void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartHorizontalLay();
{
// Action choices
wxArrayString processChoices;
processChoices.Add(_("Truncate Detected Silence"));
processChoices.Add(_("Compress Excess Silence"));
S.Id(ID_PROCESS_CHOICE).TieChoice(wxT(""),
mEffect->mProcessIndex,
&processChoices);
S.SetSizeHints(-1, -1);
}
S.EndHorizontalLay();
S.StartStatic(_("Detect Silence"));
{
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Threshold
wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());
S.TieChoice(_("Level:"),
mEffect->mTruncDbChoiceIndex,
&choices);
S.SetSizeHints(-1, -1);
S.AddSpace(0); // 'choices' aleady includes units.
// Ignored silence
S.Id(ID_DETECT_SILENCE).TieNumericTextBox(_("Duration:"),
mEffect->mInitialAllowedSilence,
12);
S.AddUnits(wxT("seconds"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Truncation / Compression factor
S.Id( ID_TRUNCATION_DURATION ).TieNumericTextBox(_("Truncate to:"),
mEffect->mTruncLongestAllowedSilence,
12);
S.AddUnits(wxT("seconds"));
S.Id( ID_COMPRESS_FACTOR ).TieNumericTextBox(_("Compress to:"),
mEffect->mSilenceCompressPercent,
12);
S.AddUnits(wxT("percent"));
}
S.EndMultiColumn();
// Warnings
pWarning = S.AddVariableText( wxT("") );
UpdateUI();
}
void AmplifyDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
vld.SetIncludes(wxArrayString(12, numbers));
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Dominic Mazzoni"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
// Amplitude
S.StartMultiColumn(2, wxCENTER);
{
mAmpT = S.Id(ID_AMP_TEXT).AddTextBox(_("Amplification (dB):"),
wxT(""),
12);
mAmpT->SetValidator(vld);
}
S.EndMultiColumn();
// Amplitude
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mAmpS = S.Id(ID_AMP_SLIDER).AddSlider(wxT(""),
0,
AMP_MAX,
AMP_MIN);
mAmpS->SetName(_("Amplification (dB)"));
}
S.EndHorizontalLay();
// Peek
S.StartMultiColumn(2, wxCENTER);
{
mPeakT = S.Id(ID_PEAK_TEXT).AddTextBox(_("New Peak Amplitude (dB):"),
wxT(""),
12);
// mPeakT->SetValidator(vld);
}
S.EndMultiColumn();
// Clipping
S.StartHorizontalLay(wxCENTER);
{
mClip = S.Id(ID_CLIP_CHECKBOX).AddCheckBox(_("Allow clipping"),
wxT("false"));
}
S.EndHorizontalLay();
return;
}
void EffectDtmf::PopulateOrExchange(ShuttleGui & S)
{
// dialog will be passed values from effect
// Effect retrieves values from saved config
// Dialog will take care of using them to initialize controls
// If there is a selection, use that duration, otherwise use
// value from saved config: this is useful is user wants to
// replace selection with dtmf sequence
S.AddSpace(0, 5);
S.StartMultiColumn(2, wxCENTER);
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST, &dtmfSequence);
vldDtmf.SetIncludes(wxArrayString(WXSIZEOF(kSymbols), kSymbols));
mDtmfSequenceT = S.Id(ID_Sequence).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfSequenceT->SetValidator(vldDtmf);
FloatingPointValidator<double> vldAmp(3, &dtmfAmplitude, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amplitude, MAX_Amplitude);
S.Id(ID_Amplitude).AddTextBox(_("Amplitude (0-1):"), wxT(""), 10)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mDtmfDurationT = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_Duration,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->EnableMenu();
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyCycleS = S.Id(ID_DutyCycle).AddSlider( {},
dtmfDutyCycle * SCL_DutyCycle,
MAX_DutyCycle * SCL_DutyCycle,
MIN_DutyCycle * SCL_DutyCycle);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.AddVariableText(wxString::Format(wxT("%.1f %%"), dtmfDutyCycle), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.AddVariableText(wxString::Format(wxString(wxT("%.0f ")) + _("ms"), dtmfTone * 1000.0), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.AddVariableText(wxString::Format(wxString(wxT("%0.f ")) + _("ms"), dtmfSilence * 1000.0), false);
}
S.EndMultiColumn();
}
void WahwahDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_NUMERIC);
S.SetBorder(5);
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxCENTER);
{
wxSlider *s;
wxTextCtrl * tempTC;
tempTC = S.Id(ID_FREQTEXT).AddTextBox(_("LFO Frequency (Hz):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_FREQSLIDER).AddSlider(wxT(""), 100, FREQ_MAX, FREQ_MIN);
s->SetName(_("LFO frequency in hertz"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_PHASETEXT).AddTextBox(_("LFO Start Phase (deg.):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_PHASESLIDER).AddSlider(wxT(""), 0, PHASE_MAX, PHASE_MIN);
s->SetName(_("LFO start phase in degrees"));
s->SetLineSize(10);
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_DEPTHTEXT).AddTextBox(_("Depth (%):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_DEPTHSLIDER).AddSlider(wxT(""), 0, DEPTH_MAX, DEPTH_MIN);
s->SetName(_("Depth in percent"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_RESONANCETEXT).AddTextBox(_("Resonance:"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_RESONANCESLIDER).AddSlider(wxT(""), 0, RES_MAX, RES_MIN);
s->SetName(_("Resonance"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_FREQOFFTEXT).AddTextBox(_("Wah Frequency Offset (%):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s =S.Id(ID_FREQOFFSLIDER).AddSlider(wxT(""), 0, FREQOFF_MAX, FREQOFF_MIN);
s->SetName(_("Wah frequency offset in percent"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
}
S.EndMultiColumn();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), dAmplitude, 10);
S.AddPrompt(_("Duration:"));
if (mDtmfDurationT == NULL)
{
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
wxT(""),
dDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to the
* effect, I want it (dDuration) to be used as the duration, and with
* "seconds" this does not always work properly. For example, it rounds
* down to zero... */
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
mDtmfDurationT->EnableMenu();
}
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void ChangeSpeedDialog::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(10);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Change Speed, affecting both Tempo and Pitch") +
wxString(wxT("\n\n")) +
_("by Vaughan Johnson && Dominic Mazzoni") +
wxString(wxT("\n")) +
_("using SampleRate, by Erik de Castro Lopo"));
}
S.EndHorizontalLay();
S.SetBorder(5);
//
S.StartMultiColumn(2, wxCENTER);
{
mpTextCtrl_PercentChange =
S.Id(ID_TEXT_PERCENTCHANGE).AddTextBox(_("Percent Change:"), wxT(""), 12);
wxTextValidator validator(wxFILTER_NUMERIC);
mpTextCtrl_PercentChange->SetValidator(validator);
}
S.EndMultiColumn();
//
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mpSlider_PercentChange =
S.Id(ID_SLIDER_PERCENTCHANGE).AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
mpSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
//
S.StartMultiColumn(5, wxCENTER);
{
S.AddUnits(_("Standard Vinyl RPM:"));
wxArrayString rpmStrings;
rpmStrings.Add(wxT("33 1/3"));
rpmStrings.Add(wxT("45"));
rpmStrings.Add(wxT("78"));
/* i18n-hint: n/a is an English abbreviation meaning "not applicable". */
rpmStrings.Add(_("n/a"));
mpChoice_FromVinyl =
S.Id(ID_CHOICE_FROMVINYL).AddChoice(_("from"), wxT(""), &rpmStrings);
mpChoice_FromVinyl->SetName(_("From RPM"));
mpChoice_FromVinyl->SetSizeHints(100, -1);
mpChoice_ToVinyl =
S.Id(ID_CHOICE_TOVINYL).AddChoice(_("to"), wxT(""), &rpmStrings);
mpChoice_ToVinyl->SetName(_("To RPM"));
mpChoice_ToVinyl->SetSizeHints(100, -1);
}
S.EndMultiColumn();
}
void ClickRemovalDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
vld.SetIncludes(wxArrayString(10, numbers));
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Click and Pop Removal by Craig DeForest"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
// Threshold
mThreshT = S.Id(ID_THRESH_TEXT).AddTextBox(_("Select threshold (lower is more sensitive):"),
wxT(""),
10);
mThreshT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mThreshS = S.Id(ID_THRESH_SLIDER).AddSlider(wxT(""),
0,
MAX_THRESHOLD);
mThreshS->SetName(_("Select threshold"));
mThreshS->SetRange(MIN_THRESHOLD, MAX_THRESHOLD);
#if defined(__WXGTK__)
// Force a minimum size since wxGTK allows it to go to zero
mThreshS->SetMinSize(wxSize(100, -1));
#endif
// Click width
mWidthT = S.Id(ID_WIDTH_TEXT).AddTextBox(_("Max spike width (higher is more sensitive):"),
wxT(""),
10);
mWidthT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mWidthS = S.Id(ID_WIDTH_SLIDER).AddSlider(wxT(""),
0,
MAX_CLICK_WIDTH);
mWidthS->SetName(_("Max spike width"));
mWidthS->SetRange(MIN_CLICK_WIDTH, MAX_CLICK_WIDTH);
#if defined(__WXGTK__)
// Force a minimum size since wxGTK allows it to go to zero
mWidthS->SetMinSize(wxSize(100, -1));
#endif
}
S.EndMultiColumn();
return;
}
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
wxArrayString empty;
S.SetBorder(2);
S.StartStatic(_("Interface"));
{
S.StartMultiColumn(2);
{
S.Id(HostID);
mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
wxT("/MidiIO/Host"),
wxT(""),
mHostNames,
mHostLabels);
S.SetSizeHints(mHostNames);
S.AddPrompt(_("Using:"));
S.AddFixedText(wxString(Pa_GetVersionText(), wxConvLocal));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Playback"));
{
S.StartMultiColumn(2);
{
S.Id(PlayID);
mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Recording"));
{
S.StartMultiColumn(2);
{
S.Id(RecordID);
mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
S.Id(ChannelsID);
/*
mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
wxEmptyString,
&empty);
*/
}
S.EndMultiColumn();
}
S.EndStatic();
}
void MacroCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
S.StartMultiColumn(4, wxEXPAND);
{
S.SetStretchyCol(1);
mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
mCommand->SetEditable(false);
mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
mEditParams->Enable(false); // disable button as box is empty
mUsePreset = S.Id(UsePresetButtonID).AddButton(_("&Use Preset"));
mUsePreset->Enable(false); // disable button as box is empty
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
mParameters->SetEditable(false);
wxString prompt{_("&Details")};
S.Prop(0).AddPrompt(prompt);
mDetails = S.AddTextWindow( wxT(""));
mDetails->SetEditable(false);
mDetails->SetName(wxStripMenuCodes(prompt));
}
S.EndMultiColumn();
S.Prop(10).StartStatic(_("Choose command"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
mChoices = S.Id(CommandsListID).AddListControl();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons( eOkButton | eCancelButton | eHelpButton);
PopulateCommandList();
if (mChoices->GetItemCount() > 0) {
// set first item to be selected (and the focus when the
// list first becomes the focus)
mChoices->SetItemState(0, wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED,
wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED);
}
SetMinSize(wxSize(780, 560));
Fit();
Center();
}
/// Defines the dialog and does data exchange with it.
void BatchProcessDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
/*i18n-hint: A chain is a sequence of commands that can be applied
* to one or more audio files.*/
S.StartStatic(_("&Select Chain"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_REPORT | wxLC_HRULES | wxLC_VRULES |
wxLC_SINGLE_SEL);
mChains = S.Id(ChainsListID).AddListControlReportMode();
mChains->InsertColumn(0, _("Chain"), wxLIST_FORMAT_LEFT);
}
S.EndStatic();
S.StartHorizontalLay(wxALIGN_RIGHT, false);
{
S.SetBorder(10);
S.Id(ApplyToProjectID).AddButton(_("Apply to Current &Project"));
S.Id(ApplyToFilesID).AddButton(_("Apply to &Files..."));
S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
wxArrayString names = mBatchCommands.GetNames();
for (int i = 0; i < (int)names.GetCount(); i++) {
mChains->InsertItem(i, names[i]);
}
// Get and validate the currently active chain
wxString name = gPrefs->Read(wxT("/Batch/ActiveChain"), wxT(""));
int item = mChains->FindItem(-1, name);
if (item == -1) {
item = 0;
name = mChains->GetItemText(0);
}
// Select the name in the list...this will fire an event.
mChains->SetItemState(item, wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED);
Layout();
Fit();
SetSizeHints(GetSize());
Center();
// Set the column size for the chains list.
wxSize sz = mChains->GetClientSize();
mChains->SetColumnWidth(0, sz.x);
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(20, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura (2006)"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
S.AddPrompt(_("DTMF duration:"));
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
/*
use this instead of "seconds" because if a selection is passed to the effect,
I want it (dDuration) to be used as the duration, and with "seconds" this does
not always work properly. For example, it rounds down to zero...
*/
TimeTextCtrl::GetBuiltinFormat(dIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))),
dDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
S.AddWindow(mDtmfDurationT);
mDtmfDurationT->EnableMenu();
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX);
mDtmfDutyS->SetRange(DUTY_MIN, DUTY_MAX);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void BassBoostDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
vld.SetIncludes(wxArrayString(10, numbers));
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Nasca Octavian Paul"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
// Frequency
mFreqT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Frequency (Hz):"),
wxT(""),
10);
mFreqT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mFreqS = S.Id(ID_FREQ_SLIDER).AddSlider(wxT(""),
0,
FREQ_MAX);
mFreqS->SetName(_("Frequency Hertz"));
mFreqS->SetRange(FREQ_MIN, FREQ_MAX);
// Boost
mBoostT = S.Id(ID_BOOST_TEXT).AddTextBox(_("Boost (dB):"),
wxT(""),
10);
mBoostT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mBoostS = S.Id(ID_BOOST_SLIDER).AddSlider(wxT(""),
0,
BOOST_MAX);
mBoostS->SetName(_("Boost dB"));
mBoostS->SetRange(BOOST_MIN, BOOST_MAX);
}
S.EndMultiColumn();
return;
}
void AmplifyDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_NUMERIC);
S.AddSpace(0, 5);
// Amplitude
S.StartMultiColumn(2, wxCENTER);
{
mAmpT = S.Id(ID_AMP_TEXT).AddTextBox(_("Amplification (dB):"),
wxT(""),
12);
mAmpT->SetValidator(vld);
}
S.EndMultiColumn();
// Amplitude
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mAmpS = S.Id(ID_AMP_SLIDER).AddSlider(wxT(""),
0,
AMP_MAX,
AMP_MIN);
mAmpS->SetName(_("Amplification dB"));
}
S.EndHorizontalLay();
// Peek
S.StartMultiColumn(2, wxCENTER);
{
mPeakT = S.Id(ID_PEAK_TEXT).AddTextBox(_("New Peak Amplitude (dB):"),
wxT(""),
12);
mPeakT->SetValidator(vld);
}
S.EndMultiColumn();
// Clipping
S.StartHorizontalLay(wxCENTER);
{
mClip = S.Id(ID_CLIP_CHECKBOX).AddCheckBox(_("Allow clipping"),
wxT("false"));
}
S.EndHorizontalLay();
return;
}
void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Lynn Allan"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartThreeColumn();
{
wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());
S.Id( ID_LONGEST_SILENCE_TEXT ).TieTextBox(_("Max silence duration:"),
mEffect->mTruncLongestAllowedSilentMs,
10);
S.AddUnits( _("milliseconds") );
//S.AddUnits(_("(9999999 or greater is off)"));
S.TieChoice(_("Threshold for silence:"),
mEffect->mTruncDbChoiceIndex,
&choices);
}
S.EndTwoColumn();
pWarning = S.AddVariableText( wxT("") );
}
void RepeatDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
vld.SetIncludes(wxArrayString(12, numbers));
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Dominic Mazzoni && Vaughan Johnson"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
mRepeatCount = S.Id(ID_REPEAT_TEXT).AddTextBox(_("Number of times to repeat:"),
wxT(""),
12);
mRepeatCount->SetValidator(vld);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, true);
{
mTotalTime = S.AddVariableText(_("New selection length: hh:mm:ss"));
}
S.EndHorizontalLay();
}
/// Add a compound control made up from a choice and an edit
/// box.
void QualityPrefs::DefineSampleRateControl( ShuttleGui & S )
{
// We use a sizer within a sizer to get the effect we want.
// We also use the SetIfCreated idiom to get pointers to
// the controls, so that we can drive them from
// our own code.
S.SetBorder(2);
S.StartHorizontalLay(wxALIGN_LEFT );
// If the value in Prefs isn't in the list, then we want
// the last item, 'Other...' to be shown.
S.SetNoMatchSelector( mmSampleRateNames.GetCount()-1 );
// First the choice...
// We make sure it uses the ID we want, so that we get changes
S.Id( ID_SAMPLE_RATE_CHOICE );
// We make sure we have a pointer to it, so that we can drive it.
mSampleRates = S.TieChoice( wxT(""),
wxT("/SamplingRate/DefaultProjectSampleRate"),
AudioIO::GetOptimalSupportedSampleRate(),
mmSampleRateNames, mmSampleRateLabels );
// Now do the edit box...
mOtherSampleRate = S.TieTextBox(wxT(""),
mOtherSampleRateValue, 9);
S.EndHorizontalLay();
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("&Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("C&hoose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef DEPRECATED_AUDIO_CACHE
// See http://bugzilla.audacityteam.org/show_bug.cgi?id=545.
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using &RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieNumericTextBox(_("Mi&nimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
#endif // DEPRECATED_AUDIO_CACHE
}
void WaveformPrefs::PopulateOrExchange(ShuttleGui & S)
{
mPopulating = true;
S.SetBorder(2);
// S.StartStatic(_("Track Settings"));
{
mDefaultsCheckbox = 0;
if (mWt) {
/* i18n-hint: use is a verb */
mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("&Use Preferences"), mDefaulted);
}
S.StartStatic(_("Display"));
{
S.StartTwoColumn();
{
mScaleChoice =
S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
*(int*)&mTempSettings.scaleType,
&mScaleChoices);
mRangeChoice =
S.Id(ID_RANGE).TieChoice(_("Waveform dB &range") + wxString(wxT(":")),
*(int*)&mTempSettings.dBRange,
&mRangeChoices);
S.SetSizeHints(mRangeChoices);
}
S.EndTwoColumn();
}
S.EndStatic();
}
// S.EndStatic();
/*
S.StartStatic(_("Global settings"));
{
}
S.EndStatic();
*/
EnableDisableRange();
mPopulating = false;
}
void PopulateOrExchange(ShuttleGui & S)
{
wxString text;
S.SetBorder(10);
S.StartVerticalLay(true);
{
text.Printf(_("Audacity needs the file '%s' to import and export audio via FFmpeg."), mName.c_str());
S.AddTitle(text);
S.SetBorder(3);
S.StartHorizontalLay(wxALIGN_LEFT, true);
{
text.Printf(_("Location of '%s':"), mName.c_str());
S.AddTitle(text);
}
S.EndHorizontalLay();
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(0);
{
if (mLibPath.GetFullPath().IsEmpty()) {
text.Printf(_("To find '%s', click here -->"), mName.c_str());
mPathText = S.AddTextBox(wxT(""), text, 0);
}
else {
mPathText = S.AddTextBox(wxT(""), mLibPath.GetFullPath(), 0);
}
S.Id(ID_FFMPEG_BROWSE).AddButton(_("Browse..."), wxALIGN_RIGHT);
S.AddVariableText(_("To get a free copy of FFmpeg, click here -->"), true);
S.Id(ID_FFMPEG_DLOAD).AddButton(_("Download"), wxALIGN_RIGHT);
}
S.EndMultiColumn();
S.AddStandardButtons();
}
S.EndVerticalLay();
Layout();
Fit();
SetMinSize(GetSize());
Center();
return;
}
void NormalizeDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_NUMERIC);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Dominic Mazzoni"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartTwoColumn();
{
S.StartVerticalLay(false);
{
mDCCheckBox = S.Id(ID_DC_REMOVE).AddCheckBox(_("Remove any DC offset (center on 0.0 vertically)"),
mDC ? wxT("true") : wxT("false"));
mGainCheckBox = S.Id(ID_NORMALIZE_AMPLITUDE).AddCheckBox(_("Normalize maximum amplitude to:"),
mGain ? wxT("true") : wxT("false"));
S.StartHorizontalLay(wxALIGN_CENTER, false);
{
mLevelTextCtrl = S.Id(ID_LEVEL_TEXT).AddTextBox(wxT(""), wxT(""), 10);
mLevelTextCtrl->SetValidator(vld);
mLevelTextCtrl->SetName(_("Maximum amplitude dB"));
mLeveldB = S.AddVariableText(_("dB"), false,
wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
mWarning = S.AddVariableText( wxT(""), false,
wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
}
S.EndHorizontalLay();
mStereoIndCheckBox = S.AddCheckBox(_("Normalize stereo channels independently"),
mStereoInd ? wxT("true") : wxT("false"));
}
S.EndVerticalLay();
}
S.EndTwoColumn();
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("Choose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieTextBox(_("Minimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
}
void WaveformPrefs::PopulateOrExchange(ShuttleGui & S)
{
mPopulating = true;
S.SetBorder(2);
// S.StartStatic(_("Track Settings"));
{
mDefaultsCheckbox = 0;
if (mWt) {
/* i18n-hint: use is a verb */
mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("Use Preferences"), mDefaulted);
}
S.StartStatic(_("Display"));
{
S.StartTwoColumn();
{
S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
*(int*)&mTempSettings.scaleType,
&mScaleChoices);
}
S.EndTwoColumn();
}
S.EndStatic();
}
// S.EndStatic();
/*
S.StartStatic(_("Global settings"));
{
}
S.EndStatic();
*/
S.StartMultiColumn(2, wxALIGN_RIGHT);
{
S.Id(ID_APPLY).AddButton(_("Appl&y"));
}
S.EndMultiColumn();
mPopulating = false;
}
void BatchCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
mCommand->SetEditable(false);
mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
mEditParams->Enable( false ); // disable button as box is empty
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
mParameters->SetEditable(false);
}
S.EndMultiColumn();
S.StartStatic(_("C&hoose command"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
mChoices = S.Id(CommandsListID).AddListControl();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
for(int i=0;i<99;i++)
{
mChoices->InsertItem( i, wxString::Format(wxT("Item%02i"),i));
}
PopulateCommandList();
SetSize(350, 400);
SetSizeHints(GetSize());
Center();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange( ShuttleGui & S )
{
S.StartStatic( _("Key Bindings"), 1 );
mList = S.Id( CommandsListID ).AddListControlReportMode();
S.StartHorizontalLay( wxALIGN_LEFT, 0);
{
// LLL: Moved here from Populate. On the Mac, the control
// would not accept focus when using the mouse, but it
// would when tabbing to the field. Not really sure
// why...just glad it works now. :-)
// The SysKeyText ctrl is so special that we aren't
// going to include it into Audacity's version of ShuttleGui.
// So instead we create it here, and we can add it into
// the sizer scheme later...
mCurrentComboText = new SysKeyTextCtrl(
this, CurrentComboID, wxT(""),
wxDefaultPosition, wxSize(115, -1), 0 );
// AddWindow is a generic 'Add' for ShuttleGui.
// It allows us to add 'foreign' controls.
S.AddWindow( mCurrentComboText )->MoveAfterInTabOrder( mList );
S.Id( SetButtonID ).AddButton( _("S&et"));
S.Id( ClearButtonID ).AddButton( _("&Clear"));
}
S.EndHorizontalLay();
#ifdef __WXMAC__
S.AddFixedText( _("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartHorizontalLay( wxALIGN_LEFT, 0);
{
S.Id( AssignDefaultsButtonID ).AddButton( _("&Defaults"));
S.Id( SaveButtonID ).AddButton( _("&Save..."));
S.Id( LoadButtonID ).AddButton( _("&Load..."));
}
S.EndHorizontalLay();
S.EndStatic();
return;
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartHorizontalLay(wxALIGN_CENTRE, false);
{
S.Id(CategoryID);
mCat = S.AddChoice(_("C&ategory:"),
mCats[0],
&mCats);
}
S.EndHorizontalLay();
mList = S.Id(CommandsListID).AddListControlReportMode();
mList->SetName(_("Key Bindings"));
S.StartThreeColumn();
{
if (!mKey) {
mKey = new wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1));
#else
wxSize(210, -1));
#endif
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnCaptureKeyDown));
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnCaptureChar));
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
S.Id(SetButtonID).AddButton(_("Set"));
S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
void SplashDialog::Populate( ShuttleGui & S )
{
this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
bool bShow;
gPrefs->Read(wxT("/GUI/ShowSplashScreen"), &bShow, true );
S.StartVerticalLay(1);
//v For now, change to AudacityLogoWithName via old-fashioned ways, not Theme.
m_pLogo = new wxBitmap((const char **) AudacityLogoWithName_xpm); //v
// JKC: Resize to 50% of size. Later we may use a smaller xpm as
// our source, but this allows us to tweak the size - if we want to.
// It also makes it easier to revert to full size if we decide to.
const float fScale=0.5f;// smaller size.
wxImage RescaledImage( m_pLogo->ConvertToImage() );
// wxIMAGE_QUALITY_HIGH not supported by wxWidgets 2.6.1, or we would use it here.
RescaledImage.Rescale( int(LOGOWITHNAME_WIDTH * fScale), int(LOGOWITHNAME_HEIGHT *fScale) );
wxBitmap RescaledBitmap( RescaledImage );
m_pIcon =
new wxStaticBitmap(S.GetParent(), -1,
//*m_pLogo, //v theTheme.Bitmap(bmpAudacityLogoWithName),
RescaledBitmap,
wxDefaultPosition,
wxSize(int(LOGOWITHNAME_WIDTH*fScale), int(LOGOWITHNAME_HEIGHT*fScale)));
S.Prop(0).AddWindow( m_pIcon );
mpHtml = new LinkingHtmlWindow(S.GetParent(), -1,
wxDefaultPosition,
wxSize(506, 280),
wxHW_SCROLLBAR_AUTO | wxSUNKEN_BORDER );
mpHtml->SetPage(HelpText( wxT("welcome") ));
S.Prop(1).AddWindow( mpHtml, wxEXPAND );
S.Prop(0).StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol( 1 );// Column 1 is stretchy...
{
S.SetBorder( 5 );
S.Id( DontShowID).AddCheckBox( _("Don't show this again at start up"), bShow ? wxT("false") : wxT("true") );
wxButton *ok = new wxButton(S.GetParent(), wxID_OK);
ok->SetDefault();
S.SetBorder( 5 );
S.Prop(0).AddWindow( ok, wxALIGN_RIGHT| wxALL );
}
S.EndVerticalLay();
}
void EffectReverb::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(2);
#define SpinSlider(n, p) \
m ## n ## T = S.Id(ID_ ## n). \
AddSpinCtrl( p, DEF_ ## n, MAX_ ## n, MIN_ ## n); \
S.SetStyle(wxSL_HORIZONTAL); \
m ## n ## S = S.Id(ID_ ## n). \
AddSlider(wxT(""), DEF_ ## n, MAX_ ## n, MIN_ ## n);
SpinSlider(RoomSize, _("&Room Size (%):"));
SpinSlider(PreDelay, _("&Pre-delay (ms):"));
SpinSlider(Reverberance, _("Rever&berance (%):"));
SpinSlider(HfDamping, _("Da&mping (%):"));
SpinSlider(ToneLow, _("Tone &Low (%):"));
SpinSlider(ToneHigh, _("Tone &High (%):"));
SpinSlider(WetGain, _("Wet &Gain (dB):"));
SpinSlider(DryGain, _("Dr&y Gain (dB):"));
SpinSlider(StereoWidth, _("Stereo Wid&th (%):"));
#undef SpinSlider
}
S.EndMultiColumn();
S.StartHorizontalLay(wxCENTER, false);
{
mWetOnlyC = S.Id(ID_WetOnly).
AddCheckBox(_("Wet O&nly"), DEF_WetOnly ? wxT("true") : wxT("false"));
}
S.EndHorizontalLay();
return;
}
void SpectrumPrefs::PopulateOrExchange(ShuttleGui & S)
{
mPopulating = true;
S.SetBorder(2);
// S.StartStatic(_("Track Settings"));
// {
mDefaultsCheckbox = 0;
if (mWt) {
/* i18n-hint: use is a verb */
mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("Use Preferences"), mDefaulted);
}
S.StartStatic(_("Scale"));
{
S.StartTwoColumn();
{
S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
*(int*)&mTempSettings.scaleType,
&mScaleChoices);
mMinFreq =
S.Id(ID_MINIMUM).TieNumericTextBox(_("Mi&nimum Frequency (Hz):"),
mTempSettings.minFreq,
12);
mMaxFreq =
S.Id(ID_MAXIMUM).TieNumericTextBox(_("Ma&ximum Frequency (Hz):"),
mTempSettings.maxFreq,
12);
}
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("Colors"));
{
S.StartTwoColumn();
{
mGain =
S.Id(ID_GAIN).TieNumericTextBox(_("&Gain (dB):"),
mTempSettings.gain,
8);
mRange =
S.Id(ID_RANGE).TieNumericTextBox(_("&Range (dB):"),
mTempSettings.range,
8);
mFrequencyGain =
S.Id(ID_FREQUENCY_GAIN).TieNumericTextBox(_("Frequency g&ain (dB/dec):"),
mTempSettings.frequencyGain,
4);
}
S.Id(ID_GRAYSCALE).TieCheckBox(_("S&how the spectrum using grayscale colors"),
mTempSettings.isGrayscale);
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("Algorithm"));
{
S.StartMultiColumn(2);
{
mAlgorithmChoice =
S.Id(ID_ALGORITHM).TieChoice(_("A&lgorithm") + wxString(wxT(":")),
*(int*)&mTempSettings.algorithm,
&mAlgorithmChoices);
S.Id(ID_WINDOW_SIZE).TieChoice(_("Window &size:"),
mTempSettings.windowSize,
&mSizeChoices);
S.SetSizeHints(mSizeChoices);
S.Id(ID_WINDOW_TYPE).TieChoice(_("Window &type:"),
mTempSettings.windowType,
&mTypeChoices);
S.SetSizeHints(mTypeChoices);
#ifdef EXPERIMENTAL_ZERO_PADDED_SPECTROGRAMS
mZeroPaddingChoiceCtrl =
S.Id(ID_PADDING_SIZE).TieChoice(_("&Zero padding factor") + wxString(wxT(":")),
mTempSettings.zeroPaddingFactor,
&mZeroPaddingChoices);
S.SetSizeHints(mZeroPaddingChoices);
#endif
}
S.EndMultiColumn();
}
S.EndStatic();
#ifndef SPECTRAL_SELECTION_GLOBAL_SWITCH
S.Id(ID_SPECTRAL_SELECTION).TieCheckBox(_("Ena&ble Spectral Selection"),
mTempSettings.spectralSelection);
#endif
#ifdef EXPERIMENTAL_FFT_Y_GRID
S.TieCheckBox(_("Show a grid along the &Y-axis"),
mTempSettings.fftYGrid);
#endif //EXPERIMENTAL_FFT_Y_GRID
#ifdef EXPERIMENTAL_FIND_NOTES
/* i18n-hint: FFT stands for Fast Fourier Transform and probably shouldn't be translated*/
S.StartStatic(_("FFT Find Notes"));
{
S.StartTwoColumn();
{
mFindNotesMinA =
S.TieNumericTextBox(_("Minimum Amplitude (dB):"),
mTempSettings.fftFindNotes,
8);
mFindNotesN =
S.TieNumericTextBox(_("Max. Number of Notes (1..128):"),
mTempSettings.findNotesMinA,
8);
}
S.EndTwoColumn();
S.TieCheckBox(_("&Find Notes"),
mTempSettings.numberOfMaxima);
S.TieCheckBox(_("&Quantize Notes"),
mTempSettings.findNotesQuantize);
}
S.EndStatic();
#endif //EXPERIMENTAL_FIND_NOTES
// S.EndStatic();
#ifdef SPECTRAL_SELECTION_GLOBAL_SWITCH
S.StartStatic(_("Global settings"));
{
S.TieCheckBox(_("Ena&ble spectral selection"),
SpectrogramSettings::Globals::Get().spectralSelection);
}
S.EndStatic();
#endif
EnableDisableSTFTOnlyControls();
mPopulating = false;
}
void BassTrebleDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartStatic(wxT(""));
{
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
#ifdef __WXGTK__
// BoxSizer is to make first mnemonic work, on Linux.
wxPanel* cPanel = new wxPanel( this, wxID_ANY );
wxBoxSizer* cSizer = new wxBoxSizer(wxVERTICAL);
cPanel->SetSizer(cSizer);
#endif
wxTextValidator vld(wxFILTER_NUMERIC);
// Bass control
mBassT = S.Id(ID_BASS_TEXT).AddTextBox(_("&Bass (dB):"), wxT(""), 10);
mBassT->SetName(_("Bass (dB):"));
mBassT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mBassS = S.Id(ID_BASS_SLIDER).AddSlider(wxT(""), 0, BASS_MAX, BASS_MIN);
mBassS->SetName(_("Bass"));
mBassS->SetRange(BASS_MIN, BASS_MAX);
mBassS->SetPageSize(30);
// Treble control
mTrebleT = S.Id(ID_TREBLE_TEXT).AddTextBox(_("&Treble (dB):"), wxT(""), 10);
mTrebleT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mTrebleS = S.Id(ID_TREBLE_SLIDER).AddSlider(wxT(""), 0, TREBLE_MAX, TREBLE_MIN);
mTrebleS->SetName(_("Treble"));
mTrebleS->SetRange(TREBLE_MIN, TREBLE_MAX);
mTrebleS->SetPageSize(30);
// Level control
mLevelT = S.Id(ID_LEVEL_TEXT).AddTextBox(_("&Level (dB):"), wxT(""), 10);
mLevelT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mLevelS = S.Id(ID_LEVEL_SLIDER).AddSlider(wxT(""), 0, LEVEL_MAX, LEVEL_MIN);
mLevelS->SetName(_("Level"));
mLevelS->SetRange(LEVEL_MIN, LEVEL_MAX);
mLevelS->SetPageSize(30);
}
S.EndMultiColumn();
}
S.EndStatic();
// Normalize checkbox
S.StartHorizontalLay(wxLEFT, true);
{
mNormalizeCheckBox = S.Id(ID_NORMALIZE).AddCheckBox(_("&Enable level control"),
mbNormalize ? wxT("true") : wxT("false"));
mWarning = S.AddVariableText( wxT(""), false,
wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
}
S.EndHorizontalLay();
}
void ChangeTempoDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
wxTextValidator numvld(wxFILTER_NUMERIC);
S.SetBorder(10);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Change Tempo without Changing Pitch") +
wxString(wxT("\n\n")) +
_("by Vaughan Johnson && Dominic Mazzoni") +
wxString(wxT("\n")) +
_("using SoundTouch, by Olli Parviainen"));
}
S.EndHorizontalLay();
S.SetBorder(5);
//
S.StartMultiColumn(2, wxCENTER);
{
m_pTextCtrl_PercentChange = S.Id(ID_TEXT_PERCENTCHANGE)
.AddTextBox(_("Percent Change:"), wxT(""), 12);
m_pTextCtrl_PercentChange->SetValidator(numvld);
}
S.EndMultiColumn();
//
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_PercentChange = S.Id(ID_SLIDER_PERCENTCHANGE)
.AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
m_pSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
//
S.StartMultiColumn(5, wxCENTER);
{
//
S.AddUnits(_("Beats per minute:"));
m_pTextCtrl_FromBPM = S.Id(ID_TEXT_FROMBPM)
.AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromBPM->SetName(_("From beats per minute"));
m_pTextCtrl_FromBPM->SetValidator(numvld);
m_pTextCtrl_ToBPM = S.Id(ID_TEXT_TOBPM)
.AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToBPM->SetName(_("To beats per minute"));
m_pTextCtrl_ToBPM->SetValidator(numvld);
//
S.AddUnits(_("Length (seconds):"));
m_pTextCtrl_FromLength = S.Id(ID_TEXT_FROMLENGTH)
.AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromLength->SetName(_("From length in seconds"));
m_pTextCtrl_FromLength->SetValidator(nullvld);
m_pTextCtrl_ToLength = S.Id(ID_TEXT_TOLENGTH)
.AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToLength->SetName(_("To length in seconds"));
m_pTextCtrl_ToLength->SetValidator(numvld);
}
S.EndMultiColumn();
return;
}