void SCH_EDIT_FRAME::SetSheetNumberAndCount()
{
SCH_SCREEN* screen = GetScreen();
SCH_SCREENS s_list;
/* Set the sheet count, and the sheet number (1 for root sheet)
*/
int sheet_count = g_RootSheet->CountSheets();
int SheetNumber = 1;
wxString current_sheetpath = m_CurrentSheet->Path();
SCH_SHEET_LIST SheetList;
// Examine all sheets path to find the current sheets path,
// and count them from root to the current sheet path:
SCH_SHEET_PATH* sheet;
for( sheet = SheetList.GetFirst(); sheet != NULL; sheet = SheetList.GetNext() )
{
wxString sheetpath = sheet->Path();
if( sheetpath == current_sheetpath ) // Current sheet path found
break;
SheetNumber++; /* Not found, increment sheet
* number before this current
* path */
}
for( screen = s_list.GetFirst(); screen != NULL; screen = s_list.GetNext() )
{
screen->m_NumberOfScreens = sheet_count;
}
GetScreen()->m_ScreenNumber = SheetNumber;
}
void SCH_EDIT_FRAME::OnFindDrcMarker( wxFindDialogEvent& event )
{
static SCH_MARKER* lastMarker = NULL;
wxString msg;
SCH_SHEET_LIST schematic;
SCH_SHEET_PATH* sheetFoundIn = NULL;
bool wrap = ( event.GetFlags() & FR_SEARCH_WRAP ) != 0;
wxRect clientRect( wxPoint( 0, 0 ), GetClientSize() );
bool warpCursor = ( ( event.GetId() == wxEVT_COMMAND_FIND_CLOSE ) ||
!( event.GetFlags() & FR_NO_WARP_CURSOR ) );
if( event.GetFlags() & FR_CURRENT_SHEET_ONLY )
{
sheetFoundIn = m_CurrentSheet;
lastMarker = (SCH_MARKER*) m_CurrentSheet->FindNextItem( SCH_MARKER_T, lastMarker, wrap );
}
else
{
lastMarker = (SCH_MARKER*) schematic.FindNextItem( SCH_MARKER_T, &sheetFoundIn,
lastMarker, wrap );
}
if( lastMarker != NULL )
{
if( *sheetFoundIn != *m_CurrentSheet )
{
sheetFoundIn->LastScreen()->SetZoom( GetScreen()->GetZoom() );
*m_CurrentSheet = *sheetFoundIn;
m_CurrentSheet->UpdateAllScreenReferences();
}
sheetFoundIn->LastScreen()->SetCrossHairPosition( lastMarker->GetPosition() );
RedrawScreen( lastMarker->GetPosition(), warpCursor );
wxString path = sheetFoundIn->Path();
wxString units = GetAbbreviatedUnitsLabel();
double x = To_User_Unit( g_UserUnit, (double) lastMarker->GetPosition().x,
m_internalUnits );
double y = To_User_Unit( g_UserUnit, (double) lastMarker->GetPosition().y,
m_internalUnits );
msg.Printf( _( "Design rule check marker found in sheet %s at %0.3f%s, %0.3f%s" ),
GetChars( path ), x, GetChars( units ), y, GetChars( units) );
SetStatusText( msg );
}
else
{
SetStatusText( _( "No more markers were found." ) );
}
}
SCH_SHEET_PATH* SCH_SHEET_LIST::GetSheetByPath( const wxString aPath, bool aHumanReadable )
{
SCH_SHEET_PATH* sheet = GetFirst();
wxString sheetPath;
while( sheet )
{
sheetPath = ( aHumanReadable ) ? sheet->PathHumanReadable() : sheet->Path();
if( sheetPath == aPath )
return sheet;
sheet = GetNext();
}
return NULL;
}
void DIALOG_PLOT_SCHEMATIC::createSVGFile( bool aPrintAll, bool aPrintFrameRef )
{
wxString msg;
if( aPrintAll )
{
SCH_SHEET_PATH* sheetpath;
SCH_SHEET_PATH oldsheetpath = m_parent->GetCurrentSheet();
SCH_SHEET_LIST SheetList( NULL );
sheetpath = SheetList.GetFirst();
SCH_SHEET_PATH list;
WX_TEXT_CTRL_REPORTER reporter(m_MessagesBox);
for( ; ; )
{
if( sheetpath == NULL )
{
break;
}
SCH_SCREEN* screen;
list.Clear();
if( list.BuildSheetPathInfoFromSheetPathValue( sheetpath->Path() ) )
{
m_parent->SetCurrentSheet( list );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
screen = m_parent->GetCurrentSheet().LastScreen();
}
else // Should not happen
{
return;
}
sheetpath = SheetList.GetNext();
try
{
wxString fname = m_parent->GetUniqueFilenameForCurrentSheet();
wxString ext = SVG_PLOTTER::GetDefaultFileExtension();
wxFileName plotFileName = createPlotFileName( m_outputDirectoryName,
fname, ext, &reporter );
bool success = plotOneSheetSVG( m_parent, plotFileName.GetFullPath(), screen,
getModeColor() ? false : true,
aPrintFrameRef );
if( !success )
{
msg.Printf( _( "Error creating file '%s'\n" ),
GetChars( plotFileName.GetFullPath() ) );
}
else
{
msg.Printf( _( "File '%s' OK\n" ),
GetChars( plotFileName.GetFullPath() ) );
}
m_MessagesBox->AppendText( msg );
}
catch( const IO_ERROR& e )
{
// Cannot plot SVG file
msg.Printf( wxT( "SVG Plotter Exception : '%s'" ), GetChars( e.errorText ) );
m_MessagesBox->AppendText( msg );
m_parent->SetCurrentSheet( oldsheetpath );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
return;
}
}
m_parent->SetCurrentSheet( oldsheetpath );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
}
else // Print current sheet
{
SCH_SCREEN* screen = (SCH_SCREEN*) m_parent->GetScreen();
try
{
wxString fname = screen->GetFileName();
wxString ext = SVG_PLOTTER::GetDefaultFileExtension();
wxFileName fn = createPlotFileName( m_outputDirectoryName, fname, ext );
bool success = plotOneSheetSVG( m_parent, fn.GetFullPath(), screen,
getModeColor() ? false : true,
aPrintFrameRef );
if( success )
{
msg.Printf( _( "Plot: <%s> OK\n" ),
GetChars( fn.GetFullPath() ) );
}
else // Error
{
msg.Printf( _( "Unable to create <%s>\n" ),
GetChars( fn.GetFullPath() ) );
}
m_MessagesBox->AppendText( msg );
}
catch( const IO_ERROR& e )
{
// Cannot plot SVG file
msg.Printf( wxT( "SVG Plotter Exception : <%s>"), GetChars( e.errorText ) );
m_MessagesBox->AppendText( msg );
return;
}
}
}
void DIALOG_PLOT_SCHEMATIC::createPDFFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_SCREEN* screen = m_parent->GetScreen();
SCH_SHEET_PATH* sheetpath;
SCH_SHEET_PATH oldsheetpath = m_parent->GetCurrentSheet(); // sheetpath is saved here
wxPoint plot_offset;
/* When printing all pages, the printed page is not the current page. In
* complex hierarchies, we must update component references and others
* parameters in the given printed SCH_SCREEN, accordint to the sheet path
* because in complex hierarchies a SCH_SCREEN (a drawing ) is shared
* between many sheets and component references depend on the actual sheet
* path used
*/
SCH_SHEET_LIST SheetList( NULL );
sheetpath = SheetList.GetFirst();
// Allocate the plotter and set the job level parameter
PDF_PLOTTER* plotter = new PDF_PLOTTER();
plotter->SetDefaultLineWidth( GetDefaultLineThickness() );
plotter->SetColorMode( getModeColor() );
plotter->SetCreator( wxT( "Eeschema-PDF" ) );
wxString msg;
wxString plotFileName;
// First page handling is different
bool first_page = true;
do
{
// Step over the schematic hierarchy
if( aPlotAll )
{
SCH_SHEET_PATH list;
if( list.BuildSheetPathInfoFromSheetPathValue( sheetpath->Path() ) )
{
m_parent->SetCurrentSheet( list );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
screen = m_parent->GetCurrentSheet().LastScreen();
}
else // Should not happen
wxASSERT( 0 );
sheetpath = SheetList.GetNext();
}
if( first_page )
{
plotFileName = m_parent->GetUniqueFilenameForCurrentSheet() + wxT( "." )
+ PDF_PLOTTER::GetDefaultFileExtension();
if( ! plotter->OpenFile( plotFileName ) )
{
msg.Printf( _( "** Unable to create %s **\n" ), GetChars( plotFileName ) );
m_MessagesBox->AppendText( msg );
delete plotter;
return;
}
// Open the plotter and do the first page
SetLocaleTo_C_standard();
setupPlotPagePDF( plotter, screen );
plotter->StartPlot();
first_page = false;
}
else
{
/* For the following pages you need to close the (finished) page,
* reconfigure, and then start a new one */
plotter->ClosePage();
setupPlotPagePDF( plotter, screen );
plotter->StartPage();
}
plotOneSheetPDF( plotter, screen, aPlotFrameRef );
} while( aPlotAll && sheetpath );
// Everything done, close the plot and restore the environment
plotter->EndPlot();
delete plotter;
SetLocaleTo_Default();
// Restore the previous sheet
m_parent->SetCurrentSheet( oldsheetpath );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
msg.Printf( _( "Plot: %s OK\n" ), GetChars( plotFileName ) );
m_MessagesBox->AppendText( msg );
}
XNODE* NETLIST_EXPORTER_GENERIC::makeComponents()
{
XNODE* xcomps = node( wxT( "components" ) );
wxString timeStamp;
// some strings we need many times, but don't want to construct more
// than once for performance. These are used within loops so the
// enclosing wxString constructor would fire on each loop iteration if
// they were in a nested scope.
// these are actually constructor invocations, not assignments as it appears:
wxString sFields = wxT( "fields" );
wxString sField = wxT( "field" );
wxString sComponent = wxT( "comp" ); // use "part" ?
wxString sName = wxT( "name" );
wxString sRef = wxT( "ref" );
wxString sPins = wxT( "pins" );
wxString sPin = wxT( "pin" );
wxString sValue = wxT( "value" );
wxString sSheetPath = wxT( "sheetpath" );
wxString sFootprint = wxT( "footprint" );
wxString sDatasheet = wxT( "datasheet" );
wxString sTStamp = wxT( "tstamp" );
wxString sTStamps = wxT( "tstamps" );
wxString sTSFmt = wxT( "%8.8lX" ); // comp->m_TimeStamp
wxString sLibSource = wxT( "libsource" );
wxString sLibPart = wxT( "libpart" );
wxString sLib = wxT( "lib" );
wxString sPart = wxT( "part" );
wxString sNames = wxT( "names" );
m_ReferencesAlreadyFound.Clear();
SCH_SHEET_LIST sheetList;
// Output is xml, so there is no reason to remove spaces from the field values.
// And XML element names need not be translated to various languages.
for( SCH_SHEET_PATH* path = sheetList.GetFirst(); path; path = sheetList.GetNext() )
{
for( EDA_ITEM* schItem = path->LastDrawList(); schItem; schItem = schItem->Next() )
{
SCH_COMPONENT* comp = findNextComponentAndCreatePinList( schItem, path );
if( !comp )
break; // No component left
schItem = comp;
XNODE* xcomp; // current component being constructed
// Output the component's elements in order of expected access frequency.
// This may not always look best, but it will allow faster execution
// under XSL processing systems which do sequential searching within
// an element.
xcomps->AddChild( xcomp = node( sComponent ) );
xcomp->AddAttribute( sRef, comp->GetRef( path->Last() ) );
xcomp->AddChild( node( sValue, comp->GetField( VALUE )->GetText() ) );
if( !comp->GetField( FOOTPRINT )->IsVoid() )
xcomp->AddChild( node( sFootprint, comp->GetField( FOOTPRINT )->GetText() ) );
if( !comp->GetField( DATASHEET )->IsVoid() )
xcomp->AddChild( node( sDatasheet, comp->GetField( DATASHEET )->GetText() ) );
// Export all user defined fields within the component,
// which start at field index MANDATORY_FIELDS. Only output the <fields>
// container element if there are any <field>s.
if( comp->GetFieldCount() > MANDATORY_FIELDS )
{
XNODE* xfields;
xcomp->AddChild( xfields = node( sFields ) );
for( int fldNdx = MANDATORY_FIELDS; fldNdx < comp->GetFieldCount(); ++fldNdx )
{
SCH_FIELD* f = comp->GetField( fldNdx );
// only output a field if non empty and not just "~"
if( !f->IsVoid() )
{
XNODE* xfield;
xfields->AddChild( xfield = node( sField, f->GetText() ) );
xfield->AddAttribute( sName, f->GetName() );
}
}
}
XNODE* xlibsource;
xcomp->AddChild( xlibsource = node( sLibSource ) );
// "logical" library name, which is in anticipation of a better search
// algorithm for parts based on "logical_lib.part" and where logical_lib
// is merely the library name minus path and extension.
LIB_PART* part = m_libs->FindLibPart( comp->GetPartName() );
if( part )
xlibsource->AddAttribute( sLib, part->GetLib()->GetLogicalName() );
xlibsource->AddAttribute( sPart, comp->GetPartName() );
XNODE* xsheetpath;
xcomp->AddChild( xsheetpath = node( sSheetPath ) );
xsheetpath->AddAttribute( sNames, path->PathHumanReadable() );
xsheetpath->AddAttribute( sTStamps, path->Path() );
timeStamp.Printf( sTSFmt, (unsigned long)comp->GetTimeStamp() );
xcomp->AddChild( node( sTStamp, timeStamp ) );
}
}
return xcomps;
}
XNODE* NETLIST_EXPORTER_GENERIC::makeDesignHeader()
{
SCH_SCREEN* screen;
XNODE* xdesign = node( wxT("design") );
XNODE* xtitleBlock;
XNODE* xsheet;
XNODE* xcomment;
wxString sheetTxt;
wxFileName sourceFileName;
// the root sheet is a special sheet, call it source
xdesign->AddChild( node( wxT( "source" ), g_RootSheet->GetScreen()->GetFileName() ) );
xdesign->AddChild( node( wxT( "date" ), DateAndTime() ) );
// which Eeschema tool
xdesign->AddChild( node( wxT( "tool" ), wxT( "Eeschema " ) + GetBuildVersion() ) );
/*
Export the sheets information
*/
SCH_SHEET_LIST sheetList;
for( SCH_SHEET_PATH* sheet = sheetList.GetFirst(); sheet; sheet = sheetList.GetNext() )
{
screen = sheet->LastScreen();
xdesign->AddChild( xsheet = node( wxT( "sheet" ) ) );
// get the string representation of the sheet index number.
// Note that sheet->GetIndex() is zero index base and we need to increment the number by one to make
// human readable
sheetTxt.Printf( wxT( "%d" ), ( sheetList.GetIndex() + 1 ) );
xsheet->AddAttribute( wxT( "number" ), sheetTxt );
xsheet->AddAttribute( wxT( "name" ), sheet->PathHumanReadable() );
xsheet->AddAttribute( wxT( "tstamps" ), sheet->Path() );
TITLE_BLOCK tb = screen->GetTitleBlock();
xsheet->AddChild( xtitleBlock = node( wxT( "title_block" ) ) );
xtitleBlock->AddChild( node( wxT( "title" ), tb.GetTitle() ) );
xtitleBlock->AddChild( node( wxT( "company" ), tb.GetCompany() ) );
xtitleBlock->AddChild( node( wxT( "rev" ), tb.GetRevision() ) );
xtitleBlock->AddChild( node( wxT( "date" ), tb.GetDate() ) );
// We are going to remove the fileName directories.
sourceFileName = wxFileName( screen->GetFileName() );
xtitleBlock->AddChild( node( wxT( "source" ), sourceFileName.GetFullName() ) );
xtitleBlock->AddChild( xcomment = node( wxT( "comment" ) ) );
xcomment->AddAttribute( wxT("number"), wxT("1") );
xcomment->AddAttribute( wxT( "value" ), tb.GetComment1() );
xtitleBlock->AddChild( xcomment = node( wxT( "comment" ) ) );
xcomment->AddAttribute( wxT("number"), wxT("2") );
xcomment->AddAttribute( wxT( "value" ), tb.GetComment2() );
xtitleBlock->AddChild( xcomment = node( wxT( "comment" ) ) );
xcomment->AddAttribute( wxT("number"), wxT("3") );
xcomment->AddAttribute( wxT( "value" ), tb.GetComment3() );
xtitleBlock->AddChild( xcomment = node( wxT( "comment" ) ) );
xcomment->AddAttribute( wxT("number"), wxT("4") );
xcomment->AddAttribute( wxT( "value" ), tb.GetComment4() );
}
return xdesign;
}
void DIALOG_PLOT_SCHEMATIC::CreateDXFFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_EDIT_FRAME* schframe = (SCH_EDIT_FRAME*) m_parent;
SCH_SCREEN* screen = schframe->GetScreen();
SCH_SHEET_PATH* sheetpath;
SCH_SHEET_PATH oldsheetpath = schframe->GetCurrentSheet();
/* When printing all pages, the printed page is not the current page.
* In complex hierarchies, we must setup references and others parameters
* in the printed SCH_SCREEN
* because in complex hierarchies a SCH_SCREEN (a schematic drawings)
* is shared between many sheets
*/
SCH_SHEET_LIST SheetList( NULL );
sheetpath = SheetList.GetFirst();
SCH_SHEET_PATH list;
REPORTER& reporter = m_MessagesBox->Reporter();
while( true )
{
if( aPlotAll )
{
if( sheetpath == NULL )
break;
list.Clear();
if( list.BuildSheetPathInfoFromSheetPathValue( sheetpath->Path() ) )
{
schframe->SetCurrentSheet( list );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
screen = schframe->GetCurrentSheet().LastScreen();
}
else // Should not happen
{
return;
}
sheetpath = SheetList.GetNext();
}
wxPoint plot_offset;
wxString msg;
try
{
wxString fname = schframe->GetUniqueFilenameForCurrentSheet();
wxString ext = DXF_PLOTTER::GetDefaultFileExtension();
wxFileName plotFileName = createPlotFileName( m_outputDirectoryName, fname,
ext, &reporter );
if( PlotOneSheetDXF( plotFileName.GetFullPath(), screen, plot_offset, 1.0, aPlotFrameRef ) )
{
msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::ACTION );
}
else // Error
{
msg.Printf( _( "Unable to create file '%s'.\n" ), GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::ERROR );
}
}
catch( IO_ERROR& e )
{
msg.Printf( wxT( "DXF Plotter exception: %s"), GetChars( e.errorText ) );
reporter.Report( msg, REPORTER::ERROR );
schframe->SetCurrentSheet( oldsheetpath );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
return;
}
if( !aPlotAll )
{
break;
}
}
schframe->SetCurrentSheet( oldsheetpath );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
}
void DIALOG_PLOT_SCHEMATIC::createHPGLFile( bool aPlotAll, bool aPlotFrameRef )
{
wxString plotFileName;
SCH_SCREEN* screen = m_parent->GetScreen();
SCH_SHEET_PATH* sheetpath;
SCH_SHEET_PATH oldsheetpath = m_parent->GetCurrentSheet();
/* When printing all pages, the printed page is not the current page.
* In complex hierarchies, we must setup references and other parameters
* in the printed SCH_SCREEN
* because in complex hierarchies a SCH_SCREEN (a schematic drawings)
* is shared between many sheets
*/
SCH_SHEET_LIST SheetList( NULL );
sheetpath = SheetList.GetFirst();
SCH_SHEET_PATH list;
SetHPGLPenWidth();
while( true )
{
if( aPlotAll )
{
if( sheetpath == NULL )
break;
list.Clear();
if( list.BuildSheetPathInfoFromSheetPathValue( sheetpath->Path() ) )
{
m_parent->SetCurrentSheet( list );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
screen = m_parent->GetCurrentSheet().LastScreen();
if( !screen ) // LastScreen() may return NULL
screen = m_parent->GetScreen();
}
else // Should not happen
return;
sheetpath = SheetList.GetNext();
}
const PAGE_INFO& curPage = screen->GetPageSettings();
PAGE_INFO plotPage = curPage;
// if plotting on a page size other than curPage
if( m_HPGLPaperSizeOption->GetSelection() != PAGE_DEFAULT )
plotPage.SetType( plot_sheet_list( m_HPGLPaperSizeOption->GetSelection() ) );
// Calculation of conversion scales.
double plot_scale = (double) plotPage.GetWidthMils() / curPage.GetWidthMils();
// Calculate offsets
wxPoint plotOffset;
if( GetPlotOriginCenter() )
{
plotOffset.x = plotPage.GetWidthIU() / 2;
plotOffset.y = -plotPage.GetHeightIU() / 2;
}
plotFileName = m_parent->GetUniqueFilenameForCurrentSheet() + wxT( "." )
+ HPGL_PLOTTER::GetDefaultFileExtension();
plotFileName = Prj().AbsolutePath( plotFileName );
LOCALE_IO toggle;
wxString msg;
if( Plot_1_Page_HPGL( plotFileName, screen, plotPage, plotOffset,
plot_scale, aPlotFrameRef ) )
msg.Printf( _( "Plot: <%s> OK\n" ), GetChars( plotFileName ) );
else // Error
msg.Printf( _( "Unable to create <%s>\n" ), GetChars( plotFileName ) );
m_MessagesBox->AppendText( msg );
if( !aPlotAll )
break;
}
m_parent->SetCurrentSheet( oldsheetpath );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
}
void DIALOG_PLOT_SCHEMATIC::CreateDXFFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_EDIT_FRAME* schframe = (SCH_EDIT_FRAME*) m_parent;
SCH_SCREEN* screen = schframe->GetScreen();
SCH_SHEET_PATH* sheetpath;
SCH_SHEET_PATH oldsheetpath = schframe->GetCurrentSheet();
wxString plotFileName;
/* When printing all pages, the printed page is not the current page.
* In complex hierarchies, we must setup references and others parameters
* in the printed SCH_SCREEN
* because in complex hierarchies a SCH_SCREEN (a schematic drawings)
* is shared between many sheets
*/
SCH_SHEET_LIST SheetList( NULL );
sheetpath = SheetList.GetFirst();
SCH_SHEET_PATH list;
while( true )
{
if( aPlotAll )
{
if( sheetpath == NULL )
break;
list.Clear();
if( list.BuildSheetPathInfoFromSheetPathValue( sheetpath->Path() ) )
{
schframe->SetCurrentSheet( list );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
screen = schframe->GetCurrentSheet().LastScreen();
}
else // Should not happen
{
return;
}
sheetpath = SheetList.GetNext();
}
wxPoint plot_offset;
plotFileName = schframe->GetUniqueFilenameForCurrentSheet() + wxT(".")
+ DXF_PLOTTER::GetDefaultFileExtension();
wxString msg;
if( PlotOneSheetDXF( plotFileName, screen, plot_offset, 1.0, aPlotFrameRef ) )
msg.Printf( _( "Plot: <%s> OK\n" ), GetChars( plotFileName ) );
else // Error
msg.Printf( _( "Unable to create <%s>\n" ), GetChars( plotFileName ) );
m_MessagesBox->AppendText( msg );
if( !aPlotAll )
break;
}
schframe->SetCurrentSheet( oldsheetpath );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
}
