void DIALOG_PLOT::applyPlotSettings()
{
REPORTER& reporter = m_messagesPanel->Reporter();
PCB_PLOT_PARAMS tempOptions;
tempOptions.SetExcludeEdgeLayer( m_excludeEdgeLayerOpt->GetValue() );
tempOptions.SetSubtractMaskFromSilk( m_subtractMaskFromSilk->GetValue() );
tempOptions.SetPlotFrameRef( m_plotSheetRef->GetValue() );
tempOptions.SetPlotPadsOnSilkLayer( m_plotPads_on_Silkscreen->GetValue() );
tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
tempOptions.SetPlotValue( m_plotModuleValueOpt->GetValue() );
tempOptions.SetPlotReference( m_plotModuleRefOpt->GetValue() );
tempOptions.SetPlotInvisibleText( m_plotInvisibleText->GetValue() );
tempOptions.SetScaleSelection( m_scaleOpt->GetSelection() );
tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
( m_drillShapeOpt->GetSelection() ) );
tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );
// Update settings from text fields. Rewrite values back to the fields,
// since the values may have been constrained by the setters.
// read HPLG pen size (this param is stored in mils)
wxString msg = m_HPGLPenSizeOpt->GetValue();
int tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;
if( !tempOptions.SetHPGLPenDiameter( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetHPGLPenDiameter() * IU_PER_MILS );
m_HPGLPenSizeOpt->SetValue( msg );
msg.Printf( _( "HPGL pen size constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// Read HPGL pen overlay (this param is stored in mils)
msg = m_HPGLPenOverlayOpt->GetValue();
tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;
if( !tempOptions.SetHPGLPenOverlay( tmp ) )
{
msg = StringFromValue( g_UserUnit,
tempOptions.GetHPGLPenOverlay() * IU_PER_MILS );
m_HPGLPenOverlayOpt->SetValue( msg );
msg.Printf( _( "HPGL pen overlay constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// Default linewidth
msg = m_linesWidth->GetValue();
tmp = ValueFromString( g_UserUnit, msg );
if( !tempOptions.SetLineWidth( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
m_linesWidth->SetValue( msg );
msg.Printf( _( "Default line width constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// X scale
double tmpDouble;
msg = m_fineAdjustXscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_XScaleAdjust );
m_fineAdjustXscaleOpt->SetValue( msg );
msg.Printf( _( "X scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );
// Y scale
msg = m_fineAdjustYscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_YScaleAdjust );
m_fineAdjustYscaleOpt->SetValue( msg );
msg.Printf( _( "Y scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );
// PS Width correction
msg = m_PSFineAdjustWidthOpt->GetValue();
int itmp = ValueFromString( g_UserUnit, msg );
if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
{
msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
m_PSFineAdjustWidthOpt->SetValue( msg );
msg.Printf( _( "Width correction constrained. "
"The reasonable width correction value must be in a range of "
" [%+f; %+f] (%s) for current design rules. " ),
To_User_Unit( g_UserUnit, m_widthAdjustMinValue ),
To_User_Unit( g_UserUnit, m_widthAdjustMaxValue ),
( g_UserUnit == INCHES ) ? wxT( "\"" ) : wxT( "mm" ) );
reporter.Report( msg, REPORTER::RPT_WARNING );
}
// Store m_PSWidthAdjust in mm in user config
ConfigBaseWriteDouble( m_config, CONFIG_PS_FINEWIDTH_ADJ,
(double)m_PSWidthAdjust / IU_PER_MM );
tempOptions.SetFormat( getPlotFormat() );
tempOptions.SetUseGerberExtensions( m_useGerberExtensions->GetValue() );
tempOptions.SetUseGerberAttributes( m_useGerberAttributes->GetValue() );
tempOptions.SetGerberPrecision( m_rbGerberFormat->GetSelection() == 0 ? 5 : 6 );
LSET selectedLayers;
for( unsigned i = 0; i < m_layerList.size(); i++ )
{
if( m_layerCheckListBox->IsChecked( i ) )
selectedLayers.set( m_layerList[i] );
}
tempOptions.SetLayerSelection( selectedLayers );
tempOptions.SetNegative( m_plotPSNegativeOpt->GetValue() );
tempOptions.SetA4Output( m_forcePSA4OutputOpt->GetValue() );
// Set output directory and replace backslashes with forward ones
wxString dirStr;
dirStr = m_outputDirectoryName->GetValue();
dirStr.Replace( wxT( "\\" ), wxT( "/" ) );
tempOptions.SetOutputDirectory( dirStr );
if( m_plotOpts != tempOptions )
{
m_parent->SetPlotSettings( tempOptions );
m_plotOpts = tempOptions;
m_parent->OnModify();
}
}
void DIALOG_PLOT::applyPlotSettings()
{
REPORTER& reporter = m_messagesPanel->Reporter();
PCB_PLOT_PARAMS tempOptions;
tempOptions.SetExcludeEdgeLayer( m_excludeEdgeLayerOpt->GetValue() );
tempOptions.SetSubtractMaskFromSilk( m_subtractMaskFromSilk->GetValue() );
tempOptions.SetPlotFrameRef( m_plotSheetRef->GetValue() );
tempOptions.SetPlotPadsOnSilkLayer( m_plotPads_on_Silkscreen->GetValue() );
tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
tempOptions.SetPlotValue( m_plotModuleValueOpt->GetValue() );
tempOptions.SetPlotReference( m_plotModuleRefOpt->GetValue() );
tempOptions.SetPlotInvisibleText( m_plotInvisibleText->GetValue() );
tempOptions.SetScaleSelection( m_scaleOpt->GetSelection() );
tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
( m_drillShapeOpt->GetSelection() ) );
tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
tempOptions.SetDXFPlotPolygonMode( m_DXF_plotModeOpt->GetValue() );
tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );
if( !m_DXF_plotTextStrokeFontOpt->IsEnabled() ) // Currently, only DXF supports this option
tempOptions.SetTextMode( PLOTTEXTMODE_DEFAULT );
else
tempOptions.SetTextMode( m_DXF_plotTextStrokeFontOpt->GetValue() ?
PLOTTEXTMODE_DEFAULT : PLOTTEXTMODE_NATIVE );
// Update settings from text fields. Rewrite values back to the fields,
// since the values may have been constrained by the setters.
// read HPLG pen size (this param is stored in mils)
wxString msg = m_HPGLPenSizeOpt->GetValue();
int tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;
if( !tempOptions.SetHPGLPenDiameter( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetHPGLPenDiameter() * IU_PER_MILS );
m_HPGLPenSizeOpt->SetValue( msg );
msg.Printf( _( "HPGL pen size constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// Default linewidth
msg = m_linesWidth->GetValue();
tmp = ValueFromString( g_UserUnit, msg );
if( !tempOptions.SetLineWidth( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
m_linesWidth->SetValue( msg );
msg.Printf( _( "Default line width constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// X scale
double tmpDouble;
msg = m_fineAdjustXscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_XScaleAdjust );
m_fineAdjustXscaleOpt->SetValue( msg );
msg.Printf( _( "X scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );
// Y scale
msg = m_fineAdjustYscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_YScaleAdjust );
m_fineAdjustYscaleOpt->SetValue( msg );
msg.Printf( _( "Y scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );
// PS Width correction
msg = m_PSFineAdjustWidthOpt->GetValue();
int itmp = ValueFromString( g_UserUnit, msg );
if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
{
msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
m_PSFineAdjustWidthOpt->SetValue( msg );
msg.Printf( _( "Width correction constrained. "
"The reasonable width correction value must be in a range of "
" [%+f; %+f] (%s) for current design rules. " ),
To_User_Unit( g_UserUnit, m_widthAdjustMinValue ),
To_User_Unit( g_UserUnit, m_widthAdjustMaxValue ),
( g_UserUnit == INCHES ) ? wxT( "\"" ) : wxT( "mm" ) );
reporter.Report( msg, REPORTER::RPT_WARNING );
}
// Store m_PSWidthAdjust in mm in user config
ConfigBaseWriteDouble( m_config, CONFIG_PS_FINEWIDTH_ADJ,
(double)m_PSWidthAdjust / IU_PER_MM );
tempOptions.SetFormat( getPlotFormat() );
tempOptions.SetUseGerberProtelExtensions( m_useGerberExtensions->GetValue() );
tempOptions.SetUseGerberAttributes( m_useGerberX2Attributes->GetValue() );
tempOptions.SetIncludeGerberNetlistInfo( m_useGerberNetAttributes->GetValue() );
tempOptions.SetCreateGerberJobFile( m_generateGerberJobFile->GetValue() );
tempOptions.SetGerberPrecision( m_rbGerberFormat->GetSelection() == 0 ? 5 : 6 );
LSET selectedLayers;
for( unsigned i = 0; i < m_layerList.size(); i++ )
{
if( m_layerCheckListBox->IsChecked( i ) )
selectedLayers.set( m_layerList[i] );
}
// Get a list of copper layers that aren't being used by inverting enabled layers.
LSET disabledCopperLayers = LSET::AllCuMask() & ~m_board->GetEnabledLayers();
// Enable all of the disabled copper layers.
// If someone enables more copper layers they will be selected by default.
selectedLayers = selectedLayers | disabledCopperLayers;
tempOptions.SetLayerSelection( selectedLayers );
tempOptions.SetNegative( m_plotPSNegativeOpt->GetValue() );
tempOptions.SetA4Output( m_forcePSA4OutputOpt->GetValue() );
// Set output directory and replace backslashes with forward ones
wxString dirStr;
dirStr = m_outputDirectoryName->GetValue();
dirStr.Replace( wxT( "\\" ), wxT( "/" ) );
tempOptions.SetOutputDirectory( dirStr );
if( !m_plotOpts.IsSameAs( tempOptions, false ) )
{
// First, mark board as modified only for parameters saved in file
if( !m_plotOpts.IsSameAs( tempOptions, true ) )
m_parent->OnModify();
// Now, save any change, for the session
m_parent->SetPlotSettings( tempOptions );
m_plotOpts = tempOptions;
}
}
/** Open a new plotfile using the options (and especially the format)
* specified in the options and prepare the page for plotting.
* Return the plotter object if OK, NULL if the file is not created
* (or has a problem)
*/
PLOTTER* StartPlotBoard( BOARD *aBoard, PCB_PLOT_PARAMS *aPlotOpts,
const wxString& aFullFileName,
const wxString& aSheetDesc )
{
// Create the plotter driver and set the few plotter specific
// options
PLOTTER* plotter = NULL;
switch( aPlotOpts->GetFormat() )
{
case PLOT_FORMAT_DXF:
plotter = new DXF_PLOTTER();
break;
case PLOT_FORMAT_POST:
PS_PLOTTER* PS_plotter;
PS_plotter = new PS_PLOTTER();
PS_plotter->SetScaleAdjust( aPlotOpts->GetFineScaleAdjustX(),
aPlotOpts->GetFineScaleAdjustY() );
plotter = PS_plotter;
break;
case PLOT_FORMAT_PDF:
plotter = new PDF_PLOTTER();
break;
case PLOT_FORMAT_HPGL:
HPGL_PLOTTER* HPGL_plotter;
HPGL_plotter = new HPGL_PLOTTER();
/* HPGL options are a little more convoluted to compute, so
they're split in an other function */
ConfigureHPGLPenSizes( HPGL_plotter, aPlotOpts );
plotter = HPGL_plotter;
break;
case PLOT_FORMAT_GERBER:
plotter = new GERBER_PLOTTER();
break;
case PLOT_FORMAT_SVG:
plotter = new SVG_PLOTTER();
break;
default:
wxASSERT( false );
return NULL;
}
// Compute the viewport and set the other options
// page layout is not mirrored, so temporary change mirror option
// just to plot the page layout
PCB_PLOT_PARAMS plotOpts = *aPlotOpts;
if( plotOpts.GetPlotFrameRef() && plotOpts.GetMirror() )
plotOpts.SetMirror( false );
initializePlotter( plotter, aBoard, &plotOpts );
if( plotter->OpenFile( aFullFileName ) )
{
plotter->StartPlot();
// Plot the frame reference if requested
if( aPlotOpts->GetPlotFrameRef() )
{
PlotWorkSheet( plotter, aBoard->GetTitleBlock(),
aBoard->GetPageSettings(),
1, 1, // Only one page
aSheetDesc, aBoard->GetFileName() );
if( aPlotOpts->GetMirror() )
initializePlotter( plotter, aBoard, aPlotOpts );
}
/* When plotting a negative board: draw a black rectangle
* (background for plot board in white) and switch the current
* color to WHITE; note the color inversion is actually done
* in the driver (if supported) */
if( aPlotOpts->GetNegative() )
{
EDA_RECT bbox = aBoard->ComputeBoundingBox();
FillNegativeKnockout( plotter, bbox );
}
return plotter;
}
delete plotter;
return NULL;
}
