/* This method returns the centerline spacing between an extrusion using this
flow and another one using another flow.
this->spacing(other) shall return the same value as other.spacing(*this) */
float
Flow::spacing(const Flow &other) const {
assert(this->height == other.height);
assert(this->bridge == other.bridge);
if (this->bridge) {
return this->width/2 + other.width/2 + BRIDGE_EXTRA_SPACING;
}
return this->spacing()/2 + other.spacing()/2;
}
/// The LayerRegion at this point of time may contain
/// surfaces of various types (internal/bridge/top/bottom/solid).
/// The infills are generated on the groups of surfaces with a compatible type.
/// Fills an array of ExtrusionPathCollection objects containing the infills generated now
/// and the thin fills generated by generate_perimeters().
void
LayerRegion::make_fill()
{
this->fills.clear();
const double fill_density = this->region()->config.fill_density;
const Flow infill_flow = this->flow(frInfill);
const Flow solid_infill_flow = this->flow(frSolidInfill);
const Flow top_solid_infill_flow = this->flow(frTopSolidInfill);
const coord_t perimeter_spacing = this->flow(frPerimeter).scaled_spacing();
SurfaceCollection surfaces;
// merge adjacent surfaces
// in case of bridge surfaces, the ones with defined angle will be attached to the ones
// without any angle (shouldn't this logic be moved to process_external_surfaces()?)
{
Polygons polygons_bridged;
polygons_bridged.reserve(this->fill_surfaces.surfaces.size());
for (Surfaces::const_iterator it = this->fill_surfaces.surfaces.begin(); it != this->fill_surfaces.surfaces.end(); ++it)
if (it->is_bridge() && it->bridge_angle >= 0)
append_to(polygons_bridged, (Polygons)*it);
// group surfaces by distinct properties (equal surface_type, thickness, thickness_layers, bridge_angle)
// group is of type SurfaceCollection
// FIXME: Use some smart heuristics to merge similar surfaces to eliminate tiny regions.
std::vector<SurfacesConstPtr> groups;
this->fill_surfaces.group(&groups);
// merge compatible solid groups (we can generate continuous infill for them)
{
// cache flow widths and patterns used for all solid groups
// (we'll use them for comparing compatible groups)
std::vector<SurfaceGroupAttrib> group_attrib(groups.size());
for (size_t i = 0; i < groups.size(); ++i) {
const Surface &surface = *groups[i].front();
// we can only merge solid non-bridge surfaces, so discard
// non-solid or bridge surfaces
if (!surface.is_solid() || surface.is_bridge()) continue;
group_attrib[i].is_solid = true;
group_attrib[i].fw = (surface.is_top()) ? top_solid_infill_flow.width : solid_infill_flow.width;
group_attrib[i].pattern = surface.is_top() ? this->region()->config.top_infill_pattern.value
: surface.is_bottom() ? this->region()->config.bottom_infill_pattern.value
: ipRectilinear;
}
// Loop through solid groups, find compatible groups and append them to this one.
for (size_t i = 0; i < groups.size(); ++i) {
if (!group_attrib[i].is_solid)
continue;
for (size_t j = i + 1; j < groups.size();) {
if (group_attrib[i] == group_attrib[j]) {
// groups are compatible, merge them
append_to(groups[i], groups[j]);
groups.erase(groups.begin() + j);
group_attrib.erase(group_attrib.begin() + j);
} else {
++j;
}
}
}
}
// Give priority to oriented bridges. Process the bridges in the first round, the rest of the surfaces in the 2nd round.
for (size_t round = 0; round < 2; ++ round) {
for (std::vector<SurfacesConstPtr>::const_iterator it_group = groups.begin(); it_group != groups.end(); ++ it_group) {
const SurfacesConstPtr &group = *it_group;
const bool is_oriented_bridge = group.front()->is_bridge() && group.front()->bridge_angle >= 0;
if (is_oriented_bridge != (round == 0))
continue;
// Make a union of polygons defining the infiill regions of a group, use a safety offset.
Polygons union_p = union_(to_polygons(group), true);
// Subtract surfaces having a defined bridge_angle from any other, use a safety offset.
if (!is_oriented_bridge && !polygons_bridged.empty())
union_p = diff(union_p, polygons_bridged, true);
// subtract any other surface already processed
//FIXME Vojtech: Because the bridge surfaces came first, they are subtracted twice!
surfaces.append(
diff_ex(union_p, to_polygons(surfaces), true),
*group.front() // template
);
}
}
}
// we need to detect any narrow surfaces that might collapse
// when adding spacing below
// such narrow surfaces are often generated in sloping walls
// by bridge_over_infill() and combine_infill() as a result of the
// subtraction of the combinable area from the layer infill area,
// which leaves small areas near the perimeters
// we are going to grow such regions by overlapping them with the void (if any)
// TODO: detect and investigate whether there could be narrow regions without
// any void neighbors
{
coord_t distance_between_surfaces = std::max(
std::max(infill_flow.scaled_spacing(), solid_infill_flow.scaled_spacing()),
top_solid_infill_flow.scaled_spacing()
);
Polygons surfaces_polygons = (Polygons)surfaces;
Polygons collapsed = diff(
surfaces_polygons,
offset2(surfaces_polygons, -distance_between_surfaces/2, +distance_between_surfaces/2),
true
);
Polygons to_subtract;
surfaces.filter_by_type((stInternal | stVoid), &to_subtract);
append_to(to_subtract, collapsed);
surfaces.append(
intersection_ex(
offset(collapsed, distance_between_surfaces),
to_subtract,
true
),
(stInternal | stSolid)
);
}
if (false) {
// require "Slic3r/SVG.pm";
// Slic3r::SVG::output("fill_" . $layerm->print_z . ".svg",
// expolygons => [ map $_->expolygon, grep !$_->is_solid, @surfaces ],
// red_expolygons => [ map $_->expolygon, grep $_->is_solid, @surfaces ],
// );
}
for (Surfaces::const_iterator surface_it = surfaces.surfaces.begin();
surface_it != surfaces.surfaces.end(); ++surface_it) {
const Surface &surface = *surface_it;
if (surface.surface_type == (stInternal | stVoid))
continue;
InfillPattern fill_pattern = this->region()->config.fill_pattern.value;
double density = fill_density;
FlowRole role = (surface.is_top()) ? frTopSolidInfill
: surface.is_solid() ? frSolidInfill
: frInfill;
const bool is_bridge = this->layer()->id() > 0 && surface.is_bridge();
if (surface.is_solid()) {
density = 100.;
fill_pattern = (surface.is_top()) ? this->region()->config.top_infill_pattern.value
: (surface.is_bottom() && !is_bridge) ? this->region()->config.bottom_infill_pattern.value
: ipRectilinear;
} else if (density <= 0)
continue;
// get filler object
#if SLIC3R_CPPVER >= 11
std::unique_ptr<Fill> f = std::unique_ptr<Fill>(Fill::new_from_type(fill_pattern));
#else
std::auto_ptr<Fill> f = std::auto_ptr<Fill>(Fill::new_from_type(fill_pattern));
#endif
// switch to rectilinear if this pattern doesn't support solid infill
if (density > 99 && !f->can_solid())
#if SLIC3R_CPPVER >= 11
f = std::unique_ptr<Fill>(Fill::new_from_type(ipRectilinear));
#else
f = std::auto_ptr<Fill>(Fill::new_from_type(ipRectilinear));
#endif
f->bounding_box = this->layer()->object()->bounding_box();
// calculate the actual flow we'll be using for this infill
coordf_t h = (surface.thickness == -1) ? this->layer()->height : surface.thickness;
Flow flow = this->region()->flow(
role,
h,
is_bridge || f->use_bridge_flow(), // bridge flow?
this->layer()->id() == 0, // first layer?
-1, // auto width
*this->layer()->object()
);
// calculate flow spacing for infill pattern generation
bool using_internal_flow = false;
if (!surface.is_solid() && !is_bridge) {
// it's internal infill, so we can calculate a generic flow spacing
// for all layers, for avoiding the ugly effect of
// misaligned infill on first layer because of different extrusion width and
// layer height
Flow internal_flow = this->region()->flow(
frInfill,
h, // use the calculated surface thickness here for internal infill instead of the layer height to account for infill_every_layers
false, // no bridge
false, // no first layer
-1, // auto width
*this->layer()->object()
);
f->min_spacing = internal_flow.spacing();
using_internal_flow = true;
} else {
f->min_spacing = flow.spacing();
}
f->endpoints_overlap = scale_(this->region()->config.get_abs_value("infill_overlap",
(unscale(perimeter_spacing) + (f->min_spacing))/2));
f->layer_id = this->layer()->id();
f->z = this->layer()->print_z;
f->angle = Geometry::deg2rad(this->region()->config.fill_angle.value);
// Maximum length of the perimeter segment linking two infill lines.
f->link_max_length = (!is_bridge && density > 80)
? scale_(3 * f->min_spacing)
: 0;
// Used by the concentric infill pattern to clip the loops to create extrusion paths.
f->loop_clipping = scale_(flow.nozzle_diameter) * LOOP_CLIPPING_LENGTH_OVER_NOZZLE_DIAMETER;
// apply half spacing using this flow's own spacing and generate infill
f->density = density/100;
f->dont_adjust = false;
/*
std::cout << surface.expolygon.dump_perl() << std::endl
<< " layer_id: " << f->layer_id << " z: " << f->z
<< " angle: " << f->angle << " min-spacing: " << f->min_spacing
<< " endpoints_overlap: " << f->endpoints_overlap << std::endl << std::endl;
*/
Polylines polylines = f->fill_surface(surface);
if (polylines.empty())
continue;
// calculate actual flow from spacing (which might have been adjusted by the infill
// pattern generator)
if (using_internal_flow) {
// if we used the internal flow we're not doing a solid infill
// so we can safely ignore the slight variation that might have
// been applied to f->spacing()
} else {
flow = Flow::new_from_spacing(f->spacing(), flow.nozzle_diameter, h, is_bridge || f->use_bridge_flow());
}
// Save into layer.
ExtrusionEntityCollection* coll = new ExtrusionEntityCollection();
coll->no_sort = f->no_sort();
this->fills.entities.push_back(coll);
{
ExtrusionRole role;
if (is_bridge) {
role = erBridgeInfill;
} else if (surface.is_solid()) {
role = (surface.is_top()) ? erTopSolidInfill : erSolidInfill;
} else {
role = erInternalInfill;
}
ExtrusionPath templ(role);
templ.mm3_per_mm = flow.mm3_per_mm();
templ.width = flow.width;
templ.height = flow.height;
coll->append(STDMOVE(polylines), templ);
}
}
// add thin fill regions
// thin_fills are of C++ Slic3r::ExtrusionEntityCollection, perl type Slic3r::ExtrusionPath::Collection
// Unpacks the collection, creates multiple collections per path so that they will
// be individually included in the nearest neighbor search.
// The path type could be ExtrusionPath, ExtrusionLoop or ExtrusionEntityCollection.
for (ExtrusionEntitiesPtr::const_iterator thin_fill = this->thin_fills.entities.begin(); thin_fill != this->thin_fills.entities.end(); ++ thin_fill) {
ExtrusionEntityCollection* coll = new ExtrusionEntityCollection();
this->fills.entities.push_back(coll);
coll->append(**thin_fill);
}
}