C++ (Cpp) zg_chip_reset Exemples

Exemple #1

Fichier : g2100.c Projet : bruce33/avrfreertos

void zg_init()
{
	uint8_t clr;

	spiBegin(SS_PB2);
	spiSetClockDivider(SPI_CLOCK_DIV2);
	clr = SPSR;
	clr = SPDR;

	intr_occured = 0;
	intr_valid = 0;
	lastRssi = 0;
	zg_drv_state = DRV_STATE_INIT;
	zg_conn_status = 0;
	tx_ready = 0;
	rx_ready = 0;
	cnf_pending = 0;
	zg_buf = uip_buf;
	zg_buf_len = UIP_BUFSIZE;

	zg_chip_reset();
	zg_interrupt2_reg();
	zg_interrupt_reg(0xff, 0);
	zg_interrupt_reg(0x80|0x40, 1);

	ssid_len = (uint8_t)strlen((char *)ssid);
	security_passphrase_len = (uint8_t)strlen_P((PGM_P)security_passphrase);

	/* Create the semaphore used by the ISR to indicate that a Rx frame is ready
	for processing. */
    vSemaphoreCreateBinary( xZGIntrSemaphore );

}

Exemple #2

Fichier : g2100.c Projet : ADDTech/techrm

void zg_init()
{
	U8 clr;

	ZG2100_SpiInit();
	clr = SPSR;
	clr = SPDR;

	intr_occured = 0;
	intr_valid = 0;
	zg_drv_state = DRV_STATE_INIT;
	zg_conn_status = 0;
	tx_ready = 0;
	rx_ready = 0;
	cnf_pending = 0;
	zg_buf = uip_buf;
	zg_buf_len = UIP_BUFSIZE;

	zg_chip_reset();
	zg_interrupt2_reg();
	zg_interrupt_reg(0xff, 0);
	zg_interrupt_reg(0x80|0x40, 1);

	ssid_len = (U8)strlen_P(ssid);
	security_passphrase_len = (U8)strlen_P(security_passphrase);
}

Exemple #3

Fichier : g2100.c Projet : githubhjz/avrNetStack

void zg_init()
{
    unsigned char clr;

    spiInit();
    clr = SPSR;
    clr = SPDR;

    intr_occured = 0;
    intr_valid = 0;
    zg_drv_state = DRV_STATE_INIT;
    zg_conn_status = 0;
    tx_ready = 0;
    rx_ready = 0;
    cnf_pending = 0;
    // zg_buf = MyNetworkBuffer;
    // zg_buf_len = NETWORK_BUFSIZE;

    zg_buf = mmalloc(150);
    zg_buf_len = 150;

    zg_chip_reset();
    zg_interrupt2_reg();
    zg_interrupt_reg(0xff, 0);
    zg_interrupt_reg(0x80|0x40, 1);

    ssid_len = (unsigned char)strlen(ssid);
    security_passphrase_len = (unsigned char)strlen(security_passphrase);
}

Exemple #4

Fichier : g2100.c Projet : ggaavv/Equinox-Clock

void zg_init()
{
	intr_occured = 0;
	intr_valid = 0;
	lastRssi = 0;
	zg_drv_state = DRV_STATE_INIT;
	zg_conn_status = 0;
	tx_ready = 0;
	rx_ready = 0;
	cnf_pending = 0;
	zg_buf = uip_buf;
	zg_buf_len = UIP_BUFSIZE;

	zg_chip_reset();
	zg_interrupt2_reg();
	zg_interrupt_reg(0xff, 0);
	zg_interrupt_reg(0x80|0x40, 1);

	ssid_len = (U8)strlen(ssid);
}

Exemple #5

Fichier : mrf24wb0ma.c Projet : githubhjz/avrNetStack

void macReset(void) {
    zg_chip_reset();
}