static
void DebugCheckChildSize(nsIFrame*            aChild,
                         ReflowOutput& aMet)
{
  WritingMode wm = aMet.GetWritingMode();
  if ((aMet.ISize(wm) < 0) || (aMet.ISize(wm) > PROBABLY_TOO_LARGE)) {
    printf("WARNING: cell content %p has large inline size %d \n",
           static_cast<void*>(aChild), int32_t(aMet.ISize(wm)));
  }
}
void
nsVideoFrame::Reflow(nsPresContext*           aPresContext,
                     ReflowOutput&     aMetrics,
                     const ReflowInput& aReflowInput,
                     nsReflowStatus&          aStatus)
{
  MarkInReflow();
  DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
  NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
                  ("enter nsVideoFrame::Reflow: availSize=%d,%d",
                  aReflowInput.AvailableWidth(), aReflowInput.AvailableHeight()));

  NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");

  aStatus = NS_FRAME_COMPLETE;

  aMetrics.Width() = aReflowInput.ComputedWidth();
  aMetrics.Height() = aReflowInput.ComputedHeight();

  // stash this away so we can compute our inner area later
  mBorderPadding   = aReflowInput.ComputedPhysicalBorderPadding();

  aMetrics.Width() += mBorderPadding.left + mBorderPadding.right;
  aMetrics.Height() += mBorderPadding.top + mBorderPadding.bottom;

  // Reflow the child frames. We may have up to two, an image frame
  // which is the poster, and a box frame, which is the video controls.
  for (nsIFrame* child : mFrames) {
    if (child->GetContent() == mPosterImage) {
      // Reflow the poster frame.
      nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
      ReflowOutput kidDesiredSize(aReflowInput);
      WritingMode wm = imageFrame->GetWritingMode();
      LogicalSize availableSize = aReflowInput.AvailableSize(wm);
      LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
                             ConvertTo(wm, aMetrics.GetWritingMode());
      ReflowInput kidReflowInput(aPresContext,
                                       aReflowInput,
                                       imageFrame,
                                       availableSize,
                                       &cbSize);

      nsRect posterRenderRect;
      if (ShouldDisplayPoster()) {
        posterRenderRect =
          nsRect(nsPoint(mBorderPadding.left, mBorderPadding.top),
                 nsSize(aReflowInput.ComputedWidth(),
                        aReflowInput.ComputedHeight()));
      }
      kidReflowInput.SetComputedWidth(posterRenderRect.width);
      kidReflowInput.SetComputedHeight(posterRenderRect.height);
      ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
                  posterRenderRect.x, posterRenderRect.y, 0, aStatus);
      FinishReflowChild(imageFrame, aPresContext,
                        kidDesiredSize, &kidReflowInput,
                        posterRenderRect.x, posterRenderRect.y, 0);
    } else if (child->GetContent() == mVideoControls) {
      // Reflow the video controls frame.
      nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
      nsSize size = child->GetSize();
      nsBoxFrame::LayoutChildAt(boxState,
                                child,
                                nsRect(mBorderPadding.left,
                                       mBorderPadding.top,
                                       aReflowInput.ComputedWidth(),
                                       aReflowInput.ComputedHeight()));
      if (child->GetSize() != size) {
        RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
        nsContentUtils::AddScriptRunner(event);
      }
    } else if (child->GetContent() == mCaptionDiv) {
      // Reflow to caption div
      ReflowOutput kidDesiredSize(aReflowInput);
      WritingMode wm = child->GetWritingMode();
      LogicalSize availableSize = aReflowInput.AvailableSize(wm);
      LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
                             ConvertTo(wm, aMetrics.GetWritingMode());
      ReflowInput kidReflowInput(aPresContext,
                                       aReflowInput,
                                       child,
                                       availableSize,
                                       &cbSize);
      nsSize size(aReflowInput.ComputedWidth(), aReflowInput.ComputedHeight());
      size.width -= kidReflowInput.ComputedPhysicalBorderPadding().LeftRight();
      size.height -= kidReflowInput.ComputedPhysicalBorderPadding().TopBottom();

      kidReflowInput.SetComputedWidth(std::max(size.width, 0));
      kidReflowInput.SetComputedHeight(std::max(size.height, 0));

      ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
                  mBorderPadding.left, mBorderPadding.top, 0, aStatus);
      FinishReflowChild(child, aPresContext,
                        kidDesiredSize, &kidReflowInput,
                        mBorderPadding.left, mBorderPadding.top, 0);
    }
  }
  aMetrics.SetOverflowAreasToDesiredBounds();

  FinishAndStoreOverflow(&aMetrics);

  NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
                  ("exit nsVideoFrame::Reflow: size=%d,%d",
                  aMetrics.Width(), aMetrics.Height()));
  NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
/* virtual */ nsresult
nsMathMLmencloseFrame::PlaceInternal(DrawTarget*          aDrawTarget,
                                     bool                 aPlaceOrigin,
                                     ReflowOutput& aDesiredSize,
                                     bool                 aWidthOnly)
{
  ///////////////
  // Measure the size of our content using the base class to format like an
  // inferred mrow.
  ReflowOutput baseSize(aDesiredSize.GetWritingMode());
  nsresult rv =
    nsMathMLContainerFrame::Place(aDrawTarget, false, baseSize);

  if (NS_MATHML_HAS_ERROR(mPresentationData.flags) || NS_FAILED(rv)) {
      DidReflowChildren(PrincipalChildList().FirstChild());
      return rv;
    }

  nsBoundingMetrics bmBase = baseSize.mBoundingMetrics;
  nscoord dx_left = 0, dx_right = 0;
  nsBoundingMetrics bmLongdivChar, bmRadicalChar;
  nscoord radicalAscent = 0, radicalDescent = 0;
  nscoord longdivAscent = 0, longdivDescent = 0;
  nscoord psi = 0;
  nscoord leading = 0;

  ///////////////
  // Thickness of bars and font metrics
  nscoord onePixel = nsPresContext::CSSPixelsToAppUnits(1);

  float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
  RefPtr<nsFontMetrics> fm =
    nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);
  GetRuleThickness(aDrawTarget, fm, mRuleThickness);
  if (mRuleThickness < onePixel) {
    mRuleThickness = onePixel;
  }

  char16_t one = '1';
  nsBoundingMetrics bmOne =
    nsLayoutUtils::AppUnitBoundsOfString(&one, 1, *fm, aDrawTarget);

  ///////////////
  // General rules: the menclose element takes the size of the enclosed content.
  // We add a padding when needed.

  // determine padding & psi
  nscoord padding = 3 * mRuleThickness;
  nscoord delta = padding % onePixel;
  if (delta)
    padding += onePixel - delta; // round up

  if (IsToDraw(NOTATION_LONGDIV) || IsToDraw(NOTATION_RADICAL)) {
    GetRadicalParameters(fm, StyleFont()->mMathDisplay ==
                         NS_MATHML_DISPLAYSTYLE_BLOCK,
                         mRadicalRuleThickness, leading, psi);

    // make sure that the rule appears on on screen
    if (mRadicalRuleThickness < onePixel) {
      mRadicalRuleThickness = onePixel;
    }

    // adjust clearance psi to get an exact number of pixels -- this
    // gives a nicer & uniform look on stacked radicals (bug 130282)
    delta = psi % onePixel;
    if (delta) {
      psi += onePixel - delta; // round up
    }
  }

  // Set horizontal parameters
  if (IsToDraw(NOTATION_ROUNDEDBOX) ||
      IsToDraw(NOTATION_TOP) ||
      IsToDraw(NOTATION_LEFT) ||
      IsToDraw(NOTATION_BOTTOM) ||
      IsToDraw(NOTATION_CIRCLE))
    dx_left = padding;

  if (IsToDraw(NOTATION_ROUNDEDBOX) ||
      IsToDraw(NOTATION_TOP) ||
      IsToDraw(NOTATION_RIGHT) ||
      IsToDraw(NOTATION_BOTTOM) ||
      IsToDraw(NOTATION_CIRCLE))
    dx_right = padding;

  // Set vertical parameters
  if (IsToDraw(NOTATION_RIGHT) ||
      IsToDraw(NOTATION_LEFT) ||
      IsToDraw(NOTATION_UPDIAGONALSTRIKE) ||
      IsToDraw(NOTATION_UPDIAGONALARROW) ||
      IsToDraw(NOTATION_DOWNDIAGONALSTRIKE) ||
      IsToDraw(NOTATION_VERTICALSTRIKE) ||
      IsToDraw(NOTATION_CIRCLE) ||
      IsToDraw(NOTATION_ROUNDEDBOX) ||
      IsToDraw(NOTATION_RADICAL) ||
      IsToDraw(NOTATION_LONGDIV) ||
      IsToDraw(NOTATION_PHASORANGLE)) {
      // set a minimal value for the base height
      bmBase.ascent = std::max(bmOne.ascent, bmBase.ascent);
      bmBase.descent = std::max(0, bmBase.descent);
  }

  mBoundingMetrics.ascent = bmBase.ascent;
  mBoundingMetrics.descent = bmBase.descent;
    
  if (IsToDraw(NOTATION_ROUNDEDBOX) ||
      IsToDraw(NOTATION_TOP) ||
      IsToDraw(NOTATION_LEFT) ||
      IsToDraw(NOTATION_RIGHT) ||
      IsToDraw(NOTATION_CIRCLE))
    mBoundingMetrics.ascent += padding;
  
  if (IsToDraw(NOTATION_ROUNDEDBOX) ||
      IsToDraw(NOTATION_LEFT) ||
      IsToDraw(NOTATION_RIGHT) ||
      IsToDraw(NOTATION_BOTTOM) ||
      IsToDraw(NOTATION_CIRCLE))
    mBoundingMetrics.descent += padding;

   ///////////////
   // phasorangle notation
  if (IsToDraw(NOTATION_PHASORANGLE)) {
    nscoord phasorangleWidth = kPhasorangleWidth * mRuleThickness;
    // Update horizontal parameters
    dx_left = std::max(dx_left, phasorangleWidth);
  }

  ///////////////
  // updiagonal arrow notation. We need enough space at the top right corner to
  // draw the arrow head.
  if (IsToDraw(NOTATION_UPDIAGONALARROW)) {
    // This is an estimate, see nsDisplayNotation::Paint for the exact head size
    nscoord arrowHeadSize = kArrowHeadSize * mRuleThickness;

    // We want that the arrow shaft strikes the menclose content and that the
    // arrow head does not overlap with that content. Hence we add some space
    // on the right. We don't add space on the top but only ensure that the
    // ascent is large enough.
    dx_right = std::max(dx_right, arrowHeadSize);
    mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent, arrowHeadSize);
  }

  ///////////////
  // circle notation: we don't want the ellipse to overlap the enclosed
  // content. Hence, we need to increase the size of the bounding box by a
  // factor of at least sqrt(2).
  if (IsToDraw(NOTATION_CIRCLE)) {
    double ratio = (sqrt(2.0) - 1.0) / 2.0;
    nscoord padding2;

    // Update horizontal parameters
    padding2 = ratio * bmBase.width;

    dx_left = std::max(dx_left, padding2);
    dx_right = std::max(dx_right, padding2);

    // Update vertical parameters
    padding2 = ratio * (bmBase.ascent + bmBase.descent);

    mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent,
                                     bmBase.ascent + padding2);
    mBoundingMetrics.descent = std::max(mBoundingMetrics.descent,
                                      bmBase.descent + padding2);
  }

  ///////////////
  // longdiv notation:
  if (IsToDraw(NOTATION_LONGDIV)) {
    if (aWidthOnly) {
        nscoord longdiv_width = mMathMLChar[mLongDivCharIndex].
          GetMaxWidth(PresContext(), aDrawTarget, fontSizeInflation);

        // Update horizontal parameters
        dx_left = std::max(dx_left, longdiv_width);
    } else {
      // Stretch the parenthesis to the appropriate height if it is not
      // big enough.
      nsBoundingMetrics contSize = bmBase;
      contSize.ascent = mRuleThickness;
      contSize.descent = bmBase.ascent + bmBase.descent + psi;

      // height(longdiv) should be >= height(base) + psi + mRuleThickness
      mMathMLChar[mLongDivCharIndex].Stretch(PresContext(), aDrawTarget,
                                             fontSizeInflation,
                                             NS_STRETCH_DIRECTION_VERTICAL,
                                             contSize, bmLongdivChar,
                                             NS_STRETCH_LARGER, false);
      mMathMLChar[mLongDivCharIndex].GetBoundingMetrics(bmLongdivChar);

      // Update horizontal parameters
      dx_left = std::max(dx_left, bmLongdivChar.width);

      // Update vertical parameters
      longdivAscent = bmBase.ascent + psi + mRuleThickness;
      longdivDescent = std::max(bmBase.descent,
                              (bmLongdivChar.ascent + bmLongdivChar.descent -
                               longdivAscent));

      mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent,
                                       longdivAscent);
      mBoundingMetrics.descent = std::max(mBoundingMetrics.descent,
                                        longdivDescent);
    }
  }

  ///////////////
  // radical notation:
  if (IsToDraw(NOTATION_RADICAL)) {
    nscoord *dx_leading = StyleVisibility()->mDirection ? &dx_right : &dx_left;
    
    if (aWidthOnly) {
      nscoord radical_width = mMathMLChar[mRadicalCharIndex].
        GetMaxWidth(PresContext(), aDrawTarget, fontSizeInflation);
      
      // Update horizontal parameters
      *dx_leading = std::max(*dx_leading, radical_width);
    } else {
      // Stretch the radical symbol to the appropriate height if it is not
      // big enough.
      nsBoundingMetrics contSize = bmBase;
      contSize.ascent = mRadicalRuleThickness;
      contSize.descent = bmBase.ascent + bmBase.descent + psi;

      // height(radical) should be >= height(base) + psi + mRadicalRuleThickness
      mMathMLChar[mRadicalCharIndex].Stretch(PresContext(), aDrawTarget,
                                             fontSizeInflation,
                                             NS_STRETCH_DIRECTION_VERTICAL,
                                             contSize, bmRadicalChar,
                                             NS_STRETCH_LARGER,
                                             StyleVisibility()->mDirection);
      mMathMLChar[mRadicalCharIndex].GetBoundingMetrics(bmRadicalChar);

      // Update horizontal parameters
      *dx_leading = std::max(*dx_leading, bmRadicalChar.width);

      // Update vertical parameters
      radicalAscent = bmBase.ascent + psi + mRadicalRuleThickness;
      radicalDescent = std::max(bmBase.descent,
                              (bmRadicalChar.ascent + bmRadicalChar.descent -
                               radicalAscent));

      mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent,
                                       radicalAscent);
      mBoundingMetrics.descent = std::max(mBoundingMetrics.descent,
                                        radicalDescent);
    }
  }

  ///////////////
  //
  if (IsToDraw(NOTATION_CIRCLE) ||
      IsToDraw(NOTATION_ROUNDEDBOX) ||
      (IsToDraw(NOTATION_LEFT) && IsToDraw(NOTATION_RIGHT))) {
    // center the menclose around the content (horizontally)
    dx_left = dx_right = std::max(dx_left, dx_right);
  }

  ///////////////
  // The maximum size is now computed: set the remaining parameters
  mBoundingMetrics.width = dx_left + bmBase.width + dx_right;

  mBoundingMetrics.leftBearing = std::min(0, dx_left + bmBase.leftBearing);
  mBoundingMetrics.rightBearing =
    std::max(mBoundingMetrics.width, dx_left + bmBase.rightBearing);
  
  aDesiredSize.Width() = mBoundingMetrics.width;

  aDesiredSize.SetBlockStartAscent(std::max(mBoundingMetrics.ascent,
                                            baseSize.BlockStartAscent()));
  aDesiredSize.Height() = aDesiredSize.BlockStartAscent() +
    std::max(mBoundingMetrics.descent,
             baseSize.Height() - baseSize.BlockStartAscent());

  if (IsToDraw(NOTATION_LONGDIV) || IsToDraw(NOTATION_RADICAL)) {
    nscoord desiredSizeAscent = aDesiredSize.BlockStartAscent();
    nscoord desiredSizeDescent = aDesiredSize.Height() -
                                 aDesiredSize.BlockStartAscent();
    
    if (IsToDraw(NOTATION_LONGDIV)) {
      desiredSizeAscent = std::max(desiredSizeAscent,
                                 longdivAscent + leading);
      desiredSizeDescent = std::max(desiredSizeDescent,
                                  longdivDescent + mRuleThickness);
    }
    
    if (IsToDraw(NOTATION_RADICAL)) {
      desiredSizeAscent = std::max(desiredSizeAscent,
                                 radicalAscent + leading);
      desiredSizeDescent = std::max(desiredSizeDescent,
                                    radicalDescent + mRadicalRuleThickness);
    }

    aDesiredSize.SetBlockStartAscent(desiredSizeAscent);
    aDesiredSize.Height() = desiredSizeAscent + desiredSizeDescent;
  }
    
  if (IsToDraw(NOTATION_CIRCLE) ||
      IsToDraw(NOTATION_ROUNDEDBOX) ||
      (IsToDraw(NOTATION_TOP) && IsToDraw(NOTATION_BOTTOM))) {
    // center the menclose around the content (vertically)
    nscoord dy = std::max(aDesiredSize.BlockStartAscent() - bmBase.ascent,
                          aDesiredSize.Height() -
                          aDesiredSize.BlockStartAscent() - bmBase.descent);

    aDesiredSize.SetBlockStartAscent(bmBase.ascent + dy);
    aDesiredSize.Height() = aDesiredSize.BlockStartAscent() + bmBase.descent + dy;
  }

  // Update mBoundingMetrics ascent/descent
  if (IsToDraw(NOTATION_TOP) ||
      IsToDraw(NOTATION_RIGHT) ||
      IsToDraw(NOTATION_LEFT) ||
      IsToDraw(NOTATION_UPDIAGONALSTRIKE) ||
      IsToDraw(NOTATION_UPDIAGONALARROW) ||
      IsToDraw(NOTATION_DOWNDIAGONALSTRIKE) ||
      IsToDraw(NOTATION_VERTICALSTRIKE) ||
      IsToDraw(NOTATION_CIRCLE) ||
      IsToDraw(NOTATION_ROUNDEDBOX))
    mBoundingMetrics.ascent = aDesiredSize.BlockStartAscent();
  
  if (IsToDraw(NOTATION_BOTTOM) ||
      IsToDraw(NOTATION_RIGHT) ||
      IsToDraw(NOTATION_LEFT) ||
      IsToDraw(NOTATION_UPDIAGONALSTRIKE) ||
      IsToDraw(NOTATION_UPDIAGONALARROW) ||
      IsToDraw(NOTATION_DOWNDIAGONALSTRIKE) ||
      IsToDraw(NOTATION_VERTICALSTRIKE) ||
      IsToDraw(NOTATION_CIRCLE) ||
      IsToDraw(NOTATION_ROUNDEDBOX))
    mBoundingMetrics.descent = aDesiredSize.Height() - aDesiredSize.BlockStartAscent();

  // phasorangle notation:
  // move up from the bottom by the angled line height
  if (IsToDraw(NOTATION_PHASORANGLE))
    mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent, 2 * kPhasorangleWidth * mRuleThickness - mBoundingMetrics.descent);
  
  aDesiredSize.mBoundingMetrics = mBoundingMetrics;
  
  mReference.x = 0;
  mReference.y = aDesiredSize.BlockStartAscent();

  if (aPlaceOrigin) {
    //////////////////
    // Set position and size of MathMLChars
    if (IsToDraw(NOTATION_LONGDIV))
      mMathMLChar[mLongDivCharIndex].SetRect(nsRect(dx_left -
                                                    bmLongdivChar.width,
                                                    aDesiredSize.BlockStartAscent() -
                                                    longdivAscent,
                                                    bmLongdivChar.width,
                                                    bmLongdivChar.ascent +
                                                    bmLongdivChar.descent));

    if (IsToDraw(NOTATION_RADICAL)) {
      nscoord dx = (StyleVisibility()->mDirection ?
                    dx_left + bmBase.width : dx_left - bmRadicalChar.width);

      mMathMLChar[mRadicalCharIndex].SetRect(nsRect(dx,
                                                    aDesiredSize.BlockStartAscent() -
                                                    radicalAscent,
                                                    bmRadicalChar.width,
                                                    bmRadicalChar.ascent +
                                                    bmRadicalChar.descent));
    }

    mContentWidth = bmBase.width;

    //////////////////
    // Finish reflowing child frames
    PositionRowChildFrames(dx_left, aDesiredSize.BlockStartAscent());
  }

  return NS_OK;
}
Exemple #4
0
void
nsFirstLetterFrame::Reflow(nsPresContext*          aPresContext,
                           ReflowOutput&     aMetrics,
                           const ReflowInput& aReflowInput,
                           nsReflowStatus&          aReflowStatus)
{
  MarkInReflow();
  DO_GLOBAL_REFLOW_COUNT("nsFirstLetterFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aReflowStatus);

  // Grab overflow list
  DrainOverflowFrames(aPresContext);

  nsIFrame* kid = mFrames.FirstChild();

  // Setup reflow state for our child
  WritingMode wm = aReflowInput.GetWritingMode();
  LogicalSize availSize = aReflowInput.AvailableSize();
  const LogicalMargin& bp = aReflowInput.ComputedLogicalBorderPadding();
  NS_ASSERTION(availSize.ISize(wm) != NS_UNCONSTRAINEDSIZE,
               "should no longer use unconstrained inline size");
  availSize.ISize(wm) -= bp.IStartEnd(wm);
  if (NS_UNCONSTRAINEDSIZE != availSize.BSize(wm)) {
    availSize.BSize(wm) -= bp.BStartEnd(wm);
  }

  WritingMode lineWM = aMetrics.GetWritingMode();
  ReflowOutput kidMetrics(lineWM);

  // Reflow the child
  if (!aReflowInput.mLineLayout) {
    // When there is no lineLayout provided, we provide our own. The
    // only time that the first-letter-frame is not reflowing in a
    // line context is when its floating.
    WritingMode kidWritingMode = WritingModeForLine(wm, kid);
    LogicalSize kidAvailSize = availSize.ConvertTo(kidWritingMode, wm);
    ReflowInput rs(aPresContext, aReflowInput, kid, kidAvailSize);
    nsLineLayout ll(aPresContext, nullptr, &aReflowInput, nullptr, nullptr);

    ll.BeginLineReflow(bp.IStart(wm), bp.BStart(wm),
                       availSize.ISize(wm), NS_UNCONSTRAINEDSIZE,
                       false, true, kidWritingMode,
                       nsSize(aReflowInput.AvailableWidth(),
                              aReflowInput.AvailableHeight()));
    rs.mLineLayout = &ll;
    ll.SetInFirstLetter(true);
    ll.SetFirstLetterStyleOK(true);

    kid->Reflow(aPresContext, kidMetrics, rs, aReflowStatus);

    ll.EndLineReflow();
    ll.SetInFirstLetter(false);

    // In the floating first-letter case, we need to set this ourselves;
    // nsLineLayout::BeginSpan will set it in the other case
    mBaseline = kidMetrics.BlockStartAscent();

    // Place and size the child and update the output metrics
    LogicalSize convertedSize = kidMetrics.Size(lineWM).ConvertTo(wm, lineWM);
    kid->SetRect(nsRect(bp.IStart(wm), bp.BStart(wm),
                        convertedSize.ISize(wm), convertedSize.BSize(wm)));
    kid->FinishAndStoreOverflow(&kidMetrics);
    kid->DidReflow(aPresContext, nullptr, nsDidReflowStatus::FINISHED);

    convertedSize.ISize(wm) += bp.IStartEnd(wm);
    convertedSize.BSize(wm) += bp.BStartEnd(wm);
    aMetrics.SetSize(wm, convertedSize);
    aMetrics.SetBlockStartAscent(kidMetrics.BlockStartAscent() +
                                 bp.BStart(wm));

    // Ensure that the overflow rect contains the child textframe's
    // overflow rect.
    // Note that if this is floating, the overline/underline drawable
    // area is in the overflow rect of the child textframe.
    aMetrics.UnionOverflowAreasWithDesiredBounds();
    ConsiderChildOverflow(aMetrics.mOverflowAreas, kid);

    FinishAndStoreOverflow(&aMetrics);
  } else {
    // Pretend we are a span and reflow the child frame
    nsLineLayout* ll = aReflowInput.mLineLayout;
    bool          pushedFrame;

    ll->SetInFirstLetter(
      mStyleContext->GetPseudo() == nsCSSPseudoElements::firstLetter);
    ll->BeginSpan(this, &aReflowInput, bp.IStart(wm),
                  availSize.ISize(wm), &mBaseline);
    ll->ReflowFrame(kid, aReflowStatus, &kidMetrics, pushedFrame);
    NS_ASSERTION(lineWM.IsVertical() == wm.IsVertical(),
                 "we're assuming we can mix sizes between lineWM and wm "
                 "since we shouldn't have orthogonal writing modes within "
                 "a line.");
    aMetrics.ISize(lineWM) = ll->EndSpan(this) + bp.IStartEnd(wm);
    ll->SetInFirstLetter(false);

    if (mStyleContext->StyleTextReset()->mInitialLetterSize != 0.0f) {
      aMetrics.SetBlockStartAscent(kidMetrics.BlockStartAscent() +
                                   bp.BStart(wm));
      aMetrics.BSize(lineWM) = kidMetrics.BSize(lineWM) + bp.BStartEnd(wm);
    } else {
      nsLayoutUtils::SetBSizeFromFontMetrics(this, aMetrics, bp, lineWM, wm);
    }
  }

  if (!NS_INLINE_IS_BREAK_BEFORE(aReflowStatus)) {
    // Create a continuation or remove existing continuations based on
    // the reflow completion status.
    if (NS_FRAME_IS_COMPLETE(aReflowStatus)) {
      if (aReflowInput.mLineLayout) {
        aReflowInput.mLineLayout->SetFirstLetterStyleOK(false);
      }
      nsIFrame* kidNextInFlow = kid->GetNextInFlow();
      if (kidNextInFlow) {
        // Remove all of the childs next-in-flows
        kidNextInFlow->GetParent()->DeleteNextInFlowChild(kidNextInFlow, true);
      }
    } else {
      // Create a continuation for the child frame if it doesn't already
      // have one.
      if (!IsFloating()) {
        CreateNextInFlow(kid);
        // And then push it to our overflow list
        const nsFrameList& overflow = mFrames.RemoveFramesAfter(kid);
        if (overflow.NotEmpty()) {
          SetOverflowFrames(overflow);
        }
      } else if (!kid->GetNextInFlow()) {
        // For floating first letter frames (if a continuation wasn't already
        // created for us) we need to put the continuation with the rest of the
        // text that the first letter frame was made out of.
        nsIFrame* continuation;
        CreateContinuationForFloatingParent(aPresContext, kid,
                                            &continuation, true);
      }
    }
  }

  NS_FRAME_SET_TRUNCATION(aReflowStatus, aReflowInput, aMetrics);
}
/* virtual */ nsresult
nsMathMLmunderoverFrame::Place(DrawTarget*          aDrawTarget,
                               bool                 aPlaceOrigin,
                               ReflowOutput& aDesiredSize)
{
  float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
  if (NS_MATHML_EMBELLISH_IS_MOVABLELIMITS(mEmbellishData.flags) &&
      StyleFont()->mMathDisplay == NS_MATHML_DISPLAYSTYLE_INLINE) {
    //place like sub sup or subsup
    if (mContent->IsMathMLElement(nsGkAtoms::munderover_)) {
      return nsMathMLmmultiscriptsFrame::PlaceMultiScript(PresContext(),
                                                          aDrawTarget,
                                                          aPlaceOrigin,
                                                          aDesiredSize,
                                                          this, 0, 0,
                                                          fontSizeInflation);
    } else if (mContent->IsMathMLElement( nsGkAtoms::munder_)) {
      return nsMathMLmmultiscriptsFrame::PlaceMultiScript(PresContext(),
                                                          aDrawTarget,
                                                          aPlaceOrigin,
                                                          aDesiredSize,
                                                          this, 0, 0,
                                                          fontSizeInflation);
    } else {
      NS_ASSERTION(mContent->IsMathMLElement(nsGkAtoms::mover_),
                   "mContent->NodeInfo()->NameAtom() not recognized");
      return nsMathMLmmultiscriptsFrame::PlaceMultiScript(PresContext(),
                                                          aDrawTarget,
                                                          aPlaceOrigin,
                                                          aDesiredSize,
                                                          this, 0, 0,
                                                          fontSizeInflation);
    }
    
  }

  ////////////////////////////////////
  // Get the children's desired sizes

  nsBoundingMetrics bmBase, bmUnder, bmOver;
  ReflowOutput baseSize(aDesiredSize.GetWritingMode());
  ReflowOutput underSize(aDesiredSize.GetWritingMode());
  ReflowOutput overSize(aDesiredSize.GetWritingMode());
  nsIFrame* overFrame = nullptr;
  nsIFrame* underFrame = nullptr;
  nsIFrame* baseFrame = mFrames.FirstChild();
  underSize.SetBlockStartAscent(0);
  overSize.SetBlockStartAscent(0);
  bool haveError = false;
  if (baseFrame) {
    if (mContent->IsAnyOfMathMLElements(nsGkAtoms::munder_,
                                        nsGkAtoms::munderover_)) {
      underFrame = baseFrame->GetNextSibling();
    } else if (mContent->IsMathMLElement(nsGkAtoms::mover_)) {
      overFrame = baseFrame->GetNextSibling();
    }
  }
  if (underFrame && mContent->IsMathMLElement(nsGkAtoms::munderover_)) {
    overFrame = underFrame->GetNextSibling();
  }
  
  if (mContent->IsMathMLElement(nsGkAtoms::munder_)) {
    if (!baseFrame || !underFrame || underFrame->GetNextSibling()) {
      // report an error, encourage people to get their markups in order
      haveError = true;
    }
  }
  if (mContent->IsMathMLElement(nsGkAtoms::mover_)) {
    if (!baseFrame || !overFrame || overFrame->GetNextSibling()) {
      // report an error, encourage people to get their markups in order
      haveError = true;
    }
  }
  if (mContent->IsMathMLElement(nsGkAtoms::munderover_)) {
    if (!baseFrame || !underFrame || !overFrame || overFrame->GetNextSibling()) {
      // report an error, encourage people to get their markups in order
      haveError = true;
    }
  }
  if (haveError) {
    if (aPlaceOrigin) {
      ReportChildCountError();
    }
    return ReflowError(aDrawTarget, aDesiredSize);
  }
  GetReflowAndBoundingMetricsFor(baseFrame, baseSize, bmBase);
  if (underFrame) {
    GetReflowAndBoundingMetricsFor(underFrame, underSize, bmUnder);
  }
  if (overFrame) {
    GetReflowAndBoundingMetricsFor(overFrame, overSize, bmOver);
  }

  nscoord onePixel = nsPresContext::CSSPixelsToAppUnits(1);

  ////////////////////
  // Place Children

  RefPtr<nsFontMetrics> fm =
    nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);

  nscoord xHeight = fm->XHeight();
  nscoord oneDevPixel = fm->AppUnitsPerDevPixel();
  gfxFont* mathFont = fm->GetThebesFontGroup()->GetFirstMathFont();

  nscoord ruleThickness;
  GetRuleThickness (aDrawTarget, fm, ruleThickness);

  nscoord correction = 0;
  GetItalicCorrection (bmBase, correction);

  // there are 2 different types of placement depending on 
  // whether we want an accented under or not

  nscoord underDelta1 = 0; // gap between base and underscript
  nscoord underDelta2 = 0; // extra space beneath underscript

  if (!NS_MATHML_EMBELLISH_IS_ACCENTUNDER(mEmbellishData.flags)) {
    // Rule 13a, App. G, TeXbook
    nscoord bigOpSpacing2, bigOpSpacing4, bigOpSpacing5, dummy; 
    GetBigOpSpacings (fm, 
                      dummy, bigOpSpacing2, 
                      dummy, bigOpSpacing4, 
                      bigOpSpacing5);
    if (mathFont) {
      // XXXfredw The Open Type MATH table has some StretchStack* parameters
      // that we may use when the base is a stretchy horizontal operator. See
      // bug 963131.
      bigOpSpacing2 =
        mathFont->GetMathConstant(gfxFontEntry::LowerLimitGapMin,
                                  oneDevPixel);
      bigOpSpacing4 =
        mathFont->GetMathConstant(gfxFontEntry::LowerLimitBaselineDropMin,
                                  oneDevPixel);
      bigOpSpacing5 = 0;
    }
    underDelta1 = std::max(bigOpSpacing2, (bigOpSpacing4 - bmUnder.ascent));
    underDelta2 = bigOpSpacing5;
  }
  else {
    // No corresponding rule in TeXbook - we are on our own here
    // XXX tune the gap delta between base and underscript 
    // XXX Should we use Rule 10 like \underline does?
    // XXXfredw Perhaps use the Underbar* parameters of the MATH table. See
    // bug 963125.
    underDelta1 = ruleThickness + onePixel/2;
    underDelta2 = ruleThickness;
  }
  // empty under?
  if (!(bmUnder.ascent + bmUnder.descent)) {
    underDelta1 = 0;
    underDelta2 = 0;
  }

  nscoord overDelta1 = 0; // gap between base and overscript
  nscoord overDelta2 = 0; // extra space above overscript

  if (!NS_MATHML_EMBELLISH_IS_ACCENTOVER(mEmbellishData.flags)) {    
    // Rule 13a, App. G, TeXbook
    // XXXfredw The Open Type MATH table has some StretchStack* parameters
    // that we may use when the base is a stretchy horizontal operator. See
    // bug 963131.
    nscoord bigOpSpacing1, bigOpSpacing3, bigOpSpacing5, dummy; 
    GetBigOpSpacings (fm, 
                      bigOpSpacing1, dummy, 
                      bigOpSpacing3, dummy, 
                      bigOpSpacing5);
    if (mathFont) {
      // XXXfredw The Open Type MATH table has some StretchStack* parameters
      // that we may use when the base is a stretchy horizontal operator. See
      // bug 963131.
      bigOpSpacing1 =
        mathFont->GetMathConstant(gfxFontEntry::UpperLimitGapMin,
                                  oneDevPixel);
      bigOpSpacing3 =
        mathFont->GetMathConstant(gfxFontEntry::UpperLimitBaselineRiseMin,
                                  oneDevPixel);
      bigOpSpacing5 = 0;
    }
    overDelta1 = std::max(bigOpSpacing1, (bigOpSpacing3 - bmOver.descent));
    overDelta2 = bigOpSpacing5;

    // XXX This is not a TeX rule... 
    // delta1 (as computed abvove) can become really big when bmOver.descent is
    // negative,  e.g., if the content is &OverBar. In such case, we use the height
    if (bmOver.descent < 0)    
      overDelta1 = std::max(bigOpSpacing1, (bigOpSpacing3 - (bmOver.ascent + bmOver.descent)));
  }
  else {
    // Rule 12, App. G, TeXbook
    // We are going to modify this rule to make it more general.
    // The idea behind Rule 12 in the TeXBook is to keep the accent
    // as close to the base as possible, while ensuring that the
    // distance between the *baseline* of the accent char and 
    // the *baseline* of the base is atleast x-height. 
    // The idea is that for normal use, we would like all the accents
    // on a line to line up atleast x-height above the baseline 
    // if possible. 
    // When the ascent of the base is >= x-height, 
    // the baseline of the accent char is placed just above the base
    // (specifically, the baseline of the accent char is placed 
    // above the baseline of the base by the ascent of the base).
    // For ease of implementation, 
    // this assumes that the font-designer designs accents 
    // in such a way that the bottom of the accent is atleast x-height
    // above its baseline, otherwise there will be collisions
    // with the base. Also there should be proper padding between
    // the bottom of the accent char and its baseline.
    // The above rule may not be obvious from a first
    // reading of rule 12 in the TeXBook !!!
    // The mathml <mover> tag can use accent chars that
    // do not follow this convention. So we modify TeX's rule 
    // so that TeX's rule gets subsumed for accents that follow 
    // TeX's convention,
    // while also allowing accents that do not follow the convention :
    // we try to keep the *bottom* of the accent char atleast x-height 
    // from the baseline of the base char. we also slap on an extra
    // padding between the accent and base chars.
    overDelta1 = ruleThickness + onePixel/2;
    nscoord accentBaseHeight = xHeight;
    if (mathFont) {
      accentBaseHeight =
        mathFont->GetMathConstant(gfxFontEntry::AccentBaseHeight,
                                  oneDevPixel);
    }
    if (bmBase.ascent < accentBaseHeight) {
      // also ensure at least accentBaseHeight above the baseline of the base
      overDelta1 += accentBaseHeight - bmBase.ascent;
    }
    overDelta2 = ruleThickness;
  }
  // empty over?
  if (!(bmOver.ascent + bmOver.descent)) {
    overDelta1 = 0;
    overDelta2 = 0;
  }

  nscoord dxBase = 0, dxOver = 0, dxUnder = 0;
  nsAutoString valueAlign;
  enum {
    center,
    left,
    right
  } alignPosition = center;

  if (mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::align, valueAlign)) {
    if (valueAlign.EqualsLiteral("left")) {
      alignPosition = left;
    } else if (valueAlign.EqualsLiteral("right")) {
      alignPosition = right;
    }
  }

  //////////
  // pass 1, do what <mover> does: attach the overscript on the base

  // Ad-hoc - This is to override fonts which have ready-made _accent_
  // glyphs with negative lbearing and rbearing. We want to position
  // the overscript ourselves
  nscoord overWidth = bmOver.width;
  if (!overWidth && (bmOver.rightBearing - bmOver.leftBearing > 0)) {
    overWidth = bmOver.rightBearing - bmOver.leftBearing;
    dxOver = -bmOver.leftBearing;
  }

  if (NS_MATHML_EMBELLISH_IS_ACCENTOVER(mEmbellishData.flags)) {
    mBoundingMetrics.width = bmBase.width; 
    if (alignPosition == center) {
      dxOver += correction;
    }
  }
  else {
    mBoundingMetrics.width = std::max(bmBase.width, overWidth);
    if (alignPosition == center) {
      dxOver += correction/2;
    }
  }
  
  if (alignPosition == center) {
    dxOver += (mBoundingMetrics.width - overWidth)/2;
    dxBase = (mBoundingMetrics.width - bmBase.width)/2;
  } else if (alignPosition == right) {
    dxOver += mBoundingMetrics.width - overWidth;
    dxBase = mBoundingMetrics.width - bmBase.width;
  }

  mBoundingMetrics.ascent = 
    bmBase.ascent + overDelta1 + bmOver.ascent + bmOver.descent;
  mBoundingMetrics.descent = bmBase.descent;
  mBoundingMetrics.leftBearing = 
    std::min(dxBase + bmBase.leftBearing, dxOver + bmOver.leftBearing);
  mBoundingMetrics.rightBearing = 
    std::max(dxBase + bmBase.rightBearing, dxOver + bmOver.rightBearing);

  //////////
  // pass 2, do what <munder> does: attach the underscript on the previous
  // result. We conceptually view the previous result as an "anynomous base" 
  // from where to attach the underscript. Hence if the underscript is empty,
  // we should end up like <mover>. If the overscript is empty, we should
  // end up like <munder>.

  nsBoundingMetrics bmAnonymousBase = mBoundingMetrics;
  nscoord ascentAnonymousBase =
    std::max(mBoundingMetrics.ascent + overDelta2,
             overSize.BlockStartAscent() + bmOver.descent +
             overDelta1 + bmBase.ascent);
  ascentAnonymousBase = std::max(ascentAnonymousBase,
                                 baseSize.BlockStartAscent());

  // Width of non-spacing marks is zero so use left and right bearing.
  nscoord underWidth = bmUnder.width;
  if (!underWidth) {
    underWidth = bmUnder.rightBearing - bmUnder.leftBearing;
    dxUnder = -bmUnder.leftBearing;
  }

  nscoord maxWidth = std::max(bmAnonymousBase.width, underWidth);
  if (alignPosition == center &&
      !NS_MATHML_EMBELLISH_IS_ACCENTUNDER(mEmbellishData.flags)) {
    GetItalicCorrection(bmAnonymousBase, correction);
    dxUnder += -correction/2;
  }
  nscoord dxAnonymousBase = 0;
  if (alignPosition == center) {
    dxUnder += (maxWidth - underWidth)/2;
    dxAnonymousBase = (maxWidth - bmAnonymousBase.width)/2;
  } else if (alignPosition == right) {
    dxUnder += maxWidth - underWidth;
    dxAnonymousBase = maxWidth - bmAnonymousBase.width;
  }

  // adjust the offsets of the real base and overscript since their
  // final offsets should be relative to us...
  dxOver += dxAnonymousBase;
  dxBase += dxAnonymousBase;

  mBoundingMetrics.width =
    std::max(dxAnonymousBase + bmAnonymousBase.width, dxUnder + bmUnder.width);
  // At this point, mBoundingMetrics.ascent = bmAnonymousBase.ascent 
  mBoundingMetrics.descent = 
    bmAnonymousBase.descent + underDelta1 + bmUnder.ascent + bmUnder.descent;
  mBoundingMetrics.leftBearing =
    std::min(dxAnonymousBase + bmAnonymousBase.leftBearing, dxUnder + bmUnder.leftBearing);
  mBoundingMetrics.rightBearing = 
    std::max(dxAnonymousBase + bmAnonymousBase.rightBearing, dxUnder + bmUnder.rightBearing);

  aDesiredSize.SetBlockStartAscent(ascentAnonymousBase);
  aDesiredSize.Height() = aDesiredSize.BlockStartAscent() +
    std::max(mBoundingMetrics.descent + underDelta2,
           bmAnonymousBase.descent + underDelta1 + bmUnder.ascent +
             underSize.Height() - underSize.BlockStartAscent());
  aDesiredSize.Height() = std::max(aDesiredSize.Height(),
                               aDesiredSize.BlockStartAscent() +
                               baseSize.Height() - baseSize.BlockStartAscent());
  aDesiredSize.Width() = mBoundingMetrics.width;
  aDesiredSize.mBoundingMetrics = mBoundingMetrics;

  mReference.x = 0;
  mReference.y = aDesiredSize.BlockStartAscent();

  if (aPlaceOrigin) {
    nscoord dy;
    // place overscript
    if (overFrame) {
      dy = aDesiredSize.BlockStartAscent() -
           mBoundingMetrics.ascent + bmOver.ascent -
           overSize.BlockStartAscent();
      FinishReflowChild (overFrame, PresContext(), overSize, nullptr, dxOver, dy, 0);
    }
    // place base
    dy = aDesiredSize.BlockStartAscent() - baseSize.BlockStartAscent();
    FinishReflowChild (baseFrame, PresContext(), baseSize, nullptr, dxBase, dy, 0);
    // place underscript
    if (underFrame) {
      dy = aDesiredSize.BlockStartAscent() +
           mBoundingMetrics.descent - bmUnder.descent -
           underSize.BlockStartAscent();
      FinishReflowChild (underFrame, PresContext(), underSize, nullptr,
                         dxUnder, dy, 0);
    }
  }
  return NS_OK;
}
void
nsVideoFrame::Reflow(nsPresContext* aPresContext,
                     ReflowOutput& aMetrics,
                     const ReflowInput& aReflowInput,
                     nsReflowStatus& aStatus)
{
  MarkInReflow();
  DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
  DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
  NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
                 ("enter nsVideoFrame::Reflow: availSize=%d,%d",
                  aReflowInput.AvailableWidth(),
                  aReflowInput.AvailableHeight()));

  NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");

  aStatus = NS_FRAME_COMPLETE;

  const WritingMode myWM = aReflowInput.GetWritingMode();
  nscoord contentBoxBSize = aReflowInput.ComputedBSize();
  const nscoord borderBoxISize = aReflowInput.ComputedISize() +
    aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
  const bool isBSizeShrinkWrapping = (contentBoxBSize == NS_INTRINSICSIZE);

  nscoord borderBoxBSize;
  if (!isBSizeShrinkWrapping) {
    borderBoxBSize = contentBoxBSize +
      aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
  }

  nsMargin borderPadding = aReflowInput.ComputedPhysicalBorderPadding();

  // Reflow the child frames. We may have up to three: an image
  // frame (for the poster image), a container frame for the controls,
  // and a container frame for the caption.
  for (nsIFrame* child : mFrames) {
    nsSize oldChildSize = child->GetSize();

    if (child->GetContent() == mPosterImage) {
      // Reflow the poster frame.
      nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
      ReflowOutput kidDesiredSize(aReflowInput);
      WritingMode wm = imageFrame->GetWritingMode();
      LogicalSize availableSize = aReflowInput.AvailableSize(wm);
      LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
                             ConvertTo(wm, aMetrics.GetWritingMode());
      ReflowInput kidReflowInput(aPresContext,
                                       aReflowInput,
                                       imageFrame,
                                       availableSize,
                                       &cbSize);

      nsRect posterRenderRect;
      if (ShouldDisplayPoster()) {
        posterRenderRect =
          nsRect(nsPoint(borderPadding.left, borderPadding.top),
                 nsSize(aReflowInput.ComputedWidth(),
                        aReflowInput.ComputedHeight()));
      }
      kidReflowInput.SetComputedWidth(posterRenderRect.width);
      kidReflowInput.SetComputedHeight(posterRenderRect.height);
      ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
                  posterRenderRect.x, posterRenderRect.y, 0, aStatus);
      FinishReflowChild(imageFrame, aPresContext,
                        kidDesiredSize, &kidReflowInput,
                        posterRenderRect.x, posterRenderRect.y, 0);

// Android still uses XUL media controls & hence needs this XUL-friendly
// custom reflow code. This will go away in bug 1310907.
#ifdef ANDROID
    } else if (child->GetContent() == mVideoControls) {
      // Reflow the video controls frame.
      nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
      nsBoxFrame::LayoutChildAt(boxState,
                                child,
                                nsRect(borderPadding.left,
                                       borderPadding.top,
                                       aReflowInput.ComputedWidth(),
                                       aReflowInput.ComputedHeight()));

#endif // ANDROID
    } else if (child->GetContent() == mCaptionDiv ||
               child->GetContent() == mVideoControls) {
      // Reflow the caption and control bar frames.
      WritingMode wm = child->GetWritingMode();
      LogicalSize availableSize = aReflowInput.ComputedSize(wm);
      availableSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;

      ReflowInput kidReflowInput(aPresContext,
                                       aReflowInput,
                                       child,
                                       availableSize);
      ReflowOutput kidDesiredSize(kidReflowInput);
      ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
                  borderPadding.left, borderPadding.top, 0, aStatus);

      if (child->GetContent() == mVideoControls && isBSizeShrinkWrapping) {
        // Resolve our own BSize based on the controls' size in the same axis.
        contentBoxBSize = myWM.IsOrthogonalTo(wm) ?
          kidDesiredSize.ISize(wm) : kidDesiredSize.BSize(wm);
      }

      FinishReflowChild(child, aPresContext,
                        kidDesiredSize, &kidReflowInput,
                        borderPadding.left, borderPadding.top, 0);
    }

    if (child->GetContent() == mVideoControls && child->GetSize() != oldChildSize) {
      RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
      nsContentUtils::AddScriptRunner(event);
    }
  }

  if (isBSizeShrinkWrapping) {
    if (contentBoxBSize == NS_INTRINSICSIZE) {
      // We didn't get a BSize from our intrinsic size/ratio, nor did we
      // get one from our controls. Just use BSize of 0.
      contentBoxBSize = 0;
    }
    contentBoxBSize = NS_CSS_MINMAX(contentBoxBSize,
                                    aReflowInput.ComputedMinBSize(),
                                    aReflowInput.ComputedMaxBSize());
    borderBoxBSize = contentBoxBSize +
      aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
  }

  LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
  aMetrics.SetSize(myWM, logicalDesiredSize);

  aMetrics.SetOverflowAreasToDesiredBounds();

  FinishAndStoreOverflow(&aMetrics);

  NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
                 ("exit nsVideoFrame::Reflow: size=%d,%d",
                  aMetrics.Width(), aMetrics.Height()));
  NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
nsresult
nsMathMLmfracFrame::PlaceInternal(DrawTarget*          aDrawTarget,
                                  bool                 aPlaceOrigin,
                                  ReflowOutput& aDesiredSize,
                                  bool                 aWidthOnly)
{
  ////////////////////////////////////
  // Get the children's desired sizes
  nsBoundingMetrics bmNum, bmDen;
  ReflowOutput sizeNum(aDesiredSize.GetWritingMode());
  ReflowOutput sizeDen(aDesiredSize.GetWritingMode());
  nsIFrame* frameDen = nullptr;
  nsIFrame* frameNum = mFrames.FirstChild();
  if (frameNum) 
    frameDen = frameNum->GetNextSibling();
  if (!frameNum || !frameDen || frameDen->GetNextSibling()) {
    // report an error, encourage people to get their markups in order
    if (aPlaceOrigin) {
      ReportChildCountError();
    }
    return ReflowError(aDrawTarget, aDesiredSize);
  }
  GetReflowAndBoundingMetricsFor(frameNum, sizeNum, bmNum);
  GetReflowAndBoundingMetricsFor(frameDen, sizeDen, bmDen);

  nsPresContext* presContext = PresContext();
  nscoord onePixel = nsPresContext::CSSPixelsToAppUnits(1);

  float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
  RefPtr<nsFontMetrics> fm =
    nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);

  nscoord defaultRuleThickness, axisHeight;
  nscoord oneDevPixel = fm->AppUnitsPerDevPixel();
  gfxFont* mathFont = fm->GetThebesFontGroup()->GetFirstMathFont();
  if (mathFont) {
    defaultRuleThickness =
      mathFont->GetMathConstant(gfxFontEntry::FractionRuleThickness,
                                oneDevPixel);
  } else {
    GetRuleThickness(aDrawTarget, fm, defaultRuleThickness);
  }
  GetAxisHeight(aDrawTarget, fm, axisHeight);

  bool outermostEmbellished = false;
  if (mEmbellishData.coreFrame) {
    nsEmbellishData parentData;
    GetEmbellishDataFrom(GetParent(), parentData);
    outermostEmbellished = parentData.coreFrame != mEmbellishData.coreFrame;
  }

  // see if the linethickness attribute is there 
  nsAutoString value;
  mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::linethickness_, value);
  mLineThickness = CalcLineThickness(presContext, mStyleContext, value,
                                     onePixel, defaultRuleThickness,
                                     fontSizeInflation);

  // bevelled attribute
  mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::bevelled_, value);
  mIsBevelled = value.EqualsLiteral("true");

  bool displayStyle = StyleFont()->mMathDisplay == NS_MATHML_DISPLAYSTYLE_BLOCK;

  if (!mIsBevelled) {
    mLineRect.height = mLineThickness;

    // by default, leave at least one-pixel padding at either end, and add
    // lspace & rspace that may come from <mo> if we are an outermost
    // embellished container (we fetch values from the core since they may use
    // units that depend on style data, and style changes could have occurred
    // in the core since our last visit there)
    nscoord leftSpace = onePixel;
    nscoord rightSpace = onePixel;
    if (outermostEmbellished) {
      nsEmbellishData coreData;
      GetEmbellishDataFrom(mEmbellishData.coreFrame, coreData);
      leftSpace += StyleVisibility()->mDirection ?
                     coreData.trailingSpace : coreData.leadingSpace;
      rightSpace += StyleVisibility()->mDirection ?
                      coreData.leadingSpace : coreData.trailingSpace;
    }

    nscoord actualRuleThickness =  mLineThickness;

    //////////////////
    // Get shifts
    nscoord numShift = 0;
    nscoord denShift = 0;

    // Rule 15b, App. G, TeXbook
    nscoord numShift1, numShift2, numShift3;
    nscoord denShift1, denShift2;

    GetNumeratorShifts(fm, numShift1, numShift2, numShift3);
    GetDenominatorShifts(fm, denShift1, denShift2);

    if (0 == actualRuleThickness) {
      numShift = displayStyle ? numShift1 : numShift3;
      denShift = displayStyle ? denShift1 : denShift2;
      if (mathFont) {
        numShift = mathFont->
          GetMathConstant(displayStyle ?
                          gfxFontEntry::StackTopDisplayStyleShiftUp :
                          gfxFontEntry::StackTopShiftUp,
                          oneDevPixel);
        denShift = mathFont->
          GetMathConstant(displayStyle ?
                          gfxFontEntry::StackBottomDisplayStyleShiftDown :
                          gfxFontEntry::StackBottomShiftDown,
                          oneDevPixel);
      }
    } else {
      numShift = displayStyle ? numShift1 : numShift2;
      denShift = displayStyle ? denShift1 : denShift2;
      if (mathFont) {
        numShift = mathFont->
          GetMathConstant(displayStyle ?
                          gfxFontEntry::FractionNumeratorDisplayStyleShiftUp :
                          gfxFontEntry::FractionNumeratorShiftUp,
                          oneDevPixel);
        denShift = mathFont->
          GetMathConstant(
            displayStyle ?
            gfxFontEntry::FractionDenominatorDisplayStyleShiftDown :
            gfxFontEntry::FractionDenominatorShiftDown,
            oneDevPixel);
      }
    }

    if (0 == actualRuleThickness) {
      // Rule 15c, App. G, TeXbook

      // min clearance between numerator and denominator
      nscoord minClearance = displayStyle ?
        7 * defaultRuleThickness : 3 * defaultRuleThickness;
      if (mathFont) {
        minClearance =
          mathFont->GetMathConstant(displayStyle ?
                                    gfxFontEntry::StackDisplayStyleGapMin :
                                    gfxFontEntry::StackGapMin,
                                    oneDevPixel);
      }
      // Factor in axis height
      // http://www.mathml-association.org/MathMLinHTML5/S3.html#SS3.SSS2
      numShift += axisHeight;
      denShift += axisHeight;

      nscoord actualClearance =
        (numShift - bmNum.descent) - (bmDen.ascent - denShift);
      // actualClearance should be >= minClearance
      if (actualClearance < minClearance) {
        nscoord halfGap = (minClearance - actualClearance)/2;
        numShift += halfGap;
        denShift += halfGap;
      }
    }
    else {
    // Rule 15d, App. G, TeXbook

    // min clearance between numerator or denominator and middle of bar

    // TeX has a different interpretation of the thickness.
    // Try $a \above10pt b$ to see. Here is what TeX does:
    // minClearance = displayStyle ?
    //   3 * actualRuleThickness : actualRuleThickness;
 
    // we slightly depart from TeX here. We use the defaultRuleThickness instead
    // of the value coming from the linethickness attribute, i.e., we recover what
    // TeX does if the user hasn't set linethickness. But when the linethickness
    // is set, we avoid the wide gap problem.
      nscoord minClearanceNum = displayStyle ?
        3 * defaultRuleThickness : defaultRuleThickness + onePixel;
      nscoord minClearanceDen = minClearanceNum;
      if (mathFont) {
        minClearanceNum = mathFont->
          GetMathConstant(displayStyle ?
                          gfxFontEntry::FractionNumDisplayStyleGapMin :
                          gfxFontEntry::FractionNumeratorGapMin,
                          oneDevPixel);
        minClearanceDen = mathFont->
          GetMathConstant(displayStyle ?
                          gfxFontEntry::FractionDenomDisplayStyleGapMin :
                          gfxFontEntry::FractionDenominatorGapMin,
                          oneDevPixel);
      }

      // adjust numShift to maintain minClearanceNum if needed
      nscoord actualClearanceNum =
        (numShift - bmNum.descent) - (axisHeight + actualRuleThickness/2);
      if (actualClearanceNum < minClearanceNum) {
        numShift += (minClearanceNum - actualClearanceNum);
      }
      // adjust denShift to maintain minClearanceDen if needed
      nscoord actualClearanceDen =
        (axisHeight - actualRuleThickness/2) - (bmDen.ascent - denShift);
      if (actualClearanceDen < minClearanceDen) {
        denShift += (minClearanceDen - actualClearanceDen);
      }
    }

    //////////////////
    // Place Children

    // XXX Need revisiting the width. TeX uses the exact width
    // e.g. in $$\huge\frac{\displaystyle\int}{i}$$
    nscoord width = std::max(bmNum.width, bmDen.width);
    nscoord dxNum = leftSpace + (width - sizeNum.Width())/2;
    nscoord dxDen = leftSpace + (width - sizeDen.Width())/2;
    width += leftSpace + rightSpace;

    // see if the numalign attribute is there 
    mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::numalign_, value);
    if (value.EqualsLiteral("left"))
      dxNum = leftSpace;
    else if (value.EqualsLiteral("right"))
      dxNum = width - rightSpace - sizeNum.Width();

    // see if the denomalign attribute is there 
    mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::denomalign_, value);
    if (value.EqualsLiteral("left"))
      dxDen = leftSpace;
    else if (value.EqualsLiteral("right"))
      dxDen = width - rightSpace - sizeDen.Width();

    mBoundingMetrics.rightBearing =
      std::max(dxNum + bmNum.rightBearing, dxDen + bmDen.rightBearing);
    if (mBoundingMetrics.rightBearing < width - rightSpace)
      mBoundingMetrics.rightBearing = width - rightSpace;
    mBoundingMetrics.leftBearing =
      std::min(dxNum + bmNum.leftBearing, dxDen + bmDen.leftBearing);
    if (mBoundingMetrics.leftBearing > leftSpace)
      mBoundingMetrics.leftBearing = leftSpace;
    mBoundingMetrics.ascent = bmNum.ascent + numShift;
    mBoundingMetrics.descent = bmDen.descent + denShift;
    mBoundingMetrics.width = width;

    aDesiredSize.SetBlockStartAscent(sizeNum.BlockStartAscent() + numShift);
    aDesiredSize.Height() = aDesiredSize.BlockStartAscent() +
      sizeDen.Height() - sizeDen.BlockStartAscent() + denShift;
    aDesiredSize.Width() = mBoundingMetrics.width;
    aDesiredSize.mBoundingMetrics = mBoundingMetrics;

    mReference.x = 0;
    mReference.y = aDesiredSize.BlockStartAscent();

    if (aPlaceOrigin) {
      nscoord dy;
      // place numerator
      dy = 0;
      FinishReflowChild(frameNum, presContext, sizeNum, nullptr, dxNum, dy, 0);
      // place denominator
      dy = aDesiredSize.Height() - sizeDen.Height();
      FinishReflowChild(frameDen, presContext, sizeDen, nullptr, dxDen, dy, 0);
      // place the fraction bar - dy is top of bar
      dy = aDesiredSize.BlockStartAscent() - (axisHeight + actualRuleThickness/2);
      mLineRect.SetRect(leftSpace, dy, width - (leftSpace + rightSpace),
                        actualRuleThickness);
    }
  } else {
    nscoord numShift = 0.0;
    nscoord denShift = 0.0;
    nscoord padding = 3 * defaultRuleThickness;
    nscoord slashRatio = 3;

    // Define the constant used in the expression of the maximum width
    nscoord em = fm->EmHeight();
    nscoord slashMaxWidthConstant = 2 * em;

    // For large line thicknesses the minimum slash height is limited to the
    // largest expected height of a fraction
    nscoord slashMinHeight = slashRatio *
      std::min(2 * mLineThickness, slashMaxWidthConstant);

    nscoord leadingSpace = padding;
    nscoord trailingSpace = padding;
    if (outermostEmbellished) {
      nsEmbellishData coreData;
      GetEmbellishDataFrom(mEmbellishData.coreFrame, coreData);
      leadingSpace += coreData.leadingSpace;
      trailingSpace += coreData.trailingSpace;
    }
    nscoord delta;
    
    //           ___________
    //          |           |    /
    //         {|-NUMERATOR-|   /
    //         {|___________|  S
    //         {               L
    // numShift{               A
    // ------------------------------------------------------- baseline
    //                         S   _____________ } denShift
    //                         H  |             |}
    //                        /   |-DENOMINATOR-|}
    //                       /    |_____________| 
    //

    // first, ensure that the top of the numerator is at least as high as the
    // top of the denominator (and the reverse for the bottoms)
    delta = std::max(bmDen.ascent - bmNum.ascent,
                   bmNum.descent - bmDen.descent) / 2;
    if (delta > 0) {
      numShift += delta;
      denShift += delta;
    }

    if (StyleFont()->mMathDisplay == NS_MATHML_DISPLAYSTYLE_BLOCK) {
      delta = std::min(bmDen.ascent + bmDen.descent,
                     bmNum.ascent + bmNum.descent) / 2;
      numShift += delta;
      denShift += delta;
    } else {
      nscoord xHeight = fm->XHeight();
      numShift += xHeight / 2;
      denShift += xHeight / 4;
    }
   
    // Set the ascent/descent of our BoundingMetrics.
    mBoundingMetrics.ascent = bmNum.ascent + numShift;
    mBoundingMetrics.descent = bmDen.descent + denShift;

    // At this point the height of the slash is
    // mBoundingMetrics.ascent + mBoundingMetrics.descent
    // Ensure that it is greater than slashMinHeight
    delta = (slashMinHeight -
             (mBoundingMetrics.ascent + mBoundingMetrics.descent)) / 2;
    if (delta > 0) {
      mBoundingMetrics.ascent += delta;
      mBoundingMetrics.descent += delta;
    }

    // Set the width of the slash
    if (aWidthOnly) {
      mLineRect.width = mLineThickness + slashMaxWidthConstant;
    } else {
      mLineRect.width = mLineThickness +
        std::min(slashMaxWidthConstant,
               (mBoundingMetrics.ascent + mBoundingMetrics.descent) /
               slashRatio);
    }

    // Set horizontal bounding metrics
    if (StyleVisibility()->mDirection) {
      mBoundingMetrics.leftBearing = trailingSpace + bmDen.leftBearing;
      mBoundingMetrics.rightBearing = trailingSpace + bmDen.width + mLineRect.width + bmNum.rightBearing;
    } else {
      mBoundingMetrics.leftBearing = leadingSpace + bmNum.leftBearing;
      mBoundingMetrics.rightBearing = leadingSpace + bmNum.width + mLineRect.width + bmDen.rightBearing;
    }
    mBoundingMetrics.width =
      leadingSpace + bmNum.width + mLineRect.width + bmDen.width +
      trailingSpace;

    // Set aDesiredSize
    aDesiredSize.SetBlockStartAscent(mBoundingMetrics.ascent + padding);
    aDesiredSize.Height() =
      mBoundingMetrics.ascent + mBoundingMetrics.descent + 2 * padding;
    aDesiredSize.Width() = mBoundingMetrics.width;
    aDesiredSize.mBoundingMetrics = mBoundingMetrics;

    mReference.x = 0;
    mReference.y = aDesiredSize.BlockStartAscent();
    
    if (aPlaceOrigin) {
      nscoord dx, dy;

      // place numerator
      dx = MirrorIfRTL(aDesiredSize.Width(), sizeNum.Width(),
                       leadingSpace);
      dy = aDesiredSize.BlockStartAscent() - numShift - sizeNum.BlockStartAscent();
      FinishReflowChild(frameNum, presContext, sizeNum, nullptr, dx, dy, 0);

      // place the fraction bar
      dx = MirrorIfRTL(aDesiredSize.Width(), mLineRect.width,
                       leadingSpace + bmNum.width);
      dy = aDesiredSize.BlockStartAscent() - mBoundingMetrics.ascent;
      mLineRect.SetRect(dx, dy,
                        mLineRect.width, aDesiredSize.Height() - 2 * padding);

      // place denominator
      dx = MirrorIfRTL(aDesiredSize.Width(), sizeDen.Width(),
                       leadingSpace + bmNum.width + mLineRect.width);
      dy = aDesiredSize.BlockStartAscent() + denShift - sizeDen.BlockStartAscent();
      FinishReflowChild(frameDen, presContext, sizeDen, nullptr, dx, dy, 0);
    }

  }

  return NS_OK;
}
void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
                                               ReflowOutput& aButtonDesiredSize,
                                               const ReflowInput& aButtonReflowInput,
                                               nsIFrame* aFirstKid)
{
  WritingMode wm = GetWritingMode();
  LogicalSize availSize = aButtonReflowInput.ComputedSize(wm);
  availSize.BSize(wm) = NS_INTRINSICSIZE;

  // Buttons have some bonus renderer-determined border/padding,
  // which occupies part of the button's content-box area:
  LogicalMargin focusPadding =
    LogicalMargin(wm, mRenderer.GetAddedButtonBorderAndPadding());

  // See whether out availSize's inline-size is big enough.  If it's
  // smaller than our intrinsic min iSize, that means that the kid
  // wouldn't really fit.  In that case, we overflow into our internal
  // focuspadding (which other browsers don't have) so that there's a
  // little more space for it.
  // Note that GetMinISize includes the focusPadding.
  nscoord IOverflow = GetMinISize(aButtonReflowInput.mRenderingContext) -
                      aButtonReflowInput.ComputedISize();
  nscoord IFocusPadding = focusPadding.IStartEnd(wm);
  nscoord focusPaddingReduction = std::min(IFocusPadding,
                                           std::max(IOverflow, 0));
  if (focusPaddingReduction > 0) {
    nscoord startReduction = focusPadding.IStart(wm);
    if (focusPaddingReduction != IFocusPadding) {
      startReduction = NSToCoordRound(startReduction *
                                      (float(focusPaddingReduction) /
                                       float(IFocusPadding)));
    }
    focusPadding.IStart(wm) -= startReduction;
    focusPadding.IEnd(wm) -= focusPaddingReduction - startReduction;
  }

  // shorthand for a value we need to use in a bunch of places
  const LogicalMargin& clbp = aButtonReflowInput.ComputedLogicalBorderPadding();

  // Indent the child inside us by the focus border. We must do this separate
  // from the regular border.
  availSize.ISize(wm) -= focusPadding.IStartEnd(wm);

  LogicalPoint childPos(wm);
  childPos.I(wm) = focusPadding.IStart(wm) + clbp.IStart(wm);
  availSize.ISize(wm) = std::max(availSize.ISize(wm), 0);

  // Give child a clone of the button's reflow state, with height/width reduced
  // by focusPadding, so that descendants with height:100% don't protrude.
  ReflowInput adjustedButtonReflowInput =
    CloneReflowInputWithReducedContentBox(aButtonReflowInput, focusPadding);

  ReflowInput contentsReflowInput(aPresContext,
                                        adjustedButtonReflowInput,
                                        aFirstKid, availSize);

  nsReflowStatus contentsReflowStatus;
  ReflowOutput contentsDesiredSize(aButtonReflowInput);
  childPos.B(wm) = 0; // This will be set properly later, after reflowing the
                      // child to determine its size.

  // We just pass a dummy containerSize here, as the child will be
  // repositioned later by FinishReflowChild.
  nsSize dummyContainerSize;
  ReflowChild(aFirstKid, aPresContext,
              contentsDesiredSize, contentsReflowInput,
              wm, childPos, dummyContainerSize, 0, contentsReflowStatus);
  MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
             "We gave button-contents frame unconstrained available height, "
             "so it should be complete");

  // Compute the button's content-box size:
  LogicalSize buttonContentBox(wm);
  if (aButtonReflowInput.ComputedBSize() != NS_INTRINSICSIZE) {
    // Button has a fixed block-size -- that's its content-box bSize.
    buttonContentBox.BSize(wm) = aButtonReflowInput.ComputedBSize();
  } else {
    // Button is intrinsically sized -- it should shrinkwrap the
    // button-contents' bSize, plus any focus-padding space:
    buttonContentBox.BSize(wm) =
      contentsDesiredSize.BSize(wm) + focusPadding.BStartEnd(wm);

    // Make sure we obey min/max-bSize in the case when we're doing intrinsic
    // sizing (we get it for free when we have a non-intrinsic
    // aButtonReflowInput.ComputedBSize()).  Note that we do this before
    // adjusting for borderpadding, since mComputedMaxBSize and
    // mComputedMinBSize are content bSizes.
    buttonContentBox.BSize(wm) =
      NS_CSS_MINMAX(buttonContentBox.BSize(wm),
                    aButtonReflowInput.ComputedMinBSize(),
                    aButtonReflowInput.ComputedMaxBSize());
  }
  if (aButtonReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
    buttonContentBox.ISize(wm) = aButtonReflowInput.ComputedISize();
  } else {
    buttonContentBox.ISize(wm) =
      contentsDesiredSize.ISize(wm) + focusPadding.IStartEnd(wm);
    buttonContentBox.ISize(wm) =
      NS_CSS_MINMAX(buttonContentBox.ISize(wm),
                    aButtonReflowInput.ComputedMinISize(),
                    aButtonReflowInput.ComputedMaxISize());
  }

  // Center child in the block-direction in the button
  // (technically, inside of the button's focus-padding area)
  nscoord extraSpace =
    buttonContentBox.BSize(wm) - focusPadding.BStartEnd(wm) -
    contentsDesiredSize.BSize(wm);

  childPos.B(wm) = std::max(0, extraSpace / 2);

  // Adjust childPos.B() to be in terms of the button's frame-rect, instead of
  // its focus-padding rect:
  childPos.B(wm) += focusPadding.BStart(wm) + clbp.BStart(wm);

  nsSize containerSize =
    (buttonContentBox + clbp.Size(wm)).GetPhysicalSize(wm);

  // Place the child
  FinishReflowChild(aFirstKid, aPresContext,
                    contentsDesiredSize, &contentsReflowInput,
                    wm, childPos, containerSize, 0);

  // Make sure we have a useful 'ascent' value for the child
  if (contentsDesiredSize.BlockStartAscent() ==
      ReflowOutput::ASK_FOR_BASELINE) {
    WritingMode wm = aButtonReflowInput.GetWritingMode();
    contentsDesiredSize.SetBlockStartAscent(aFirstKid->GetLogicalBaseline(wm));
  }

  // OK, we're done with the child frame.
  // Use what we learned to populate the button frame's reflow metrics.
  //  * Button's height & width are content-box size + border-box contribution:
  aButtonDesiredSize.SetSize(wm,
    LogicalSize(wm, aButtonReflowInput.ComputedISize() + clbp.IStartEnd(wm),
                    buttonContentBox.BSize(wm) + clbp.BStartEnd(wm)));

  //  * Button's ascent is its child's ascent, plus the child's block-offset
  // within our frame... unless it's orthogonal, in which case we'll use the
  // contents inline-size as an approximation for now.
  // XXX is there a better strategy? should we include border-padding?
  if (aButtonDesiredSize.GetWritingMode().IsOrthogonalTo(wm)) {
    aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.ISize(wm));
  } else {
    aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.BlockStartAscent() +
                                           childPos.B(wm));
  }

  aButtonDesiredSize.SetOverflowAreasToDesiredBounds();
}