wxArrayString DirectCommands::GetTargetCompileCommands(ProjectBuildTarget* target, bool force)
{
// Manager::Get()->GetLogManager()->DebugLog(wxString("-----GetTargetCompileCommands-----"));
wxArrayString ret;
// ret.Add(wxString(COMPILER_SIMPLE_LOG) + _("Switching to target: ") + target->GetTitle());
// NOTE: added this to notify compiler about the active target.
// this is needed when targets use different compiler each
// and C::B tries to parse the compiler's output.
// previous behaviour, used the project's compiler for parsing
// all targets output, which failed when a target's compiler
// was different than the project's...
// ret.Add(wxString(COMPILER_TARGET_CHANGE) + target->GetTitle());
m_pCurrTarget = target;
// set list of #include directories
DepsSearchStart(target);
// iterate all files of the project/target and add them to the build process
size_t counter = ret.GetCount();
MyFilesArray files = GetProjectFilesSortedByWeight(target, true, false);
size_t fcount = files.GetCount();
bool ldcheck = false;
for (unsigned int i = 0; i < fcount; ++i)
{
ProjectFile* pf = files[i];
// auto-generated files are handled automatically in GetCompileFileCommand()
if (pf->AutoGeneratedBy())
{
continue;
}
const pfDetails& pfd = pf->GetFileDetails(target);
wxString err;
if (force || IsObjectOutdated(target, pfd, &err))
{
// compile file
if(m_pCompiler->GetParentID().Matches(_T("lcy")))
{
if(pf->file.GetExt().Lower().IsSameAs(_T("ld")))
{
ldcheck= true;
}
}
wxArrayString filecmd = GetCompileFileCommand(target, pf);
AppendArray(filecmd, ret);
}
else
{
if (!err.IsEmpty())
ret.Add(wxString(COMPILER_SIMPLE_LOG) + err);
}
if(m_doYield)
Manager::Yield();
}
// add link command
wxArrayString link = GetLinkCommands(target, ldcheck ? ldcheck : ret.GetCount() != counter);
AppendArray(link, ret);
// remove "switching to target" message if no compile needed
// bool needPost = ret.GetCount() != counter;
// if (!needPost)
// ret.Clear();
return ret;
}
wxArrayString DirectCommands::GetTargetLinkCommands(ProjectBuildTarget* target, bool force) const
{
wxArrayString ret;
wxString output = target->GetOutputFilename();
Manager::Get()->GetMacrosManager()->ReplaceMacros(output, target);
wxFileName out = UnixFilename(output);
wxString linkfiles;
wxString FlatLinkFiles;
wxString resfiles;
bool IsOpenWatcom = target->GetCompilerID().IsSameAs(_T("ow"));
time_t outputtime;
depsTimeStamp(output.mb_str(), &outputtime);
if (!outputtime)
force = true;
wxArrayString fileMissing;
if ( AreExternalDepsOutdated(target, out.GetFullPath(), &fileMissing) )
force = true;
if (!fileMissing.IsEmpty())
{
wxString warn;
#ifdef NO_TRANSLATION
warn.Printf(wxT("WARNING: Target '%s': Unable to resolve %lu external dependenc%s:"),
target->GetFullTitle().wx_str(), static_cast<unsigned long>(fileMissing.Count()), wxString(fileMissing.Count() == 1 ? wxT("y") : wxT("ies")).wx_str());
#else
warn.Printf(_("WARNING: Target '%s': Unable to resolve %lu external dependency/ies:"),
target->GetFullTitle().wx_str(), static_cast<unsigned long>(fileMissing.Count()));
#endif // NO_TRANSLATION
ret.Add(COMPILER_WARNING_LOG + warn);
for (size_t i = 0; i < fileMissing.Count(); ++i)
ret.Add(COMPILER_NOTE_LOG + wxString(wxT(' '), 8) + fileMissing[i]);
}
Compiler* compiler = target ? CompilerFactory::GetCompiler(target->GetCompilerID()) : m_pCompiler;
wxString prependHack; // part of the following hack
if (target->GetTargetType() == ttStaticLib)
{
// QUICK HACK: some linkers (e.g. bcc, dmc) require a - or + in front of
// object files for static library. What we 'll do here until we redesign
// the thing, is to accept this symbol as part of the $link_objects macro
// like this:
// $+link_objects
// $-link_objects
// $-+link_objects
// $+-link_objects
//
// So, we first scan the command for this special case and, if found,
// set a flag so that the linkfiles array is filled with the correct options
wxString compilerCmd = compiler ? compiler->GetCommand(ctLinkStaticCmd) : wxString(wxEmptyString);
wxRegEx re(_T("\\$([-+]+)link_objects"));
if (re.Matches(compilerCmd))
prependHack = re.GetMatch(compilerCmd, 1);
}
// get all the linkable objects for the target
MyFilesArray files = GetProjectFilesSortedByWeight(target, false, true);
if (files.GetCount() == 0)
{
if (target->GetTargetType() != ttCommandsOnly)
ret.Add(COMPILER_SIMPLE_LOG + _("Linking stage skipped (build target has no object files to link)"));
return ret;
}
if (IsOpenWatcom && target->GetTargetType() != ttStaticLib)
linkfiles << _T("file ");
bool subseq(false);
for (unsigned int i = 0; i < files.GetCount(); ++i)
{
ProjectFile* pf = files[i];
// we have to test again for each file if it is to be compiled
// and we can't check the file for existence because we 're still
// generating the command lines that will create the files...
wxString macro = _T("$compiler");
m_pGenerator->GenerateCommandLine(macro, target, pf, wxEmptyString, wxEmptyString, wxEmptyString, wxEmptyString);
if (macro.IsEmpty())
continue;
const pfDetails& pfd = pf->GetFileDetails(target);
wxString Object = (compiler->GetSwitches().UseFlatObjects) ? pfd.object_file_flat
: pfd.object_file;
if (FileTypeOf(pf->relativeFilename) == ftResource)
{
if (subseq)
resfiles << _T(" ");
// -----------------------------------------
// Following lines have been modified for OpenWatcom
if (IsOpenWatcom)
resfiles << _T("option resource=") << Object;
else
resfiles << Object;
// ------------------------------------------
}
else
{
// -----------------------------------------
// Following lines have been modified for OpenWatcom
if (IsOpenWatcom && target->GetTargetType() == ttStaticLib)
{
if (subseq)
{
linkfiles << _T(" ");
FlatLinkFiles << _T(" ");
}
linkfiles << prependHack << Object; // see QUICK HACK above (prependHack)
FlatLinkFiles << prependHack << pfd.object_file_flat; // see QUICK HACK above (prependHack)
}
else
{
if (subseq)
{
linkfiles << compiler->GetSwitches().objectSeparator;
FlatLinkFiles << compiler->GetSwitches().objectSeparator;
}
linkfiles << prependHack << Object; // see QUICK HACK above (prependHack)
FlatLinkFiles << prependHack << pfd.object_file_flat; // see QUICK HACK above (prependHack)
}
// -----------------------------------------
}
subseq = true;
// timestamp check
if (!force)
{
time_t objtime;
depsTimeStamp(pfd.object_file_native.mb_str(), &objtime);
// Honor compiler request to Use Flat Objects
// (Settings/compiler/otherSettings/advancedOptions/Others/UseFlatObjects)
if (compiler->GetSwitches().UseFlatObjects)
depsTimeStamp(pfd.object_file_flat.mb_str(), &objtime);
if (!objtime)
force = true;
if (objtime > outputtime)
force = true;
}
}
if (IsOpenWatcom)
{
linkfiles.Trim();
}
if (!force)
return ret;
// create output dir
out.MakeAbsolute(m_pProject->GetBasePath());
wxString dstname = out.GetPath(wxPATH_GET_VOLUME | wxPATH_GET_SEPARATOR);
Manager::Get()->GetMacrosManager()->ReplaceMacros(dstname, target);
if (!dstname.IsEmpty() && !CreateDirRecursively(dstname, 0755))
{
cbMessageBox(_("Can't create output directory ") + dstname);
}
// add actual link command
wxString kind_of_output;
CommandType ct = ctCount; // get rid of compiler warning
switch (target->GetTargetType())
{
case ttConsoleOnly:
ct = ctLinkConsoleExeCmd;
kind_of_output = _("console executable");
break;
case ttExecutable:
ct = ctLinkExeCmd;
kind_of_output = _("executable");
break;
case ttDynamicLib:
ct = ctLinkDynamicCmd;
kind_of_output = _("dynamic library");
break;
case ttStaticLib:
ct = ctLinkStaticCmd;
kind_of_output = _("static library");
break;
case ttNative:
ct = ctLinkNativeCmd;
kind_of_output = _("native");
break;
case ttCommandsOnly:
// add target post-build commands
ret.Clear();
AppendArray(GetPostBuildCommands(target), ret);
return ret;
break;
default:
wxString ex;
ex.Printf(_T("Encountered invalid TargetType (value = %d)"), target->GetTargetType());
cbThrow(ex);
break;
}
wxString compilerCmd = compiler->GetCommand(ct);
m_pGenerator->GenerateCommandLine(compilerCmd,
target,
0,
_T(""),
linkfiles,
FlatLinkFiles,
resfiles);
if (!compilerCmd.IsEmpty())
{
switch (compiler->GetSwitches().logging)
{
case clogFull:
ret.Add(COMPILER_SIMPLE_LOG + compilerCmd);
break;
case clogSimple: // fall-through
case clogNone: // fall-through
default: // linker always simple log (if not full)
ret.Add(COMPILER_SIMPLE_LOG + _("Linking ") + kind_of_output + _T(": ") + output);
break;
}
// for an explanation of the following, see GetTargetCompileCommands()
if (target && ret.GetCount() != 0)
ret.Add(COMPILER_TARGET_CHANGE + target->GetTitle());
// the 'true' will make sure all commands will be prepended by
// COMPILER_WAIT signal
AddCommandsToArray(compilerCmd, ret, true, true);
}
else
ret.Add(COMPILER_SIMPLE_LOG + _("Skipping linking (no linker program set): ") + output);
return ret;
}
bool cbMGMakefile::reLoadDependecies(const wxString &p_DepsFileName,ProjectBuildTarget *p_pTarget,Compiler* p_pCompiler)
{
m_Deps.Clear();
if ( !wxFileExists( p_DepsFileName ) )
{
wxString l_Msg = _( "Dependencies file (.depend) is absent!\n"
"C::B MakefileGen could not complete the operation." );
cbMessageBox( l_Msg, _( "Error" ), wxICON_ERROR | wxOK, (wxWindow *)Manager::Get()->GetAppWindow() );
Manager::Get()->GetMessageManager()->DebugLog( l_Msg );
return false;
}
wxString l_Buf;
wxString l_VarName;
wxTextFile l_DepFile;
bool IsSkipThisFile = true;
if (l_DepFile.Open( p_DepsFileName, wxConvFile ))
{
for ( unsigned long i = 0; i < l_DepFile.GetLineCount(); i++ )
{
l_Buf = l_DepFile[i];
l_Buf.Trim(true);
// Wrong! Don't uncomment it! Being deleted '\t' symbol! l_Buf.Trim(false);
if ( l_Buf.IsEmpty() )
{
l_VarName.Clear();
IsSkipThisFile = true;
continue;
}
if ( _T('#') == l_Buf[0] ) continue;
if ( _T('\t') == l_Buf[0] )
{
if ( !IsSkipThisFile )
{
if ( _T('"') == l_Buf[1] )
{
wxString l_TmpName = l_Buf.AfterFirst( _T('\t') );
if (!l_TmpName.IsEmpty() && l_TmpName.GetChar(0) == _T('"') && l_TmpName.Last() == _T('"'))
l_TmpName = l_TmpName.Mid(1, l_TmpName.Length() - 2);
QuoteStringIfNeeded( l_TmpName );
m_Deps.AppendValue( l_VarName, l_TmpName );
}
}
}
else
{
l_VarName = l_Buf.AfterFirst(_T(' '));
bool IsSource = l_VarName.Matches( _T("source:*") );
if ( IsSource )
{
l_VarName = l_VarName.AfterFirst( _T(':') );
}
/*
* You would MUST found source file and get his filename from project
* !!! .depend file content lowcase filenames
*/
wxFileName l_DepFileName = l_VarName;
ProjectFile *pf = m_pProj->GetFileByFilename( l_DepFileName.GetFullPath(), l_DepFileName.IsRelative(), false );
if ( pf )
{
const pfDetails& pfd = pf->GetFileDetails( p_pTarget );
if ( p_pCompiler->GetSwitches().UseFullSourcePaths )
{
l_VarName = UnixFilename( pfd.source_file_absolute_native );
}
else
{
l_VarName = pfd.source_file;
}
QuoteStringIfNeeded( l_VarName );
IsSkipThisFile = false;
}
else
{
IsSkipThisFile = true;
}
}
}
}
/* FIXME (kisoftcb#1#): Next code for debug only!
wxTextFile l_DebFile;
l_DebFile.Create( _T("D:/DepsFile.log") );
m_Deps.SaveAllVars( l_DebFile );
l_DebFile.Write();
l_DebFile.Close(); */
/* return was absent here! */
return true;
}
bool cbMGMakefile::formFileForTarget( ProjectBuildTarget *p_BuildTarget, wxTextFile &p_File )
{
bool l_Ret = false;
if ( !p_BuildTarget )
{
wxString l_Msg = _( "Can't found an active target!\n"
"C::B MakefileGen could not complete the operation." );
cbMessageBox( l_Msg, _( "Error" ), wxICON_ERROR | wxOK, (wxWindow *)Manager::Get()->GetAppWindow() );
Manager::Get()->GetMessageManager()->DebugLog( l_Msg );
return l_Ret;
}
wxString l_TargetName = p_BuildTarget->GetTitle();
wxString l_ObjsName = _T("OBJS_") + l_TargetName.Upper();
wxString l_CmdBefore = cmdbefore + _T('_') + l_TargetName;
wxString l_CmdAfter = cmdafter + _T('_') + l_TargetName;
wxString l_CmdClean = cmdclean + _T('_') + l_TargetName;
m_Rules.Clear();
const wxString& l_CompilerId = p_BuildTarget->GetCompilerID();
Compiler* l_pCompiler = CompilerFactory::GetCompiler( l_CompilerId );
if( !l_pCompiler )
{
wxString l_Msg = _( "Can't found an compiler settings!\n"
"C::B MakefileGen could not complete the operation." );
cbMessageBox( l_Msg, _( "Error" ), wxICON_ERROR | wxOK, (wxWindow *)Manager::Get()->GetAppWindow() );
Manager::Get()->GetMessageManager()->DebugLog( l_Msg );
return false;
}
if ( !getDependencies( p_BuildTarget, l_pCompiler ) ) return false;
if ( !m_VariablesIsSaved )
{
m_Variables.AddVariable(_T("CPP"),l_pCompiler->GetPrograms().CPP);
m_Variables.AddVariable(_T("CC"),l_pCompiler->GetPrograms().C);
m_Variables.AddVariable(_T("LD"),l_pCompiler->GetPrograms().LD);
m_Variables.AddVariable(_T("LIB"),l_pCompiler->GetPrograms().LIB);
m_Variables.AddVariable(_T("WINDRES"),l_pCompiler->GetPrograms().WINDRES);
}
const wxArrayString& l_CommandsBeforeBuild = p_BuildTarget->GetCommandsBeforeBuild();
const wxArrayString& l_CommandsAfterBuild = p_BuildTarget->GetCommandsAfterBuild();
wxString l_TargetFileName = p_BuildTarget->GetOutputFilename();
Manager::Get()->GetMacrosManager()->ReplaceMacros(l_TargetFileName, p_BuildTarget);
wxFileName l_OutFileName = UnixFilename(l_TargetFileName);
cbMGRule l_Rule;
if ( 0 == l_TargetName.CmpNoCase( _T( "default" ) ) )
{
l_Rule.SetTarget( _T( "all" ) );
}
else
{
l_Rule.SetTarget( l_TargetName );
}
wxString l_Pre;
if ( l_CommandsBeforeBuild.GetCount() > 0 )
{
l_Pre = l_CmdBefore;
}
l_Pre += l_OutFileName.GetFullPath();
if ( l_CommandsAfterBuild.GetCount() > 0 )
{
l_Pre += _T(" ") + l_CmdAfter;
}
l_Rule.SetPrerequisites( l_Pre );
m_Rules.Add( l_Rule );
if ( l_CommandsBeforeBuild.GetCount() > 0 )
{
l_Rule.Clear();
l_Rule.SetTarget( cmdphony );
l_Rule.SetPrerequisites( l_CmdBefore );
m_Rules.Add( l_Rule );
l_Rule.Clear();
l_Rule.SetTarget( l_CmdBefore );
for ( unsigned long idx = 0; idx < l_CommandsBeforeBuild.GetCount(); idx ++ )
{
l_Rule.AddCommand( l_CommandsBeforeBuild[ idx ] );
}
m_Rules.Add( l_Rule );
}
if ( l_CommandsAfterBuild.GetCount() > 0 )
{
l_Rule.Clear();
l_Rule.SetTarget( cmdphony );
l_Rule.SetPrerequisites( l_CmdAfter );
m_Rules.Add( l_Rule );
l_Rule.Clear();
l_Rule.SetTarget( l_CmdAfter );
for ( unsigned long idx = 0; idx < l_CommandsAfterBuild.GetCount(); idx ++ )
{
l_Rule.AddCommand( l_CommandsAfterBuild[ idx ] );
}
m_Rules.Add( l_Rule );
}
l_Rule.Clear();
l_Rule.SetTarget( l_OutFileName.GetFullPath() );
l_Rule.SetPrerequisites( _T("$(") + l_ObjsName + _T(")") );
wxString kind_of_output = _T( "unknown" );
/* ctInvalid was deleted */
/* FIXME (shl#1#): Wrongly used ctCompileObjectCmd. Can have problems . */
CommandType ct = ctCompileObjectCmd; // get rid of compiler warning
switch ( p_BuildTarget->GetTargetType() )
{
case ttConsoleOnly:
ct = ctLinkConsoleExeCmd;
kind_of_output = _T( "console executable" );
break;
case ttExecutable:
ct = ctLinkExeCmd;
kind_of_output = _T( "executable" );
break;
case ttDynamicLib:
ct = ctLinkDynamicCmd;
kind_of_output = _T( "dynamic library" );
break;
case ttStaticLib:
ct = ctLinkStaticCmd;
kind_of_output = _T( "static library" );
break;
case ttNative:
ct = ctLinkNativeCmd;
kind_of_output = _T( "native" );
break;
case ttCommandsOnly:
ct = ctLinkConsoleExeCmd;
kind_of_output = _T( "commands only" );
break;
// case ttCommandsOnly:
// // add target post-build commands
// ret.Clear();
// AppendArray(GetPostBuildCommands(target), ret);
// return ret;
// break;
break;
}
/*if(ttCommandsOnly == lTarget->GetTargetType())
{
GetPostBuildCommands(lTarget);
}
else*/
{
l_Rule.AddCommand( _T( "echo Building " ) + kind_of_output + _T( " " ) + l_OutFileName.GetFullPath() );
wxString l_LinkerCmd = l_pCompiler->GetCommand( ct );
Manager::Get()->GetMessageManager()->DebugLog(wxString::Format( _("LinkerCmd: %s"), l_LinkerCmd.c_str()) );
l_pCompiler->GenerateCommandLine( l_LinkerCmd,
p_BuildTarget,
NULL,
l_OutFileName.GetFullPath(),
_T("$$(") + l_TargetName + _T(")"),
wxEmptyString,
wxEmptyString );
l_Rule.AddCommand( l_LinkerCmd );
}
m_Rules.Add( l_Rule );
// Form rules
wxString l_Tmp;
unsigned long ii;
wxString macro;
wxString file;
wxString object;
wxString FlatObject;
wxString deps;
cbMGSortFilesArray files = GetProjectFilesSortedByWeight(p_BuildTarget,true,false);
unsigned long lnb_files = files.GetCount();
for ( ii = 0; ii < lnb_files; ii++ )
{
l_Rule.Clear();
ProjectFile* pf = files[ ii ];
const pfDetails& pfd = pf->GetFileDetails( p_BuildTarget );
wxString l_Object = ( l_pCompiler->GetSwitches().UseFlatObjects )?pfd.object_file_flat:pfd.object_file;
wxString l_CompilerCmd;
// lookup file's type
FileType ft = FileTypeOf( pf->relativeFilename );
bool isResource = ft == ftResource;
bool isHeader = ft == ftHeader;
if ( !isHeader || l_pCompiler->GetSwitches().supportsPCH )
{
pfCustomBuild& pcfb = pf->customBuild[l_pCompiler->GetID()];
l_CompilerCmd = pcfb.useCustomBuildCommand
? pcfb.buildCommand
: l_pCompiler->GetCommand( isResource ? ctCompileResourceCmd : ctCompileObjectCmd );
wxString l_SourceFile;
if ( l_pCompiler->GetSwitches().UseFullSourcePaths )
{
l_SourceFile = UnixFilename( pfd.source_file_absolute_native );
// for resource files, use short from if path because if windres bug with spaces-in-paths
if ( isResource )
{
l_SourceFile = pf->file.GetShortPath();
}
}
else
{
l_SourceFile = pfd.source_file;
}
QuoteStringIfNeeded( l_SourceFile );
Manager::Get()->GetMessageManager()->DebugLog(wxString::Format( _("CompilerCmd: %s"), l_CompilerCmd.c_str()) );
/* FIXME: traps after next command */
l_pCompiler->GenerateCommandLine( l_CompilerCmd,
p_BuildTarget,
pf,
l_SourceFile,
l_Object,
pfd.object_file_flat,
pfd.dep_file );
if ( m_Objs.size() )
{
m_Objs += _T(' ');
}
m_Objs += l_Object;
l_Rule.SetTarget( l_Object );
l_Rule.SetPrerequisites( l_SourceFile );
l_Rule.AddCommand( _T( "echo Compiling: " ) + l_SourceFile );
l_Rule.AddCommand( l_CompilerCmd );
m_Rules.Add( l_Rule );
}
}
for ( unsigned long i=0; i < m_Deps.Count(); i++ )
{
l_Rule.Clear();
l_Rule.SetTarget( m_Deps.GetVarName( i ) );
l_Rule.SetPrerequisites( m_Deps.GetVariable( i ) );
m_Rules.Add( l_Rule );
}
l_Rule.Clear();
l_Rule.SetTarget( cmdphony );
l_Rule.SetPrerequisites( l_CmdClean );
m_Rules.Add( l_Rule );
l_Rule.Clear();
l_Rule.SetTarget( l_CmdClean );
l_Rule.AddCommand( _T( "echo Delete $(" ) + l_ObjsName + _T( ") " ) + l_OutFileName.GetFullPath() );
#ifdef __WXMSW__
l_Rule.AddCommand( _T( "-del /f $(" ) + l_ObjsName + _T( ") " ) + l_OutFileName.GetFullPath() );
#else
l_Rule.AddCommand( _T( "-rm -f $(" ) + l_ObjsName + _T( ") " ) + l_OutFileName.GetFullPath() );
#endif
m_Rules.Add( l_Rule );
if ( !m_VariablesIsSaved )
{
m_Variables.SaveAllVars( p_File );
m_VariablesIsSaved = true;
}
p_File.AddLine( _T("# Target: ") + l_TargetName );
p_File.AddLine( wxEmptyString );
p_File.AddLine( l_ObjsName + _T("=") + m_Objs );
p_File.AddLine( wxEmptyString );
SaveAllRules( p_File );
p_File.AddLine( wxEmptyString );
p_File.AddLine( wxEmptyString );
l_Ret = true;
return l_Ret;
}
void ClangPlugin::OnTimer(wxTimerEvent& event)
{
if (!IsAttached())
return;
const int evId = event.GetId();
if (evId == idEdOpenTimer)
{
cbEditor* ed = Manager::Get()->GetEditorManager()->GetBuiltinActiveEditor();
if (!ed || !IsProviderFor(ed))
return;
else if (m_Proxy.GetTranslationUnitId(ed->GetFilename()) != wxNOT_FOUND)
{
m_DiagnosticTimer.Start(DIAGNOSTIC_DELAY, wxTIMER_ONE_SHOT);
return;
}
wxString compileCommand;
ProjectFile* pf = ed->GetProjectFile();
ProjectBuildTarget* target = nullptr;
Compiler* comp = nullptr;
if (pf && pf->GetParentProject() && !pf->GetBuildTargets().IsEmpty() )
{
target = pf->GetParentProject()->GetBuildTarget(pf->GetBuildTargets()[0]);
comp = CompilerFactory::GetCompiler(target->GetCompilerID());
if (pf->GetUseCustomBuildCommand(target->GetCompilerID()))
{
compileCommand = pf->GetCustomBuildCommand(target->GetCompilerID()).AfterFirst(wxT(' '));
}
}
if (compileCommand.IsEmpty())
compileCommand = wxT("$options $includes");
cbProject* proj = (pf ? pf->GetParentProject() : nullptr);
if (!comp && proj)
comp = CompilerFactory::GetCompiler(proj->GetCompilerID());
if (!comp)
{
cbProject* tmpPrj = Manager::Get()->GetProjectManager()->GetActiveProject();
if (tmpPrj)
comp = CompilerFactory::GetCompiler(tmpPrj->GetCompilerID());
}
if (!comp)
comp = CompilerFactory::GetDefaultCompiler();
comp->GetCommandGenerator(proj)->GenerateCommandLine(compileCommand, target, pf, ed->GetFilename(),
g_InvalidStr, g_InvalidStr, g_InvalidStr );
wxStringTokenizer tokenizer(compileCommand);
compileCommand.Empty();
wxString pathStr;
while (tokenizer.HasMoreTokens())
{
wxString flag = tokenizer.GetNextToken();
// make all include paths absolute, so clang does not choke if Code::Blocks switches directories
if (flag.StartsWith(wxT("-I"), &pathStr))
{
wxFileName path(pathStr);
if (path.Normalize(wxPATH_NORM_ALL & ~wxPATH_NORM_CASE))
flag = wxT("-I") + path.GetFullPath();
}
compileCommand += flag + wxT(" ");
}
compileCommand += GetCompilerInclDirs(comp->GetID());
if (FileTypeOf(ed->GetFilename()) == ftHeader) // try to find the associated source
{
const wxString& source = GetSourceOf(ed);
if (!source.IsEmpty())
{
m_Proxy.CreateTranslationUnit(source, compileCommand);
if (m_Proxy.GetTranslationUnitId(ed->GetFilename()) != wxNOT_FOUND)
return; // got it
}
}
m_Proxy.CreateTranslationUnit(ed->GetFilename(), compileCommand);
m_DiagnosticTimer.Start(DIAGNOSTIC_DELAY, wxTIMER_ONE_SHOT);
}
else if (evId == idReparseTimer)
{
EditorManager* edMgr = Manager::Get()->GetEditorManager();
cbEditor* ed = edMgr->GetBuiltinActiveEditor();
if (!ed)
return;
if (ed != m_pLastEditor)
{
m_TranslUnitId = m_Proxy.GetTranslationUnitId(ed->GetFilename());
m_pLastEditor = ed;
}
if (m_TranslUnitId == wxNOT_FOUND)
return;
std::map<wxString, wxString> unsavedFiles;
for (int i = 0; i < edMgr->GetEditorsCount(); ++i)
{
ed = edMgr->GetBuiltinEditor(i);
if (ed && ed->GetModified())
unsavedFiles.insert(std::make_pair(ed->GetFilename(), ed->GetControl()->GetText()));
}
m_Proxy.Reparse(m_TranslUnitId, unsavedFiles);
DiagnoseEd(m_pLastEditor, dlMinimal);
}
else if (evId == idDiagnosticTimer)
{
cbEditor* ed = Manager::Get()->GetEditorManager()->GetBuiltinActiveEditor();
if (!ed)
return;
if (ed != m_pLastEditor)
{
m_TranslUnitId = m_Proxy.GetTranslationUnitId(ed->GetFilename());
m_pLastEditor = ed;
}
if (m_TranslUnitId == wxNOT_FOUND)
return;
DiagnoseEd(ed, dlFull);
}
else
event.Skip();
}
wxString ClangPlugin::GetSourceOf(cbEditor* ed)
{
cbProject* project = nullptr;
ProjectFile* opf = ed->GetProjectFile();
if (opf)
project = opf->GetParentProject();
if (!project)
project = Manager::Get()->GetProjectManager()->GetActiveProject();
wxFileName theFile(ed->GetFilename());
wxFileName candidateFile;
bool isCandidate;
wxArrayString fileArray;
wxDir::GetAllFiles(theFile.GetPath(wxPATH_GET_VOLUME), &fileArray, theFile.GetName() + wxT(".*"), wxDIR_FILES | wxDIR_HIDDEN);
wxFileName currentCandidateFile = FindSourceIn(fileArray, theFile, isCandidate);
if (isCandidate)
candidateFile = currentCandidateFile;
else if (currentCandidateFile.IsOk())
return currentCandidateFile.GetFullPath();
fileArray.Clear();
EditorManager* edMgr = Manager::Get()->GetEditorManager();
for (int i = 0; i < edMgr->GetEditorsCount(); ++i)
{
cbEditor* edit = edMgr->GetBuiltinEditor(i);
if (!edit)
continue;
ProjectFile* pf = edit->GetProjectFile();
if (!pf)
continue;
fileArray.Add(pf->file.GetFullPath());
}
currentCandidateFile = FindSourceIn(fileArray, theFile, isCandidate);
if (!isCandidate && currentCandidateFile.IsOk())
return currentCandidateFile.GetFullPath();
if (project)
{
fileArray.Clear();
for (FilesList::const_iterator it = project->GetFilesList().begin(); it != project->GetFilesList().end(); ++it)
{
ProjectFile* pf = *it;
if (!pf)
continue;
fileArray.Add(pf->file.GetFullPath());
}
currentCandidateFile = FindSourceIn(fileArray, theFile, isCandidate);
if (isCandidate && !candidateFile.IsOk())
candidateFile = currentCandidateFile;
else if (currentCandidateFile.IsOk())
return currentCandidateFile.GetFullPath();
wxArrayString dirs = project->GetIncludeDirs();
for (int i = 0; i < project->GetBuildTargetsCount(); ++i)
{
ProjectBuildTarget* target = project->GetBuildTarget(i);
if (target)
{
for (size_t ti = 0; ti < target->GetIncludeDirs().GetCount(); ++ti)
{
wxString dir = target->GetIncludeDirs()[ti];
if (dirs.Index(dir) == wxNOT_FOUND)
dirs.Add(dir);
}
}
}
for (size_t i = 0; i < dirs.GetCount(); ++i)
{
wxString dir = dirs[i];
Manager::Get()->GetMacrosManager()->ReplaceMacros(dir);
wxFileName dname(dir);
if (!dname.IsAbsolute())
dname.Normalize(wxPATH_NORM_ALL & ~wxPATH_NORM_CASE, project->GetBasePath());
fileArray.Clear();
wxDir::GetAllFiles(dname.GetPath(), &fileArray, theFile.GetName() + wxT(".*"), wxDIR_FILES | wxDIR_HIDDEN);
currentCandidateFile = FindSourceIn(fileArray, theFile, isCandidate);
if (isCandidate)
candidateFile = currentCandidateFile;
else if (currentCandidateFile.IsOk())
return currentCandidateFile.GetFullPath();
}
}
if (candidateFile.IsOk())
return candidateFile.GetFullPath();
return wxEmptyString;
}