void PCB_EDIT_FRAME::Swap_Layers( wxCommandEvent& event )
{
PCB_LAYER_ID new_layer[PCB_LAYER_ID_COUNT];
DIALOG_SWAP_LAYERS dlg( this, new_layer );
if( dlg.ShowModal() != wxID_OK )
return;
BOARD_COMMIT commit( this );
bool hasChanges = false;
// Change tracks.
for( TRACK* segm = GetBoard()->m_Track; segm; segm = segm->Next() )
{
if( segm->Type() == PCB_VIA_T )
{
VIA* via = (VIA*) segm;
PCB_LAYER_ID top_layer, bottom_layer;
if( via->GetViaType() == VIA_THROUGH )
continue;
via->LayerPair( &top_layer, &bottom_layer );
if( new_layer[bottom_layer] != bottom_layer || new_layer[top_layer] != top_layer )
{
commit.Modify( via );
via->SetLayerPair( new_layer[top_layer], new_layer[bottom_layer] );
GetGalCanvas()->GetView()->Update( via, KIGFX::GEOMETRY );
hasChanges = true;
}
}
else
{
hasChanges |= processBoardItem( this, commit, segm, new_layer );
}
}
for( BOARD_ITEM* zone : GetBoard()->Zones() )
{
hasChanges |= processBoardItem( this, commit, zone, new_layer );
}
for( BOARD_ITEM* drawing : GetBoard()->Drawings() )
{
hasChanges |= processBoardItem( this, commit, drawing, new_layer );
}
if( hasChanges )
{
OnModify();
commit.Push( "Layers moved" );
GetCanvas()->Refresh();
}
}
/* Extract the D356 record from the vias */
static void build_via_testpoints( BOARD *aPcb,
std::vector <D356_RECORD>& aRecords )
{
wxPoint origin = aPcb->GetAuxOrigin();
// Enumerate all the track segments and keep the vias
for( TRACK *track = aPcb->m_Track; track; track = track->Next() )
{
if( track->Type() == PCB_VIA_T )
{
VIA *via = (VIA*) track;
NETINFO_ITEM *net = track->GetNet();
D356_RECORD rk;
rk.smd = false;
rk.hole = true;
if( net )
rk.netname = net->GetNetname();
else
rk.netname = wxEmptyString;
rk.refdes = wxT("VIA");
rk.pin = wxT("");
rk.midpoint = true; // Vias are always midpoints
rk.drill = via->GetDrillValue();
rk.mechanical = false;
LAYER_ID top_layer, bottom_layer;
via->LayerPair( &top_layer, &bottom_layer );
rk.access = via_access_code( aPcb, top_layer, bottom_layer );
rk.x_location = via->GetPosition().x - origin.x;
rk.y_location = origin.y - via->GetPosition().y;
rk.x_size = via->GetWidth();
rk.y_size = 0; // Round so height = 0
rk.rotation = 0;
rk.soldermask = 3; // XXX always tented?
aRecords.push_back( rk );
}
}
}
std::vector<LAYER_PAIR> EXCELLON_WRITER::getUniqueLayerPairs() const
{
wxASSERT( m_pcb );
static const KICAD_T interesting_stuff_to_collect[] = {
PCB_VIA_T,
EOT
};
PCB_TYPE_COLLECTOR vias;
vias.Collect( m_pcb, interesting_stuff_to_collect );
std::set< LAYER_PAIR > unique;
LAYER_PAIR layer_pair;
for( int i = 0; i < vias.GetCount(); ++i )
{
VIA* v = (VIA*) vias[i];
v->LayerPair( &layer_pair.first, &layer_pair.second );
// only make note of blind buried.
// thru hole is placed unconditionally as first in fetched list.
if( layer_pair != LAYER_PAIR( F_Cu, B_Cu ) )
{
unique.insert( layer_pair );
}
}
std::vector<LAYER_PAIR> ret;
ret.push_back( LAYER_PAIR( F_Cu, B_Cu ) ); // always first in returned list
for( std::set< LAYER_PAIR >::const_iterator it = unique.begin(); it != unique.end(); ++it )
ret.push_back( *it );
return ret;
}
void EXCELLON_WRITER::BuildHolesList( LAYER_PAIR aLayerPair,
bool aGenerateNPTH_list )
{
HOLE_INFO new_hole;
m_holeListBuffer.clear();
m_toolListBuffer.clear();
wxASSERT( aLayerPair.first < aLayerPair.second ); // fix the caller
// build hole list for vias
if( ! aGenerateNPTH_list ) // vias are always plated !
{
for( VIA* via = GetFirstVia( m_pcb->m_Track ); via; via = GetFirstVia( via->Next() ) )
{
int hole_sz = via->GetDrillValue();
if( hole_sz == 0 ) // Should not occur.
continue;
new_hole.m_Tool_Reference = -1; // Flag value for Not initialized
new_hole.m_Hole_Orient = 0;
new_hole.m_Hole_Diameter = hole_sz;
new_hole.m_Hole_NotPlated = false;
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Pos = via->GetStart();
via->LayerPair( &new_hole.m_Hole_Top_Layer, &new_hole.m_Hole_Bottom_Layer );
// LayerPair() returns params with m_Hole_Bottom_Layer > m_Hole_Top_Layer
// Remember: top layer = 0 and bottom layer = 31 for through hole vias
// Any captured via should be from aLayerPair.first to aLayerPair.second exactly.
if( new_hole.m_Hole_Top_Layer != aLayerPair.first ||
new_hole.m_Hole_Bottom_Layer != aLayerPair.second )
continue;
m_holeListBuffer.push_back( new_hole );
}
}
if( aLayerPair == LAYER_PAIR( F_Cu, B_Cu ) )
{
// add holes for thru hole pads
for( MODULE* module = m_pcb->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( !m_merge_PTH_NPTH )
{
if( !aGenerateNPTH_list && pad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED )
continue;
if( aGenerateNPTH_list && pad->GetAttribute() != PAD_ATTRIB_HOLE_NOT_PLATED )
continue;
}
if( pad->GetDrillSize().x == 0 )
continue;
new_hole.m_Hole_NotPlated = (pad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED);
new_hole.m_Tool_Reference = -1; // Flag is: Not initialized
new_hole.m_Hole_Orient = pad->GetOrientation();
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Diameter = std::min( pad->GetDrillSize().x, pad->GetDrillSize().y );
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
if( pad->GetDrillShape() != PAD_DRILL_SHAPE_CIRCLE )
new_hole.m_Hole_Shape = 1; // oval flag set
new_hole.m_Hole_Size = pad->GetDrillSize();
new_hole.m_Hole_Pos = pad->GetPosition(); // hole position
new_hole.m_Hole_Bottom_Layer = B_Cu;
new_hole.m_Hole_Top_Layer = F_Cu; // pad holes are through holes
m_holeListBuffer.push_back( new_hole );
}
}
}
// Sort holes per increasing diameter value
sort( m_holeListBuffer.begin(), m_holeListBuffer.end(), CmpHoleSettings );
// build the tool list
int last_hole = -1; // Set to not initialized (this is a value not used
// for m_holeListBuffer[ii].m_Hole_Diameter)
bool last_notplated_opt = false;
DRILL_TOOL new_tool( 0, false );
unsigned jj;
for( unsigned ii = 0; ii < m_holeListBuffer.size(); ii++ )
{
if( m_holeListBuffer[ii].m_Hole_Diameter != last_hole ||
m_holeListBuffer[ii].m_Hole_NotPlated != last_notplated_opt )
{
new_tool.m_Diameter = m_holeListBuffer[ii].m_Hole_Diameter;
new_tool.m_Hole_NotPlated = m_holeListBuffer[ii].m_Hole_NotPlated;
m_toolListBuffer.push_back( new_tool );
last_hole = new_tool.m_Diameter;
last_notplated_opt = new_tool.m_Hole_NotPlated;
}
jj = m_toolListBuffer.size();
if( jj == 0 )
continue; // Should not occurs
m_holeListBuffer[ii].m_Tool_Reference = jj; // Tool value Initialized (value >= 1)
m_toolListBuffer.back().m_TotalCount++;
if( m_holeListBuffer[ii].m_Hole_Shape )
m_toolListBuffer.back().m_OvalCount++;
}
}
void EXCELLON_WRITER::BuildHolesList( int aFirstLayer,
int aLastLayer,
bool aExcludeThroughHoles,
bool aGenerateNPTH_list,
bool aMerge_PTH_NPTH )
{
HOLE_INFO new_hole;
int hole_value;
m_holeListBuffer.clear();
m_toolListBuffer.clear();
if( (aFirstLayer >= 0) && (aLastLayer >= 0) )
{
if( aFirstLayer > aLastLayer )
std::swap( aFirstLayer, aLastLayer );
}
if ( aGenerateNPTH_list && aMerge_PTH_NPTH )
{
return;
}
// build hole list for vias
if( ! aGenerateNPTH_list ) // vias are always plated !
{
for( VIA* via = GetFirstVia( m_pcb->m_Track ); via; via = GetFirstVia( via->Next() ) )
{
hole_value = via->GetDrillValue();
if( hole_value == 0 ) // Should not occur.
continue;
new_hole.m_Tool_Reference = -1; // Flag value for Not initialized
new_hole.m_Hole_Orient = 0;
new_hole.m_Hole_Diameter = hole_value;
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Pos = via->GetStart();
via->LayerPair( &new_hole.m_Hole_Top_Layer, &new_hole.m_Hole_Bottom_Layer );
// LayerPair return params with m_Hole_Bottom_Layer > m_Hole_Top_Layer
// Remember: top layer = 0 and bottom layer = 31 for through hole vias
// the via should be at least from aFirstLayer to aLastLayer
if( (new_hole.m_Hole_Top_Layer > aFirstLayer) && (aFirstLayer >= 0) )
continue; // via above the first layer
if( (new_hole.m_Hole_Bottom_Layer < aLastLayer) && (aLastLayer >= 0) )
continue; // via below the last layer
if( aExcludeThroughHoles && (new_hole.m_Hole_Bottom_Layer == B_Cu)
&& (new_hole.m_Hole_Top_Layer == F_Cu) )
continue;
m_holeListBuffer.push_back( new_hole );
}
}
// build hole list for pads (assumed always through holes)
if( !aExcludeThroughHoles || aGenerateNPTH_list )
{
for( MODULE* module = m_pcb->m_Modules; module; module = module->Next() )
{
// Read and analyse pads
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( ! aGenerateNPTH_list &&
pad->GetAttribute() == PAD_HOLE_NOT_PLATED &&
! aMerge_PTH_NPTH )
continue;
if( aGenerateNPTH_list && pad->GetAttribute() != PAD_HOLE_NOT_PLATED )
continue;
if( pad->GetDrillSize().x == 0 )
continue;
new_hole.m_Hole_NotPlated = (pad->GetAttribute() == PAD_HOLE_NOT_PLATED);
new_hole.m_Tool_Reference = -1; // Flag is: Not initialized
new_hole.m_Hole_Orient = pad->GetOrientation();
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Diameter = std::min( pad->GetDrillSize().x, pad->GetDrillSize().y );
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
if( pad->GetDrillShape() != PAD_DRILL_CIRCLE )
new_hole.m_Hole_Shape = 1; // oval flag set
new_hole.m_Hole_Size = pad->GetDrillSize();
new_hole.m_Hole_Pos = pad->GetPosition(); // hole position
new_hole.m_Hole_Bottom_Layer = B_Cu;
new_hole.m_Hole_Top_Layer = F_Cu;// pad holes are through holes
m_holeListBuffer.push_back( new_hole );
}
}
}
// Sort holes per increasing diameter value
sort( m_holeListBuffer.begin(), m_holeListBuffer.end(), CmpHoleDiameterValue );
// build the tool list
int LastHole = -1; /* Set to not initialized (this is a value not used
* for m_holeListBuffer[ii].m_Hole_Diameter) */
DRILL_TOOL new_tool( 0 );
unsigned jj;
for( unsigned ii = 0; ii < m_holeListBuffer.size(); ii++ )
{
if( m_holeListBuffer[ii].m_Hole_Diameter != LastHole )
{
new_tool.m_Diameter = ( m_holeListBuffer[ii].m_Hole_Diameter );
m_toolListBuffer.push_back( new_tool );
LastHole = new_tool.m_Diameter;
}
jj = m_toolListBuffer.size();
if( jj == 0 )
continue; // Should not occurs
m_holeListBuffer[ii].m_Tool_Reference = jj; // Tool value Initialized (value >= 1)
m_toolListBuffer.back().m_TotalCount++;
if( m_holeListBuffer[ii].m_Hole_Shape )
m_toolListBuffer.back().m_OvalCount++;
}
}