Exemple #1
0
void WahwahDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_NUMERIC);

   S.SetBorder(5);
   S.AddSpace(0, 5);

   S.StartMultiColumn(3, wxCENTER);
   {
      wxSlider *s;
      wxTextCtrl * tempTC;
      tempTC = S.Id(ID_FREQTEXT).AddTextBox(_("LFO Frequency (Hz):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_FREQSLIDER).AddSlider(wxT(""), 100, FREQ_MAX, FREQ_MIN);
      s->SetName(_("LFO frequency in hertz"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_PHASETEXT).AddTextBox(_("LFO Start Phase (deg.):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_PHASESLIDER).AddSlider(wxT(""), 0, PHASE_MAX, PHASE_MIN);
      s->SetName(_("LFO start phase in degrees"));
      s->SetLineSize(10);
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_DEPTHTEXT).AddTextBox(_("Depth (%):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_DEPTHSLIDER).AddSlider(wxT(""), 0, DEPTH_MAX, DEPTH_MIN);
      s->SetName(_("Depth in percent"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_RESONANCETEXT).AddTextBox(_("Resonance:"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_RESONANCESLIDER).AddSlider(wxT(""), 0, RES_MAX, RES_MIN);
      s->SetName(_("Resonance"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_FREQOFFTEXT).AddTextBox(_("Wah Frequency Offset (%):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s  =S.Id(ID_FREQOFFSLIDER).AddSlider(wxT(""), 0, FREQOFF_MAX, FREQOFF_MIN);
      s->SetName(_("Wah frequency offset in percent"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif
   }
   S.EndMultiColumn();
}
Exemple #2
0
void ClickRemovalDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
   vld.SetIncludes(wxArrayString(10, numbers));

   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("Click and Pop Removal by Craig DeForest"));
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, false);
   {
      // Add a little space
   }
   S.EndHorizontalLay();

   S.StartMultiColumn(3, wxEXPAND);
   S.SetStretchyCol(2);
   {
      // Threshold
      mThreshT = S.Id(ID_THRESH_TEXT).AddTextBox(_("Select threshold (lower is more sensitive):"),
                                                  wxT(""),
                                                  10);
      mThreshT->SetValidator(vld);

      S.SetStyle(wxSL_HORIZONTAL);
      mThreshS = S.Id(ID_THRESH_SLIDER).AddSlider(wxT(""),
                                                  0,
                                                  MAX_THRESHOLD);
      mThreshS->SetName(_("Select threshold"));
      mThreshS->SetRange(MIN_THRESHOLD, MAX_THRESHOLD);
#if defined(__WXGTK__)
      // Force a minimum size since wxGTK allows it to go to zero
      mThreshS->SetMinSize(wxSize(100, -1));
#endif

      // Click width
      mWidthT = S.Id(ID_WIDTH_TEXT).AddTextBox(_("Max spike width (higher is more sensitive):"),
                                               wxT(""),
                                               10);
      mWidthT->SetValidator(vld);

      S.SetStyle(wxSL_HORIZONTAL);
      mWidthS = S.Id(ID_WIDTH_SLIDER).AddSlider(wxT(""),
                                                0,
                                                MAX_CLICK_WIDTH);
      mWidthS->SetName(_("Max spike width"));
      mWidthS->SetRange(MIN_CLICK_WIDTH, MAX_CLICK_WIDTH);
#if defined(__WXGTK__)
      // Force a minimum size since wxGTK allows it to go to zero
      mWidthS->SetMinSize(wxSize(100, -1));
#endif
   }
   S.EndMultiColumn();
   return;
}
Exemple #3
0
void BassBoostDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
   vld.SetIncludes(wxArrayString(10, numbers));

   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("by Nasca Octavian Paul"));
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, false);
   {
      // Add a little space
   }
   S.EndHorizontalLay();

   S.StartMultiColumn(3, wxEXPAND);
   S.SetStretchyCol(2);
   {
      // Frequency
      mFreqT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Frequency (Hz):"),
                                             wxT(""),
                                             10);
      mFreqT->SetValidator(vld);

      S.SetStyle(wxSL_HORIZONTAL);
      mFreqS = S.Id(ID_FREQ_SLIDER).AddSlider(wxT(""),
                                              0,
                                              FREQ_MAX);
      mFreqS->SetName(_("Frequency Hertz"));
      mFreqS->SetRange(FREQ_MIN, FREQ_MAX);

      // Boost
      mBoostT = S.Id(ID_BOOST_TEXT).AddTextBox(_("Boost (dB):"),
                                               wxT(""),
                                               10);
      mBoostT->SetValidator(vld);

      S.SetStyle(wxSL_HORIZONTAL);
      mBoostS = S.Id(ID_BOOST_SLIDER).AddSlider(wxT(""),
                                                0,
                                                BOOST_MAX);
      mBoostS->SetName(_("Boost dB"));
      mBoostS->SetRange(BOOST_MIN, BOOST_MAX);
   }
   S.EndMultiColumn();
   return;
}
Exemple #4
0
void EffectDtmf::PopulateOrExchange(ShuttleGui & S)
{
   // dialog will be passed values from effect
   // Effect retrieves values from saved config
   // Dialog will take care of using them to initialize controls
   // If there is a selection, use that duration, otherwise use
   // value from saved config: this is useful is user wants to
   // replace selection with dtmf sequence

   S.AddSpace(0, 5);
   S.StartMultiColumn(2, wxCENTER);
   {
      wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST, &dtmfSequence);
      vldDtmf.SetIncludes(wxArrayString(WXSIZEOF(kSymbols), kSymbols));
      mDtmfSequenceT = S.Id(ID_Sequence).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
      mDtmfSequenceT->SetValidator(vldDtmf);

      FloatingPointValidator<double> vldAmp(3, &dtmfAmplitude, NUM_VAL_NO_TRAILING_ZEROES);
      vldAmp.SetRange(MIN_Amplitude, MAX_Amplitude);
      S.Id(ID_Amplitude).AddTextBox(_("Amplitude (0-1):"), wxT(""), 10)->SetValidator(vldAmp);

      S.AddPrompt(_("Duration:"));
      mDtmfDurationT = safenew
         NumericTextCtrl(NumericConverter::TIME,
                         S.GetParent(),
                         ID_Duration,
                         GetDurationFormat(),
                         GetDuration(),
                         mProjectRate,
                         wxDefaultPosition,
                         wxDefaultSize,
                         true);
      mDtmfDurationT->SetName(_("Duration"));
      mDtmfDurationT->EnableMenu();
      S.AddWindow(mDtmfDurationT);

      S.AddFixedText(_("Tone/silence ratio:"), false);
      S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
      mDtmfDutyCycleS = S.Id(ID_DutyCycle).AddSlider( {},
                                                     dtmfDutyCycle * SCL_DutyCycle,
                                                     MAX_DutyCycle * SCL_DutyCycle, 
                                                     MIN_DutyCycle * SCL_DutyCycle);
      S.SetSizeHints(-1,-1);
   }
   S.EndMultiColumn();

   S.StartMultiColumn(2, wxCENTER);
   {
      S.AddFixedText(_("Duty cycle:"), false);
      mDtmfDutyT = S.AddVariableText(wxString::Format(wxT("%.1f %%"), dtmfDutyCycle), false);
      
      S.AddFixedText(_("Tone duration:"), false);
      mDtmfSilenceT = S.AddVariableText(wxString::Format(wxString(wxT("%.0f ")) + _("ms"), dtmfTone * 1000.0), false);

      S.AddFixedText(_("Silence duration:"), false);
      mDtmfToneT = S.AddVariableText(wxString::Format(wxString(wxT("%0.f ")) + _("ms"), dtmfSilence * 1000.0), false);
   }
   S.EndMultiColumn();
}
Exemple #5
0
void AmplifyDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_INCLUDE_CHAR_LIST);
   vld.SetIncludes(wxArrayString(12, numbers));

   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("by Dominic Mazzoni"));
   }
   S.EndHorizontalLay();

   S.StartHorizontalLay(wxCENTER, false);
   {
      // Add a little space
   }
   S.EndHorizontalLay();

   // Amplitude
   S.StartMultiColumn(2, wxCENTER);
   {
      mAmpT = S.Id(ID_AMP_TEXT).AddTextBox(_("Amplification (dB):"),
                                           wxT(""),
                                           12);
      mAmpT->SetValidator(vld);
   }
   S.EndMultiColumn();

   // Amplitude
   S.StartHorizontalLay(wxEXPAND);
   {
      S.SetStyle(wxSL_HORIZONTAL);
      mAmpS = S.Id(ID_AMP_SLIDER).AddSlider(wxT(""),
                                            0,
                                            AMP_MAX,
                                            AMP_MIN);
      mAmpS->SetName(_("Amplification (dB)"));
   }
   S.EndHorizontalLay();

   // Peek
   S.StartMultiColumn(2, wxCENTER);
   {
      mPeakT = S.Id(ID_PEAK_TEXT).AddTextBox(_("New Peak Amplitude (dB):"),
                                             wxT(""),
                                             12);
      // mPeakT->SetValidator(vld);
   }
   S.EndMultiColumn();

   // Clipping
   S.StartHorizontalLay(wxCENTER);
   {
      mClip = S.Id(ID_CLIP_CHECKBOX).AddCheckBox(_("Allow clipping"),
                                                 wxT("false"));
   }
   S.EndHorizontalLay();

   return;
}
Exemple #6
0
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
   wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
   vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));

   S.AddTitle(_("by Salvo Ventura"));

   S.StartMultiColumn(2, wxEXPAND);
   {
      mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
      mDtmfStringT->SetValidator(vldDtmf);

      // The added colon to improve visual consistency was placed outside 
      // the translatable strings to avoid breaking translations close to 2.0. 
      // TODO: Make colon part of the translatable string after 2.0.
      S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")),  dAmplitude, 10);

      S.AddPrompt(_("Duration:"));
      if (mDtmfDurationT == NULL)
      {
         mDtmfDurationT = new
            TimeTextCtrl(this,
                         ID_DTMF_DURATION_TEXT,
                         wxT(""),
                         dDuration,
                         mEffect->mProjectRate,
                         wxDefaultPosition,
                         wxDefaultSize,
                         true);
         /* use this instead of "seconds" because if a selection is passed to the
         * effect, I want it (dDuration) to be used as the duration, and with
         * "seconds" this does not always work properly. For example, it rounds
         * down to zero... */
         mDtmfDurationT->SetName(_("Duration"));
         mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
         mDtmfDurationT->EnableMenu();
      }
      S.AddWindow(mDtmfDurationT);

      S.AddFixedText(_("Tone/silence ratio:"), false);
      S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
      mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);

      S.SetSizeHints(-1,-1);
   }
   S.EndMultiColumn();

   S.StartMultiColumn(2, wxCENTER);
   {
      S.AddFixedText(_("Duty cycle:"), false);
      mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
      S.AddFixedText(_("Tone duration:"), false);
      mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"),  (int) dTone * 1000), false);
      S.AddFixedText(_("Silence duration:"), false);
      mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
   }
   S.EndMultiColumn();
}
void ChangeSpeedDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(10);
   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("Change Speed, affecting both Tempo and Pitch") +
                 wxString(wxT("\n\n")) +
                 _("by Vaughan Johnson && Dominic Mazzoni") +
                 wxString(wxT("\n")) +
                 _("using SampleRate, by Erik de Castro Lopo"));
   }
   S.EndHorizontalLay();
   S.SetBorder(5);

   //
   S.StartMultiColumn(2, wxCENTER);
   {
      mpTextCtrl_PercentChange = 
         S.Id(ID_TEXT_PERCENTCHANGE).AddTextBox(_("Percent Change:"), wxT(""), 12);
      wxTextValidator validator(wxFILTER_NUMERIC);
      mpTextCtrl_PercentChange->SetValidator(validator);
   }
   S.EndMultiColumn();

   //
   S.StartHorizontalLay(wxEXPAND);
   {
      S.SetStyle(wxSL_HORIZONTAL);
      mpSlider_PercentChange = 
         S.Id(ID_SLIDER_PERCENTCHANGE).AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
      mpSlider_PercentChange->SetName(_("Percent Change"));
   }
   S.EndHorizontalLay();

   // 
   S.StartMultiColumn(5, wxCENTER);
   {
      S.AddUnits(_("Standard Vinyl RPM:"));

      wxArrayString rpmStrings;
      rpmStrings.Add(wxT("33 1/3"));
      rpmStrings.Add(wxT("45"));
      rpmStrings.Add(wxT("78"));
      /* i18n-hint: n/a is an English abbreviation meaning "not applicable". */
      rpmStrings.Add(_("n/a"));

      mpChoice_FromVinyl = 
         S.Id(ID_CHOICE_FROMVINYL).AddChoice(_("from"), wxT(""), &rpmStrings);
      mpChoice_FromVinyl->SetName(_("From RPM"));
      mpChoice_FromVinyl->SetSizeHints(100, -1);

      mpChoice_ToVinyl = 
         S.Id(ID_CHOICE_TOVINYL).AddChoice(_("to"), wxT(""), &rpmStrings);
      mpChoice_ToVinyl->SetName(_("To RPM"));
      mpChoice_ToVinyl->SetSizeHints(100, -1);
   }
   S.EndMultiColumn();
}
void MacroCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
   S.StartVerticalLay(true);
   {
      S.StartMultiColumn(4, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
         mCommand->SetEditable(false);
         mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
         mEditParams->Enable(false); // disable button as box is empty
         mUsePreset = S.Id(UsePresetButtonID).AddButton(_("&Use Preset"));
         mUsePreset->Enable(false); // disable button as box is empty
      }
      S.EndMultiColumn();

      S.StartMultiColumn(2, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
         mParameters->SetEditable(false);
         wxString prompt{_("&Details")};
         S.Prop(0).AddPrompt(prompt);
         mDetails = S.AddTextWindow( wxT(""));
         mDetails->SetEditable(false);
         mDetails->SetName(wxStripMenuCodes(prompt));
      }
      S.EndMultiColumn();

      S.Prop(10).StartStatic(_("Choose command"), true);
      {
         S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
         mChoices = S.Id(CommandsListID).AddListControl();
      }
      S.EndStatic();
   }
   S.EndVerticalLay();

   S.AddStandardButtons( eOkButton | eCancelButton | eHelpButton);

   PopulateCommandList();
   if (mChoices->GetItemCount() > 0) {
      // set first item to be selected (and the focus when the
      // list first becomes the focus)
      mChoices->SetItemState(0, wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED,
         wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED);
   }

   SetMinSize(wxSize(780, 560));
   Fit();
   Center();
}
/// Defines the dialog and does data exchange with it.
void BatchProcessDialog::PopulateOrExchange(ShuttleGui &S)
{
   S.StartVerticalLay(true);
   {
      /*i18n-hint: A chain is a sequence of commands that can be applied
       * to one or more audio files.*/
      S.StartStatic(_("&Select Chain"), true);
      {
         S.SetStyle(wxSUNKEN_BORDER | wxLC_REPORT | wxLC_HRULES | wxLC_VRULES |
                     wxLC_SINGLE_SEL);
         mChains = S.Id(ChainsListID).AddListControlReportMode();
         mChains->InsertColumn(0, _("Chain"), wxLIST_FORMAT_LEFT);
      }
      S.EndStatic();

      S.StartHorizontalLay(wxALIGN_RIGHT, false);
      {
         S.SetBorder(10);
         S.Id(ApplyToProjectID).AddButton(_("Apply to Current &Project"));
         S.Id(ApplyToFilesID).AddButton(_("Apply to &Files..."));
         S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
      }
      S.EndHorizontalLay();
   }
   S.EndVerticalLay();

   wxArrayString names = mBatchCommands.GetNames();
   for (int i = 0; i < (int)names.GetCount(); i++) {
      mChains->InsertItem(i, names[i]);
   }

   // Get and validate the currently active chain
   wxString name = gPrefs->Read(wxT("/Batch/ActiveChain"), wxT(""));

   int item = mChains->FindItem(-1, name);
   if (item == -1) {
      item = 0;
      name = mChains->GetItemText(0);
   }

   // Select the name in the list...this will fire an event.
   mChains->SetItemState(item, wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED);

   Layout();
   Fit();
   SetSizeHints(GetSize());
   Center();

   // Set the column size for the chains list.
   wxSize sz = mChains->GetClientSize();
   mChains->SetColumnWidth(0, sz.x);
}
Exemple #10
0
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
   wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
   vldDtmf.SetIncludes(wxArrayString(20, dtmfSymbols));

   S.AddTitle(_("by Salvo Ventura (2006)"));

   S.StartMultiColumn(2, wxEXPAND);
   {
      mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
      mDtmfStringT->SetValidator(vldDtmf);

      S.AddPrompt(_("DTMF duration:"));
      mDtmfDurationT = new
         TimeTextCtrl(this,
                      ID_DTMF_DURATION_TEXT,
                      /*
                      use this instead of "seconds" because if a selection is passed to the effect,
                      I want it (dDuration) to be used as the duration, and with "seconds" this does
                      not always work properly. For example, it rounds down to zero...
                      */
                      TimeTextCtrl::GetBuiltinFormat(dIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))),
                      dDuration,
                      44100,
                      wxDefaultPosition,
                      wxDefaultSize,
                      true);
      S.AddWindow(mDtmfDurationT);
      mDtmfDurationT->EnableMenu();

      S.AddFixedText(_("Tone/silence ratio:"), false);
      S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
      mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX);
      mDtmfDutyS->SetRange(DUTY_MIN, DUTY_MAX);

      S.SetSizeHints(-1,-1);
   }
   S.EndMultiColumn();

   S.StartMultiColumn(2, wxCENTER);
   {
      S.AddFixedText(_("Duty cycle:"), false);
      mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
      S.AddFixedText(_("Tone duration:"), false);
      mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"),  (int) dTone * 1000), false);
      S.AddFixedText(_("Silence duration:"), false);
      mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
   }
   S.EndMultiColumn();
}
Exemple #11
0
void AmplifyDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_NUMERIC);

   S.AddSpace(0, 5);

   // Amplitude
   S.StartMultiColumn(2, wxCENTER);
   {
      mAmpT = S.Id(ID_AMP_TEXT).AddTextBox(_("Amplification (dB):"),
                                           wxT(""),
                                           12);
      mAmpT->SetValidator(vld);
   }
   S.EndMultiColumn();

   // Amplitude
   S.StartHorizontalLay(wxEXPAND);
   {
      S.SetStyle(wxSL_HORIZONTAL);
      mAmpS = S.Id(ID_AMP_SLIDER).AddSlider(wxT(""),
                                            0,
                                            AMP_MAX,
                                            AMP_MIN);
      mAmpS->SetName(_("Amplification dB"));
   }
   S.EndHorizontalLay();

   // Peek
   S.StartMultiColumn(2, wxCENTER);
   {
      mPeakT = S.Id(ID_PEAK_TEXT).AddTextBox(_("New Peak Amplitude (dB):"),
                                             wxT(""),
                                             12);
      mPeakT->SetValidator(vld);
   }
   S.EndMultiColumn();

   // Clipping
   S.StartHorizontalLay(wxCENTER);
   {
      mClip = S.Id(ID_CLIP_CHECKBOX).AddCheckBox(_("Allow clipping"),
                                                 wxT("false"));
   }
   S.EndHorizontalLay();

   return;
}
void BatchCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
   S.StartVerticalLay(true);
   {
      S.StartMultiColumn(3, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
         mCommand->SetEditable(false);
         mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
         mEditParams->Enable( false ); // disable button as box is empty
      }
      S.EndMultiColumn();

      S.StartMultiColumn(2, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
         mParameters->SetEditable(false);
      }
      S.EndMultiColumn();

      S.StartStatic(_("C&hoose command"), true);
      {
         S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
         mChoices = S.Id(CommandsListID).AddListControl();
      }
      S.EndStatic();
   }
   S.EndVerticalLay();

   S.AddStandardButtons();

   for(int i=0;i<99;i++)
   {
      mChoices->InsertItem( i, wxString::Format(wxT("Item%02i"),i));
   }
   PopulateCommandList();

   SetSize(350, 400);
   SetSizeHints(GetSize());
   Center();
}
Exemple #13
0
void EffectPhaser::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(5);
   S.AddSpace(0, 5);

   S.StartMultiColumn(3, wxEXPAND);
   {
      S.SetStretchyCol(2);

      IntegerValidator<int> vldStages(&mStages);
      vldStages.SetRange(MIN_Stages, MAX_Stages);
      mStagesT = S.Id(ID_Stages).AddTextBox(_("&Stages:"), wxT(""), 15);
      mStagesT->SetValidator(vldStages);

      S.SetStyle(wxSL_HORIZONTAL);
      mStagesS = S.Id(ID_Stages).AddSlider(wxT(""), DEF_Stages * SCL_Stages, MAX_Stages * SCL_Stages, MIN_Stages * SCL_Stages);
      mStagesS->SetName(_("Stages"));
      mStagesS->SetLineSize(2);
      mStagesS->SetMinSize(wxSize(100, -1));

      IntegerValidator<int> vldDryWet(&mDryWet);
      vldDryWet.SetRange(MIN_DryWet, MAX_DryWet);
      mDryWetT = S.Id(ID_DryWet).AddTextBox(_("&Dry/Wet:"), wxT(""), 15);
      mDryWetT->SetValidator(vldDryWet);

      S.SetStyle(wxSL_HORIZONTAL);
      mDryWetS = S.Id(ID_DryWet).AddSlider(wxT(""), DEF_DryWet * SCL_DryWet, MAX_DryWet * SCL_DryWet, MIN_DryWet * SCL_DryWet);
      mDryWetS->SetName(_("Dry Wet"));
      mDryWetS->SetMinSize(wxSize(100, -1));

      FloatingPointValidator<double> vldFreq(5, &mFreq, NUM_VAL_ONE_TRAILING_ZERO);
      vldFreq.SetRange(MIN_Freq, MAX_Freq);
      mFreqT = S.Id(ID_Freq).AddTextBox(_("LFO Freq&uency (Hz):"), wxT(""), 15);
      mFreqT->SetValidator(vldFreq);

      S.SetStyle(wxSL_HORIZONTAL);
      mFreqS = S.Id(ID_Freq).AddSlider(wxT(""), DEF_Freq * SCL_Freq, MAX_Freq * SCL_Freq, 0.0);
      mFreqS ->SetName(_("LFO frequency in hertz"));
      mFreqS ->SetMinSize(wxSize(100, -1));

      FloatingPointValidator<double> vldPhase(1, &mPhase);
      vldPhase.SetRange(MIN_Phase, MAX_Phase);
      mPhaseT = S.Id(ID_Phase).AddTextBox(_("LFO Sta&rt Phase (deg.):"), wxT(""), 15);
      mPhaseT->SetValidator(vldPhase);

      S.SetStyle(wxSL_HORIZONTAL);
      mPhaseS = S.Id(ID_Phase).AddSlider(wxT(""), DEF_Phase * SCL_Phase, MAX_Phase * SCL_Phase, MIN_Phase * SCL_Phase);
      mPhaseS->SetName(_("LFO start phase in degrees"));
      mPhaseS->SetLineSize(10);
      mPhaseS->SetMinSize(wxSize(100, -1));

      IntegerValidator<int> vldDepth(&mDepth);
      vldDepth.SetRange(MIN_Depth, MAX_Depth);
      mDepthT = S.Id(ID_Depth).AddTextBox(_("Dept&h:"), wxT(""), 15);
      mDepthT->SetValidator(vldDepth);

      S.SetStyle(wxSL_HORIZONTAL);
      mDepthS = S.Id(ID_Depth).AddSlider(wxT(""), DEF_Depth * SCL_Depth, MAX_Depth * SCL_Depth, MIN_Depth * SCL_Depth);
      mDepthS->SetName(_("Depth in percent"));
      mDepthS->SetMinSize(wxSize(100, -1));

      IntegerValidator<int> vldFeedback(&mFeedback);
      vldFeedback.SetRange(MIN_Feedback, MAX_Feedback);
      mFeedbackT = S.Id(ID_Feedback).AddTextBox(_("Feedbac&k (%):"), wxT(""), 15);
      mFeedbackT->SetValidator(vldFeedback);

      S.SetStyle(wxSL_HORIZONTAL);
      mFeedbackS = S.Id(ID_Feedback).AddSlider(wxT(""), DEF_Feedback * SCL_Feedback, MAX_Feedback * SCL_Feedback, MIN_Feedback * SCL_Feedback);
      mFeedbackS->SetName(_("Feedback in percent"));
      mFeedbackS->SetLineSize(10);
      mFeedbackS->SetMinSize(wxSize(100, -1));

      FloatingPointValidator<double> vldoutgain(1, &mOutGain);
      vldoutgain.SetRange(MIN_OutGain, MAX_OutGain);
      mOutGainT = S.Id(ID_OutGain).AddTextBox(_("&Output gain (dB):"), wxT(""), 12);
      mOutGainT->SetValidator(vldoutgain);

      S.SetStyle(wxSL_HORIZONTAL);
      mOutGainS = S.Id(ID_OutGain).AddSlider(wxT(""), DEF_OutGain * SCL_OutGain, MAX_OutGain * SCL_OutGain, MIN_OutGain * SCL_OutGain);
      mOutGainS->SetName(_("Output gain (dB)"));
      mOutGainS->SetMinSize(wxSize(100, -1));
   }
   S.EndMultiColumn();
}
Exemple #14
0
void EffectAmplify::PopulateOrExchange(ShuttleGui & S)
{
   if (IsBatchProcessing())
   {
      mPeak = 1.0;
   }
   else 
   {
      if (mPeak > 0.0)
      {
         mRatio = 1.0 / mPeak;
         mRatioClip = mRatio;
      }
      else
      {
         mRatio = 1.0;
      }
   }

   S.AddSpace(0, 5);

   S.StartVerticalLay(0);
   {
      int precission = 3; // allow (a generous) 3 decimal  places for Amplification (dB)
      // Amplitude
      S.StartMultiColumn(2, wxCENTER);
      {
         FloatingPointValidator<double> vldAmp(precission, &mAmp, NumValidatorStyle::ONE_TRAILING_ZERO);
         vldAmp.SetRange(MIN_Amp, MAX_Amp);
         mAmpT = S.Id(ID_Amp).AddTextBox(_("Amplification (dB):"), wxT(""), 12);
         mAmpT->SetValidator(vldAmp);
      }
      S.EndMultiColumn();

      // Amplitude
      S.StartHorizontalLay(wxEXPAND);
      {
         S.SetStyle(wxSL_HORIZONTAL);
         mAmpS = S.Id(ID_Amp).AddSlider( {}, 0, MAX_Amp * SCL_Amp, MIN_Amp * SCL_Amp);
         mAmpS->SetName(_("Amplification dB"));
      }
      S.EndHorizontalLay();

      // Peak
      S.StartMultiColumn(2, wxCENTER);
      {
         // One extra decimal place so that rounding is visible to user (see: bug 958)
         FloatingPointValidator<double> vldNewPeak(precission + 1, &mNewPeak, NumValidatorStyle::ONE_TRAILING_ZERO);
         double minAmp = MIN_Amp + LINEAR_TO_DB(mPeak);
         double maxAmp = MAX_Amp + LINEAR_TO_DB(mPeak);

         // min and max need same precision as what we're validating (bug 963)
         minAmp = Internat::CompatibleToDouble(Internat::ToString(minAmp, precission +1));
         maxAmp = Internat::CompatibleToDouble(Internat::ToString(maxAmp, precission +1));

         vldNewPeak.SetRange(minAmp, maxAmp);
         mNewPeakT = S.Id(ID_Peak).AddTextBox(_("New Peak Amplitude (dB):"), wxT(""), 12);
         mNewPeakT->SetValidator(vldNewPeak);
      }
      S.EndMultiColumn();

      // Clipping
      S.StartHorizontalLay(wxCENTER);
      {
         mClip = S.Id(ID_Clip).AddCheckBox(_("Allow clipping"), wxT("false"));
         if (IsBatchProcessing())
         {
            mClip->Enable(false);
            mCanClip = true;
         }
      }
      S.EndHorizontalLay();
   }
   S.EndVerticalLay();

   return;
}
Exemple #15
0
void PhaserDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator vld(wxFILTER_NUMERIC);

   S.SetBorder(5);

   S.StartMultiColumn(3, wxEXPAND);
   {
      wxSlider *s;
      wxTextCtrl * tempTC;
      S.SetStretchyCol(1);
      tempTC = S.Id(ID_PHASER_STAGESTEXT).AddTextBox(_("Stages:"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_PHASER_STAGESSLIDER).AddSlider(wxT(""), 2, STAGES_MAX, STAGES_MIN);
      s->SetName(_("Stages"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_PHASER_DRYWETTEXT).AddTextBox(_("Dry/Wet:"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_PHASER_DRYWETSLIDER).AddSlider(wxT(""), 0, DRYWET_MAX, DRYWET_MIN);
      s->SetName(_("Dry Wet"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_PHASER_FREQTEXT).AddTextBox(_("LFO Frequency (Hz):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_PHASER_FREQSLIDER).AddSlider(wxT(""), 100, FREQ_MAX, FREQ_MIN);
      s->SetName(_("LFO frequency in hertz"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_PHASER_PHASETEXT).AddTextBox(_("LFO Start Phase (deg.):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_PHASER_PHASESLIDER).AddSlider(wxT(""), 0, PHASE_MAX, PHASE_MIN);
      s->SetName(_("LFO start phase in degrees"));
      s->SetLineSize(10);
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_PHASER_DEPTHTEXT).AddTextBox(_("Depth:"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_PHASER_DEPTHSLIDER).AddSlider(wxT(""), 0, DEPTH_MAX, DEPTH_MIN);
      s->SetName(_("Depth in percent"));
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif

      tempTC = S.Id(ID_PHASER_FEEDBACKTEXT).AddTextBox(_("Feedback (%):"), wxT(""), 12);
      S.SetStyle(wxSL_HORIZONTAL);
      tempTC->SetValidator(vld);
      s = S.Id(ID_PHASER_FEEDBACKSLIDER).AddSlider(wxT(""), 0, FB_MAX, FB_MIN);
      s->SetName(_("Feedback in percent"));
      s->SetLineSize(10);
#if defined(__WXGTK__)
      s->SetMinSize(wxSize(100, -1));
#endif
   }
   S.EndMultiColumn();
}
Exemple #16
0
void EffectChangePitch::PopulateOrExchange(ShuttleGui & S)
{
   DeduceFrequencies(); // Set frequency-related control values based on sample.

   wxArrayString pitch;
   for (int ii = 0; ii < 12; ++ii)
      pitch.Add( PitchName( ii, PitchNameChoice::Both ) );

   S.SetBorder(5);

   S.StartVerticalLay(0);
   {
      S.StartVerticalLay();
      {
         S.AddTitle(_("Change Pitch without Changing Tempo"));
         S.AddTitle(
            wxString::Format(_("Estimated Start Pitch: %s%d (%.3f Hz)"),
                              pitch[m_nFromPitch], m_nFromOctave, m_FromFrequency));
      }
      S.EndVerticalLay();

      /* i18n-hint: (noun) Musical pitch.*/
      S.StartStatic(_("Pitch"));
      {
         S.StartMultiColumn(6, wxALIGN_CENTER); // 6 controls, because each AddChoice adds a wxStaticText and a wxChoice.
         {
            m_pChoice_FromPitch = S.Id(ID_FromPitch).AddChoice(_("from"), wxT(""), &pitch);
            m_pChoice_FromPitch->SetName(_("from"));
            m_pChoice_FromPitch->SetSizeHints(80, -1);

            m_pSpin_FromOctave = S.Id(ID_FromOctave).AddSpinCtrl( {}, m_nFromOctave, INT_MAX, INT_MIN);
            m_pSpin_FromOctave->SetName(_("from Octave"));
            m_pSpin_FromOctave->SetSizeHints(50, -1);

            m_pChoice_ToPitch = S.Id(ID_ToPitch).AddChoice(_("to"), wxT(""), &pitch);
            m_pChoice_ToPitch->SetName(_("to"));
            m_pChoice_ToPitch->SetSizeHints(80, -1);

            m_pSpin_ToOctave =
               S.Id(ID_ToOctave).AddSpinCtrl( {}, m_nToOctave, INT_MAX, INT_MIN);
            m_pSpin_ToOctave->SetName(_("to Octave"));
            m_pSpin_ToOctave->SetSizeHints(50, -1);
         }
         S.EndMultiColumn();

         S.StartHorizontalLay(wxALIGN_CENTER);
         {
            FloatingPointValidator<double> vldSemitones(2, &m_dSemitonesChange, NumValidatorStyle::TWO_TRAILING_ZEROES);
            m_pTextCtrl_SemitonesChange =
               S.Id(ID_SemitonesChange).AddTextBox(_("Semitones (half-steps):"), wxT(""), 12);
            m_pTextCtrl_SemitonesChange->SetName(_("Semitones (half-steps)"));
            m_pTextCtrl_SemitonesChange->SetValidator(vldSemitones);
         }
         S.EndHorizontalLay();
      }
      S.EndStatic();

      S.StartStatic(_("Frequency"));
      {
         S.StartMultiColumn(5, wxALIGN_CENTER); // 5, because AddTextBox adds a wxStaticText and a wxTextCtrl.
         {
            FloatingPointValidator<double> vldFromFrequency(3, &m_FromFrequency, NumValidatorStyle::THREE_TRAILING_ZEROES);
            vldFromFrequency.SetMin(0.0);
            m_pTextCtrl_FromFrequency = S.Id(ID_FromFrequency).AddTextBox(_("from"), wxT(""), 12);
            m_pTextCtrl_FromFrequency->SetName(_("from (Hz)"));
            m_pTextCtrl_FromFrequency->SetValidator(vldFromFrequency);

            FloatingPointValidator<double> vldToFrequency(3, &m_ToFrequency, NumValidatorStyle::THREE_TRAILING_ZEROES);
            vldToFrequency.SetMin(0.0);
            m_pTextCtrl_ToFrequency = S.Id(ID_ToFrequency).AddTextBox(_("to"), wxT(""), 12);
            m_pTextCtrl_ToFrequency->SetName(_("to (Hz)"));
            m_pTextCtrl_ToFrequency->SetValidator(vldToFrequency);

            S.AddUnits(_("Hz"));
         }
         S.EndMultiColumn();

         S.StartHorizontalLay(wxALIGN_CENTER);
         {
            FloatingPointValidator<double> vldPercentage(3, &m_dPercentChange, NumValidatorStyle::THREE_TRAILING_ZEROES);
            vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
            m_pTextCtrl_PercentChange = S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
            m_pTextCtrl_PercentChange->SetValidator(vldPercentage);
         }
         S.EndHorizontalLay();

         S.StartHorizontalLay(wxEXPAND);
         {
            S.SetStyle(wxSL_HORIZONTAL);
            m_pSlider_PercentChange = S.Id(ID_PercentChange)
               .AddSlider( {}, 0, (int)kSliderMax, (int)MIN_Percentage);
            m_pSlider_PercentChange->SetName(_("Percent Change"));
         }
         S.EndHorizontalLay();
      }
      S.EndStatic();

#if USE_SBSMS
      S.StartMultiColumn(2);
      {
         mUseSBSMSCheckBox = S.AddCheckBox(_("Use high quality stretching (slow)"),
                                             mUseSBSMS? wxT("true") : wxT("false"));
         mUseSBSMSCheckBox->SetValidator(wxGenericValidator(&mUseSBSMS));
      }
      S.EndMultiColumn();
#endif

   }
   S.EndVerticalLay();

   return;
}
void TimeScaleDialog::PopulateOrExchange(ShuttleGui & S)
{

   wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
   wxTextValidator numvld(wxFILTER_NUMERIC);

   S.SetBorder(5);
   S.AddSpace(0, 5);

   S.StartMultiColumn(2, 0);
   // Rate Start
   S.StartStatic(_("Initial Tempo Change (%)"));
   {
      S.StartMultiColumn(1, wxCENTER);
      {
         m_pTextCtrl_RatePercentChangeStart = S.Id(ID_TEXT_RATE_PERCENTCHANGE_START)
            .AddTextBox(wxT(""), wxT(""), 12);
         m_pTextCtrl_RatePercentChangeStart->SetValidator(numvld);
      }
      S.EndMultiColumn();
      S.StartHorizontalLay(wxEXPAND,0);
      {
         S.SetStyle(wxSL_HORIZONTAL);
         m_pSlider_RatePercentChangeStart = S.Id(ID_SLIDER_RATE_PERCENTCHANGE_START)
            .AddSlider(wxT(""), (int)RATE_PERCENTCHANGE_DEFAULT, (int)RATE_PERCENTCHANGE_MAX_SLIDER, (int)RATE_PERCENTCHANGE_MIN_SLIDER);
      }
      S.EndHorizontalLay();
   }
   S.EndStatic();

   S.StartStatic(_("Final Tempo Change (%)"));
   {
      S.StartMultiColumn(1, wxCENTER);
      {
         m_pTextCtrl_RatePercentChangeEnd = S.Id(ID_TEXT_RATE_PERCENTCHANGE_END)
            .AddTextBox(wxT(""), wxT(""), 12);
         m_pTextCtrl_RatePercentChangeEnd->SetValidator(numvld);
      }
      S.EndMultiColumn();
      S.StartHorizontalLay(wxEXPAND,0);
      {         
         S.SetStyle(wxSL_HORIZONTAL);
         m_pSlider_RatePercentChangeEnd = S.Id(ID_SLIDER_RATE_PERCENTCHANGE_END)
            .AddSlider(wxT(""), (int)RATE_PERCENTCHANGE_DEFAULT, (int)RATE_PERCENTCHANGE_MAX_SLIDER, (int)RATE_PERCENTCHANGE_MIN_SLIDER);
      }
      S.EndHorizontalLay();
   }
   S.EndStatic();

   // Pitch Start
   S.StartStatic(_("Initial Pitch Shift"));
   {
      S.StartMultiColumn(2, wxCENTER);
      {
         m_pTextCtrl_PitchHalfStepsStart = S.Id(ID_TEXT_PITCH_HALFSTEPS_START)
            .AddTextBox(_("(semitones) [-12 to 12]:"), wxT(""), 12);
         m_pTextCtrl_PitchHalfStepsStart->SetValidator(numvld);
         
         m_pTextCtrl_PitchPercentChangeStart = S.Id(ID_TEXT_PITCH_PERCENTCHANGE_START)
            .AddTextBox(_("(%) [-50 to 100]:"), wxT(""), 12);
         m_pTextCtrl_PitchPercentChangeStart->SetValidator(numvld);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   // Pitch End
   S.StartStatic(_("Final Pitch Shift"));
   {
      S.StartMultiColumn(2, wxCENTER);
      {
         m_pTextCtrl_PitchHalfStepsEnd = S.Id(ID_TEXT_PITCH_HALFSTEPS_END)
            .AddTextBox(_("(semitones) [-12 to 12]:"), wxT(""), 12);
         m_pTextCtrl_PitchHalfStepsEnd->SetValidator(numvld);
         
         m_pTextCtrl_PitchPercentChangeEnd = S.Id(ID_TEXT_PITCH_PERCENTCHANGE_END)
            .AddTextBox(_("(%) [-50 to 100]:"), wxT(""), 12);
         m_pTextCtrl_PitchPercentChangeEnd->SetValidator(numvld);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
   S.EndMultiColumn();

   return;
}
Exemple #18
0
void ChangeTempoDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
   wxTextValidator numvld(wxFILTER_NUMERIC);

   S.SetBorder(10);
   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("Change Tempo without Changing Pitch") +
                 wxString(wxT("\n\n")) +
                 _("by Vaughan Johnson && Dominic Mazzoni") +
                 wxString(wxT("\n")) + 
                 _("using SoundTouch, by Olli Parviainen"));
   }
   S.EndHorizontalLay();
   S.SetBorder(5);

   //
   S.StartMultiColumn(2, wxCENTER);
   {
      m_pTextCtrl_PercentChange = S.Id(ID_TEXT_PERCENTCHANGE)
         .AddTextBox(_("Percent Change:"), wxT(""), 12);
      m_pTextCtrl_PercentChange->SetValidator(numvld);
   }
   S.EndMultiColumn();

   //
   S.StartHorizontalLay(wxEXPAND);
   {
      S.SetStyle(wxSL_HORIZONTAL);
      m_pSlider_PercentChange = S.Id(ID_SLIDER_PERCENTCHANGE)
         .AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
      m_pSlider_PercentChange->SetName(_("Percent Change"));
   }
   S.EndHorizontalLay();

   // 
   S.StartMultiColumn(5, wxCENTER);
   {
      //
      S.AddUnits(_("Beats per minute:"));

      m_pTextCtrl_FromBPM = S.Id(ID_TEXT_FROMBPM)
         .AddTextBox(_("from"), wxT(""), 12);
      m_pTextCtrl_FromBPM->SetName(_("From beats per minute"));
      m_pTextCtrl_FromBPM->SetValidator(numvld);

      m_pTextCtrl_ToBPM = S.Id(ID_TEXT_TOBPM)
         .AddTextBox(_("to"), wxT(""), 12);
      m_pTextCtrl_ToBPM->SetName(_("To beats per minute"));
      m_pTextCtrl_ToBPM->SetValidator(numvld);

      //
      S.AddUnits(_("Length (seconds):"));

      m_pTextCtrl_FromLength = S.Id(ID_TEXT_FROMLENGTH)
         .AddTextBox(_("from"), wxT(""), 12);
      m_pTextCtrl_FromLength->SetName(_("From length in seconds"));
      m_pTextCtrl_FromLength->SetValidator(nullvld);

      m_pTextCtrl_ToLength = S.Id(ID_TEXT_TOLENGTH)
         .AddTextBox(_("to"), wxT(""), 12);
      m_pTextCtrl_ToLength->SetName(_("To length in seconds"));
      m_pTextCtrl_ToLength->SetValidator(numvld);
   }
   S.EndMultiColumn();

   return;
}
Exemple #19
0
void EffectScienFilter::PopulateOrExchange(ShuttleGui & S)
{
   wxWindow *parent = S.GetParent();

   S.AddSpace(5);
   S.SetSizerProportion(1);
   S.StartMultiColumn(3, wxEXPAND);
   {
      S.SetStretchyCol(1);
      S.SetStretchyRow(0);

      // -------------------------------------------------------------------
      // ROW 1: Freq response panel and sliders for vertical scale
      // -------------------------------------------------------------------

      S.StartVerticalLay();
      {
         mdBRuler = new RulerPanel(parent, wxID_ANY);
         mdBRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
         mdBRuler->ruler.SetOrientation(wxVERTICAL);
         mdBRuler->ruler.SetRange(30.0, -120.0);
         mdBRuler->ruler.SetFormat(Ruler::LinearDBFormat);
         mdBRuler->ruler.SetUnits(_("dB"));
         mdBRuler->ruler.SetLabelEdges(true);
         int w;
         mdBRuler->ruler.GetMaxSize(&w, NULL);
         mdBRuler->SetSize(wxSize(w, 150));  // height needed for wxGTK

         S.SetBorder(1);
         S.AddSpace(1, 1);
         S.Prop(1);
         S.AddWindow(mdBRuler, wxALIGN_RIGHT | wxTOP);
         S.AddSpace(1, 1);
      }
      S.EndVerticalLay();

      mPanel = new EffectScienFilterPanel(this, parent);
      mPanel->SetFreqRange(mLoFreq, mNyquist);

      S.SetBorder(5);
      S.Prop(1);
      S.AddWindow(mPanel, wxEXPAND | wxRIGHT);
      S.SetSizeHints(-1, -1);

      S.StartVerticalLay();
      {
         S.AddVariableText(_("+ dB"), false, wxCENTER);
         S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
         mdBMaxSlider = S.Id(ID_dBMax).AddSlider(wxT(""), 10, 20, 0);
#if wxUSE_ACCESSIBILITY
         mdBMaxSlider->SetName(_("Max dB"));
         mdBMaxSlider->SetAccessible(new SliderAx(mdBMaxSlider, wxString(wxT("%d ")) + _("dB")));
#endif

         S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
         mdBMinSlider = S.Id(ID_dBMin).AddSlider(wxT(""), -10, -10, -120);
         S.AddVariableText(_("- dB"), false, wxCENTER);
#if wxUSE_ACCESSIBILITY
         mdBMinSlider->SetName(_("Min dB"));
         mdBMinSlider->SetAccessible(new SliderAx(mdBMinSlider, wxString(wxT("%d ")) + _("dB")));
#endif
      }
      S.EndVerticalLay();

      // -------------------------------------------------------------------
      // ROW 2: Frequency ruler
      // -------------------------------------------------------------------

      S.AddSpace(1, 1);

      mfreqRuler  = new RulerPanel(parent, wxID_ANY);
      mfreqRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
      mfreqRuler->ruler.SetOrientation(wxHORIZONTAL);
      mfreqRuler->ruler.SetLog(true);
      mfreqRuler->ruler.SetRange(mLoFreq, mNyquist);
      mfreqRuler->ruler.SetFormat(Ruler::IntFormat);
      mfreqRuler->ruler.SetUnits(wxT(""));
      mfreqRuler->ruler.SetFlip(true);
      mfreqRuler->ruler.SetLabelEdges(true);
      int h;
      mfreqRuler->ruler.GetMaxSize(NULL, &h);
      mfreqRuler->SetMinSize(wxSize(-1, h));

      S.Prop(1);
      S.AddWindow(mfreqRuler, wxEXPAND | wxALIGN_LEFT | wxRIGHT);

      S.AddSpace(1, 1);

      // -------------------------------------------------------------------
      // ROW 3 and 4: Type, Order, Ripple, Subtype, Cutoff
      // -------------------------------------------------------------------

      S.AddSpace(1, 1);
      S.SetSizerProportion(0);
      S.StartMultiColumn(8, wxALIGN_CENTER);
      {
         wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));

         wxArrayString typeChoices;
         for (int i = 0; i < kNumTypes; i++)
         {
            typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
         }

         mFilterTypeCtl = S.Id(ID_Type).AddChoice(_("&Filter Type:"), wxT(""), &typeChoices);
         mFilterTypeCtl->SetValidator(wxGenericValidator(&mFilterType));
         S.SetSizeHints(-1, -1);

         wxArrayString orders;
         for (int i = 1; i <= 10; i++)
         {
            orders.Add(wxString::Format(wxT("%d"), i));
         }
         /*i18n-hint: 'Order' means the complexity of the filter, and is a number between 1 and 10.*/
         mFilterOrderCtl = S.Id(ID_Order).AddChoice(_("O&rder:"), wxT(""), &orders);
         mFilterOrderCtl->SetValidator(wxGenericValidator(&mOrderIndex));
         S.SetSizeHints(-1, -1);
         S.AddSpace(1, 1);

         FloatingPointValidator<float> vldRipple(1, &mRipple);
         vldRipple.SetRange(MIN_Passband, MAX_Passband);
         
         mRippleCtlP = S.AddVariableText(_("&Passband Ripple:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
         mRippleCtl = S.Id(ID_Ripple).AddTextBox(wxT(""), wxT(""), 10);
         mRippleCtl->SetName(_("Passband Ripple (dB)"));
         mRippleCtl->SetValidator(vldRipple);
         mRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);

         wxASSERT(kNumSubTypes == WXSIZEOF(kSubTypeStrings));

         wxArrayString subTypeChoices;
         for (int i = 0; i < kNumSubTypes; i++)
         {
            subTypeChoices.Add(wxGetTranslation(kSubTypeStrings[i]));
         }

         mFilterSubTypeCtl = S.Id(ID_SubType).AddChoice(_("&Subtype:"), wxT(""), &subTypeChoices);
         mFilterSubTypeCtl->SetValidator(wxGenericValidator(&mFilterSubtype));
         S.SetSizeHints(-1, -1);
      
         FloatingPointValidator<float> vldCutoff(1, &mCutoff);
         vldCutoff.SetRange(MIN_Cutoff, mNyquist - 1);
         
         mCutoffCtl = S.Id(ID_Cutoff).AddTextBox(_("C&utoff:"), wxT(""), 10);
         mCutoffCtl->SetName(_("Cutoff (Hz)"));
         mCutoffCtl->SetValidator(vldCutoff);
         S.AddUnits(_("Hz"));

         FloatingPointValidator<float> vldStopbandRipple(1, &mStopbandRipple);
         vldStopbandRipple.SetRange(MIN_Stopband, MAX_Stopband);
         
         mStopbandRippleCtlP = S.AddVariableText(_("Minimum S&topband Attenuation:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
         mStopbandRippleCtl = S.Id(ID_StopbandRipple).AddTextBox(wxT(""), wxT(""), 10);
         mStopbandRippleCtl->SetName(_("Minimum S&topband Attenuation (dB)"));
         mStopbandRippleCtl->SetValidator(vldStopbandRipple);
         mStopbandRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
      }
      S.EndMultiColumn();
      S.AddSpace(1, 1);
   }
   S.EndMultiColumn();

   mFilterTypeCtl->SetFocus();

   return;
}
Exemple #20
0
void NoiseRemovalDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.StartStatic(_("Step 1"));
   {
      S.AddVariableText(_("Select a few seconds of just noise so Audacity knows what to filter out,\nthen click Get Noise Profile:"));
      m_pButton_GetProfile = S.Id(ID_BUTTON_GETPROFILE).AddButton(_("&Get Noise Profile"));
   }
   S.EndStatic();

   S.StartStatic(_("Step 2"));
   {
      S.AddVariableText(_("Select all of the audio you want filtered, choose how much noise you want\nfiltered out, and then click 'OK' to remove noise.\n"));

      S.StartMultiColumn(3, wxEXPAND);
      S.SetStretchyCol(2);
      {
         wxTextValidator vld(wxFILTER_NUMERIC);
         mGainT = S.Id(ID_GAIN_TEXT).AddTextBox(_("Noise re&duction (dB):"), wxT(""), 0);
         S.SetStyle(wxSL_HORIZONTAL);
         mGainT->SetValidator(vld);
         mGainS = S.Id(ID_GAIN_SLIDER).AddSlider(wxT(""), 0, GAIN_MAX);
         mGainS->SetName(_("Noise reduction"));
         mGainS->SetRange(GAIN_MIN, GAIN_MAX);
         mGainS->SetSizeHints(150, -1);

         mSensitivityT = S.Id(ID_SENSITIVITY_TEXT).AddTextBox(_("&Sensitivity (dB):"),
                                                wxT(""),
                                                0);
         S.SetStyle(wxSL_HORIZONTAL);
         mSensitivityT->SetValidator(vld);
         mSensitivityS = S.Id(ID_SENSITIVITY_SLIDER).AddSlider(wxT(""), 0, SENSITIVITY_MAX);
         mSensitivityS->SetName(_("Sensitivity"));
         mSensitivityS->SetRange(SENSITIVITY_MIN, SENSITIVITY_MAX);
         mSensitivityS->SetSizeHints(150, -1);

         mFreqT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Fr&equency smoothing (Hz):"),
                                                wxT(""),
                                                0);
         S.SetStyle(wxSL_HORIZONTAL);
         mFreqT->SetValidator(vld);
         mFreqS = S.Id(ID_FREQ_SLIDER).AddSlider(wxT(""), 0, FREQ_MAX);
         mFreqS->SetName(_("Frequency smoothing"));
         mFreqS->SetRange(FREQ_MIN, FREQ_MAX);
         mFreqS->SetSizeHints(150, -1);

         mTimeT = S.Id(ID_TIME_TEXT).AddTextBox(_("Attac&k/decay time (secs):"),
                                                wxT(""),
                                                0);
         S.SetStyle(wxSL_HORIZONTAL);
         mTimeT->SetValidator(vld);
         mTimeS = S.Id(ID_TIME_SLIDER).AddSlider(wxT(""), 0, TIME_MAX);
         mTimeS->SetName(_("Attack/decay time"));
         mTimeS->SetRange(TIME_MIN, TIME_MAX);
         mTimeS->SetSizeHints(150, -1);

         S.AddPrompt(_("Noise:"));
         mKeepSignal = S.Id(ID_RADIOBUTTON_KEEPSIGNAL)
               .AddRadioButton(_("Re&move"));
         mKeepNoise = S.Id(ID_RADIOBUTTON_KEEPNOISE)
               .AddRadioButtonToGroup(_("&Isolate"));
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
}
/// Defines the dialog and does data exchange with it.
void EditChainsDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.StartHorizontalLay(wxEXPAND, 1);
   {
      S.StartStatic(_("&Chains"));
      {
         // JKC: Experimenting with an alternative way to get multiline
         // translated strings to work correctly without very long lines.
         // My appologies Alexandre if this way didn't work either.
         //
         // With this method:
         //   1) it compiles fine under windows unicode and normal mode.
         //   2) xgettext source code has handling for the trailing '\'
         //
         // It remains to see if linux and mac can cope and if xgettext
         // actually does do fine with strings presented like this.
         // If it doesn't work out, revert to all-on-one-line.
         S.SetStyle(wxSUNKEN_BORDER | wxLC_REPORT | wxLC_HRULES | wxLC_SINGLE_SEL |
                    wxLC_EDIT_LABELS);
         mChains = S.Id(ChainsListID).AddListControlReportMode();
         mChains->InsertColumn(0, wxT("Chain"), wxLIST_FORMAT_LEFT);
         S.StartHorizontalLay(wxCENTER, false);
         {
            S.Id(AddButtonID).AddButton(_("&Add"));
            mRemove = S.Id(RemoveButtonID).AddButton(_("&Remove"));
            mRename = S.Id(RenameButtonID).AddButton(_("Re&name"));
         }
         S.EndHorizontalLay();
      }
      S.EndStatic();

      S.StartStatic(_("C&hain (Double-Click or press SPACE to edit)"), true);
      {
         S.SetStyle(wxSUNKEN_BORDER | wxLC_REPORT | wxLC_HRULES | wxLC_VRULES |
                    wxLC_SINGLE_SEL);
         mList = S.Id(CommandsListID).AddListControlReportMode();

         //An empty first column is a workaround - under Win98 the first column
         //can't be right aligned.
         mList->InsertColumn(BlankColumn, wxT(""), wxLIST_FORMAT_LEFT);
         /* i18n-hint: This is the number of the command in the list */
         mList->InsertColumn(ItemNumberColumn, _("Num"), wxLIST_FORMAT_RIGHT);
         mList->InsertColumn(ActionColumn, _("Command  "), wxLIST_FORMAT_RIGHT);
         mList->InsertColumn(ParamsColumn, _("Parameters"), wxLIST_FORMAT_LEFT);

         S.StartHorizontalLay(wxCENTER, false);
         {
            S.Id(InsertButtonID).AddButton(_("&Insert"), wxALIGN_LEFT);
            S.Id(DeleteButtonID).AddButton(_("De&lete"), wxALIGN_LEFT);
            S.Id(UpButtonID).AddButton(_("Move &Up"), wxALIGN_LEFT);
            S.Id(DownButtonID).AddButton(_("Move &Down"), wxALIGN_LEFT);
            mDefaults = S.Id(DefaultsButtonID).AddButton(_("De&faults"));
         }
         S.EndHorizontalLay();
      }
      S.EndStatic();
   }
   S.EndHorizontalLay();

   S.AddStandardButtons();

   return;
}
Exemple #22
0
void VampEffect::PopulateOrExchange(ShuttleGui & S)
{
   Vamp::Plugin::ProgramList programs = mPlugin->getPrograms();

   mParameters = mPlugin->getParameterDescriptors();

   auto count = mParameters.size();

   mToggles.reinit( count );
   mSliders.reinit( count );
   mFields.reinit( count );
   mLabels.reinit( count );
   mChoices.reinit( count );
   mValues.reinit( count );

   S.SetStyle(wxVSCROLL | wxTAB_TRAVERSAL);
   wxScrolledWindow *scroller = S.StartScroller(2);
   {
      S.StartStatic(_("Plugin Settings"));
      {
         S.StartMultiColumn(5, wxEXPAND);
         {
            S.SetStretchyCol(3);

            if (!programs.empty())
            {
               wxString currentProgram =  wxString::FromUTF8(mPlugin->getCurrentProgram().c_str());

               wxArrayStringEx choices;
               for (size_t i = 0, cnt = programs.size(); i < cnt; i++)
               {
                  choices.push_back(wxString::FromUTF8(programs[i].c_str()));
               }

               S.AddPrompt(_("Program"));

               S.Id(ID_Program);
               mProgram = S.AddChoice(
                  {},
                  choices,
                  choices.Index( currentProgram )
               );
               mProgram->SetName(_("Program"));
               mProgram->SetSizeHints(-1, -1);
               wxSizer *s = mProgram->GetContainingSizer();
               s->GetItem(mProgram)->SetFlag(wxEXPAND | wxALIGN_CENTER_VERTICAL | wxALL);

               S.AddSpace(1, 1);
               S.AddSpace(1, 1);
               S.AddSpace(1, 1);
            }

            for (size_t p = 0; p < count; p++)
            {
               wxString tip = wxString::FromUTF8(mParameters[p].description.c_str());
               wxString unit = wxString::FromUTF8(mParameters[p].unit.c_str());

               float value = mPlugin->getParameter(mParameters[p].identifier);

               mToggles[p] = NULL;
               mChoices[p] = NULL;
               mSliders[p] = NULL;
               mFields[p] = NULL;
               mValues[p] = 0.0;

               wxString labelText = wxString::FromUTF8(mParameters[p].name.c_str());
               if (!unit.empty())
               {
                  labelText += wxT(" (") + unit + wxT(")");
               }
               S.AddPrompt(labelText + wxT(":"));

               if (mParameters[p].isQuantized &&
                   mParameters[p].quantizeStep == 1.0 &&
                   mParameters[p].minValue == 0.0 &&
                   mParameters[p].maxValue == 1.0)
               {
                  S.Id(ID_Toggles + p);
                  mToggles[p] = S.AddCheckBox( {},
                                              value > 0.5);
                  mToggles[p]->SetName(labelText);
                  if (!tip.empty())
                  {
                     mToggles[p]->SetToolTip(tip);
                  }
                  wxSizer *s = mToggles[p]->GetContainingSizer();
                  s->GetItem(mToggles[p])->SetFlag(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);

                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);

               }
               else if (mParameters[p].isQuantized &&
                        mParameters[p].quantizeStep == 1.0 &&
                        !mParameters[p].valueNames.empty())
               {
                  wxArrayStringEx choices;
                  int selected = -1;

                  for (size_t i = 0, cnt = mParameters[p].valueNames.size(); i < cnt; i++)
                  {
                     wxString choice = wxString::FromUTF8(mParameters[p].valueNames[i].c_str());
                     if (size_t(value - mParameters[p].minValue + 0.5) == i)
                     {
                        selected = i;
                     }
                     choices.push_back(choice);
                  }

                  S.Id(ID_Choices + p);
                  mChoices[p] = S.AddChoice( {}, choices, selected );
                  mChoices[p]->SetName(labelText);
                  mChoices[p]->SetSizeHints(-1, -1);
                  if (!tip.empty())
                  {
                     mChoices[p]->SetToolTip(tip);
                  }
                  wxSizer *s = mChoices[p]->GetContainingSizer();
                  s->GetItem(mChoices[p])->SetFlag(wxEXPAND | wxALIGN_CENTER_VERTICAL | wxALL);

                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);
               }
               else
               {
                  mValues[p] = value;
                  FloatingPointValidator<float> vld(6, &mValues[p]);
                  vld.SetRange(mParameters[p].minValue, mParameters[p].maxValue);

                  float range = mParameters[p].maxValue - mParameters[p].minValue;
                  auto style = range < 10 ? NumValidatorStyle::THREE_TRAILING_ZEROES :
                              range < 100 ? NumValidatorStyle::TWO_TRAILING_ZEROES :
                              NumValidatorStyle::ONE_TRAILING_ZERO;
                  vld.SetStyle(style);

                  S.Id(ID_Texts + p);
                  mFields[p] = S.AddTextBox( {}, wxT(""), 12);
                  mFields[p]->SetName(labelText);
                  mFields[p]->SetValidator(vld);
                  if (!tip.empty())
                  {
                     mFields[p]->SetToolTip(tip);
                  }
                  wxSizer *s = mFields[p]->GetContainingSizer();
                  s->GetItem(mFields[p])->SetFlag(wxALIGN_CENTER_VERTICAL | wxALL);

                  wxString str = Internat::ToDisplayString(mParameters[p].minValue);
                  S.AddPrompt(str);

                  S.SetStyle(wxSL_HORIZONTAL);
                  S.Id(ID_Sliders + p);
                  mSliders[p] = S.AddSlider( {}, 0, 1000, 0);
                  mSliders[p]->SetName(labelText);
                  mSliders[p]->SetSizeHints(150, -1);
                  if (!tip.empty())
                  {
                     mSliders[p]->SetToolTip(tip);
                  }
                  
                  str = Internat::ToDisplayString(mParameters[p].maxValue);
                  S.AddUnits(str);
               }
            }
         }
         S.EndMultiColumn();
      }
      S.EndStatic();
   }
   S.EndScroller();

   scroller->SetScrollRate(0, 20);

   return;
}
void NoiseRemovalDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxString step1Label;
   wxString step1Prompt;
   wxString step2Label;
   wxString step2Prompt;

   bool bCleanSpeechMode = false;

   AudacityProject * project = GetActiveProject();
   if( project && project->GetCleanSpeechMode() ) {
      bCleanSpeechMode = true;
   }

   if (bCleanSpeechMode) {
      // We're not marking these as translatable because most people
      // don't use CleanSpeech so it'd be a waste of time for most
      // translators
      step1Label = wxT("Preparation Step");
      step1Prompt = wxT("Listen carefully to section with some speech "
                        wxT("and some silence to check before/after.\n")
                        wxT("Select a few seconds of just noise ('thinner' ")
                        wxT("part of wave pattern usually between\nspoken ")
                        wxT("phrases or during pauses) so Audacity knows ")
                        wxT("what to filter out, then click"));
      step2Label = wxT("Actually Remove Noise");
      step2Prompt = wxT("Select what part of the audio you want filtered "
                        wxT("(Ctrl-A = All), chose how much noise\nyou want ")
                        wxT("filtered out with sliders below, and then click ")
                        wxT("'OK' to remove noise.\nFind best setting with ")
                        wxT("Ctrl-Z to Undo, Select All, and change ")
                        wxT("the slider positions."));
   }
   else {
      step1Label = _("Step 1");
      step1Prompt = _("Select a few seconds of just noise so Audacity knows what to filter out,\nthen click Get Noise Profile:");
      step2Label = _("Step 2");
      step2Prompt = _("Select all of the audio you want filtered, choose how much noise you want\nfiltered out, and then click 'OK' to remove noise.\n");
   }

   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("Noise Removal by Dominic Mazzoni"));
   }
   S.EndHorizontalLay();
   
   S.StartStatic(step1Label);
   {
      S.AddVariableText(step1Prompt);
      m_pButton_GetProfile = S.Id(ID_BUTTON_GETPROFILE).
         AddButton(_("Get Noise Profile"));
   }
   S.EndStatic();

   S.StartStatic(step2Label);
   {
      S.AddVariableText(step2Prompt);

      S.StartMultiColumn(3, wxEXPAND);
      S.SetStretchyCol(2);
      {
         mGainT = S.Id(ID_GAIN_TEXT).AddTextBox(_("Noise reduction (dB):"),
                                                wxT(""),
                                                0);
         S.SetStyle(wxSL_HORIZONTAL);
         mGainS = S.Id(ID_GAIN_SLIDER).AddSlider(wxT(""), 0, GAIN_MAX);
         mGainS->SetName(_("Noise reduction"));
         mGainS->SetRange(GAIN_MIN, GAIN_MAX);
         mGainS->SetSizeHints(150, -1);

         mFreqT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Frequency smoothing (Hz):"),
                                                wxT(""),
                                                0);
         S.SetStyle(wxSL_HORIZONTAL);
         mFreqS = S.Id(ID_FREQ_SLIDER).AddSlider(wxT(""), 0, FREQ_MAX);
         mFreqS->SetName(_("Frequency smoothing"));
         mFreqS->SetRange(FREQ_MIN, FREQ_MAX);
         mFreqS->SetSizeHints(150, -1);

         mTimeT = S.Id(ID_FREQ_TEXT).AddTextBox(_("Attack/decay time (secs):"),
                                                wxT(""),
                                                0);
         S.SetStyle(wxSL_HORIZONTAL);
         mTimeS = S.Id(ID_TIME_SLIDER).AddSlider(wxT(""), 0, TIME_MAX);
         mTimeS->SetName(_("Attach/decay time"));
         mTimeS->SetRange(TIME_MIN, TIME_MAX);
         mTimeS->SetSizeHints(150, -1);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
}
Exemple #24
0
void ChangePitchDialog::PopulateOrExchange(ShuttleGui & S)
{
   wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
   wxTextValidator numvld(wxFILTER_NUMERIC);
   wxArrayString pitch;

   pitch.Add(wxT("C"));
   pitch.Add(wxT("C#/Db"));
   pitch.Add(wxT("D"));
   pitch.Add(wxT("D#/Eb"));
   pitch.Add(wxT("E"));
   pitch.Add(wxT("F"));
   pitch.Add(wxT("F#/Gb"));
   pitch.Add(wxT("G"));
   pitch.Add(wxT("G#/Ab"));
   pitch.Add(wxT("A"));
   pitch.Add(wxT("A#/Bb"));
   pitch.Add(wxT("B"));

   S.SetBorder(10);
   S.StartHorizontalLay(wxCENTER, false);
   {
      S.AddTitle(_("Change Pitch without Changing Tempo") +
                 wxString(wxT("\n\n")) +
                 _("by Vaughan Johnson && Dominic Mazzoni") +
                 wxString(wxT("\n")) +
                 _("using SoundTouch, by Olli Parviainen"));
   }
   S.EndHorizontalLay();
   S.SetBorder(5);

   //
   S.StartMultiColumn(6, wxCENTER);
   {
      //
      S.AddUnits(_("Pitch:"));

      S.StartHorizontalLay(wxALIGN_CENTER_VERTICAL);
      {
         m_pChoice_FromPitch = S.Id(ID_CHOICE_FROMPITCH)
            .AddChoice(_("From:"), wxT(""), &pitch);
         m_pChoice_FromPitch->SetName(_("From Pitch"));
         m_pChoice_FromPitch->SetSizeHints(100, -1);
      }
      S.EndHorizontalLay();

      S.StartStatic(wxT(""));
      {
         S.StartVerticalLay();
         {
            S.SetBorder(3);
            m_pRadioButton_PitchUp = S.Id(ID_RADIOBUTTON_PITCHUPDOWN)
               .AddRadioButton(_("Up"));
         
            m_pRadioButton_PitchDown = S.Id(ID_RADIOBUTTON_PITCHUPDOWN)
               .AddRadioButtonToGroup(_("Down"));
            S.SetBorder(5);
         }
         S.EndVerticalLay();
      }
      S.EndStatic();

      S.StartHorizontalLay(wxALIGN_CENTER_VERTICAL);
      {
         m_pChoice_ToPitch = S.Id(ID_CHOICE_TOPITCH)
            .AddChoice(_("To:"), wxT(""), &pitch);
         m_pChoice_ToPitch->SetName(_("To Pitch"));
         m_pChoice_ToPitch->SetSizeHints(100, -1);
      }
      S.EndHorizontalLay();
   }
   S.EndMultiColumn();

   //
   S.StartMultiColumn(2, wxCENTER);
   {
      //
      S.AddPrompt(_("Semitones (half-steps):"));
      S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
      {
         m_pTextCtrl_SemitonesChange = S.Id(ID_TEXT_SEMITONESCHANGE)
            .AddTextBox(wxT(""), wxT(""), 12);
         m_pTextCtrl_SemitonesChange->SetName(_("Semitones in half-steps"));
         m_pTextCtrl_SemitonesChange->SetValidator(numvld);
      }
      S.EndHorizontalLay();

      //
      S.AddPrompt(_("Frequency (Hz):"));
      S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
      {
         m_pTextCtrl_FromFrequency = S.Id(ID_TEXT_FROMFREQUENCY)
            .AddTextBox(_("from"), wxT(""), 12);
         m_pTextCtrl_FromFrequency->SetName(_("From frequency in hertz"));
         m_pTextCtrl_FromFrequency->SetValidator(nullvld);

         m_pTextCtrl_ToFrequency = S.Id(ID_TEXT_TOFREQUENCY)
            .AddTextBox(_("to"), wxT(""), 12);
         m_pTextCtrl_ToFrequency->SetName(_("To frequency in seconds"));
         m_pTextCtrl_ToFrequency->SetValidator(numvld);
      }
      S.EndHorizontalLay();

      //
      S.AddPrompt(_("Percent Change:"));
      S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
      {
         m_pTextCtrl_PercentChange = S.Id(ID_TEXT_PERCENTCHANGE)
            .AddTextBox(wxT(""), wxT(""), 12);
         m_pTextCtrl_PercentChange->SetName(_("Percent Change"));
         m_pTextCtrl_PercentChange->SetValidator(numvld);
      }
      S.EndHorizontalLay();
   }
   S.EndMultiColumn();

   //
   S.StartHorizontalLay(wxEXPAND);
   {
      S.SetStyle(wxSL_HORIZONTAL);
      m_pSlider_PercentChange = S.Id(ID_SLIDER_PERCENTCHANGE)
         .AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
      m_pSlider_PercentChange->SetName(_("Percent Change"));
   }
   S.EndHorizontalLay();

   return;
}
Exemple #25
0
void EffectWahwah::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(5);
   S.AddSpace(0, 5);

   S.StartMultiColumn(3, wxEXPAND);
   {
      S.SetStretchyCol(2);

      FloatingPointValidator<double> vldfreq(5, &mFreq, NumValidatorStyle::ONE_TRAILING_ZERO);
      vldfreq.SetRange(MIN_Freq, MAX_Freq);
      mFreqT = S.Id(ID_Freq).AddTextBox(_("LFO Freq&uency (Hz):"), wxT(""), 12);
      mFreqT->SetValidator(vldfreq);

      S.SetStyle(wxSL_HORIZONTAL);
      mFreqS = S.Id(ID_Freq).AddSlider( {}, DEF_Freq * SCL_Freq, MAX_Freq * SCL_Freq, MIN_Freq * SCL_Freq);
      mFreqS->SetName(_("LFO frequency in hertz"));
      mFreqS->SetMinSize(wxSize(100, -1));

      FloatingPointValidator<double> vldphase(1, &mPhase);
      vldphase.SetRange(MIN_Phase, MAX_Phase);
      mPhaseT = S.Id(ID_Phase).AddTextBox(_("LFO Sta&rt Phase (deg.):"), wxT(""), 12);
      mPhaseT->SetValidator(vldphase);

      S.SetStyle(wxSL_HORIZONTAL);
      mPhaseS = S.Id(ID_Phase).AddSlider( {}, DEF_Phase * SCL_Phase, MAX_Phase * SCL_Phase, MIN_Phase * SCL_Phase);
      mPhaseS->SetName(_("LFO start phase in degrees"));
      mPhaseS->SetLineSize(10);
      mPhaseS->SetMinSize(wxSize(100, -1));

      IntegerValidator<int> vlddepth(&mDepth);
      vlddepth.SetRange(MIN_Depth, MAX_Depth);
      mDepthT = S.Id(ID_Depth).AddTextBox(_("Dept&h (%):"), wxT(""), 12);
      mDepthT->SetValidator(vlddepth);

      S.SetStyle(wxSL_HORIZONTAL);
      mDepthS = S.Id(ID_Depth).AddSlider( {}, DEF_Depth * SCL_Depth, MAX_Depth * SCL_Depth, MIN_Depth * SCL_Depth);
      mDepthS->SetName(_("Depth in percent"));
      mDepthS->SetMinSize(wxSize(100, -1));

      FloatingPointValidator<double> vldres(1, &mRes);
      vldres.SetRange(MIN_Res, MAX_Res);
      mResT = S.Id(ID_Res).AddTextBox(_("Reso&nance:"), wxT(""), 12);
      mResT->SetValidator(vldres);

      S.SetStyle(wxSL_HORIZONTAL);
      mResS = S.Id(ID_Res).AddSlider( {}, DEF_Res * SCL_Res, MAX_Res * SCL_Res, MIN_Res * SCL_Res);
      mResS->SetName(_("Resonance"));
      mResS->SetMinSize(wxSize(100, -1));

      IntegerValidator<int> vldfreqoffset(&mFreqOfs);
      vldfreqoffset.SetRange(MIN_FreqOfs, MAX_FreqOfs);
      mFreqOfsT = S.Id(ID_FreqOfs).AddTextBox(_("Wah Frequency Offse&t (%):"), wxT(""), 12);
      mFreqOfsT->SetValidator(vldfreqoffset);

      S.SetStyle(wxSL_HORIZONTAL);
      mFreqOfsS = S.Id(ID_FreqOfs).AddSlider( {}, DEF_FreqOfs * SCL_FreqOfs, MAX_FreqOfs * SCL_FreqOfs, MIN_FreqOfs * SCL_FreqOfs);
      mFreqOfsT->SetName(_("Wah frequency offset in percent"));
      mFreqOfsT->SetMinSize(wxSize(100, -1));

      FloatingPointValidator<double> vldoutgain(1, &mOutGain);
      vldoutgain.SetRange(MIN_OutGain, MAX_OutGain);
      mOutGainT = S.Id(ID_OutGain).AddTextBox(_("&Output gain (dB):"), wxT(""), 12);
      mOutGainT->SetValidator(vldoutgain);

      S.SetStyle(wxSL_HORIZONTAL);
      mOutGainS = S.Id(ID_OutGain).AddSlider( {}, DEF_OutGain * SCL_OutGain, MAX_OutGain * SCL_OutGain, MIN_OutGain * SCL_OutGain);
      mOutGainS->SetName(_("Output gain (dB)"));
      mOutGainS->SetMinSize(wxSize(100, -1));
   }
   S.EndMultiColumn();
}
Exemple #26
0
void EffectChangeSpeed::PopulateOrExchange(ShuttleGui & S)
{
   GetPrivateConfig(GetCurrentSettingsGroup(), wxT("TimeFormat"), mFormat, mFormat);
   GetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl, mFromVinyl);

   S.SetBorder(5);

   S.StartVerticalLay(0);
   {
      S.AddSpace(0, 5);
      S.AddTitle(_("Change Speed, affecting both Tempo and Pitch"));
      S.AddSpace(0, 10);

      // Speed multiplier and percent change controls.
      S.StartMultiColumn(4, wxCENTER);
      {
         FloatingPointValidator<double> vldMultiplier(3, &mMultiplier, NUM_VAL_THREE_TRAILING_ZEROES);
         vldMultiplier.SetRange(MIN_Percentage / 100.0, ((MAX_Percentage / 100.0) + 1));
         mpTextCtrl_Multiplier =
            S.Id(ID_Multiplier).AddTextBox(_("Speed Multiplier:"), wxT(""), 12);
         mpTextCtrl_Multiplier->SetValidator(vldMultiplier);

         FloatingPointValidator<double> vldPercentage(3, &m_PercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
         vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
         mpTextCtrl_PercentChange =
            S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
         mpTextCtrl_PercentChange->SetValidator(vldPercentage);
      }
      S.EndMultiColumn();

      // Percent change slider.
      S.StartHorizontalLay(wxEXPAND);
      {
         S.SetStyle(wxSL_HORIZONTAL);
         mpSlider_PercentChange =
            S.Id(ID_PercentChange).AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
         mpSlider_PercentChange->SetName(_("Percent Change"));
      }
      S.EndHorizontalLay();

      // Vinyl rpm controls.
      S.StartMultiColumn(5, wxCENTER);
      {
         /* i18n-hint: "rpm" is an English abbreviation meaning "revolutions per minute". */
         S.AddUnits(_("Standard Vinyl rpm:"));

         wxASSERT(kNumVinyl == WXSIZEOF(kVinylStrings));

         wxArrayString vinylChoices;
         for (int i = 0; i < kNumVinyl; i++)
         {
            if (i == kVinyl_NA)
            {
               vinylChoices.Add(wxGetTranslation(kVinylStrings[i]));
            }
            else
            {
               vinylChoices.Add(kVinylStrings[i]);
            }
         }

         mpChoice_FromVinyl =
            S.Id(ID_FromVinyl).AddChoice(_("from"), wxT(""), &vinylChoices);
         mpChoice_FromVinyl->SetName(_("From rpm"));
         mpChoice_FromVinyl->SetSizeHints(100, -1);

         mpChoice_ToVinyl =
            S.Id(ID_ToVinyl).AddChoice(_("to"), wxT(""), &vinylChoices);
         mpChoice_ToVinyl->SetName(_("To rpm"));
         mpChoice_ToVinyl->SetSizeHints(100, -1);
      }
      S.EndMultiColumn();

      // From/To time controls.
      S.StartStatic(_("Selection Length"), 0);
      {
         S.StartMultiColumn(2, wxALIGN_LEFT);
         {
            S.AddPrompt(_("Current Length:"));

            mpFromLengthCtrl = safenew
                  NumericTextCtrl(NumericConverter::TIME,
                                 S.GetParent(),
                                 wxID_ANY,
                                 mFormat,
                                 mFromLength,
                                 mProjectRate);

            mpFromLengthCtrl->SetName(_("from"));
            mpFromLengthCtrl->SetToolTip(_("Current length of selection."));
            mpFromLengthCtrl->SetReadOnly(true);
            mpFromLengthCtrl->EnableMenu(false);
            S.AddWindow(mpFromLengthCtrl, wxALIGN_LEFT);

            S.AddPrompt(_("New Length:"));

            mpToLengthCtrl = safenew
                  NumericTextCtrl(NumericConverter::TIME,
                                 S.GetParent(),
                                 ID_ToLength,
                                 mFormat,
                                 mToLength,
                                 mProjectRate);

            mpToLengthCtrl->SetName(_("to"));
            mpToLengthCtrl->EnableMenu();
            S.AddWindow(mpToLengthCtrl, wxALIGN_LEFT);
         }
         S.EndMultiColumn();
      }
      S.EndStatic();
   }
   S.EndVerticalLay();
}
Exemple #27
0
void BassTrebleDialog::PopulateOrExchange(ShuttleGui & S)
{
   S.StartStatic(wxT(""));
   {
      S.StartMultiColumn(3, wxEXPAND);
      S.SetStretchyCol(2);
      {
         #ifdef __WXGTK__
         // BoxSizer is to make first mnemonic work, on Linux.
         wxPanel* cPanel = new wxPanel( this, wxID_ANY );
         wxBoxSizer* cSizer = new wxBoxSizer(wxVERTICAL);
         cPanel->SetSizer(cSizer);
         #endif

         wxTextValidator vld(wxFILTER_NUMERIC);

         // Bass control
         mBassT = S.Id(ID_BASS_TEXT).AddTextBox(_("&Bass (dB):"), wxT(""), 10);
         mBassT->SetName(_("Bass (dB):"));
         mBassT->SetValidator(vld);

         S.SetStyle(wxSL_HORIZONTAL);
         mBassS = S.Id(ID_BASS_SLIDER).AddSlider(wxT(""), 0, BASS_MAX, BASS_MIN);
         mBassS->SetName(_("Bass"));
         mBassS->SetRange(BASS_MIN, BASS_MAX);
         mBassS->SetPageSize(30);
         
         // Treble control
         mTrebleT = S.Id(ID_TREBLE_TEXT).AddTextBox(_("&Treble (dB):"), wxT(""), 10);
         mTrebleT->SetValidator(vld);

         S.SetStyle(wxSL_HORIZONTAL);
         mTrebleS = S.Id(ID_TREBLE_SLIDER).AddSlider(wxT(""), 0, TREBLE_MAX, TREBLE_MIN);
         mTrebleS->SetName(_("Treble"));
         mTrebleS->SetRange(TREBLE_MIN, TREBLE_MAX);
         mTrebleS->SetPageSize(30);
      
         // Level control
         mLevelT = S.Id(ID_LEVEL_TEXT).AddTextBox(_("&Level (dB):"), wxT(""), 10);
         mLevelT->SetValidator(vld);

         S.SetStyle(wxSL_HORIZONTAL);
         mLevelS = S.Id(ID_LEVEL_SLIDER).AddSlider(wxT(""), 0, LEVEL_MAX, LEVEL_MIN);
         mLevelS->SetName(_("Level"));
         mLevelS->SetRange(LEVEL_MIN, LEVEL_MAX);
         mLevelS->SetPageSize(30);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   // Normalize checkbox
   S.StartHorizontalLay(wxLEFT, true);
   {
      mNormalizeCheckBox = S.Id(ID_NORMALIZE).AddCheckBox(_("&Enable level control"),
                                    mbNormalize ? wxT("true") : wxT("false"));
      mWarning = S.AddVariableText( wxT(""), false,
                                    wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
   }
   S.EndHorizontalLay();

}
Exemple #28
0
void EffectCompressor::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(5);

   S.StartHorizontalLay(wxEXPAND, true);
   {
      S.SetBorder(10);
      mPanel = safenew EffectCompressorPanel(S.GetParent(),
                                         mThresholdDB,
                                         mNoiseFloorDB,
                                         mRatio);
      mPanel->SetMinSize(wxSize(400, 200));
      S.Prop(true).AddWindow(mPanel, wxEXPAND | wxALL);
      S.SetBorder(5);
   }
   S.EndHorizontalLay();

   S.StartStatic(wxT(""));
   {
      S.StartMultiColumn(3, wxEXPAND);
      {
         S.SetStretchyCol(1);
         mThresholdLabel = S.AddVariableText(_("Threshold:"), true,
                                             wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
         S.SetStyle(wxSL_HORIZONTAL);
         mThresholdSlider = S.Id(ID_Threshold).AddSlider(wxT(""),
                                                         DEF_Threshold * SCL_Threshold,
                                                         MAX_Threshold * SCL_Threshold,
                                                         MIN_Threshold * SCL_Threshold);
         mThresholdSlider->SetName(_("Threshold"));
         mThresholdText = S.AddVariableText(wxT("XXX dB"), true,
                                            wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);

         mNoiseFloorLabel = S.AddVariableText(_("Noise Floor:"), true,
                                             wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
         S.SetStyle(wxSL_HORIZONTAL);
         mNoiseFloorSlider = S.Id(ID_NoiseFloor).AddSlider(wxT(""),
                                                           DEF_NoiseFloor / SCL_NoiseFloor,
                                                           MAX_NoiseFloor / SCL_NoiseFloor,
                                                           MIN_NoiseFloor / SCL_NoiseFloor);
         mNoiseFloorSlider->SetName(_("Noise Floor"));
         mNoiseFloorText = S.AddVariableText(wxT("XXX dB"), true,
                                            wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);

         mRatioLabel = S.AddVariableText(_("Ratio:"), true,
                                         wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
         S.SetStyle(wxSL_HORIZONTAL);
         mRatioSlider = S.Id(ID_Ratio).AddSlider(wxT(""),
                                                 DEF_Ratio * SCL_Ratio,
                                                 MAX_Ratio * SCL_Ratio,
                                                 MIN_Ratio * SCL_Ratio);
         mRatioSlider->SetName(_("Ratio"));
         mRatioSlider->SetPageSize(5);
         mRatioText = S.AddVariableText(wxT("XXXX:1"), true,
                                             wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);

         /* i18n-hint: Particularly in percussion, sounds can be regarded as having
          * an 'attack' phase where the sound builds up and a 'decay' where the
          * sound dies away.  So this means 'onset duration'.  */
         mAttackLabel = S.AddVariableText(_("Attack Time:"), true,
                                         wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
         S.SetStyle(wxSL_HORIZONTAL);
         mAttackSlider = S.Id(ID_Attack).AddSlider(wxT(""),
                                                   DEF_AttackTime * SCL_AttackTime,
                                                   MAX_AttackTime * SCL_AttackTime,
                                                   MIN_AttackTime * SCL_AttackTime);
         mAttackSlider->SetName(_("Attack Time"));
         mAttackText = S.AddVariableText(wxT("XXXX secs"), true,
                                         wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);

         mDecayLabel = S.AddVariableText(_("Release Time:"), true,
                                         wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
         S.SetStyle(wxSL_HORIZONTAL);
         mDecaySlider = S.Id(ID_Decay).AddSlider(wxT(""),
                                                 DEF_ReleaseTime * SCL_ReleaseTime,
                                                 MAX_ReleaseTime * SCL_ReleaseTime,
                                                 MIN_ReleaseTime * SCL_ReleaseTime);
         mDecaySlider->SetName(_("Release Time"));
         mDecayText = S.AddVariableText(wxT("XXXX secs"), true,
                                        wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   S.StartHorizontalLay(wxCENTER, false);
   {
      /* i18n-hint: Make-up, i.e. correct for any reduction, rather than fabricate it.*/
      mGainCheckBox = S.AddCheckBox(_("Make-up gain for 0 dB after compressing"),
                                    DEF_Normalize ? wxT("true") : wxT("false"));
      mPeakCheckBox = S.AddCheckBox(_("Compress based on Peaks"),
                                    DEF_UsePeak ? wxT("true") : wxT("false"));
   }
   S.EndHorizontalLay();
}
Exemple #29
0
void EffectChangePitch::PopulateOrExchange(ShuttleGui & S)
{
   DeduceFrequencies(); // Set frequency-related control values based on sample.

   wxArrayString pitch;
   pitch.Add(wxT("C"));
   pitch.Add(wxT("C#/Db"));
   pitch.Add(wxT("D"));
   pitch.Add(wxT("D#/Eb"));
   pitch.Add(wxT("E"));
   pitch.Add(wxT("F"));
   pitch.Add(wxT("F#/Gb"));
   pitch.Add(wxT("G"));
   pitch.Add(wxT("G#/Ab"));
   pitch.Add(wxT("A"));
   pitch.Add(wxT("A#/Bb"));
   pitch.Add(wxT("B"));

   S.SetBorder(5);

   S.StartVerticalLay(0);
   {
      S.StartVerticalLay();
      {
         S.AddTitle(_("Change Pitch without Changing Tempo"));
         S.AddTitle(
            wxString::Format(_("Estimated Start Pitch: %s%d (%.3f Hz)"),
                              pitch[m_nFromPitch].c_str(), m_nFromOctave, m_FromFrequency));
      }
      S.EndVerticalLay();

      /* i18n-hint: (noun) Musical pitch.*/
      S.StartStatic(_("Pitch"));
      {
         S.StartMultiColumn(6, wxALIGN_CENTER); // 6 controls, because each AddChoice adds a wxStaticText and a wxChoice.
         {
            m_pChoice_FromPitch = S.Id(ID_FromPitch).AddChoice(_("from"), wxT(""), &pitch);
            m_pChoice_FromPitch->SetName(_("from"));
            m_pChoice_FromPitch->SetSizeHints(80, -1);

            m_pSpin_FromOctave = S.Id(ID_FromOctave).AddSpinCtrl(wxT(""), m_nFromOctave, INT_MAX, INT_MIN);
            m_pSpin_FromOctave->SetName(_("from Octave"));
            m_pSpin_FromOctave->SetSizeHints(50, -1);

            m_pChoice_ToPitch = S.Id(ID_ToPitch).AddChoice(_("to"), wxT(""), &pitch);
            m_pChoice_ToPitch->SetName(_("to"));
            m_pChoice_ToPitch->SetSizeHints(80, -1);

            m_pSpin_ToOctave =
               S.Id(ID_ToOctave).AddSpinCtrl(wxT(""), m_nToOctave, INT_MAX, INT_MIN);
            m_pSpin_ToOctave->SetName(_("to Octave"));
            m_pSpin_ToOctave->SetSizeHints(50, -1);
         }
         S.EndMultiColumn();

         S.StartHorizontalLay(wxALIGN_CENTER);
         {
            FloatingPointValidator<double> vldSemitones(2, &m_dSemitonesChange, NUM_VAL_TWO_TRAILING_ZEROES);
            m_pTextCtrl_SemitonesChange =
               S.Id(ID_SemitonesChange).AddTextBox(_("Semitones (half-steps):"), wxT(""), 12);
            m_pTextCtrl_SemitonesChange->SetName(_("Semitones (half-steps)"));
            m_pTextCtrl_SemitonesChange->SetValidator(vldSemitones);
         }
         S.EndHorizontalLay();
      }
      S.EndStatic();

      S.StartStatic(_("Frequency"));
      {
         S.StartMultiColumn(5, wxALIGN_CENTER); // 5, because AddTextBox adds a wxStaticText and a wxTextCtrl.
         {
            FloatingPointValidator<double> vldFromFrequency(3, &m_FromFrequency, NUM_VAL_THREE_TRAILING_ZEROES);
            vldFromFrequency.SetMin(0.0);
            m_pTextCtrl_FromFrequency = S.Id(ID_FromFrequency).AddTextBox(_("from"), wxT(""), 12);
            m_pTextCtrl_FromFrequency->SetName(_("from (Hz)"));
            m_pTextCtrl_FromFrequency->SetValidator(vldFromFrequency);

            FloatingPointValidator<double> vldToFrequency(3, &m_ToFrequency, NUM_VAL_THREE_TRAILING_ZEROES);
            vldToFrequency.SetMin(0.0);
            m_pTextCtrl_ToFrequency = S.Id(ID_ToFrequency).AddTextBox(_("to"), wxT(""), 12);
            m_pTextCtrl_ToFrequency->SetName(_("to (Hz)"));
            m_pTextCtrl_ToFrequency->SetValidator(vldToFrequency);

            S.AddUnits(_("Hz"));
         }
         S.EndMultiColumn();

         S.StartHorizontalLay(wxALIGN_CENTER);
         {
            FloatingPointValidator<double> vldPercentage(3, &m_dPercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
            vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
            m_pTextCtrl_PercentChange = S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
            m_pTextCtrl_PercentChange->SetValidator(vldPercentage);
         }
         S.EndHorizontalLay();

         S.StartHorizontalLay(wxEXPAND);
         {
            S.SetStyle(wxSL_HORIZONTAL);
            m_pSlider_PercentChange = S.Id(ID_PercentChange)
               .AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
            m_pSlider_PercentChange->SetName(_("Percent Change"));
         }
         S.EndHorizontalLay();
      }
      S.EndStatic();
   }
   S.EndVerticalLay();

   return;
}
Exemple #30
0
void EffectBassTreble::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(5);
   S.AddSpace(0, 5);

   S.StartStatic(_("Tone controls"));
   {
      S.StartMultiColumn(3, wxEXPAND);
      {
         S.SetStretchyCol(2);

         // Bass control
         FloatingPointValidator<double> vldBass(1, &mBass);
         vldBass.SetRange(MIN_Bass, MAX_Bass);
         mBassT = S.Id(ID_Bass).AddTextBox(_("Ba&ss (dB):"), wxT(""), 10);
         mBassT->SetName(_("Bass (dB):"));
         mBassT->SetValidator(vldBass);

         S.SetStyle(wxSL_HORIZONTAL);
         mBassS = S.Id(ID_Bass).AddSlider( {}, 0, MAX_Bass * SCL_Bass, MIN_Bass * SCL_Bass);
         mBassS->SetName(_("Bass"));

         // Treble control
         FloatingPointValidator<double> vldTreble(1, &mTreble);
         vldTreble.SetRange(MIN_Treble, MAX_Treble);
         mTrebleT = S.Id(ID_Treble).AddTextBox(_("&Treble (dB):"), wxT(""), 10);
         mTrebleT->SetValidator(vldTreble);

         S.SetStyle(wxSL_HORIZONTAL);
         mTrebleS = S.Id(ID_Treble).AddSlider( {}, 0, MAX_Treble * SCL_Treble, MIN_Treble * SCL_Treble);
         mTrebleS->SetName(_("Treble"));
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   S.StartStatic(_("Output"));
   {
      S.StartMultiColumn(3, wxEXPAND);
      {
         S.SetStretchyCol(2);

         // Gain control
         FloatingPointValidator<double> vldGain(1, &mGain);
         vldGain.SetRange(MIN_Gain, MAX_Gain);
         mGainT = S.Id(ID_Gain).AddTextBox(_("&Volume (dB):"), wxT(""), 10);
         mGainT->SetValidator(vldGain);

         S.SetStyle(wxSL_HORIZONTAL);
         mGainS = S.Id(ID_Gain).AddSlider( {}, 0, MAX_Gain * SCL_Gain, MIN_Gain * SCL_Gain);
         mGainS->SetName(_("Level"));
      }
      S.EndMultiColumn();

      S.StartMultiColumn(2, wxCENTER);
      {
         // Link checkbox
         mLinkCheckBox = S.Id(ID_Link).AddCheckBox(_("&Link Volume control to Tone controls"),
                                          DEF_Link ? wxT("true") : wxT("false"));
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
}