std::string AlbersConEqArea::wkt()
{
OGRSpatialReference sr;
int epsg = DATUM2EPSG[datum()];
char **wkt = 0;
std::string output = "";
OGRErr err;
sr.SetProjCS("Albers Conic Equal Area");
if (epsg != -1) {
sr.importFromEPSG(epsg);
sr.SetACEA(param(2), param(3), param(5), param(4), param(6), param(7));
err = sr.exportToPrettyWkt(wkt);
} else {
return output;
}
if (err == OGRERR_NONE) {
output = *wkt;
OGRFree(wkt);
}
return output;
}
GDALDataset *MSGNDataset::Open( GDALOpenInfo * poOpenInfo )
{
open_mode_type open_mode = MODE_VISIR;
GDALOpenInfo* open_info = poOpenInfo;
if (!poOpenInfo->bStatOK) {
if ( EQUALN(poOpenInfo->pszFilename, "HRV:", 4) ) {
open_info = new GDALOpenInfo(&poOpenInfo->pszFilename[4], poOpenInfo->eAccess);
open_mode = MODE_HRV;
} else
if ( EQUALN(poOpenInfo->pszFilename, "RAD:", 4 ) ) {
open_info = new GDALOpenInfo(&poOpenInfo->pszFilename[4], poOpenInfo->eAccess);
open_mode = MODE_RAD;
}
}
/* -------------------------------------------------------------------- */
/* Before trying MSGNOpen() we first verify that there is at */
/* least one "\n#keyword" type signature in the first chunk of */
/* the file. */
/* -------------------------------------------------------------------- */
if( open_info->fp == NULL || open_info->nHeaderBytes < 50 )
return NULL;
/* check if this is a "NATIVE" MSG format image */
if( !EQUALN((char *)open_info->pabyHeader,
"FormatName : NATIVE", 36) )
{
return NULL;
}
/* -------------------------------------------------------------------- */
/* Confirm the requested access is supported. */
/* -------------------------------------------------------------------- */
if( poOpenInfo->eAccess == GA_Update )
{
CPLError( CE_Failure, CPLE_NotSupported,
"The MSGN driver does not support update access to existing"
" datasets.\n" );
return NULL;
}
/* -------------------------------------------------------------------- */
/* Create a corresponding GDALDataset. */
/* -------------------------------------------------------------------- */
MSGNDataset *poDS;
poDS = new MSGNDataset();
poDS->fp = open_info->fp;
open_info->fp = NULL;
/* -------------------------------------------------------------------- */
/* Read the header. */
/* -------------------------------------------------------------------- */
// first reset the file pointer, then hand over to the msg_reader_core
VSIFSeek( poDS->fp, 0, SEEK_SET );
poDS->msg_reader_core = new Msg_reader_core(poDS->fp);
if (!poDS->msg_reader_core->get_open_success()) {
delete poDS;
return NULL;
}
poDS->nRasterXSize = poDS->msg_reader_core->get_columns();
poDS->nRasterYSize = poDS->msg_reader_core->get_lines();
if (open_mode == MODE_HRV) {
poDS->nRasterXSize *= 3;
poDS->nRasterYSize *= 3;
}
/* -------------------------------------------------------------------- */
/* Create band information objects. */
/* -------------------------------------------------------------------- */
unsigned int i;
unsigned int band_count = 1;
unsigned int missing_band_count = 0;
unsigned char* bands = poDS->msg_reader_core->get_band_map();
unsigned char band_map[MSG_NUM_CHANNELS+1]; // map GDAL band numbers to MSG channels
for (i=0; i < MSG_NUM_CHANNELS; i++) {
if (bands[i]) {
bool ok_to_add = false;
switch (open_mode) {
case MODE_VISIR:
ok_to_add = i < MSG_NUM_CHANNELS - 1;
break;
case MODE_RAD:
ok_to_add = (i <= 2) || (Msg_reader_core::Blackbody_LUT[i+1].B != 0);
break;
case MODE_HRV:
ok_to_add = i == MSG_NUM_CHANNELS - 1;
break;
}
if (ok_to_add) {
poDS->SetBand( band_count, new MSGNRasterBand( poDS, band_count, open_mode, i+1, i+1 - missing_band_count));
band_map[band_count] = i+1;
band_count++;
}
} else {
missing_band_count++;
}
}
double pixel_gsd_x;
double pixel_gsd_y;
double origin_x;
double origin_y;
if (open_mode != MODE_HRV) {
pixel_gsd_x = 1000 * poDS->msg_reader_core->get_col_dir_step(); // convert from km to m
pixel_gsd_y = 1000 * poDS->msg_reader_core->get_line_dir_step(); // convert from km to m
origin_x = -pixel_gsd_x * (-(Conversions::nlines / 2.0) + poDS->msg_reader_core->get_col_start());
origin_y = -pixel_gsd_y * ((Conversions::nlines / 2.0) - poDS->msg_reader_core->get_line_start());
} else {
pixel_gsd_x = 1000 * poDS->msg_reader_core->get_col_dir_step() / 3.0; // convert from km to m, approximate for HRV
pixel_gsd_y = 1000 * poDS->msg_reader_core->get_line_dir_step() / 3.0; // convert from km to m, approximate for HRV
origin_x = -pixel_gsd_x * (-(3*Conversions::nlines / 2.0) + 3*poDS->msg_reader_core->get_col_start());
origin_y = -pixel_gsd_y * ((3*Conversions::nlines / 2.0) - 3*poDS->msg_reader_core->get_line_start());
}
poDS->adfGeoTransform[0] = origin_x;
poDS->adfGeoTransform[1] = pixel_gsd_x;
poDS->adfGeoTransform[2] = 0.0;
poDS->adfGeoTransform[3] = origin_y;
poDS->adfGeoTransform[4] = 0.0;
poDS->adfGeoTransform[5] = -pixel_gsd_y;
OGRSpatialReference oSRS;
oSRS.SetProjCS("Geostationary projection (MSG)");
oSRS.SetGEOS( 0, 35785831, 0, 0 );
oSRS.SetGeogCS(
"MSG Ellipsoid",
"MSG_DATUM",
"MSG_SPHEROID",
Conversions::rpol * 1000.0,
1 / ( 1 - Conversions::rpol/Conversions::req)
);
oSRS.exportToWkt( &(poDS->pszProjection) );
CALIBRATION* cal = poDS->msg_reader_core->get_calibration_parameters();
char tagname[30];
char field[300];
poDS->SetMetadataItem("Radiometric parameters format", "offset slope");
for (i=1; i < band_count; i++) {
sprintf(tagname, "ch%02d_cal", band_map[i]);
sprintf(field, "%.12e %.12e", cal[band_map[i]-1].cal_offset, cal[band_map[i]-1].cal_slope);
poDS->SetMetadataItem(tagname, field);
}
sprintf(field, "%04d%02d%02d/%02d:%02d",
poDS->msg_reader_core->get_year(),
poDS->msg_reader_core->get_month(),
poDS->msg_reader_core->get_day(),
poDS->msg_reader_core->get_hour(),
poDS->msg_reader_core->get_minute()
);
poDS->SetMetadataItem("Date/Time", field);
sprintf(field, "%d %d",
poDS->msg_reader_core->get_line_start(),
poDS->msg_reader_core->get_col_start()
);
poDS->SetMetadataItem("Origin", field);
if (open_info != poOpenInfo) {
delete open_info;
}
return( poDS );
}
void PDSDataset::ParseSRS()
{
const char *pszFilename = GetDescription();
/* ==================================================================== */
/* Get the geotransform. */
/* ==================================================================== */
/*********** Grab Cellsize ************/
//example:
//MAP_SCALE = 14.818 <KM/PIXEL>
//added search for unit (only checks for CM, KM - defaults to Meters)
const char *value;
//Georef parameters
double dfULXMap=0.5;
double dfULYMap = 0.5;
double dfXDim = 1.0;
double dfYDim = 1.0;
double xulcenter = 0.0;
double yulcenter = 0.0;
value = GetKeyword("IMAGE_MAP_PROJECTION.MAP_SCALE");
if (strlen(value) > 0 ) {
dfXDim = atof(value);
dfYDim = atof(value) * -1;
CPLString unit = GetKeywordUnit("IMAGE_MAP_PROJECTION.MAP_SCALE",2); //KM
//value = GetKeywordUnit("IMAGE_MAP_PROJECTION.MAP_SCALE",3); //PIXEL
if((EQUAL(unit,"M")) || (EQUAL(unit,"METER")) || (EQUAL(unit,"METERS"))) {
// do nothing
}
else if (EQUAL(unit,"CM")) {
// convert from cm to m
dfXDim = dfXDim / 100.0;
dfYDim = dfYDim / 100.0;
} else {
//defaults to convert km to m
dfXDim = dfXDim * 1000.0;
dfYDim = dfYDim * 1000.0;
}
}
/* -------------------------------------------------------------------- */
/* Calculate upper left corner of pixel in meters from the */
/* upper left center pixel sample/line offsets. It doesn't */
/* mean the defaults will work for every PDS image, as these */
/* values are used inconsistantly. Thus we have included */
/* conversion options to allow the user to override the */
/* documented PDS3 default. Jan. 2011, for known mapping issues */
/* see GDAL PDS page or mapping within ISIS3 source (USGS) */
/* $ISIS3DATA/base/translations/pdsProjectionLineSampToXY.def */
/* -------------------------------------------------------------------- */
// defaults should be correct for what is documented in the PDS3 standard
double dfSampleOffset_Shift;
double dfLineOffset_Shift;
double dfSampleOffset_Mult;
double dfLineOffset_Mult;
dfSampleOffset_Shift =
atof(CPLGetConfigOption( "PDS_SampleProjOffset_Shift", "-0.5" ));
dfLineOffset_Shift =
atof(CPLGetConfigOption( "PDS_LineProjOffset_Shift", "-0.5" ));
dfSampleOffset_Mult =
atof(CPLGetConfigOption( "PDS_SampleProjOffset_Mult", "-1.0") );
dfLineOffset_Mult =
atof( CPLGetConfigOption( "PDS_LineProjOffset_Mult", "1.0") );
/*********** Grab LINE_PROJECTION_OFFSET ************/
value = GetKeyword("IMAGE_MAP_PROJECTION.LINE_PROJECTION_OFFSET");
if (strlen(value) > 0) {
yulcenter = atof(value);
dfULYMap = ((yulcenter + dfLineOffset_Shift) * -dfYDim * dfLineOffset_Mult);
//notice dfYDim is negative here which is why it is again negated here
}
/*********** Grab SAMPLE_PROJECTION_OFFSET ************/
value = GetKeyword("IMAGE_MAP_PROJECTION.SAMPLE_PROJECTION_OFFSET");
if( strlen(value) > 0 ) {
xulcenter = atof(value);
dfULXMap = ((xulcenter + dfSampleOffset_Shift) * dfXDim * dfSampleOffset_Mult);
}
/* ==================================================================== */
/* Get the coordinate system. */
/* ==================================================================== */
int bProjectionSet = TRUE;
double semi_major = 0.0;
double semi_minor = 0.0;
double iflattening = 0.0;
double center_lat = 0.0;
double center_lon = 0.0;
double first_std_parallel = 0.0;
double second_std_parallel = 0.0;
OGRSpatialReference oSRS;
/*********** Grab TARGET_NAME ************/
/**** This is the planets name i.e. MARS ***/
CPLString target_name = GetKeyword("TARGET_NAME");
CleanString( target_name );
/********** Grab MAP_PROJECTION_TYPE *****/
CPLString map_proj_name =
GetKeyword( "IMAGE_MAP_PROJECTION.MAP_PROJECTION_TYPE");
CleanString( map_proj_name );
/****** Grab semi_major & convert to KM ******/
semi_major =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.A_AXIS_RADIUS")) * 1000.0;
/****** Grab semi-minor & convert to KM ******/
semi_minor =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.C_AXIS_RADIUS")) * 1000.0;
/*********** Grab CENTER_LAT ************/
center_lat =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.CENTER_LATITUDE"));
/*********** Grab CENTER_LON ************/
center_lon =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.CENTER_LONGITUDE"));
/********** Grab 1st std parallel *******/
first_std_parallel =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.FIRST_STANDARD_PARALLEL"));
/********** Grab 2nd std parallel *******/
second_std_parallel =
atof(GetKeyword( "IMAGE_MAP_PROJECTION.SECOND_STANDARD_PARALLEL"));
/*** grab PROJECTION_LATITUDE_TYPE = "PLANETOCENTRIC" ****/
// Need to further study how ocentric/ographic will effect the gdal library.
// So far we will use this fact to define a sphere or ellipse for some projections
// Frank - may need to talk this over
char bIsGeographic = TRUE;
value = GetKeyword("IMAGE_MAP_PROJECTION.COORDINATE_SYSTEM_NAME");
if (EQUAL( value, "PLANETOCENTRIC" ))
bIsGeographic = FALSE;
/** Set oSRS projection and parameters --- all PDS supported types added if apparently supported in oSRS
"AITOFF", ** Not supported in GDAL??
"ALBERS",
"BONNE",
"BRIESEMEISTER", ** Not supported in GDAL??
"CYLINDRICAL EQUAL AREA",
"EQUIDISTANT",
"EQUIRECTANGULAR",
"GNOMONIC",
"HAMMER", ** Not supported in GDAL??
"HENDU", ** Not supported in GDAL??
"LAMBERT AZIMUTHAL EQUAL AREA",
"LAMBERT CONFORMAL",
"MERCATOR",
"MOLLWEIDE",
"OBLIQUE CYLINDRICAL",
"ORTHOGRAPHIC",
"SIMPLE CYLINDRICAL",
"SINUSOIDAL",
"STEREOGRAPHIC",
"TRANSVERSE MERCATOR",
"VAN DER GRINTEN", ** Not supported in GDAL??
"WERNER" ** Not supported in GDAL??
**/
CPLDebug( "PDS","using projection %s\n\n", map_proj_name.c_str());
if ((EQUAL( map_proj_name, "EQUIRECTANGULAR" )) ||
(EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ) {
oSRS.SetEquirectangular2 ( 0.0, center_lon, center_lat, 0, 0 );
} else if (EQUAL( map_proj_name, "ORTHOGRAPHIC" )) {
oSRS.SetOrthographic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "SINUSOIDAL" )) {
oSRS.SetSinusoidal ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MERCATOR" )) {
oSRS.SetMercator ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "STEREOGRAPHIC" )) {
oSRS.SetStereographic ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC")) {
oSRS.SetPS ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "TRANSVERSE_MERCATOR" )) {
oSRS.SetTM ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_CONFORMAL_CONIC" )) {
oSRS.SetLCC ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_AZIMUTHAL_EQUAL_AREA" )) {
oSRS.SetLAEA( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "CYLINDRICAL_EQUAL_AREA" )) {
oSRS.SetCEA ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MOLLWEIDE" )) {
oSRS.SetMollweide ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "ALBERS" )) {
oSRS.SetACEA ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "BONNE" )) {
oSRS.SetBonne ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "GNOMONIC" )) {
oSRS.SetGnomonic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "OBLIQUE_CYLINDRICAL" )) {
// hope Swiss Oblique Cylindrical is the same
oSRS.SetSOC ( center_lat, center_lon, 0, 0 );
} else {
CPLDebug( "PDS",
"Dataset projection %s is not supported. Continuing...",
map_proj_name.c_str() );
bProjectionSet = FALSE;
}
if (bProjectionSet) {
//Create projection name, i.e. MERCATOR MARS and set as ProjCS keyword
CPLString proj_target_name = map_proj_name + " " + target_name;
oSRS.SetProjCS(proj_target_name); //set ProjCS keyword
//The geographic/geocentric name will be the same basic name as the body name
//'GCS' = Geographic/Geocentric Coordinate System
CPLString geog_name = "GCS_" + target_name;
//The datum and sphere names will be the same basic name aas the planet
CPLString datum_name = "D_" + target_name;
CPLString sphere_name = target_name; // + "_IAU_IAG"); //Might not be IAU defined so don't add
//calculate inverse flattening from major and minor axis: 1/f = a/(a-b)
if ((semi_major - semi_minor) < 0.0000001)
iflattening = 0;
else
iflattening = semi_major / (semi_major - semi_minor);
//Set the body size but take into consideration which proj is being used to help w/ compatibility
//Notice that most PDS projections are spherical based on the fact that ISIS/PICS are spherical
//Set the body size but take into consideration which proj is being used to help w/ proj4 compatibility
//The use of a Sphere, polar radius or ellipse here is based on how ISIS does it internally
if ( ( (EQUAL( map_proj_name, "STEREOGRAPHIC" ) && (fabs(center_lat) == 90)) ) ||
(EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC" )))
{
if (bIsGeographic) {
//Geograpraphic, so set an ellipse
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere using the semi-minor axis. I hope...
sphere_name += "_polarRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_minor, 0.0,
"Reference_Meridian", 0.0 );
}
}
else if ( (EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ||
(EQUAL( map_proj_name, "ORTHOGRAPHIC" )) ||
(EQUAL( map_proj_name, "STEREOGRAPHIC" )) ||
(EQUAL( map_proj_name, "SINUSOIDAL" )) ) {
//isis uses the spherical equation for these projections so force a sphere
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else if (EQUAL( map_proj_name, "EQUIRECTANGULAR" )) {
//isis uses local radius as a sphere, which is pre-calculated in the PDS label as the semi-major
sphere_name += "_localRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else {
//All other projections: Mercator, Transverse Mercator, Lambert Conformal, etc.
//Geographic, so set an ellipse
if (bIsGeographic) {
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere. I hope...
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
}
// translate back into a projection string.
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
osProjection = pszResult;
CPLFree( pszResult );
}
/* ==================================================================== */
/* Check for a .prj and world file to override the georeferencing. */
/* ==================================================================== */
{
CPLString osPath, osName;
VSILFILE *fp;
osPath = CPLGetPath( pszFilename );
osName = CPLGetBasename(pszFilename);
const char *pszPrjFile = CPLFormCIFilename( osPath, osName, "prj" );
fp = VSIFOpenL( pszPrjFile, "r" );
if( fp != NULL )
{
char **papszLines;
OGRSpatialReference oSRS;
VSIFCloseL( fp );
papszLines = CSLLoad( pszPrjFile );
if( oSRS.importFromESRI( papszLines ) == OGRERR_NONE )
{
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
osProjection = pszResult;
CPLFree( pszResult );
}
CSLDestroy( papszLines );
}
}
if( dfULYMap != 0.5 || dfULYMap != 0.5 || dfXDim != 1.0 || dfYDim != 1.0 )
{
bGotTransform = TRUE;
adfGeoTransform[0] = dfULXMap;
adfGeoTransform[1] = dfXDim;
adfGeoTransform[2] = 0.0;
adfGeoTransform[3] = dfULYMap;
adfGeoTransform[4] = 0.0;
adfGeoTransform[5] = dfYDim;
}
if( !bGotTransform )
bGotTransform =
GDALReadWorldFile( pszFilename, "psw",
adfGeoTransform );
if( !bGotTransform )
bGotTransform =
GDALReadWorldFile( pszFilename, "wld",
adfGeoTransform );
}
GDALDataset *ISIS2Dataset::Open( GDALOpenInfo * poOpenInfo )
{
/* -------------------------------------------------------------------- */
/* Does this look like a CUBE or an IMAGE Primary Data Object? */
/* -------------------------------------------------------------------- */
if( !Identify( poOpenInfo ) )
return NULL;
/* -------------------------------------------------------------------- */
/* Open the file using the large file API. */
/* -------------------------------------------------------------------- */
VSILFILE *fpQube = VSIFOpenL( poOpenInfo->pszFilename, "rb" );
if( fpQube == NULL )
return NULL;
ISIS2Dataset *poDS;
poDS = new ISIS2Dataset();
if( ! poDS->oKeywords.Ingest( fpQube, 0 ) )
{
VSIFCloseL( fpQube );
delete poDS;
return NULL;
}
VSIFCloseL( fpQube );
/* -------------------------------------------------------------------- */
/* We assume the user is pointing to the label (ie. .lab) file. */
/* -------------------------------------------------------------------- */
// QUBE can be inline or detached and point to an image name
// ^QUBE = 76
// ^QUBE = ("ui31s015.img",6441<BYTES>) - has another label on the image
// ^QUBE = "ui31s015.img" - which implies no label or skip value
const char *pszQube = poDS->GetKeyword( "^QUBE" );
GUIntBig nQube = 0;
int bByteLocation = FALSE;
CPLString osTargetFile = poOpenInfo->pszFilename;
if( pszQube[0] == '"' )
{
CPLString osTPath = CPLGetPath(poOpenInfo->pszFilename);
CPLString osFilename = pszQube;
poDS->CleanString( osFilename );
osTargetFile = CPLFormCIFilename( osTPath, osFilename, NULL );
poDS->osExternalCube = osTargetFile;
}
else if( pszQube[0] == '(' )
{
CPLString osTPath = CPLGetPath(poOpenInfo->pszFilename);
CPLString osFilename = poDS->GetKeywordSub("^QUBE",1,"");
poDS->CleanString( osFilename );
osTargetFile = CPLFormCIFilename( osTPath, osFilename, NULL );
poDS->osExternalCube = osTargetFile;
nQube = atoi(poDS->GetKeywordSub("^QUBE",2,"1"));
if( strstr(poDS->GetKeywordSub("^QUBE",2,"1"),"<BYTES>") != NULL )
bByteLocation = true;
}
else
{
nQube = atoi(pszQube);
if( strstr(pszQube,"<BYTES>") != NULL )
bByteLocation = true;
}
/* -------------------------------------------------------------------- */
/* Check if file an ISIS2 header file? Read a few lines of text */
/* searching for something starting with nrows or ncols. */
/* -------------------------------------------------------------------- */
GDALDataType eDataType = GDT_Byte;
OGRSpatialReference oSRS;
//image parameters
int nRows, nCols, nBands = 1;
GUIntBig nSkipBytes = 0;
int itype;
int s_ix, s_iy, s_iz; // check SUFFIX_ITEMS params.
int record_bytes;
int bNoDataSet = FALSE;
char chByteOrder = 'M'; //default to MSB
//Georef parameters
double dfULXMap=0.5;
double dfULYMap = 0.5;
double dfXDim = 1.0;
double dfYDim = 1.0;
double dfNoData = 0.0;
double xulcenter = 0.0;
double yulcenter = 0.0;
//projection parameters
int bProjectionSet = TRUE;
double semi_major = 0.0;
double semi_minor = 0.0;
double iflattening = 0.0;
double center_lat = 0.0;
double center_lon = 0.0;
double first_std_parallel = 0.0;
double second_std_parallel = 0.0;
VSILFILE *fp;
/* -------------------------------------------------------------------- */
/* Checks to see if this is valid ISIS2 cube */
/* SUFFIX_ITEM tag in .cub file should be (0,0,0); no side-planes */
/* -------------------------------------------------------------------- */
s_ix = atoi(poDS->GetKeywordSub( "QUBE.SUFFIX_ITEMS", 1 ));
s_iy = atoi(poDS->GetKeywordSub( "QUBE.SUFFIX_ITEMS", 2 ));
s_iz = atoi(poDS->GetKeywordSub( "QUBE.SUFFIX_ITEMS", 3 ));
if( s_ix != 0 || s_iy != 0 || s_iz != 0 )
{
CPLError( CE_Failure, CPLE_OpenFailed,
"*** ISIS 2 cube file has invalid SUFFIX_ITEMS parameters:\n"
"*** gdal isis2 driver requires (0, 0, 0), thus no sideplanes or backplanes\n"
"found: (%i, %i, %i)\n\n", s_ix, s_iy, s_iz );
delete poDS;
return NULL;
}
/**************** end SUFFIX_ITEM check ***********************/
/*********** Grab layout type (BSQ, BIP, BIL) ************/
// AXIS_NAME = (SAMPLE,LINE,BAND)
/***********************************************************/
const char *value;
char szLayout[10] = "BSQ"; //default to band seq.
value = poDS->GetKeyword( "QUBE.AXIS_NAME", "" );
if (EQUAL(value,"(SAMPLE,LINE,BAND)") )
strcpy(szLayout,"BSQ");
else if (EQUAL(value,"(BAND,LINE,SAMPLE)") )
strcpy(szLayout,"BIP");
else if (EQUAL(value,"(SAMPLE,BAND,LINE)") || EQUAL(value,"") )
strcpy(szLayout,"BSQ");
else {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return NULL;
}
/*********** Grab samples lines band ************/
nCols = atoi(poDS->GetKeywordSub("QUBE.CORE_ITEMS",1));
nRows = atoi(poDS->GetKeywordSub("QUBE.CORE_ITEMS",2));
nBands = atoi(poDS->GetKeywordSub("QUBE.CORE_ITEMS",3));
/*********** Grab Qube record bytes **********/
record_bytes = atoi(poDS->GetKeyword("RECORD_BYTES"));
if (nQube > 0 && bByteLocation )
nSkipBytes = (nQube - 1);
else if( nQube > 0 )
nSkipBytes = (nQube - 1) * record_bytes;
else
nSkipBytes = 0;
/*********** Grab samples lines band ************/
CPLString osCoreItemType = poDS->GetKeyword( "QUBE.CORE_ITEM_TYPE" );
if( (EQUAL(osCoreItemType,"PC_INTEGER")) ||
(EQUAL(osCoreItemType,"PC_UNSIGNED_INTEGER")) ||
(EQUAL(osCoreItemType,"PC_REAL")) ) {
chByteOrder = 'I';
}
/******** Grab format type - isis2 only supports 8,16,32 *******/
itype = atoi(poDS->GetKeyword("QUBE.CORE_ITEM_BYTES",""));
switch(itype) {
case 1 :
eDataType = GDT_Byte;
dfNoData = NULL1;
bNoDataSet = TRUE;
break;
case 2 :
if( strstr(osCoreItemType,"UNSIGNED") != NULL )
{
dfNoData = 0;
eDataType = GDT_UInt16;
}
else
{
dfNoData = NULL2;
eDataType = GDT_Int16;
}
bNoDataSet = TRUE;
break;
case 4 :
eDataType = GDT_Float32;
dfNoData = NULL3;
bNoDataSet = TRUE;
break;
case 8 :
eDataType = GDT_Float64;
dfNoData = NULL3;
bNoDataSet = TRUE;
break;
default :
CPLError( CE_Failure, CPLE_AppDefined,
"Itype of %d is not supported in ISIS 2.",
itype);
delete poDS;
return NULL;
}
/*********** Grab Cellsize ************/
value = poDS->GetKeyword("QUBE.IMAGE_MAP_PROJECTION.MAP_SCALE");
if (strlen(value) > 0 ) {
dfXDim = (float) atof(value) * 1000.0; /* convert from km to m */
dfYDim = (float) atof(value) * 1000.0 * -1;
}
/*********** Grab LINE_PROJECTION_OFFSET ************/
value = poDS->GetKeyword("QUBE.IMAGE_MAP_PROJECTION.LINE_PROJECTION_OFFSET");
if (strlen(value) > 0) {
yulcenter = (float) atof(value);
yulcenter = ((yulcenter) * dfYDim);
dfULYMap = yulcenter - (dfYDim/2);
}
/*********** Grab SAMPLE_PROJECTION_OFFSET ************/
value = poDS->GetKeyword("QUBE.IMAGE_MAP_PROJECTION.SAMPLE_PROJECTION_OFFSET");
if( strlen(value) > 0 ) {
xulcenter = (float) atof(value);
xulcenter = ((xulcenter) * dfXDim);
dfULXMap = xulcenter - (dfXDim/2);
}
/*********** Grab TARGET_NAME ************/
/**** This is the planets name i.e. MARS ***/
CPLString target_name = poDS->GetKeyword("QUBE.TARGET_NAME");
/*********** Grab MAP_PROJECTION_TYPE ************/
CPLString map_proj_name =
poDS->GetKeyword( "QUBE.IMAGE_MAP_PROJECTION.MAP_PROJECTION_TYPE");
poDS->CleanString( map_proj_name );
/*********** Grab SEMI-MAJOR ************/
semi_major =
atof(poDS->GetKeyword( "QUBE.IMAGE_MAP_PROJECTION.A_AXIS_RADIUS")) * 1000.0;
/*********** Grab semi-minor ************/
semi_minor =
atof(poDS->GetKeyword( "QUBE.IMAGE_MAP_PROJECTION.C_AXIS_RADIUS")) * 1000.0;
/*********** Grab CENTER_LAT ************/
center_lat =
atof(poDS->GetKeyword( "QUBE.IMAGE_MAP_PROJECTION.CENTER_LATITUDE"));
/*********** Grab CENTER_LON ************/
center_lon =
atof(poDS->GetKeyword( "QUBE.IMAGE_MAP_PROJECTION.CENTER_LONGITUDE"));
/*********** Grab 1st std parallel ************/
first_std_parallel =
atof(poDS->GetKeyword( "QUBE.IMAGE_MAP_PROJECTION.FIRST_STANDARD_PARALLEL"));
/*********** Grab 2nd std parallel ************/
second_std_parallel =
atof(poDS->GetKeyword( "QUBE.IMAGE_MAP_PROJECTION.SECOND_STANDARD_PARALLEL"));
/*** grab PROJECTION_LATITUDE_TYPE = "PLANETOCENTRIC" ****/
// Need to further study how ocentric/ographic will effect the gdal library.
// So far we will use this fact to define a sphere or ellipse for some projections
// Frank - may need to talk this over
char bIsGeographic = TRUE;
value = poDS->GetKeyword("CUBE.IMAGE_MAP_PROJECTION.PROJECTION_LATITUDE_TYPE");
if (EQUAL( value, "\"PLANETOCENTRIC\"" ))
bIsGeographic = FALSE;
CPLDebug("ISIS2","using projection %s", map_proj_name.c_str() );
//Set oSRS projection and parameters
if ((EQUAL( map_proj_name, "EQUIRECTANGULAR_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIRECTANGULAR" )) ||
(EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ) {
oSRS.OGRSpatialReference::SetEquirectangular2 ( 0.0, center_lon, center_lat, 0, 0 );
} else if (EQUAL( map_proj_name, "ORTHOGRAPHIC" )) {
oSRS.OGRSpatialReference::SetOrthographic ( center_lat, center_lon, 0, 0 );
} else if ((EQUAL( map_proj_name, "SINUSOIDAL" )) ||
(EQUAL( map_proj_name, "SINUSOIDAL_EQUAL-AREA" ))) {
oSRS.OGRSpatialReference::SetSinusoidal ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MERCATOR" )) {
oSRS.OGRSpatialReference::SetMercator ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC" )) {
oSRS.OGRSpatialReference::SetPS ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "TRANSVERSE_MERCATOR" )) {
oSRS.OGRSpatialReference::SetTM ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_CONFORMAL_CONIC" )) {
oSRS.OGRSpatialReference::SetLCC ( first_std_parallel, second_std_parallel, center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "") ) {
/* no projection */
bProjectionSet = FALSE;
} else {
CPLDebug( "ISIS2",
"Dataset projection %s is not supported. Continuing...",
map_proj_name.c_str() );
bProjectionSet = FALSE;
}
if (bProjectionSet) {
//Create projection name, i.e. MERCATOR MARS and set as ProjCS keyword
CPLString proj_target_name = map_proj_name + " " + target_name;
oSRS.SetProjCS(proj_target_name); //set ProjCS keyword
//The geographic/geocentric name will be the same basic name as the body name
//'GCS' = Geographic/Geocentric Coordinate System
CPLString geog_name = "GCS_" + target_name;
//The datum and sphere names will be the same basic name aas the planet
CPLString datum_name = "D_" + target_name;
CPLString sphere_name = target_name; // + "_IAU_IAG"); //Might not be IAU defined so don't add
//calculate inverse flattening from major and minor axis: 1/f = a/(a-b)
if ((semi_major - semi_minor) < 0.0000001)
iflattening = 0;
else
iflattening = semi_major / (semi_major - semi_minor);
//Set the body size but take into consideration which proj is being used to help w/ proj4 compatibility
//The use of a Sphere, polar radius or ellipse here is based on how ISIS does it internally
if ( ( (EQUAL( map_proj_name, "STEREOGRAPHIC" ) && (fabs(center_lat) == 90)) ) ||
(EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC" )))
{
if (bIsGeographic) {
//Geograpraphic, so set an ellipse
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere using the semi-minor axis. I hope...
sphere_name += "_polarRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_minor, 0.0,
"Reference_Meridian", 0.0 );
}
}
else if ( (EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "ORTHOGRAPHIC" )) ||
(EQUAL( map_proj_name, "STEREOGRAPHIC" )) ||
(EQUAL( map_proj_name, "SINUSOIDAL_EQUAL-AREA" )) ||
(EQUAL( map_proj_name, "SINUSOIDAL" )) ) {
//isis uses the sphereical equation for these projections so force a sphere
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else if ((EQUAL( map_proj_name, "EQUIRECTANGULAR_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIRECTANGULAR" )) ) {
//Calculate localRadius using ISIS3 simple elliptical method
// not the more standard Radius of Curvature method
//PI = 4 * atan(1);
double radLat, localRadius;
if (center_lon == 0) { //No need to calculate local radius
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
} else {
radLat = center_lat * PI / 180; // in radians
localRadius = semi_major * semi_minor / sqrt(pow(semi_minor*cos(radLat),2)
+ pow(semi_major*sin(radLat),2) );
sphere_name += "_localRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
localRadius, 0.0,
"Reference_Meridian", 0.0 );
CPLDebug( "ISIS2", "local radius: %f", localRadius);
}
}
else {
//All other projections: Mercator, Transverse Mercator, Lambert Conformal, etc.
//Geographic, so set an ellipse
if (bIsGeographic) {
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere. I hope...
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
}
// translate back into a projection string.
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
poDS->osProjection = pszResult;
CPLFree( pszResult );
}
/* END ISIS2 Label Read */
/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
/* -------------------------------------------------------------------- */
/* Did we get the required keywords? If not we return with */
/* this never having been considered to be a match. This isn't */
/* an error! */
/* -------------------------------------------------------------------- */
if( nRows < 1 || nCols < 1 || nBands < 1 )
{
delete poDS;
return NULL;
}
/* -------------------------------------------------------------------- */
/* Capture some information from the file that is of interest. */
/* -------------------------------------------------------------------- */
poDS->nRasterXSize = nCols;
poDS->nRasterYSize = nRows;
/* -------------------------------------------------------------------- */
/* Open target binary file. */
/* -------------------------------------------------------------------- */
if( poOpenInfo->eAccess == GA_ReadOnly )
poDS->fpImage = VSIFOpenL( osTargetFile, "rb" );
else
poDS->fpImage = VSIFOpenL( osTargetFile, "r+b" );
if( poDS->fpImage == NULL )
{
CPLError( CE_Failure, CPLE_OpenFailed,
"Failed to open %s with write permission.\n%s",
osTargetFile.c_str(), VSIStrerror( errno ) );
delete poDS;
return NULL;
}
poDS->eAccess = poOpenInfo->eAccess;
/* -------------------------------------------------------------------- */
/* Compute the line offset. */
/* -------------------------------------------------------------------- */
int nItemSize = GDALGetDataTypeSize(eDataType)/8;
int nLineOffset, nPixelOffset, nBandOffset;
if( EQUAL(szLayout,"BIP") )
{
nPixelOffset = nItemSize * nBands;
nLineOffset = nPixelOffset * nCols;
nBandOffset = nItemSize;
}
else if( EQUAL(szLayout,"BSQ") )
{
nPixelOffset = nItemSize;
nLineOffset = nPixelOffset * nCols;
nBandOffset = nLineOffset * nRows;
}
else /* assume BIL */
{
nPixelOffset = nItemSize;
nLineOffset = nItemSize * nBands * nCols;
nBandOffset = nItemSize * nCols;
}
/* -------------------------------------------------------------------- */
/* Create band information objects. */
/* -------------------------------------------------------------------- */
int i;
poDS->nBands = nBands;;
for( i = 0; i < poDS->nBands; i++ )
{
RawRasterBand *poBand;
poBand =
new RawRasterBand( poDS, i+1, poDS->fpImage,
nSkipBytes + nBandOffset * i,
nPixelOffset, nLineOffset, eDataType,
#ifdef CPL_LSB
chByteOrder == 'I' || chByteOrder == 'L',
#else
chByteOrder == 'M',
#endif
TRUE );
if( bNoDataSet )
poBand->SetNoDataValue( dfNoData );
poDS->SetBand( i+1, poBand );
// Set offset/scale values at the PAM level.
poBand->SetOffset(
CPLAtofM(poDS->GetKeyword("QUBE.CORE_BASE","0.0")));
poBand->SetScale(
CPLAtofM(poDS->GetKeyword("QUBE.CORE_MULTIPLIER","1.0")));
}
/* -------------------------------------------------------------------- */
/* Check for a .prj file. For isis2 I would like to keep this in */
/* -------------------------------------------------------------------- */
CPLString osPath, osName;
osPath = CPLGetPath( poOpenInfo->pszFilename );
osName = CPLGetBasename(poOpenInfo->pszFilename);
const char *pszPrjFile = CPLFormCIFilename( osPath, osName, "prj" );
fp = VSIFOpenL( pszPrjFile, "r" );
if( fp != NULL )
{
char **papszLines;
OGRSpatialReference oSRS;
VSIFCloseL( fp );
papszLines = CSLLoad( pszPrjFile );
if( oSRS.importFromESRI( papszLines ) == OGRERR_NONE )
{
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
poDS->osProjection = pszResult;
CPLFree( pszResult );
}
CSLDestroy( papszLines );
}
if( dfULYMap != 0.5 || dfULYMap != 0.5 || dfXDim != 1.0 || dfYDim != 1.0 )
{
poDS->bGotTransform = TRUE;
poDS->adfGeoTransform[0] = dfULXMap;
poDS->adfGeoTransform[1] = dfXDim;
poDS->adfGeoTransform[2] = 0.0;
poDS->adfGeoTransform[3] = dfULYMap;
poDS->adfGeoTransform[4] = 0.0;
poDS->adfGeoTransform[5] = dfYDim;
}
if( !poDS->bGotTransform )
poDS->bGotTransform =
GDALReadWorldFile( poOpenInfo->pszFilename, "cbw",
poDS->adfGeoTransform );
if( !poDS->bGotTransform )
poDS->bGotTransform =
GDALReadWorldFile( poOpenInfo->pszFilename, "wld",
poDS->adfGeoTransform );
/* -------------------------------------------------------------------- */
/* Initialize any PAM information. */
/* -------------------------------------------------------------------- */
poDS->SetDescription( poOpenInfo->pszFilename );
poDS->TryLoadXML();
/* -------------------------------------------------------------------- */
/* Check for overviews. */
/* -------------------------------------------------------------------- */
poDS->oOvManager.Initialize( poDS, poOpenInfo->pszFilename );
return( poDS );
}
GDALDataset *VICARDataset::Open( GDALOpenInfo * poOpenInfo )
{
/* -------------------------------------------------------------------- */
/* Does this look like a VICAR dataset? */
/* -------------------------------------------------------------------- */
if( !Identify( poOpenInfo ) )
return NULL;
/* -------------------------------------------------------------------- */
/* Open the file using the large file API. */
/* -------------------------------------------------------------------- */
VSILFILE *fpQube = VSIFOpenL( poOpenInfo->pszFilename, "rb" );
if( fpQube == NULL )
return NULL;
VICARDataset *poDS = new VICARDataset();
if( ! poDS->oKeywords.Ingest( fpQube, poOpenInfo->pabyHeader ) ) {
VSIFCloseL( fpQube );
delete poDS;
return NULL;
}
VSIFCloseL( fpQube );
/***** CHECK ENDIANNESS **************/
const char *value = poDS->GetKeyword( "INTFMT" );
if (!EQUAL(value,"LOW") ) {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return FALSE;
}
value = poDS->GetKeyword( "REALFMT" );
if (!EQUAL(value,"RIEEE") ) {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return FALSE;
}
char chByteOrder = 'M';
value = poDS->GetKeyword( "BREALFMT" );
if (EQUAL(value,"VAX") ) {
chByteOrder = 'I';
}
/************ CHECK INSTRUMENT *****************/
/************ ONLY HRSC TESTED *****************/
bool bIsDTM = false;
value = poDS->GetKeyword( "DTM.DTM_OFFSET" );
if (!EQUAL(value,"") ) {
bIsDTM = true;
}
value = poDS->GetKeyword( "BLTYPE" );
if (!EQUAL(value,"M94_HRSC") && !bIsDTM ) {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s instrument not tested. Continue with caution!\n\n", value);
}
/*********** Grab layout type (BSQ, BIP, BIL) ************/
char szLayout[10] = "BSQ"; //default to band seq.
value = poDS->GetKeyword( "ORG" );
if (!EQUAL(value,"BSQ") )
{
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return FALSE;
}
strcpy(szLayout,"BSQ");
const int nCols = atoi(poDS->GetKeyword("NS"));
const int nRows = atoi(poDS->GetKeyword("NL"));
const int nBands = atoi(poDS->GetKeyword("NB"));
/*********** Grab record bytes **********/
int nSkipBytes = atoi(poDS->GetKeyword("NBB"));
GDALDataType eDataType = GDT_Byte;
double dfNoData = 0.0;
if (EQUAL( poDS->GetKeyword( "FORMAT" ), "BYTE" )) {
eDataType = GDT_Byte;
dfNoData = NULL1;
}
else if (EQUAL( poDS->GetKeyword( "FORMAT" ), "HALF" )) {
eDataType = GDT_Int16;
dfNoData = NULL2;
chByteOrder = 'I';
}
else if (EQUAL( poDS->GetKeyword( "FORMAT" ), "FULL" )) {
eDataType = GDT_UInt32;
dfNoData = 0;
}
else if (EQUAL( poDS->GetKeyword( "FORMAT" ), "REAL" )) {
eDataType = GDT_Float32;
dfNoData = NULL3;
chByteOrder = 'I';
}
else {
CPLError( CE_Failure, CPLE_AppDefined,
"Could not find known VICAR label entries!\n");
delete poDS;
return NULL;
}
if( nRows < 1 || nCols < 1 || nBands < 1 )
{
CPLError( CE_Failure, CPLE_AppDefined,
"File %s appears to be a VICAR file, but failed to find some "
"required keywords.",
poDS->GetDescription() );
return FALSE;
}
/* -------------------------------------------------------------------- */
/* Capture some information from the file that is of interest. */
/* -------------------------------------------------------------------- */
poDS->nRasterXSize = nCols;
poDS->nRasterYSize = nRows;
double dfULXMap=0.5;
double dfULYMap = 0.5;
double dfXDim = 1.0;
double dfYDim = 1.0;
double xulcenter = 0.0;
double yulcenter = 0.0;
value = poDS->GetKeyword("MAP.MAP_SCALE");
if (strlen(value) > 0 ) {
dfXDim = CPLAtof(value);
dfYDim = CPLAtof(value) * -1;
dfXDim = dfXDim * 1000.0;
dfYDim = dfYDim * 1000.0;
}
double dfSampleOffset_Shift =
CPLAtof(CPLGetConfigOption( "PDS_SampleProjOffset_Shift", "-0.5" ));
double dfLineOffset_Shift =
CPLAtof(CPLGetConfigOption( "PDS_LineProjOffset_Shift", "-0.5" ));
double dfSampleOffset_Mult =
CPLAtof(CPLGetConfigOption( "PDS_SampleProjOffset_Mult", "-1.0") );
double dfLineOffset_Mult =
CPLAtof( CPLGetConfigOption( "PDS_LineProjOffset_Mult", "1.0") );
/*********** Grab LINE_PROJECTION_OFFSET ************/
value = poDS->GetKeyword("MAP.LINE_PROJECTION_OFFSET");
if (strlen(value) > 0) {
yulcenter = CPLAtof(value);
dfULYMap = ((yulcenter + dfLineOffset_Shift) * -dfYDim * dfLineOffset_Mult);
}
/*********** Grab SAMPLE_PROJECTION_OFFSET ************/
value = poDS->GetKeyword("MAP.SAMPLE_PROJECTION_OFFSET");
if( strlen(value) > 0 ) {
xulcenter = CPLAtof(value);
dfULXMap = ((xulcenter + dfSampleOffset_Shift) * dfXDim * dfSampleOffset_Mult);
}
/* ==================================================================== */
/* Get the coordinate system. */
/* ==================================================================== */
bool bProjectionSet = true;
/*********** Grab TARGET_NAME ************/
/**** This is the planets name i.e. MARS ***/
const CPLString target_name = poDS->GetKeyword("MAP.TARGET_NAME");
/********** Grab MAP_PROJECTION_TYPE *****/
const CPLString map_proj_name
= poDS->GetKeyword( "MAP.MAP_PROJECTION_TYPE");
/****** Grab semi_major & convert to KM ******/
const double semi_major
= CPLAtof(poDS->GetKeyword( "MAP.A_AXIS_RADIUS")) * 1000.0;
/****** Grab semi-minor & convert to KM ******/
const double semi_minor
= CPLAtof(poDS->GetKeyword( "MAP.C_AXIS_RADIUS")) * 1000.0;
/*********** Grab CENTER_LAT ************/
const double center_lat =
CPLAtof(poDS->GetKeyword( "MAP.CENTER_LATITUDE"));
/*********** Grab CENTER_LON ************/
const double center_lon
= CPLAtof(poDS->GetKeyword( "MAP.CENTER_LONGITUDE"));
/********** Grab 1st std parallel *******/
const double first_std_parallel =
CPLAtof(poDS->GetKeyword( "MAP.FIRST_STANDARD_PARALLEL"));
/********** Grab 2nd std parallel *******/
const double second_std_parallel =
CPLAtof(poDS->GetKeyword( "MAP.SECOND_STANDARD_PARALLEL"));
/*** grab PROJECTION_LATITUDE_TYPE = "PLANETOCENTRIC" ****/
// Need to further study how ocentric/ographic will effect the gdal library.
// So far we will use this fact to define a sphere or ellipse for some projections
// Frank - may need to talk this over
bool bIsGeographic = true;
value = poDS->GetKeyword("MAP.COORDINATE_SYSTEM_NAME");
if (EQUAL( value, "PLANETOCENTRIC" ))
bIsGeographic = false;
/** Set oSRS projection and parameters --- all PDS supported types added if apparently supported in oSRS
"AITOFF", ** Not supported in GDAL??
"ALBERS",
"BONNE",
"BRIESEMEISTER", ** Not supported in GDAL??
"CYLINDRICAL EQUAL AREA",
"EQUIDISTANT",
"EQUIRECTANGULAR",
"GNOMONIC",
"HAMMER", ** Not supported in GDAL??
"HENDU", ** Not supported in GDAL??
"LAMBERT AZIMUTHAL EQUAL AREA",
"LAMBERT CONFORMAL",
"MERCATOR",
"MOLLWEIDE",
"OBLIQUE CYLINDRICAL",
"ORTHOGRAPHIC",
"SIMPLE CYLINDRICAL",
"SINUSOIDAL",
"STEREOGRAPHIC",
"TRANSVERSE MERCATOR",
"VAN DER GRINTEN", ** Not supported in GDAL??
"WERNER" ** Not supported in GDAL??
**/
CPLDebug( "PDS", "using projection %s\n\n", map_proj_name.c_str());
OGRSpatialReference oSRS;
if ((EQUAL( map_proj_name, "EQUIRECTANGULAR" )) ||
(EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ) {
oSRS.SetEquirectangular2 ( 0.0, center_lon, center_lat, 0, 0 );
} else if (EQUAL( map_proj_name, "ORTHOGRAPHIC" )) {
oSRS.SetOrthographic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "SINUSOIDAL" )) {
oSRS.SetSinusoidal ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MERCATOR" )) {
oSRS.SetMercator ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "STEREOGRAPHIC" )) {
oSRS.SetStereographic ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC")) {
oSRS.SetPS ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "TRANSVERSE_MERCATOR" )) {
oSRS.SetTM ( center_lat, center_lon, 1, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_CONFORMAL_CONIC" )) {
oSRS.SetLCC ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "LAMBERT_AZIMUTHAL_EQUAL_AREA" )) {
oSRS.SetLAEA( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "CYLINDRICAL_EQUAL_AREA" )) {
oSRS.SetCEA ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "MOLLWEIDE" )) {
oSRS.SetMollweide ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "ALBERS" )) {
oSRS.SetACEA ( first_std_parallel, second_std_parallel,
center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "BONNE" )) {
oSRS.SetBonne ( first_std_parallel, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "GNOMONIC" )) {
oSRS.SetGnomonic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "OBLIQUE_CYLINDRICAL" )) {
// hope Swiss Oblique Cylindrical is the same
oSRS.SetSOC ( center_lat, center_lon, 0, 0 );
} else {
CPLDebug( "VICAR",
"Dataset projection %s is not supported. Continuing...",
map_proj_name.c_str() );
bProjectionSet = false;
}
if (bProjectionSet) {
//Create projection name, i.e. MERCATOR MARS and set as ProjCS keyword
CPLString proj_target_name = map_proj_name + " " + target_name;
oSRS.SetProjCS(proj_target_name); //set ProjCS keyword
//The geographic/geocentric name will be the same basic name as the body name
//'GCS' = Geographic/Geocentric Coordinate System
CPLString geog_name = "GCS_" + target_name;
//The datum and sphere names will be the same basic name aas the planet
CPLString datum_name = "D_" + target_name;
CPLString sphere_name = target_name; // + "_IAU_IAG"); //Might not be IAU defined so don't add
//calculate inverse flattening from major and minor axis: 1/f = a/(a-b)
double iflattening = 0.0;
if ((semi_major - semi_minor) < 0.0000001)
iflattening = 0;
else
iflattening = semi_major / (semi_major - semi_minor);
//Set the body size but take into consideration which proj is being used to help w/ compatibility
//Notice that most PDS projections are spherical based on the fact that ISIS/PICS are spherical
//Set the body size but take into consideration which proj is being used to help w/ proj4 compatibility
//The use of a Sphere, polar radius or ellipse here is based on how ISIS does it internally
if ( ( (EQUAL( map_proj_name, "STEREOGRAPHIC" ) && (fabs(center_lat) == 90)) ) ||
(EQUAL( map_proj_name, "POLAR_STEREOGRAPHIC" )))
{
if (bIsGeographic) {
//Geograpraphic, so set an ellipse
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere using the semi-minor axis. I hope...
sphere_name += "_polarRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_minor, 0.0,
"Reference_Meridian", 0.0 );
}
}
else if ( (EQUAL( map_proj_name, "SIMPLE_CYLINDRICAL" )) ||
(EQUAL( map_proj_name, "EQUIDISTANT" )) ||
(EQUAL( map_proj_name, "ORTHOGRAPHIC" )) ||
(EQUAL( map_proj_name, "STEREOGRAPHIC" )) ||
(EQUAL( map_proj_name, "SINUSOIDAL" )) ) {
//isis uses the spherical equation for these projections so force a sphere
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else if (EQUAL( map_proj_name, "EQUIRECTANGULAR" )) {
//isis uses local radius as a sphere, which is pre-calculated in the PDS label as the semi-major
sphere_name += "_localRadius";
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else
{
//All other projections: Mercator, Transverse Mercator, Lambert Conformal, etc.
//Geographic, so set an ellipse
if (bIsGeographic) {
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
}
else
{
//Geocentric, so force a sphere. I hope...
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
}
// translate back into a projection string.
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
poDS->osProjection = pszResult;
CPLFree( pszResult );
}
{
poDS->bGotTransform = TRUE;
poDS->adfGeoTransform[0] = dfULXMap;
poDS->adfGeoTransform[1] = dfXDim;
poDS->adfGeoTransform[2] = 0.0;
poDS->adfGeoTransform[3] = dfULYMap;
poDS->adfGeoTransform[4] = 0.0;
poDS->adfGeoTransform[5] = dfYDim;
}
CPLString osQubeFile = poOpenInfo->pszFilename;
if( !poDS->bGotTransform )
poDS->bGotTransform =
GDALReadWorldFile( osQubeFile, "psw",
poDS->adfGeoTransform );
if( !poDS->bGotTransform )
poDS->bGotTransform =
GDALReadWorldFile( osQubeFile, "wld",
poDS->adfGeoTransform );
/* -------------------------------------------------------------------- */
/* Open target binary file. */
/* -------------------------------------------------------------------- */
if( poOpenInfo->eAccess == GA_ReadOnly )
poDS->fpImage = VSIFOpenL( osQubeFile, "r" );
else
poDS->fpImage = VSIFOpenL( osQubeFile, "r+" );
if( poDS->fpImage == NULL )
{
CPLError( CE_Failure, CPLE_OpenFailed,
"Failed to open %s with write permission.\n%s",
osQubeFile.c_str(),
VSIStrerror( errno ) );
delete poDS;
return NULL;
}
poDS->eAccess = poOpenInfo->eAccess;
/* -------------------------------------------------------------------- */
/* Compute the line offsets. */
/* -------------------------------------------------------------------- */
const long int nItemSize = GDALGetDataTypeSize(eDataType)/8;
const long int nPixelOffset = nItemSize;
const long int nLineOffset = nPixelOffset * nCols + atoi(poDS->GetKeyword("NBB")) ;
const long int nBandOffset = nLineOffset * nRows;
nSkipBytes = atoi(poDS->GetKeyword("LBLSIZE"));
/* -------------------------------------------------------------------- */
/* Create band information objects. */
/* -------------------------------------------------------------------- */
for( int i = 0; i < nBands; i++ )
{
GDALRasterBand *poBand
= new RawRasterBand( poDS, i+1, poDS->fpImage, nSkipBytes + nBandOffset * i,
nPixelOffset, nLineOffset, eDataType,
#ifdef CPL_LSB
chByteOrder == 'I' || chByteOrder == 'L',
#else
chByteOrder == 'M',
#endif
TRUE );
poDS->SetBand( i+1, poBand );
poBand->SetNoDataValue( dfNoData );
if (bIsDTM) {
poBand->SetScale( (double) CPLAtof(poDS->GetKeyword( "DTM.DTM_SCALING_FACTOR") ) );
poBand->SetOffset( (double) CPLAtof(poDS->GetKeyword( "DTM.DTM_OFFSET") ) );
const char* pszMin = poDS->GetKeyword( "DTM.DTM_MINIMUM_DN", NULL );
const char* pszMax = poDS->GetKeyword( "DTM.DTM_MAXIMUM_DN", NULL );
if (pszMin != NULL && pszMax != NULL )
poBand->SetStatistics(CPLAtofM(pszMin),CPLAtofM(pszMax),0,0);
const char* pszNoData = poDS->GetKeyword( "DTM.DTM_MISSING_DN", NULL );
if (pszNoData != NULL )
poBand->SetNoDataValue( CPLAtofM(pszNoData) );
} else if (EQUAL( poDS->GetKeyword( "BLTYPE"), "M94_HRSC" )) {
float scale=CPLAtof(poDS->GetKeyword("DLRTO8.REFLECTANCE_SCALING_FACTOR","-1."));
if (scale < 0.) {
scale = CPLAtof(poDS->GetKeyword( "HRCAL.REFLECTANCE_SCALING_FACTOR","1."));
}
poBand->SetScale( scale );
float offset=CPLAtof(poDS->GetKeyword("DLRTO8.REFLECTANCE_OFFSET","-1."));
if (offset < 0.) {
offset = CPLAtof(poDS->GetKeyword( "HRCAL.REFLECTANCE_OFFSET","0."));
}
poBand->SetOffset( offset );
}
const char* pszMin = poDS->GetKeyword( "STATISTICS.MINIMUM", NULL );
const char* pszMax = poDS->GetKeyword( "STATISTICS.MAXIMUM", NULL );
const char* pszMean = poDS->GetKeyword( "STATISTICS.MEAN", NULL );
const char* pszStdDev = poDS->GetKeyword( "STATISTICS.STANDARD_DEVIATION", NULL );
if (pszMin != NULL && pszMax != NULL && pszMean != NULL && pszStdDev != NULL )
poBand->SetStatistics(CPLAtofM(pszMin),CPLAtofM(pszMax),CPLAtofM(pszMean),CPLAtofM(pszStdDev));
}
/* -------------------------------------------------------------------- */
/* Instrument-specific keywords as metadata. */
/* -------------------------------------------------------------------- */
/****************** HRSC ******************************/
if (EQUAL( poDS->GetKeyword( "BLTYPE"), "M94_HRSC" ) ) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", poDS->GetKeyword( "M94_INSTRUMENT.INSTRUMENT_HOST_NAME") );
poDS->SetMetadataItem( "PRODUCT_TYPE", poDS->GetKeyword( "TYPE"));
if (EQUAL( poDS->GetKeyword( "M94_INSTRUMENT.DETECTOR_ID"), "MEX_HRSC_SRC" )) {
static const char *apszKeywords[] = {
"M94_ORBIT.IMAGE_TIME",
"FILE.EVENT_TYPE",
"FILE.PROCESSING_LEVEL_ID",
"M94_INSTRUMENT.DETECTOR_ID",
"M94_CAMERAS.EXPOSURE_DURATION",
"HRCONVER.INSTRUMENT_TEMPERATURE", NULL
};
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
} else {
static const char *apszKeywords[] = {
"M94_ORBIT.START_TIME", "M94_ORBIT.STOP_TIME",
"M94_INSTRUMENT.DETECTOR_ID",
"M94_CAMERAS.MACROPIXEL_SIZE",
"FILE.EVENT_TYPE",
"M94_INSTRUMENT.MISSION_PHASE_NAME",
"HRORTHO.SPICE_FILE_NAME",
"HRCONVER.MISSING_FRAMES", "HRCONVER.OVERFLOW_FRAMES", "HRCONVER.ERROR_FRAMES",
"HRFOOT.BEST_GROUND_SAMPLING_DISTANCE",
"DLRTO8.RADIANCE_SCALING_FACTOR", "DLRTO8.RADIANCE_OFFSET",
"DLRTO8.REFLECTANCE_SCALING_FACTOR", "DLRTO8.REFLECTANCE_OFFSET",
"HRCAL.RADIANCE_SCALING_FACTOR", "HRCAL.RADIANCE_OFFSET",
"HRCAL.REFLECTANCE_SCALING_FACTOR", "HRCAL.REFLECTANCE_OFFSET",
"HRORTHO.DTM_NAME", "HRORTHO.EXTORI_FILE_NAME", "HRORTHO.GEOMETRIC_CALIB_FILE_NAME",
NULL
};
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i], NULL );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
}
if (bIsDTM && EQUAL( poDS->GetKeyword( "MAP.TARGET_NAME"), "MARS" )) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", "MARS_EXPRESS" );
poDS->SetMetadataItem( "PRODUCT_TYPE", "DTM");
static const char *apszKeywords[] = {
"DTM.DTM_MISSING_DN", "DTM.DTM_OFFSET", "DTM.DTM_SCALING_FACTOR", "DTM.DTM_A_AXIS_RADIUS",
"DTM.DTM_B_AXIS_RADIUS", "DTM.DTM_C_AXIS_RADIUS", "DTM.DTM_DESC", "DTM.DTM_MINIMUM_DN",
"DTM.DTM_MAXIMUM_DN", NULL };
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
/****************** DAWN ******************************/
else if (EQUAL( poDS->GetKeyword( "INSTRUMENT_ID"), "FC2" )) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", "DAWN" );
static const char *apszKeywords[] = {"ORBIT_NUMBER","FILTER_NUMBER",
"FRONT_DOOR_STATUS",
"FIRST_LINE",
"FIRST_LINE_SAMPLE",
"PRODUCER_INSTITUTION_NAME",
"SOURCE_FILE_NAME",
"PROCESSING_LEVEL_ID",
"TARGET_NAME",
"LIMB_IN_IMAGE",
"POLE_IN_IMAGE",
"REFLECTANCE_SCALING_FACTOR",
"SPICE_FILE_NAME",
"SPACECRAFT_CENTRIC_LATITUDE",
"SPACECRAFT_EASTERN_LONGITUDE",
"FOOTPRINT_POSITIVE_LONGITUDE",
NULL };
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
else if (bIsDTM && EQUAL( poDS->GetKeyword( "TARGET_NAME"), "VESTA" )) {
poDS->SetMetadataItem( "SPACECRAFT_NAME", "DAWN" );
poDS->SetMetadataItem( "PRODUCT_TYPE", "DTM");
static const char *apszKeywords[] = {
"DTM_MISSING_DN", "DTM_OFFSET", "DTM_SCALING_FACTOR", "DTM_A_AXIS_RADIUS",
"DTM_B_AXIS_RADIUS", "DTM_C_AXIS_RADIUS", "DTM_MINIMUM_DN",
"DTM_MAXIMUM_DN", "MAP_PROJECTION_TYPE", "COORDINATE_SYSTEM_NAME",
"POSITIVE_LONGITUDE_DIRECTION", "MAP_SCALE",
"CENTER_LONGITUDE", "LINE_PROJECTION_OFFSET", "SAMPLE_PROJECTION_OFFSET",
NULL };
for( int i = 0; apszKeywords[i] != NULL; i++ ) {
const char *pszKeywordValue = poDS->GetKeyword( apszKeywords[i] );
if( pszKeywordValue != NULL )
poDS->SetMetadataItem( apszKeywords[i], pszKeywordValue );
}
}
/* -------------------------------------------------------------------- */
/* END Instrument-specific keywords as metadata. */
/* -------------------------------------------------------------------- */
if (EQUAL(poDS->GetKeyword( "EOL"), "1" ))
poDS->SetMetadataItem( "END-OF-DATASET_LABEL", "PRESENT" );
poDS->SetMetadataItem( "CONVERSION_DETAILS", "http://www.lpi.usra.edu/meetings/lpsc2014/pdf/1088.pdf" );
/* -------------------------------------------------------------------- */
/* Initialize any PAM information. */
/* -------------------------------------------------------------------- */
poDS->TryLoadXML();
/* -------------------------------------------------------------------- */
/* Check for overviews. */
/* -------------------------------------------------------------------- */
poDS->oOvManager.Initialize( poDS, poOpenInfo->pszFilename );
return( poDS );
}
/**
* Captures Geolocation information from a COSMO-SKYMED
* file.
* The geoid will allways be WGS84
* The projection type may be UTM or UPS, depending on the
* latitude from the center of the image.
* @param iProductType type of CSK subproduct, see HDF5CSKProduct
*/
void HDF5ImageDataset::CaptureCSKGeolocation(int iProductType)
{
double *dfProjFalseEastNorth;
double *dfProjScaleFactor;
double *dfCenterCoord;
//Set the ellipsoid to WGS84
oSRS.SetWellKnownGeogCS( "WGS84" );
if(iProductType == PROD_CSK_L1C||iProductType == PROD_CSK_L1D)
{
//Check if all the metadata attributes are present
if(HDF5ReadDoubleAttr("Map Projection False East-North", &dfProjFalseEastNorth) == CE_Failure||
HDF5ReadDoubleAttr("Map Projection Scale Factor", &dfProjScaleFactor) == CE_Failure||
HDF5ReadDoubleAttr("Map Projection Centre", &dfCenterCoord) == CE_Failure||
GetMetadataItem("Projection_ID") == NULL)
{
pszProjection = CPLStrdup("");
pszGCPProjection = CPLStrdup("");
CPLError( CE_Failure, CPLE_OpenFailed,
"The CSK hdf5 file geolocation information is malformed\n" );
}
else
{
//Fetch projection Type
CPLString osProjectionID = GetMetadataItem("Projection_ID");
//If the projection is UTM
if(EQUAL(osProjectionID,"UTM"))
{
// @TODO: use SetUTM
oSRS.SetProjCS(SRS_PT_TRANSVERSE_MERCATOR);
oSRS.SetTM(dfCenterCoord[0],
dfCenterCoord[1],
dfProjScaleFactor[0],
dfProjFalseEastNorth[0],
dfProjFalseEastNorth[1]);
}
else
{
//TODO Test! I didn't had any UPS projected files to test!
//If the projection is UPS
if(EQUAL(osProjectionID,"UPS"))
{
oSRS.SetProjCS(SRS_PT_POLAR_STEREOGRAPHIC);
oSRS.SetPS(dfCenterCoord[0],
dfCenterCoord[1],
dfProjScaleFactor[0],
dfProjFalseEastNorth[0],
dfProjFalseEastNorth[1]);
}
}
//Export Projection to Wkt.
//In case of error then clean the projection
if (oSRS.exportToWkt(&pszProjection) != OGRERR_NONE)
pszProjection = CPLStrdup("");
CPLFree(dfCenterCoord);
CPLFree(dfProjScaleFactor);
CPLFree(dfProjFalseEastNorth);
}
}
else
{
//Export GCPProjection to Wkt.
//In case of error then clean the projection
if(oSRS.exportToWkt(&pszGCPProjection) != OGRERR_NONE)
pszGCPProjection = CPLStrdup("");
}
}
IRaster* ingestGDALRaster()
{
GDALDataset* ds = gdalDataset;
cout << "Reading raster metadata...";
GDALRasterBand* band = ds->GetRasterBand(bandNum);
int xSize = band->GetXSize();
int ySize = band->GetYSize();
int hasNoDataValue;
double noDataValue = band->GetNoDataValue(&hasNoDataValue);
if (hasNoDataValue != 0)
noDataValue = NULL_DOUBLE_;
double xForm[6];
ds->GetGeoTransform(xForm);
double minX = xForm[0];
double cellSizeX = xForm[1];
double skewX = xForm[2];
double minY = xForm[3];
double skewY = xForm[4];
double cellSizeY = xForm[5];
string* spatialRef = new string(ds->GetProjectionRef());
if( ds->GetMetadataItem("NC_GLOBAL#IOAPI_VERSION", "") != NULL) {
// Get georeference from IOAPI metadata
// See: http://www.baronams.com/products/ioapi/GRIDS.html#horiz
// Build the affine transform from metadata
minX = atof(ds->GetMetadataItem("NC_GLOBAL#XORIG", ""));
minY = atof(ds->GetMetadataItem("NC_GLOBAL#YORIG", ""));
cellSizeX = atof(ds->GetMetadataItem("NC_GLOBAL#XCELL", ""));
cellSizeY = atof(ds->GetMetadataItem("NC_GLOBAL#YCELL", ""));
skewX = 0;
skewY = 0;
// Build the SpatialReference
double xcent, ycent, p_alp, p_bet, p_gam;
char *gdnam;
OGRSpatialReference* sref = new OGRSpatialReference("");
// Assume datum is WGS84 (may not be, but IO/API files don't (can't?) say...)
sref->SetWellKnownGeogCS("WGS84");
int gdtyp = atoi(ds->GetMetadataItem("NC_GLOBAL#GDTYP", ""));
switch(gdtyp) {
case 0:
// Unknown projection (we assume lat-lon)
break;
case 1:
// LATGRD3 -- Latitude/longitude
break;
case 2:
// LAMGRD3 -- Lambert Conformal Conic (two standard parallels)
xcent = atof(ds->GetMetadataItem("NC_GLOBAL#XCENT", ""));
ycent = atof(ds->GetMetadataItem("NC_GLOBAL#YCENT", ""));
p_alp = atof(ds->GetMetadataItem("NC_GLOBAL#P_ALP", ""));
p_bet = atof(ds->GetMetadataItem("NC_GLOBAL#P_BET", ""));
sref->SetLCC(p_alp, p_bet, ycent, xcent, 0, 0);
gdnam = (char *)ds->GetMetadataItem("NC_GLOBAL#GDNAM", "");
sref->SetProjCS(gdnam);
break;
case 9:
// ALBGRD3 -- Albers Equal-Area Conic
xcent = atof(ds->GetMetadataItem("NC_GLOBAL#XCENT", ""));
ycent = atof(ds->GetMetadataItem("NC_GLOBAL#YCENT", ""));
p_alp = atof(ds->GetMetadataItem("NC_GLOBAL#P_ALP", ""));
p_bet = atof(ds->GetMetadataItem("NC_GLOBAL#P_BET", ""));
sref->SetACEA(p_alp, p_bet, ycent, xcent, 0, 0);
gdnam = (char *)ds->GetMetadataItem("NC_GLOBAL#GDNAM", "");
sref->SetProjCS(gdnam);
break;
case 10:
// LEQGRID3 -- Lambert Azimuthal Equal-Area
p_alp = atof(ds->GetMetadataItem("NC_GLOBAL#P_ALP", ""));
// Correct for bad metadata on some files
if(p_alp == 0.0) {
xcent = atof(ds->GetMetadataItem("NC_GLOBAL#XCENT", ""));
ycent = atof(ds->GetMetadataItem("NC_GLOBAL#YCENT", ""));
p_alp = ycent;
p_gam = xcent;
} else {
p_gam = atof(ds->GetMetadataItem("NC_GLOBAL#P_GAM", ""));
}
sref->SetLAEA(p_alp, p_gam, 0, 0);
gdnam = (char *)ds->GetMetadataItem("NC_GLOBAL#GDNAM", "");
sref->SetProjCS(gdnam);
break;
default:
throw new runtime_error("ERROR: Unable to parse IO/API GDTYP variable");
}
char* wktSrStr = new char[spatialRef->length()];
strcpy((char *)spatialRef->c_str(), wktSrStr);
sref->exportToWkt(&wktSrStr);
//CPLFree(sref);
spatialRef->assign(wktSrStr);
}
cout << "...Done.\nReading raster band " << bandNum << "...";
IRaster* result = NULL;
CPLErr retval;
switch (band->GetRasterDataType()) {
//retval = band->RasterIO(GF_Read, 0, 0, band->XSize, band->YSize, floatArray, band->XSize, band->YSize, 0, 0);
case GDT_Float32: {
float* floatArray = new float[xSize * ySize];
retval = band->RasterIO(GF_Read, 0, 0, xSize, ySize, floatArray, xSize, ySize, band->GetRasterDataType(), 0, 0);
if (retval != CE_None)
throw new runtime_error("GDALRasterBand::ReadBlock() returned error");
result = new Raster<float>(floatArray, xSize, ySize, cellSizeX, cellSizeY, minX, minY, skewX, skewY, spatialRef, noDataValue);
cout << " -- Pixel type: Float32 -- ...Done\n";
} break;
case GDT_Float64: {
double* doubleArray = new double[xSize * ySize];
retval = band->RasterIO(GF_Read, 0, 0, xSize, ySize, doubleArray, xSize, ySize, band->GetRasterDataType(), 0, 0);
if (retval != CE_None)
throw new runtime_error("GDALRasterBand::ReadBlock() returned error");
result = new Raster<double>(doubleArray, xSize, ySize, cellSizeX, cellSizeY, minX, minY, skewX, skewY, spatialRef, noDataValue);
cout << " -- Pixel type: Float64 -- ...Done\n";
} break;
case GDT_Int32: {
int* intArray = new int[xSize * ySize];
retval = band->RasterIO(GF_Read, 0, 0, xSize, ySize, intArray, xSize, ySize, band->GetRasterDataType(), 0, 0);
if (retval != CE_None)
throw new runtime_error("GDALRasterBand::ReadBlock() returned error");
result = new Raster<int>(intArray, xSize, ySize, cellSizeX, cellSizeY, minX, minY, skewX, skewY, spatialRef, noDataValue);
cout << " -- Pixel type: Int32 -- ...Done\n";
} break;
case GDT_Int16: {
short* shortArray = new short[xSize * ySize];
retval = band->RasterIO(GF_Read, 0, 0, xSize, ySize, shortArray, xSize, ySize, band->GetRasterDataType(), 0, 0);
if (retval != CE_None)
throw new runtime_error("GDALRasterBand::ReadBlock() returned error");
result = new Raster<short>(shortArray, xSize, ySize, cellSizeX, cellSizeY, minX, minY, skewX, skewY, spatialRef, noDataValue);
cout << " -- Pixel type: Int32 -- ...Done\n";
} break;
case GDT_Byte: {
char* byteArray = new char[xSize * ySize];
retval = band->RasterIO(GF_Read, 0, 0, xSize, ySize, byteArray, xSize, ySize, band->GetRasterDataType(), 0, 0);
if (retval != CE_None)
throw new runtime_error("GDALRasterBand::ReadBlock() returned error");
result = new Raster<char>(byteArray, xSize, ySize, cellSizeX, cellSizeY, minX, minY, skewX, skewY, spatialRef, noDataValue);
cout << " -- Pixel type: Byte -- ...Done\n";
} break;
default:
throw new runtime_error("Unsupported pixel type");
}
return result;
}
GDALDataset *ISIS3Dataset::Open( GDALOpenInfo * poOpenInfo )
{
/* -------------------------------------------------------------------- */
/* Does this look like a CUBE dataset? */
/* -------------------------------------------------------------------- */
if( !Identify( poOpenInfo ) )
return NULL;
/* -------------------------------------------------------------------- */
/* Open the file using the large file API. */
/* -------------------------------------------------------------------- */
VSILFILE *fpQube = VSIFOpenL( poOpenInfo->pszFilename, "rb" );
if( fpQube == NULL )
return NULL;
ISIS3Dataset *poDS;
poDS = new ISIS3Dataset();
if( ! poDS->oKeywords.Ingest( fpQube, 0 ) )
{
VSIFCloseL( fpQube );
delete poDS;
return NULL;
}
VSIFCloseL( fpQube );
/* -------------------------------------------------------------------- */
/* Assume user is pointing to label (ie .lbl) file for detached option */
/* -------------------------------------------------------------------- */
// Image can be inline or detached and point to an image name
// the Format can be Tiled or Raw
// Object = Core
// StartByte = 65537
// Format = Tile
// TileSamples = 128
// TileLines = 128
//OR-----
// Object = Core
// StartByte = 1
// ^Core = r0200357_detatched.cub
// Format = BandSequential
//OR-----
// Object = Core
// StartByte = 1
// ^Core = r0200357_detached_tiled.cub
// Format = Tile
// TileSamples = 128
// TileLines = 128
/* -------------------------------------------------------------------- */
/* What file contains the actual data? */
/* -------------------------------------------------------------------- */
const char *pszCore = poDS->GetKeyword( "IsisCube.Core.^Core" );
CPLString osQubeFile;
if( EQUAL(pszCore,"") )
osQubeFile = poOpenInfo->pszFilename;
else
{
CPLString osPath = CPLGetPath( poOpenInfo->pszFilename );
osQubeFile = CPLFormFilename( osPath, pszCore, NULL );
poDS->osExternalCube = osQubeFile;
}
/* -------------------------------------------------------------------- */
/* Check if file an ISIS3 header file? Read a few lines of text */
/* searching for something starting with nrows or ncols. */
/* -------------------------------------------------------------------- */
GDALDataType eDataType = GDT_Byte;
OGRSpatialReference oSRS;
int nRows = -1;
int nCols = -1;
int nBands = 1;
int nSkipBytes = 0;
int tileSizeX = 0;
int tileSizeY = 0;
double dfULXMap=0.5;
double dfULYMap = 0.5;
double dfXDim = 1.0;
double dfYDim = 1.0;
double scaleFactor = 1.0;
double dfNoData = 0.0;
int bNoDataSet = FALSE;
char chByteOrder = 'M'; //default to MSB
char szLayout[32] = "BandSequential"; //default to band seq.
const char *target_name; //planet name
//projection parameters
const char *map_proj_name;
int bProjectionSet = TRUE;
char proj_target_name[200];
char geog_name[60];
char datum_name[60];
char sphere_name[60];
char bIsGeographic = TRUE;
double semi_major = 0.0;
double semi_minor = 0.0;
double iflattening = 0.0;
float center_lat = 0.0;
float center_lon = 0.0;
float first_std_parallel = 0.0;
float second_std_parallel = 0.0;
double radLat, localRadius;
VSILFILE *fp;
/************* Skipbytes *****************************/
nSkipBytes = atoi(poDS->GetKeyword("IsisCube.Core.StartByte","")) - 1;
/******* Grab format type (BandSequential, Tiled) *******/
const char *value;
value = poDS->GetKeyword( "IsisCube.Core.Format", "" );
if (EQUAL(value,"Tile") ) { //Todo
strcpy(szLayout,"Tiled");
/******* Get Tile Sizes *********/
tileSizeX = atoi(poDS->GetKeyword("IsisCube.Core.TileSamples",""));
tileSizeY = atoi(poDS->GetKeyword("IsisCube.Core.TileLines",""));
if (tileSizeX <= 0 || tileSizeY <= 0)
{
CPLError( CE_Failure, CPLE_OpenFailed, "Wrong tile dimensions : %d x %d",
tileSizeX, tileSizeY);
delete poDS;
return NULL;
}
}
else if (EQUAL(value,"BandSequential") )
strcpy(szLayout,"BSQ");
else {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout not supported. Abort\n\n", value);
delete poDS;
return NULL;
}
/*********** Grab samples lines band ************/
nCols = atoi(poDS->GetKeyword("IsisCube.Core.Dimensions.Samples",""));
nRows = atoi(poDS->GetKeyword("IsisCube.Core.Dimensions.Lines",""));
nBands = atoi(poDS->GetKeyword("IsisCube.Core.Dimensions.Bands",""));
/****** Grab format type - ISIS3 only supports 8,U16,S16,32 *****/
const char *itype;
itype = poDS->GetKeyword( "IsisCube.Core.Pixels.Type" );
if (EQUAL(itype,"UnsignedByte") ) {
eDataType = GDT_Byte;
dfNoData = NULL1;
bNoDataSet = TRUE;
}
else if (EQUAL(itype,"UnsignedWord") ) {
eDataType = GDT_UInt16;
dfNoData = NULL1;
bNoDataSet = TRUE;
}
else if (EQUAL(itype,"SignedWord") ) {
eDataType = GDT_Int16;
dfNoData = NULL2;
bNoDataSet = TRUE;
}
else if (EQUAL(itype,"Real") || EQUAL(value,"") ) {
eDataType = GDT_Float32;
dfNoData = NULL3;
bNoDataSet = TRUE;
}
else {
CPLError( CE_Failure, CPLE_OpenFailed,
"%s layout type not supported. Abort\n\n", itype);
delete poDS;
return NULL;
}
/*********** Grab samples lines band ************/
value = poDS->GetKeyword( "IsisCube.Core.Pixels.ByteOrder");
if (EQUAL(value,"Lsb"))
chByteOrder = 'I';
/*********** Grab Cellsize ************/
value = poDS->GetKeyword("IsisCube.Mapping.PixelResolution");
if (strlen(value) > 0 ) {
dfXDim = atof(value); /* values are in meters */
dfYDim = -atof(value);
}
/*********** Grab UpperLeftCornerY ************/
value = poDS->GetKeyword("IsisCube.Mapping.UpperLeftCornerY");
if (strlen(value) > 0) {
dfULYMap = atof(value);
}
/*********** Grab UpperLeftCornerX ************/
value = poDS->GetKeyword("IsisCube.Mapping.UpperLeftCornerX");
if( strlen(value) > 0 ) {
dfULXMap = atof(value);
}
/*********** Grab TARGET_NAME ************/
/**** This is the planets name i.e. Mars ***/
target_name = poDS->GetKeyword("IsisCube.Mapping.TargetName");
/*********** Grab MAP_PROJECTION_TYPE ************/
map_proj_name =
poDS->GetKeyword( "IsisCube.Mapping.ProjectionName");
/*********** Grab SEMI-MAJOR ************/
semi_major =
atof(poDS->GetKeyword( "IsisCube.Mapping.EquatorialRadius"));
/*********** Grab semi-minor ************/
semi_minor =
atof(poDS->GetKeyword( "IsisCube.Mapping.PolarRadius"));
/*********** Grab CENTER_LAT ************/
center_lat =
atof(poDS->GetKeyword( "IsisCube.Mapping.CenterLatitude"));
/*********** Grab CENTER_LON ************/
center_lon =
atof(poDS->GetKeyword( "IsisCube.Mapping.CenterLongitude"));
/*********** Grab 1st std parallel ************/
first_std_parallel =
atof(poDS->GetKeyword( "IsisCube.Mapping.FirstStandardParallel"));
/*********** Grab 2nd std parallel ************/
second_std_parallel =
atof(poDS->GetKeyword( "IsisCube.Mapping.SecondStandardParallel"));
/*********** Grab scaleFactor ************/
scaleFactor =
atof(poDS->GetKeyword( "IsisCube.Mapping.scaleFactor"));
/*** grab LatitudeType = Planetographic ****/
// Need to further study how ocentric/ographic will effect the gdal library
// So far we will use this fact to define a sphere or ellipse for some
// projections
// Frank - may need to talk this over
value = poDS->GetKeyword("IsisCube.Mapping.LatitudeType");
if (EQUAL( value, "\"Planetocentric\"" ))
bIsGeographic = FALSE;
//Set oSRS projection and parameters
//############################################################
//ISIS3 Projection types
// Equirectangular
// LambertConformal
// Mercator
// ObliqueCylindrical //Todo
// Orthographic
// PolarStereographic
// SimpleCylindrical
// Sinusoidal
// TransverseMercator
#ifdef DEBUG
CPLDebug( "ISIS3", "using projection %s", map_proj_name);
#endif
if ((EQUAL( map_proj_name, "Equirectangular" )) ||
(EQUAL( map_proj_name, "SimpleCylindrical" )) ) {
oSRS.OGRSpatialReference::SetEquirectangular2 ( 0.0, center_lon, center_lat, 0, 0 );
} else if (EQUAL( map_proj_name, "Orthographic" )) {
oSRS.OGRSpatialReference::SetOrthographic ( center_lat, center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "Sinusoidal" )) {
oSRS.OGRSpatialReference::SetSinusoidal ( center_lon, 0, 0 );
} else if (EQUAL( map_proj_name, "Mercator" )) {
oSRS.OGRSpatialReference::SetMercator ( center_lat, center_lon, scaleFactor, 0, 0 );
} else if (EQUAL( map_proj_name, "PolarStereographic" )) {
oSRS.OGRSpatialReference::SetPS ( center_lat, center_lon, scaleFactor, 0, 0 );
} else if (EQUAL( map_proj_name, "TransverseMercator" )) {
oSRS.OGRSpatialReference::SetTM ( center_lat, center_lon, scaleFactor, 0, 0 );
} else if (EQUAL( map_proj_name, "LambertConformal" )) {
oSRS.OGRSpatialReference::SetLCC ( first_std_parallel, second_std_parallel, center_lat, center_lon, 0, 0 );
} else {
CPLDebug( "ISIS3",
"Dataset projection %s is not supported. Continuing...",
map_proj_name );
bProjectionSet = FALSE;
}
if (bProjectionSet) {
//Create projection name, i.e. MERCATOR MARS and set as ProjCS keyword
strcpy(proj_target_name, map_proj_name);
strcat(proj_target_name, " ");
strcat(proj_target_name, target_name);
oSRS.SetProjCS(proj_target_name); //set ProjCS keyword
//The geographic/geocentric name will be the same basic name as the body name
//'GCS' = Geographic/Geocentric Coordinate System
strcpy(geog_name, "GCS_");
strcat(geog_name, target_name);
//The datum name will be the same basic name as the planet
strcpy(datum_name, "D_");
strcat(datum_name, target_name);
strcpy(sphere_name, target_name);
//strcat(sphere_name, "_IAU_IAG"); //Might not be IAU defined so don't add
//calculate inverse flattening from major and minor axis: 1/f = a/(a-b)
if ((semi_major - semi_minor) < 0.0000001)
iflattening = 0;
else
iflattening = semi_major / (semi_major - semi_minor);
//Set the body size but take into consideration which proj is being used to help w/ proj4 compatibility
//The use of a Sphere, polar radius or ellipse here is based on how ISIS does it internally
if ( ( (EQUAL( map_proj_name, "Stereographic" ) && (fabs(center_lat) == 90)) ) ||
(EQUAL( map_proj_name, "PolarStereographic" )) )
{
if (bIsGeographic) {
//Geograpraphic, so set an ellipse
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere using the semi-minor axis. I hope...
strcat(sphere_name, "_polarRadius");
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_minor, 0.0,
"Reference_Meridian", 0.0 );
}
}
else if ( (EQUAL( map_proj_name, "SimpleCylindrical" )) ||
(EQUAL( map_proj_name, "Orthographic" )) ||
(EQUAL( map_proj_name, "Stereographic" )) ||
(EQUAL( map_proj_name, "Sinusoidal" )) ) {
//isis uses the sphereical equation for these projections so force a sphere
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
else if (EQUAL( map_proj_name, "Equirectangular" )) {
//Calculate localRadius using ISIS3 simple elliptical method
// not the more standard Radius of Curvature method
//PI = 4 * atan(1);
radLat = center_lat * PI / 180; // in radians
localRadius = semi_major * semi_minor / sqrt(pow(semi_minor*cos(radLat),2)
+ pow(semi_major*sin(radLat),2) );
strcat(sphere_name, "_localRadius");
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
localRadius, 0.0,
"Reference_Meridian", 0.0 );
}
else {
//All other projections: Mercator, Transverse Mercator, Lambert Conformal, etc.
//Geographic, so set an ellipse
if (bIsGeographic) {
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, iflattening,
"Reference_Meridian", 0.0 );
} else {
//Geocentric, so force a sphere. I hope...
oSRS.SetGeogCS( geog_name, datum_name, sphere_name,
semi_major, 0.0,
"Reference_Meridian", 0.0 );
}
}
// translate back into a projection string.
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
poDS->osProjection = pszResult;
CPLFree( pszResult );
}
/* END ISIS3 Label Read */
/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
/* -------------------------------------------------------------------- */
/* Is the CUB detached - if so, reset name to binary file? */
/* -------------------------------------------------------------------- */
#ifdef notdef
// Frank - is this correct?
//The extension already added on so don't add another. But is this needed?
char *pszPath = CPLStrdup( CPLGetPath( poOpenInfo->pszFilename ) );
char *pszName = CPLStrdup( CPLGetBasename( poOpenInfo->pszFilename ) );
if (bIsDetached)
pszCUBFilename = CPLFormCIFilename( pszPath, detachedCub, "" );
#endif
/* -------------------------------------------------------------------- */
/* Did we get the required keywords? If not we return with */
/* this never having been considered to be a match. This isn't */
/* an error! */
/* -------------------------------------------------------------------- */
if( nRows < 1 || nCols < 1 || nBands < 1 )
{
delete poDS;
return NULL;
}
/* -------------------------------------------------------------------- */
/* Capture some information from the file that is of interest. */
/* -------------------------------------------------------------------- */
poDS->nRasterXSize = nCols;
poDS->nRasterYSize = nRows;
/* -------------------------------------------------------------------- */
/* Open target binary file. */
/* -------------------------------------------------------------------- */
if( poOpenInfo->eAccess == GA_ReadOnly )
poDS->fpImage = VSIFOpenL( osQubeFile, "r" );
else
poDS->fpImage = VSIFOpenL( osQubeFile, "r+" );
if( poDS->fpImage == NULL )
{
CPLError( CE_Failure, CPLE_OpenFailed,
"Failed to open %s with write permission.\n%s",
osQubeFile.c_str(),
VSIStrerror( errno ) );
delete poDS;
return NULL;
}
poDS->eAccess = poOpenInfo->eAccess;
/* -------------------------------------------------------------------- */
/* Compute the line offset. */
/* -------------------------------------------------------------------- */
int nItemSize = GDALGetDataTypeSize(eDataType)/8;
int nLineOffset=0, nPixelOffset=0, nBandOffset=0;
if( EQUAL(szLayout,"BSQ") )
{
nPixelOffset = nItemSize;
nLineOffset = nPixelOffset * nCols;
nBandOffset = nLineOffset * nRows;
}
else /* Tiled */
{
}
/* -------------------------------------------------------------------- */
/* Create band information objects. */
/* -------------------------------------------------------------------- */
int i;
#ifdef CPL_LSB
int bNativeOrder = !(chByteOrder == 'M');
#else
int bNativeOrder = (chByteOrder == 'M');
#endif
for( i = 0; i < nBands; i++ )
{
GDALRasterBand *poBand;
if( EQUAL(szLayout,"Tiled") )
{
poBand = new ISISTiledBand( poDS, poDS->fpImage, i+1, eDataType,
tileSizeX, tileSizeY,
nSkipBytes, 0, 0,
bNativeOrder );
}
else
{
poBand =
new RawRasterBand( poDS, i+1, poDS->fpImage,
nSkipBytes + nBandOffset * i,
nPixelOffset, nLineOffset, eDataType,
#ifdef CPL_LSB
chByteOrder == 'I' || chByteOrder == 'L',
#else
chByteOrder == 'M',
#endif
TRUE );
}
poDS->SetBand( i+1, poBand );
if( bNoDataSet )
((GDALPamRasterBand *) poBand)->SetNoDataValue( dfNoData );
// Set offset/scale values at the PAM level.
poBand->SetOffset(
CPLAtofM(poDS->GetKeyword("IsisCube.Core.Pixels.Base","0.0")));
poBand->SetScale(
CPLAtofM(poDS->GetKeyword("IsisCube.Core.Pixels.Multiplier","1.0")));
}
/* -------------------------------------------------------------------- */
/* Check for a .prj file. For ISIS3 I would like to keep this in */
/* -------------------------------------------------------------------- */
CPLString osPath, osName;
osPath = CPLGetPath( poOpenInfo->pszFilename );
osName = CPLGetBasename(poOpenInfo->pszFilename);
const char *pszPrjFile = CPLFormCIFilename( osPath, osName, "prj" );
fp = VSIFOpenL( pszPrjFile, "r" );
if( fp != NULL )
{
char **papszLines;
OGRSpatialReference oSRS;
VSIFCloseL( fp );
papszLines = CSLLoad( pszPrjFile );
if( oSRS.importFromESRI( papszLines ) == OGRERR_NONE )
{
char *pszResult = NULL;
oSRS.exportToWkt( &pszResult );
poDS->osProjection = pszResult;
CPLFree( pszResult );
}
CSLDestroy( papszLines );
}
if( dfULYMap != 0.5 || dfULYMap != 0.5 || dfXDim != 1.0 || dfYDim != 1.0 )
{
poDS->bGotTransform = TRUE;
poDS->adfGeoTransform[0] = dfULXMap;
poDS->adfGeoTransform[1] = dfXDim;
poDS->adfGeoTransform[2] = 0.0;
poDS->adfGeoTransform[3] = dfULYMap;
poDS->adfGeoTransform[4] = 0.0;
poDS->adfGeoTransform[5] = dfYDim;
}
if( !poDS->bGotTransform )
poDS->bGotTransform =
GDALReadWorldFile( poOpenInfo->pszFilename, "cbw",
poDS->adfGeoTransform );
if( !poDS->bGotTransform )
poDS->bGotTransform =
GDALReadWorldFile( poOpenInfo->pszFilename, "wld",
poDS->adfGeoTransform );
/* -------------------------------------------------------------------- */
/* Initialize any PAM information. */
/* -------------------------------------------------------------------- */
poDS->SetDescription( poOpenInfo->pszFilename );
poDS->TryLoadXML();
/* -------------------------------------------------------------------- */
/* Check for overviews. */
/* -------------------------------------------------------------------- */
poDS->oOvManager.Initialize( poDS, poOpenInfo->pszFilename );
return( poDS );
}
void SavePolygons( const std::vector< std::string > InFilenames,
const char *OutFilename,
const cv::Mat klabels,
const std::vector< cv::Mat > raster,
const std::vector< u_int32_t > labelpixels,
const std::vector< std::vector <double> > sumCH,
const std::vector< std::vector <double> > avgCH,
const std::vector< std::vector <double> > stdCH,
std::vector< std::vector< LINE > >& linelists )
{
CPLLocaleC oLocaleCForcer();
CPLErrorReset();
const char *pszDriverName = "ESRI Shapefile";
GDALDriver *liDriver;
liDriver = GetGDALDriverManager()->GetDriverByName(pszDriverName );
if( liDriver == NULL )
{
printf( "\nERROR: %s driver not available.\n", pszDriverName );
exit( 1 );
}
const size_t m_bands = raster.size();
const size_t m_labels = labelpixels.size();
GDALDataset *liDS;
liDS = liDriver->Create( OutFilename, 0, 0, 0, GDT_Unknown, NULL );
if( liDS == NULL )
{
printf( "\nERROR: Creation of output file failed.\n" );
exit( 1 );
}
// dataset
GDALDataset* piDataset;
piDataset = (GDALDataset*) GDALOpen(InFilenames[0].c_str(), GA_ReadOnly);
// spatialref
OGRSpatialReference oSRS;
oSRS.SetProjCS( piDataset->GetProjectionRef() );
OGRLayer *liLayer;
liLayer = liDS->CreateLayer( "segments", &oSRS, wkbPolygon, NULL );
if( liLayer == NULL )
{
printf( "\nERROR: Layer creation failed.\n" );
exit( 1 );
}
// spatial transform
double adfGeoTransform[6];
double oX = 0.0f; double oY = 0.0f;
double mX = 1.0f; double mY = -1.0f;
if( piDataset->GetGeoTransform( adfGeoTransform ) == CE_None ) {
oX = adfGeoTransform[0]; oY = adfGeoTransform[3];
mX = adfGeoTransform[1]; mY = adfGeoTransform[5];
}
GDALClose( (GDALDatasetH) piDataset );
OGRFieldDefn *clsIdField = new OGRFieldDefn( "CLASS", OFTInteger );
liLayer->CreateField( clsIdField );
OGRFieldDefn *pixArField = new OGRFieldDefn( "AREA", OFTInteger );
liLayer->CreateField( pixArField );
for ( size_t b = 0; b < m_bands; b++ )
{
stringstream value; value << b+1;
std::string FieldName = value.str() + "_AVERAGE";
OGRFieldDefn *lavrgField = new OGRFieldDefn( FieldName.c_str(), OFTReal );
liLayer->CreateField( lavrgField );
}
for ( size_t b = 0; b < m_bands; b++ )
{
stringstream value; value << b+1;
std::string FieldName = value.str() + "_STDDEV";
OGRFieldDefn *lavrgField = new OGRFieldDefn( FieldName.c_str(), OFTReal );
liLayer->CreateField( lavrgField );
}
int multiring = 0;
printf ("Write File: %s (polygon)\n", OutFilename);
for (size_t k = 0; k < m_labels; k++)
{
if (multiring == 1) {
k = k - 1;
multiring = 0;
}
if (linelists[k].size() == 0)
continue;
// insert field data
OGRFeature *liFeature;
liFeature = OGRFeature::CreateFeature( liLayer->GetLayerDefn() );
liFeature->SetField( "CLASS", (int) k );
liFeature->SetField( "AREA", (int) labelpixels.at(k) );
for ( size_t b = 0; b < m_bands; b++ )
{
stringstream value; value << b+1;
std::string FieldName = value.str() + "_AVERAGE";
liFeature->SetField( FieldName.c_str(), (double) avgCH[b].at(k) );
}
for ( size_t b = 0; b < m_bands; b++ )
{
stringstream value; value << b+1;
std::string FieldName = value.str() + "_STDDEV";
liFeature->SetField( FieldName.c_str(), stdCH[b].at(k) );
}
// initiate polygon start
OGRLinearRing linestring;
linestring.setCoordinateDimension(2);
linestring.addPoint( oX + (double) linelists[k][0].sX * mX, oY + mY * (double) linelists[k][0].sY );
linestring.addPoint( oX + (double) linelists[k][0].eX * mX, oY + mY * (double) linelists[k][0].eY );
linelists[k].erase( linelists[k].begin() );
// construct polygon from lines
while ( linelists[k].size() > 0 )
{
if (multiring == 1) break;
vector<LINE>::iterator it = linelists[k].begin();
for (; it != linelists[k].end(); ++it)
{
double ltX = linestring.getX(linestring.getNumPoints()-1);
double ltY = linestring.getY(linestring.getNumPoints()-1);
double csX = oX + (double) it->sX * mX;
double csY = oY + mY * (double) it->sY;
double ceX = oX + (double) it->eX * mX;
double ceY = oY + mY * (double) it->eY;
if ( ( csX == ltX ) && ( csY == ltY ) ) {
linestring.addPoint(ceX, ceY);
linelists[k].erase(it);
break;
}
if ( ( ceX == ltX ) && ( ceY == ltY ) ) {
linestring.addPoint(csX, csY);
linelists[k].erase(it);
break;
}
if (it == linelists[k].end()-1) {
multiring = 1;
break;
}
}
}
OGRPolygon polygon;
linestring.closeRings();
// simplify poligons
// remove colinear vertices
OGRLinearRing linesimple;
float pointPrevX = 0, pointPrevY = 0;
for (int i = 0; i < linestring.getNumPoints(); i++)
{
OGRPoint point;
linestring.getPoint(i, &point);
// start
if ( i == 0)
{
linesimple.addPoint( &point );
pointPrevX = point.getX();
pointPrevY = point.getY();
continue;
}
// end vertex
if ( i == linestring.getNumPoints() - 1 )
{
linesimple.addPoint( &point );
continue;
}
OGRPoint pointNext;
linestring.getPoint(i+1, &pointNext);
// | x1 y1 1 |
// det | x2 y2 1 | = 0 => p1,p2,p3 are colinear
// | x3 y3 1 |
// x1*(y2-y3) + x2*(y3-y1) + x3*(y1-y2) == 0
// only if not colinear with previous and next
if ( pointPrevX*(point.getY()-pointNext.getY()) +
point.getX()*(pointNext.getY()-pointPrevY) +
pointNext.getX()*(pointPrevY-point.getY()) != 0 )
{
linesimple.addPoint( &point );
pointPrevX = point.getX();
pointPrevY = point.getY();
}
}
// as polygon geometry
polygon.addRing( &linesimple );
liFeature->SetGeometry( &polygon );
if( liLayer->CreateFeature( liFeature ) != OGRERR_NONE )
{
printf( "\nERROR: Failed to create feature in shapefile.\n" );
exit( 1 );
}
OGRFeature::DestroyFeature( liFeature );
GDALTermProgress( (float)(k+1) / (float)(m_labels), NULL, NULL );
}
GDALTermProgress( 1.0f, NULL, NULL );
GDALClose( liDS );
}