void
nsSimplePageSequenceFrame::SetDesiredSize(ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nscoord aWidth,
nscoord aHeight)
{
// Aim to fill the whole size of the document, not only so we
// can act as a background in print preview but also handle overflow
// in child page frames correctly.
// Use availableISize so we don't cause a needless horizontal scrollbar.
WritingMode wm = aReflowInput.GetWritingMode();
nscoord scaledWidth = aWidth * PresContext()->GetPrintPreviewScale();
nscoord scaledHeight = aHeight * PresContext()->GetPrintPreviewScale();
nscoord scaledISize = (wm.IsVertical() ? scaledHeight : scaledWidth);
nscoord scaledBSize = (wm.IsVertical() ? scaledWidth : scaledHeight);
aDesiredSize.ISize(wm) = std::max(scaledISize, aReflowInput.AvailableISize());
aDesiredSize.BSize(wm) = std::max(scaledBSize, aReflowInput.ComputedBSize());
}
void
BRFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("BRFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize finalSize(wm);
finalSize.BSize(wm) = 0; // BR frames with block size 0 are ignored in quirks
// mode by nsLineLayout::VerticalAlignFrames .
// However, it's not always 0. See below.
finalSize.ISize(wm) = 0;
aMetrics.SetBlockStartAscent(0);
// Only when the BR is operating in a line-layout situation will it
// behave like a BR. Additionally, we suppress breaks from BR inside
// of ruby frames. To determine if we're inside ruby, we have to rely
// on the *parent's* ShouldSuppressLineBreak() method, instead of our
// own, because we may have custom "display" value that makes our
// ShouldSuppressLineBreak() return false.
nsLineLayout* ll = aReflowInput.mLineLayout;
if (ll && !GetParent()->StyleContext()->ShouldSuppressLineBreak()) {
// Note that the compatibility mode check excludes AlmostStandards
// mode, since this is the inline box model. See bug 161691.
if ( ll->LineIsEmpty() ||
aPresContext->CompatibilityMode() == eCompatibility_FullStandards ) {
// The line is logically empty; any whitespace is trimmed away.
//
// If this frame is going to terminate the line we know
// that nothing else will go on the line. Therefore, in this
// case, we provide some height for the BR frame so that it
// creates some vertical whitespace. It's necessary to use the
// line-height rather than the font size because the
// quirks-mode fix that doesn't apply the block's min
// line-height makes this necessary to make BR cause a line
// of the full line-height
// We also do this in strict mode because BR should act like a
// normal inline frame. That line-height is used is important
// here for cases where the line-height is less than 1.
RefPtr<nsFontMetrics> fm =
nsLayoutUtils::GetInflatedFontMetricsForFrame(this);
if (fm) {
nscoord logicalHeight = aReflowInput.CalcLineHeight();
finalSize.BSize(wm) = logicalHeight;
aMetrics.SetBlockStartAscent(nsLayoutUtils::GetCenteredFontBaseline(
fm, logicalHeight, wm.IsLineInverted()));
}
else {
aMetrics.SetBlockStartAscent(aMetrics.BSize(wm) = 0);
}
// XXX temporary until I figure out a better solution; see the
// code in nsLineLayout::VerticalAlignFrames that zaps minY/maxY
// if the width is zero.
// XXX This also fixes bug 10036!
// Warning: nsTextControlFrame::CalculateSizeStandard depends on
// the following line, see bug 228752.
// The code below in AddInlinePrefISize also adds 1 appunit to width
finalSize.ISize(wm) = 1;
}
// Return our reflow status
uint32_t breakType = aReflowInput.mStyleDisplay->PhysicalBreakType(wm);
if (NS_STYLE_CLEAR_NONE == breakType) {
breakType = NS_STYLE_CLEAR_LINE;
}
aStatus = NS_INLINE_BREAK | NS_INLINE_BREAK_AFTER |
NS_INLINE_MAKE_BREAK_TYPE(breakType);
ll->SetLineEndsInBR(true);
}
else {
aStatus = NS_FRAME_COMPLETE;
}
aMetrics.SetSize(wm, finalSize);
aMetrics.SetOverflowAreasToDesiredBounds();
mAscent = aMetrics.BlockStartAscent();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
void
nsTableCellFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTableCellFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
FirstInFlow()->AddStateBits(NS_TABLE_CELL_HAD_SPECIAL_REFLOW);
}
// see if a special bsize reflow needs to occur due to having a pct height
nsTableFrame::CheckRequestSpecialBSizeReflow(aReflowInput);
aStatus = NS_FRAME_COMPLETE;
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize availSize(wm, aReflowInput.AvailableISize(),
aReflowInput.AvailableBSize());
LogicalMargin borderPadding = aReflowInput.ComputedLogicalPadding();
LogicalMargin border = GetBorderWidth(wm);
borderPadding += border;
// reduce available space by insets, if we're in a constrained situation
availSize.ISize(wm) -= borderPadding.IStartEnd(wm);
if (NS_UNCONSTRAINEDSIZE != availSize.BSize(wm)) {
availSize.BSize(wm) -= borderPadding.BStartEnd(wm);
}
// Try to reflow the child into the available space. It might not
// fit or might need continuing.
if (availSize.BSize(wm) < 0) {
availSize.BSize(wm) = 1;
}
ReflowOutput kidSize(wm, aDesiredSize.mFlags);
kidSize.ClearSize();
SetPriorAvailISize(aReflowInput.AvailableISize());
nsIFrame* firstKid = mFrames.FirstChild();
NS_ASSERTION(firstKid, "Frame construction error, a table cell always has an inner cell frame");
nsTableFrame* tableFrame = GetTableFrame();
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
const_cast<ReflowInput&>(aReflowInput).
SetComputedBSize(BSize(wm) - borderPadding.BStartEnd(wm));
DISPLAY_REFLOW_CHANGE();
}
else if (aPresContext->IsPaginated()) {
nscoord computedUnpaginatedBSize =
CalcUnpaginatedBSize((nsTableCellFrame&)*this,
*tableFrame, borderPadding.BStartEnd(wm));
if (computedUnpaginatedBSize > 0) {
const_cast<ReflowInput&>(aReflowInput).SetComputedBSize(computedUnpaginatedBSize);
DISPLAY_REFLOW_CHANGE();
}
}
else {
SetHasPctOverBSize(false);
}
WritingMode kidWM = firstKid->GetWritingMode();
ReflowInput kidReflowInput(aPresContext, aReflowInput, firstKid,
availSize.ConvertTo(kidWM, wm));
// Don't be a percent height observer if we're in the middle of
// special-bsize reflow, in case we get an accidental NotifyPercentBSize()
// call (which we shouldn't honor during special-bsize reflow)
if (!aReflowInput.mFlags.mSpecialBSizeReflow) {
// mPercentBSizeObserver is for children of cells in quirks mode,
// but only those than are tables in standards mode. NeedsToObserve
// will determine how far this is propagated to descendants.
kidReflowInput.mPercentBSizeObserver = this;
}
// Don't propagate special bsize reflow state to our kids
kidReflowInput.mFlags.mSpecialBSizeReflow = false;
if (aReflowInput.mFlags.mSpecialBSizeReflow ||
FirstInFlow()->HasAnyStateBits(NS_TABLE_CELL_HAD_SPECIAL_REFLOW)) {
// We need to force the kid to have mBResize set if we've had a
// special reflow in the past, since the non-special reflow needs to
// resize back to what it was without the special bsize reflow.
kidReflowInput.SetBResize(true);
}
nsSize containerSize =
aReflowInput.ComputedSizeAsContainerIfConstrained();
LogicalPoint kidOrigin(wm, borderPadding.IStart(wm),
borderPadding.BStart(wm));
nsRect origRect = firstKid->GetRect();
nsRect origVisualOverflow = firstKid->GetVisualOverflowRect();
bool firstReflow = firstKid->HasAnyStateBits(NS_FRAME_FIRST_REFLOW);
ReflowChild(firstKid, aPresContext, kidSize, kidReflowInput,
wm, kidOrigin, containerSize, 0, aStatus);
if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
// Don't pass OVERFLOW_INCOMPLETE through tables until they can actually handle it
//XXX should paginate overflow as overflow, but not in this patch (bug 379349)
NS_FRAME_SET_INCOMPLETE(aStatus);
printf("Set table cell incomplete %p\n", static_cast<void*>(this));
}
// XXXbz is this invalidate actually needed, really?
if (HasAnyStateBits(NS_FRAME_IS_DIRTY)) {
InvalidateFrameSubtree();
}
#ifdef DEBUG
DebugCheckChildSize(firstKid, kidSize);
#endif
// 0 dimensioned cells need to be treated specially in Standard/NavQuirks mode
// see testcase "emptyCells.html"
nsIFrame* prevInFlow = GetPrevInFlow();
bool isEmpty;
if (prevInFlow) {
isEmpty = static_cast<nsTableCellFrame*>(prevInFlow)->GetContentEmpty();
} else {
isEmpty = !CellHasVisibleContent(kidSize.Height(), tableFrame, firstKid);
}
SetContentEmpty(isEmpty);
// Place the child
FinishReflowChild(firstKid, aPresContext, kidSize, &kidReflowInput,
wm, kidOrigin, containerSize, 0);
nsTableFrame::InvalidateTableFrame(firstKid, origRect, origVisualOverflow,
firstReflow);
// first, compute the bsize which can be set w/o being restricted by
// available bsize
LogicalSize cellSize(wm);
cellSize.BSize(wm) = kidSize.BSize(wm);
if (NS_UNCONSTRAINEDSIZE != cellSize.BSize(wm)) {
cellSize.BSize(wm) += borderPadding.BStartEnd(wm);
}
// next determine the cell's isize
cellSize.ISize(wm) = kidSize.ISize(wm); // at this point, we've factored in the cell's style attributes
// factor in border and padding
if (NS_UNCONSTRAINEDSIZE != cellSize.ISize(wm)) {
cellSize.ISize(wm) += borderPadding.IStartEnd(wm);
}
// set the cell's desired size and max element size
aDesiredSize.SetSize(wm, cellSize);
// the overflow area will be computed when BlockDirAlignChild() gets called
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
if (aDesiredSize.BSize(wm) > BSize(wm)) {
// set a bit indicating that the pct bsize contents exceeded
// the height that they could honor in the pass 2 reflow
SetHasPctOverBSize(true);
}
if (NS_UNCONSTRAINEDSIZE == aReflowInput.AvailableBSize()) {
aDesiredSize.BSize(wm) = BSize(wm);
}
}
// If our parent is in initial reflow, it'll handle invalidating our
// entire overflow rect.
if (!GetParent()->HasAnyStateBits(NS_FRAME_FIRST_REFLOW) &&
nsSize(aDesiredSize.Width(), aDesiredSize.Height()) != mRect.Size()) {
InvalidateFrame();
}
// remember the desired size for this reflow
SetDesiredSize(aDesiredSize);
// Any absolutely-positioned children will get reflowed in
// nsFrame::FixupPositionedTableParts in another pass, so propagate our
// dirtiness to them before our parent clears our dirty bits.
PushDirtyBitToAbsoluteFrames();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsFirstLetterFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aReflowStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsFirstLetterFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aReflowStatus);
// Grab overflow list
DrainOverflowFrames(aPresContext);
nsIFrame* kid = mFrames.FirstChild();
// Setup reflow state for our child
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize availSize = aReflowInput.AvailableSize();
const LogicalMargin& bp = aReflowInput.ComputedLogicalBorderPadding();
NS_ASSERTION(availSize.ISize(wm) != NS_UNCONSTRAINEDSIZE,
"should no longer use unconstrained inline size");
availSize.ISize(wm) -= bp.IStartEnd(wm);
if (NS_UNCONSTRAINEDSIZE != availSize.BSize(wm)) {
availSize.BSize(wm) -= bp.BStartEnd(wm);
}
WritingMode lineWM = aMetrics.GetWritingMode();
ReflowOutput kidMetrics(lineWM);
// Reflow the child
if (!aReflowInput.mLineLayout) {
// When there is no lineLayout provided, we provide our own. The
// only time that the first-letter-frame is not reflowing in a
// line context is when its floating.
WritingMode kidWritingMode = WritingModeForLine(wm, kid);
LogicalSize kidAvailSize = availSize.ConvertTo(kidWritingMode, wm);
ReflowInput rs(aPresContext, aReflowInput, kid, kidAvailSize);
nsLineLayout ll(aPresContext, nullptr, &aReflowInput, nullptr, nullptr);
ll.BeginLineReflow(bp.IStart(wm), bp.BStart(wm),
availSize.ISize(wm), NS_UNCONSTRAINEDSIZE,
false, true, kidWritingMode,
nsSize(aReflowInput.AvailableWidth(),
aReflowInput.AvailableHeight()));
rs.mLineLayout = ≪
ll.SetInFirstLetter(true);
ll.SetFirstLetterStyleOK(true);
kid->Reflow(aPresContext, kidMetrics, rs, aReflowStatus);
ll.EndLineReflow();
ll.SetInFirstLetter(false);
// In the floating first-letter case, we need to set this ourselves;
// nsLineLayout::BeginSpan will set it in the other case
mBaseline = kidMetrics.BlockStartAscent();
// Place and size the child and update the output metrics
LogicalSize convertedSize = kidMetrics.Size(lineWM).ConvertTo(wm, lineWM);
kid->SetRect(nsRect(bp.IStart(wm), bp.BStart(wm),
convertedSize.ISize(wm), convertedSize.BSize(wm)));
kid->FinishAndStoreOverflow(&kidMetrics);
kid->DidReflow(aPresContext, nullptr, nsDidReflowStatus::FINISHED);
convertedSize.ISize(wm) += bp.IStartEnd(wm);
convertedSize.BSize(wm) += bp.BStartEnd(wm);
aMetrics.SetSize(wm, convertedSize);
aMetrics.SetBlockStartAscent(kidMetrics.BlockStartAscent() +
bp.BStart(wm));
// Ensure that the overflow rect contains the child textframe's
// overflow rect.
// Note that if this is floating, the overline/underline drawable
// area is in the overflow rect of the child textframe.
aMetrics.UnionOverflowAreasWithDesiredBounds();
ConsiderChildOverflow(aMetrics.mOverflowAreas, kid);
FinishAndStoreOverflow(&aMetrics);
} else {
// Pretend we are a span and reflow the child frame
nsLineLayout* ll = aReflowInput.mLineLayout;
bool pushedFrame;
ll->SetInFirstLetter(
mStyleContext->GetPseudo() == nsCSSPseudoElements::firstLetter);
ll->BeginSpan(this, &aReflowInput, bp.IStart(wm),
availSize.ISize(wm), &mBaseline);
ll->ReflowFrame(kid, aReflowStatus, &kidMetrics, pushedFrame);
NS_ASSERTION(lineWM.IsVertical() == wm.IsVertical(),
"we're assuming we can mix sizes between lineWM and wm "
"since we shouldn't have orthogonal writing modes within "
"a line.");
aMetrics.ISize(lineWM) = ll->EndSpan(this) + bp.IStartEnd(wm);
ll->SetInFirstLetter(false);
if (mStyleContext->StyleTextReset()->mInitialLetterSize != 0.0f) {
aMetrics.SetBlockStartAscent(kidMetrics.BlockStartAscent() +
bp.BStart(wm));
aMetrics.BSize(lineWM) = kidMetrics.BSize(lineWM) + bp.BStartEnd(wm);
} else {
nsLayoutUtils::SetBSizeFromFontMetrics(this, aMetrics, bp, lineWM, wm);
}
}
if (!NS_INLINE_IS_BREAK_BEFORE(aReflowStatus)) {
// Create a continuation or remove existing continuations based on
// the reflow completion status.
if (NS_FRAME_IS_COMPLETE(aReflowStatus)) {
if (aReflowInput.mLineLayout) {
aReflowInput.mLineLayout->SetFirstLetterStyleOK(false);
}
nsIFrame* kidNextInFlow = kid->GetNextInFlow();
if (kidNextInFlow) {
// Remove all of the childs next-in-flows
kidNextInFlow->GetParent()->DeleteNextInFlowChild(kidNextInFlow, true);
}
} else {
// Create a continuation for the child frame if it doesn't already
// have one.
if (!IsFloating()) {
CreateNextInFlow(kid);
// And then push it to our overflow list
const nsFrameList& overflow = mFrames.RemoveFramesAfter(kid);
if (overflow.NotEmpty()) {
SetOverflowFrames(overflow);
}
} else if (!kid->GetNextInFlow()) {
// For floating first letter frames (if a continuation wasn't already
// created for us) we need to put the continuation with the rest of the
// text that the first letter frame was made out of.
nsIFrame* continuation;
CreateContinuationForFloatingParent(aPresContext, kid,
&continuation, true);
}
}
}
NS_FRAME_SET_TRUNCATION(aReflowStatus, aReflowInput, aMetrics);
}
