY);   /* taua <= 1/4JCH */                          
   simshaped_pulse(Hshp,shib,pwhshp,pwib,zero,zero,0.0,0.0);
   decphase(zero);

   }

   else {
 delay(taua - gt8 - 4.0e-6 - WFG3_START_DELAY);                 
 sim3shaped_pulse(Hshp,shib,"hard",pwhshp,pwib,2.0*pwn,zero,zero,zero,0.0,0.0);
    }


   txphase(one); decphase(t2);
   decpower(dhpwr);

   delay(2.0e-6);
   zgradpulse(gzlvl8,gt8);
   delay(2.0e-6);

   if(n_shift[A] == 'n') 
      delay(taua - gt8 - 4.0e-6 - WFG2_STOP_DELAY - POWER_DELAY); 
   else
      delay(taua - gt8 - 4.0e-6 - WFG3_STOP_DELAY - POWER_DELAY); 

   rgpulse(pw,one,0.0,0.0);
   txphase(zero);

   delay(2.0e-6);
   zgradpulse(gzlvl9,gt9);
   delay(gstab);

  if(CT_flg[A] == 'y' && n_shift[A] == 'n') {

   decrgpulse(pwc,t2,0.0,0.0);
   decphase(zero);

   delay(tau2);

   decpower(d_co180);
   sim3shaped_pulse(Hshp,co_shp,"hard",pwhshp,pwco180,2.0*pwn,zero,zero,zero,4.0e-6,0.0);

   delay(TC2/2.0 - tau2 - POWER_DELAY - 4.0e-6 - WFG3_START_DELAY - pwco180
         - WFG3_STOP_DELAY - pwd1 
         - gt10 - gstab -2.0e-6 - POWER_DELAY
         - 4.0e-6 - WFG_START_DELAY);

   dec3rgpulse(pwd1,zero,0.0,0.0);

   delay(tau2);

   delay(2.0e-6);
   zgradpulse(gzlvl10,gt10);
   delay(gstab);

   initval(1.0,v4);
   decstepsize(ph_reb);
   dcplrphase(v4);

   decpower(d_reb);

   decshaped_pulse(shreb,pwreb,zero,4.0e-6,0.0);
   dcplrphase(zero);

   decphase(zero); decpower(dhpwr);
   
   delay(2.0e-6);
   zgradpulse(gzlvl10,gt10);
   delay(gstab);

   delay(TC2/2.0 - tau2 - WFG_STOP_DELAY - POWER_DELAY 
         - gt10 - gstab -2.0e-6); 

   decrgpulse(pwc,zero,0.0,0.0);

   dec3rgpulse(pwd1,two,4.0e-6,0.0);

   }

  if(CT_flg[A] == 'y' && n_shift[A] == 'y') {

   dec2phase(t2); delay(2.0e-6);

   dec2rgpulse((pwn-pwc)/2.0,t2,0.0,0.0);
   sim3pulse(0.0e-6,pwc,pwc,zero,t2,t2,0.0,0.0);
   dec2rgpulse((pwn-pwc)/2.0,t2,0.0,0.0);

   decphase(zero);

   delay(tau2);

   decphase(zero);
   decpower(d_co180);
   sim3shaped_pulse(Hshp,co_shp,"hard",pwhshp,pwco180,0.0e-6,zero,zero,zero,4.0e-6,2.0e-6);

   decpower(d_ibca);
   decshaped_pulse(shibca,pwibca,zero,4.0e-6,0.0);
   decphase(zero);

   delay(TC2/2.0 - tau2 - POWER_DELAY - 4.0e-6 - WFG3_START_DELAY - pwco180
         - WFG3_STOP_DELAY - 2.0e-6 - POWER_DELAY - WFG_START_DELAY
         - 4.0e-6 - pwibca - WFG_STOP_DELAY - pwd1 
         - gt10 - gstab -2.0e-6 - POWER_DELAY
         - 4.0e-6 - WFG3_START_DELAY);

   dec3rgpulse(pwd1,zero,0.0,0.0);

   delay(tau2);

   delay(2.0e-6);
   zgradpulse(gzlvl10,gt10);
   delay(gstab);

   initval(1.0,v4);
   decstepsize(ph_reb1);
   dcplrphase(v4);

   decpower(d_reb);

   sim3shaped_pulse("hard",shreb,"hard",0.0e-6,pwreb,2.0*pwn,zero,zero,zero,4.0e-6,0.0);
   dcplrphase(zero);

   decphase(t7); decpower(d_ibca);
   decshaped_pulse(shibcai,pwibca,t7,4.0e-6,0.0);
   decpower(dhpwr); decphase(zero);
   
   delay(2.0e-6);
   zgradpulse(gzlvl10,gt10);
   delay(gstab);

   delay(TC2/2.0 - tau2 - WFG3_STOP_DELAY - POWER_DELAY 
         - 4.0e-6 - WFG_START_DELAY - pwibca - WFG_STOP_DELAY 
         - POWER_DELAY
         - gt10 - gstab -2.0e-6); 

   dec2rgpulse((pwn-pwc)/2.0,zero,0.0,0.0);
   sim3pulse(0.0e-6,pwc,pwc,zero,zero,zero,0.0,0.0);
   dec2rgpulse((pwn-pwc)/2.0,zero,0.0,0.0);

   dec3rgpulse(pwd1,two,4.0e-6,0.0);

   }

   if(CT_flg[A] == 'n' && n_shift[A] == 'n') {

      txphase(one);
      decrgpulse(pwc,t2,0.0,0.0);

      if(c180_flg[A] == 'n')
    {

      decphase(zero);

      /* seduce on */
      decpower(dpwrsed);
      decprgon(codecseq,pwcodec,dressed);
      decon();
      /* seduce on */

      delay(tau2);

      rgpulse(pw,one,0.0,0.0);
      rgpulse(2.0*pw,zero,2.0e-6,0.0);
      rgpulse(pw,one,2.0e-6,0.0);

      dec2rgpulse(2.0*pwn,zero,0.0,0.0);

      delay(tau2); 

      /* seduce off */
      decoff();
      decprgoff();
      decpower(dhpwr);
      /* seduce off */

    }

      else
         decrgpulse(2.0*pwc,zero,4.0e-6,0.0);

      decrgpulse(pwc,zero,4.0e-6,0.0);

   }

   if(CT_flg[A] == 'n' && n_shift[A] == 'y') {

      txphase(one); dec2phase(t2);

      dec2rgpulse((PI-2.0)/PI*(pwn-pwc),t2,2.0e-6,0.0);
      sim3pulse(0.0e-6,pwc,pwc,zero,t2,t2,0.0,0.0);
      dec2rgpulse((2.0/PI)*(pwn-pwc),t2,0.0,0.0);

      if(c180_flg[A] == 'n')
    {

      decphase(zero);

      /* seduce on */
      decpower(dpwrsed);
      decprgon(codecseq,pwcodec,dressed);
      decon();
      /* seduce on */

      delay(tau2);

      rgpulse(pw,one,0.0,0.0);
      rgpulse(2.0*pw,zero,2.0e-6,0.0);
      rgpulse(pw,one,2.0e-6,0.0);

      delay(tau2); 

      /* seduce off */
      decoff();
      decprgoff();      /* note that ca-n evolves ; keep t2,max <= 9.5ms */
      decpower(dhpwr);
      /* seduce off */

    }

      else
         sim3pulse(0.0,2.0*pwc,2.0*pwn,zero,zero,zero,4.0e-6,0.0);

      dec2rgpulse((2.0/PI)*(pwn-pwc),zero,4.0e-6,0.0);
      sim3pulse(0.0e-6,pwc,pwc,zero,zero,zero,0.0,0.0);
      dec2rgpulse((PI-2.0)/PI*(pwn-pwc),zero,0.0,0.0);

   }

   delay(2.0e-6);
   zgradpulse(gzlvl11,gt11);
   delay(gstab);

   lk_sample();

   rgpulse(pw,t8,4.0e-6,0.0);                    /* 90 deg 1H pulse */

   delay(2.0e-6);
   zgradpulse(gzlvl12,gt12);
   delay(2.0e-6);

   decpower(d_ib);

   if(n_shift[A] == 'n') {

   delay(taua - gt12 - 4.0e-6 - WFG2_START_DELAY - POWER_DELAY);
   simshaped_pulse(Hshp,shib,pwhshp,pwib,t8,zero,0.0,0.0);
   decphase(zero);
   }

   else {
 delay(taua - gt12 - 4.0e-6 - WFG3_START_DELAY - POWER_DELAY);                 
 sim3shaped_pulse(Hshp,shib,"hard",pwhshp,pwib,2.0*pwn,t8,zero,zero,0.0,0.0);
    }

   delay(2.0e-6);
   zgradpulse(gzlvl12,gt12);
   delay(2.0e-6);

   if(n_shift[A] == 'n')
     delay(taua - gt12 - 4.0e-6 - WFG2_STOP_DELAY - 2.0*POWER_DELAY);
   else
     delay(taua - gt12 - 4.0e-6 - WFG3_STOP_DELAY - 2.0*POWER_DELAY);

   decpower(dpwr);  /* Set power for decoupling */
   dec2power(dpwr2);  /* Set power for decoupling */

   rgpulse(pw,t8,0.0,rof2);

/* BEGIN ACQUISITION */

status(C);
setreceiver(t9);

}
Exemple #11
0
pulsesequence()
{
   char   
          shname1[MAXSTR],
	  f1180[MAXSTR],
	  f2180[MAXSTR],
          SE_flg[MAXSTR],
          href_flg[MAXSTR];     /*gradient flag */

   int    icosel=1,
          t1_counter,
          t2_counter,
          ni2 = getval("ni2"),
          phase;


   double d2_init=0.0,
          d3_init=0.0,
          pwS1,pwS2,pwS3,pwS4,pwS5,pwS6,
          lambda = getval("lambda"),
          gzlvl1 = getval("gzlvl1"),
          gzlvl2 = getval("gzlvl2"), 
          gzlvl3 = getval("gzlvl3"), 
          gzlvl4 = getval("gzlvl4"), 
          gzlvl5 = getval("gzlvl5"), 
          gzlvl6 = getval("gzlvl6"), 
          gt1 = getval("gt1"),
          gt3 = getval("gt3"),
          gt4 = getval("gt4"),
          gt5 = getval("gt5"),
          gt6 = getval("gt6"),
          gstab = getval("gstab"),
          tpwrsf = getval("tpwrsf"),
          shlvl1,
          shpw1,
          pwClvl = getval("pwClvl"),
          pwNlvl = getval("pwNlvl"),
          pwN = getval("pwN"),
          dpwr2 = getval("dpwr2"),
          d2 = getval("d2"),
          shbw = getval("shbw"),
          shofs = getval("shofs")-4.77,
          timeTN = getval("timeTN"),
          tau1 = getval("tau1"),
          tau2 = getval("tau2"),
          taunh = getval("taunh");

   getstr("shname1", shname1);
   getstr("SE_flg",SE_flg);
   getstr("f1180",f1180);
   getstr("f2180",f2180);
   getstr("href_flg",href_flg);



  phase = (int) (getval("phase") + 0.5);
   
   settable(t1,4,phi1);
   settable(t3,4,phi3);
   settable(t5,4,phi5);
   settable(t10,1,phi10);
   settable(t12,4,phi12);
   settable(t13,4,phi13);

/*   INITIALIZE VARIABLES   */

   shpw1 = pw*8.0;
   shlvl1 = tpwr;


   pwS1 = c13pulsepw("co", "ca", "sinc", 90.0);
   pwS2 = c13pulsepw("co", "ca", "sinc", 180.0);
   pwS3 = c13pulsepw("ca", "co", "square", 180.0);
   pwS4 = h_shapedpw("eburp2",shbw,shofs,zero, 0.0, 0.0);  
   pwS6 = h_shapedpw("reburp",shbw,shofs,zero, 0.0, 0.0);
   pwS5 = h_shapedpw("pc9f",shbw,shofs,zero, 2.0e-6, 0.0);


if (SE_flg[0] == 'y')
{
   if ( ni2*1/(sw2)/2.0 > (timeTN-pwS2*0.5-pwS4))
       { printf(" ni2 is too big. Make ni2 equal to %d or less.\n",
         ((int)((timeTN-pwS2*0.5-pwS4)*2.0*sw2)));    psg_abort(1);}
}
else
{
   if ( ni2*1/(sw2)/2.0 > (timeTN-pwS2*0.5))
       { printf(" ni2 is too big. Make ni2 equal to %d or less.\n",
         ((int)((timeTN-pwS2*0.5)*2.0*sw2)));    psg_abort(1);}
}



  if (phase == 1) ;
  if (phase == 2) tsadd(t1,1,4);

if (SE_flg[0] =='y')
{
  if (phase2 == 2)  {tsadd(t10,2,4); icosel = +1;}
            else                               icosel = -1;
}
else
{
  if (phase2 == 2) {tsadd(t3,1,4);tsadd(t5,1,4);}
}
 

    tau1 = d2;
    if((f1180[A] == 'y') )
        { tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
    tau1 = tau1;

   tau2 = d3;
    if((f2180[A] == 'y') )
        { tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2;

  
    


   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2)
        { tsadd(t1,2,4); tsadd(t12,2,4); tsadd(t13,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2)
        { tsadd(t3,2,4); tsadd(t5,2,4);tsadd(t12,2,4); tsadd(t13,2,4); }



   status(A);
      rcvroff();  

   decpower(pwClvl);
   decoffset(dof);
   dec2power(pwNlvl);
   dec2offset(dof2);
   obspwrf(tpwrsf);
   decpwrf(4095.0);
   obsoffset(tof);
   set_c13offset("co");


     zgradpulse(gzlvl6, gt6);
       delay(1.0e-4);

       delay(d1-g6);
lk_hold();

        h_shapedpulse("pc9f",shbw,shofs,zero, 2.0e-6, 0.0);  

	delay(lambda-pwS5*0.5-pwS6*0.4); 

   	h_sim3shapedpulse("reburp",shbw,shofs,0.0,2.0*pwN, one, zero, zero, 0.0, 0.0);

	delay(lambda-pwS5*0.5-pwS6*0.4);

        h_shapedpulse("pc9f_",shbw,shofs,one, 0.0, 0.0);  


   obspower(shlvl1);
/**************************************************************************/
      dec2rgpulse(pwN,zero,0.0,0.0);

           zgradpulse(gzlvl4, gt3);
           delay(timeTN-pwS2*0.5-gt3);

      sim3_c13pulse("", "co", "ca", "sinc", "", 0.0, 180.0, 2.0*pwN,
                                             zero, zero, zero, 2.0e-6, 2.0e-6);

        if (href_flg[0] == 'y') 
        {
           delay(timeTN-pwS2*0.5-taunh*0.5-shpw1);
           shaped_pulse(shname1,shpw1,two,0.0,0.0);
           zgradpulse(gzlvl4, gt3);
           delay(taunh*0.5-gt3);
     dec2rgpulse(pwN,zero,0.0,0.0);				     
        }
        else
        {
           delay(timeTN-pwS2*0.5-taunh*0.5);
           zgradpulse(gzlvl4, gt3);
           delay(taunh*0.5-gt3);
     dec2rgpulse(pwN,one,0.0,0.0);				     
        }
/**************************************************************************/
/*   xxxxxxxxxxxxxxxxxxxxxx       13CO EVOLUTION        xxxxxxxxxxxxxxxxxx    */
/**************************************************************************/
   
	c13pulse("co", "ca", "sinc", 90.0, t1, 2.0e-6, 0.0);       
        delay(tau1*0.5);
        sim3shaped_pulse(shname1,"","",shpw1,0.0,pwN*2.0,zero,zero,zero,2.0e-6,0.0);
        delay(tau1*0.5);
	c13pulse("co", "ca", "sinc", 180.0, zero, 0.0, 0.0);      
        dec2rgpulse(pwN*2.0,zero,0.0,0.0);				     
        if (pwN*2.0 <shpw1) delay(shpw1-pwN*2.0);
	c13pulse("co", "ca", "sinc", 90.0, zero, 0.0, 0.0);       

/**************************************************************************/

   obspower(shlvl1);
        if (href_flg[0] == 'y') 
         {
          shaped_pulse(shname1,shpw1,two,0.0,0.0);
     dec2rgpulse(pwN,t3,0.0,0.0);
         }
        else 
     dec2rgpulse(pwN,t5,0.0,0.0);

      if (SE_flg[0] == 'y')
      {
        if (href_flg[0] == 'y')
        {
           delay(tau2*0.5);
	c13pulse("ca", "co", "square", 180.0, zero, 0.0, 0.0);       
          delay(taunh*0.5-pwS3);
        shaped_pulse(shname1,shpw1,two,0.0,0.0);
        delay(timeTN-pwS2*0.5-shpw1-taunh*0.5-gt1-1.0e-4);
        }
        else
        {
           delay(tau2*0.5);
        sim_c13pulse(shname1,"ca", "co", "square",shpw1, 180.0, two,zero, 0.0, 0.0);
          if (shpw1 >= pwS3) delay(taunh*0.5-shpw1);
          else  delay(taunh*0.5-pwS3);
        delay(timeTN-pwS2*0.5-taunh*0.5-gt1-1.0e-4);
        }
 
        zgradpulse(-gzlvl1, gt1);
        delay(1.0e-4);

      sim3_c13pulse("", "co", "ca", "sinc", "", 0.0, 180.0, 2.0*pwN,
                                             zero, zero, zero, 2.0e-6, 2.0e-6);
           delay(timeTN-pwS2*0.5-tau2*0.5-pwS4);
        h_shapedpulse("eburp2",shbw,shofs,zero, 2.0e-6, 0.0); 
	dec2rgpulse(pwN, t10, 0.0, 0.0);
      }
      else
      {
        if (href_flg[0] == 'y')
        {
           delay(tau2*0.5);
	c13pulse("ca", "co", "square", 180.0, zero, 0.0, 0.0);       
          delay(taunh*0.5-pwS3);
        shaped_pulse(shname1,shpw1,two,0.0,0.0);
        delay(timeTN-pwS2*0.5-shpw1-taunh*0.5);
        }
        else
        {
           delay(tau2*0.5);
        sim_c13pulse(shname1,"ca", "co", "square",shpw1, 180.0, two,zero, 0.0, 0.0);
         if (shpw1 >= pwS3)   delay(taunh*0.5-shpw1);
         else  delay(taunh*0.5-pwS3);
        delay(timeTN-pwS2*0.5-taunh*0.5);
        }

      sim3_c13pulse("", "co", "ca", "sinc", "", 0.0, 180.0, 2.0*pwN,
                                             zero, zero, zero, 2.0e-6, 2.0e-6);
       delay(timeTN-pwS2*0.5-tau2*0.5);
       dec2rgpulse(pwN, zero, 0.0, 0.0);
      }

/**************************************************************************/
if (SE_flg[0] == 'y')
{
	zgradpulse(gzlvl5, gt5);
	delay(lambda-pwS6*0.4  - gt5);

   	h_sim3shapedpulse("reburp",shbw,shofs,0.0,2.0*pwN, zero, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	delay(lambda-pwS6*0.4  - gt5);

	dec2rgpulse(pwN, one, 0.0, 0.0);
  
        h_shapedpulse("eburp2_",shbw,shofs,one, 0.0, 0.0); 
 

	txphase(zero);
	dec2phase(zero);
	delay(lambda-pwS4*0.5-pwS6*0.4);

   	h_sim3shapedpulse("reburp",shbw,shofs,0.0,2.0*pwN, zero, zero, zero, 0.0, 0.0);

	dec2phase(t10);
	delay(lambda-pwS4*0.5-pwS6*0.4);

 
        h_shapedpulse("eburp2",shbw,shofs,zero, 0.0, 0.0); 


	delay((gt1/10.0) + 1.0e-4 +gstab  + 2.0*GRADIENT_DELAY + POWER_DELAY);

        h_shapedpulse("reburp",shbw,shofs,zero, 0.0, rof2); 
        zgradpulse(icosel*gzlvl2, gt1/10.0);            /* 2.0*GRADIENT_DELAY */
        delay(gstab);
}
else
{
        h_shapedpulse("eburp2",shbw,shofs,zero, 2.0e-6, 0.0);
        zgradpulse(gzlvl5, gt5);
        delay(lambda-pwS6*0.4  - gt5);

        h_sim3shapedpulse("reburp",shbw,shofs,0.0,2.0*pwN, zero, zero, zero, 0.0, 0.0);

        zgradpulse(gzlvl5, gt5);
        delay(lambda-pwS6*0.4  - gt5-POWER_DELAY-1.0e-4);
}

	dec2power(dpwr2);				       /* POWER_DELAY */
lk_sample();
if (SE_flg[0] == 'y')
	setreceiver(t13);
else
	setreceiver(t12);
      rcvron();  
statusdelay(C,1.0e-4 );

}		 
Exemple #12
0
pulsesequence()
{
/* DECLARE VARIABLES */

 char      
	     satmode[MAXSTR],
	     f1180[MAXSTR],
	     abfilter[MAXSTR];	    /* set 'a' for inphase and 'b' for antiphase */


 int	     t1_counter,icosel,first_FID;

 double      /* DELAYS */
             tau1,                      /* t1/2 */
             tauhn,taunco,taucoca,taunca,tauhaca,taucaha,taucacb,

	     /* COUPLINGS */ 
             jhn = getval("jhn"),
             jnco = getval("jnco"),
             jcoca = getval("jcoca"),
             jnca = getval("jnca"),
             jhaca = getval("jhaca"),
             jcaha = getval("jcaha"),
             jcacb = getval("jcacb"),
   
	     /* PULSES */
             pwN = getval("pwN"),               /* PW90 for N-nuc */
             pwC = getval("pwC"),               /* PW90 for C-nuc */
             pwHs = getval("pwHs"),

	     /* POWER LEVELS */
             satpwr = getval("satpwr"),       /* low power level for presat */
             tpwrsf_d = getval("tpwrsf_d"),       /* fine power level for first pwHs */
             tpwrsf_u = getval("tpwrsf_u"),       /* fine power level for second pwHs */
             tpwrs,
             pwClvl = getval("pwClvl"),         /* power level for C hard pulses */ 
             compC = getval("compC"),         /* amplifier compression factor */ 
             compH = getval("compH"),         /* amplifier compression factor */ 
             pwNlvl = getval("pwNlvl"),         /* power level for N hard pulses */
             rf90onco,pw90onco,              /* power level/pw for CO 90 pulses */ 
             rf180onco,pw180onco,            /* power level/pw for CO 180 pulses */
             rf180offca,pw180offca,          /* power level/pw for CA 180 pulses */

             /* CONSTANTS */
             kappa,
   	     lambda = getval("lambda"),         /* scaling factor for JNCa */
 
	     /* GRADIENT DELAYS AND LEVELS */
             gt0 = getval("gt0"),               /* gradient time */
             gt1 = getval("gt1"),               /* gradient time */
             gt3 = getval("gt3"),               /* gradient time */
             gt5 = getval("gt5"),
             gstab = getval("gstab"),
             gzlvl0 = getval("gzlvl0"),         /* level of gradient */
             gzlvl1 = getval("gzlvl1"),
             gzlvl2 = getval("gzlvl2"),
             gzlvl3 = getval("gzlvl3"),
             gzlvl5 = getval("gzlvl5");

/* LOAD VARIABLES */

  getstr("satmode",satmode); 
  getstr("f1180",f1180);
  getstr("abfilter",abfilter);

/* check validity of parameter range */

    if ((dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' ))
	{
	printf("incorrect Dec1 decoupler flags!  ");
	psg_abort(1);
    } 

    if ((dm2[A] == 'y' || dm2[B] == 'y' || dm2[C] == 'y' ))
	{
	printf("incorrect Dec2 decoupler flags!  ");
	psg_abort(1);
    } 

    if ( satpwr > 8 )
    {
	printf("satpwr too large !!!  ");
	psg_abort(1);
    }

    if ( dpwr > 50 )
    {
	printf("don't fry the probe, dpwr too large!  ");
	psg_abort(1);
    }

    if ( dpwr2 > 50 )
    {
	printf("don't fry the probe, dpwr2 too large!  ");
	psg_abort(1);
    }

/* LOAD VARIABLES */

  settable(t1, 1, phi1);
  settable(t2, 1, phi2);
  settable(t3, 1, phi3);
  settable(t4, 2, phi4);
  settable(t6, 4, phi6);
  settable(t7, 2, phi7);

/* INITIALIZE VARIABLES AND POWER LEVELS FOR PULSES */

   tauhn = ((jhn != 0.0) ? 1/(4*(jhn)) : 2.25e-3);
   taunco = ((jnco !=0.0) ? 1/(4*(jnco)) : 16.6e-3);
   taucoca = ((jcoca !=0.0) ? 1/(4*(jcoca)) : 4.5e-3);
   taunca =  ((jnca  !=0.0)  ? 1/(4*(jnca))  : 12e-3);
   tauhaca = ((jhaca !=0.0)  ? 1/(4*(jhaca)) : 12e-3);
   taucaha = ((jcaha !=0.0)  ? 1/(4*(jcaha)) : 12e-3);
   taucacb = ((jcacb !=0.0)  ? 1/(4*(jcacb)) : 12e-3);


       if((getval("arraydim") < 1.5) || (ix==1))
         first_FID = 1;
       else
         first_FID = 0;

    /* 90 degree pulse on CO, null at Ca 118ppm away */

        pw90onco = sqrt(15.0)/(4.0*118.0*dfrq);
        rf90onco = (4095.0*pwC*compC)/pw90onco;
        rf90onco = (int) (rf90onco + 0.5);
        if(rf90onco > 4095.0)
        {
          if(first_FID)
            printf("insufficient power for pw90onco -> rf90onco (%.0f)\n", rf90onco);
          rf90onco = 4095.0;
          pw90onco = pwC;
        }

    /* 180 degree pulse on CO, null at Ca 118ppm away */

        pw180onco = sqrt(3.0)/(2.0*118.0*dfrq);
        rf180onco = (4095.0*pwC*compC*2.0)/pw180onco;
        rf180onco = (int) (rf180onco + 0.5);
        if(rf180onco > 4095.0)
        {
          if(first_FID)
            printf("insufficient power for pw180onco -> rf180onco (%.0f)\n", rf180onco);
          rf180onco = 4095.0;
          pw180onco = pwC*2.0;
        }
        pw180offca = pw180onco;        rf180offca = rf180onco;
      
/* Phase incrementation for hypercomplex data */
    
     kappa=(taunco - tauhn - gt1 - gstab)/(0.5*ni/sw1)-0.001;
      if (kappa > 1.0) 
     {  
	              kappa=1.0-0.01;
     }   

       if ( phase1 == 1) /* Hypercomplex in t2 */
     {
	                icosel = -1;
	                tsadd(t2, 2, 4);
	                tsadd(t3, 2, 4);
     }  
      else icosel = 1;   
      
      if (ix == 1)
      printf("semi constant-time factor %4.6f\n",kappa); 
   
/* calculate modification to phases based on current t1 values
   to achieve States-TPPI acquisition */
 
   if (ix == 1)
      d2_init = d2;
      t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5);

      if (t1_counter %2)  /* STATES-TPPI */
      {
        tsadd(t1,2,4);
        tsadd(t7,2,4);
      }

/* set up so that get (-90,180) phase corrects in F1 if f1180 flag is y */

   tau1 = d2;
   if (f1180[A] == 'y')  tau1 += ( 1.0/(2.0*sw1));
   tau1 = tau1/2.0;


/* selective H20 one-lobe sinc pulse */
  tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69));   /*needs 1.69 times more*/
  tpwrs = (int) (tpwrs);                   	  /*power than a square pulse */
  if (tpwrsf_d<4095.0) tpwrs=tpwrs+6.0; /* allow for fine power control via tpwrsf_d */

/* BEGIN ACTUAL PULSE SEQUENCE */

status(A);
   obspower(satpwr);            /* Set power for presaturation    */
   decpower(pwClvl);              /* Set decoupler1 power to pwClvl  */
   decpwrf(rf90onco);
   dec2power(pwNlvl);            /* Set decoupler2 power to pwNlvl */

/* Presaturation Period */


  if (satmode[0] == 'y')
    {
      rgpulse(d1,zero,rof1,rof1);
      obspower(tpwr);              /* Set power for hard pulses  */
    }
  else  
    {
      obspower(tpwr);              /* Set power for hard pulses  */
      delay(d1);
    }

status(B);

  rcvroff();
     /* eliminate all magnetization originating on 13C */
   
     decpwrf(rf90onco); 
     decrgpulse(pw90onco,zero,0.0,0.0);
      
     zgradpulse(gzlvl0,gt0);
     delay(gstab);
  
/* shaped pulse for water flip-back */
      obspower(tpwrs); obspwrf(tpwrsf_d);
      shaped_pulse("H2Osinc_d",pwHs,one,rof1,0.0);
      delay(2.0e-6);
      obspower(tpwr); obspwrf(4095.0);
  /* shaped pulse */   
   
  /* transfer from HN to N by INEPT */

  rgpulse(pw,zero,rof1,0.0); /* 90 for 1H */

  zgradpulse(gzlvl0*1.3,gt0);
  delay(gstab);
   
  delay(tauhn - gt0 - gstab);        /* 1/4JHN */
   
  sim3pulse(2.0*pw,0.0,2.0*pwN,zero,zero,zero,0.0,0.0);  /* 180 for 1H and 15N */

  delay(tauhn - gt0 - gstab);       /* 1/4JHN */
   
  zgradpulse(gzlvl0*1.3,gt0);
  delay(gstab);

  rgpulse(pw,three,rof1,0.0);
      
  zgradpulse(gzlvl3,gt3);
  delay(gstab);
   
/* start transfer from N to CO */
      
  dec2rgpulse(pwN,zero,0.0,0.0);
    
  delay(taunco - gt0 - gstab - POWER_DELAY - 0.5*pw180onco);	 /* 1/4J(NCO) */
	  
  decpwrf(rf180onco);              	/* Set decoupler1 power to rf180onco */

  zgradpulse(gzlvl0,gt0);
  delay(gstab);

  sim3pulse(0.0,pw180onco,2.0*pwN,zero,zero,zero,rof1,rof1);  /* 180 for 13C' and 15N */

  zgradpulse(gzlvl0,gt0);
  delay(gstab);

  decpwrf(rf90onco);            /* Set decoupler1 power to rf90onco */

  delay(taunco - gt0 - gstab - POWER_DELAY - 0.5*pw180onco); 	    /* 1/4J(NCO) */

  dec2rgpulse(pwN,one,0.0,0.0);  /* 90 for 15N */
   
  zgradpulse(gzlvl3*1.1,gt3);
  delay(gstab);
   
  decphase(t4);
  decrgpulse(pw90onco,t4,0.0,0.0);  /* 90 for 13C' */
      
   if (abfilter[0] == 'b')
     {
	  decpwrf(rf180offca);    /* Set decoupler1 power to rf180offca */
	  decshaped_pulse("offC3",pw180offca,zero,0.0,0.0); 
	   
          decpwrf(rf180onco);           /* Set decoupler1 power to rf180onco */

	  delay(taucoca - gt0 - gstab - 0.5*pw180onco - pw180offca - 2.0*POWER_DELAY);  /* 1/4J(COCA) */

          zgradpulse(gzlvl0*0.9,gt0);
          delay(gstab);
	
          decrgpulse(pw180onco,zero,0.0,0.0);  /* 180 13C' */
  	  decpwrf(rf180offca);              	     /* Set decoupler1 power to rf180offca */
	  decshaped_pulse("offC3",pw180offca,zero,0.0,0.0); 
    
          zgradpulse(gzlvl0*0.9,gt0);
          delay(gstab);

	  delay(taucoca - gt0 - gstab - 0.5*pw180onco - pw180offca - 2.0*POWER_DELAY);   /* 1/4J(NCO) */

          decpwrf(rf90onco);    /* Set decoupler1 power to rf90onco */

          decrgpulse(pw90onco,one,0.0,0.0); /* 90 for 13C' do not touch alpha's */

          /* Field crusher gradient */
          zgradpulse(gzlvl3*0.9,gt3);
          delay(gstab);
	  /* Field crusher gradient */

        }

      if (abfilter[0] == 'a')
     {
        zgradpulse(gzlvl0*0.9,gt0);
        delay(gstab);
		  
        decpwrf(rf180offca);   /* Set decoupler1 power to rf180offca */

	delay(0.5*taucoca - gt0 - gstab - POWER_DELAY - 0.5*pw180offca);                   /* 1/8J(COCA) */
	 
	decshaped_pulse("offC3",pw180offca,zero,0.0,0.0); 

	delay(0.5*taucoca - gt0 - gstab - POWER_DELAY - 0.5*pw180offca - 0.5*pw180onco);     /* 1/8J(COCA) */
	
        decpwrf(rf180onco);   /* Set decoupler1 power to rf180onco */

        zgradpulse(gzlvl0*0.9,gt0);
        delay(gstab);

        decrgpulse(pw180onco,zero,0.0,0.0);   /* 180 13C' */

        zgradpulse(gzlvl0*0.9,gt0);
        delay(gstab);
	
	decpwrf(rf180offca);      

	delay(0.5*taucoca - gt0 - gstab - POWER_DELAY - 0.5*pw180onco - 0.5*pw180offca); 	  /* 1/8J(COCA) */
	      
        decshaped_pulse("offC3",pw180offca,zero,0.0,0.0);
	 
	delay(0.5*taucoca - gt0 - gstab - POWER_DELAY - 0.5*pw180offca); /* 1/8J(COCA) */

        decpwrf(rf90onco);         /* Set decoupler1 power to rf90onco */

        zgradpulse(gzlvl0*0.9,gt0);
        delay(gstab);


        decrgpulse(pw90onco,zero,0.0,0.0);  /* 90 for 13C' */

        /* Field crusher gradient */
           zgradpulse(gzlvl3*0.9,gt3);
           delay(gstab);
	/* Field crusher gradient */

      }  
 
     dec2rgpulse(pwN,t1,0.0,0.0); /* 90 15N */
  
     if (lambda>0.0)
      { 
        delay(lambda*tau1);  /* (lambda)t1/2 */
   
        decpwrf(rf180offca);   
        sim3shaped_pulse("","offC3","",0.0,pw180offca,2.0*pwN,zero,zero,zero,rof1,rof1);

        delay(lambda*tau1);  /* (lambda)t1/2 */
      }

     delay(tau1);                             /* t1/2 */
     delay(taunco - tauhn - pw180onco);  

     decpwrf(rf180onco);
     decrgpulse(pw180onco,zero,0.0,0.0);     /* 180 for 13C' */

     delay((1-kappa)*tau1);                  /* (1-k)t1/2 */

     dec2rgpulse(2.0*pwN,zero,0.0,0.0);     /* 180 for 15N */
   
     delay((taunco - tauhn - gt1 - gstab) - kappa*tau1);  /* 1/4J(NCO) - 1/4J(NH) - kt1/2 */
          
     zgradpulse(gzlvl1,gt1);
     delay(gstab);
   
   /* start TROSY transfer from N to HN */
      
         
     sim3pulse(pw,0.0,0.0,t2,zero,zero,rof1,rof1);

     zgradpulse(gzlvl5,gt5);
     delay(gstab);
 
     delay(tauhn - gt5 - gstab - POWER_DELAY);
   
      
     decpwrf(rf180onco);
     sim3pulse(2.0*pw,pw180onco,2*pwN,zero,zero,zero,rof1,rof1);
   
     delay(tauhn - gt5 - gstab - POWER_DELAY);
   
      
     zgradpulse(gzlvl5,gt5);
     delay(gstab);
   
     decpwrf(rf90onco);
     sim3pulse(pw,pw90onco,pwN,one,t6,zero,rof1,rof1);
   
      /* shaped pulse WATERGATE */
         obspower(tpwrs); obspwrf(tpwrsf_u);
         shaped_pulse("H2Osinc_u",pwHs,t2,rof1,0.0);
         obspower(tpwr); obspwrf(4095.0);
       /* shaped pulse */
   
     zgradpulse(gzlvl5*0.8,gt5);
     delay(gstab);
      
     delay(tauhn - gt5 - gstab - 2.0*POWER_DELAY - pwHs);
   
     sim3pulse(2*pw,0.0,2*pwN,zero,zero,zero,rof1,rof1);
   
      
     delay(tauhn - gt5 - gstab - 2.0*POWER_DELAY);
   
      decpower(dpwr);
      
     zgradpulse(gzlvl5*0.8,gt5);
     delay(gstab);
   
     dec2rgpulse(pwN,t3,0.0,0.0);  /* 90 for 15N */
      
     dec2power(dpwr2);
      
     delay((gt1/10.0) -pwN + gstab - POWER_DELAY);
      
     rgpulse(2.0*pw, zero, rof1, rof1);
      
     zgradpulse(gzlvl2*icosel,gt1/10.0);
     delay(gstab);
      
   status(C);
     setreceiver(t7);
}
Exemple #13
0
void pulsesequence()
{



/* DECLARE AND LOAD VARIABLES */

char        f1180[MAXSTR],   		      /* Flag to start t1 @ halfdwell */
            f2180[MAXSTR],    		      /* Flag to start t2 @ halfdwell */
            mag_flg[MAXSTR],      /* magic-angle coherence transfer gradients */
 	    TROSY[MAXSTR];			    /* do TROSY on N15 and H1 */
 
int         icosel,          			  /* used to get n and p type */
            t1_counter=getval("t1_counter"),      /* used for states tppi in t1 */
            t2_counter=getval("t2_counter"),      /* used for states tppi in t2 */
	    nli = getval("nli"),
	    nli2 = getval("nli2");

double      tau1,         				         /*  t1 delay */
            tau2,        				         /*  t2 delay */
            timeTN = getval("timeTN"),     /* constant time for 15N evolution */
	    kappa = 5.4e-3,
	    lambda = 2.4e-3,
            
	pwClvl = getval("pwClvl"), 	        /* coarse power for C13 pulse */
        pwC = getval("pwC"),          /* C13 90 degree pulse length at pwClvl */
	rf0,            	  /* maximum fine power when using pwC pulses */

/* the following pulse lengths for SLP pulses are automatically calculated    */
/* by the macro "proteincal".  SLP pulse shapes, "offC3" etc are called       */
/* directly from your shapelib.                    			      */
   pwC3 = getval("pwC3"),  /*180 degree pulse at Ca(56ppm) null at CO(174ppm) */
   pwC3a = getval("pwC3a"),    /* pwC3a=pwC3, but not set to zero when pwC3=0 */
   phshift3,             /* phase shift induced on CO by pwC3 ("offC3") pulse */
   pwZ,					   /* the largest of pwC3 and 2.0*pwN */
   pwZ1,	       /* the largest of pwC3a and 2.0*pwN for 1D experiments */
   pwC6 = getval("pwC6"),     /* 90 degree selective sinc pulse on CO(174ppm) */
   pwC8 = getval("pwC8"),    /* 180 degree selective sinc pulse on CO(174ppm) */
   rf3,	                           /* fine power for the pwC3 ("offC3") pulse */
   rf6,	                           /* fine power for the pwC6 ("offC6") pulse */
   rf8,	                           /* fine power for the pwC8 ("offC8") pulse */

   compH = getval("compH"),       /* adjustment for C13 amplifier compression */
   compC = getval("compC"),       /* adjustment for C13 amplifier compression */

   	pwHs = getval("pwHs"),	        /* H1 90 degree pulse length at tpwrs */
   	tpwrsf = getval("tpwrsf"),      /* fine power for pwHs pulse          */
   	tpwrs,	  	              /* power for the pwHs ("H2Osinc") pulse */

   	pwHd,	    		        /* H1 90 degree pulse length at tpwrd */
   	tpwrd,                                     /* rf for WALTZ decoupling */
        waltzB1 = getval("waltzB1"),  /* waltz16 field strength (in Hz)     */

	pwNlvl = getval("pwNlvl"),	              /* power for N15 pulses */
        pwN = getval("pwN"),          /* N15 90 degree pulse length at pwNlvl */

	sw1 = getval("sw1"),
	sw2 = getval("sw2"),

	gt1 = getval("gt1"),  		       /* coherence pathway gradients */
        gzcal  = getval("gzcal"),            /* g/cm to DAC conversion factor */
	gzlvl1 = getval("gzlvl1"),
	gzlvl2 = getval("gzlvl2"),

	gt0 = getval("gt0"),				   /* other gradients */
	gt3 = getval("gt3"),
	gt4 = getval("gt4"),
	gt5 = getval("gt5"),
	gstab = getval("gstab"),
	gzlvl0 = getval("gzlvl0"),
	gzlvl3 = getval("gzlvl3"),
	gzlvl4 = getval("gzlvl4"),
	gzlvl5 = getval("gzlvl5"),
	gzlvl6 = getval("gzlvl6");

    getstr("f1180",f1180);
    getstr("f2180",f2180);
    getstr("mag_flg",mag_flg);
    getstr("TROSY",TROSY);



/*   LOAD PHASE TABLE    */

	settable(t3,2,phi3);
	settable(t4,1,phx);
	settable(t5,4,phi5);
   if (TROSY[A]=='y')
       {settable(t8,1,phy);
	settable(t9,1,phx);
 	settable(t10,1,phy);
	settable(t11,1,phx);
	settable(t12,4,recT);}
    else
       {settable(t8,1,phx);
	settable(t9,8,phi9);
	settable(t10,1,phx);
	settable(t11,1,phy);
	settable(t12,4,rec);}




/*   INITIALIZE VARIABLES   */

    if( dpwrf < 4095 )
	{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
	  psg_abort(1); }

    /* maximum fine power for pwC pulses */
	rf0 = 4095.0;

    /* 180 degree pulse on Ca, null at CO 118ppm away */
        rf3 = (compC*4095.0*pwC*2.0)/pwC3a;
	rf3 = (int) (rf3 + 0.5);

    /* the pwC3 pulse at the middle of t1  */
	if ((nli2 > 0.0) && (nli == 1.0)) nli = 0.0;
        if (pwC3a > 2.0*pwN) pwZ = pwC3a; else pwZ = 2.0*pwN;
        if ((pwC3==0.0) && (pwC3a>2.0*pwN)) pwZ1=pwC3a-2.0*pwN; else pwZ1=0.0;
	if ( nli > 1 )     pwC3 = pwC3a;
	if ( pwC3 > 0 )   phshift3 = 48.0;
	else              phshift3 = 0.0;

    /* 90 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf6 = (compC*4095.0*pwC*1.69)/pwC6;	/* needs 1.69 times more     */
	rf6 = (int) (rf6 + 0.5);		/* power than a square pulse */

    /* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf8 = (compC*4095.0*pwC*2.0*1.65)/pwC8;	/* needs 1.65 times more     */
	rf8 = (int) (rf8 + 0.5);		/* power than a square pulse */
	
    /* selective H20 one-lobe sinc pulse */
    tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /* needs 1.69 times more */
    tpwrs = (int) (tpwrs);                       /* power than a square pulse */

    /* power level and pulse time for WALTZ 1H decoupling */
	pwHd = 1/(4.0 * waltzB1) ;         
	tpwrd = tpwr - 20.0*log10(pwHd/(compH*pw));
	tpwrd = (int) (tpwrd + 0.5);
 


/* CHECK VALIDITY OF PARAMETER RANGES */

    if ( 0.5*nli2*1/(sw2) > timeTN - WFG3_START_DELAY)
       { printf(" nli2 is too big. Make nli2 equal to %d or less.\n", 
  	 ((int)((timeTN - WFG3_START_DELAY)*2.0*sw2))); psg_abort(1);}

    if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
       { printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}

    if ( dm2[A] == 'y' || dm2[B] == 'y' )
       { printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}

    if ( dpwr2 > 46 )
       { printf("dpwr2 too large! recheck value  "); psg_abort(1);}

    if ( pw > 50.0e-6 )
       { printf(" pw too long ! recheck value "); psg_abort(1);} 
  
    if ( (pwN > 100.0e-6) && (nli>1 || nli2>1))
       { printf(" pwN too long! recheck value "); psg_abort(1);} 
 
    if ( TROSY[A]=='y' && dm2[C] == 'y' )
       { text_error("Choose either TROSY='n' or dm2='n' ! "); psg_abort(1);}



/* PHASES AND INCREMENTED TIMES */

/*  Phase incrementation for hypercomplex 2D data, States-Haberkorn element */

    if (phase1 == 2)   tsadd(t3,1,4);  
    if (TROSY[A]=='y')
	 {  if (phase2 == 2)   				      icosel = +1;
            else 	    {tsadd(t4,2,4);  tsadd(t10,2,4);  icosel = -1;}
	 }
    else {  if (phase2 == 2)  {tsadd(t10,2,4); icosel = +1;}
            else 			       icosel = -1;    
	 }


/*  Set up f1180  */

    if( ix == 1) d2_init = d2;
    tau1 = d2_init + (t1_counter) / sw1;

    if((f1180[A] == 'y') && (nli > 1.0)) 
	{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
    tau1 = tau1/2.0;


/*  Set up f2180  */

    if( ix == 1) d3_init = d3;
    tau2 = d3_init + (t2_counter) / sw2;

    if((f2180[A] == 'y') && (nli2 > 1.0)) 
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2/2.0;


/* Calculate modifications to phases for States-TPPI acquisition          */

   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t12,2,4); }

   if(t2_counter % 2) 
	{ tsadd(t8,2,4); tsadd(t12,2,4); }


/* BEGIN PULSE SEQUENCE */

status(A);
   	delay(d1);
	rcvroff();
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rf0);
	obsoffset(tof);
	txphase(zero);
   	delay(1.0e-5);

       if (TROSY[A] == 'n')
	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(gzlvl0, 0.5e-3);
	delay(1.0e-4);
       if (TROSY[A] == 'n')
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	delay(5.0e-4);

   	rgpulse(pw,zero,0.0,0.0);                      /* 1H pulse excitation */

   	dec2phase(zero);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

   	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

   	txphase(one);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

 	rgpulse(pw, one, 0.0, 0.0);
    if (tpwrsf < 4095.0)
     {obspwrf(tpwrsf); tpwrs=tpwrs+6.0;}
    obspower(tpwrs);
if (TROSY[A]=='y')
   {txphase(two);
    shaped_pulse("H2Osinc", pwHs, two, 5.0e-4, 0.0);
    obspower(tpwr); obspwrf(4095.0);
    zgradpulse(gzlvl3, gt3);
    delay(2.0e-4);
    dec2rgpulse(pwN, zero, 0.0, 0.0);

    delay(0.5*kappa - 2.0*pw);

    rgpulse(2.0*pw, two, 0.0, 0.0);

    decphase(zero);
    dec2phase(zero);
    decpwrf(rf8);
    delay(timeTN - 0.5*kappa - WFG3_START_DELAY);
   }
else
   {txphase(zero);
    shaped_pulse("H2Osinc", pwHs, zero, 5.0e-4, 0.0);
    obspower(tpwrd); obspwrf(4095.0);
    zgradpulse(gzlvl3, gt3);
    delay(2.0e-4);
    dec2rgpulse(pwN, zero, 0.0, 0.0);

    txphase(one);
    delay(kappa - pwHd - 2.0e-6 - PRG_START_DELAY);

    rgpulse(pwHd,one,0.0,0.0);
    txphase(zero);
    delay(2.0e-6);
    obsprgon("waltz16", pwHd, 90.0);	          /* PRG_START_DELAY */
    xmtron();
    decphase(zero);
    dec2phase(zero);
    decpwrf(rf8);
    delay(timeTN - kappa - WFG3_START_DELAY);
   }
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero, 
								     0.0, 0.0);
	decphase(t3);
	decpwrf(rf6);
	delay(timeTN);

	dec2rgpulse(pwN, zero, 0.0, 0.0);
if (TROSY[A]=='n')
   {xmtroff();
    obsprgoff();
    rgpulse(pwHd,three,2.0e-6,0.0);}
	zgradpulse(gzlvl3, gt3);
 	delay(2.0e-4);
	decshaped_pulse("offC6", pwC6, t3, 0.0, 0.0);
	decphase(zero);

/*   xxxxxxxxxxxxxxxxxxxxxx       13CO EVOLUTION        xxxxxxxxxxxxxxxxxx    */

if ((nli>1.0) && (tau1>0.0))          /* total 13C evolution equals d2 exactly */
   {				  /* 13C evolution during pwC6 is at 60% rate */
	decpwrf(rf3);
     if(tau1 - 0.6*pwC6 - WFG3_START_DELAY - 0.5*pwZ > 0.0)
	   {
	delay(tau1 - 0.6*pwC6 - WFG3_START_DELAY - 0.5*pwZ);
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC3", "", 0.0, pwC3a, 2.0*pwN, zero, zero, zero,
							   	      0.0, 0.0);
	initval(phshift3, v3);
	decstepsize(1.0);
	dcplrphase(v3);  				        /* SAPS_DELAY */
	delay(tau1 - 0.6*pwC6 - SAPS_DELAY - 0.5*pwZ- WFG_START_DELAY - 2.0e-6);
	   }
      else
	   {
	initval(180.0, v3);
	decstepsize(1.0);
	dcplrphase(v3);  				        /* SAPS_DELAY */
	delay(2.0*tau1 - 2.0*0.6*pwC6 - SAPS_DELAY - WFG_START_DELAY - 2.0e-6);
	   }
   }


else if ((nli==1.0) && (pwC3==1.0e-6))        /* 13CO evolution for dof calib. */
   {
 	decpwrf(rf8);
	delay((1.0/(dfrq*80.0)) + 2.0e-6);		   /* WFG_START_DELAY */
	decshaped_pulse("offC8", pwC8, zero, 0.0, 0.0);
   }


else if (nli==1.0)         /* special 1D check of pwC3 phase enabled when nli=1 */
   {
	decpwrf(rf3);
	delay(10.0e-6 + SAPS_DELAY + 0.5*pwZ1 + WFG_START_DELAY);
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC3", "", 0.0, pwC3, 2.0*pwN, zero, zero, zero, 
							         2.0e-6 , 0.0);
	initval(phshift3, v3);
	decstepsize(1.0);
	dcplrphase(v3);  					/* SAPS_DELAY */
	delay(10.0e-6 + WFG3_START_DELAY + 0.5*pwZ1);
   }


else             /* 13CO evolution refocused for 1st increment, or when nli=0  */
   {
 	decpwrf(rf8);
	delay(12.0e-6);					   /* WFG_START_DELAY */
	decshaped_pulse("offC8", pwC8, zero, 0.0, 0.0);
	delay(10.0e-6);
   }
	decphase(t5);
	decpwrf(rf6);
	delay(2.0e-6);					   /* WFG_START_DELAY */
	decshaped_pulse("offC6", pwC6, t5, 0.0, 0.0);

/*  xxxxxxxxxxxxxxxxxx    OPTIONS FOR N15 EVOLUTION    xxxxxxxxxxxxxxxxxxxxx  */

	dec2phase(t8);
	zgradpulse(gzlvl4, gt4);
	txphase(one);
	dcplrphase(zero);
 	delay(2.0e-4);
        if (TROSY[A]=='n')
	   {rgpulse(pwHd,one,0.0,0.0);
	    txphase(zero);
	    delay(2.0e-6);
	    obsprgon("waltz16", pwHd, 90.0);
	    xmtron();}
	dec2rgpulse(pwN, t8, 0.0, 0.0);

	decphase(zero);
	dec2phase(t9);
	decpwrf(rf8);
	delay(timeTN - WFG3_START_DELAY - tau2);
							 /* WFG3_START_DELAY  */
	sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, t9, 
								   0.0, 0.0);

	dec2phase(t10);
        decpwrf(rf3);

if (TROSY[A]=='y')
{    if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.5e-4 + pwHs)
	{
	  txphase(three);
          delay(timeTN - pwC3a - WFG_START_DELAY);         /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.5e-4 - pwHs);
          if (mag_flg[A]=='y')  magradpulse(icosel*gzcal*gzlvl1, gt1);
          else  zgradpulse(icosel*gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
          obspower(tpwrs);
          if (tpwrsf<4095.0)
	   {obspwrf(tpwrsf);				       /* POWER_DELAY */
	    delay(1.0e-4 - POWER_DELAY - PWRF_DELAY);}
          else
	   delay(1.0e-4 - POWER_DELAY);
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
	  txphase(t4);
          obspower(tpwr);
          if (tpwrsf<4095.0)
	   {obspwrf(4095.0);				       /* POWER_DELAY */
	    delay(0.50e-4 - POWER_DELAY - PWRF_DELAY);}
          else
	   delay(0.50e-4 - POWER_DELAY);
	}

    else if (tau2 > pwHs + 0.5e-4)
	{
	  txphase(three);
          delay(timeTN-pwC3a-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else  zgradpulse(icosel*gzlvl1, gt1);	   	/* 2.0*GRADIENT_DELAY */
          obspower(tpwrs);
          if (tpwrsf<4095.0)
	   {obspwrf(tpwrsf);				       /* POWER_DELAY */
	    delay(1.0e-4 - POWER_DELAY - PWRF_DELAY);}
          else
	   delay(1.0e-4 - POWER_DELAY);
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(tau2 - pwHs - 0.5e-4);
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
	  txphase(t4);
          obspower(tpwr);
          if (tpwrsf<4095.0)
	   {obspwrf(4095.0);				       /* POWER_DELAY */
	    delay(0.50e-4 - POWER_DELAY - PWRF_DELAY);}
          else
	   delay(0.50e-4 - POWER_DELAY);
	}
    else
	{
	  txphase(three);
          delay(timeTN - pwC3a - WFG_START_DELAY - gt1 - 2.0*GRADIENT_DELAY
							    - 1.5e-4 - pwHs);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else  zgradpulse(icosel*gzlvl1, gt1);	   	/* 2.0*GRADIENT_DELAY */
          obspower(tpwrs);
          if (tpwrsf<4095.0)
	   {obspwrf(tpwrsf);				       /* POWER_DELAY */
	    delay(1.0e-4 - POWER_DELAY - PWRF_DELAY);}
          else
	   delay(1.0e-4 - POWER_DELAY);
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
	  txphase(t4);
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(tau2);
          obspower(tpwr);
          if (tpwrsf<4095.0)
	   {obspwrf(4095.0);				       /* POWER_DELAY */
	    delay(0.50e-4 - POWER_DELAY - PWRF_DELAY);}
          else
	   delay(0.50e-4 - POWER_DELAY);
	 }
}
else
{
    if (tau2 > kappa)
	{
          delay(timeTN - pwC3a - WFG_START_DELAY);     	   /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
          delay(kappa - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else    zgradpulse(icosel*gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else if (tau2 > (kappa - pwC3a - WFG_START_DELAY))
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);                                     /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(kappa -pwC3a -WFG_START_DELAY -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else    zgradpulse(icosel*gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
          delay(kappa - tau2 - pwC3a - WFG_START_DELAY);   /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else    zgradpulse(icosel*gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
	  obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
    	  delay(kappa-tau2-pwC3a-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else    zgradpulse(icosel*gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                    /* WFG_START_DELAY */
          decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
          delay(tau2);
	}
}                                                          
/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
	if (TROSY[A]=='y')  rgpulse(pw, t4, 0.0, 0.0);
	else                sim3pulse(pw, 0.0, pwN, t4, zero, t10, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl5, gt5);
	if (TROSY[A]=='y')   delay(lambda - 0.65*(pw + pwN) - gt5);
	else   delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	txphase(one);
	dec2phase(t11);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(pw, 0.0, pwN, one, zero, t11, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl6, gt5);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	dec2phase(t10);
	zgradpulse(gzlvl6, gt5);
	if (TROSY[A]=='y')   delay(lambda - 1.6*pwN - gt5);
	else   delay(lambda - 0.65*pwN - gt5);

	if (TROSY[A]=='y')   dec2rgpulse(pwN, t10, 0.0, 0.0); 
	else    	     rgpulse(pw, zero, 0.0, 0.0); 

	delay((gt1/10.0) + 1.0e-4 +gstab - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);

	rgpulse(2.0*pw, zero, 0.0,0.0);
	dec2power(dpwr2);				       /* POWER_DELAY */
        if (mag_flg[A] == 'y')    magradpulse(gzcal*gzlvl2, gt1/10.0);
        else   zgradpulse(gzlvl2, gt1/10.0);            /* 2.0*GRADIENT_DELAY */
        delay(gstab);
        rcvron();
statusdelay(C,1.0e-4 );

	setreceiver(t12);
}		 
Exemple #14
0
pulsesequence()
{

/* DECLARE AND LOAD VARIABLES */

char        f1180[MAXSTR],   		      /* Flag to start t1 @ halfdwell */
            f2180[MAXSTR],    		      /* Flag to start t2 @ halfdwell */
            mag_flg[MAXSTR];      /* magic-angle coherence transfer gradients */
 
int         icosel,          			  /* used to get n and p type */
            t1_counter,  		        /* used for states tppi in t1 */
            t2_counter,  	 	        /* used for states tppi in t2 */
	    ni2 = getval("ni2");

double      tau1,         				         /*  t1 delay */
            tau2,        				         /*  t2 delay */
            timeTN = getval("timeTN"),     /* constant time for 15N evolution */
	    kappa = 5.4e-3,
	    lambda = 2.4e-3,
            
	pwClvl = getval("pwClvl"), 	        /* coarse power for C13 pulse */
        pwC = getval("pwC"),          /* C13 90 degree pulse length at pwClvl */
	rf0,            	  /* maximum fine power when using pwC pulses */

/* the following pulse lengths for SLP pulses are automatically calculated    */
/* by the macro "biocal".  SLP pulse shapes, "offC3" etc are called       */
/* directly from your shapelib.                    			      */
   pwC3 = getval("pwC3"),  /*180 degree pulse at Ca(56ppm) null at CO(174ppm) */
   pwC3a,                      /* pwC3a=pwC3, but not set to zero when pwC3=0 */
   phshift3,             /* phase shift induced on CO by pwC3 ("offC3") pulse */
   pwZ,					   /* the largest of pwC3 and 2.0*pwN */
   pwC6,                      /* 90 degree selective sinc pulse on CO(174ppm) */
   pwC8,                     /* 180 degree selective sinc pulse on CO(174ppm) */
   rf3,	                           /* fine power for the pwC3 ("offC3") pulse */
   rf6,	                           /* fine power for the pwC6 ("offC6") pulse */
   rf8,	                           /* fine power for the pwC8 ("offC8") pulse */
   bw, ofs, ppm,  /* bandwidth, offset, ppm - temporary Pbox parameters */

   compH = getval("compH"),       /* adjustment for C13 amplifier compression */
   compC = getval("compC"),       /* adjustment for C13 amplifier compression */

   	pwHs = getval("pwHs"),	        /* H1 90 degree pulse length at tpwrs */
   	tpwrsf = getval("tpwrsf"),      /* fine power for pwHs pulse          */
   	tpwrs,	  	              /* power for the pwHs ("H2Osinc") pulse */

   	pwHd,	    		        /* H1 90 degree pulse length at tpwrd */
   	tpwrd,	  	                   /* rf for WALTZ decoupling */

        waltzB1 = getval("waltzB1"),  /* waltz16 field strength (in Hz)     */
	pwNlvl = getval("pwNlvl"),	              /* power for N15 pulses */
        pwN = getval("pwN"),          /* N15 90 degree pulse length at pwNlvl */

	sw1 = getval("sw1"),
	sw2 = getval("sw2"),

	gt1 = getval("gt1"),  		       /* coherence pathway gradients */
        gzcal  = getval("gzcal"),            /* g/cm to DAC conversion factor */
	gzlvl1 = getval("gzlvl1"),
	gzlvl2 = getval("gzlvl2"),

	gt0 = getval("gt0"),				   /* other gradients */
	gt3 = getval("gt3"),
	gt4 = getval("gt4"),
	gt5 = getval("gt5"),
	gzlvl0 = getval("gzlvl0"),
	gzlvl3 = getval("gzlvl3"),
	gzlvl4 = getval("gzlvl4"),
	gzlvl5 = getval("gzlvl5"),
	gzlvl6 = getval("gzlvl6");

    getstr("f1180",f1180);
    getstr("f2180",f2180);
    getstr("mag_flg",mag_flg);



/*   LOAD PHASE TABLE    */

	settable(t3,2,phi3);
	settable(t4,1,phx);
	settable(t5,4,phi5);
       {settable(t8,1,phx);
	settable(t9,8,phi9);
	settable(t10,1,phx);
	settable(t11,1,phy);
	settable(t12,4,rec);}

/*   INITIALIZE VARIABLES   */

    if( dpwrf < 4095 )
	{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
	  psg_abort(1); }

    /* maximum fine power for pwC pulses */
	rf0 = 4095.0;


      setautocal();                      /* activate auto-calibration */   

      if (autocal[0] == 'n') 
      {
    /* offC3 - 180 degree pulse on Ca, null at CO 118ppm away */
          pwC3a = getval("pwC3a");    
          rf3 = (compC*4095.0*pwC*2.0)/pwC3a;
	  rf3 = (int) (rf3 + 0.5);  
	
    /* 90 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */	
          pwC6 = getval("pwC6");    
	  rf6 = (compC*4095.0*pwC*1.69)/pwC6;	/* needs 1.69 times more     */
	  rf6 = (int) (rf6 + 0.5);		/* power than a square pulse */

    /* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
          pwC8 = getval("pwC8");
	  rf8 = (compC*4095.0*pwC*2.0*1.65)/pwC8;  /* needs 1.65 times more     */
	  rf8 = (int) (rf8 + 0.5);		   /* power than a square pulse */

    /* selective H20 one-lobe sinc pulse */
          tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /* needs 1.69 times more */
          tpwrs = (int) (tpwrs);                       /* power than a square pulse */

    /* power level and pulse time for WALTZ 1H decoupling */
	  pwHd = 1/(4.0 * waltzB1) ;                              /* 7.5 kHz rf   */
	  tpwrd = tpwr - 20.0*log10(pwHd/(compH*pw));
	  tpwrd = (int) (tpwrd + 0.5);
      }
      else      /* if autocal = 'y'(yes), 'q'(quiet), 'r'(read) or 's'(semi) */
      {
        if(FIRST_FID)                                         /* make shapes */
        {
          ppm = getval("dfrq"); 
          bw = 118.0*ppm; ofs = -bw; 
          offC3 = pbox_make("offC3", "square180n", bw, ofs, compC*pwC, pwClvl);
          offC6 = pbox_make("offC6", "sinc90n", bw, 0.0, compC*pwC, pwClvl);
          offC8 = pbox_make("offC8", "sinc180n", bw, 0.0, compC*pwC, pwClvl);
          H2Osinc = pbox_Rsh("H2Osinc", "sinc90", pwHs, 0.0, compH*pw, tpwr);
          bw = 2.8*7500.0;
          wz16 = pbox_Dcal("WALTZ16", 2.8*waltzB1, 0.0, compH*pw, tpwr);

          ofs_check(H1ofs, C13ofs, N15ofs, H2ofs);
        }
        pwC3a = offC3.pw; rf3 = offC3.pwrf;             /* set up parameters */
        pwC6 = offC6.pw; rf6 = offC6.pwrf; 
        pwC8 = offC8.pw; rf8 = offC8.pwrf;
        pwHs = H2Osinc.pw; tpwrs = H2Osinc.pwr-1.0;  /* 1dB correction applied */
        tpwrd = wz16.pwr; pwHd = 1.0/wz16.dmf;  
      }

      if (tpwrsf < 4095.0) tpwrs = tpwrs + 6.0;

    /* the pwC3 pulse at the middle of t1  */
       if (pwC3a > 2.0*pwN) pwZ = pwC3a; else pwZ = 2.0*pwN;
       phshift3=0.0;
       if(pwC3 > 0) phshift3 = 48.0;

/* CHECK VALIDITY OF PARAMETER RANGES */

    if ( 0.5*ni2*1/(sw2) > timeTN - pwC3a - WFG3_START_DELAY)
       { printf(" ni2 is too big. Make ni2 equal to %d or less.\n", 
  	 ((int)((timeTN - WFG3_START_DELAY)*2.0*sw2))); psg_abort(1);}

    if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
       { printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}

    if ( dm2[A] == 'y' || dm2[B] == 'y' )
       { printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}

    if ( dpwr2 > 50 )
       { printf("dpwr2 too large! recheck value  "); psg_abort(1);}

    if ( pw > 50.0e-6 )
       { printf(" pw too long ! recheck value "); psg_abort(1);} 
  
    if ( (pwN > 100.0e-6) && (ni>1 || ni2>1))
       { printf(" pwN too long! recheck value "); psg_abort(1);} 
 

/* PHASES AND INCREMENTED TIMES */

/*  Phase incrementation for hypercomplex 2D data, States-Haberkorn element */

    if (phase1 == 2)   tsadd(t3,1,4);  
    {  
       if (phase2 == 2)  {tsadd(t10,2,4); icosel = +1;}
       else 			       icosel = -1;    
    }


/*  Set up f1180  */
   
    tau1 = d2;
    if(f1180[A] == 'y') 
	{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
    tau1 = tau1/2.0;


/*  Set up f2180  */

    tau2 = d3;
    if(f2180[A] == 'y') 
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2/2.0;


/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t12,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t8,2,4); tsadd(t12,2,4); }



/* BEGIN PULSE SEQUENCE */

status(A);
    delay(d1);
    rcvroff();
    obspower(tpwr);
    decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rf0);
	obsoffset(tof);
	txphase(zero);
   	delay(1.0e-5);

	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(gzlvl0, 0.5e-3);
	delay(1.0e-4);
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	delay(5.0e-4);

   	rgpulse(pw,zero,0.0,0.0);                      /* 1H pulse excitation */

   	dec2phase(zero);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

   	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

   	txphase(one);
	zgradpulse(gzlvl0, gt0);
	delay(lambda - gt0);

 	rgpulse(pw, one, 0.0, 0.0);

    if (tpwrsf < 4095.0) obspwrf(tpwrsf);
    obspower(tpwrs);
    txphase(two);
    shaped_pulse("H2Osinc", pwHs, two, 2.0e-6, 0.0);
    obspower(tpwrd);
    if (tpwrsf < 4095.0) obspwrf(4095.0);
    zgradpulse(gzlvl3, gt3);
    delay(2.0e-4);
    dec2rgpulse(pwN, zero, 0.0, 0.0);

    txphase(one);
    delay(kappa - pwHd - 2.0e-6 - PRG_START_DELAY);

    rgpulse(pwHd,one,0.0,0.0);
    txphase(zero);
    delay(2.0e-6);
    obsprgon("waltz16", pwHd, 90.0);	          /* PRG_START_DELAY */
    xmtron();
    decphase(zero);
    dec2phase(zero);
    decpwrf(rf8);
    delay(timeTN - kappa - WFG3_START_DELAY);
   
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC8", "", 0.0, pwC8, 2.0*pwN, zero, zero, zero, 
								     0.0, 0.0);
	decphase(t3);
	decpwrf(rf6);
	delay(timeTN);

	dec2rgpulse(pwN, zero, 0.0, 0.0);
   xmtroff();
   obsprgoff();
   rgpulse(pwHd,three,2.0e-6,0.0);
   zgradpulse(gzlvl3, gt3);
   delay(2.0e-4);
    rgpulse(pwHd,one,0.0,0.0);
    txphase(zero);
    delay(2.0e-6);
    obsprgon("waltz16", pwHd, 90.0);	          /* PRG_START_DELAY */
    xmtron();
/*   xxxxxxxxxxxxxxxxxxxxxx       13CO EVOLUTION        xxxxxxxxxxxxxxxxxx    */

   decshaped_pulse("offC6", pwC6, t3, 1.0e-6, 0.0);
   decphase(zero);


   if((tau1 - 2.0*pwC6/3.14 - WFG3_START_DELAY - 0.5*pwZ - POWER_DELAY) > SAPS_DELAY)
   {
      decpwrf(rf3);
      delay(tau1 - 2.0*pwC6/3.14 - WFG3_START_DELAY - 0.5*pwZ - POWER_DELAY);
      sim3shaped_pulse("", "offC3", "", 0.0, pwC3a, 2.0*pwN, zero, zero, zero,0.0,0.0);
      initval(phshift3, v3);
      decstepsize(1.0);
      dcplrphase(v3);  				        /* SAPS_DELAY */
      decpwrf(rf6);
      decphase(t5);
      delay(tau1 - 2.0*pwC6/3.14 - SAPS_DELAY - 0.5*pwZ- WFG3_START_DELAY - POWER_DELAY);
   }
   else
   {
       decpwrf(rf8);
       decshaped_pulse("offC8", pwC8, zero, 2.0e-6, 0.0);
       decpwrf(rf6);
       decphase(t5);
       delay(2.0e-6);
   }

   decshaped_pulse("offC6", pwC6, t5, 0.5e-6, 1.0e-6);
   xmtroff();
   obsprgoff();
   rgpulse(pwHd,three,2.0e-6,0.0);

/*  xxxxxxxxxxxxxxxxxx    N15 EVOLUTION    xxxxxxxxxxxxxxxxxxxxx  */

   dec2phase(t8);
   zgradpulse(gzlvl4, gt4);
   dcplrphase(zero);
   obspower(tpwr);
   delay(2.0e-4);

   dec2rgpulse(pwN, t8, 0.0, 0.0);
   decpwrf(rf3);
   decphase(zero);
   delay((timeTN - tau2 - pwC3a)/2.0);
   decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);

   dec2phase(t9);
   decpwrf(rf8);
   delay((timeTN - tau2 - pwC3a)/2.0);
							 /* WFG3_START_DELAY  */
/*
   sim3shaped_pulse("", "offC8", "", 2.0*pw, pwC8, 2.0*pwN, zero, zero, t9, 
								   0.0, 0.0);
*/
   sim3shaped_pulse("", "offC8", "",0.0,pwC8,2.0*pwN,zero,zero,t9,0.0,0.0);
   dec2phase(t10);
   decpwrf(rf3);

   delay((timeTN + tau2 - pwC3a)/2.0);
   decshaped_pulse("offC3", pwC3a, zero, 0.0, 0.0);
   delay((timeTN + tau2 - pwC3a)/2.0 - 2.75e-3 - 2.0*pw);
   rgpulse(2.0*pw,zero, 0.0, 0.0);
   if (mag_flg[A]=='y')   
   {
        magradpulse(gzcal*gzlvl1, gt1);
   }
   else
   {
        zgradpulse(gzlvl1, gt1);  
        delay(4.0*GRADIENT_DELAY);
   }
   txphase(t4);
   delay(2.75e-3 - gt1 - 6.0*GRADIENT_DELAY);     

/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
   sim3pulse(pw, 0.0, pwN, t4, zero, t10, 0.0, 0.0);

   txphase(zero);
   dec2phase(zero);
   zgradpulse(gzlvl5, gt5);
   delay(lambda - 1.3*pwN - gt5);

   sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

   zgradpulse(gzlvl5, gt5);
   txphase(one);
   dec2phase(t11);
   delay(lambda - 1.3*pwN - gt5);

   sim3pulse(pw, 0.0, pwN, one, zero, t11, 0.0, 0.0);

   txphase(zero);
   dec2phase(zero);
   zgradpulse(gzlvl6, gt5);
   delay(lambda - 1.3*pwN - gt5);

   sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

   zgradpulse(gzlvl6, gt5);
   delay(lambda - 0.65*pwN - gt5);

   rgpulse(pw, zero, 0.0, 0.0); 

   delay((gt1/10.0) + 1.0e-4 - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);

   rgpulse(2.0*pw, zero, 0.0,0.0);
   dec2power(dpwr2);				       /* POWER_DELAY */
   if (mag_flg[A] == 'y')    magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);
   else   zgradpulse(icosel*gzlvl2, gt1/10.0);            /* 2.0*GRADIENT_DELAY */
   rcvron();
statusdelay(C,1.0e-4);

	setreceiver(t12);
}		 
Exemple #15
0
void pulsesequence()
{

/* DECLARE AND LOAD VARIABLES */

char        f1180[MAXSTR],   		      /* Flag to start t1 @ halfdwell */
            mag_flg[MAXSTR],                            /*magic angle gradient*/
            f2180[MAXSTR],    		      /* Flag to start t2 @ halfdwell */
	    stCdec[MAXSTR],	       /* calls STUD+ waveforms from shapelib */
	    STUD[MAXSTR];   /* apply automatically calculated STUD decoupling */
 
int         icosel1,          			  /* used to get n and p type */
	    icosel2,
            t1_counter,  		        /* used for states tppi in t1 */
            t2_counter,  	 	        /* used for states tppi in t2 */
	    ni2 = getval("ni2");

double      tau1,         				         /*  t1 delay */
            tau2,        				         /*  t2 delay */
	    del = getval("del"),     /* time delays for CH coupling evolution */
         BPdpwrspinlock,        /*  user-defined upper limit for spinlock(Hz) */
         BPpwrlimits,           /*  =0 for no limit, =1 for limit             */

	    del1 = getval("del1"),
	    del2 = getval("del2"),
/* STUD+ waveforms automatically calculated by macro "biocal"  	      */
/* and string parameter stCdec calls them from your shapelib. 	              */
   stdmf,                                /* dmf for STUD decoupling           */
   studlvl,	                         /* coarse power for STUD+ decoupling */
   rf80 = getval("rf80"), 			  /* rf in Hz for 80ppm STUD+ */
   bw, ofs, ppm,                            /* temporary Pbox parameters */
	pwClvl = getval("pwClvl"), 	        /* coarse power for C13 pulse */
        pwC = getval("pwC"),          /* C13 90 degree pulse length at pwClvl */
	rf0,            	  /* maximum fine power when using pwC pulses */

/* p_d is used to calculate the isotropic mixing on the Cab region            */
        spinlock = getval("spinlock"), /* DIPSI-3 spinlock field strength in Hz */
        p_d,                  	       /* 50 degree pulse for DIPSI-2 at rfd  */
        rfd,                    /* fine power for 7 kHz rf for 500MHz magnet  */
	ncyc = getval("ncyc"), 			  /* no. of cycles of DIPSI-3 */

/* the following pulse lengths for SLP pulses are automatically calculated    */
/* by the macro "ghcch_tocsy" .  SLP pulse shapes, "offC10" etc are called   */
/* directly from your shapelib.                    			      */
   pwC10,                       /* 180 degree selective sinc pulse on CO(174ppm) */
   pwZ,					  /* the largest of pwC10 and 2.0*pwN */
   rf10,	                 /* fine power for the pwC10 ("offC10") pulse */

   compC = getval("compC"),         /* adjustment for C13 amplifier compression */

	pwNlvl = getval("pwNlvl"),	              /* power for N15 pulses */
        pwN = getval("pwN"),          /* N15 90 degree pulse length at pwNlvl */

	sw1 = getval("sw1"),
	sw2 = getval("sw2"),

	gt1 = getval("gt1"),  		       /* coherence pathway gradients */
	gzcal = getval("gzcal"),               /* G/cm to DAC coversion factor*/
        gzlvl1 = getval("gzlvl1"),
	gzlvl2 = getval("gzlvl2"),

	gt3 = getval("gt3"),				   /* other gradients */
	gt5 = getval("gt5"),
	gzlvl3 = getval("gzlvl3"),
	gzlvl4 = getval("gzlvl4"),
	gzlvl5 = getval("gzlvl5"),
	gzlvl6 = getval("gzlvl6");

    getstr("STUD",STUD);
    getstr("mag_flg",mag_flg);
    getstr("f1180",f1180);
    getstr("f2180",f2180);
   strcpy(stCdec, "stCdec80");
   stdmf = getval("dmf80");
   studlvl = pwClvl + 20.0*log10(compC*pwC*4.0*rf80);
   studlvl = (int) (studlvl + 0.5);
  P_getreal(GLOBAL,"BPpwrlimits",&BPpwrlimits,1);
  P_getreal(GLOBAL,"BPdpwrspinlock",&BPdpwrspinlock,1);


/*   LOAD PHASE TABLE    */

	settable(t3,2,phi3);
	settable(t6,1,phi6);
	settable(t5,4,phi5);
	settable(t10,1,phi10);
	settable(t11,4,rec);

        

/*   INITIALIZE VARIABLES   */


  if (BPpwrlimits > 0.5)
  {
   if (spinlock > BPdpwrspinlock)
    {
     spinlock = BPdpwrspinlock;  
     printf("spinlock too large, reset to user-defined limit (BPdpwrspinlock)");
     psg_abort(1);
    }
  }
    if( dpwrf < 4095 )
	{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
	  psg_abort(1); }

    /* maximum fine power for pwC pulses */
	rf0 = 4095.0;

      setautocal();                        /* activate auto-calibration flags */ 
        
      if (autocal[0] == 'n') 
      {
        /* "offC10": 180 degree one-lobe sinc pulse on CO, null at Ca 139ppm away */
        pwC10 = getval("pwC10");
	  rf10 = (compC*4095.0*pwC*2.0*1.65)/pwC10;     /* needs 1.65 times more     */
	  rf10 = (int) (rf10 + 0.5);		           /* power than a square pulse */

        if( pwC > (24.0e-6*600.0/sfrq) )
	  { printf("Increase pwClvl so that pwC < 24*600/sfrq");
	    psg_abort(1); 
        }
      }
      else        /* if autocal = 'y'(yes), 'q'(quiet), r(read), or 's'(semi) */
      {
        if(FIRST_FID)                                            /* call Pbox */
        {
          ppm = getval("dfrq"); 
          bw = 118.0*ppm; ofs = 139.0*ppm;
          offC10 = pbox_make("offC10", "sinc180n", bw, ofs, compC*pwC, pwClvl);
          if(dm3[B] == 'y') H2ofs = 3.2;    
          ofs_check(H1ofs, C13ofs, N15ofs, H2ofs);
        }
        rf10 = offC10.pwrf;  pwC10 = offC10.pw;
      }
				
   /* dipsi-3 decoupling on CbCa */	
 	p_d = (5.0)/(9.0*4.0*spinlock);      /*  DIPSI-3 Field Strength */
 	rfd = (compC*4095.0*pwC*5.0)/(p_d*9.0);
	rfd = (int) (rfd + 0.5);
  	ncyc = (int) (ncyc + 0.5);


/* CHECK VALIDITY OF PARAMETER RANGES */

    if( gt1 > 0.5*del - 1.0e-4)
    {
        printf(" gt1 is too big. Make gt1 less than %f.\n", (0.5*del - 1.0e-4));
        psg_abort(1);
    }

    if( dm[A] == 'y' )
    {
        printf("incorrect dec1 decoupler flag! Should be 'nny' or 'nnn' ");
        psg_abort(1);
    }

    if((dm2[A] == 'y' || dm2[C] == 'y'))
    {
        printf("incorrect dec2 decoupler flags! Should be 'nnn' ");
        psg_abort(1);
    }
    if((dm3[A] == 'y' || dm3[C] == 'y'))
    {
        printf("incorrect dec3 decoupler flags! Should be 'nnn' or 'nyn' ");
        psg_abort(1);
    }

    if( dpwr > 52 )
    {
        printf("don't fry the probe, DPWR too large!  ");
        psg_abort(1);
    }

    if( pw > 50.0e-6 )
    {
        printf("dont fry the probe, pw too high ! ");
        psg_abort(1);
    } 
  
    if( pwN > 100.0e-6 )
    {
        printf("dont fry the probe, pwN too high ! ");
        psg_abort(1);
    } 
 

/* PHASES AND INCREMENTED TIMES */

/*  Phase incrementation for hypercomplex 2D data, States-Haberkorn element */

    icosel1 = -1;  icosel2 = -1;
    if (phase1 == 2) 
	{ tsadd(t6,2,4); icosel1 = -1*icosel1; }
    if (phase2 == 2) 
	{ tsadd(t10,2,4); icosel2 = -1*icosel2; tsadd(t6,2,4); }


/*  Set up f1180  */
   
    tau1 = d2;
    if((f1180[A] == 'y') && (ni > 1.0)) 
	{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
    tau1 = tau1/2.0;


/*  Set up f2180  */

    tau2 = d3;
    if((f2180[A] == 'y') && (ni2 > 1.0)) 
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2/2.0;



/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t11,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t5,2,4); tsadd(t11,2,4); }



/*   BEGIN PULSE SEQUENCE   */

status(A);
        if ( dm3[B] == 'y' )
          lk_sample();  
        if ((ni/sw1-d2)>0) 
         delay(ni/sw1-d2);       /*decreases as t1 increases for const.heating*/
        if ((ni2/sw2-d3)>0) 
         delay(ni2/sw2-d3);      /*decreases as t2 increases for const.heating*/
   	delay(d1);
        if ( dm3[B] == 'y' )
          { lk_hold(); lk_sampling_off();}  /*freezes z0 correction, stops lock pulsing*/

	rcvroff();
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rf0);
	obsoffset(tof);
	txphase(t3);
	delay(1.0e-5);

	decrgpulse(pwC, zero, 0.0, 0.0);	   /*destroy C13 magnetization*/
	zgradpulse(gzlvl1, 0.5e-3);
	delay(1.0e-4);
	decrgpulse(pwC, one, 0.0, 0.0);
	zgradpulse(0.7*gzlvl1, 0.5e-3);
	delay(5.0e-4);

      if ( dm3[B] == 'y' )     /* begins optional 2H decoupling */
        {
          dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
          dec3unblank();
          dec3phase(zero);
          delay(2.0e-6);
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
        }
	rgpulse(pw, t3, 0.0, 0.0);                    /* 1H pulse excitation */

        decphase(zero);
	delay(0.5*del + tau1 - 2.0*pwC);

        decrgpulse(2.0*pwC, zero, 0.0, 0.0);

        txphase(zero);
	delay(tau1);

	rgpulse(2.0*pw, zero, 0.0, 0.0);

                if (mag_flg[A] == 'y')
                {
                   magradpulse(icosel1*gzcal*gzlvl1,0.1*gt1);
                }
                else
                {
                   zgradpulse(icosel1*gzlvl1, 0.1*gt1);
                }
        decphase(t5);
	delay(0.5*del - 0.1*gt1);

	simpulse(pw, pwC, zero, t5, 0.0, 0.0);

	zgradpulse(gzlvl3, gt3);
        decphase(zero);
	delay(0.5*del2 - gt3);

	simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl3, gt3);
        txphase(t6);
        decphase(one);
	delay(0.5*del2 - gt3);

	simpulse(pw, pwC, t6, one, 0.0, 0.0);

	zgradpulse(gzlvl4, gt3);
        txphase(zero);
        decphase(zero);
	delay(0.5*del1 - gt3);

	simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl4, gt3);
	delay(0.5*del1 - gt3);

	decrgpulse(pwC, zero, 0.0, 0.0);
	decpwrf(rfd);
	delay(2.0e-6);
	initval(ncyc, v2);
	starthardloop(v2);
     decrgpulse(4.9*p_d,zero,0.0,0.0);
     decrgpulse(7.9*p_d,two,0.0,0.0);
     decrgpulse(5.0*p_d,zero,0.0,0.0);
     decrgpulse(5.5*p_d,two,0.0,0.0);
     decrgpulse(0.6*p_d,zero,0.0,0.0);
     decrgpulse(4.6*p_d,two,0.0,0.0);
     decrgpulse(7.2*p_d,zero,0.0,0.0);
     decrgpulse(4.9*p_d,two,0.0,0.0);
     decrgpulse(7.4*p_d,zero,0.0,0.0);
     decrgpulse(6.8*p_d,two,0.0,0.0);
     decrgpulse(7.0*p_d,zero,0.0,0.0);
     decrgpulse(5.2*p_d,two,0.0,0.0);
     decrgpulse(5.4*p_d,zero,0.0,0.0);
     decrgpulse(0.6*p_d,two,0.0,0.0);
     decrgpulse(4.5*p_d,zero,0.0,0.0);
     decrgpulse(7.3*p_d,two,0.0,0.0);
     decrgpulse(5.1*p_d,zero,0.0,0.0);
     decrgpulse(7.9*p_d,two,0.0,0.0);

     decrgpulse(4.9*p_d,two,0.0,0.0);
     decrgpulse(7.9*p_d,zero,0.0,0.0);
     decrgpulse(5.0*p_d,two,0.0,0.0);
     decrgpulse(5.5*p_d,zero,0.0,0.0);
     decrgpulse(0.6*p_d,two,0.0,0.0);
     decrgpulse(4.6*p_d,zero,0.0,0.0);
     decrgpulse(7.2*p_d,two,0.0,0.0);
     decrgpulse(4.9*p_d,zero,0.0,0.0);
     decrgpulse(7.4*p_d,two,0.0,0.0);
     decrgpulse(6.8*p_d,zero,0.0,0.0);
     decrgpulse(7.0*p_d,two,0.0,0.0);
     decrgpulse(5.2*p_d,zero,0.0,0.0);
     decrgpulse(5.4*p_d,two,0.0,0.0);
     decrgpulse(0.6*p_d,zero,0.0,0.0);
     decrgpulse(4.5*p_d,two,0.0,0.0);
     decrgpulse(7.3*p_d,zero,0.0,0.0);
     decrgpulse(5.1*p_d,two,0.0,0.0);
     decrgpulse(7.9*p_d,zero,0.0,0.0);

     decrgpulse(4.9*p_d,two,0.0,0.0);
     decrgpulse(7.9*p_d,zero,0.0,0.0);
     decrgpulse(5.0*p_d,two,0.0,0.0);
     decrgpulse(5.5*p_d,zero,0.0,0.0);
     decrgpulse(0.6*p_d,two,0.0,0.0);
     decrgpulse(4.6*p_d,zero,0.0,0.0);
     decrgpulse(7.2*p_d,two,0.0,0.0);
     decrgpulse(4.9*p_d,zero,0.0,0.0);
     decrgpulse(7.4*p_d,two,0.0,0.0);
     decrgpulse(6.8*p_d,zero,0.0,0.0);
     decrgpulse(7.0*p_d,two,0.0,0.0);
     decrgpulse(5.2*p_d,zero,0.0,0.0);
     decrgpulse(5.4*p_d,two,0.0,0.0);
     decrgpulse(0.6*p_d,zero,0.0,0.0);
     decrgpulse(4.5*p_d,two,0.0,0.0);
     decrgpulse(7.3*p_d,zero,0.0,0.0);
     decrgpulse(5.1*p_d,two,0.0,0.0);
     decrgpulse(7.9*p_d,zero,0.0,0.0);

     decrgpulse(4.9*p_d,zero,0.0,0.0);
     decrgpulse(7.9*p_d,two,0.0,0.0);
     decrgpulse(5.0*p_d,zero,0.0,0.0);
     decrgpulse(5.5*p_d,two,0.0,0.0);
     decrgpulse(0.6*p_d,zero,0.0,0.0);
     decrgpulse(4.6*p_d,two,0.0,0.0);
     decrgpulse(7.2*p_d,zero,0.0,0.0);
     decrgpulse(4.9*p_d,two,0.0,0.0);
     decrgpulse(7.4*p_d,zero,0.0,0.0);
     decrgpulse(6.8*p_d,two,0.0,0.0);
     decrgpulse(7.0*p_d,zero,0.0,0.0);
     decrgpulse(5.2*p_d,two,0.0,0.0);
     decrgpulse(5.4*p_d,zero,0.0,0.0);
     decrgpulse(0.6*p_d,two,0.0,0.0);
     decrgpulse(4.5*p_d,zero,0.0,0.0);
     decrgpulse(7.3*p_d,two,0.0,0.0);
     decrgpulse(5.1*p_d,zero,0.0,0.0);
     decrgpulse(7.9*p_d,two,0.0,0.0);
	endhardloop();

        dec2phase(zero);
        decphase(zero);
        txphase(zero);
	decpwrf(rf10);
	delay(tau2);
							  /* WFG3_START_DELAY */
	sim3shaped_pulse("", "offC10", "", 2.0*pw, pwC10, 2.0*pwN, zero, zero, zero, 0.0, 0.0);
        if(pwC10>2.0*pwN) pwZ=0.0; else pwZ=2.0*pwN - pwC10;

	delay(tau2);
	decpwrf(rf0);
                if (mag_flg[A] == 'y')
                {
                   magradpulse(-icosel2*gzcal*gzlvl2, 1.8*gt1);
                }
                else
                {
                   zgradpulse(-icosel2*gzlvl2, 1.8*gt1);
                }
	delay(2.02e-4);

	decrgpulse(2.0*pwC, zero, 0.0, 0.0);

	decpwrf(rf10);
                if (mag_flg[A] == 'y')
                {
                   magradpulse(icosel2*gzcal*gzlvl2, 1.8*gt1);
                }
                else
                {
                   zgradpulse(icosel2*gzlvl2, 1.8*gt1);
                }
	delay(2.0e-4 + WFG3_START_DELAY + pwZ);

	decshaped_pulse("offC10", pwC10, zero, 0.0, 0.0);
	decpwrf(rf0);
	decrgpulse(pwC, zero, 2.0e-6, 0.0);

	zgradpulse(gzlvl5, gt5);
	delay(0.5*del1 - gt5);

	simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	txphase(one);
	decphase(t10);
	delay(0.5*del1 - gt5);

	simpulse(pw, pwC, one, t10, 0.0, 0.0);

	zgradpulse(gzlvl6, gt5);
	txphase(zero);
	decphase(zero);
	delay(0.5*del2 - gt5);

	simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl6, gt5);
	delay(0.5*del2 - gt5);

	simpulse(pw, pwC, zero, zero, 0.0, 0.0);

	delay(0.5*del - 0.5*pwC);

	simpulse(2.0*pw,2.0*pwC, zero, zero, 0.0, 0.0);
        if (mag_flg[A] == 'y')
            magradpulse(gzcal*gzlvl1, gt1);
        else
            zgradpulse(gzlvl1, gt1);
        rcvron();
   if ((STUD[A]=='n') && (dm[C] == 'y'))
        decpower(dpwr);
        if ( dm3[B] == 'y' )   /* turns off 2H decoupling  */
        {
           delay(0.5*del-40.0e-6 -gt1 -1/dmf3);
           setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
           dec3rgpulse(1/dmf3,three,2.0e-6,2.0e-6);
           dec3blank();
           lk_autotrig();   /* resumes lock pulsing */
           lk_sample();
           if (mag_flg[A] == 'y')
            statusdelay(C,40.0e-6  - 2.0*VAGRADIENT_DELAY - POWER_DELAY);
           else
            statusdelay(C,40.0e-6  - 2.0*GRADIENT_DELAY - POWER_DELAY);
        }
      else
        {
         delay(0.5*del-40.0e-6 -gt1);
        if (mag_flg[A] == 'y')
         statusdelay(C,40.0e-6  - 2.0*VAGRADIENT_DELAY - POWER_DELAY);
        else
         statusdelay(C,40.0e-6  - 2.0*GRADIENT_DELAY - POWER_DELAY);
        }
  if ((STUD[A]=='y') && (dm[C] == 'y'))
        {decpower(studlvl);
         decunblank();
         decon();
         decprgon(stCdec,1/stdmf, 1.0);
         startacq(alfa);
         acquire(np, 1.0/sw);
         decprgoff();
         decoff();
         decblank();
        }
 setreceiver(t11);
}		 
Exemple #16
0
void pulsesequence()
{

/* DECLARE AND LOAD VARIABLES */

char        f1180[MAXSTR],   		      /* Flag to start t1 @ halfdwell */
            f2180[MAXSTR],    		      /* Flag to start t2 @ halfdwell */
            mag_flg[MAXSTR],      /* magic-angle coherence transfer gradients */
 	    TROSY[MAXSTR];			    /* do TROSY on N15 and H1 */
 
int         icosel,          			  /* used to get n and p type */
            t1_counter,  		        /* used for states tppi in t1 */
            t2_counter,  	 	        /* used for states tppi in t2 */
            PRexp,                          /* projection-reconstruction flag */
	    ni = getval("ni"),
	    ni2 = getval("ni2");

double      tau1,         				         /*  t1 delay */
            tau2,        				         /*  t2 delay */
	    tauCH = getval("tauCH"), 		         /* 1/4J delay for CH */
	    zeta = getval("zeta"),   /* zeta delay, 0.006 for 1D, 0.011 for 2D*/
            timeTN = getval("timeTN"),     /* constant time for 15N evolution */
	    timeCH = 1.1e-3,				      /* other delays */
	    timeAB = 3.3e-3,
	    kappa = 5.4e-3,
	    lambda = 2.4e-3,
            csa, sna,
            pra = M_PI*getval("pra")/180.0,
        bw, ofs, ppm,                            /* temporary Pbox parameters */            
	pwClvl = getval("pwClvl"), 	        /* coarse power for C13 pulse */
        pwC = getval("pwC"),          /* C13 90 degree pulse length at pwClvl */
	rf0,            	  /* maximum fine power when using pwC pulses */

/* 90 degree pulse at Cab(46ppm), first off-resonance null at CO (174ppm)     */
        pwC1,		              /* 90 degree pulse length on C13 at rf1 */
        rf1,		       /* fine power for 5.1 kHz rf for 600MHz magnet */

/* 180 degree pulse at Cab(46ppm), first off-resonance null at CO(174ppm)     */
        pwC2,		                    /* 180 degree pulse length at rf2 */
        rf2,		      /* fine power for 11.4 kHz rf for 600MHz magnet */

/* the following pulse lengths for SLP pulses are automatically calculated    */
/* by the macro "biocal".  SLP pulse shapes, "offC7" etc are called       */
/* directly from your shapelib.                    			      */
   pwC7,                     /* 180 degree selective sinc pulse on CO(174ppm) */
   rf7,	                           /* fine power for the pwC7 ("offC7") pulse */

   compH = getval("compH"),       /* adjustment for C13 amplifier compression */
   compC = getval("compC"),       /* adjustment for C13 amplifier compression */

   	pwH,	    		        /* H1 90 degree pulse length at tpwr1 */
   	tpwr1,	  	                     /* 9.2 kHz rf magnet for DIPSI-2 */
   	DIPSI2time,     	        /* total length of DIPSI-2 decoupling */
        ncyc_dec,
        waltzB1=getval("waltzB1"),

	pwNlvl = getval("pwNlvl"),	              /* power for N15 pulses */
        pwN = getval("pwN"),          /* N15 90 degree pulse length at pwNlvl */

	sw1 = getval("sw1"),
	sw2 = getval("sw2"),

	gt1 = getval("gt1"),  		       /* coherence pathway gradients */
        gzcal  = getval("gzcal"),            /* g/cm to DAC conversion factor */
	gzlvl1 = getval("gzlvl1"),
	gzlvl2 = getval("gzlvl2"),

	gt0 = getval("gt0"),				   /* other gradients */
	gt3 = getval("gt3"),
	gt4 = getval("gt4"),
	gt5 = getval("gt5"),
	gstab = getval("gstab"),
	gzlvl0 = getval("gzlvl0"),
	gzlvl3 = getval("gzlvl3"),
	gzlvl4 = getval("gzlvl4"),
	gzlvl5 = getval("gzlvl5"),
	gzlvl6 = getval("gzlvl6");

    getstr("f1180",f1180);
    getstr("f2180",f2180);
    getstr("mag_flg",mag_flg);
    getstr("TROSY",TROSY);
 
    csa = cos(pra);
    sna = sin(pra);


/*   LOAD PHASE TABLE    */

	settable(t3,1,phx);
	settable(t4,1,phx);
   if (TROSY[A]=='y')
       {settable(t8,2,phi8T);
	settable(t9,1,phx);
 	settable(t10,1,phy);
	settable(t11,1,phx);
	settable(t12,2,recT);}
    else
       {settable(t8,2,phi8);
	settable(t9,8,phi9);
	settable(t10,1,phx);
	settable(t11,1,phy);
	settable(t12,4,rec);}




/*   INITIALIZE VARIABLES   */

    if( dpwrf < 4095 )
	{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
	  psg_abort(1); }
 
    /* set zeta to 6ms for 1D spectral check, otherwise it will be the    */
    /* value in the dg2 parameter set (about 11ms) for 2D/13C and 3D work */
        if (ni>1)  zeta = zeta;
	else  zeta = 0.006;
	
    /* maximum fine power for pwC pulses */
	rf0 = 4095.0;

      setautocal(); /* activate auto-calibration flags */ 

      if (autocal[0] == 'n') 
      {
    /* 90 degree pulse on Cab, null at CO 128ppm away */
	pwC1 = sqrt(15.0)/(4.0*128.0*dfrq);
        rf1 = 4095.0*(compC*pwC/pwC1);
	rf1 = (int) (rf1 + 0.5);
	
    /* 180 degree pulse on Cab, null at CO 128ppm away */
        pwC2 = sqrt(3.0)/(2.0*128.0*dfrq);
	rf2 = (4095.0*compC*pwC*2.0)/pwC2;
	rf2 = (int) (rf2 + 0.5);	
	if( rf2 > 4295 )
       { printf("increase pwClvl"); psg_abort(1);}
	if(( rf2 < 4296 ) && (rf2>4095)) rf2=4095;
	
    /* 180 degree one-lobe sinc pulse on CO, null at Ca 118m away */
        pwC7 = getval("pwC7");
	rf7 = (compC*4095.0*pwC*2.0*1.65)/pwC7;	/* needs 1.65 times more     */
	rf7 = (int) (rf7 + 0.5);		/* power than a square pulse */
	}
      else        /* if autocal = 'y'(yes), 'q'(quiet), r(read), or 's'(semi) */
      {  
        if(FIRST_FID)                                            /* call Pbox */
        {          
          ppm = getval("dfrq"); 
          bw = 128.0*ppm; ofs = bw;           
          offC1 = pbox_Rcal("square90n", bw, compC*pwC, pwClvl);
          offC2 = pbox_Rcal("square180n", bw, compC*pwC, pwClvl); 
          bw = 118.0*ppm; 
          offC7 = pbox_make("offC7", "sinc180n", bw, ofs, compC*pwC, pwClvl);
          if (dm3[B] == 'y') H2ofs = 3.2;     
          ofs_check(H1ofs, C13ofs, N15ofs, H2ofs); 
        }
        pwC1 = offC1.pw; rf1 = offC1.pwrf;
        pwC2 = offC2.pw; rf2 = offC2.pwrf;
        pwC7 = offC7.pw; rf7 = offC7.pwrf;  

   /* Example of semi-automatic calibration - use parameters, if they exist : 

        if ((autocal[0] == 's') || (autocal[1] == 's'))       
        { 
          if (find("pwC1") > 0) pwC1 = getval("pwC1");
          if (find("rf1") > 0) rf1 = getval("rf1");
        }
   */
      }	
	
    /* power level and pulse times for DIPSI 1H decoupling */
	DIPSI2time = 2.0*zeta + 2.0*timeTN - 5.4e-3 + pwC1 + 5.0*pwN + gt3 + 5.0e-5 + 2.0*GRADIENT_DELAY + 3.0*POWER_DELAY;
        pwH=1.0/(4.0*waltzB1);

	ncyc_dec = (DIPSI2time*90.0)/(pwH*2590.0*4.0);
        ncyc_dec = (int) (ncyc_dec +0.5);

	pwH = (DIPSI2time*90.0)/(ncyc_dec*2590.0*4.0);   /* adjust pwH  */
	tpwr1 = 4095.0*(compH*pw/pwH);
	tpwr1 = (int) (2.0*tpwr1 + 0.5);  /* x2 because obs atten will be reduced by 6dB  */
 
/* CHECK VALIDITY OF PARAMETER RANGES */

    if ( 0.5*ni*1/(sw1) > timeAB - gt4 - WFG_START_DELAY - pwC7 )
       { printf(" ni is too big. Make ni equal to %d or less.\n",
         ((int)((timeAB - gt4 - WFG_START_DELAY - pwC7)*2.0*sw1))); psg_abort(1);}
    PRexp = 0;
    if((pra > 0.0) && (pra < 90.0)) PRexp = 1;

    if (PRexp) 
    {
      if( 0.5*ni*sna/sw1 > timeTN - WFG3_START_DELAY)
        { printf(" ni is too big. Make ni equal to %d or less.\n",
        ((int)((timeTN - WFG3_START_DELAY)*2.0*sw1/sna))); psg_abort(1);}
    }
    else 
    {
      if ( 0.5*ni2*1/(sw2) > timeTN - WFG3_START_DELAY)
       { printf(" ni2 is too big. Make ni2 equal to %d or less.\n", 
         ((int)((timeTN - WFG3_START_DELAY)*2.0*sw2))); psg_abort(1);}
    }

    if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
       { printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}

    if ( dm2[A] == 'y' || dm2[B] == 'y' )
       { printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}

    if ( dm3[A] == 'y' || dm3[C] == 'y' )
       { printf("incorrect dec3 decoupler flags! Should be 'nyn' or 'nnn' ");
							             psg_abort(1);}
    if ( dpwr2 > 50 )
       { printf("dpwr2 too large! recheck value  "); psg_abort(1);}

    if ( pw > 20.0e-6 )
       { printf(" pw too long ! recheck value "); psg_abort(1);} 
  
    if ( pwN > 100.0e-6 )
       { printf(" pwN too long! recheck value "); psg_abort(1);} 
 
    if ( TROSY[A]=='y' && dm2[C] == 'y')
       { text_error("Choose either TROSY='n' or dm2='n' ! "); psg_abort(1);}


/* PHASES AND INCREMENTED TIMES */

/*  Phase incrementation for hypercomplex 2D data, States-Haberkorn element */

    if (phase1 == 2)   tsadd(t3,1,4);  
    if (TROSY[A]=='y')
	 {  if (phase2 == 2)   				      icosel = +1;
            else 	    {tsadd(t4,2,4);  tsadd(t10,2,4);  icosel = -1;}
	 }
    else {  if (phase2 == 2)  {tsadd(t10,2,4); icosel = +1;}
            else 			       icosel = -1;    
	 }


/*  Set up f1180  */
   
    
    if(PRexp)                /* set up Projection-Reconstruction experiment */
      tau1 = d2*csa;
    else
      tau1 = d2;
    if((f1180[A] == 'y') && (ni > 1.0)) 
	{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
    tau1 = tau1/2.0;


/*  Set up f2180  */

    if(PRexp)
      tau2 = d2*sna;
    else
    {
      tau2 = d3;
      if((f2180[A] == 'y') && (ni2 > 1.0)) 
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    }
    tau2 = tau2/2.0;

/* Calculate modifications to phases for States-TPPI acquisition          */

   if( ix == 1) d2_init = d2;
   t1_counter = (int) ( (d2-d2_init)*sw1 + 0.5 );
   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t12,2,4); }

   if( ix == 1) d3_init = d3;
   t2_counter = (int) ( (d3-d3_init)*sw2 + 0.5 );
   if(t2_counter % 2) 
	{ tsadd(t8,2,4); tsadd(t12,2,4); }



/* BEGIN ACTUAL PULSE SEQUENCE */

status(A);
   	delay(d1);
        if ( dm3[B] == 'y' )
          { lk_hold(); lk_sampling_off();}  /*freezes z0 correction, stops lock pulsing*/

	rcvroff();
	obspower(tpwr);
	decpower(pwClvl);
 	dec2power(pwNlvl);
	decpwrf(rf0);
	obsoffset(tof);
	txphase(zero);
   	delay(1.0e-5);
        if (TROSY[A] == 'n')
	dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(gzlvl0, 0.5e-3);
	delay(1.0e-4);
        if (TROSY[A] == 'n')
	dec2rgpulse(pwN, one, 0.0, 0.0);
	decrgpulse(pwC, zero, 0.0, 0.0);
	zgradpulse(0.7*gzlvl0, 0.5e-3);
	delay(5.0e-4);

   	rgpulse(pw,zero,0.0,0.0);                      /* 1H pulse excitation */

   	decphase(zero);
	zgradpulse(gzlvl0, gt0);
	delay(tauCH - gt0);

   	simpulse(2.0*pw, 2.0*pwC, zero, zero, 0.0, 0.0);

   	txphase(one);
	decphase(t3);
	zgradpulse(gzlvl0, gt0);
	delay(tauCH - gt0);

   	rgpulse(pw, one, 0.0, 0.0);
	zgradpulse(gzlvl3, gt3);
	delay(2.0e-4);
      if ( dm3[B] == 'y' )     /* begins optional 2H decoupling */
        {
          gt4=0.0;             /* no gradients during 2H decoupling */
          dec3rgpulse(1/dmf3,one,10.0e-6,2.0e-6);
          dec3unblank();
          dec3phase(zero);
          delay(2.0e-6);
          setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
        }
   	decrgpulse(pwC, t3, 0.0, 0.0);                         	
								/* point a */	
	txphase(zero);
	decphase(zero);
        decpwrf(rf7);
     	delay(tau1);

						        /*  WFG3_START_DELAY  */
	sim3shaped_pulse("", "offC7", "", 0.0, pwC7, 2.0*pwN, zero, zero, zero, 
								     0.0, 0.0);

	zgradpulse(gzlvl4, gt4);
        decpwrf(rf2);	
        if ( pwC7 > 2.0*pwN)
     	   {delay(timeCH - pwC7 - gt4 - WFG3_START_DELAY - 2.0*pw);}
        else
     	   {delay(timeCH - 2.0*pwN - gt4 - WFG3_START_DELAY - 2.0*pw);}

     	rgpulse(2.0*pw,zero,0.0,0.0);

     	delay(timeAB - timeCH);

     	decrgpulse(pwC2, zero, 0.0, 0.0);

	zgradpulse(gzlvl4, gt4);
        decpwrf(rf7);
     	delay(timeAB - tau1 - gt4 - WFG_START_DELAY - pwC7 - 2.0e-6);

 							/*  WFG_START_DELAY   */
     	decshaped_pulse("offC7", pwC7, zero, 0.0, 0.0);
                                                              
	decpwrf(rf1);					       	/* point b */
   	decrgpulse(pwC1, zero, 2.0e-6, 0.0);                   		
	obspwrf(tpwr1); obspower(tpwr-6);				       /* POWER_DELAY */
	obsprgon("dipsi2", pwH, 5.0);		           /* PRG_START_DELAY */
	xmtron();
								/* point c */
	dec2phase(zero);
	decpwrf(rf2);
	delay(zeta - POWER_DELAY - PRG_START_DELAY);

	sim3pulse(0.0, pwC2, 2.0*pwN, zero, zero, zero, 0.0, 0.0); 

	decpwrf(rf1);
	dec2phase(t8);
	delay(zeta);
								/* point d */
	decrgpulse(pwC1, zero, 0.0, 0.0);                        
        if ( dm3[B] == 'y' )   /* turns off 2H decoupling  */
           {
           setstatus(DEC3ch, FALSE, 'c', FALSE, dmf3);
           dec3rgpulse(1/dmf3,three,2.0e-6,2.0e-6);
           dec3blank();
           lk_autotrig();   /* resumes lock pulsing */
           }

/*  xxxxxxxxxxxxxxxxxx    OPTIONS FOR N15 EVOLUTION    xxxxxxxxxxxxxxxxxxxxx  */

	zgradpulse(gzlvl3, gt3);
        if (TROSY[A]=='y') { xmtroff(); obsprgoff(); }
 	delay(2.0e-4);
	dec2rgpulse(pwN, t8, 0.0, 0.0);
								/* point e */

	decpwrf(rf2);
	decphase(zero);
	dec2phase(t9);
	delay(timeTN - WFG3_START_DELAY - tau2);
							 /* WFG3_START_DELAY  */
	sim3pulse(0.0, pwC2, 2.0*pwN, zero, zero, t9, 0.0, 0.0);

	dec2phase(t10);
        decpwrf(rf7);

if (TROSY[A]=='y')
{
    if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
	{
	  txphase(t4);
          delay(timeTN - pwC7 - WFG_START_DELAY);          /* WFG_START_DELAY */
          decshaped_pulse("offC7", pwC7, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')  magradpulse(gzcal*gzlvl1, gt1);
          else  zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);
	}
    else
	{
	  txphase(t4);
          delay(timeTN -pwC7 -WFG_START_DELAY -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else  zgradpulse(gzlvl1, gt1);	   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);                    /* WFG_START_DELAY */
          decshaped_pulse("offC7", pwC7, zero, 0.0, 0.0);
          delay(tau2);
	}
}
else
{
    if (tau2 > kappa)
	{
          delay(timeTN - pwC7 - WFG_START_DELAY);     	   /* WFG_START_DELAY */
          decshaped_pulse("offC7", pwC7, zero, 0.0, 0.0);
          delay(tau2 - kappa - PRG_STOP_DELAY);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  txphase(t4);
          delay(kappa - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);
	}
    else if (tau2 > (kappa - pwC7 - WFG_START_DELAY))
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  txphase(t4);                                     /* WFG_START_DELAY */
          decshaped_pulse("offC7", pwC7, zero, 0.0, 0.0);
          delay(kappa -pwC7 -WFG_START_DELAY -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);
	}
    else if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  txphase(t4);
          delay(kappa - tau2 - pwC7 - WFG_START_DELAY);    /* WFG_START_DELAY */
          decshaped_pulse("offC7", pwC7, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);
	}
    else
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY);
          xmtroff();
	  obsprgoff();					    /* PRG_STOP_DELAY */
	  txphase(t4);
    	  delay(kappa-tau2-pwC7-WFG_START_DELAY-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(gzcal*gzlvl1, gt1);
          else    zgradpulse(gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspwrf(4095.0); obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - 2.0*POWER_DELAY);                    /* WFG_START_DELAY */
          decshaped_pulse("offC7", pwC7, zero, 0.0, 0.0);
          delay(tau2);
	}
}                                                            	/* point f */
/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
	if (TROSY[A]=='y')  rgpulse(pw, t4, 0.0, 0.0);
	else                sim3pulse(pw, 0.0, pwN, t4, zero, t10, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl5, gt5);
	if (TROSY[A]=='y')   delay(lambda - 0.65*(pw + pwN) - gt5);
	else   delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	txphase(one);
	dec2phase(t11);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(pw, 0.0, pwN, one, zero, t11, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl6, gt5);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	dec2phase(t10);
	zgradpulse(gzlvl6, gt5);
	if (TROSY[A]=='y')   delay(lambda - 1.6*pwN - gt5);
	else   delay(lambda - 0.65*pwN - gt5);

	if (TROSY[A]=='y')   dec2rgpulse(pwN, t10, 0.0, 0.0); 
	else    	     rgpulse(pw, zero, 0.0, 0.0); 

	delay((gt1/10.0) + 1.0e-4 +gstab - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);

	rgpulse(2.0*pw, zero, 0.0, rof1);
	dec2power(dpwr2);				       /* POWER_DELAY */
        if (mag_flg[A] == 'y')    magradpulse(icosel*gzcal*gzlvl2, gt1/10.0);
        else   zgradpulse(icosel*gzlvl2, gt1/10.0);            /* 2.0*GRADIENT_DELAY */
        delay(gstab);
        rcvron();
statusdelay(C,1.0e-4 - rof1);
   if (dm3[B]=='y') lk_sample();

	setreceiver(t12);
}		 
Exemple #17
0
pulsesequence()
{
 char    
    f1180[MAXSTR],    
    f2180[MAXSTR],
    mag_flg[MAXSTR];  /* y for magic angle, n for z-gradient only  */

 int        
    icosel,
    t1_counter,   
    t2_counter;   

 double      
    ni2,  
    ratio,        /* used to adjust t1 semi-constant time increment */
    tau1,       
    tau2,       
    taua,         /*  ~ 1/4JCH =  1.5 ms - 1.7 ms]        */
    taub,         /*  ~ 3.3 ms          */
    bigTC,        /*  ~ 8 ms            */
    bigTCO,       /*  ~ 6 ms           */
    bigTN,        /*  ~ 12 ms           */
    tauc,         /*  ~ 5.4 ms          */
    taud,         /*  ~ 2.3 ms          */
    gstab,         /*  ~0.2 ms, gradient recovery time     */

    pwClvl,   /* High power level for carbon on channel 2 */
    pwC,      /* C13 90 degree pulse length at pwClvl     */

    compH,     /* Compression factor for H1 on channel 1  */
    compC,     /* Compression factor for C13 on channel 2  */
    pwNlvl,   /* Power level for Nitrogen on channel 3    */
    pwN,      /* N15 90 degree pulse lenght at pwNlvl     */
    maxpwCN,
    bw, ofs, ppm, /* bandwidth, offset, ppm - temporary Pbox parameters */
    pwCa90,   /*90 "offC13" pulse at Ca(56ppm) xmtr at CO(174ppm) */
    pwCa180,  /*180 "offC17" pulse at Ca(56ppm) xmtr at CO(174ppm) */
    pwCO90,   /* 90 "offC6" pulse at CO(174ppm) xmtr at CO(174ppm)*/
    pwCO180,  /* 180 "offC8" pulse at CO(174ppm) xmtr at CO(174ppm)*/
    pwCab180, /* 180 "offC27" pulse at Cab(46ppm) xmtr at CO(174ppm)*/

    tpwrHd,   /* Power level for proton decoupling on channel 1  */
    pwHd,     /* H1 90 degree pulse lenth at tpwrHd.             */
    waltzB1 = getval("waltzB1"),  /* waltz16 field strength (in Hz)     */

    phi_CO,   /* phase correction for Bloch-Siegert effect on CO */
    phi_Ca,   /* phase correction for Bloch-Siegert effect on Ca */

    gt1,
    gt2,
    gt3,
    gt4, 
    gt5,
    gt6,
    gt7,
    gt0,

    gzlvl1,  
    gzlvl2,   
    gzlvl3,
    gzlvl4, 
    gzlvl5,
    gzlvl6,   /* N15 selection gradient level in DAC units */
    gzlvl7,
    gzlvl0,   /* H1 gradient level in DAC units            */
    gzcal,    /* gradient calibration (gcal)               */
    dfCa180,
    dfCab180,
    dfC90,
    dfCa90,
    dfCO180;
 
         
/* LOAD VARIABLES */

    getstr("f1180",f1180);
    getstr("f2180",f2180);
    getstr("mag_flg", mag_flg);

    gzcal  = getval("gzcal");
      ni2  = getval("ni2");
    taua   = getval("taua"); 
    taub   = getval("taub");
    tauc = getval("tauc");
    bigTC = getval("bigTC");
    bigTCO = getval("bigTCO");
    bigTN = getval("bigTN");
    taud = getval("taud");
    gstab = getval("gstab");
  
    pwClvl = getval("pwClvl");
    pwC = getval("pwC");
    compH = getval("compH");
    compC = getval("compC");

    pwNlvl = getval("pwNlvl");
    pwN = getval("pwN");

    phi_CO = getval("phi_CO");
    phi_Ca = getval("phi_Ca");

    gt1 = getval("gt1");
    gt2 = getval("gt2");
    gt3 = getval("gt3");
    gt4 = getval("gt4");
    gt5 = getval("gt5");
    gt6 = getval("gt6");
    gt7 = getval("gt7");
    gt0 = getval("gt0");
 
    gzlvl1 = getval("gzlvl1");
    gzlvl2 = getval("gzlvl2");
    gzlvl3 = getval("gzlvl3");
    gzlvl4 = getval("gzlvl4");
    gzlvl5 = getval("gzlvl5");
    gzlvl6 = getval("gzlvl6");
    gzlvl7 = getval("gzlvl7");
    gzlvl0 = getval("gzlvl0");

    setautocal();                        /* activate auto-calibration flags */ 
        
    if (autocal[0] == 'n') 
    { 
      pwCa90 = getval("pwCa90");
      pwCa180 = getval("pwCa180");
      pwCab180 = getval("pwCab180");
      pwCO90 = getval("pwCO90");
      pwCO180 = getval("pwCO180");

      dfCa180 = (compC*4095.0*pwC*2.0*1.69)/pwCa180;           /*power for "offC17" pulse*/
      dfCab180 = (compC*4095.0*pwC*2.0*1.69)/pwCab180;       /*power for "offC27" pulse*/
      dfC90  = (compC*4095.0*pwC*1.69)/pwCO90;                  /*power for "offC6" pulse */
      dfCa90  = (compC*4095.0*pwC)/pwCa90;                     /*power for "offC13" pulse*/
      dfCO180  = (compC*4095.0*pwC*2.0*1.65)/pwCO180;          /*power for "offC8" pulse */

      dfCa90 = (int) (dfCa90 + 0.5);
      dfCa180 = (int) (dfCa180 + 0.5);
      dfC90 = (int) (dfC90 + 0.5);
      dfCO180 = (int) (dfCO180 + 0.5);	
      dfCab180 = (int) (dfCab180 +0.5);

    /* power level and pulse time for WALTZ 1H decoupling */
	pwHd = 1/(4.0 * waltzB1) ;                          
	tpwrHd = tpwr - 20.0*log10(pwHd/(compH*pw));
	tpwrHd = (int) (tpwrHd + 0.5);
    }
    else
    {
      if(FIRST_FID)                                            /* call Pbox */
      {
        ppm = getval("dfrq"); bw = 118.0*ppm; ofs = -118.0*ppm;
        offC6 = pbox_make("offC6", "sinc90n", bw, 0.0, compC*pwC, pwClvl);
        offC8 = pbox_make("offC8", "sinc180n", bw, 0.0, compC*pwC, pwClvl);
        offC17 = pbox_make("offC17", "sinc180n", bw, ofs, compC*pwC, pwClvl);
        bw = 128.0*ppm;
        offC13 = pbox_make("offC13", "square90n", bw, ofs, compC*pwC, pwClvl);
        ofs = -128.0*ppm;
        offC27 = pbox_make("offC27", "sinc180n", bw, ofs, compC*pwC, pwClvl);
        bw = 2.8*7500.0;
        wz16 = pbox_Dcal("WALTZ16", 2.8*waltzB1, 0.0, compH*pw, tpwr);

        ofs_check(H1ofs, C13ofs, N15ofs, H2ofs);
      } 
      dfC90 = offC6.pwrf;      pwCO90 = offC6.pw;
      dfCO180 = offC8.pwrf;    pwCO180 = offC8.pw;
      dfCa90 = offC13.pwrf;    pwCa90 = offC13.pw;
      dfCa180 = offC17.pwrf;   pwCa180 = offC17.pw;
      dfCab180 = offC27.pwrf;  pwCab180 = offC27.pw;
      tpwrHd = wz16.pwr;       pwHd = 1.0/wz16.dmf;
    }

    maxpwCN = 2.0*pwN;
    if (pwCab180 > pwN) maxpwCN = pwCab180;

/* LOAD PHASE TABLE */

    settable(t1,4,phi1);
    settable(t2,2,phi2);
    settable(t3,8,phi3);
    settable(t4,16,phi4);
    settable(t5,1,phi5);
   
    settable(t16,8,rec); 

/* CHECK VALIDITY OF PARAMETER RANGES */
   
    if(ni > 64)
    {
       printf("ni is out of range. Should be: 14 to 64 ! \n");
       psg_abort(1);
    }
/*
    if(ni/sw1 > 2.0*(bigTCO))
    {
       printf("ni is too big, should be < %f\n", sw1*2.0*(bigTCO));
       psg_abort(1);
    }
*/

    if(ni2/sw2 > 2.0*(bigTN - pwCO180))
    {
       printf("ni2 is too big, should be < %f\n",2.0*sw2*(bigTN-pwCO180));
       psg_abort(1);
    }

    if((dm[A] == 'y' || dm[B] == 'y' ))
    {
       printf("incorrect dec1 decoupler flags! Should be 'nnn' ");
       psg_abort(1);
    }

    if((dm2[A] == 'y' || dm2[B] == 'y'))
    {
       printf("incorrect dec2 decoupler flags! Should be 'nny' ");
       psg_abort(1);
    }


    if( dpwr > 50 )
    {
        printf("don't fry the probe, DPWR too large!  ");
        psg_abort(1);
    }

/*  Phase incrementation for hypercomplex 2D data */

    if (phase1 == 1) 
    {
       tsadd(t1, 1, 4);   
    }

    if (phase2 == 2)
    {
       tsadd(t5,2,4);
       icosel = 1; 
    }
    else icosel = -1;

   
/*  Set up f1180  tau1 = t1               */
      
    tau1 = d2;
    if ((f1180[A] == 'y') && (ni > 1))
      { tau1 += (1.0/(2.0*sw1)); }
    if(tau1 < 0.2e-6) tau1 = 0.0;
    tau1 = tau1/4.0;

    ratio = 2.0*bigTCO*sw1/((double) ni);
    ratio = (double)((int)(ratio*100.0))/100.0;
    if (ratio > 1.0) ratio = 1.0;
    if((dps_flag) && (ni > 1)) 
        printf("ratio = %f => %f\n",2.0*bigTCO*sw1/((double) ni), ratio);

/*  Set up f2180  tau2 = t2               */
    tau2 = d3;
    if ((f2180[A] == 'y') && (ni2 > 1))
      { tau2 += (1.0/(2.0*sw2)); }
    if(tau2 < 0.2e-6) tau2 = 0.0;
    tau2 = tau2/4.0;
 

/* Calculate modifications to phases for States-TPPI acquisition  */

    if( ix == 1) d2_init = d2 ;
    t1_counter = (int)((d2-d2_init)*sw1 + 0.5);
    
    if((t1_counter % 2)) 
    {
       tsadd(t1,2,4);     
       tsadd(t16,2,4);    
    }

    if( ix == 1) d3_init = d3 ;
    t2_counter = (int)((d3-d3_init)*sw2 + 0.5);
    if((t2_counter % 2)) 
    {
       tsadd(t2,2,4);  
       tsadd(t16,2,4);    
    }

    decstepsize(1.0);
    initval(phi_CO, v1);
    initval(phi_Ca, v2);

/* BEGIN ACTUAL PULSE SEQUENCE */

status(A);
   	delay(d1-1.0e-3);
    obsoffset(tof);
    decoffset(dof);
    obspower(tpwr);        
    decpower(pwClvl);
    decpwrf(4095.0);
    dec2power(pwNlvl);
    txphase(zero);
    decphase(zero);
    dec2phase(zero);
    rcvroff();

    if(gt6 > 0.2e-6)
    {
       delay(10.0e-6);
       decrgpulse(pwC, zero, 1.0e-6, 1.0e-6);
       delay(0.2e-6);
       zgradpulse(gzlvl6, gt6);
    }  
    decpwrf(dfCa180); 
    delay(1.0e-3);

    rgpulse(pw,zero,1.0e-6,1.0e-6);            
    delay(2.0e-6);
    zgradpulse(gzlvl0,gt0);  
    delay(taua - gt0 - 2.0e-6 - WFG_START_DELAY);

    simshaped_pulse("","offC17",2.0*pw,pwCa180,zero,zero,1.0e-6,1.0e-6);
      /* c13 offset on CO, slp 180 on Ca */
    delay(taua - gt0 - 500.0e-6 - WFG_STOP_DELAY);
    zgradpulse(gzlvl0,gt0); 
    txphase(one);
    delay(500.0e-6);
    rgpulse(pw, one, 1.0e-6, 1.0e-6);
    decphase(zero);
  
    delay(2.0e-6);
    zgradpulse(gzlvl3,gt3);

    obspower(tpwrHd);
    decpwrf(dfCa90);
    delay(200.0e-6);
   

/* c13 offset on CO, slp 90 on Ca */
    decshaped_pulse("offC13", pwCa90, zero, 0.0, 0.0);
    delay(taub -PRG_START_DELAY);

    obsprgon("waltz16", pwHd, 180.0);
    xmtron();

    decpwrf(dfC90);
    decphase(t1);
    delay(bigTC -taub -SAPS_DELAY -PWRF_DELAY);

/* c13 offset on CO, on-res 90 on CO */
    decshaped_pulse("offC6", pwCO90, t1, 0.0, 0.0);
/* CO EVOLUTION BEGINS */

    decpwrf(dfCO180);
    decphase(zero);
    delay(bigTCO/2.0 +maxpwCN/2.0 +WFG_STOP_DELAY -2.0*pwCO90/PI -ratio*tau1);

/* c13 offset on CO, on-res 180 on CO */
    decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0);

    decpwrf(dfCab180);
    delay(bigTCO/2.0 +(2.0 -ratio)*tau1 -PRG_STOP_DELAY);
    xmtroff();
    obsprgoff();

/* c13 offset on CO, slp 180 at Cab */
    sim3shaped_pulse("","offC27","",0.0,pwCab180,2.0*pwN,zero,zero,zero,0.0,0.0); 

    obsprgon("waltz16", pwHd, 180.0);
    xmtron();
    decpwrf(dfCO180);
    delay(bigTCO/2.0 +(2.0 -ratio)*tau1 -PRG_START_DELAY);

/* c13 offset on CO, on-res 180 on CO */
    decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0);

    decpwrf(dfC90);
    dcplrphase(v1);  
    delay(bigTCO/2.0 +maxpwCN/2.0 +WFG_STOP_DELAY -2.0*pwCO90/PI -ratio*tau1 -SAPS_DELAY);

/* CO EVOLUTION ENDS */
    decshaped_pulse("offC6", pwCO90, zero, 0.0, 0.0);
/* c13 offset on CO, on-res 90 on CO */

    decpwrf(dfCa90);
    decphase(t3); dcplrphase(v2);
    delay(bigTC -2.0*SAPS_DELAY -PWRF_DELAY);

/* c13 offset on CO, slp 90 at Ca */
    decshaped_pulse("offC13", pwCa90, t3, 0.0, 0.0);

    xmtroff();

    decpwrf(dfCO180);
    decphase(zero); dcplrphase(zero);
    dec2phase(t2);   

    delay(2.0e-5);
    zgradpulse(gzlvl4,gt4);
    delay(2.0e-6);

    obsprgon("waltz16", pwHd, 180.0);
    xmtron();
    txphase(zero);
    delay(150.0e-6);

    dec2rgpulse(pwN, t2, 0.0, 0.0);
/* N15 EVOLUTION BEGINS HERE */

    delay(bigTN/2.0 -tau2);

    decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0); /* c13 offset on CO, on-res 180 on CO */

    decpwrf(dfCa180);
    dec2phase(t4);
    delay(bigTN/2.0 -tau2);
 
    dec2rgpulse(2.0*pwN, t4, 0.0, 0.0);
    decshaped_pulse("offC17", pwCa180, zero, 0.0, 0.0); /* c13 offset on CO, slp 180 at Ca */

    decpwrf(dfCO180);
    delay(bigTN/2.0 +tau2 -pwCa180 -WFG_START_DELAY -WFG_STOP_DELAY);

    decshaped_pulse("offC8", pwCO180, zero, 0.0, 0.0);
       /* c13 offset on CO, on-res 180 on CO */

    delay(bigTN/2.0 +tau2 -tauc -PRG_STOP_DELAY);
    dec2phase(t5);
    xmtroff();
    obsprgoff();
    obspower(tpwr);

    if (mag_flg[A] == 'y') magradpulse(gzcal*gzlvl1, gt1);
      else zgradpulse(gzlvl1, gt1);

    delay(tauc -gt1 -2.0*GRADIENT_DELAY);
  
/* N15 EVOLUTION ENDS HERE */
    sim3pulse(pw,0.0, pwN, zero,zero, t5, 0.0, 0.0);

    dec2phase(zero);
    delay(2.0e-6);
    zgradpulse(0.8*gzlvl5, gt5);
    delay(taud - gt5 - 2.0e-6);

    sim3pulse(2.0*pw,0.0, 2.0*pwN, zero,zero, zero, 0.0, 0.0);

    delay(taud - gt5 - 500.0e-6);
    zgradpulse(0.8*gzlvl5, gt5);
    txphase(one);
    decphase(one);
    delay(500.0e-6);

    sim3pulse(pw,0.0, pwN, one,zero, one, 0.0, 0.0);
    
    delay(2.0e-6);
    txphase(zero);
    decphase(zero);
    zgradpulse(gzlvl5, gt5);
    delay(taud - gt5 - 2.0e-6);
    sim3pulse(2.0*pw,0.0, 2.0*pwN, zero,zero, zero, 0.0, 0.0);
  
    delay(taud - gt5 - 2.0*POWER_DELAY - 500.0e-6);
    zgradpulse(gzlvl5, gt5);
    decpower(dpwr);
    dec2power(dpwr2);
    delay(500.0e-6);

    rgpulse(pw, zero, 0.0, 0.0);

    delay(gstab +gt2 +2.0*GRADIENT_DELAY);

    rgpulse(2.0*pw, zero, 0.0, 0.0);

    if (mag_flg[A] == 'y') magradpulse(icosel*gzcal*gzlvl2, gt2);
      else zgradpulse(icosel*gzlvl2, gt2);  

    delay(0.5*gstab);    

    rcvron();
statusdelay(C, 0.5*gstab);
    setreceiver(t16);
}
Exemple #18
0
void pulsesequence()
{



/* DECLARE AND LOAD VARIABLES */

char        f1180[MAXSTR],   		      /* Flag to start t1 @ halfdwell */
            f2180[MAXSTR],    		      /* Flag to start t2 @ halfdwell */
            mag_flg[MAXSTR],      /* magic-angle coherence transfer gradients */
 	    TROSY[MAXSTR],			    /* do TROSY on N15 and H1 */
	    CT_c[MAXSTR],
	    h1dec[MAXSTR];
 
int         icosel,          			  /* used to get n and p type */
            t1_counter=getval("t1_counter"),      /* used for states tppi in t1 */
            t2_counter=getval("t2_counter"),      /* used for states tppi in t2 */
            nli = getval("nli"),
            nli2 = getval("nli2");

double      tau1,         				         /*  t1 delay */
            tau2,        				         /*  t2 delay */
	    tauCC = 7.0e-3, 		   /* delay for Ca to Cb cosy */
	    tauC = 13.3e-3,	           /* constantTime for 13Cb evolution */
            timeTN = getval("timeTN"),     /* constant time for 15N evolution */
	    kappa = 5.4e-3,
	    lambda = 2.4e-3,
	    zeta = 3.0e-3,
	    taud = 1.7e-3,
            
	pwClvl = getval("pwClvl"), 	        /* coarse power for C13 pulse */
        pwC = getval("pwC"),          /* C13 90 degree pulse length at pwClvl */
	rf0,            	  /* maximum fine power when using pwC pulses */

/* 90 degree pulse at Cab (46ppm), first off-resonance null at CO (174ppm)    */
        pwC1,		              /* 90 degree pulse length on C13 at rf1 */
        rf1,		       /* fine power for 5.1 kHz rf for 600MHz magnet */

/* 180 degree pulse at Ca (46ppm), first off-resonance null at CO(174ppm)     */
        pwC2,		                    /* 180 degree pulse length at rf2 */
        rf2,		      /* fine power for 11.4 kHz rf for 600MHz magnet */

/* the following pulse lengths for SLP pulses are automatically calculated    */
/* by the macro "proteincal".  SLP pulse shapes, "offC7" etc are called       */
/* directly from your shapelib.                    			      */
   pwC7 = getval("pwC7"),  /*180 degree pulse at CO(174ppm) null at Ca(56ppm) */
   pwC7a = getval("pwC7a"),    /* pwC7a=pwC7, but not set to zero when pwC7=0 */
   phshift7,            /* phase shift induced on Cab by pwC7 ("offC7") pulse */
   pwZ,					   /* the largest of pwC7 and 2.0*pwN */
   pwZ1,                /* the larger of pwC7a and 2.0*pwN for 1D experiments */
   rf7,	                           /* fine power for the pwC7 ("offC7") pulse */

/* the following pulse lengths for SLP pulses are automatically calculated    */
/* by the macro "proteincal".  SLP pulse shapes, "offC5" etc are called       */
/* directly from your shapelib.                                               */
   pwC5 = getval("pwC5"),  /*180 degree pulse at CO(174ppm) null at Ca(56ppm) */
   rf5,                            /* fine power for the pwC7 ("offC7") pulse */

/* g3 inversion pulse in the t1 period (centred at 150ppm)                     */
	pwCgCO_lvl = getval("pwCgCO_lvl"),
	pwCgCO = getval("pwCgCO"),



   compH = getval("compH"),       /* adjustment for C13 amplifier compression */
   compC = getval("compC"),       /* adjustment for C13 amplifier compression */

   	pwHs = getval("pwHs"),	        /* H1 90 degree pulse length at tpwrs */
   	tpwrs,	  	              /* power for the pwHs ("H2Osinc") pulse */

   	pwHd,	    		        /* H1 90 degree pulse length at tpwrd */
   	tpwrd,	  	                   /* rf for WALTZ decoupling */
        waltzB1 = getval("waltzB1"),  /* waltz16 field strength (in Hz)     */

	pwNlvl = getval("pwNlvl"),	              /* power for N15 pulses */
        pwN = getval("pwN"),          /* N15 90 degree pulse length at pwNlvl */

	sw1 = getval("sw1"),
	sw2 = getval("sw2"),

        gstab = getval("gstab"),
	gt1 = getval("gt1"),  		       /* coherence pathway gradients */
        gzcal = getval("gzcal"),             /* g/cm to DAC conversion factor */
	gzlvl1 = getval("gzlvl1"),
	gzlvl2 = getval("gzlvl2"),

	gt0 = getval("gt0"),				   /* other gradients */
	gt3 = getval("gt3"),
	gt4 = getval("gt4"),
	gt5 = getval("gt5"),
	gt7 = getval("gt7"),
	gt8 = getval("gt8"),
	gzlvl0 = getval("gzlvl0"),
	gzlvl3 = getval("gzlvl3"),
	gzlvl4 = getval("gzlvl4"),
	gzlvl5 = getval("gzlvl5"),
	gzlvl6 = getval("gzlvl6"),
	gzlvl7 = getval("gzlvl7"),
	gzlvl8 = getval("gzlvl8");

    getstr("f1180",f1180);
    getstr("f2180",f2180);
    getstr("mag_flg",mag_flg);
    getstr("TROSY",TROSY);
    getstr("CT_c",CT_c);
    getstr("h1dec",h1dec);



/*   LOAD PHASE TABLE    */

	settable(t2,1,phy);
	settable(t3,2,phi3);
	settable(t4,1,phx);
	settable(t5,4,phi5);
   if (TROSY[A]=='y')
       {settable(t8,1,phy);
	settable(t9,1,phx);
 	settable(t10,1,phy);
	settable(t11,1,phx);
	settable(t12,4,recT);}
    else
       {settable(t8,1,phx);
	settable(t9,8,phi9);
	settable(t10,1,phx);
	settable(t11,1,phy);
	settable(t12,4,rec);}




/*   INITIALIZE VARIABLES   */

    if( dpwrf < 4095 )
	{ printf("reset dpwrf=4095 and recalibrate C13 90 degree pulse");
	  psg_abort(1); }

    /* maximum fine power for pwC pulses */
	rf0 = 4095.0;

    /* 90 degree pulse on Cab, null at CO 128ppm away */
	pwC1 = sqrt(15.0)/(4.0*128.0*dfrq);
        rf1 = (compC*4095.0*pwC)/pwC1;
	rf1 = (int) (rf1 + 0.5);

    /* 180 degree pulse on Cab, null at CO 128ppm away */
        pwC2 = sqrt(3.0)/(2.0*128.0*dfrq);
	rf2 = (4095.0*compC*pwC*2.0)/pwC2;
	rf2 = (int) (rf2 + 0.5);	
	if( rf2 > 4095 )
	      { printf("Recalibrate so that C13 90 <22us*600/sfrq"); psg_abort(1);}

    /* 180 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
	rf7 = (compC*4095.0*pwC*2.0*1.65)/pwC7a; /* needs 1.65 times more     */
	rf7 = (int) (rf7 + 0.5);		 /* power than a square pulse */

    /* 90 degree one-lobe sinc pulse on CO, null at Ca 118ppm away */
        rf5 = (compC*4095.0*pwC*1.69)/pwC5;     /* needs 1.69 times more     */
        rf5 = (int) (rf5 + 0.5);                /* power than a square pulse */

    /* the pwC7 pulse at the middle of t1  */
        if ((nli2 > 0.0) && (nli == 1.0)) nli = 0.0;
        if (pwC7a > 2.0*pwN) pwZ = pwC7a; else pwZ = 2.0*pwN;
        if ((pwC7==0.0) && (pwC7a>2.0*pwN)) pwZ1=pwC7a-2.0*pwN; else pwZ1=0.0;
	if ( nli > 1 )     pwC7 = pwC7a;
	if ( pwC7 > 0 )   phshift7 = 320.0;
	else              phshift7 = 0.0;
	
    /* selective H20 one-lobe sinc pulse */
    tpwrs = tpwr - 20.0*log10(pwHs/(compH*pw*1.69)); /* needs 1.69 times more */
    tpwrs = (int) (tpwrs);                       /* power than a square pulse */

    /* power level and pulse time for WALTZ 1H decoupling */
	pwHd = 1/(4.0 * waltzB1) ;                          
	tpwrd = tpwr - 20.0*log10(pwHd/(compH*pw));
	tpwrd = (int) (tpwrd + 0.5);
 


/* CHECK VALIDITY OF PARAMETER RANGES */


    if ( 0.5*nli2*1/(sw2) > timeTN - WFG3_START_DELAY)
       { printf(" nli2 is too big. Make nli2 equal to %d or less.\n", 
  	 ((int)((timeTN - WFG3_START_DELAY)*2.0*sw2))); psg_abort(1);}

    if ( dm[A] == 'y' || dm[B] == 'y' || dm[C] == 'y' )
       { printf("incorrect dec1 decoupler flags! Should be 'nnn' "); psg_abort(1);}

    if ( dm2[A] == 'y' || dm2[B] == 'y' )
       { printf("incorrect dec2 decoupler flags! Should be 'nny' "); psg_abort(1);}

    if ( dm3[A] == 'y' || dm3[C] == 'y' )
       { printf("incorrect dec3 decoupler flags! Should be 'nyn' or 'nnn' ");
							             psg_abort(1);}	
    if ( dpwr2 > 46 )
       { printf("dpwr2 too large! recheck value  "); psg_abort(1);}

    if ( pw > 20.0e-6 )
       { printf(" pw too long ! recheck value "); psg_abort(1);} 
  
    if ( pwN > 100.0e-6 )
       { printf(" pwN too long! recheck value "); psg_abort(1);} 
 
    if ( TROSY[A]=='y' && dm2[C] == 'y')
       { text_error("Choose either TROSY='n' or dm2='n' ! "); psg_abort(1);}



/* PHASES AND INCREMENTED TIMES */

/*  Phase incrementation for hypercomplex 2D data, States-Haberkorn element */

    if (phase1 == 2)   { tsadd(t3,1,4); tsadd(t2,1,4);} 
    if (TROSY[A]=='y')
	 {  if (phase2 == 2)   				      icosel = +1;
            else 	    {tsadd(t4,2,4);  tsadd(t10,2,4);  icosel = -1;}
	 }
    else {  if (phase2 == 2)  {tsadd(t10,2,4); icosel = +1;}
            else 			       icosel = -1;    
	 }


/*  Set up f1180  */
   
    if( ix == 1) d2_init = d2;
    tau1 = d2_init + (t1_counter) / sw1;
    if((f1180[A] == 'y') && (nli > 1.0)) 
	{ tau1 += ( 1.0 / (2.0*sw1) ); if(tau1 < 0.2e-6) tau1 = 0.0; }
    tau1 = tau1/2.0;


/*  Set up f2180  */

    if( ix == 1) d3_init = d3;
    tau2 = d3_init + (t2_counter) / sw2;
    if((f2180[A] == 'y') && (nli2 > 1.0)) 
	{ tau2 += ( 1.0 / (2.0*sw2) ); if(tau2 < 0.2e-6) tau2 = 0.0; }
    tau2 = tau2/2.0;



/* Calculate modifications to phases for States-TPPI acquisition          */

   if(t1_counter % 2) 
	{ tsadd(t3,2,4); tsadd(t12,2,4); }

   if(t2_counter % 2) 
	{ tsadd(t8,2,4); tsadd(t12,2,4); }



/* BEGIN PULSE SEQUENCE */

status(A);
delay(d1);
if (dm3[B] == 'y') lk_hold();

rcvroff();
obspower(tpwr);
decpower(pwClvl);
dec2power(pwNlvl);
decpwrf(rf0);
obsoffset(tof);
txphase(zero);
decphase(zero);
dcplrphase(zero);
delay(1.0e-5);

dec2rgpulse(pwN, zero, 0.0, 0.0);  /*destroy N15 and C13 magnetization*/
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(gzlvl0, 0.5e-3);
delay(1.0e-4);
dec2rgpulse(pwN, one, 0.0, 0.0);
decrgpulse(pwC, zero, 0.0, 0.0);
zgradpulse(0.7*gzlvl0, 0.5e-3);
delay(5.0e-4);

rgpulse(pw,zero,0.0,0.0);                      /* 1H pulse excitation */

dec2phase(zero);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);

sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

txphase(one);
zgradpulse(gzlvl0, gt0);
delay(lambda - gt0);

rgpulse(pw, one, 0.0, 0.0);

obspower(tpwrs);
if (TROSY[A]=='y') {
  txphase(two);
  shaped_pulse("H2Osinc", pwHs, two, 5.0e-4, 0.0);
  obspower(tpwr);
  zgradpulse(gzlvl3, gt3);
  delay(2.0e-4);
  dec2rgpulse(pwN, zero, 0.0, 0.0);

  delay(0.5*kappa - 2.0*pw);

  rgpulse(2.0*pw, two, 0.0, 0.0);

  obspower(tpwrd);	  				       /* POWER_DELAY */
  decphase(zero);
  dec2phase(zero);
  decpwrf(rf7);
  delay(timeTN - 0.5*kappa - POWER_DELAY -WFG_START_DELAY);
}
else {
  txphase(zero);
  shaped_pulse("H2Osinc", pwHs, zero, 5.0e-4, 0.0);
  obspower(tpwrd);
  zgradpulse(gzlvl3, gt3);
  delay(2.0e-4);
  dec2rgpulse(pwN, zero, 0.0, 0.0);

  txphase(one);
  delay(kappa - pwHd - 2.0e-6 - PRG_START_DELAY);

  rgpulse(pwHd,one,0.0,0.0);
  txphase(zero);
  delay(2.0e-6);
  obsprgon("waltz16", pwHd, 90.0);	          /* PRG_START_DELAY */
  xmtron();
  decphase(zero);
  dec2phase(zero);
  decpwrf(rf7);
  delay(timeTN - kappa -WFG_START_DELAY);
}

sim3shaped_pulse("","offC7","",0.0, pwC7, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

decphase(t3);
decpwrf(rf5);
delay(timeTN -WFG_STOP_DELAY -pwHd);

dec2rgpulse(pwN, zero, 0.0, 0.0);

if (TROSY[A]=='n') {
  xmtroff();
  obsprgoff();
  rgpulse(pwHd,three,2.0e-6,0.0);
}

delay(2.0e-6);
zgradpulse(gzlvl3, gt3);
delay(2.0e-4);

decpwrf(rf5); 
decshaped_pulse("offC5", pwC5, zero, 0.0, 0.0);
delay(2.0e-6);

zgradpulse(-gzlvl7, gt7);
decpwrf(rf0);
decphase(zero);
delay(zeta - gt7 - 0.5*10.933*pwC-2.0e-6);

  decrgpulse(pwC*158.0/90.0, zero, 0.0, 0.0);
  decrgpulse(pwC*171.2/90.0, two, 0.0, 0.0);
  decrgpulse(pwC*342.8/90.0, zero, 0.0, 0.0);      /* Shaka 6 composite */
  decrgpulse(pwC*145.5/90.0, two, 0.0, 0.0);
  decrgpulse(pwC*81.2/90.0, zero, 0.0, 0.0);
  decrgpulse(pwC*85.3/90.0, two, 0.0, 0.0);

delay(2.0e-6);
zgradpulse(-gzlvl7, gt7);
decpwrf(rf5);
decphase(one);
txphase(one);
delay(zeta - gt7 - 0.5*10.933*pwC - WFG_START_DELAY-2.0e-6);
                                                           /* WFG_START_DELAY */
decshaped_pulse("offC5", pwC5, one, 0.0, 0.0);

delay(2.0e-6);
zgradpulse(1.33*gzlvl3,gt3);
delay(200.0e-6);

if(dm3[B] == 'y'){                        /*optional 2H decoupling on */
  dec3unblank();
  dec3rgpulse(1/dmf3, one, 0.0, 0.0);
  dec3unblank();
  setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
}

decpwrf(rf1);
decphase(t2);
txphase(one);

if (h1dec[A]=='y') {
  rgpulse(pwHd,one,0.0,0.0);
  txphase(zero);
  delay(2.0e-6);
  obsprgon("waltz16", pwHd, 90.0);                   /* PRG_START_DELAY */
  xmtron();
}

decrgpulse(pwC1, t3, 0.0, 0.0);
decphase(zero);

decpwrf(rf2);
delay(tauCC -gt5 -202.0e-6 -POWER_DELAY- pwHd -PRG_STOP_DELAY -1/dmf3
                                            -2.0e-6 - WFG_STOP_DELAY);

if(dm3[B] == 'y') {                     /*optional 2H decoupling off */
  dec3rgpulse(1/dmf3, three, 0.0, 0.0);
  dec3blank();
  setstatus(DEC3ch, FALSE, 'w', FALSE, dmf3);
  dec3blank();
}
else delay(1/dmf3 +WFG_STOP_DELAY);
 
if(h1dec[A]=='y') {
  xmtroff();
  obsprgoff();                                        /* PRG_STOP_DELAY */
  rgpulse(pwHd,three,2.0e-6,0.0);
}
else delay(pwHd +2.0e-6 +PRG_STOP_DELAY);
  
delay(2.0e-6);
zgradpulse(-gzlvl5, gt5);
delay(200.0e-6);

decrgpulse(pwC2,zero,0.0,0.0);

delay(2.0e-6);
zgradpulse(-gzlvl5, gt5);
delay(200.0e-6);
decpwrf(rf1);

if(h1dec[A]=='y'){
  rgpulse(pwHd,one,0.0,0.0);
  txphase(zero);
  delay(2.0e-6);
  obsprgon("waltz16", pwHd, 90.0);                /* PRG_START_DELAY */
  xmtron();
}
else delay(pwHd+2.0e-6+PRG_START_DELAY);

if(dm3[B] == 'y'){                        /*optional 2H decoupling on */
  dec3unblank();
  dec3rgpulse(1/dmf3, one, 0.0, 0.0);
  dec3unblank();
  setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
}
else delay(1/dmf3+WFG_START_DELAY);

delay(tauCC -gt5 -202.0e-6 -POWER_DELAY -1/dmf3 -WFG_START_DELAY
		-POWER_DELAY -pwHd -2.0e-6 -PRG_START_DELAY
		-pwHd-2.0e-6-PRG_STOP_DELAY);

if((h1dec[A]=='y') && (h1dec[B]=='n')) {
  xmtroff();
  obsprgoff();                                    /* PRG_STOP_DELAY */
  rgpulse(pwHd,one,2.0e-6,0.0);
  decrgpulse(pwC1,t2,0.0,0.0);
}
else {
  delay(pwHd+2.0e-6+PRG_STOP_DELAY-POWER_DELAY);
  if ((h1dec[A]=='y')&&(h1dec[B]=='y')) {
    delay(POWER_DELAY);
    decrgpulse(pwC1,t2,0.0,0.0);
  }
  if ((h1dec[A]=='n')&&(h1dec[B]=='n')) {
    obspower(tpwr);
    simpulse(2.0*pw,pwC1,two,t2,0.0,0.0);  /* Assuming 2.0*pw < pwC1 */
  }
}
/* It could be h1dec='ny' ??? */	

/*   xxxxxxxxxxxxxxxxxxxxxx       13Cb EVOLUTION       xxxxxxxxxxxxxxxxxx    */

if (CT_c[0]=='n') {
  if ((nli>1.0) && (tau1>0.0)) {     /* total 13C evolution equals d2 exactly */
            /* 2.0*pwC1/PI compensates for evolution at 64% rate during pwC1 */
    decpwrf(rf7);
    if(tau1 - 2.0*pwC1/PI - WFG3_START_DELAY - 0.5*pwZ > 0.0) {
      delay(tau1 - 2.0*pwC1/PI - WFG3_START_DELAY - 0.5*pwZ);
							  /* WFG3_START_DELAY */
      sim3shaped_pulse("", "offC7", "", 0.0, pwC7a, 2.0*pwN, zero, zero, zero,
								      0.0, 0.0);
      initval(phshift7, v7);
      decstepsize(1.0);
      dcplrphase(v7);  				        /* SAPS_DELAY */
      delay(tau1 - 2.0*pwC1/PI  - SAPS_DELAY - 0.5*pwZ - 2.0e-6);
    }
    else {
      initval(180.0, v7);
      decstepsize(1.0);
      dcplrphase(v7);  				        /* SAPS_DELAY */
      delay(2.0*tau1 - 4.0*pwC1/PI - SAPS_DELAY - 2.0e-6);
    }
  }

  else if (nli==1.0) {    /* special 1D check of pwC7 phase enabled when nli=1 */
 	 decpwrf(rf7);
	 delay(10.0e-6 + SAPS_DELAY + 0.5*pwZ1 + WFG_START_DELAY);
							  /* WFG3_START_DELAY */
	 sim3shaped_pulse("", "offC7", "", 0.0, pwC7, 2.0*pwN, zero, zero, zero,
							          2.0e-6, 0.0);
	 initval(phshift7, v7);
	 decstepsize(1.0);
	 dcplrphase(v7);  					/* SAPS_DELAY */
	 delay(10.0e-6 + WFG3_START_DELAY + 0.5*pwZ1);
      }

      else{		       /* 13Ca evolution refocused for 1st increment  */
	decpwrf(rf2);
	decrgpulse(pwC2, zero, 2.0e-6, 0.0);
      }
}  /* H1 dec. and H2 dec. status are not changed through nonCT evolution*/

else {		/* 13C CONSTANT TIME EVOLUTION */
  decpwrf(rf0);
  decpower(pwCgCO_lvl);
  if(h1dec[B]=='y') {
    if(tau1 - 2.0*pwC1/PI -WFG_START_DELAY -2*POWER_DELAY> 0.0) 
      delay(tau1 - 2.0*pwC1/PI -WFG_START_DELAY - 2*POWER_DELAY);
    decshaped_pulse("CgCO1",pwCgCO,zero,0.0,0.0);
    delay(tauC -gt8 -202.0e-6 -pwHd -2.0e-6 -PRG_STOP_DELAY
			-pwCgCO -pwC2 -WFG_STOP_DELAY-1/dmf3);

    if(dm3[B] == 'y') {                     /*optional 2H decoupling off */
      dec3rgpulse(1/dmf3, three, 0.0, 0.0);
      dec3blank();
      setstatus(DEC3ch, FALSE, 'w', FALSE, dmf3);
      dec3blank();
    }
    else delay(1/dmf3+WFG_STOP_DELAY); 
    xmtroff();
    obsprgoff();                                        /* PRG_STOP_DELAY */
    rgpulse(pwHd,three,2.0e-6,0.0);
  }
  if ((h1dec[B]=='n')&&(dm3[B]=='n')) {
    obspower(tpwr);
    if(tau1 - 2.0*pwC1/PI -WFG_START_DELAY -3*POWER_DELAY> 0.0) {
      delay(tau1 - 2.0*pwC1/PI -WFG3_START_DELAY - 3*POWER_DELAY);
      simshaped_pulse("","CgCO1",2.0*pw,pwCgCO,two,zero,0.0,0.0);
    }
    else simshaped_pulse("","CgCO1",2.0*pw,pwCgCO,two,zero,0.0,0.0);
    obspower(tpwrd);
    delay(tauC -gt8 -202.0e-6 -pwCgCO -pwC2 -POWER_DELAY);
  }
  if ((h1dec[B]=='n')&&(dm3[B]=='y')) {
    obspower(tpwr);
    if(tau1 - 2.0*pwC1/PI - WFG_START_DELAY -3*POWER_DELAY> 0.0) {
      delay(tau1 - 2.0*pwC1/PI - WFG3_START_DELAY - 3*POWER_DELAY);
      decshaped_pulse("CgCO1",pwCgCO,zero,0.0,0.0);
    }
    else decshaped_pulse("CgCO1",pwCgCO,zero,0.0,0.0);
    delay(taud-0.5*pwC2-WFG_START_DELAY-WFG_STOP_DELAY-pwCgCO);
    rgpulse(2.0*pw,two,0.0,0.0);
    obspower(tpwrd);
    delay(tauC -taud -gt8 -202e-6 -2.0*pw -POWER_DELAY -1/dmf3
	-pwCgCO -pwC2 -WFG_STOP_DELAY);
    dec3rgpulse(1/dmf3, three, 0.0, 0.0);
    dec3blank();
    setstatus(DEC3ch, FALSE, 'w', FALSE, dmf3);
    dec3blank();
  }

  delay(2.0e-6);
  zgradpulse(gzlvl8,gt8);
  delay(200.0e-6-2*POWER_DELAY);
  decpower(pwClvl);decpwrf(rf2);

  decrgpulse(pwC2,zero,0.0,0.0);

  delay(2.0e-6);
  zgradpulse(gzlvl8,gt8);        
  delay(200.0e-6-2*POWER_DELAY);

  decpower(pwCgCO_lvl);decpwrf(rf0);

  if(h1dec[A]=='y'){
    rgpulse(pwHd,one,0.0,0.0);
    txphase(zero);
    delay(2.0e-6);
    obsprgon("waltz16", pwHd, 90.0);                /* PRG_START_DELAY */
    xmtron();
  }
  else delay(pwHd+ 2.0e-6 +PRG_START_DELAY);

  if(dm3[B] == 'y'){                        /*optional 2H decoupling on */
    dec3unblank();
    dec3rgpulse(1/dmf3, one, 0.0, 0.0);
    dec3unblank();
    setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
  }
  else delay(1/dmf3+WFG_START_DELAY);

  delay(tauC -tau1 -202.0e-6 -gt8 -pwCgCO -WFG_START_DELAY
	-WFG_STOP_DELAY -POWER_DELAY -1/dmf3 -WFG_START_DELAY
	-pwHd -2.0e-6 -PRG_START_DELAY);
  decshaped_pulse("CgCO2",pwCgCO,zero,0.0,0.0);
}		/* END of C13 CONSTANT TIME EVOLUTION */

decphase(one);
decpower(pwClvl); 
decpwrf(rf1);

decrgpulse(pwC1, one, 2.0e-6, 0.0);
delay(tauCC - gt5 -202.0e-6 -2.0e-6 -pwHd -PRG_STOP_DELAY
				-1/dmf3 -WFG_STOP_DELAY);

if(dm3[B] == 'y') {                     /*optional 2H decoupling off */
  dec3rgpulse(1/dmf3, three, 0.0, 0.0);
  dec3blank();
  setstatus(DEC3ch, FALSE, 'w', FALSE, dmf3);
  dec3blank();
}
else delay(1/dmf3+WFG_STOP_DELAY);

if(h1dec[B]=='y') {
  xmtroff();
  obsprgoff();                                      /* PRG_STOP_DELAY */
  rgpulse(pwHd,three,2.0e-6,0.0);
}
else delay(2.0e-6+pwHd+PRG_STOP_DELAY);

delay(2.0e-6);
zgradpulse(gzlvl5*1.33, gt5);
delay(200.0e-6-2.0*POWER_DELAY);
decpwrf(rf2);
decphase(zero);

decrgpulse(pwC2, zero, 0.0, 0.0);

delay(2.0e-6);
zgradpulse(gzlvl5*1.33,gt5);
delay(200.0e-6-2.0*POWER_DELAY);
decpwrf(rf1);
decphase(t5);

if(h1dec[A]=='y'){
  rgpulse(pwHd,one,0.0,0.0);
  txphase(zero);
  delay(2.0e-6);
  obsprgon("waltz16", pwHd, 90.0);                /* PRG_START_DELAY */
  xmtron();
}
else delay(pwHd+ 2.0e-6 +PRG_START_DELAY);

if(dm3[B] == 'y'){                        /*optional 2H decoupling on */
  dec3unblank();
  dec3rgpulse(1/dmf3, one, 0.0, 0.0);
  dec3unblank();
  setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
}
else delay(1/dmf3+WFG_START_DELAY);


delay(tauCC - gt5 -202.0e-6 -1/dmf3 -WFG_START_DELAY -2.0e-6 -pwHd 
						-PRG_START_DELAY);

/*decrgpulse(pwC1, t5, 0.0, 0.0); */
decrgpulse(pwC1, zero, 0.0, 0.0); 

decpwrf(rf5);
decshaped_pulse("offC5", pwC5, one, 0.0, 0.0);

delay(zeta - gt7 -202.0e-6 - pwHd -2.0e-6 -PRG_STOP_DELAY
      -1/dmf3 -WFG_STOP_DELAY -0.5*10.933*pwC-2.0e-6);

if(dm3[B] == 'y') {                     /*optional 2H decoupling off */
  dec3rgpulse(1/dmf3, three, 0.0, 0.0);
  dec3blank();
  setstatus(DEC3ch, FALSE, 'w', FALSE, dmf3);
  dec3blank();
}
else delay(1/dmf3+WFG_STOP_DELAY);

if(h1dec[A]=='y') {
  xmtroff();
  obsprgoff();                                      /* PRG_STOP_DELAY */
  rgpulse(pwHd,three,2.0e-6,0.0);
}
else delay(2.0e-6+pwHd+PRG_STOP_DELAY);

delay(2.0e-6);
zgradpulse(-gzlvl7, gt7);
decpwrf(rf0);
decphase(zero);
delay(200.0e-6-2.0*POWER_DELAY);

  decrgpulse(pwC*158.0/90.0, zero, 0.0, 0.0);
  decrgpulse(pwC*171.2/90.0, two, 0.0, 0.0);
  decrgpulse(pwC*342.8/90.0, zero, 0.0, 0.0);      /* Shaka 6 composite */
  decrgpulse(pwC*145.5/90.0, two, 0.0, 0.0);
  decrgpulse(pwC*81.2/90.0, zero, 0.0, 0.0);
  decrgpulse(pwC*85.3/90.0, two, 0.0, 0.0);

delay(2.0e-6);
zgradpulse(-gzlvl7, gt7);
delay(200.0e-6);
decpwrf(rf5);
decphase(one);
txphase(one);

if(h1dec[A]=='y'){
  rgpulse(pwHd,one,0.0,0.0);
  txphase(zero);
  delay(2.0e-6);
  obsprgon("waltz16", pwHd, 90.0);                /* PRG_START_DELAY */
  xmtron();
}
else delay(pwHd+ 2.0e-6 +PRG_START_DELAY);

if(dm3[B] == 'y'){                        /*optional 2H decoupling on */
  dec3unblank();
  dec3rgpulse(1/dmf3, one, 0.0, 0.0);
  dec3unblank();
  setstatus(DEC3ch, TRUE, 'w', FALSE, dmf3);
}
else delay(1/dmf3+WFG_START_DELAY);

delay(zeta - gt7 - 0.5*10.933*pwC - WFG_START_DELAY-2.0e-6
	-1/dmf3 -WFG_START_DELAY -pwHd -2.0e-6 -PRG_START_DELAY);
                                                           /* WFG_START_DELAY */
decshaped_pulse("offC5", pwC5, t5, 0.0, 0.0);


/*  xxxxxxxxxxxxxxxxxx    OPTIONS FOR N15 EVOLUTION    xxxxxxxxxxxxxxxxxxxxx  */

dec2phase(t8);
txphase(one);
dcplrphase(zero);
obspower(tpwrd);

if(dm3[B] == 'y')  {                     /*optional 2H decoupling off */
  dec3rgpulse(1/dmf3, three, 0.0, 0.0);
  dec3blank();
  setstatus(DEC3ch, FALSE, 'w', FALSE, dmf3);
  dec3blank();
}

if(h1dec[A]=='y') { 
  xmtroff();
  obsprgoff();                                      /* PRG_STOP_DELAY */
  rgpulse(pwHd,three,2.0e-6,0.0);
}

zgradpulse(gzlvl4, gt4);
delay(2.0e-4);

if (TROSY[A]=='n') {
  rgpulse(pwHd,one,0.0,0.0);
  txphase(zero);
  delay(2.0e-6);
  obsprgon("waltz16", pwHd, 90.0);
  xmtron();
}

dec2rgpulse(pwN, t8, 0.0, 0.0);

decphase(zero);
dec2phase(t9);
decpwrf(rf7);
delay(timeTN - tau2);

sim3shaped_pulse("","offC7","",0.0, pwC7, 2.0*pwN, zero, zero, t9, 0.0, 0.0);

dec2phase(t10);
decpwrf(rf5);

if (TROSY[A]=='y')
{    if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.5e-4 + pwHs)
	{
	  txphase(three);
          delay(timeTN - pwC2) ;         /* WFG_START_DELAY */
          decrgpulse(pwC2, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.5e-4 - pwHs);
          if (mag_flg[A]=='y')  magradpulse(icosel*gzcal*gzlvl1, gt1);
          else  zgradpulse(icosel*gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwrs);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
	  txphase(t4);
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(0.5e-4 - POWER_DELAY);
	}

    else if (tau2 > pwHs + 0.5e-4)
	{
	  txphase(three);
          delay(timeTN-pwC2-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else  zgradpulse(icosel*gzlvl1, gt1);	   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwrs);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                     /* WFG_START_DELAY */
          decrgpulse(pwC2, zero, 0.0, 0.0);
          delay(tau2 - pwHs - 0.5e-4);
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
	  txphase(t4);
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(0.5e-4 - POWER_DELAY);
	}
    else
	{
	  txphase(three);
          delay(timeTN - pwC2 - gt1 - 2.0*GRADIENT_DELAY
							    - 1.5e-4 - pwHs);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else  zgradpulse(icosel*gzlvl1, gt1);	   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwrs);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                     /* WFG_START_DELAY */
   	  shaped_pulse("H2Osinc", pwHs, three, 0.0, 0.0);
	  txphase(t4);
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(0.5e-4 - POWER_DELAY);
          decrgpulse(pwC2, zero, 0.0, 0.0);
          delay(tau2);
	}
}
else
{
    if (tau2 > kappa)
	{
          delay(timeTN - pwC2);     	   /* WFG_START_DELAY */
          decrgpulse(pwC2, zero, 0.0, 0.0);
          delay(tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
          delay(kappa - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else    zgradpulse(icosel*gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else if (tau2 > (kappa - pwC2))
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);                                     /* WFG_START_DELAY */
          decrgpulse(pwC2, zero, 0.0, 0.0);
          delay(kappa -pwC2 -gt1 -2.0*GRADIENT_DELAY -1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else    zgradpulse(icosel*gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else if (tau2 > gt1 + 2.0*GRADIENT_DELAY + 1.0e-4)
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
          obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
          delay(kappa - tau2 - pwC2 );   /* WFG_START_DELAY */
          decrgpulse(pwC2, zero, 0.0, 0.0);
          delay(tau2 - gt1 - 2.0*GRADIENT_DELAY - 1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else    zgradpulse(icosel*gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);
	}
    else
	{
          delay(timeTN + tau2 - kappa - PRG_STOP_DELAY - pwHd - 2.0e-6);
          xmtroff();
	  obsprgoff();					    /* PRG_STOP_DELAY */
	  rgpulse(pwHd,three,2.0e-6,0.0);
	  txphase(t4);
    	  delay(kappa-tau2-pwC2-gt1-2.0*GRADIENT_DELAY-1.0e-4);
          if (mag_flg[A]=='y')    magradpulse(icosel*gzcal*gzlvl1, gt1);
          else    zgradpulse(icosel*gzlvl1, gt1);   	/* 2.0*GRADIENT_DELAY */
	  obspower(tpwr);				       /* POWER_DELAY */
	  delay(1.0e-4 - POWER_DELAY);                    /* WFG_START_DELAY */
          decrgpulse(pwC2, zero, 0.0, 0.0);
          delay(tau2);
	}
}
/*  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  */
	if (TROSY[A]=='y')  rgpulse(pw, t4, 0.0, 0.0);
	else                sim3pulse(pw, 0.0, pwN, t4, zero, t10, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl5, gt5);
	if (TROSY[A]=='y')   delay(lambda - 0.65*(pw + pwN) - gt5);
	else   delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	zgradpulse(gzlvl5, gt5);
	txphase(one);
	dec2phase(t11);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(pw, 0.0, pwN, one, zero, t11, 0.0, 0.0);

	txphase(zero);
	dec2phase(zero);
	zgradpulse(gzlvl6, gt5);
	delay(lambda - 1.3*pwN - gt5);

	sim3pulse(2.0*pw, 0.0, 2.0*pwN, zero, zero, zero, 0.0, 0.0);

	dec2phase(t10);
	zgradpulse(gzlvl6, gt5);
	if (TROSY[A]=='y')   delay(lambda - 1.6*pwN - gt5);
	else   delay(lambda - 0.65*pwN - gt5);

	if (TROSY[A]=='y')   dec2rgpulse(pwN, t10, 0.0, 0.0); 
	else    	     rgpulse(pw, zero, 0.0, 0.0); 

	delay((gt1/10.0) + gstab - 0.5*pw + 2.0*GRADIENT_DELAY + POWER_DELAY);

	rgpulse(2.0*pw, zero, 0.0, rof1);
	dec2power(dpwr2);				       /* POWER_DELAY */
        if (mag_flg[A] == 'y')    magradpulse(gzcal*gzlvl2, gt1/10.0);
        else   zgradpulse(gzlvl2, gt1/10.0);            /* 2.0*GRADIENT_DELAY */

statusdelay(C,gstab- rof1);
   if (dm3[B]=='y') lk_sample();

	setreceiver(t12);
}