void GRIBDataset::SetGribMetaData(grib_MetaData* meta)
{
nRasterXSize = meta->gds.Nx;
nRasterYSize = meta->gds.Ny;
/* -------------------------------------------------------------------- */
/* Image projection. */
/* -------------------------------------------------------------------- */
OGRSpatialReference oSRS;
switch(meta->gds.projType)
{
case GS3_LATLON:
case GS3_GAUSSIAN_LATLON:
// No projection, only latlon system (geographic)
break;
case GS3_MERCATOR:
oSRS.SetMercator(meta->gds.meshLat, meta->gds.orientLon,
1.0, 0.0, 0.0);
break;
case GS3_POLAR:
oSRS.SetPS(meta->gds.meshLat, meta->gds.orientLon,
meta->gds.scaleLat1,
0.0, 0.0);
break;
case GS3_LAMBERT:
oSRS.SetLCC(meta->gds.scaleLat1, meta->gds.scaleLat2,
0.0, meta->gds.orientLon,
0.0, 0.0); // set projection
break;
case GS3_ORTHOGRAPHIC:
//oSRS.SetOrthographic(0.0, meta->gds.orientLon,
// meta->gds.lon2, meta->gds.lat2);
//oSRS.SetGEOS(meta->gds.orientLon, meta->gds.stretchFactor, meta->gds.lon2, meta->gds.lat2);
oSRS.SetGEOS( 0, 35785831, 0, 0 ); // hardcoded for now, I don't know yet how to parse the meta->gds section
break;
case GS3_EQUATOR_EQUIDIST:
break;
case GS3_AZIMUTH_RANGE:
break;
}
/* -------------------------------------------------------------------- */
/* Earth model */
/* -------------------------------------------------------------------- */
double a = meta->gds.majEarth * 1000.0; // in meters
double b = meta->gds.minEarth * 1000.0;
if( a == 0 && b == 0 )
{
a = 6377563.396;
b = 6356256.910;
}
if (meta->gds.f_sphere)
{
oSRS.SetGeogCS( "Coordinate System imported from GRIB file",
NULL,
"Sphere",
a, 0.0 );
}
else
{
double fInv = a/(a-b);
oSRS.SetGeogCS( "Coordinate System imported from GRIB file",
NULL,
"Spheroid imported from GRIB file",
a, fInv );
}
OGRSpatialReference oLL; // construct the "geographic" part of oSRS
oLL.CopyGeogCSFrom( &oSRS );
double rMinX;
double rMaxY;
double rPixelSizeX;
double rPixelSizeY;
if (meta->gds.projType == GS3_ORTHOGRAPHIC)
{
//rMinX = -meta->gds.Dx * (meta->gds.Nx / 2); // This is what should work, but it doesn't .. Dx seems to have an inverse relation with pixel size
//rMaxY = meta->gds.Dy * (meta->gds.Ny / 2);
const double geosExtentInMeters = 11137496.552; // hardcoded for now, assumption: GEOS projection, full disc (like MSG)
rMinX = -(geosExtentInMeters / 2);
rMaxY = geosExtentInMeters / 2;
rPixelSizeX = geosExtentInMeters / meta->gds.Nx;
rPixelSizeY = geosExtentInMeters / meta->gds.Ny;
}
else if( oSRS.IsProjected() )
{
rMinX = meta->gds.lon1; // longitude in degrees, to be transformed to meters (or degrees in case of latlon)
rMaxY = meta->gds.lat1; // latitude in degrees, to be transformed to meters
OGRCoordinateTransformation *poTransformLLtoSRS = OGRCreateCoordinateTransformation( &(oLL), &(oSRS) );
if ((poTransformLLtoSRS != NULL) && poTransformLLtoSRS->Transform( 1, &rMinX, &rMaxY )) // transform it to meters
{
if (meta->gds.scan == GRIB2BIT_2) // Y is minY, GDAL wants maxY
rMaxY += (meta->gds.Ny - 1) * meta->gds.Dy; // -1 because we GDAL needs the coordinates of the centre of the pixel
rPixelSizeX = meta->gds.Dx;
rPixelSizeY = meta->gds.Dy;
}
else
{
rMinX = 0.0;
rMaxY = 0.0;
rPixelSizeX = 1.0;
rPixelSizeY = -1.0;
oSRS.Clear();
CPLError( CE_Warning, CPLE_AppDefined,
"Unable to perform coordinate transformations, so the correct\n"
"projected geotransform could not be deduced from the lat/long\n"
"control points. Defaulting to ungeoreferenced." );
}
delete poTransformLLtoSRS;
}
else
{
rMinX = meta->gds.lon1; // longitude in degrees, to be transformed to meters (or degrees in case of latlon)
rMaxY = meta->gds.lat1; // latitude in degrees, to be transformed to meters
if (meta->gds.lat2 > rMaxY)
rMaxY = meta->gds.lat2;
rPixelSizeX = meta->gds.Dx;
rPixelSizeY = meta->gds.Dy;
}
adfGeoTransform[0] = rMinX;
adfGeoTransform[3] = rMaxY;
adfGeoTransform[1] = rPixelSizeX;
adfGeoTransform[5] = -rPixelSizeY;
CPLFree( pszProjection );
pszProjection = NULL;
oSRS.exportToWkt( &(pszProjection) );
}
void PDSDataset::ParseSRS()
{
const char *pszFilename = GetDescription();
/* ==================================================================== */
/* Get the geotransform. */
/* ==================================================================== */
/*********** Grab Cellsize ************/
//example:
//MAP_SCALE = 14.818 <KM/PIXEL>
//added search for unit (only checks for CM, KM - defaults to Meters)
const char *value;
//Georef parameters
double dfULXMap=0.5;
double dfULYMap = 0.5;
double dfXDim = 1.0;
double dfYDim = 1.0;
double xulcenter = 0.0;
double yulcenter = 0.0;
value = GetKeyword("IMAGE_MAP_PROJECTION.MAP_SCALE");
if (strlen(value) > 0 ) {
dfXDim = atof(value);
dfYDim = atof(value) * -1;
CPLString unit = GetKeywordUnit("IMAGE_MAP_PROJECTION.MAP_SCALE",2); //KM
//value = GetKeywordUnit("IMAGE_MAP_PROJECTION.MAP_SCALE",3); //PIXEL
if((EQUAL(unit,"M")) || (EQUAL(unit,"METER")) || (EQUAL(unit,"METERS"))) {
// do nothing
}
else if (EQUAL(unit,"CM")) {
// convert from cm to m
dfXDim = dfXDim / 100.0;
dfYDim = dfYDim / 100.0;
} else {
//defaults to convert km to m
dfXDim = dfXDim * 1000.0;
dfYDim = dfYDim * 1000.0;
}
}
/* -------------------------------------------------------------------- */
/* Calculate upper left corner of pixel in meters from the */
/* upper left center pixel sample/line offsets. It doesn't */
/* mean the defaults will work for every PDS image, as these */
/* values are used inconsistantly. Thus we have included */
/* conversion options to allow the user to override the */
/* documented PDS3 default. Jan. 2011, for known mapping issues */
/* see GDAL PDS page or mapping within ISIS3 source (USGS) */
/* $ISIS3DATA/base/translations/pdsProjectionLineSampToXY.def */
/* -------------------------------------------------------------------- */
// defaults should be correct for what is documented in the PDS3 standard
double dfSampleOffset_Shift;
double dfLineOffset_Shift;
double dfSampleOffset_Mult;
double dfLineOffset_Mult;
dfSampleOffset_Shift =
atof(CPLGetConfigOption( "PDS_SampleProjOffset_Shift", "-0.5" ));
dfLineOffset_Shift =
atof(CPLGetConfigOption( "PDS_LineProjOffset_Shift", "-0.5" ));
dfSampleOffset_Mult =
atof(CPLGetConfigOption( "PDS_SampleProjOffset_Mult", "-1.0") );
dfLineOffset_Mult =
atof( CPLGetConfigOption( "PDS_LineProjOffset_Mult", "1.0") );
/*********** Grab LINE_PROJECTION_OFFSET ************/
value = GetKeyword("IMAGE_MAP_PROJECTION.LINE_PROJECTION_OFFSET");
if (strlen(value) > 0) {
yulcenter = atof(value);
dfULYMap = ((yulcenter + dfLineOffset_Shift) * -dfYDim * dfLineOffset_Mult);
//notice dfYDim is negative here which is why it is again negated here
}
/*********** Grab SAMPLE_PROJECTION_OFFSET ************/
value = GetKeyword("IMAGE_MAP_PROJECTION.SAMPLE_PROJECTION_OFFSET");
if( strlen(value) > 0 ) {
xulcenter = atof(value);
dfULXMap = ((xulcenter + dfSampleOffset_Shift) * dfXDim * dfSampleOffset_Mult);
}
/* ==================================================================== */
/* Get the coordinate system. */
/* ==================================================================== */
int bProjectionSet = TRUE;
double semi_major = 0.0;
double semi_minor = 0.0;
double iflattening = 0.0;
double center_lat = 0.0;
double center_lon = 0.0;
double first_std_parallel = 0.0;
double second_std_parallel = 0.0;
OGRSpatialReference oSRS;
/*********** Grab TARGET_NAME ************/
/**** This is the planets name i.e. MARS ***/
CPLString target_name = GetKeyword("TARGET_NAME");
CleanString( target_name );
/********** Grab MAP_PROJECTION_TYPE *****/
CPLString map_proj_name =
GetKeyword( "IMAGE_MAP_PROJECTION.MAP_PROJECTION_TYPE");
CleanString( map_proj_name );
/****** Grab semi_major & convert to KM ******/
semi_major =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.A_AXIS_RADIUS")) * 1000.0;
/****** Grab semi-minor & convert to KM ******/
semi_minor =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.C_AXIS_RADIUS")) * 1000.0;
/*********** Grab CENTER_LAT ************/
center_lat =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.CENTER_LATITUDE"));
/*********** Grab CENTER_LON ************/
center_lon =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.CENTER_LONGITUDE"));
/********** Grab 1st std parallel *******/
first_std_parallel =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.FIRST_STANDARD_PARALLEL"));
/********** Grab 2nd std parallel *******/
second_std_parallel =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.SECOND_STANDARD_PARALLEL"));
/*** grab PROJECTION_LATITUDE_TYPE = "PLANETOCENTRIC" ****/
// Need to further study how ocentric/ographic will effect the gdal library.
// So far we will use this fact to define a sphere or ellipse for some projections
// Frank - may need to talk this over
char bIsGeographic = TRUE;
value = GetKeyword("IMAGE_MAP_PROJECTION.COORDINATE_SYSTEM_NAME");
if (EQUAL( value, "PLANETOCENTRIC" ))
bIsGeographic = FALSE;
/** Set oSRS projection and parameters --- all PDS supported types added if apparently supported in oSRS
"AITOFF", ** Not supported in GDAL??
"ALBERS",
"BONNE",
"BRIESEMEISTER", ** Not supported in GDAL??
"CYLINDRICAL EQUAL AREA",
"EQUIDISTANT",
"EQUIRECTANGULAR",
"GNOMONIC",
"HAMMER", ** Not supported in GDAL??
"HENDU", ** Not supported in GDAL??
"LAMBERT AZIMUTHAL EQUAL AREA",
"LAMBERT CONFORMAL",
"MERCATOR",
"MOLLWEIDE",
"OBLIQUE CYLINDRICAL",
"ORTHOGRAPHIC",
"SIMPLE CYLINDRICAL",
"SINUSOIDAL",
"STEREOGRAPHIC",
"TRANSVERSE MERCATOR",
"VAN DER GRINTEN", ** Not supported in GDAL??
"WERNER" ** Not supported in GDAL??
**/
CPLDebug( "PDS","using projection %s\n\n", map_proj_name.c_str());
if ((EQUAL( map_proj_name, "EQUIRECTANGULAR" )) ||
(EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ) {
oSRS.SetEquirectangular2 ( 0.0, center_lon, center_lat, 0, 0 );
} else if (EQUAL( map_proj_name, "ORTHOGRAPHIC" )) {
oSRS.SetOrthographic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "SINUSOIDAL" )) {
oSRS.SetSinusoidal ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MERCATOR" )) {
oSRS.SetMercator ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "STEREOGRAPHIC" )) {
oSRS.SetStereographic ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC")) {
oSRS.SetPS ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "TRANSVERSE_MERCATOR" )) {
oSRS.SetTM ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_CONFORMAL_CONIC" )) {
oSRS.SetLCC ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_AZIMUTHAL_EQUAL_AREA" )) {
oSRS.SetLAEA( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "CYLINDRICAL_EQUAL_AREA" )) {
oSRS.SetCEA ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MOLLWEIDE" )) {
oSRS.SetMollweide ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "ALBERS" )) {
oSRS.SetACEA ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "BONNE" )) {
oSRS.SetBonne ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "GNOMONIC" )) {
oSRS.SetGnomonic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "OBLIQUE_CYLINDRICAL" )) {
// hope Swiss Oblique Cylindrical is the same
oSRS.SetSOC ( center_lat, center_lon, 0, 0 );
} else {
CPLDebug( "PDS",
"Dataset projection %s is not supported. Continuing...",
map_proj_name.c_str() );
bProjectionSet = FALSE;
}
if (bProjectionSet) {
//Create projection name, i.e. MERCATOR MARS and set as ProjCS keyword
CPLString proj_target_name = map_proj_name + " " + target_name;
oSRS.SetProjCS(proj_target_name); //set ProjCS keyword
//The geographic/geocentric name will be the same basic name as the body name
//'GCS' = Geographic/Geocentric Coordinate System
CPLString geog_name = "GCS_" + target_name;
//The datum and sphere names will be the same basic name aas the planet
CPLString datum_name = "D_" + target_name;
CPLString sphere_name = target_name; // + "_IAU_IAG"); //Might not be IAU defined so don't add
//calculate inverse flattening from major and minor axis: 1/f = a/(a-b)
if ((semi_major - semi_minor) < 0.0000001)
iflattening = 0;
else
iflattening = semi_major / (semi_major - semi_minor);
//Set the body size but take into consideration which proj is being used to help w/ compatibility
//Notice that most PDS projections are spherical based on the fact that ISIS/PICS are spherical
//Set the body size but take into consideration which proj is being used to help w/ proj4 compatibility
//The use of a Sphere, polar radius or ellipse here is based on how ISIS does it internally
if ( ( (EQUAL( map_proj_name, "STEREOGRAPHIC" ) && (fabs(center_lat) == 90)) ) ||
(EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC" )))
{
if (bIsGeographic) {
//Geograpraphic, so set an ellipse
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere using the semi-minor axis. I hope...
sphere_name += "_polarRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_minor, 0.0,
"Reference_Meridian", 0.0 );
}
}
else if ( (EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ||
(EQUAL( map_proj_name, "ORTHOGRAPHIC" )) ||
(EQUAL( map_proj_name, "STEREOGRAPHIC" )) ||
(EQUAL( map_proj_name, "SINUSOIDAL" )) ) {
//isis uses the spherical equation for these projections so force a sphere
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else if (EQUAL( map_proj_name, "EQUIRECTANGULAR" )) {
//isis uses local radius as a sphere, which is pre-calculated in the PDS label as the semi-major
sphere_name += "_localRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else {
//All other projections: Mercator, Transverse Mercator, Lambert Conformal, etc.
//Geographic, so set an ellipse
if (bIsGeographic) {
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere. I hope...
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
}
// translate back into a projection string.
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
osProjection = pszResult;
CPLFree( pszResult );
}
/* ==================================================================== */
/* Check for a .prj and world file to override the georeferencing. */
/* ==================================================================== */
{
CPLString osPath, osName;
VSILFILE *fp;
osPath = CPLGetPath( pszFilename );
osName = CPLGetBasename(pszFilename);
const char *pszPrjFile = CPLFormCIFilename( osPath, osName, "prj" );
fp = VSIFOpenL( pszPrjFile, "r" );
if( fp != NULL )
{
char **papszLines;
OGRSpatialReference oSRS;
VSIFCloseL( fp );
papszLines = CSLLoad( pszPrjFile );
if( oSRS.importFromESRI( papszLines ) == OGRERR_NONE )
{
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
osProjection = pszResult;
CPLFree( pszResult );
}
CSLDestroy( papszLines );
}
}
if( dfULYMap != 0.5 || dfULYMap != 0.5 || dfXDim != 1.0 || dfYDim != 1.0 )
{
bGotTransform = TRUE;
adfGeoTransform[0] = dfULXMap;
adfGeoTransform[1] = dfXDim;
adfGeoTransform[2] = 0.0;
adfGeoTransform[3] = dfULYMap;
adfGeoTransform[4] = 0.0;
adfGeoTransform[5] = dfYDim;
}
if( !bGotTransform )
bGotTransform =
GDALReadWorldFile( pszFilename, "psw",
adfGeoTransform );
if( !bGotTransform )
bGotTransform =
GDALReadWorldFile( pszFilename, "wld",
adfGeoTransform );
}
/**
* Captures Geolocation information from a COSMO-SKYMED
* file.
* The geoid will allways be WGS84
* The projection type may be UTM or UPS, depending on the
* latitude from the center of the image.
* @param iProductType type of CSK subproduct, see HDF5CSKProduct
*/
void HDF5ImageDataset::CaptureCSKGeolocation(int iProductType)
{
double *dfProjFalseEastNorth;
double *dfProjScaleFactor;
double *dfCenterCoord;
//Set the ellipsoid to WGS84
oSRS.SetWellKnownGeogCS( "WGS84" );
if(iProductType == PROD_CSK_L1C||iProductType == PROD_CSK_L1D)
{
//Check if all the metadata attributes are present
if(HDF5ReadDoubleAttr("Map Projection False East-North", &dfProjFalseEastNorth) == CE_Failure||
HDF5ReadDoubleAttr("Map Projection Scale Factor", &dfProjScaleFactor) == CE_Failure||
HDF5ReadDoubleAttr("Map Projection Centre", &dfCenterCoord) == CE_Failure||
GetMetadataItem("Projection_ID") == NULL)
{
pszProjection = CPLStrdup("");
pszGCPProjection = CPLStrdup("");
CPLError( CE_Failure, CPLE_OpenFailed,
"The CSK hdf5 file geolocation information is malformed\n" );
}
else
{
//Fetch projection Type
CPLString osProjectionID = GetMetadataItem("Projection_ID");
//If the projection is UTM
if(EQUAL(osProjectionID,"UTM"))
{
// @TODO: use SetUTM
oSRS.SetProjCS(SRS_PT_TRANSVERSE_MERCATOR);
oSRS.SetTM(dfCenterCoord[0],
dfCenterCoord[1],
dfProjScaleFactor[0],
dfProjFalseEastNorth[0],
dfProjFalseEastNorth[1]);
}
else
{
//TODO Test! I didn't had any UPS projected files to test!
//If the projection is UPS
if(EQUAL(osProjectionID,"UPS"))
{
oSRS.SetProjCS(SRS_PT_POLAR_STEREOGRAPHIC);
oSRS.SetPS(dfCenterCoord[0],
dfCenterCoord[1],
dfProjScaleFactor[0],
dfProjFalseEastNorth[0],
dfProjFalseEastNorth[1]);
}
}
//Export Projection to Wkt.
//In case of error then clean the projection
if (oSRS.exportToWkt(&pszProjection) != OGRERR_NONE)
pszProjection = CPLStrdup("");
CPLFree(dfCenterCoord);
CPLFree(dfProjScaleFactor);
CPLFree(dfProjFalseEastNorth);
}
}
else
{
//Export GCPProjection to Wkt.
//In case of error then clean the projection
if(oSRS.exportToWkt(&pszGCPProjection) != OGRERR_NONE)
pszGCPProjection = CPLStrdup("");
}
}
GDALDataset *VICARDataset::Open( GDALOpenInfo * poOpenInfo )
{
/* -------------------------------------------------------------------- */
/* Does this look like a VICAR dataset? */
/* -------------------------------------------------------------------- */
if( !Identify( poOpenInfo ) )
return NULL;
/* -------------------------------------------------------------------- */
/* Open the file using the large file API. */
/* -------------------------------------------------------------------- */
VSILFILE *fpQube = VSIFOpenL( poOpenInfo->pszFilename, "rb" );
if( fpQube == NULL )
return NULL;
VICARDataset *poDS = new VICARDataset();
if( ! poDS->oKeywords.Ingest( fpQube, poOpenInfo->pabyHeader ) ) {
VSIFCloseL( fpQube );
delete poDS;
return NULL;
}
VSIFCloseL( fpQube );
/***** CHECK ENDIANNESS **************/
const char *value = poDS->GetKeyword( "INTFMT" );
if (!EQUAL(value,"LOW") ) {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return FALSE;
}
value = poDS->GetKeyword( "REALFMT" );
if (!EQUAL(value,"RIEEE") ) {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return FALSE;
}
char chByteOrder = 'M';
value = poDS->GetKeyword( "BREALFMT" );
if (EQUAL(value,"VAX") ) {
chByteOrder = 'I';
}
/************ CHECK INSTRUMENT *****************/
/************ ONLY HRSC TESTED *****************/
bool bIsDTM = false;
value = poDS->GetKeyword( "DTM.DTM_OFFSET" );
if (!EQUAL(value,"") ) {
bIsDTM = true;
}
value = poDS->GetKeyword( "BLTYPE" );
if (!EQUAL(value,"M94_HRSC") && !bIsDTM ) {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s instrument not tested. Continue with caution!\n\n", value);
}
/*********** Grab layout type (BSQ, BIP, BIL) ************/
char szLayout[10] = "BSQ"; //default to band seq.
value = poDS->GetKeyword( "ORG" );
if (!EQUAL(value,"BSQ") )
{
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return FALSE;
}
strcpy(szLayout,"BSQ");
const int nCols = atoi(poDS->GetKeyword("NS"));
const int nRows = atoi(poDS->GetKeyword("NL"));
const int nBands = atoi(poDS->GetKeyword("NB"));
/*********** Grab record bytes **********/
int nSkipBytes = atoi(poDS->GetKeyword("NBB"));
GDALDataType eDataType = GDT_Byte;
double dfNoData = 0.0;
if (EQUAL( poDS->GetKeyword( "FORMAT" ), "BYTE" )) {
eDataType = GDT_Byte;
dfNoData = NULL1;
}
else if (EQUAL( poDS->GetKeyword( "FORMAT" ), "HALF" )) {
eDataType = GDT_Int16;
dfNoData = NULL2;
chByteOrder = 'I';
}
else if (EQUAL( poDS->GetKeyword( "FORMAT" ), "FULL" )) {
eDataType = GDT_UInt32;
dfNoData = 0;
}
else if (EQUAL( poDS->GetKeyword( "FORMAT" ), "REAL" )) {
eDataType = GDT_Float32;
dfNoData = NULL3;
chByteOrder = 'I';
}
else {
CPLError( CE_Failure, CPLE_AppDefined,
"Could not find known VICAR label entries!\n");
delete poDS;
return NULL;
}
if( nRows < 1 || nCols < 1 || nBands < 1 )
{
CPLError( CE_Failure, CPLE_AppDefined,
"File %s appears to be a VICAR file, but failed to find some "
"required keywords.",
poDS->GetDescription() );
return FALSE;
}
/* -------------------------------------------------------------------- */
/* Capture some information from the file that is of interest. */
/* -------------------------------------------------------------------- */
poDS->nRasterXSize = nCols;
poDS->nRasterYSize = nRows;
double dfULXMap=0.5;
double dfULYMap = 0.5;
double dfXDim = 1.0;
double dfYDim = 1.0;
double xulcenter = 0.0;
double yulcenter = 0.0;
value = poDS->GetKeyword("MAP.MAP_SCALE");
if (strlen(value) > 0 ) {
dfXDim = CPLAtof(value);
dfYDim = CPLAtof(value) * -1;
dfXDim = dfXDim * 1000.0;
dfYDim = dfYDim * 1000.0;
}
double dfSampleOffset_Shift =
CPLAtof(CPLGetConfigOption( "PDS_SampleProjOffset_Shift", "-0.5" ));
double dfLineOffset_Shift =
CPLAtof(CPLGetConfigOption( "PDS_LineProjOffset_Shift", "-0.5" ));
double dfSampleOffset_Mult =
CPLAtof(CPLGetConfigOption( "PDS_SampleProjOffset_Mult", "-1.0") );
double dfLineOffset_Mult =
CPLAtof( CPLGetConfigOption( "PDS_LineProjOffset_Mult", "1.0") );
/*********** Grab LINE_PROJECTION_OFFSET ************/
value = poDS->GetKeyword("MAP.LINE_PROJECTION_OFFSET");
if (strlen(value) > 0) {
yulcenter = CPLAtof(value);
dfULYMap = ((yulcenter + dfLineOffset_Shift) * -dfYDim * dfLineOffset_Mult);
}
/*********** Grab SAMPLE_PROJECTION_OFFSET ************/
value = poDS->GetKeyword("MAP.SAMPLE_PROJECTION_OFFSET");
if( strlen(value) > 0 ) {
xulcenter = CPLAtof(value);
dfULXMap = ((xulcenter + dfSampleOffset_Shift) * dfXDim * dfSampleOffset_Mult);
}
/* ==================================================================== */
/* Get the coordinate system. */
/* ==================================================================== */
bool bProjectionSet = true;
/*********** Grab TARGET_NAME ************/
/**** This is the planets name i.e. MARS ***/
const CPLString target_name = poDS->GetKeyword("MAP.TARGET_NAME");
/********** Grab MAP_PROJECTION_TYPE *****/
const CPLString map_proj_name
= poDS->GetKeyword( "MAP.MAP_PROJECTION_TYPE");
/****** Grab semi_major & convert to KM ******/
const double semi_major
= CPLAtof(poDS->GetKeyword( "MAP.A_AXIS_RADIUS")) * 1000.0;
/****** Grab semi-minor & convert to KM ******/
const double semi_minor
= CPLAtof(poDS->GetKeyword( "MAP.C_AXIS_RADIUS")) * 1000.0;
/*********** Grab CENTER_LAT ************/
const double center_lat =
CPLAtof(poDS->GetKeyword( "MAP.CENTER_LATITUDE"));
/*********** Grab CENTER_LON ************/
const double center_lon
= CPLAtof(poDS->GetKeyword( "MAP.CENTER_LONGITUDE"));
/********** Grab 1st std parallel *******/
const double first_std_parallel =
CPLAtof(poDS->GetKeyword( "MAP.FIRST_STANDARD_PARALLEL"));
/********** Grab 2nd std parallel *******/
const double second_std_parallel =
CPLAtof(poDS->GetKeyword( "MAP.SECOND_STANDARD_PARALLEL"));
/*** grab PROJECTION_LATITUDE_TYPE = "PLANETOCENTRIC" ****/
// Need to further study how ocentric/ographic will effect the gdal library.
// So far we will use this fact to define a sphere or ellipse for some projections
// Frank - may need to talk this over
bool bIsGeographic = true;
value = poDS->GetKeyword("MAP.COORDINATE_SYSTEM_NAME");
if (EQUAL( value, "PLANETOCENTRIC" ))
bIsGeographic = false;
/** Set oSRS projection and parameters --- all PDS supported types added if apparently supported in oSRS
"AITOFF", ** Not supported in GDAL??
"ALBERS",
"BONNE",
"BRIESEMEISTER", ** Not supported in GDAL??
"CYLINDRICAL EQUAL AREA",
"EQUIDISTANT",
"EQUIRECTANGULAR",
"GNOMONIC",
"HAMMER", ** Not supported in GDAL??
"HENDU", ** Not supported in GDAL??
"LAMBERT AZIMUTHAL EQUAL AREA",
"LAMBERT CONFORMAL",
"MERCATOR",
"MOLLWEIDE",
"OBLIQUE CYLINDRICAL",
"ORTHOGRAPHIC",
"SIMPLE CYLINDRICAL",
"SINUSOIDAL",
"STEREOGRAPHIC",
"TRANSVERSE MERCATOR",
"VAN DER GRINTEN", ** Not supported in GDAL??
"WERNER" ** Not supported in GDAL??
**/
CPLDebug( "PDS", "using projection %s\n\n", map_proj_name.c_str());
OGRSpatialReference oSRS;
if ((EQUAL( map_proj_name, "EQUIRECTANGULAR" )) ||
(EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ) {
oSRS.SetEquirectangular2 ( 0.0, center_lon, center_lat, 0, 0 );
} else if (EQUAL( map_proj_name, "ORTHOGRAPHIC" )) {
oSRS.SetOrthographic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "SINUSOIDAL" )) {
oSRS.SetSinusoidal ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MERCATOR" )) {
oSRS.SetMercator ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "STEREOGRAPHIC" )) {
oSRS.SetStereographic ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC")) {
oSRS.SetPS ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "TRANSVERSE_MERCATOR" )) {
oSRS.SetTM ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_CONFORMAL_CONIC" )) {
oSRS.SetLCC ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_AZIMUTHAL_EQUAL_AREA" )) {
oSRS.SetLAEA( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "CYLINDRICAL_EQUAL_AREA" )) {
oSRS.SetCEA ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MOLLWEIDE" )) {
oSRS.SetMollweide ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "ALBERS" )) {
oSRS.SetACEA ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "BONNE" )) {
oSRS.SetBonne ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "GNOMONIC" )) {
oSRS.SetGnomonic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "OBLIQUE_CYLINDRICAL" )) {
// hope Swiss Oblique Cylindrical is the same
oSRS.SetSOC ( center_lat, center_lon, 0, 0 );
} else {
CPLDebug( "VICAR",
"Dataset projection %s is not supported. Continuing...",
map_proj_name.c_str() );
bProjectionSet = false;
}
if (bProjectionSet) {
//Create projection name, i.e. MERCATOR MARS and set as ProjCS keyword
CPLString proj_target_name = map_proj_name + " " + target_name;
oSRS.SetProjCS(proj_target_name); //set ProjCS keyword
//The geographic/geocentric name will be the same basic name as the body name
//'GCS' = Geographic/Geocentric Coordinate System
CPLString geog_name = "GCS_" + target_name;
//The datum and sphere names will be the same basic name aas the planet
CPLString datum_name = "D_" + target_name;
CPLString sphere_name = target_name; // + "_IAU_IAG"); //Might not be IAU defined so don't add
//calculate inverse flattening from major and minor axis: 1/f = a/(a-b)
double iflattening = 0.0;
if ((semi_major - semi_minor) < 0.0000001)
iflattening = 0;
else
iflattening = semi_major / (semi_major - semi_minor);
//Set the body size but take into consideration which proj is being used to help w/ compatibility
//Notice that most PDS projections are spherical based on the fact that ISIS/PICS are spherical
//Set the body size but take into consideration which proj is being used to help w/ proj4 compatibility
//The use of a Sphere, polar radius or ellipse here is based on how ISIS does it internally
if ( ( (EQUAL( map_proj_name, "STEREOGRAPHIC" ) && (fabs(center_lat) == 90)) ) ||
(EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC" )))
{
if (bIsGeographic) {
//Geograpraphic, so set an ellipse
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere using the semi-minor axis. I hope...
sphere_name += "_polarRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_minor, 0.0,
"Reference_Meridian", 0.0 );
}
}
else if ( (EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ||
(EQUAL( map_proj_name, "ORTHOGRAPHIC" )) ||
(EQUAL( map_proj_name, "STEREOGRAPHIC" )) ||
(EQUAL( map_proj_name, "SINUSOIDAL" )) ) {
//isis uses the spherical equation for these projections so force a sphere
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else if (EQUAL( map_proj_name, "EQUIRECTANGULAR" )) {
//isis uses local radius as a sphere, which is pre-calculated in the PDS label as the semi-major
sphere_name += "_localRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else
{
//All other projections: Mercator, Transverse Mercator, Lambert Conformal, etc.
//Geographic, so set an ellipse
if (bIsGeographic) {
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
}
else
{
//Geocentric, so force a sphere. I hope...
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
}
// translate back into a projection string.
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
poDS->osProjection = pszResult;
CPLFree( pszResult );
}
{
poDS->bGotTransform = TRUE;
poDS->adfGeoTransform[0] = dfULXMap;
poDS->adfGeoTransform[1] = dfXDim;
poDS->adfGeoTransform[2] = 0.0;
poDS->adfGeoTransform[3] = dfULYMap;
poDS->adfGeoTransform[4] = 0.0;
poDS->adfGeoTransform[5] = dfYDim;
}
CPLString osQubeFile = poOpenInfo->pszFilename;
if( !poDS->bGotTransform )
poDS->bGotTransform =
GDALReadWorldFile( osQubeFile, "psw",
poDS->adfGeoTransform );
if( !poDS->bGotTransform )
poDS->bGotTransform =
GDALReadWorldFile( osQubeFile, "wld",
poDS->adfGeoTransform );
/* -------------------------------------------------------------------- */
/* Open target binary file. */
/* -------------------------------------------------------------------- */
if( poOpenInfo->eAccess == GA_ReadOnly )
poDS->fpImage = VSIFOpenL( osQubeFile, "r" );
else
poDS->fpImage = VSIFOpenL( osQubeFile, "r+" );
if( poDS->fpImage == NULL )
{
CPLError( CE_Failure, CPLE_OpenFailed,
"Failed to open %s with write permission.\n%s",
osQubeFile.c_str(),
VSIStrerror( errno ) );
delete poDS;
return NULL;
}
poDS->eAccess = poOpenInfo->eAccess;
/* -------------------------------------------------------------------- */
/* Compute the line offsets. */
/* -------------------------------------------------------------------- */
const long int nItemSize = GDALGetDataTypeSize(eDataType)/8;
const long int nPixelOffset = nItemSize;
const long int nLineOffset = nPixelOffset * nCols + atoi(poDS->GetKeyword("NBB")) ;
const long int nBandOffset = nLineOffset * nRows;
nSkipBytes = atoi(poDS->GetKeyword("LBLSIZE"));
/* -------------------------------------------------------------------- */
/* Create band information objects. */
/* -------------------------------------------------------------------- */
for( int i = 0; i < nBands; i++ )
{
GDALRasterBand *poBand
= new RawRasterBand( poDS, i+1, poDS->fpImage, nSkipBytes + nBandOffset * i,
nPixelOffset, nLineOffset, eDataType,
#ifdef CPL_LSB
chByteOrder == 'I' || chByteOrder == 'L',
#else
chByteOrder == 'M',
#endif
TRUE );
poDS->SetBand( i+1, poBand );
poBand->SetNoDataValue( dfNoData );
if (bIsDTM) {
poBand->SetScale( (double) CPLAtof(poDS->GetKeyword( "DTM.DTM_SCALING_FACTOR") ) );
poBand->SetOffset( (double) CPLAtof(poDS->GetKeyword( "DTM.DTM_OFFSET") ) );
const char* pszMin = poDS->GetKeyword( "DTM.DTM_MINIMUM_DN", NULL );
const char* pszMax = poDS->GetKeyword( "DTM.DTM_MAXIMUM_DN", NULL );
if (pszMin != NULL && pszMax != NULL )
poBand->SetStatistics(CPLAtofM(pszMin),CPLAtofM(pszMax),0,0);
const char* pszNoData = poDS->GetKeyword( "DTM.DTM_MISSING_DN", NULL );
if (pszNoData != NULL )
poBand->SetNoDataValue( CPLAtofM(pszNoData) );
} else if (EQUAL( poDS->GetKeyword( "BLTYPE"), "M94_HRSC" )) {
float scale=CPLAtof(poDS->GetKeyword("DLRTO8.REFLECTANCE_SCALING_FACTOR","-1."));
if (scale < 0.) {
scale = CPLAtof(poDS->GetKeyword( "HRCAL.REFLECTANCE_SCALING_FACTOR","1."));
}
poBand->SetScale( scale );
float offset=CPLAtof(poDS->GetKeyword("DLRTO8.REFLECTANCE_OFFSET","-1."));
if (offset < 0.) {
offset = CPLAtof(poDS->GetKeyword( "HRCAL.REFLECTANCE_OFFSET","0."));
}
poBand->SetOffset( offset );
}
const char* pszMin = poDS->GetKeyword( "STATISTICS.MINIMUM", NULL );
const char* pszMax = poDS->GetKeyword( "STATISTICS.MAXIMUM", NULL );
const char* pszMean = poDS->GetKeyword( "STATISTICS.MEAN", NULL );
const char* pszStdDev = poDS->GetKeyword( "STATISTICS.STANDARD_DEVIATION", NULL );
if (pszMin != NULL && pszMax != NULL && pszMean != NULL && pszStdDev != NULL )
poBand->SetStatistics(CPLAtofM(pszMin),CPLAtofM(pszMax),CPLAtofM(pszMean),CPLAtofM(pszStdDev));
}
/* -------------------------------------------------------------------- */
/* Instrument-specific keywords as metadata. */
/* -------------------------------------------------------------------- */
/****************** HRSC ******************************/
if (EQUAL( poDS->GetKeyword( "BLTYPE"), "M94_HRSC" ) ) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", poDS->GetKeyword( "M94_INSTRUMENT.INSTRUMENT_HOST_NAME") );
poDS->SetMetadataItem( "PRODUCT_TYPE", poDS->GetKeyword( "TYPE"));
if (EQUAL( poDS->GetKeyword( "M94_INSTRUMENT.DETECTOR_ID"), "MEX_HRSC_SRC" )) {
static const char *apszKeywords[] = {
"M94_ORBIT.IMAGE_TIME",
"FILE.EVENT_TYPE",
"FILE.PROCESSING_LEVEL_ID",
"M94_INSTRUMENT.DETECTOR_ID",
"M94_CAMERAS.EXPOSURE_DURATION",
"HRCONVER.INSTRUMENT_TEMPERATURE", NULL
};
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
} else {
static const char *apszKeywords[] = {
"M94_ORBIT.START_TIME", "M94_ORBIT.STOP_TIME",
"M94_INSTRUMENT.DETECTOR_ID",
"M94_CAMERAS.MACROPIXEL_SIZE",
"FILE.EVENT_TYPE",
"M94_INSTRUMENT.MISSION_PHASE_NAME",
"HRORTHO.SPICE_FILE_NAME",
"HRCONVER.MISSING_FRAMES", "HRCONVER.OVERFLOW_FRAMES", "HRCONVER.ERROR_FRAMES",
"HRFOOT.BEST_GROUND_SAMPLING_DISTANCE",
"DLRTO8.RADIANCE_SCALING_FACTOR", "DLRTO8.RADIANCE_OFFSET",
"DLRTO8.REFLECTANCE_SCALING_FACTOR", "DLRTO8.REFLECTANCE_OFFSET",
"HRCAL.RADIANCE_SCALING_FACTOR", "HRCAL.RADIANCE_OFFSET",
"HRCAL.REFLECTANCE_SCALING_FACTOR", "HRCAL.REFLECTANCE_OFFSET",
"HRORTHO.DTM_NAME", "HRORTHO.EXTORI_FILE_NAME", "HRORTHO.GEOMETRIC_CALIB_FILE_NAME",
NULL
};
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i], NULL );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
}
if (bIsDTM && EQUAL( poDS->GetKeyword( "MAP.TARGET_NAME"), "MARS" )) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", "MARS_EXPRESS" );
poDS->SetMetadataItem( "PRODUCT_TYPE", "DTM");
static const char *apszKeywords[] = {
"DTM.DTM_MISSING_DN", "DTM.DTM_OFFSET", "DTM.DTM_SCALING_FACTOR", "DTM.DTM_A_AXIS_RADIUS",
"DTM.DTM_B_AXIS_RADIUS", "DTM.DTM_C_AXIS_RADIUS", "DTM.DTM_DESC", "DTM.DTM_MINIMUM_DN",
"DTM.DTM_MAXIMUM_DN", NULL };
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
/****************** DAWN ******************************/
else if (EQUAL( poDS->GetKeyword( "INSTRUMENT_ID"), "FC2" )) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", "DAWN" );
static const char *apszKeywords[] = {"ORBIT_NUMBER","FILTER_NUMBER",
"FRONT_DOOR_STATUS",
"FIRST_LINE",
"FIRST_LINE_SAMPLE",
"PRODUCER_INSTITUTION_NAME",
"SOURCE_FILE_NAME",
"PROCESSING_LEVEL_ID",
"TARGET_NAME",
"LIMB_IN_IMAGE",
"POLE_IN_IMAGE",
"REFLECTANCE_SCALING_FACTOR",
"SPICE_FILE_NAME",
"SPACECRAFT_CENTRIC_LATITUDE",
"SPACECRAFT_EASTERN_LONGITUDE",
"FOOTPRINT_POSITIVE_LONGITUDE",
NULL };
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
else if (bIsDTM && EQUAL( poDS->GetKeyword( "TARGET_NAME"), "VESTA" )) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", "DAWN" );
poDS->SetMetadataItem( "PRODUCT_TYPE", "DTM");
static const char *apszKeywords[] = {
"DTM_MISSING_DN", "DTM_OFFSET", "DTM_SCALING_FACTOR", "DTM_A_AXIS_RADIUS",
"DTM_B_AXIS_RADIUS", "DTM_C_AXIS_RADIUS", "DTM_MINIMUM_DN",
"DTM_MAXIMUM_DN", "MAP_PROJECTION_TYPE", "COORDINATE_SYSTEM_NAME",
"POSITIVE_LONGITUDE_DIRECTION", "MAP_SCALE",
"CENTER_LONGITUDE", "LINE_PROJECTION_OFFSET", "SAMPLE_PROJECTION_OFFSET",
NULL };
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
/* -------------------------------------------------------------------- */
/* END Instrument-specific keywords as metadata. */
/* -------------------------------------------------------------------- */
if (EQUAL(poDS->GetKeyword( "EOL"), "1" ))
poDS->SetMetadataItem( "END-OF-DATASET_LABEL", "PRESENT" );
poDS->SetMetadataItem( "CONVERSION_DETAILS", "http://www.lpi.usra.edu/meetings/lpsc2014/pdf/1088.pdf" );
/* -------------------------------------------------------------------- */
/* Initialize any PAM information. */
/* -------------------------------------------------------------------- */
poDS->TryLoadXML();
/* -------------------------------------------------------------------- */
/* Check for overviews. */
/* -------------------------------------------------------------------- */
poDS->oOvManager.Initialize( poDS, poOpenInfo->pszFilename );
return( poDS );
}
rspfString rspfOgcWktTranslator::fromOssimKwl(const rspfKeywordlist &kwl,
const char *prefix)const
{
rspfString projType = kwl.find(rspfKeywordNames::TYPE_KW);
rspfString datumType = kwl.find(rspfKeywordNames::DATUM_KW);
rspfString wktString;
OGRSpatialReference oSRS;
if(projType == "")
{
return wktString;
}
rspfString zone = kwl.find(prefix, rspfKeywordNames::ZONE_KW);
rspfString hemisphere = kwl.find(prefix, rspfKeywordNames::HEMISPHERE_KW);
rspfString parallel1 = kwl.find(prefix, rspfKeywordNames::STD_PARALLEL_1_KW);
rspfString parallel2 = kwl.find(prefix, rspfKeywordNames::STD_PARALLEL_2_KW);
rspfString originLat = kwl.find(prefix, rspfKeywordNames::ORIGIN_LATITUDE_KW);
rspfString centralMeridian = kwl.find(prefix, rspfKeywordNames::CENTRAL_MERIDIAN_KW);
rspfString scale = kwl.find(prefix, rspfKeywordNames::SCALE_FACTOR_KW);
rspfString pcsCode = kwl.find(prefix, rspfKeywordNames::PCS_CODE_KW);
rspfDpt falseEastingNorthing;
falseEastingNorthing.x = 0.0;
falseEastingNorthing.y = 0.0;
const char *lookup =
kwl.find(prefix, rspfKeywordNames::FALSE_EASTING_NORTHING_UNITS_KW);
if (lookup)
{
rspfUnitType units =
static_cast<rspfUnitType>(rspfUnitTypeLut::instance()->
getEntryNumber(lookup));
lookup = kwl.find(prefix, rspfKeywordNames::FALSE_EASTING_NORTHING_KW);
if (lookup)
{
rspfDpt eastingNorthing;
eastingNorthing.toPoint(std::string(lookup));
switch (units)
{
case RSPF_METERS:
{
falseEastingNorthing = eastingNorthing;
break;
}
case RSPF_FEET:
case RSPF_US_SURVEY_FEET:
{
rspfUnitConversionTool ut;
ut.setValue(eastingNorthing.x, units);
falseEastingNorthing.x = ut.getValue(RSPF_METERS);
ut.setValue(eastingNorthing.y, units);
falseEastingNorthing.y = ut.getValue(RSPF_METERS);
break;
}
default:
{
rspfNotify(rspfNotifyLevel_WARN)
<< "rspfOgcWktTranslator::fromOssimKwl WARNING!"
<< "Unhandled unit type for "
<< rspfKeywordNames::FALSE_EASTING_NORTHING_UNITS_KW
<< ": "
<< ( rspfUnitTypeLut::instance()->
getEntryString(units).c_str() )
<< endl;
break;
}
} // End of switch (units)
} // End of if (FALSE_EASTING_NORTHING_KW)
} // End of if (FALSE_EASTING_NORTHING_UNITS_KW)
else
{
lookup = kwl.find(prefix, rspfKeywordNames::FALSE_EASTING_KW);
if(lookup)
{
falseEastingNorthing.x = fabs(rspfString(lookup).toFloat64());
}
lookup = kwl.find(prefix, rspfKeywordNames::FALSE_NORTHING_KW);
if(lookup)
{
falseEastingNorthing.y = fabs(rspfString(lookup).toFloat64());
}
}
oSRS.SetLinearUnits("Meter", 1.0);
int pcsCodeVal = (pcsCode.empty() == false) ? pcsCode.toInt() : EPSG_CODE_MAX;
if(pcsCodeVal < EPSG_CODE_MAX)
{
rspfEpsgProjectionDatabase* proj_db = rspfEpsgProjectionDatabase::instance();
rspfString pcsCodeName = proj_db->findProjectionName(pcsCodeVal);
if ( pcsCodeName.contains("HARN") && pcsCodeName.contains("_Feet") )
{
rspfString feetStr("_Feet");
rspfString newPcsCodeName( pcsCodeName.before(feetStr).c_str() );
rspfString epsg_spec = proj_db->findProjectionCode(newPcsCodeName);
rspf_uint32 new_code = epsg_spec.after(":").toUInt32();
if (new_code)
pcsCodeVal = new_code;
}
oSRS.importFromEPSG( pcsCodeVal );
}
else if(projType == "rspfUtmProjection")
{
#if 0
hemisphere = hemisphere.trim().upcase();
if(hemisphere != "")
{
oSRS.SetUTM(zone.toLong(), hemisphere != "S");
}
else
{
oSRS.SetUTM(zone.toLong(), true);
}
#else
short gcs = USER_DEFINED;
if (datumType == "WGE") gcs = GCS_WGS_84;
else if (datumType == "WGD") gcs = GCS_WGS_72;
else if (datumType == "NAR-C") gcs = GCS_NAD83;
else if (datumType == "NAR") gcs = GCS_NAD83;
else if (datumType == "NAS-C") gcs = GCS_NAD27;
else if (datumType == "NAS") gcs = GCS_NAD27;
else if (datumType == "ADI-M") gcs = GCS_Adindan;
else if (datumType == "ARF-M") gcs = GCS_Arc_1950;
else if (datumType == "ARS-M") gcs = GCS_Arc_1960;
else if (datumType == "EUR-7" || datumType == "EUR-M") gcs = GCS_ED50;
else if ((datumType == "OGB-7") ||
(datumType == "OGB-M") ||
(datumType == "OGB-A") ||
(datumType == "OGB-B") ||
(datumType == "OGB-C") ||
(datumType == "OGB-D")) gcs = GCS_OSGB_1936;
else if (datumType == "TOY-M") gcs = GCS_Tokyo;
else
{
if(traceDebug())
{
rspfNotify(rspfNotifyLevel_DEBUG)
<< "DATUM = " << datumType << " tag not written " << std::endl
<< "Please let us know so we can add it" << std::endl;
}
}
int mapZone = zone.toInt();
hemisphere = hemisphere.trim().upcase();
bool bDoImportFromEPSG = false;
switch ( gcs )
{
case GCS_WGS_84:
{
if (hemisphere == "N") // Northern hemisphere.
{
pcsCodeVal = 32600 + mapZone;
}
else // Southern hemisphere.
{
pcsCodeVal = 32700 + mapZone;
}
bDoImportFromEPSG = true;
break;
}
case GCS_WGS_72:
{
if (hemisphere == "N") // Northern hemisphere.
{
pcsCodeVal = 32200 + mapZone;
}
else // Southern hemisphere.
{
pcsCodeVal = 32300 + mapZone;
}
bDoImportFromEPSG = true;
break;
}
case GCS_NAD27:
{
if (hemisphere == "N") // Northern hemisphere.
{
pcsCodeVal = 26700 + mapZone;
}
else // Southern hemisphere.
{
pcsCodeVal = 32000 + mapZone;
}
bDoImportFromEPSG = true;
break;
}
case GCS_NAD83:
{
if (hemisphere == "N") // Northern hemisphere.
{
pcsCodeVal = 26900 + mapZone;
}
else // Southern hemisphere.
{
pcsCodeVal = 32100 + mapZone;
}
bDoImportFromEPSG = true;
break;
}
default:
{
if (mapZone > 0) // Northern hemisphere.
{
pcsCodeVal = 16000 + mapZone;
}
else if (mapZone < 0) // Southern hemisphere.
{
hemisphere = "S";
pcsCodeVal = 16100 + abs(mapZone);
}
break;
}
} // End of "switch ( gcs )"
if ( bDoImportFromEPSG == true )
oSRS.importFromEPSG( pcsCodeVal );
else
{
if(hemisphere != "")
{
oSRS.SetUTM(zone.toLong(), hemisphere != "S");
}
else
{
oSRS.SetUTM(zone.toLong(), true);
}
}
#endif
}
else if(projType == "rspfLlxyProjection")
{
OGRSpatialReference oGeogCS;
oGeogCS.SetEquirectangular(0.0,
0.0,
0.0,
0.0);
oGeogCS.SetAngularUnits(SRS_UA_DEGREE, atof(SRS_UA_DEGREE_CONV));
oSRS.CopyGeogCSFrom( &oGeogCS );
}
else if(projType == "rspfEquDistCylProjection")
{
OGRSpatialReference oGeogCS;
oGeogCS.SetEquirectangular(originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
oGeogCS.SetAngularUnits(SRS_UA_DEGREE, atof(SRS_UA_DEGREE_CONV));
oSRS.CopyGeogCSFrom( &oGeogCS );
}
else if(projType == "rspfSinusoidalProjection")
{
oSRS.SetSinusoidal(centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfCylEquAreaProjection")
{
oSRS.SetCEA(originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfCassiniProjection")
{
oSRS.SetCS(originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfAlbersProjection")
{
oSRS.SetACEA(parallel1.toDouble(),
parallel2.toDouble(),
originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfAzimEquDistProjection")
{
oSRS.SetAE(originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfEckert4Projection")
{
oSRS.SetEckertIV(centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfEckert6Projection")
{
oSRS.SetEckertVI(centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfGnomonicProjection")
{
oSRS.SetGnomonic(originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfLambertConformalConicProjection")
{
oSRS.SetLCC(parallel1.toDouble(),
parallel2.toDouble(),
originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfVanDerGrintenProjection")
{
oSRS.SetVDG(centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfMillerProjection")
{
oSRS.SetMC(originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfMercatorProjection")
{
oSRS.SetMercator(originLat.toDouble(),
centralMeridian.toDouble(),
scale.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfMollweidProjection")
{
oSRS.SetMollweide(centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfNewZealandMapGridProjection")
{
oSRS.SetNZMG(originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfOrthoGraphicProjection")
{
oSRS.SetOrthographic(originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfPolarStereoProjection")
{
oSRS.SetPS(originLat.toDouble(),
centralMeridian.toDouble(),
scale.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfPolyconicProjectio")
{
oSRS.SetPolyconic(originLat.toDouble(),
centralMeridian.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfStereographicProjection")
{
oSRS.SetStereographic(originLat.toDouble(),
centralMeridian.toDouble(),
scale.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else if(projType == "rspfTransMercatorProjection")
{
oSRS.SetTM(originLat.toDouble(),
centralMeridian.toDouble(),
scale.toDouble(),
falseEastingNorthing.x,
falseEastingNorthing.y);
}
else
{
cerr << "rspfOgcWktTranslator::fromOssimKwl:\n"
<< "Projection translation for "
<< projType
<< " not supported "
<< endl;
}
if(pcsCodeVal >= EPSG_CODE_MAX)
{
datumType = datumType.upcase();
if(datumType == "WGE")
{
oSRS.SetWellKnownGeogCS("WGS84");
}
else if(datumType == "WGD")
{
oSRS.SetWellKnownGeogCS("WGS72");
}
else if(datumType == "NAS-C") //1927
{
oSRS.SetWellKnownGeogCS("NAD27");
}
else if(datumType == "NAS") //1927
{
oSRS.SetWellKnownGeogCS("NAD27");
}
else if(datumType == "NAR-C") // 1983
{
oSRS.SetWellKnownGeogCS("NAD83");
}
else if(datumType == "NAR") // 1983
{
oSRS.SetWellKnownGeogCS("NAD83");
}
else if(datumType == "NTF")
{
oSRS.SetWellKnownGeogCS("EPSG:4275");
}
else
{
cerr << "rspfOgcWktTranslator::fromOssimKwl: Datum translation for "
<< datumType
<<" not supported"
<< endl;
}
}
char* exportString = NULL;
oSRS.exportToWkt(&exportString);
if(exportString)
{
wktString = exportString;
OGRFree(exportString);
}
return wktString;
}