bool MeshRefinement::limit_overrefined_boundary(const unsigned int max_mismatch)
{
// This function must be run on all processors at once
parallel_object_only();
bool flags_changed = false;
// Loop over all the active elements & look for mismatches to fix.
{
MeshBase::element_iterator elem_it = _mesh.active_elements_begin();
const MeshBase::element_iterator elem_end = _mesh.active_elements_end();
for (; elem_it != elem_end; ++elem_it)
{
Elem* elem = *elem_it;
// If we don't have an interior_parent then there's nothing to
// be mismatched with.
if ((elem->dim() >= LIBMESH_DIM) ||
!elem->interior_parent())
continue;
const unsigned char elem_level =
cast_int<unsigned char>(elem->level() +
((elem->refinement_flag() == Elem::REFINE) ? 1 : 0));
const unsigned char elem_p_level =
cast_int<unsigned char>(elem->p_level() +
((elem->p_refinement_flag() == Elem::REFINE) ? 1 : 0));
// get all relevant interior elements
std::set<const Elem*> neighbor_set;
elem->find_interior_neighbors(neighbor_set);
std::set<const Elem*>::iterator n_it = neighbor_set.begin();
for (; n_it != neighbor_set.end(); ++n_it)
{
// FIXME - non-const versions of the Elem set methods
// would be nice
Elem* neighbor = const_cast<Elem*>(*n_it);
if (((elem_level - max_mismatch) >
neighbor->level()) &&
(neighbor->refinement_flag() != Elem::REFINE))
{
neighbor->set_refinement_flag(Elem::REFINE);
flags_changed = true;
}
if (((elem_p_level + 1 - max_mismatch) >
neighbor->p_level()) &&
(neighbor->p_refinement_flag() != Elem::REFINE))
{
neighbor->set_p_refinement_flag(Elem::REFINE);
flags_changed = true;
}
} // loop over interior neighbors
}
}
return flags_changed;
}
void UnstructuredMesh::find_neighbors (const bool reset_remote_elements,
const bool reset_current_list)
{
// We might actually want to run this on an empty mesh
// (e.g. the boundary mesh for a nonexistant bcid!)
// libmesh_assert_not_equal_to (this->n_nodes(), 0);
// libmesh_assert_not_equal_to (this->n_elem(), 0);
// This function must be run on all processors at once
parallel_object_only();
LOG_SCOPE("find_neighbors()", "Mesh");
const element_iterator el_end = this->elements_end();
//TODO:[BSK] This should be removed later?!
if (reset_current_list)
for (element_iterator el = this->elements_begin(); el != el_end; ++el)
{
Elem * e = *el;
for (unsigned int s=0; s<e->n_neighbors(); s++)
if (e->neighbor_ptr(s) != remote_elem ||
reset_remote_elements)
e->set_neighbor(s, libmesh_nullptr);
}
// Find neighboring elements by first finding elements
// with identical side keys and then check to see if they
// are neighbors
{
// data structures -- Use the hash_multimap if available
typedef unsigned int key_type;
typedef std::pair<Elem *, unsigned char> val_type;
typedef std::pair<key_type, val_type> key_val_pair;
typedef LIBMESH_BEST_UNORDERED_MULTIMAP<key_type, val_type> map_type;
// A map from side keys to corresponding elements & side numbers
map_type side_to_elem_map;
for (element_iterator el = this->elements_begin(); el != el_end; ++el)
{
Elem * element = *el;
for (unsigned char ms=0; ms<element->n_neighbors(); ms++)
{
next_side:
// If we haven't yet found a neighbor on this side, try.
// Even if we think our neighbor is remote, that
// information may be out of date.
if (element->neighbor_ptr(ms) == libmesh_nullptr ||
element->neighbor_ptr(ms) == remote_elem)
{
// Get the key for the side of this element
const unsigned int key = element->key(ms);
// Look for elements that have an identical side key
std::pair <map_type::iterator, map_type::iterator>
bounds = side_to_elem_map.equal_range(key);
// May be multiple keys, check all the possible
// elements which _might_ be neighbors.
if (bounds.first != bounds.second)
{
// Get the side for this element
const UniquePtr<Elem> my_side(element->side_ptr(ms));
// Look at all the entries with an equivalent key
while (bounds.first != bounds.second)
{
// Get the potential element
Elem * neighbor = bounds.first->second.first;
// Get the side for the neighboring element
const unsigned int ns = bounds.first->second.second;
const UniquePtr<Elem> their_side(neighbor->side_ptr(ns));
//libmesh_assert(my_side.get());
//libmesh_assert(their_side.get());
// If found a match with my side
//
// We need special tests here for 1D:
// since parents and children have an equal
// side (i.e. a node), we need to check
// ns != ms, and we also check level() to
// avoid setting our neighbor pointer to
// any of our neighbor's descendants
if( (*my_side == *their_side) &&
(element->level() == neighbor->level()) &&
((element->dim() != 1) || (ns != ms)) )
{
// So share a side. Is this a mixed pair
// of subactive and active/ancestor
// elements?
// If not, then we're neighbors.
// If so, then the subactive's neighbor is
if (element->subactive() ==
neighbor->subactive())
{
// an element is only subactive if it has
// been coarsened but not deleted
element->set_neighbor (ms,neighbor);
neighbor->set_neighbor(ns,element);
}
else if (element->subactive())
{
element->set_neighbor(ms,neighbor);
}
else if (neighbor->subactive())
{
neighbor->set_neighbor(ns,element);
}
side_to_elem_map.erase (bounds.first);
// get out of this nested crap
goto next_side;
}
++bounds.first;
}
}
// didn't find a match...
// Build the map entry for this element
key_val_pair kvp;
kvp.first = key;
kvp.second.first = element;
kvp.second.second = ms;
// use the lower bound as a hint for
// where to put it.
#if defined(LIBMESH_HAVE_UNORDERED_MAP) || defined(LIBMESH_HAVE_TR1_UNORDERED_MAP) || defined(LIBMESH_HAVE_HASH_MAP) || defined(LIBMESH_HAVE_EXT_HASH_MAP)
side_to_elem_map.insert (kvp);
#else
side_to_elem_map.insert (bounds.first,kvp);
#endif
}
}
}
}
#ifdef LIBMESH_ENABLE_AMR
/**
* Here we look at all of the child elements which
* don't already have valid neighbors.
*
* If a child element has a NULL neighbor it is
* either because it is on the boundary or because
* its neighbor is at a different level. In the
* latter case we must get the neighbor from the
* parent.
*
* If a child element has a remote_elem neighbor
* on a boundary it shares with its parent, that
* info may have become out-dated through coarsening
* of the neighbor's parent. In this case, if the
* parent's neighbor is active then the child should
* share it.
*
* Furthermore, that neighbor better be active,
* otherwise we missed a child somewhere.
*
*
* We also need to look through children ordered by increasing
* refinement level in order to add new interior_parent() links in
* boundary elements which have just been generated by refinement,
* and fix links in boundary elements whose previous
* interior_parent() has just been coarsened away.
*/
const unsigned int n_levels = MeshTools::n_levels(*this);
for (unsigned int level = 1; level < n_levels; ++level)
{
element_iterator end = this->level_elements_end(level);
for (element_iterator el = this->level_elements_begin(level);
el != end; ++el)
{
Elem * current_elem = *el;
libmesh_assert(current_elem);
Elem * parent = current_elem->parent();
libmesh_assert(parent);
const unsigned int my_child_num = parent->which_child_am_i(current_elem);
for (unsigned int s=0; s < current_elem->n_neighbors(); s++)
{
if (current_elem->neighbor_ptr(s) == libmesh_nullptr ||
(current_elem->neighbor_ptr(s) == remote_elem &&
parent->is_child_on_side(my_child_num, s)))
{
Elem * neigh = parent->neighbor_ptr(s);
// If neigh was refined and had non-subactive children
// made remote earlier, then a non-subactive elem should
// actually have one of those remote children as a
// neighbor
if (neigh && (neigh->ancestor()) && (!current_elem->subactive()))
{
#ifdef DEBUG
// Let's make sure that "had children made remote"
// situation is actually the case
libmesh_assert(neigh->has_children());
bool neigh_has_remote_children = false;
for (unsigned int c = 0; c != neigh->n_children(); ++c)
{
if (neigh->child_ptr(c) == remote_elem)
neigh_has_remote_children = true;
}
libmesh_assert(neigh_has_remote_children);
// And let's double-check that we don't have
// a remote_elem neighboring a local element
libmesh_assert_not_equal_to (current_elem->processor_id(),
this->processor_id());
#endif // DEBUG
neigh = const_cast<RemoteElem *>(remote_elem);
}
if (!current_elem->subactive())
current_elem->set_neighbor(s, neigh);
#ifdef DEBUG
if (neigh != libmesh_nullptr && neigh != remote_elem)
// We ignore subactive elements here because
// we don't care about neighbors of subactive element.
if ((!neigh->active()) && (!current_elem->subactive()))
{
libMesh::err << "On processor " << this->processor_id()
<< std::endl;
libMesh::err << "Bad element ID = " << current_elem->id()
<< ", Side " << s << ", Bad neighbor ID = " << neigh->id() << std::endl;
libMesh::err << "Bad element proc_ID = " << current_elem->processor_id()
<< ", Bad neighbor proc_ID = " << neigh->processor_id() << std::endl;
libMesh::err << "Bad element size = " << current_elem->hmin()
<< ", Bad neighbor size = " << neigh->hmin() << std::endl;
libMesh::err << "Bad element center = " << current_elem->centroid()
<< ", Bad neighbor center = " << neigh->centroid() << std::endl;
libMesh::err << "ERROR: "
<< (current_elem->active()?"Active":"Ancestor")
<< " Element at level "
<< current_elem->level() << std::endl;
libMesh::err << "with "
<< (parent->active()?"active":
(parent->subactive()?"subactive":"ancestor"))
<< " parent share "
<< (neigh->subactive()?"subactive":"ancestor")
<< " neighbor at level " << neigh->level()
<< std::endl;
NameBasedIO(*this).write ("bad_mesh.gmv");
libmesh_error_msg("Problematic mesh written to bad_mesh.gmv.");
}
#endif // DEBUG
}
}
// We can skip to the next element if we're full-dimension
// and therefore don't have any interior parents
if (current_elem->dim() >= LIBMESH_DIM)
continue;
// We have no interior parents unless we can find one later
current_elem->set_interior_parent(libmesh_nullptr);
Elem * pip = parent->interior_parent();
if (!pip)
continue;
// If there's no interior_parent children, whether due to a
// remote element or a non-conformity, then there's no
// children to search.
if (pip == remote_elem || pip->active())
{
current_elem->set_interior_parent(pip);
continue;
}
// For node comparisons we'll need a sensible tolerance
Real node_tolerance = current_elem->hmin() * TOLERANCE;
// Otherwise our interior_parent should be a child of our
// parent's interior_parent.
for (unsigned int c=0; c != pip->n_children(); ++c)
{
Elem * child = pip->child_ptr(c);
// If we have a remote_elem, that might be our
// interior_parent. We'll set it provisionally now and
// keep trying to find something better.
if (child == remote_elem)
{
current_elem->set_interior_parent
(const_cast<RemoteElem *>(remote_elem));
continue;
}
bool child_contains_our_nodes = true;
for (unsigned int n=0; n != current_elem->n_nodes();
++n)
{
bool child_contains_this_node = false;
for (unsigned int cn=0; cn != child->n_nodes();
++cn)
if (child->point(cn).absolute_fuzzy_equals
(current_elem->point(n), node_tolerance))
{
child_contains_this_node = true;
break;
}
if (!child_contains_this_node)
{
child_contains_our_nodes = false;
break;
}
}
if (child_contains_our_nodes)
{
current_elem->set_interior_parent(child);
break;
}
}
// We should have found *some* interior_parent at this
// point, whether semilocal or remote.
libmesh_assert(current_elem->interior_parent());
}
}
#endif // AMR
#ifdef DEBUG
MeshTools::libmesh_assert_valid_neighbors(*this,
!reset_remote_elements);
MeshTools::libmesh_assert_valid_amr_interior_parents(*this);
#endif
}
void MeshBase::detect_interior_parents()
{
// This requires an inspection on every processor
parallel_object_only();
// Check if the mesh contains mixed dimensions. If so, then set interior parents, otherwise return.
if (this->elem_dimensions().size() == 1)
return;
//This map will be used to set interior parents
LIBMESH_BEST_UNORDERED_MAP<dof_id_type, std::vector<dof_id_type> > node_to_elem;
const_element_iterator el = this->active_elements_begin();
const_element_iterator end = this->active_elements_end();
for (; el!=end; ++el)
{
const Elem * elem = *el;
// Populating the node_to_elem map, same as MeshTools::build_nodes_to_elem_map
for (unsigned int n=0; n<elem->n_vertices(); n++)
{
libmesh_assert_less (elem->id(), this->max_elem_id());
node_to_elem[elem->node(n)].push_back(elem->id());
}
}
// Automatically set interior parents
el = this->elements_begin();
for (; el!=end; ++el)
{
Elem * element = *el;
// Ignore an 3D element or an element that already has an interior parent
if (element->dim()>=LIBMESH_DIM || element->interior_parent())
continue;
// Start by generating a SET of elements that are dim+1 to the current
// element at each vertex of the current element, thus ignoring interior nodes.
// If one of the SET of elements is empty, then we will not have an interior parent
// since an interior parent must be connected to all vertices of the current element
std::vector< std::set<dof_id_type> > neighbors( element->n_vertices() );
bool found_interior_parents = false;
for (dof_id_type n=0; n < element->n_vertices(); n++)
{
std::vector<dof_id_type> & element_ids = node_to_elem[element->node(n)];
for (std::vector<dof_id_type>::iterator e_it = element_ids.begin();
e_it != element_ids.end(); e_it++)
{
dof_id_type eid = *e_it;
if (this->elem(eid)->dim() == element->dim()+1)
neighbors[n].insert(eid);
}
if (neighbors[n].size()>0)
{
found_interior_parents = true;
}
else
{
// We have found an empty set, no reason to continue
// Ensure we set this flag to false before the break since it could have
// been set to true for previous vertex
found_interior_parents = false;
break;
}
}
// If we have successfully generated a set of elements for each vertex, we will compare
// the set for vertex 0 will the sets for the vertices until we find a id that exists in
// all sets. If found, this is our an interior parent id. The interior parent id found
// will be the lowest element id if there is potential for multiple interior parents.
if (found_interior_parents)
{
std::set<dof_id_type> & neighbors_0 = neighbors[0];
for (std::set<dof_id_type>::iterator e_it = neighbors_0.begin();
e_it != neighbors_0.end(); e_it++)
{
found_interior_parents=false;
dof_id_type interior_parent_id = *e_it;
for (dof_id_type n=1; n < element->n_vertices(); n++)
{
if (neighbors[n].find(interior_parent_id)!=neighbors[n].end())
{
found_interior_parents=true;
}
else
{
found_interior_parents=false;
break;
}
}
if (found_interior_parents)
{
element->set_interior_parent(this->elem(interior_parent_id));
break;
}
}
}
}
}
Elem *
Packing<Elem *>::unpack (std::vector<largest_id_type>::const_iterator in,
MeshBase * mesh)
{
#ifndef NDEBUG
const std::vector<largest_id_type>::const_iterator original_in = in;
const largest_id_type incoming_header = *in++;
libmesh_assert_equal_to (incoming_header, elem_magic_header);
#endif
// int 0: level
const unsigned int level =
cast_int<unsigned int>(*in++);
#ifdef LIBMESH_ENABLE_AMR
// int 1: p level
const unsigned int p_level =
cast_int<unsigned int>(*in++);
// int 2: refinement flag and encoded has_children
const int rflag = cast_int<int>(*in++);
const int invalid_rflag =
cast_int<int>(Elem::INVALID_REFINEMENTSTATE);
libmesh_assert_greater_equal (rflag, 0);
libmesh_assert_less (rflag, invalid_rflag*2+1);
const bool has_children = (rflag > invalid_rflag);
const Elem::RefinementState refinement_flag = has_children ?
cast_int<Elem::RefinementState>(rflag - invalid_rflag - 1) :
cast_int<Elem::RefinementState>(rflag);
// int 3: p refinement flag
const int pflag = cast_int<int>(*in++);
libmesh_assert_greater_equal (pflag, 0);
libmesh_assert_less (pflag, Elem::INVALID_REFINEMENTSTATE);
const Elem::RefinementState p_refinement_flag =
cast_int<Elem::RefinementState>(pflag);
#else
in += 3;
#endif // LIBMESH_ENABLE_AMR
// int 4: element type
const int typeint = cast_int<int>(*in++);
libmesh_assert_greater_equal (typeint, 0);
libmesh_assert_less (typeint, INVALID_ELEM);
const ElemType type =
cast_int<ElemType>(typeint);
const unsigned int n_nodes =
Elem::type_to_n_nodes_map[type];
// int 5: processor id
const processor_id_type processor_id =
cast_int<processor_id_type>(*in++);
libmesh_assert (processor_id < mesh->n_processors() ||
processor_id == DofObject::invalid_processor_id);
// int 6: subdomain id
const subdomain_id_type subdomain_id =
cast_int<subdomain_id_type>(*in++);
// int 7: dof object id
const dof_id_type id =
cast_int<dof_id_type>(*in++);
libmesh_assert_not_equal_to (id, DofObject::invalid_id);
#ifdef LIBMESH_ENABLE_UNIQUE_ID
// int 8: dof object unique id
const unique_id_type unique_id =
cast_int<unique_id_type>(*in++);
#endif
#ifdef LIBMESH_ENABLE_AMR
// int 9: parent dof object id.
// Note: If level==0, then (*in) == invalid_id. In
// this case, the equality check in cast_int<unsigned>(*in) will
// never succeed. Therefore, we should only attempt the more
// rigorous cast verification in cases where level != 0.
const dof_id_type parent_id =
(level == 0)
? static_cast<dof_id_type>(*in++)
: cast_int<dof_id_type>(*in++);
libmesh_assert (level == 0 || parent_id != DofObject::invalid_id);
libmesh_assert (level != 0 || parent_id == DofObject::invalid_id);
// int 10: local child id
// Note: If level==0, then which_child_am_i is not valid, so don't
// do the more rigorous cast verification.
const unsigned int which_child_am_i =
(level == 0)
? static_cast<unsigned int>(*in++)
: cast_int<unsigned int>(*in++);
#else
in += 2;
#endif // LIBMESH_ENABLE_AMR
const dof_id_type interior_parent_id =
static_cast<dof_id_type>(*in++);
// Make sure we don't miscount above when adding the "magic" header
// plus the real data header
libmesh_assert_equal_to (in - original_in, header_size + 1);
Elem * elem = mesh->query_elem_ptr(id);
// if we already have this element, make sure its
// properties match, and update any missing neighbor
// links, but then go on
if (elem)
{
libmesh_assert_equal_to (elem->level(), level);
libmesh_assert_equal_to (elem->id(), id);
//#ifdef LIBMESH_ENABLE_UNIQUE_ID
// No check for unique id sanity
//#endif
libmesh_assert_equal_to (elem->processor_id(), processor_id);
libmesh_assert_equal_to (elem->subdomain_id(), subdomain_id);
libmesh_assert_equal_to (elem->type(), type);
libmesh_assert_equal_to (elem->n_nodes(), n_nodes);
#ifndef NDEBUG
// All our nodes should be correct
for (unsigned int i=0; i != n_nodes; ++i)
libmesh_assert(elem->node_id(i) ==
cast_int<dof_id_type>(*in++));
#else
in += n_nodes;
#endif
#ifdef LIBMESH_ENABLE_AMR
libmesh_assert_equal_to (elem->refinement_flag(), refinement_flag);
libmesh_assert_equal_to (elem->has_children(), has_children);
#ifdef DEBUG
if (elem->active())
{
libmesh_assert_equal_to (elem->p_level(), p_level);
libmesh_assert_equal_to (elem->p_refinement_flag(), p_refinement_flag);
}
#endif
libmesh_assert (!level || elem->parent() != libmesh_nullptr);
libmesh_assert (!level || elem->parent()->id() == parent_id);
libmesh_assert (!level || elem->parent()->child_ptr(which_child_am_i) == elem);
#endif
// Our interior_parent link should be "close to" correct - we
// may have to update it, but we can check for some
// inconsistencies.
{
// If the sending processor sees no interior_parent here, we'd
// better agree.
if (interior_parent_id == DofObject::invalid_id)
{
if (elem->dim() < LIBMESH_DIM)
libmesh_assert (!(elem->interior_parent()));
}
// If the sending processor has a remote_elem interior_parent,
// then all we know is that we'd better have *some*
// interior_parent
else if (interior_parent_id == remote_elem->id())
{
libmesh_assert(elem->interior_parent());
}
else
{
Elem * ip = mesh->query_elem_ptr(interior_parent_id);
// The sending processor sees an interior parent here, so
// if we don't have that interior element, then we'd
// better have a remote_elem signifying that fact.
if (!ip)
libmesh_assert_equal_to (elem->interior_parent(), remote_elem);
else
{
// The sending processor has an interior_parent here,
// and we have that element, but that does *NOT* mean
// we're already linking to it. Perhaps we initially
// received elem from a processor on which the
// interior_parent link was remote?
libmesh_assert(elem->interior_parent() == ip ||
elem->interior_parent() == remote_elem);
// If the link was originally remote, update it
if (elem->interior_parent() == remote_elem)
{
elem->set_interior_parent(ip);
}
}
}
}
// Our neighbor links should be "close to" correct - we may have
// to update a remote_elem link, and we can check for possible
// inconsistencies along the way.
//
// For subactive elements, we don't bother keeping neighbor
// links in good shape, so there's nothing we need to set or can
// safely assert here.
if (!elem->subactive())
for (auto n : elem->side_index_range())
{
const dof_id_type neighbor_id =
cast_int<dof_id_type>(*in++);
// If the sending processor sees a domain boundary here,
// we'd better agree.
if (neighbor_id == DofObject::invalid_id)
{
libmesh_assert (!(elem->neighbor_ptr(n)));
continue;
}
// If the sending processor has a remote_elem neighbor here,
// then all we know is that we'd better *not* have a domain
// boundary.
if (neighbor_id == remote_elem->id())
{
libmesh_assert(elem->neighbor_ptr(n));
continue;
}
Elem * neigh = mesh->query_elem_ptr(neighbor_id);
// The sending processor sees a neighbor here, so if we
// don't have that neighboring element, then we'd better
// have a remote_elem signifying that fact.
if (!neigh)
{
libmesh_assert_equal_to (elem->neighbor_ptr(n), remote_elem);
continue;
}
// The sending processor has a neighbor here, and we have
// that element, but that does *NOT* mean we're already
// linking to it. Perhaps we initially received both elem
// and neigh from processors on which their mutual link was
// remote?
libmesh_assert(elem->neighbor_ptr(n) == neigh ||
elem->neighbor_ptr(n) == remote_elem);
// If the link was originally remote, we should update it,
// and make sure the appropriate parts of its family link
// back to us.
if (elem->neighbor_ptr(n) == remote_elem)
{
elem->set_neighbor(n, neigh);
elem->make_links_to_me_local(n);
}
}
// Our p level and refinement flags should be "close to" correct
// if we're not an active element - we might have a p level
// increased or decreased by changes in remote_elem children.
//
// But if we have remote_elem children, then we shouldn't be
// doing a projection on this inactive element on this
// processor, so we won't need correct p settings. Couldn't
// hurt to update, though.
#ifdef LIBMESH_ENABLE_AMR
if (elem->processor_id() != mesh->processor_id())
{
elem->hack_p_level(p_level);
elem->set_p_refinement_flag(p_refinement_flag);
}
#endif // LIBMESH_ENABLE_AMR
// FIXME: We should add some debug mode tests to ensure that the
// encoded indexing and boundary conditions are consistent.
}
else
{
// We don't already have the element, so we need to create it.
// Find the parent if necessary
Elem * parent = libmesh_nullptr;
#ifdef LIBMESH_ENABLE_AMR
// Find a child element's parent
if (level > 0)
{
// Note that we must be very careful to construct the send
// connectivity so that parents are encountered before
// children. If we get here and can't find the parent that
// is a fatal error.
parent = mesh->elem_ptr(parent_id);
}
// Or assert that the sending processor sees no parent
else
libmesh_assert_equal_to (parent_id, DofObject::invalid_id);
#else
// No non-level-0 elements without AMR
libmesh_assert_equal_to (level, 0);
#endif
elem = Elem::build(type,parent).release();
libmesh_assert (elem);
#ifdef LIBMESH_ENABLE_AMR
if (level != 0)
{
// Since this is a newly created element, the parent must
// have previously thought of this child as a remote element.
libmesh_assert_equal_to (parent->child_ptr(which_child_am_i), remote_elem);
parent->add_child(elem, which_child_am_i);
}
// Assign the refinement flags and levels
elem->set_p_level(p_level);
elem->set_refinement_flag(refinement_flag);
elem->set_p_refinement_flag(p_refinement_flag);
libmesh_assert_equal_to (elem->level(), level);
// If this element should have children, assign remote_elem to
// all of them for now, for consistency. Later unpacked
// elements may overwrite that.
if (has_children)
{
const unsigned int nc = elem->n_children();
for (unsigned int c=0; c != nc; ++c)
elem->add_child(const_cast<RemoteElem *>(remote_elem), c);
}
#endif // LIBMESH_ENABLE_AMR
// Assign the IDs
elem->subdomain_id() = subdomain_id;
elem->processor_id() = processor_id;
elem->set_id() = id;
#ifdef LIBMESH_ENABLE_UNIQUE_ID
elem->set_unique_id() = unique_id;
#endif
// Assign the connectivity
libmesh_assert_equal_to (elem->n_nodes(), n_nodes);
for (unsigned int n=0; n != n_nodes; n++)
elem->set_node(n) =
mesh->node_ptr
(cast_int<dof_id_type>(*in++));
// Set interior_parent if found
{
// We may be unpacking an element that was a ghost element on the
// sender, in which case the element's interior_parent may not be
// known by the packed element. We'll have to set such
// interior_parents to remote_elem ourselves and wait for a
// later packed element to give us better information.
if (interior_parent_id == remote_elem->id())
{
elem->set_interior_parent
(const_cast<RemoteElem *>(remote_elem));
}
else if (interior_parent_id != DofObject::invalid_id)
{
// If we don't have the interior parent element, then it's
// a remote_elem until we get it.
Elem * ip = mesh->query_elem_ptr(interior_parent_id);
if (!ip )
elem->set_interior_parent
(const_cast<RemoteElem *>(remote_elem));
else
elem->set_interior_parent(ip);
}
}
for (auto n : elem->side_index_range())
{
const dof_id_type neighbor_id =
cast_int<dof_id_type>(*in++);
if (neighbor_id == DofObject::invalid_id)
continue;
// We may be unpacking an element that was a ghost element on the
// sender, in which case the element's neighbors may not all be
// known by the packed element. We'll have to set such
// neighbors to remote_elem ourselves and wait for a later
// packed element to give us better information.
if (neighbor_id == remote_elem->id())
{
elem->set_neighbor(n, const_cast<RemoteElem *>(remote_elem));
continue;
}
// If we don't have the neighbor element, then it's a
// remote_elem until we get it.
Elem * neigh = mesh->query_elem_ptr(neighbor_id);
if (!neigh)
{
elem->set_neighbor(n, const_cast<RemoteElem *>(remote_elem));
continue;
}
// If we have the neighbor element, then link to it, and
// make sure the appropriate parts of its family link back
// to us.
elem->set_neighbor(n, neigh);
elem->make_links_to_me_local(n);
}
elem->unpack_indexing(in);
}
in += elem->packed_indexing_size();
// If this is a coarse element,
// add any element side or edge boundary condition ids
if (level == 0)
{
for (auto s : elem->side_index_range())
{
const boundary_id_type num_bcs =
cast_int<boundary_id_type>(*in++);
for (boundary_id_type bc_it=0; bc_it < num_bcs; bc_it++)
mesh->get_boundary_info().add_side
(elem, s, cast_int<boundary_id_type>(*in++));
}
for (auto e : elem->edge_index_range())
{
const boundary_id_type num_bcs =
cast_int<boundary_id_type>(*in++);
for (boundary_id_type bc_it=0; bc_it < num_bcs; bc_it++)
mesh->get_boundary_info().add_edge
(elem, e, cast_int<boundary_id_type>(*in++));
}
for (unsigned short sf=0; sf != 2; ++sf)
{
const boundary_id_type num_bcs =
cast_int<boundary_id_type>(*in++);
for (boundary_id_type bc_it=0; bc_it < num_bcs; bc_it++)
mesh->get_boundary_info().add_shellface
(elem, sf, cast_int<boundary_id_type>(*in++));
}
}
// Return the new element
return elem;
}