static
void DebugCheckChildSize(nsIFrame* aChild,
ReflowOutput& aMet)
{
WritingMode wm = aMet.GetWritingMode();
if ((aMet.ISize(wm) < 0) || (aMet.ISize(wm) > PROBABLY_TOO_LARGE)) {
printf("WARNING: cell content %p has large inline size %d \n",
static_cast<void*>(aChild), int32_t(aMet.ISize(wm)));
}
}
void
nsVideoFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsVideoFrame::Reflow: availSize=%d,%d",
aReflowInput.AvailableWidth(), aReflowInput.AvailableHeight()));
NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");
aStatus = NS_FRAME_COMPLETE;
aMetrics.Width() = aReflowInput.ComputedWidth();
aMetrics.Height() = aReflowInput.ComputedHeight();
// stash this away so we can compute our inner area later
mBorderPadding = aReflowInput.ComputedPhysicalBorderPadding();
aMetrics.Width() += mBorderPadding.left + mBorderPadding.right;
aMetrics.Height() += mBorderPadding.top + mBorderPadding.bottom;
// Reflow the child frames. We may have up to two, an image frame
// which is the poster, and a box frame, which is the video controls.
for (nsIFrame* child : mFrames) {
if (child->GetContent() == mPosterImage) {
// Reflow the poster frame.
nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = imageFrame->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
imageFrame,
availableSize,
&cbSize);
nsRect posterRenderRect;
if (ShouldDisplayPoster()) {
posterRenderRect =
nsRect(nsPoint(mBorderPadding.left, mBorderPadding.top),
nsSize(aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
}
kidReflowInput.SetComputedWidth(posterRenderRect.width);
kidReflowInput.SetComputedHeight(posterRenderRect.height);
ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0, aStatus);
FinishReflowChild(imageFrame, aPresContext,
kidDesiredSize, &kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0);
} else if (child->GetContent() == mVideoControls) {
// Reflow the video controls frame.
nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
nsSize size = child->GetSize();
nsBoxFrame::LayoutChildAt(boxState,
child,
nsRect(mBorderPadding.left,
mBorderPadding.top,
aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
if (child->GetSize() != size) {
RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
nsContentUtils::AddScriptRunner(event);
}
} else if (child->GetContent() == mCaptionDiv) {
// Reflow to caption div
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = child->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
child,
availableSize,
&cbSize);
nsSize size(aReflowInput.ComputedWidth(), aReflowInput.ComputedHeight());
size.width -= kidReflowInput.ComputedPhysicalBorderPadding().LeftRight();
size.height -= kidReflowInput.ComputedPhysicalBorderPadding().TopBottom();
kidReflowInput.SetComputedWidth(std::max(size.width, 0));
kidReflowInput.SetComputedHeight(std::max(size.height, 0));
ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
mBorderPadding.left, mBorderPadding.top, 0, aStatus);
FinishReflowChild(child, aPresContext,
kidDesiredSize, &kidReflowInput,
mBorderPadding.left, mBorderPadding.top, 0);
}
}
aMetrics.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aMetrics);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsVideoFrame::Reflow: size=%d,%d",
aMetrics.Width(), aMetrics.Height()));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
/* virtual */ nsresult
nsMathMLmencloseFrame::PlaceInternal(DrawTarget* aDrawTarget,
bool aPlaceOrigin,
ReflowOutput& aDesiredSize,
bool aWidthOnly)
{
///////////////
// Measure the size of our content using the base class to format like an
// inferred mrow.
ReflowOutput baseSize(aDesiredSize.GetWritingMode());
nsresult rv =
nsMathMLContainerFrame::Place(aDrawTarget, false, baseSize);
if (NS_MATHML_HAS_ERROR(mPresentationData.flags) || NS_FAILED(rv)) {
DidReflowChildren(PrincipalChildList().FirstChild());
return rv;
}
nsBoundingMetrics bmBase = baseSize.mBoundingMetrics;
nscoord dx_left = 0, dx_right = 0;
nsBoundingMetrics bmLongdivChar, bmRadicalChar;
nscoord radicalAscent = 0, radicalDescent = 0;
nscoord longdivAscent = 0, longdivDescent = 0;
nscoord psi = 0;
nscoord leading = 0;
///////////////
// Thickness of bars and font metrics
nscoord onePixel = nsPresContext::CSSPixelsToAppUnits(1);
float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);
GetRuleThickness(aDrawTarget, fm, mRuleThickness);
if (mRuleThickness < onePixel) {
mRuleThickness = onePixel;
}
char16_t one = '1';
nsBoundingMetrics bmOne =
nsLayoutUtils::AppUnitBoundsOfString(&one, 1, *fm, aDrawTarget);
///////////////
// General rules: the menclose element takes the size of the enclosed content.
// We add a padding when needed.
// determine padding & psi
nscoord padding = 3 * mRuleThickness;
nscoord delta = padding % onePixel;
if (delta)
padding += onePixel - delta; // round up
if (IsToDraw(NOTATION_LONGDIV) || IsToDraw(NOTATION_RADICAL)) {
GetRadicalParameters(fm, StyleFont()->mMathDisplay ==
NS_MATHML_DISPLAYSTYLE_BLOCK,
mRadicalRuleThickness, leading, psi);
// make sure that the rule appears on on screen
if (mRadicalRuleThickness < onePixel) {
mRadicalRuleThickness = onePixel;
}
// adjust clearance psi to get an exact number of pixels -- this
// gives a nicer & uniform look on stacked radicals (bug 130282)
delta = psi % onePixel;
if (delta) {
psi += onePixel - delta; // round up
}
}
// Set horizontal parameters
if (IsToDraw(NOTATION_ROUNDEDBOX) ||
IsToDraw(NOTATION_TOP) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_BOTTOM) ||
IsToDraw(NOTATION_CIRCLE))
dx_left = padding;
if (IsToDraw(NOTATION_ROUNDEDBOX) ||
IsToDraw(NOTATION_TOP) ||
IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_BOTTOM) ||
IsToDraw(NOTATION_CIRCLE))
dx_right = padding;
// Set vertical parameters
if (IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_UPDIAGONALSTRIKE) ||
IsToDraw(NOTATION_UPDIAGONALARROW) ||
IsToDraw(NOTATION_DOWNDIAGONALSTRIKE) ||
IsToDraw(NOTATION_VERTICALSTRIKE) ||
IsToDraw(NOTATION_CIRCLE) ||
IsToDraw(NOTATION_ROUNDEDBOX) ||
IsToDraw(NOTATION_RADICAL) ||
IsToDraw(NOTATION_LONGDIV) ||
IsToDraw(NOTATION_PHASORANGLE)) {
// set a minimal value for the base height
bmBase.ascent = std::max(bmOne.ascent, bmBase.ascent);
bmBase.descent = std::max(0, bmBase.descent);
}
mBoundingMetrics.ascent = bmBase.ascent;
mBoundingMetrics.descent = bmBase.descent;
if (IsToDraw(NOTATION_ROUNDEDBOX) ||
IsToDraw(NOTATION_TOP) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_CIRCLE))
mBoundingMetrics.ascent += padding;
if (IsToDraw(NOTATION_ROUNDEDBOX) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_BOTTOM) ||
IsToDraw(NOTATION_CIRCLE))
mBoundingMetrics.descent += padding;
///////////////
// phasorangle notation
if (IsToDraw(NOTATION_PHASORANGLE)) {
nscoord phasorangleWidth = kPhasorangleWidth * mRuleThickness;
// Update horizontal parameters
dx_left = std::max(dx_left, phasorangleWidth);
}
///////////////
// updiagonal arrow notation. We need enough space at the top right corner to
// draw the arrow head.
if (IsToDraw(NOTATION_UPDIAGONALARROW)) {
// This is an estimate, see nsDisplayNotation::Paint for the exact head size
nscoord arrowHeadSize = kArrowHeadSize * mRuleThickness;
// We want that the arrow shaft strikes the menclose content and that the
// arrow head does not overlap with that content. Hence we add some space
// on the right. We don't add space on the top but only ensure that the
// ascent is large enough.
dx_right = std::max(dx_right, arrowHeadSize);
mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent, arrowHeadSize);
}
///////////////
// circle notation: we don't want the ellipse to overlap the enclosed
// content. Hence, we need to increase the size of the bounding box by a
// factor of at least sqrt(2).
if (IsToDraw(NOTATION_CIRCLE)) {
double ratio = (sqrt(2.0) - 1.0) / 2.0;
nscoord padding2;
// Update horizontal parameters
padding2 = ratio * bmBase.width;
dx_left = std::max(dx_left, padding2);
dx_right = std::max(dx_right, padding2);
// Update vertical parameters
padding2 = ratio * (bmBase.ascent + bmBase.descent);
mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent,
bmBase.ascent + padding2);
mBoundingMetrics.descent = std::max(mBoundingMetrics.descent,
bmBase.descent + padding2);
}
///////////////
// longdiv notation:
if (IsToDraw(NOTATION_LONGDIV)) {
if (aWidthOnly) {
nscoord longdiv_width = mMathMLChar[mLongDivCharIndex].
GetMaxWidth(PresContext(), aDrawTarget, fontSizeInflation);
// Update horizontal parameters
dx_left = std::max(dx_left, longdiv_width);
} else {
// Stretch the parenthesis to the appropriate height if it is not
// big enough.
nsBoundingMetrics contSize = bmBase;
contSize.ascent = mRuleThickness;
contSize.descent = bmBase.ascent + bmBase.descent + psi;
// height(longdiv) should be >= height(base) + psi + mRuleThickness
mMathMLChar[mLongDivCharIndex].Stretch(PresContext(), aDrawTarget,
fontSizeInflation,
NS_STRETCH_DIRECTION_VERTICAL,
contSize, bmLongdivChar,
NS_STRETCH_LARGER, false);
mMathMLChar[mLongDivCharIndex].GetBoundingMetrics(bmLongdivChar);
// Update horizontal parameters
dx_left = std::max(dx_left, bmLongdivChar.width);
// Update vertical parameters
longdivAscent = bmBase.ascent + psi + mRuleThickness;
longdivDescent = std::max(bmBase.descent,
(bmLongdivChar.ascent + bmLongdivChar.descent -
longdivAscent));
mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent,
longdivAscent);
mBoundingMetrics.descent = std::max(mBoundingMetrics.descent,
longdivDescent);
}
}
///////////////
// radical notation:
if (IsToDraw(NOTATION_RADICAL)) {
nscoord *dx_leading = StyleVisibility()->mDirection ? &dx_right : &dx_left;
if (aWidthOnly) {
nscoord radical_width = mMathMLChar[mRadicalCharIndex].
GetMaxWidth(PresContext(), aDrawTarget, fontSizeInflation);
// Update horizontal parameters
*dx_leading = std::max(*dx_leading, radical_width);
} else {
// Stretch the radical symbol to the appropriate height if it is not
// big enough.
nsBoundingMetrics contSize = bmBase;
contSize.ascent = mRadicalRuleThickness;
contSize.descent = bmBase.ascent + bmBase.descent + psi;
// height(radical) should be >= height(base) + psi + mRadicalRuleThickness
mMathMLChar[mRadicalCharIndex].Stretch(PresContext(), aDrawTarget,
fontSizeInflation,
NS_STRETCH_DIRECTION_VERTICAL,
contSize, bmRadicalChar,
NS_STRETCH_LARGER,
StyleVisibility()->mDirection);
mMathMLChar[mRadicalCharIndex].GetBoundingMetrics(bmRadicalChar);
// Update horizontal parameters
*dx_leading = std::max(*dx_leading, bmRadicalChar.width);
// Update vertical parameters
radicalAscent = bmBase.ascent + psi + mRadicalRuleThickness;
radicalDescent = std::max(bmBase.descent,
(bmRadicalChar.ascent + bmRadicalChar.descent -
radicalAscent));
mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent,
radicalAscent);
mBoundingMetrics.descent = std::max(mBoundingMetrics.descent,
radicalDescent);
}
}
///////////////
//
if (IsToDraw(NOTATION_CIRCLE) ||
IsToDraw(NOTATION_ROUNDEDBOX) ||
(IsToDraw(NOTATION_LEFT) && IsToDraw(NOTATION_RIGHT))) {
// center the menclose around the content (horizontally)
dx_left = dx_right = std::max(dx_left, dx_right);
}
///////////////
// The maximum size is now computed: set the remaining parameters
mBoundingMetrics.width = dx_left + bmBase.width + dx_right;
mBoundingMetrics.leftBearing = std::min(0, dx_left + bmBase.leftBearing);
mBoundingMetrics.rightBearing =
std::max(mBoundingMetrics.width, dx_left + bmBase.rightBearing);
aDesiredSize.Width() = mBoundingMetrics.width;
aDesiredSize.SetBlockStartAscent(std::max(mBoundingMetrics.ascent,
baseSize.BlockStartAscent()));
aDesiredSize.Height() = aDesiredSize.BlockStartAscent() +
std::max(mBoundingMetrics.descent,
baseSize.Height() - baseSize.BlockStartAscent());
if (IsToDraw(NOTATION_LONGDIV) || IsToDraw(NOTATION_RADICAL)) {
nscoord desiredSizeAscent = aDesiredSize.BlockStartAscent();
nscoord desiredSizeDescent = aDesiredSize.Height() -
aDesiredSize.BlockStartAscent();
if (IsToDraw(NOTATION_LONGDIV)) {
desiredSizeAscent = std::max(desiredSizeAscent,
longdivAscent + leading);
desiredSizeDescent = std::max(desiredSizeDescent,
longdivDescent + mRuleThickness);
}
if (IsToDraw(NOTATION_RADICAL)) {
desiredSizeAscent = std::max(desiredSizeAscent,
radicalAscent + leading);
desiredSizeDescent = std::max(desiredSizeDescent,
radicalDescent + mRadicalRuleThickness);
}
aDesiredSize.SetBlockStartAscent(desiredSizeAscent);
aDesiredSize.Height() = desiredSizeAscent + desiredSizeDescent;
}
if (IsToDraw(NOTATION_CIRCLE) ||
IsToDraw(NOTATION_ROUNDEDBOX) ||
(IsToDraw(NOTATION_TOP) && IsToDraw(NOTATION_BOTTOM))) {
// center the menclose around the content (vertically)
nscoord dy = std::max(aDesiredSize.BlockStartAscent() - bmBase.ascent,
aDesiredSize.Height() -
aDesiredSize.BlockStartAscent() - bmBase.descent);
aDesiredSize.SetBlockStartAscent(bmBase.ascent + dy);
aDesiredSize.Height() = aDesiredSize.BlockStartAscent() + bmBase.descent + dy;
}
// Update mBoundingMetrics ascent/descent
if (IsToDraw(NOTATION_TOP) ||
IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_UPDIAGONALSTRIKE) ||
IsToDraw(NOTATION_UPDIAGONALARROW) ||
IsToDraw(NOTATION_DOWNDIAGONALSTRIKE) ||
IsToDraw(NOTATION_VERTICALSTRIKE) ||
IsToDraw(NOTATION_CIRCLE) ||
IsToDraw(NOTATION_ROUNDEDBOX))
mBoundingMetrics.ascent = aDesiredSize.BlockStartAscent();
if (IsToDraw(NOTATION_BOTTOM) ||
IsToDraw(NOTATION_RIGHT) ||
IsToDraw(NOTATION_LEFT) ||
IsToDraw(NOTATION_UPDIAGONALSTRIKE) ||
IsToDraw(NOTATION_UPDIAGONALARROW) ||
IsToDraw(NOTATION_DOWNDIAGONALSTRIKE) ||
IsToDraw(NOTATION_VERTICALSTRIKE) ||
IsToDraw(NOTATION_CIRCLE) ||
IsToDraw(NOTATION_ROUNDEDBOX))
mBoundingMetrics.descent = aDesiredSize.Height() - aDesiredSize.BlockStartAscent();
// phasorangle notation:
// move up from the bottom by the angled line height
if (IsToDraw(NOTATION_PHASORANGLE))
mBoundingMetrics.ascent = std::max(mBoundingMetrics.ascent, 2 * kPhasorangleWidth * mRuleThickness - mBoundingMetrics.descent);
aDesiredSize.mBoundingMetrics = mBoundingMetrics;
mReference.x = 0;
mReference.y = aDesiredSize.BlockStartAscent();
if (aPlaceOrigin) {
//////////////////
// Set position and size of MathMLChars
if (IsToDraw(NOTATION_LONGDIV))
mMathMLChar[mLongDivCharIndex].SetRect(nsRect(dx_left -
bmLongdivChar.width,
aDesiredSize.BlockStartAscent() -
longdivAscent,
bmLongdivChar.width,
bmLongdivChar.ascent +
bmLongdivChar.descent));
if (IsToDraw(NOTATION_RADICAL)) {
nscoord dx = (StyleVisibility()->mDirection ?
dx_left + bmBase.width : dx_left - bmRadicalChar.width);
mMathMLChar[mRadicalCharIndex].SetRect(nsRect(dx,
aDesiredSize.BlockStartAscent() -
radicalAscent,
bmRadicalChar.width,
bmRadicalChar.ascent +
bmRadicalChar.descent));
}
mContentWidth = bmBase.width;
//////////////////
// Finish reflowing child frames
PositionRowChildFrames(dx_left, aDesiredSize.BlockStartAscent());
}
return NS_OK;
}
void
nsFirstLetterFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aReflowStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsFirstLetterFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aReflowStatus);
// Grab overflow list
DrainOverflowFrames(aPresContext);
nsIFrame* kid = mFrames.FirstChild();
// Setup reflow state for our child
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize availSize = aReflowInput.AvailableSize();
const LogicalMargin& bp = aReflowInput.ComputedLogicalBorderPadding();
NS_ASSERTION(availSize.ISize(wm) != NS_UNCONSTRAINEDSIZE,
"should no longer use unconstrained inline size");
availSize.ISize(wm) -= bp.IStartEnd(wm);
if (NS_UNCONSTRAINEDSIZE != availSize.BSize(wm)) {
availSize.BSize(wm) -= bp.BStartEnd(wm);
}
WritingMode lineWM = aMetrics.GetWritingMode();
ReflowOutput kidMetrics(lineWM);
// Reflow the child
if (!aReflowInput.mLineLayout) {
// When there is no lineLayout provided, we provide our own. The
// only time that the first-letter-frame is not reflowing in a
// line context is when its floating.
WritingMode kidWritingMode = WritingModeForLine(wm, kid);
LogicalSize kidAvailSize = availSize.ConvertTo(kidWritingMode, wm);
ReflowInput rs(aPresContext, aReflowInput, kid, kidAvailSize);
nsLineLayout ll(aPresContext, nullptr, &aReflowInput, nullptr, nullptr);
ll.BeginLineReflow(bp.IStart(wm), bp.BStart(wm),
availSize.ISize(wm), NS_UNCONSTRAINEDSIZE,
false, true, kidWritingMode,
nsSize(aReflowInput.AvailableWidth(),
aReflowInput.AvailableHeight()));
rs.mLineLayout = ≪
ll.SetInFirstLetter(true);
ll.SetFirstLetterStyleOK(true);
kid->Reflow(aPresContext, kidMetrics, rs, aReflowStatus);
ll.EndLineReflow();
ll.SetInFirstLetter(false);
// In the floating first-letter case, we need to set this ourselves;
// nsLineLayout::BeginSpan will set it in the other case
mBaseline = kidMetrics.BlockStartAscent();
// Place and size the child and update the output metrics
LogicalSize convertedSize = kidMetrics.Size(lineWM).ConvertTo(wm, lineWM);
kid->SetRect(nsRect(bp.IStart(wm), bp.BStart(wm),
convertedSize.ISize(wm), convertedSize.BSize(wm)));
kid->FinishAndStoreOverflow(&kidMetrics);
kid->DidReflow(aPresContext, nullptr, nsDidReflowStatus::FINISHED);
convertedSize.ISize(wm) += bp.IStartEnd(wm);
convertedSize.BSize(wm) += bp.BStartEnd(wm);
aMetrics.SetSize(wm, convertedSize);
aMetrics.SetBlockStartAscent(kidMetrics.BlockStartAscent() +
bp.BStart(wm));
// Ensure that the overflow rect contains the child textframe's
// overflow rect.
// Note that if this is floating, the overline/underline drawable
// area is in the overflow rect of the child textframe.
aMetrics.UnionOverflowAreasWithDesiredBounds();
ConsiderChildOverflow(aMetrics.mOverflowAreas, kid);
FinishAndStoreOverflow(&aMetrics);
} else {
// Pretend we are a span and reflow the child frame
nsLineLayout* ll = aReflowInput.mLineLayout;
bool pushedFrame;
ll->SetInFirstLetter(
mStyleContext->GetPseudo() == nsCSSPseudoElements::firstLetter);
ll->BeginSpan(this, &aReflowInput, bp.IStart(wm),
availSize.ISize(wm), &mBaseline);
ll->ReflowFrame(kid, aReflowStatus, &kidMetrics, pushedFrame);
NS_ASSERTION(lineWM.IsVertical() == wm.IsVertical(),
"we're assuming we can mix sizes between lineWM and wm "
"since we shouldn't have orthogonal writing modes within "
"a line.");
aMetrics.ISize(lineWM) = ll->EndSpan(this) + bp.IStartEnd(wm);
ll->SetInFirstLetter(false);
if (mStyleContext->StyleTextReset()->mInitialLetterSize != 0.0f) {
aMetrics.SetBlockStartAscent(kidMetrics.BlockStartAscent() +
bp.BStart(wm));
aMetrics.BSize(lineWM) = kidMetrics.BSize(lineWM) + bp.BStartEnd(wm);
} else {
nsLayoutUtils::SetBSizeFromFontMetrics(this, aMetrics, bp, lineWM, wm);
}
}
if (!NS_INLINE_IS_BREAK_BEFORE(aReflowStatus)) {
// Create a continuation or remove existing continuations based on
// the reflow completion status.
if (NS_FRAME_IS_COMPLETE(aReflowStatus)) {
if (aReflowInput.mLineLayout) {
aReflowInput.mLineLayout->SetFirstLetterStyleOK(false);
}
nsIFrame* kidNextInFlow = kid->GetNextInFlow();
if (kidNextInFlow) {
// Remove all of the childs next-in-flows
kidNextInFlow->GetParent()->DeleteNextInFlowChild(kidNextInFlow, true);
}
} else {
// Create a continuation for the child frame if it doesn't already
// have one.
if (!IsFloating()) {
CreateNextInFlow(kid);
// And then push it to our overflow list
const nsFrameList& overflow = mFrames.RemoveFramesAfter(kid);
if (overflow.NotEmpty()) {
SetOverflowFrames(overflow);
}
} else if (!kid->GetNextInFlow()) {
// For floating first letter frames (if a continuation wasn't already
// created for us) we need to put the continuation with the rest of the
// text that the first letter frame was made out of.
nsIFrame* continuation;
CreateContinuationForFloatingParent(aPresContext, kid,
&continuation, true);
}
}
}
NS_FRAME_SET_TRUNCATION(aReflowStatus, aReflowInput, aMetrics);
}
/* virtual */ nsresult
nsMathMLmunderoverFrame::Place(DrawTarget* aDrawTarget,
bool aPlaceOrigin,
ReflowOutput& aDesiredSize)
{
float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
if (NS_MATHML_EMBELLISH_IS_MOVABLELIMITS(mEmbellishData.flags) &&
StyleFont()->mMathDisplay == NS_MATHML_DISPLAYSTYLE_INLINE) {
//place like sub sup or subsup
if (mContent->IsMathMLElement(nsGkAtoms::munderover_)) {
return nsMathMLmmultiscriptsFrame::PlaceMultiScript(PresContext(),
aDrawTarget,
aPlaceOrigin,
aDesiredSize,
this, 0, 0,
fontSizeInflation);
} else if (mContent->IsMathMLElement( nsGkAtoms::munder_)) {
return nsMathMLmmultiscriptsFrame::PlaceMultiScript(PresContext(),
aDrawTarget,
aPlaceOrigin,
aDesiredSize,
this, 0, 0,
fontSizeInflation);
} else {
NS_ASSERTION(mContent->IsMathMLElement(nsGkAtoms::mover_),
"mContent->NodeInfo()->NameAtom() not recognized");
return nsMathMLmmultiscriptsFrame::PlaceMultiScript(PresContext(),
aDrawTarget,
aPlaceOrigin,
aDesiredSize,
this, 0, 0,
fontSizeInflation);
}
}
////////////////////////////////////
// Get the children's desired sizes
nsBoundingMetrics bmBase, bmUnder, bmOver;
ReflowOutput baseSize(aDesiredSize.GetWritingMode());
ReflowOutput underSize(aDesiredSize.GetWritingMode());
ReflowOutput overSize(aDesiredSize.GetWritingMode());
nsIFrame* overFrame = nullptr;
nsIFrame* underFrame = nullptr;
nsIFrame* baseFrame = mFrames.FirstChild();
underSize.SetBlockStartAscent(0);
overSize.SetBlockStartAscent(0);
bool haveError = false;
if (baseFrame) {
if (mContent->IsAnyOfMathMLElements(nsGkAtoms::munder_,
nsGkAtoms::munderover_)) {
underFrame = baseFrame->GetNextSibling();
} else if (mContent->IsMathMLElement(nsGkAtoms::mover_)) {
overFrame = baseFrame->GetNextSibling();
}
}
if (underFrame && mContent->IsMathMLElement(nsGkAtoms::munderover_)) {
overFrame = underFrame->GetNextSibling();
}
if (mContent->IsMathMLElement(nsGkAtoms::munder_)) {
if (!baseFrame || !underFrame || underFrame->GetNextSibling()) {
// report an error, encourage people to get their markups in order
haveError = true;
}
}
if (mContent->IsMathMLElement(nsGkAtoms::mover_)) {
if (!baseFrame || !overFrame || overFrame->GetNextSibling()) {
// report an error, encourage people to get their markups in order
haveError = true;
}
}
if (mContent->IsMathMLElement(nsGkAtoms::munderover_)) {
if (!baseFrame || !underFrame || !overFrame || overFrame->GetNextSibling()) {
// report an error, encourage people to get their markups in order
haveError = true;
}
}
if (haveError) {
if (aPlaceOrigin) {
ReportChildCountError();
}
return ReflowError(aDrawTarget, aDesiredSize);
}
GetReflowAndBoundingMetricsFor(baseFrame, baseSize, bmBase);
if (underFrame) {
GetReflowAndBoundingMetricsFor(underFrame, underSize, bmUnder);
}
if (overFrame) {
GetReflowAndBoundingMetricsFor(overFrame, overSize, bmOver);
}
nscoord onePixel = nsPresContext::CSSPixelsToAppUnits(1);
////////////////////
// Place Children
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);
nscoord xHeight = fm->XHeight();
nscoord oneDevPixel = fm->AppUnitsPerDevPixel();
gfxFont* mathFont = fm->GetThebesFontGroup()->GetFirstMathFont();
nscoord ruleThickness;
GetRuleThickness (aDrawTarget, fm, ruleThickness);
nscoord correction = 0;
GetItalicCorrection (bmBase, correction);
// there are 2 different types of placement depending on
// whether we want an accented under or not
nscoord underDelta1 = 0; // gap between base and underscript
nscoord underDelta2 = 0; // extra space beneath underscript
if (!NS_MATHML_EMBELLISH_IS_ACCENTUNDER(mEmbellishData.flags)) {
// Rule 13a, App. G, TeXbook
nscoord bigOpSpacing2, bigOpSpacing4, bigOpSpacing5, dummy;
GetBigOpSpacings (fm,
dummy, bigOpSpacing2,
dummy, bigOpSpacing4,
bigOpSpacing5);
if (mathFont) {
// XXXfredw The Open Type MATH table has some StretchStack* parameters
// that we may use when the base is a stretchy horizontal operator. See
// bug 963131.
bigOpSpacing2 =
mathFont->GetMathConstant(gfxFontEntry::LowerLimitGapMin,
oneDevPixel);
bigOpSpacing4 =
mathFont->GetMathConstant(gfxFontEntry::LowerLimitBaselineDropMin,
oneDevPixel);
bigOpSpacing5 = 0;
}
underDelta1 = std::max(bigOpSpacing2, (bigOpSpacing4 - bmUnder.ascent));
underDelta2 = bigOpSpacing5;
}
else {
// No corresponding rule in TeXbook - we are on our own here
// XXX tune the gap delta between base and underscript
// XXX Should we use Rule 10 like \underline does?
// XXXfredw Perhaps use the Underbar* parameters of the MATH table. See
// bug 963125.
underDelta1 = ruleThickness + onePixel/2;
underDelta2 = ruleThickness;
}
// empty under?
if (!(bmUnder.ascent + bmUnder.descent)) {
underDelta1 = 0;
underDelta2 = 0;
}
nscoord overDelta1 = 0; // gap between base and overscript
nscoord overDelta2 = 0; // extra space above overscript
if (!NS_MATHML_EMBELLISH_IS_ACCENTOVER(mEmbellishData.flags)) {
// Rule 13a, App. G, TeXbook
// XXXfredw The Open Type MATH table has some StretchStack* parameters
// that we may use when the base is a stretchy horizontal operator. See
// bug 963131.
nscoord bigOpSpacing1, bigOpSpacing3, bigOpSpacing5, dummy;
GetBigOpSpacings (fm,
bigOpSpacing1, dummy,
bigOpSpacing3, dummy,
bigOpSpacing5);
if (mathFont) {
// XXXfredw The Open Type MATH table has some StretchStack* parameters
// that we may use when the base is a stretchy horizontal operator. See
// bug 963131.
bigOpSpacing1 =
mathFont->GetMathConstant(gfxFontEntry::UpperLimitGapMin,
oneDevPixel);
bigOpSpacing3 =
mathFont->GetMathConstant(gfxFontEntry::UpperLimitBaselineRiseMin,
oneDevPixel);
bigOpSpacing5 = 0;
}
overDelta1 = std::max(bigOpSpacing1, (bigOpSpacing3 - bmOver.descent));
overDelta2 = bigOpSpacing5;
// XXX This is not a TeX rule...
// delta1 (as computed abvove) can become really big when bmOver.descent is
// negative, e.g., if the content is &OverBar. In such case, we use the height
if (bmOver.descent < 0)
overDelta1 = std::max(bigOpSpacing1, (bigOpSpacing3 - (bmOver.ascent + bmOver.descent)));
}
else {
// Rule 12, App. G, TeXbook
// We are going to modify this rule to make it more general.
// The idea behind Rule 12 in the TeXBook is to keep the accent
// as close to the base as possible, while ensuring that the
// distance between the *baseline* of the accent char and
// the *baseline* of the base is atleast x-height.
// The idea is that for normal use, we would like all the accents
// on a line to line up atleast x-height above the baseline
// if possible.
// When the ascent of the base is >= x-height,
// the baseline of the accent char is placed just above the base
// (specifically, the baseline of the accent char is placed
// above the baseline of the base by the ascent of the base).
// For ease of implementation,
// this assumes that the font-designer designs accents
// in such a way that the bottom of the accent is atleast x-height
// above its baseline, otherwise there will be collisions
// with the base. Also there should be proper padding between
// the bottom of the accent char and its baseline.
// The above rule may not be obvious from a first
// reading of rule 12 in the TeXBook !!!
// The mathml <mover> tag can use accent chars that
// do not follow this convention. So we modify TeX's rule
// so that TeX's rule gets subsumed for accents that follow
// TeX's convention,
// while also allowing accents that do not follow the convention :
// we try to keep the *bottom* of the accent char atleast x-height
// from the baseline of the base char. we also slap on an extra
// padding between the accent and base chars.
overDelta1 = ruleThickness + onePixel/2;
nscoord accentBaseHeight = xHeight;
if (mathFont) {
accentBaseHeight =
mathFont->GetMathConstant(gfxFontEntry::AccentBaseHeight,
oneDevPixel);
}
if (bmBase.ascent < accentBaseHeight) {
// also ensure at least accentBaseHeight above the baseline of the base
overDelta1 += accentBaseHeight - bmBase.ascent;
}
overDelta2 = ruleThickness;
}
// empty over?
if (!(bmOver.ascent + bmOver.descent)) {
overDelta1 = 0;
overDelta2 = 0;
}
nscoord dxBase = 0, dxOver = 0, dxUnder = 0;
nsAutoString valueAlign;
enum {
center,
left,
right
} alignPosition = center;
if (mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::align, valueAlign)) {
if (valueAlign.EqualsLiteral("left")) {
alignPosition = left;
} else if (valueAlign.EqualsLiteral("right")) {
alignPosition = right;
}
}
//////////
// pass 1, do what <mover> does: attach the overscript on the base
// Ad-hoc - This is to override fonts which have ready-made _accent_
// glyphs with negative lbearing and rbearing. We want to position
// the overscript ourselves
nscoord overWidth = bmOver.width;
if (!overWidth && (bmOver.rightBearing - bmOver.leftBearing > 0)) {
overWidth = bmOver.rightBearing - bmOver.leftBearing;
dxOver = -bmOver.leftBearing;
}
if (NS_MATHML_EMBELLISH_IS_ACCENTOVER(mEmbellishData.flags)) {
mBoundingMetrics.width = bmBase.width;
if (alignPosition == center) {
dxOver += correction;
}
}
else {
mBoundingMetrics.width = std::max(bmBase.width, overWidth);
if (alignPosition == center) {
dxOver += correction/2;
}
}
if (alignPosition == center) {
dxOver += (mBoundingMetrics.width - overWidth)/2;
dxBase = (mBoundingMetrics.width - bmBase.width)/2;
} else if (alignPosition == right) {
dxOver += mBoundingMetrics.width - overWidth;
dxBase = mBoundingMetrics.width - bmBase.width;
}
mBoundingMetrics.ascent =
bmBase.ascent + overDelta1 + bmOver.ascent + bmOver.descent;
mBoundingMetrics.descent = bmBase.descent;
mBoundingMetrics.leftBearing =
std::min(dxBase + bmBase.leftBearing, dxOver + bmOver.leftBearing);
mBoundingMetrics.rightBearing =
std::max(dxBase + bmBase.rightBearing, dxOver + bmOver.rightBearing);
//////////
// pass 2, do what <munder> does: attach the underscript on the previous
// result. We conceptually view the previous result as an "anynomous base"
// from where to attach the underscript. Hence if the underscript is empty,
// we should end up like <mover>. If the overscript is empty, we should
// end up like <munder>.
nsBoundingMetrics bmAnonymousBase = mBoundingMetrics;
nscoord ascentAnonymousBase =
std::max(mBoundingMetrics.ascent + overDelta2,
overSize.BlockStartAscent() + bmOver.descent +
overDelta1 + bmBase.ascent);
ascentAnonymousBase = std::max(ascentAnonymousBase,
baseSize.BlockStartAscent());
// Width of non-spacing marks is zero so use left and right bearing.
nscoord underWidth = bmUnder.width;
if (!underWidth) {
underWidth = bmUnder.rightBearing - bmUnder.leftBearing;
dxUnder = -bmUnder.leftBearing;
}
nscoord maxWidth = std::max(bmAnonymousBase.width, underWidth);
if (alignPosition == center &&
!NS_MATHML_EMBELLISH_IS_ACCENTUNDER(mEmbellishData.flags)) {
GetItalicCorrection(bmAnonymousBase, correction);
dxUnder += -correction/2;
}
nscoord dxAnonymousBase = 0;
if (alignPosition == center) {
dxUnder += (maxWidth - underWidth)/2;
dxAnonymousBase = (maxWidth - bmAnonymousBase.width)/2;
} else if (alignPosition == right) {
dxUnder += maxWidth - underWidth;
dxAnonymousBase = maxWidth - bmAnonymousBase.width;
}
// adjust the offsets of the real base and overscript since their
// final offsets should be relative to us...
dxOver += dxAnonymousBase;
dxBase += dxAnonymousBase;
mBoundingMetrics.width =
std::max(dxAnonymousBase + bmAnonymousBase.width, dxUnder + bmUnder.width);
// At this point, mBoundingMetrics.ascent = bmAnonymousBase.ascent
mBoundingMetrics.descent =
bmAnonymousBase.descent + underDelta1 + bmUnder.ascent + bmUnder.descent;
mBoundingMetrics.leftBearing =
std::min(dxAnonymousBase + bmAnonymousBase.leftBearing, dxUnder + bmUnder.leftBearing);
mBoundingMetrics.rightBearing =
std::max(dxAnonymousBase + bmAnonymousBase.rightBearing, dxUnder + bmUnder.rightBearing);
aDesiredSize.SetBlockStartAscent(ascentAnonymousBase);
aDesiredSize.Height() = aDesiredSize.BlockStartAscent() +
std::max(mBoundingMetrics.descent + underDelta2,
bmAnonymousBase.descent + underDelta1 + bmUnder.ascent +
underSize.Height() - underSize.BlockStartAscent());
aDesiredSize.Height() = std::max(aDesiredSize.Height(),
aDesiredSize.BlockStartAscent() +
baseSize.Height() - baseSize.BlockStartAscent());
aDesiredSize.Width() = mBoundingMetrics.width;
aDesiredSize.mBoundingMetrics = mBoundingMetrics;
mReference.x = 0;
mReference.y = aDesiredSize.BlockStartAscent();
if (aPlaceOrigin) {
nscoord dy;
// place overscript
if (overFrame) {
dy = aDesiredSize.BlockStartAscent() -
mBoundingMetrics.ascent + bmOver.ascent -
overSize.BlockStartAscent();
FinishReflowChild (overFrame, PresContext(), overSize, nullptr, dxOver, dy, 0);
}
// place base
dy = aDesiredSize.BlockStartAscent() - baseSize.BlockStartAscent();
FinishReflowChild (baseFrame, PresContext(), baseSize, nullptr, dxBase, dy, 0);
// place underscript
if (underFrame) {
dy = aDesiredSize.BlockStartAscent() +
mBoundingMetrics.descent - bmUnder.descent -
underSize.BlockStartAscent();
FinishReflowChild (underFrame, PresContext(), underSize, nullptr,
dxUnder, dy, 0);
}
}
return NS_OK;
}
void
nsVideoFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsVideoFrame::Reflow: availSize=%d,%d",
aReflowInput.AvailableWidth(),
aReflowInput.AvailableHeight()));
NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");
aStatus = NS_FRAME_COMPLETE;
const WritingMode myWM = aReflowInput.GetWritingMode();
nscoord contentBoxBSize = aReflowInput.ComputedBSize();
const nscoord borderBoxISize = aReflowInput.ComputedISize() +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
const bool isBSizeShrinkWrapping = (contentBoxBSize == NS_INTRINSICSIZE);
nscoord borderBoxBSize;
if (!isBSizeShrinkWrapping) {
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
nsMargin borderPadding = aReflowInput.ComputedPhysicalBorderPadding();
// Reflow the child frames. We may have up to three: an image
// frame (for the poster image), a container frame for the controls,
// and a container frame for the caption.
for (nsIFrame* child : mFrames) {
nsSize oldChildSize = child->GetSize();
if (child->GetContent() == mPosterImage) {
// Reflow the poster frame.
nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = imageFrame->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
imageFrame,
availableSize,
&cbSize);
nsRect posterRenderRect;
if (ShouldDisplayPoster()) {
posterRenderRect =
nsRect(nsPoint(borderPadding.left, borderPadding.top),
nsSize(aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
}
kidReflowInput.SetComputedWidth(posterRenderRect.width);
kidReflowInput.SetComputedHeight(posterRenderRect.height);
ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0, aStatus);
FinishReflowChild(imageFrame, aPresContext,
kidDesiredSize, &kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0);
// Android still uses XUL media controls & hence needs this XUL-friendly
// custom reflow code. This will go away in bug 1310907.
#ifdef ANDROID
} else if (child->GetContent() == mVideoControls) {
// Reflow the video controls frame.
nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
nsBoxFrame::LayoutChildAt(boxState,
child,
nsRect(borderPadding.left,
borderPadding.top,
aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
#endif // ANDROID
} else if (child->GetContent() == mCaptionDiv ||
child->GetContent() == mVideoControls) {
// Reflow the caption and control bar frames.
WritingMode wm = child->GetWritingMode();
LogicalSize availableSize = aReflowInput.ComputedSize(wm);
availableSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
child,
availableSize);
ReflowOutput kidDesiredSize(kidReflowInput);
ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
borderPadding.left, borderPadding.top, 0, aStatus);
if (child->GetContent() == mVideoControls && isBSizeShrinkWrapping) {
// Resolve our own BSize based on the controls' size in the same axis.
contentBoxBSize = myWM.IsOrthogonalTo(wm) ?
kidDesiredSize.ISize(wm) : kidDesiredSize.BSize(wm);
}
FinishReflowChild(child, aPresContext,
kidDesiredSize, &kidReflowInput,
borderPadding.left, borderPadding.top, 0);
}
if (child->GetContent() == mVideoControls && child->GetSize() != oldChildSize) {
RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
nsContentUtils::AddScriptRunner(event);
}
}
if (isBSizeShrinkWrapping) {
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We didn't get a BSize from our intrinsic size/ratio, nor did we
// get one from our controls. Just use BSize of 0.
contentBoxBSize = 0;
}
contentBoxBSize = NS_CSS_MINMAX(contentBoxBSize,
aReflowInput.ComputedMinBSize(),
aReflowInput.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aMetrics.SetSize(myWM, logicalDesiredSize);
aMetrics.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aMetrics);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsVideoFrame::Reflow: size=%d,%d",
aMetrics.Width(), aMetrics.Height()));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
nsresult
nsMathMLmfracFrame::PlaceInternal(DrawTarget* aDrawTarget,
bool aPlaceOrigin,
ReflowOutput& aDesiredSize,
bool aWidthOnly)
{
////////////////////////////////////
// Get the children's desired sizes
nsBoundingMetrics bmNum, bmDen;
ReflowOutput sizeNum(aDesiredSize.GetWritingMode());
ReflowOutput sizeDen(aDesiredSize.GetWritingMode());
nsIFrame* frameDen = nullptr;
nsIFrame* frameNum = mFrames.FirstChild();
if (frameNum)
frameDen = frameNum->GetNextSibling();
if (!frameNum || !frameDen || frameDen->GetNextSibling()) {
// report an error, encourage people to get their markups in order
if (aPlaceOrigin) {
ReportChildCountError();
}
return ReflowError(aDrawTarget, aDesiredSize);
}
GetReflowAndBoundingMetricsFor(frameNum, sizeNum, bmNum);
GetReflowAndBoundingMetricsFor(frameDen, sizeDen, bmDen);
nsPresContext* presContext = PresContext();
nscoord onePixel = nsPresContext::CSSPixelsToAppUnits(1);
float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);
nscoord defaultRuleThickness, axisHeight;
nscoord oneDevPixel = fm->AppUnitsPerDevPixel();
gfxFont* mathFont = fm->GetThebesFontGroup()->GetFirstMathFont();
if (mathFont) {
defaultRuleThickness =
mathFont->GetMathConstant(gfxFontEntry::FractionRuleThickness,
oneDevPixel);
} else {
GetRuleThickness(aDrawTarget, fm, defaultRuleThickness);
}
GetAxisHeight(aDrawTarget, fm, axisHeight);
bool outermostEmbellished = false;
if (mEmbellishData.coreFrame) {
nsEmbellishData parentData;
GetEmbellishDataFrom(GetParent(), parentData);
outermostEmbellished = parentData.coreFrame != mEmbellishData.coreFrame;
}
// see if the linethickness attribute is there
nsAutoString value;
mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::linethickness_, value);
mLineThickness = CalcLineThickness(presContext, mStyleContext, value,
onePixel, defaultRuleThickness,
fontSizeInflation);
// bevelled attribute
mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::bevelled_, value);
mIsBevelled = value.EqualsLiteral("true");
bool displayStyle = StyleFont()->mMathDisplay == NS_MATHML_DISPLAYSTYLE_BLOCK;
if (!mIsBevelled) {
mLineRect.height = mLineThickness;
// by default, leave at least one-pixel padding at either end, and add
// lspace & rspace that may come from <mo> if we are an outermost
// embellished container (we fetch values from the core since they may use
// units that depend on style data, and style changes could have occurred
// in the core since our last visit there)
nscoord leftSpace = onePixel;
nscoord rightSpace = onePixel;
if (outermostEmbellished) {
nsEmbellishData coreData;
GetEmbellishDataFrom(mEmbellishData.coreFrame, coreData);
leftSpace += StyleVisibility()->mDirection ?
coreData.trailingSpace : coreData.leadingSpace;
rightSpace += StyleVisibility()->mDirection ?
coreData.leadingSpace : coreData.trailingSpace;
}
nscoord actualRuleThickness = mLineThickness;
//////////////////
// Get shifts
nscoord numShift = 0;
nscoord denShift = 0;
// Rule 15b, App. G, TeXbook
nscoord numShift1, numShift2, numShift3;
nscoord denShift1, denShift2;
GetNumeratorShifts(fm, numShift1, numShift2, numShift3);
GetDenominatorShifts(fm, denShift1, denShift2);
if (0 == actualRuleThickness) {
numShift = displayStyle ? numShift1 : numShift3;
denShift = displayStyle ? denShift1 : denShift2;
if (mathFont) {
numShift = mathFont->
GetMathConstant(displayStyle ?
gfxFontEntry::StackTopDisplayStyleShiftUp :
gfxFontEntry::StackTopShiftUp,
oneDevPixel);
denShift = mathFont->
GetMathConstant(displayStyle ?
gfxFontEntry::StackBottomDisplayStyleShiftDown :
gfxFontEntry::StackBottomShiftDown,
oneDevPixel);
}
} else {
numShift = displayStyle ? numShift1 : numShift2;
denShift = displayStyle ? denShift1 : denShift2;
if (mathFont) {
numShift = mathFont->
GetMathConstant(displayStyle ?
gfxFontEntry::FractionNumeratorDisplayStyleShiftUp :
gfxFontEntry::FractionNumeratorShiftUp,
oneDevPixel);
denShift = mathFont->
GetMathConstant(
displayStyle ?
gfxFontEntry::FractionDenominatorDisplayStyleShiftDown :
gfxFontEntry::FractionDenominatorShiftDown,
oneDevPixel);
}
}
if (0 == actualRuleThickness) {
// Rule 15c, App. G, TeXbook
// min clearance between numerator and denominator
nscoord minClearance = displayStyle ?
7 * defaultRuleThickness : 3 * defaultRuleThickness;
if (mathFont) {
minClearance =
mathFont->GetMathConstant(displayStyle ?
gfxFontEntry::StackDisplayStyleGapMin :
gfxFontEntry::StackGapMin,
oneDevPixel);
}
// Factor in axis height
// http://www.mathml-association.org/MathMLinHTML5/S3.html#SS3.SSS2
numShift += axisHeight;
denShift += axisHeight;
nscoord actualClearance =
(numShift - bmNum.descent) - (bmDen.ascent - denShift);
// actualClearance should be >= minClearance
if (actualClearance < minClearance) {
nscoord halfGap = (minClearance - actualClearance)/2;
numShift += halfGap;
denShift += halfGap;
}
}
else {
// Rule 15d, App. G, TeXbook
// min clearance between numerator or denominator and middle of bar
// TeX has a different interpretation of the thickness.
// Try $a \above10pt b$ to see. Here is what TeX does:
// minClearance = displayStyle ?
// 3 * actualRuleThickness : actualRuleThickness;
// we slightly depart from TeX here. We use the defaultRuleThickness instead
// of the value coming from the linethickness attribute, i.e., we recover what
// TeX does if the user hasn't set linethickness. But when the linethickness
// is set, we avoid the wide gap problem.
nscoord minClearanceNum = displayStyle ?
3 * defaultRuleThickness : defaultRuleThickness + onePixel;
nscoord minClearanceDen = minClearanceNum;
if (mathFont) {
minClearanceNum = mathFont->
GetMathConstant(displayStyle ?
gfxFontEntry::FractionNumDisplayStyleGapMin :
gfxFontEntry::FractionNumeratorGapMin,
oneDevPixel);
minClearanceDen = mathFont->
GetMathConstant(displayStyle ?
gfxFontEntry::FractionDenomDisplayStyleGapMin :
gfxFontEntry::FractionDenominatorGapMin,
oneDevPixel);
}
// adjust numShift to maintain minClearanceNum if needed
nscoord actualClearanceNum =
(numShift - bmNum.descent) - (axisHeight + actualRuleThickness/2);
if (actualClearanceNum < minClearanceNum) {
numShift += (minClearanceNum - actualClearanceNum);
}
// adjust denShift to maintain minClearanceDen if needed
nscoord actualClearanceDen =
(axisHeight - actualRuleThickness/2) - (bmDen.ascent - denShift);
if (actualClearanceDen < minClearanceDen) {
denShift += (minClearanceDen - actualClearanceDen);
}
}
//////////////////
// Place Children
// XXX Need revisiting the width. TeX uses the exact width
// e.g. in $$\huge\frac{\displaystyle\int}{i}$$
nscoord width = std::max(bmNum.width, bmDen.width);
nscoord dxNum = leftSpace + (width - sizeNum.Width())/2;
nscoord dxDen = leftSpace + (width - sizeDen.Width())/2;
width += leftSpace + rightSpace;
// see if the numalign attribute is there
mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::numalign_, value);
if (value.EqualsLiteral("left"))
dxNum = leftSpace;
else if (value.EqualsLiteral("right"))
dxNum = width - rightSpace - sizeNum.Width();
// see if the denomalign attribute is there
mContent->GetAttr(kNameSpaceID_None, nsGkAtoms::denomalign_, value);
if (value.EqualsLiteral("left"))
dxDen = leftSpace;
else if (value.EqualsLiteral("right"))
dxDen = width - rightSpace - sizeDen.Width();
mBoundingMetrics.rightBearing =
std::max(dxNum + bmNum.rightBearing, dxDen + bmDen.rightBearing);
if (mBoundingMetrics.rightBearing < width - rightSpace)
mBoundingMetrics.rightBearing = width - rightSpace;
mBoundingMetrics.leftBearing =
std::min(dxNum + bmNum.leftBearing, dxDen + bmDen.leftBearing);
if (mBoundingMetrics.leftBearing > leftSpace)
mBoundingMetrics.leftBearing = leftSpace;
mBoundingMetrics.ascent = bmNum.ascent + numShift;
mBoundingMetrics.descent = bmDen.descent + denShift;
mBoundingMetrics.width = width;
aDesiredSize.SetBlockStartAscent(sizeNum.BlockStartAscent() + numShift);
aDesiredSize.Height() = aDesiredSize.BlockStartAscent() +
sizeDen.Height() - sizeDen.BlockStartAscent() + denShift;
aDesiredSize.Width() = mBoundingMetrics.width;
aDesiredSize.mBoundingMetrics = mBoundingMetrics;
mReference.x = 0;
mReference.y = aDesiredSize.BlockStartAscent();
if (aPlaceOrigin) {
nscoord dy;
// place numerator
dy = 0;
FinishReflowChild(frameNum, presContext, sizeNum, nullptr, dxNum, dy, 0);
// place denominator
dy = aDesiredSize.Height() - sizeDen.Height();
FinishReflowChild(frameDen, presContext, sizeDen, nullptr, dxDen, dy, 0);
// place the fraction bar - dy is top of bar
dy = aDesiredSize.BlockStartAscent() - (axisHeight + actualRuleThickness/2);
mLineRect.SetRect(leftSpace, dy, width - (leftSpace + rightSpace),
actualRuleThickness);
}
} else {
nscoord numShift = 0.0;
nscoord denShift = 0.0;
nscoord padding = 3 * defaultRuleThickness;
nscoord slashRatio = 3;
// Define the constant used in the expression of the maximum width
nscoord em = fm->EmHeight();
nscoord slashMaxWidthConstant = 2 * em;
// For large line thicknesses the minimum slash height is limited to the
// largest expected height of a fraction
nscoord slashMinHeight = slashRatio *
std::min(2 * mLineThickness, slashMaxWidthConstant);
nscoord leadingSpace = padding;
nscoord trailingSpace = padding;
if (outermostEmbellished) {
nsEmbellishData coreData;
GetEmbellishDataFrom(mEmbellishData.coreFrame, coreData);
leadingSpace += coreData.leadingSpace;
trailingSpace += coreData.trailingSpace;
}
nscoord delta;
// ___________
// | | /
// {|-NUMERATOR-| /
// {|___________| S
// { L
// numShift{ A
// ------------------------------------------------------- baseline
// S _____________ } denShift
// H | |}
// / |-DENOMINATOR-|}
// / |_____________|
//
// first, ensure that the top of the numerator is at least as high as the
// top of the denominator (and the reverse for the bottoms)
delta = std::max(bmDen.ascent - bmNum.ascent,
bmNum.descent - bmDen.descent) / 2;
if (delta > 0) {
numShift += delta;
denShift += delta;
}
if (StyleFont()->mMathDisplay == NS_MATHML_DISPLAYSTYLE_BLOCK) {
delta = std::min(bmDen.ascent + bmDen.descent,
bmNum.ascent + bmNum.descent) / 2;
numShift += delta;
denShift += delta;
} else {
nscoord xHeight = fm->XHeight();
numShift += xHeight / 2;
denShift += xHeight / 4;
}
// Set the ascent/descent of our BoundingMetrics.
mBoundingMetrics.ascent = bmNum.ascent + numShift;
mBoundingMetrics.descent = bmDen.descent + denShift;
// At this point the height of the slash is
// mBoundingMetrics.ascent + mBoundingMetrics.descent
// Ensure that it is greater than slashMinHeight
delta = (slashMinHeight -
(mBoundingMetrics.ascent + mBoundingMetrics.descent)) / 2;
if (delta > 0) {
mBoundingMetrics.ascent += delta;
mBoundingMetrics.descent += delta;
}
// Set the width of the slash
if (aWidthOnly) {
mLineRect.width = mLineThickness + slashMaxWidthConstant;
} else {
mLineRect.width = mLineThickness +
std::min(slashMaxWidthConstant,
(mBoundingMetrics.ascent + mBoundingMetrics.descent) /
slashRatio);
}
// Set horizontal bounding metrics
if (StyleVisibility()->mDirection) {
mBoundingMetrics.leftBearing = trailingSpace + bmDen.leftBearing;
mBoundingMetrics.rightBearing = trailingSpace + bmDen.width + mLineRect.width + bmNum.rightBearing;
} else {
mBoundingMetrics.leftBearing = leadingSpace + bmNum.leftBearing;
mBoundingMetrics.rightBearing = leadingSpace + bmNum.width + mLineRect.width + bmDen.rightBearing;
}
mBoundingMetrics.width =
leadingSpace + bmNum.width + mLineRect.width + bmDen.width +
trailingSpace;
// Set aDesiredSize
aDesiredSize.SetBlockStartAscent(mBoundingMetrics.ascent + padding);
aDesiredSize.Height() =
mBoundingMetrics.ascent + mBoundingMetrics.descent + 2 * padding;
aDesiredSize.Width() = mBoundingMetrics.width;
aDesiredSize.mBoundingMetrics = mBoundingMetrics;
mReference.x = 0;
mReference.y = aDesiredSize.BlockStartAscent();
if (aPlaceOrigin) {
nscoord dx, dy;
// place numerator
dx = MirrorIfRTL(aDesiredSize.Width(), sizeNum.Width(),
leadingSpace);
dy = aDesiredSize.BlockStartAscent() - numShift - sizeNum.BlockStartAscent();
FinishReflowChild(frameNum, presContext, sizeNum, nullptr, dx, dy, 0);
// place the fraction bar
dx = MirrorIfRTL(aDesiredSize.Width(), mLineRect.width,
leadingSpace + bmNum.width);
dy = aDesiredSize.BlockStartAscent() - mBoundingMetrics.ascent;
mLineRect.SetRect(dx, dy,
mLineRect.width, aDesiredSize.Height() - 2 * padding);
// place denominator
dx = MirrorIfRTL(aDesiredSize.Width(), sizeDen.Width(),
leadingSpace + bmNum.width + mLineRect.width);
dy = aDesiredSize.BlockStartAscent() + denShift - sizeDen.BlockStartAscent();
FinishReflowChild(frameDen, presContext, sizeDen, nullptr, dx, dy, 0);
}
}
return NS_OK;
}
void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
ReflowOutput& aButtonDesiredSize,
const ReflowInput& aButtonReflowInput,
nsIFrame* aFirstKid)
{
WritingMode wm = GetWritingMode();
LogicalSize availSize = aButtonReflowInput.ComputedSize(wm);
availSize.BSize(wm) = NS_INTRINSICSIZE;
// Buttons have some bonus renderer-determined border/padding,
// which occupies part of the button's content-box area:
LogicalMargin focusPadding =
LogicalMargin(wm, mRenderer.GetAddedButtonBorderAndPadding());
// See whether out availSize's inline-size is big enough. If it's
// smaller than our intrinsic min iSize, that means that the kid
// wouldn't really fit. In that case, we overflow into our internal
// focuspadding (which other browsers don't have) so that there's a
// little more space for it.
// Note that GetMinISize includes the focusPadding.
nscoord IOverflow = GetMinISize(aButtonReflowInput.mRenderingContext) -
aButtonReflowInput.ComputedISize();
nscoord IFocusPadding = focusPadding.IStartEnd(wm);
nscoord focusPaddingReduction = std::min(IFocusPadding,
std::max(IOverflow, 0));
if (focusPaddingReduction > 0) {
nscoord startReduction = focusPadding.IStart(wm);
if (focusPaddingReduction != IFocusPadding) {
startReduction = NSToCoordRound(startReduction *
(float(focusPaddingReduction) /
float(IFocusPadding)));
}
focusPadding.IStart(wm) -= startReduction;
focusPadding.IEnd(wm) -= focusPaddingReduction - startReduction;
}
// shorthand for a value we need to use in a bunch of places
const LogicalMargin& clbp = aButtonReflowInput.ComputedLogicalBorderPadding();
// Indent the child inside us by the focus border. We must do this separate
// from the regular border.
availSize.ISize(wm) -= focusPadding.IStartEnd(wm);
LogicalPoint childPos(wm);
childPos.I(wm) = focusPadding.IStart(wm) + clbp.IStart(wm);
availSize.ISize(wm) = std::max(availSize.ISize(wm), 0);
// Give child a clone of the button's reflow state, with height/width reduced
// by focusPadding, so that descendants with height:100% don't protrude.
ReflowInput adjustedButtonReflowInput =
CloneReflowInputWithReducedContentBox(aButtonReflowInput, focusPadding);
ReflowInput contentsReflowInput(aPresContext,
adjustedButtonReflowInput,
aFirstKid, availSize);
nsReflowStatus contentsReflowStatus;
ReflowOutput contentsDesiredSize(aButtonReflowInput);
childPos.B(wm) = 0; // This will be set properly later, after reflowing the
// child to determine its size.
// We just pass a dummy containerSize here, as the child will be
// repositioned later by FinishReflowChild.
nsSize dummyContainerSize;
ReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, contentsReflowInput,
wm, childPos, dummyContainerSize, 0, contentsReflowStatus);
MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
"We gave button-contents frame unconstrained available height, "
"so it should be complete");
// Compute the button's content-box size:
LogicalSize buttonContentBox(wm);
if (aButtonReflowInput.ComputedBSize() != NS_INTRINSICSIZE) {
// Button has a fixed block-size -- that's its content-box bSize.
buttonContentBox.BSize(wm) = aButtonReflowInput.ComputedBSize();
} else {
// Button is intrinsically sized -- it should shrinkwrap the
// button-contents' bSize, plus any focus-padding space:
buttonContentBox.BSize(wm) =
contentsDesiredSize.BSize(wm) + focusPadding.BStartEnd(wm);
// Make sure we obey min/max-bSize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aButtonReflowInput.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since mComputedMaxBSize and
// mComputedMinBSize are content bSizes.
buttonContentBox.BSize(wm) =
NS_CSS_MINMAX(buttonContentBox.BSize(wm),
aButtonReflowInput.ComputedMinBSize(),
aButtonReflowInput.ComputedMaxBSize());
}
if (aButtonReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
buttonContentBox.ISize(wm) = aButtonReflowInput.ComputedISize();
} else {
buttonContentBox.ISize(wm) =
contentsDesiredSize.ISize(wm) + focusPadding.IStartEnd(wm);
buttonContentBox.ISize(wm) =
NS_CSS_MINMAX(buttonContentBox.ISize(wm),
aButtonReflowInput.ComputedMinISize(),
aButtonReflowInput.ComputedMaxISize());
}
// Center child in the block-direction in the button
// (technically, inside of the button's focus-padding area)
nscoord extraSpace =
buttonContentBox.BSize(wm) - focusPadding.BStartEnd(wm) -
contentsDesiredSize.BSize(wm);
childPos.B(wm) = std::max(0, extraSpace / 2);
// Adjust childPos.B() to be in terms of the button's frame-rect, instead of
// its focus-padding rect:
childPos.B(wm) += focusPadding.BStart(wm) + clbp.BStart(wm);
nsSize containerSize =
(buttonContentBox + clbp.Size(wm)).GetPhysicalSize(wm);
// Place the child
FinishReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, &contentsReflowInput,
wm, childPos, containerSize, 0);
// Make sure we have a useful 'ascent' value for the child
if (contentsDesiredSize.BlockStartAscent() ==
ReflowOutput::ASK_FOR_BASELINE) {
WritingMode wm = aButtonReflowInput.GetWritingMode();
contentsDesiredSize.SetBlockStartAscent(aFirstKid->GetLogicalBaseline(wm));
}
// OK, we're done with the child frame.
// Use what we learned to populate the button frame's reflow metrics.
// * Button's height & width are content-box size + border-box contribution:
aButtonDesiredSize.SetSize(wm,
LogicalSize(wm, aButtonReflowInput.ComputedISize() + clbp.IStartEnd(wm),
buttonContentBox.BSize(wm) + clbp.BStartEnd(wm)));
// * Button's ascent is its child's ascent, plus the child's block-offset
// within our frame... unless it's orthogonal, in which case we'll use the
// contents inline-size as an approximation for now.
// XXX is there a better strategy? should we include border-padding?
if (aButtonDesiredSize.GetWritingMode().IsOrthogonalTo(wm)) {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.ISize(wm));
} else {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.BlockStartAscent() +
childPos.B(wm));
}
aButtonDesiredSize.SetOverflowAreasToDesiredBounds();
}
